Search

This paper develops two alternative approaches for downscaling passive microwave-derived soil moisture. Ground and airborne data collected over the Walnut Gulch experimental watershed during the Monsoon'90 experiment were used to test these approaches. These data consisted of eight micrometeorological stations (METFLUX) and six flights of the L-band Push Broom Microwave Radiometer (PBMR). For each PBMR flight, the 180-m resolution L-band pixels covering the eight METFLUX sites were first aggregated to generate a 500-m 'coarse-scale' passive microwave pixel. The coarse-scale-derived soil moisture was then downscaled to the 180-m resolution using two different surface soil moisture indexes (SMIs): 1) the evaporative fraction (EF), which is the ratio of the evapotranspiration to the total energy available at the surface; and 2) the actual EF (AEF), which is defined as the ratio of the actual-to-potential evapotranspiration. It is well known that both SMIs depend on the surface soil moisture. However, they are also influenced by other factors such as vegetation cover, soil type, root-zone soil moisture, and atmospheric conditions. In order to decouple the influence of soil moisture from the other factors, a land surface model was used to account for the heterogeneity of vegetation cover, soil type, and atmospheric conditions. The overall accuracy in the downscaled values was evaluated to 3% (vol.) for EF and 2% (vol.) for AEF under cloud-free conditions. These results illustrate the potential use of satellite-based estimates of instantaneous evapotranspiration on clear-sky days for downscaling the coarse-resolution passive microwave soil moisture. Index Terms--Downscaling, evaporative fraction (EF), evapotranspiration, passive microwave, surface soil moisture.

In this paper, the L-band Microwave Emission of the Biosphere (L-MEB) model used in the Soil Moisture and Ocean Salinity (SMOS) Level 2 Soil Moisture algorithm is calibrated using L-band (1.4 GHz) microwave measurements over a coniferous (Pine) and a deciduous (mixed/Beech) forest. This resulted in working values of the main canopy parameters optical depth ([tau]), single scattering albedo ([omega]), and structural parameters tt (H) and tt (V), besides the soil roughness parameters [H.sub.R] and [N.sub.R]. Using these calibrated values in the forward model resulted in a root mean-square error in brightness temperatures from 2.8 to 3.8 K, depending on data set and polarization. Furthermore, the relationship between canopy optical depth and leaf area index is investigated for the deciduous site. Finally, a sensitivity study is conducted for the focus parameters, temperature, soil moisture, and precipitation. The results found in this paper will be integrated in the operational SMOS Level 2 Soil Moisture algorithm and used in future inversions of the L-MEB model, for soil moisture retrievals over heterogeneous, partly forested areas. Index Terms--Forest, L-band, microwave radiometry, soil moisture, Soil Moisture and Ocean Salinity (SMOS).

The Soil Moisture and Ocean Salinity (SMOS) mission is a joint ESA-CNES (F)-CDTI (E) mission within the ESA Living Planet Program, and it was the second ESA Earth Explorer Opportunity Mission to be selected. The mission objectives of SMOS are to provide soil moisture and ocean salinity observations for weather forecasting, climate monitoring, and the global freshwater cycle. This paper will describe the scientific campaigns performed to date, as well as the plans for the on-orbit calibration and validation activities. Index Terms--Calibration, moisture measurement, radiometry, remote sensing, sea surface, sea surface salinity (SSS), soil, soil moisture (SM), Soil Moisture and Ocean Salinity (SMOS), validation, vicarious.

Soil moisture retrieval models from the Soil Moisture and Ocean Salinity (SMOS) mission, which is an L-band microwave interferometer, are based on multiangular measurements and make use of the emissivity angular signature. Mountainous areas modify local incidence angles, implying significant impacts on brightness temperatures and, consequently, on soil moisture retrievals. The purpose of this paper is to establish a criterion in quantifying the relevance of topographic impacts at the SMOS scale (~40 km). The goal is thus to define a method of flagging the pixels according to the relative impact of topography on the brightness temperature. The proposed method uses the variogram of digital elevation model images. As a result, a map of the pixels to be flagged is produced to ensure that no soil moisture retrievals are carried out on pixels that are affected by strong topographic effects. As validation, a model was also used to simulate differences between brightness temperature variations between mountainous areas and flat surfaces. Index Terms--L-band, passive microwave, Soil Moisture and Ocean Salinity (SMOS), topography impacts.

Soil Moisture and Ocean Salinity (SMOS) is an Earth observation mission developed by the European Space Agency in cooperation with the Centre National d'Etudes Spatiales, France and the Centre for the Development of Industrial Technology, Spain, whose main objective is to provide global maps of soil moisture over land and sea surface salinity over oceans. This paper describes the SMOS mission in terms of the mission objectives and associated key system requirements, the conceptual implementation of the mission and corresponding system architecture, major building blocks and associated functions, the SMOS selected polar orbit and characteristics, and SMOS satellite attitude modes for the different phases of the mission and for the calibration of the Microwave Imaging Radiometer with Aperture Synthesis instrument. Index Terms--Earth observation, mission requirements, ocean salinity, polar orbit, soil moisture, system architecture.

