Search

The surface properties of BiPO4 exert a significant effect on the photocatalytic performance under ultraviolet irradiation, but they have not been well explored, either experimentally or theoretically. Herein, for the first time, we systematically studied the structures and energetics of four low-index stoichiometric surfaces of monazite BiPO4 using density functional theory. A new scheme is proposed to correct the surface energy and compare this with the average surface energy. Both of the two schemes for the surface energies indicate that the order of the surface energies is (100) < (010) < (011) < (001), which is not completely consistent with their surface dangling bond densities. The main reason is incomplete PO4 tetrahedrons, namely, the existence of dangling P–O bonds in the bare (001) plane. However, only dangling Bi–O bonds are found in the other three low-index surfaces. It is obvious that the dangling bond density of the Bi atoms and the intact PO4 tetrahedrons are two crucial factors in the surface stability. Correspondingly, the differences in the planar-averaged electron density and the work function are presented to describe the charge distribution close to the surface. Furthermore, the equilibrium morphology calculated using the Wulff construction suggests that the (001), (010), (011) and (100) facets account for 15%, 33%, 16% and 36%, respectively. The two low-energy (100) and (010) facets dominate in the Wulff shape and make up almost 69% of the total crystal shape area. This work will provide theoretical guidance for the further design of effective BiPO4-based photocatalysts. [ABSTRACT FROM AUTHOR]

Controlling the p-type electrical transport behavior of nanoelectronic devices remains a grand challenge in reducing the Schottky barrier. To address this issue, we systematically investigate the effect of asymmetric Se doping on the interlayer interaction and electronic properties of a MoS2(1−x)Se2x/graphene heterostructure by first-principles calculations incorporating a semiempirical dispersion–correction scheme. The results show that the interfacial binding can be enhanced by Se doping inside the interface, while the effect of Se doping outside the interface is negligible on the interfacial binding. The type and height of the Schottky barrier can be tuned by changing the concentration and sites of the Se dopant at the interface. Further, it is found that by increasing the concentration of the Se dopant inside the interface the transition from an n-type Schottky barrier to a p-type can be realized, and a low p-type Schottky barrier is gained at the interface for highly efficient charge transfer. Lastly, it is confirmed that the redistribution of the interfacial charge leads to a shift of the Fermi level, and thus determines the type and height of the Schottky barrier. These conclusions provide rational evidence for the asymmetric doping concepts to design and fabricate MoS2-based field effect transistors. [ABSTRACT FROM AUTHOR]

The manipulation of the constituents of novel hetero-photocatalysts is an effective method for improving photocatalytic efficiency, but a theoretical understanding of the relationship between interlayer interaction and photocatalytic activity is still lacking. Herein, the interfacial interactions and electronic properties of MoS2/graphene oxide (GO) heterojunctions with various O concentrations were explored systematically by first-principles calculations. The results indicate that MoS2 and GO can form a stable van der Waals heterojunction, and enhance the built-in internal electric field from GO to the MoS2 surface with the increase in O concentration after interfacial equilibrium. It is inferred that the photogenerated electrons and holes naturally accumulate in the conduction band of GO and the valence band of MoS2, respectively, under the built-in internal electric field driving, indicating the formation of direct Z-scheme heterojunctions. In addition, a red shift of the light absorption edge and the shift up of the conduction band edge of MoS2/GO heterojunctions are observed with an increase in O concentration. It can be concluded that the O atom plays a crucial role in the energy band alignment of MoS2/GO heterojunctions for the improvement of photocatalytic performance. These results are beneficial to understand and design layered MoS2/GO photocatalytic systems or as cocatalysts with other semiconductors. [ABSTRACT FROM AUTHOR]

