Search

Unidirectional magnetic anisotropy induced by exchange bias (EB) between ferromagnetic and antiferromagnetic layers is of paramount importance in various spintronic devices. Traditional setting and optimization of EB involve cooling through the Néel temperature of the antiferromagnets under biasing field in vacuum furnace which takes hours of time and cannot realize localized control of EB. Herein, an alternative process to configure EB by injection of microsecond current impulse for locally heating of the heterostructure is reported. 180‐degree exchange bias switching has been realized in both anisotropic magnetoresistance and giant magnetoresistance units, resulting in tunable magnetic field sensing functionalities. This mechanism for pinpoint control of EB provides more freedom for the design and optimization of various sensing and logic spintronics. [ABSTRACT FROM AUTHOR]

The micro-discharge effect is a failure mechanism that often appeared in space microwave devices under vacuum conditions, such as RF (radio frequency) cavity, RF satellite missile, and antenna launching communication system. How to control micro-discharge effectively and simply has become a research hotspot. In this paper, we have prepared a series of doping silver (Ag)/carbon (C) composite films by double target magnetron sputtering technology and have significantly reduced the maximum secondary electron emission coefficient (δmax) from 2.522 to 1.04 when the doping ratio of Ag/C is 1.345. Theoretically, the continuous increase of sp2 hybrid bond content tuned by the existing Ag nanoparticles has a greater contribution to the conductivity and inhibition of secondary electron emission in the Ag/C composite films. Meanwhile, the gradually emerged "multi-trap" surface structure with the increase of Ag doping content has further increased the collision between excited secondary electrons and free electrons, achieving an obvious inhibition effect. The results demonstrate that secondary electron emission can be suppressed effectively by tuning the structural feature of two kinds of compounded materials with low δmax. It is of great significance in physical mechanism analysis and design of the new doping process. [ABSTRACT FROM AUTHOR]

The electron‐phonon interaction is known as one of the major mechanisms determining electrical and thermal properties. In particular, it alters the carrier transport behaviors and sets fundamental limits to carrier mobility. Establishing how electrons interact with phonons and the resulting impact on the carrier transport property is significant for the development of high‐efficiency electronic devices. Here, carrier transport behavior mediated by the electron‐phonon coupling in BiFeO3 epitaxial thin films is directly observed. Acoustic phonons are generated by the inverse piezoelectric effect and coupled with photocarriers. Via the electron‐phonon coupling, doughnut shape carrier distribution has been observed due to the coupling between hot carriers and phonons. The hot carrier quasi‐ballistic transport length can reach 340 nm within 1 ps. The results suggest an effective approach to investigating the effects of electron‐phonon interactions with temporal and spatial resolutions, which is of great importance for designing and improving electronic devices. [ABSTRACT FROM AUTHOR]

Memristors are of great significance for the construction of memory devices and neuromorphological computing, which need a fast response time for ultrahigh data storage, ultrafast information processing, and efficient neuromorphic computing. Currently, memristors based on perovskite oxide materials generally have a long response time. In this paper, the electroforming‐free memristive behavior based on Ar+ irradiating induced oxygen vacancy modulation in SrTiO3 (STO) has been investigated. The Ag/STO/(Ta/Pt) device shows a stable bipolar resistive switching (RS) characteristic and can realize ultrafast multi‐resistance switching behavior. More importantly, its conductance can be continuously controlled with short pulse on the nanosecond scale to simulate potentiation and depression of synapse, promising potential application in ultra‐fast biological synapse and high‐efficiency training of neural networks. More importantly, the defect engineering strategy used in this work provides more freedom for the design and optimization of versatile memristor devices. [ABSTRACT FROM AUTHOR]

Nano-FeS has great potential for use in the management of radioactive contaminants. In this paper, we prepared a FeS@Stenotrophomonas sp. composite material by ultrasonic chemistry, and it showed excellent removal of uranium and thorium from the solution. Through optimization of the experimental conditions, it was found that the maximum adsorption capacities for uranium and thorium reached 481.9 and 407.5 mg/g for a composite made with a synthetic ratio of 1:1, pH 5 and 3.5, respectively, for U and Th, and sonication for 20 min. Compared with those of FeS or Stenotrophomonas alone, the removal capacity was greatly improved. The results of a mechanistic study indicated that efficient removal of the uranium and thorium was due to ion exchange, reduction, and microbial surface adsorption. FeS@Stenotrophomonas sp. could be applied to U(VI) and Th(IV) extraction for radioactive water. [ABSTRACT FROM AUTHOR]

Measurement of 3D vector magnetic field is of vital importance for the development of magnetic navigation, biomedical diagnosis, and microimaging. Traditional 3D magnetic sensors require cooperation of multiple sensors on three orthogonal planes, resulting in disadvantages of bulky size and low spatial resolution. Recently proposed spin orbit torque sensor based on ferromagnetic/heavy‐metal heterostructures can detect three magnetic field components individually due to the different symmetries of current‐polarity‐dependent magnetization dynamic. However, the large driving current density and complex driving procedure hinder their practical application, especially in AC magnetic field detection. Herein, 3D magnetic sensors with dramatically reduced driving current density are reported, one fifth of the original value, by exquisite engineering of the magnetic anisotropy in Pt/Co/Ta heterostructures. With further reduced perpendicular magnetic anisotropy, the sensor in the easy‐cone state demonstrates a record‐high sensitivity of 31196 V A−1 T−1. More importantly, the easy‐cone state sensor can work with an ultralow driving current density of 3.8 kA cm−2, which is three orders lower than previous results. Although easy‐cone state sensor can only measure the z‐axis field, highly compact 3D magnetic sensor can be realized by adoption of two anisotropic magnetoresistance sensors, promising great potential application in space‐ and energy‐restricted scenarios. [ABSTRACT FROM AUTHOR]

Considering the effect of different moulding processes, this paper studies the curing deformation of laminated composites of stiffened panel structures. The curing deformation is assessed after the stiffened panel structures of carbon fiber/epoxy resin composites are created through vacuum bag pressing process by co-curing, co-bonding, and secondary bonding and curing. For different moulding processes, by using an instantaneous linear elastic curing constitutive model and taking residual curing stresses as pre-stress, a finite element simulation method considering different curing methods is proposed, and is also compared and verified with the experimental results. The influences of factors such as moulding processes, layup methods and stiffener thickness on the curing deformation of the stiffened panel structures are analyzed. The results show that moulding processes, layup and stiffener thickness have a great influence on the curing deformation of the structures. The deformation of composite stiffened panel structures decreases considerably by increasing stiffener thickness and adopting an appropriate moulding process through a reasonable layup. [ABSTRACT FROM AUTHOR]