In this paper, microwave remote sensing, together with in situ moisture probes, is used to investigate temperature effects on the soil dielectric constant. Field and specific laboratory measurements were performed for different soil water content over a wide range of temperatures. The experimental results lead to the following evidences: 1) temperature effect is different for bound and free waters in soil; 2) bound-water relaxation frequency falls within the range of frequencies that are used by impedance soil moisture probes for field measurements; and 3) the increase of bound-water relaxation frequency with soil temperature interferes in a significant way with moisture measurements when bound-water fraction is important. These results have implications in field experimentation since most moisture sensors operate under 500 MHz and are affected by this phenomena of relaxation. Index Terms--Dielectric measurements, frequency, moisture measurements, remote sensing, Soil Moisture and Ocean Salinity Mission (SMOS), temperature.

A simple reflectivity model of a bare soil at L-band is developed to account for the effects of soil roughness at different angles and polarizations. This model was developed using a long-term dataset acquired over the bare soil in the framework of the Surface Monitoring Of the Soil Reservoir EXperiment (SMOSREX). It is shown that the roughness effects are different depending on the measurement configuration, in terms of incidence angle and polarization. However, in this paper, a simple parameterization that is based on a single roughness parameter was calibrated in order to account for this angular and polarization dependencies. This parameter was found to be dependent on soil moisture: drier conditions were associated to higher 'roughness' conditions. The root-mean-square error between the measured and modeled reflectivities on days when no precipitation events were detected at vertical polarization (V-pol) is 0.0275, and at horizontal polarization (H-pol), the rmse is 0.0237; all incidence angles were considered. When aH data are considered, the rmsd for V-pol is 0.0350, and for H-pol, the rmse is 0.0373. This new simple model is suitable for soil moisture retrieval from Soil Moisture and Ocean Salinity data. By means of this simple parameterization, almost two years of soil moisture data were retrieved with a good accuracy. The SMOSREX dataset allowed to ensure a long-term suitability of the proposed parameterization. Index Terms--Bare soil, emissivity, L-band radiometry, soil moisture, surface roughness.

In the framework of the Soil Moisture and Ocean Salinity mission, a two-year (1987-1988) global simulation of brightness temperatures (TB) at L-band was performed using a simple model [L-band microwave emission of the biosphere, (L-MEB)] based on radiative transfer equations. However, the lack of alternative L-band spaceborne measurements corresponding to real-world data prevented from assessing the realism of the simulated global-scale TB fields. In this study, using a similar modeling approach, TB simulations were performed at C-band and X-band. These simulations required the development of C-MEB and X-MEB models, corresponding to the equivalent of L-MEB at C-band and X-band, respectively. These simulations were compared with Scanning Multichannel Microwave Radiometer (SMMR) measurements during the period January to August 1987 (corresponding to the end of life of the SMMR mission). A sensitivity study was also carried out to assess, at a global scale, the relative contributions of the main MEB parameters (particularly the roughness and vegetation model parameters). Regional differences between simulated and measured TBs were analyzed, discriminating possible issues either linked to the radiative transfer model (C-MEB and X-MEB) or due to land surface simulations. A global agreement between observations and simulations was discussed and allowed to evaluate regions where soil moisture retrievals would give best results. This comparison step made at C-band and X-band allowed to better assess how realistic and/or accurate the L-band simulations could be. Index Terms--Global scale, L-, C-, X-band radiometry, simple emission model, Scanning Multichannel Microwave Radiometer (SMMR), Soil Moisture and Ocean Salinity (SMOS), soil moisture.

A new physically based disaggregation method is developed to improve the spatial resolution of the surface soil moisture extracted from the Soil Moisture and Ocean Salinity (SMOS) data. The approach combines the 40-km resolution SMOS multiangular brightness temperatures and 1-km resolution auxiliary data composed of visible, near-infrared, and thermal infrared remote sensing data and all the surface variables involved in the modeling of land surface-atmosphere interaction available at this scale (soil texture, atmospheric forcing, etc.). The method successively estimates a relative spatial distribution of soil moisture with fine-scale auxiliary data, and normalizes this distribution at SMOS resolution with SMOS data. The main assumption relies on the relationship between the radiometric soil temperature inverted from the thermal infrared and the microwave soil moisture. Based on synthetic data generated with a land surface model, it is shown that the radiometric soil temperature can be used as a tracer of the spatial variability of the 0-5 cm soil moisture. A sensitivity analysis shows that the algorithm remains stable for big uncertainties in auxiliary data and that the uncertainty in SMOS observation seems to be the limiting factor. Finally, a simple application to the SGP97/AVHRR data illustrates the usefulness of the approach. Index Terms--Disaggregation, multispectral remote sensing, Soil Moisture and Ocean Salinity (SMOS) mission, surface soil moisture, synergy.

The spectral window at L-band (1.413 GHz) is important for passive remote sensing of surface parameters such as soil moisture and sea surface salinity that are needed to understand the hydrological cycle and ocean circulation. Radiation from celestial sources (mostly galactic) is strong in this window, and an accurate accounting of this background radiation is often needed for calibration. This paper presents a comparison of the background radiation predicted by a model developed from modern radio astronomy measurements with measurements made with several modern L-band remote sensing radiometers. The comparison validates the model and illustrates the magnitude of the correction necessary in remote sensing applications. Index Terms--Galactic background, microwave radiometry, remote sensing.