Aqueous Mn-ion batteries (MIBs) exhibit a promising development potential due to their cost-effectiveness, high safety, and potential for high energy density. However, the development of MIBs is hindered by the lack of electrode materials capable of storing Mn 2+ ions due to acidic manganese salt electrolytes and large ion radius. Herein, the tunnel-type structure of monoclinic VO 2 nanorods to effectively store Mn 2+ ions via a reversible (de)insertion chemistry for the first time is reported. Utilizing exhaustive in situ/ex situ multi-scale characterization techniques and theoretical calculations, the co-insertion process of Mn 2+ /proton is revealed, elucidating the capacity decay mechanism wherein high proton activity leads to irreversible dissolution loss of vanadium species. Further, the Grotthuss transfer mechanism of protons is broken via a hydrogen bond reconstruction strategy while achieving the modulation of the electric double-layer structure, which effectively suppresses the electrode interface proton activity. Consequently, the VO 2 demonstrates excellent electrochemical performance at both ambient temperatures and -20 °C, especially maintaining a high capacity of 162 mAh g -1 at 5 A g -1 after a record-breaking 20 000 cycles. Notably, the all-vanadium symmetric pouch cells are successfully assembled for the first time based on the "rocking-chair" Mn 2+ /proton hybrid mechanism, demonstrating the practical application potential., (© 2024 Wiley‐VCH GmbH.)

Calcium ion batteries (CIBs) are a promising energy storage device due to the low redox potential of the Ca metal and the abundant reserves of the Ca element. However, the large radius and divalent nature of Ca 2+ lead to its slow ion diffusion kinetics and the lack of suitable electrode materials for Ca storage. Here, a layered structure of Na 2 Ti 3 O 7 (NTO) is presented as an anode material for nonaqueous CIBs. This NTO anode demonstrates a high discharge capacity of 165 mA h g -1 at 100 mA g -1 and a remarkable capacity retention rate of 80%, even after 2000 cycles at 500 mA g -1 , surpassing the performance of all reported intercalation-type anode materials for CIBs. The NTO transfers to layered Ca VII Na IX Ti 3 O 7 (CNTO) with intercalation of Ca 2+ and extraction of Na + during the first discharge process. Then, the CNTO undergoes the reversible insertion/extraction of Ca 2+ during subsequent cycling. Additionally, density functional theory calculations reveal that NTO possesses a rapid two-dimensional diffusion pathway for Ca 2+ . Moreover, the full CIBs based on NTO as the anode further underscore its potential for CIBs. This work presents promising anode materials for CIBs, offering opportunities to promote the development of high-performance CIBs.

Zinc powder (Zn-P) anodes have significant advantages in terms of universality and machinability compared with Zn foil anodes. However, their rough surface, which has a high surface area, intensifies the uncontrollable growth of Zn dendrites and parasitic side reactions. In this study, an anti-corrosive Zn-P-based anode with a functional layer formed from a MXene and Cu-THBQ (MXene/Cu-THBQ) heterostructure is successfully fabricated via microfluidic-assisted 3D printing. The unusual anti-corrosive and strong adsorption of Zn ions using the MXene/Cu-THBQ functional layer can effectively homogenize the Zn ion flux and inhibit the hydrogen evolution reaction (HER) during the repeated process of Zn plating/stripping, thus achieving stable Zn cycling. Consequently, a symmetric cell based on Zn-P with the MXene/Cu-THBQ anode exhibits a highly reversible cycling of 1800 h at 2 mA cm -2 /1 mAh cm -2 . Furthermore, a Zn-organic full battery matched with a 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl organic cathode riveted on graphene delivers a high reversible capacity and maintains a long cycle life., (© 2023 Wiley-VCH GmbH.)

The corrosion, parasitic reactions, and aggravated dendrite growth severely restrict development of aqueous Zn metal batteries. Here, we report a novel strategy to break the hydrogen bond network between water molecules and construct the Zn(TFSI) 2 -sulfolane-H 2 O deep eutectic solvents. This strategy cuts off the transfer of protons/hydroxides and inhibits the activity of H 2 O, as reflected in a much lower freezing point (<-80 °C), a significantly larger electrochemical stable window (>3 V), and suppressed evaporative water from electrolytes. Stable Zn plating/stripping for over 9600 h was obtained. Based on experimental characterizations and theoretical simulations, it has been proved that sulfolane can effectively regulate solvation shell and simultaneously build the multifunctional Zn-electrolyte interface. Moreover, the multi-layer homemade modular cell and 1.32 Ah pouch cell further confirm its prospect for practical application., (© 2022 Wiley-VCH GmbH.)

An understanding of the high photocatalytic performance reported for MoS2/BiOI nanocomposite is far from satisfactory. Here, the interfacial interaction and electronic properties of a MoS2/BiOI heterostructure were investigated systematically for the first time by first-principle calculations incorporating a semi-empirical dispersion-correction scheme. Our results confirm the reasonable existence of van der Waals interactions and a favorable Z-scheme mechanism, based on the typical interfacial cohesive energy and the energy level lineup at the interface. Analyzing the charge density differences and work functions, the built-in electric field is formed along the direction from MoS2 to BiOI after the interface equilibrium, and facilitates the separation of photoinduced electron-hole pairs in the interface. Additionally, it can be inferred that the incorporation of MoS2 into BiOI increases the carrier mobility and improves light harvesting, in agreement with the previously reported experimental data. Our work provides an insight into the mechanism of the enhanced visible-light photocatalytic activity of a MoS2/BiOI heterostructure, and helps to design other new heterostructure combinations.

Magnetic BiOBr/Fe 3 O 4 /RGO composites with remarkable photocatalytic capability were prepared by a simple hydrothermal method to load 3D flower-like microspherical BiOBr onto the surface of Fe 3 O 4 /RGO. Under visible-light irradiation ( λ > 420 nm), the BiOBr/Fe 3 O 4 /RGO composite with 56% mass percentage of Fe 3 O 4 /RGO shows the optimal removal ability for Rhodamine B, and the total removal efficiency is 96%. The coupling of Fe 3 O 4 /RGO and BiOBr elevates the conduction band of BiOBr, which enhances the reduction level of BiOBr/Fe 3 O 4 /RGO composites. Ultimately, based on experiments and theoretical calculations, an n-type Schottky contact formed at the heterojunction interface between RGO doped with Fe 3 O 4 and BiOBr is proposed for photoexcited charge transfer. The RGO with great adsorptivity plays a major role in the photocatalysts composed of BiOBr, RGO and Fe 3 O 4 . Further, BiOBr/Fe 3 O 4 /RGO composites with permanent-magnetism can be recovered and reused easily by external magnetic field and maintain a total removal efficiency of 90% after four cycles., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Maximizing the activity of materials towards the alkaline hydrogen evolution reaction while maintaining their structural stability under realistic working conditions remains an area of active research. Herein, we report the first controllable surface modification of graphene(G)/V 8 C 7 heterostructures by nitrogen. Because the introduced N atoms couple electronically with V atoms, the V sites can reduce the energy barrier for water adsorption and dissociation. Investigation of the multi-regional synergistic catalysis on N-modified G/V 8 C 7 by experimental observations and density-functional-theory calculations reveals that the increase of electron density on the epitaxial graphene enable it to become favorable for H* adsorption and the subsequent reaction with another H 2 O molecule. This work extends the range of surface-engineering approaches to optimize the intrinsic properties of materials and could be generalized to the surface modification of other transition-metal carbides., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The manipulation of the constituents of novel hetero-photocatalysts is an effective method for improving photocatalytic efficiency, but a theoretical understanding of the relationship between interlayer interaction and photocatalytic activity is still lacking. Herein, the interfacial interactions and electronic properties of MoS 2 /graphene oxide (GO) heterojunctions with various O concentrations were explored systematically by first-principles calculations. The results indicate that MoS 2 and GO can form a stable van der Waals heterojunction, and enhance the built-in internal electric field from GO to the MoS 2 surface with the increase in O concentration after interfacial equilibrium. It is inferred that the photogenerated electrons and holes naturally accumulate in the conduction band of GO and the valence band of MoS 2 , respectively, under the built-in internal electric field driving, indicating the formation of direct Z-scheme heterojunctions. In addition, a red shift of the light absorption edge and the shift up of the conduction band edge of MoS 2 /GO heterojunctions are observed with an increase in O concentration. It can be concluded that the O atom plays a crucial role in the energy band alignment of MoS 2 /GO heterojunctions for the improvement of photocatalytic performance. These results are beneficial to understand and design layered MoS 2 /GO photocatalytic systems or as cocatalysts with other semiconductors.