Search

We present an approximate description of the behavior of an elastic-plastic material processed by a cylindrically or spherically symmetric converging shock, following Whitham's shock dynamics theory. Originally applied with success to various gas dynamics problems, this theory is presently derived for solid media, in both elastic and plastic regimes. The exact solutions of the shock dynamics equations obtained reproduce well the results obtained by high-resolution numerical simulations. The examined constitutive laws share a compressible neo-Hookean structure for the internal energy e=e(s)(I(1))+e(h)(ρ,ς), where e(s) accounts for shear through the first invariant of the Cauchy-Green tensor, and e(h) represents the hydrostatic contribution as a function of the density ρ and entropy ς. In the strong-shock limit, reached as the shock approaches the axis or origin r=0, we show that compression effects are dominant over shear deformations. For an isothermal constitutive law, i.e., e(h)=e(h)(ρ), with a power-law dependence e(h) is proportional to ρ(α), shock dynamics predicts that for a converging shock located at r=R(t) at time t, the Mach number increases as M is proportional to [log(1/R)](α), independently of the space index s, where s=2 in cylindrical geometry and 3 in spherical geometry. An alternative isothermal constitutive law with p(ρ) of the arctanh type, which enforces a finite density in the strong-shock limit, leads to M is proportional to R(-(s-1)) for strong shocks. A nonisothermal constitutive law, whose hydrostatic part e(h) is that of an ideal gas, is also tested, recovering the strong-shock limit M is proportional to R(-(s-1)/n(γ)) originally derived by Whitham for perfect gases, where γ is inherently related to the maximum compression ratio that the material can reach, (γ+1)/(γ-1). From these strong-shock limits, we also estimate analytically the density, radial velocity, pressure, and sound speed immediately behind the shock. While the hydrostatic part of the energy essentially commands the strong-shock behavior, the shear modulus and yield stress modify the compression ratio and velocity of the shock far from the axis or origin. A characterization of the elastic-plastic transition in converging shocks, which involves an elastic precursor and a plastic compression region, is finally exposed.

Purpose: The objective of this study was to perform an in vitro evaluation of the antibacterial properties of 6 endodontic sealers (Endomethasone C, Argoseal, Bioseal Normal, Acroseal, AH Plus, Sicura Seal)., Methods: The agar diffusion test (well and paper disc methods) with Enterococcus faecalis, Staphylococcus aureus and Streptococcus mutans was used. For the well method, Petri dishes were inoculated with bacterial suspensions. Each well was completely filled with freshly mixed endodontic sealer. For the paper disc method, sterile paper discs were immersed in freshly mixed sealers and put on agar plates. Diameters of halos formed around the sealers were measured after 24 h and 48 h., Statistical Analysis: The effects of well method and of paper disc method were analyzed by 1-way ANOVA., Results: Endomethasone C, Argoseal and Bioseal showed the largest inhibition halos for all the tested microorganisms, while Sicura Seal and AH Plus showed low antibacterial effects. Moreover, the comparison of well method and paper disc methods showed significant statistical differences (P<0,01) for all sealers and indicated a dose-dependent antimicrobial effect.

Objective: the effectiveness of seals obtained after cementation of fiber posts into root canals is still unclear. The aim of this in vitro study was to evaluate the influence of ethanol treatment on the bond between root canal surfaces and fiber posts., Method and Materials: forty sound extracted teeth were selected for this study. The specimens were endodontically treated, and a post space was prepared. In half of the teeth, the post space was etched and bonded (group 1); in the other half, it was etched, dried with ethanol, and bonded with the same adhesive system (group 2). A fiber post was placed in each root using the same adhesive and restorative protocol. Restored samples were perpendicularly sectioned at the coronal, middle, and apical third and prepared for SEM observation to evaluate the interfaces among root dentin, resin cement, and fiber posts, as well as the characteristics of the resulting hybrid layer., Results: SEM examination of interfaces among root dentin, resin cement, and fiber posts showed differences in adhesive interfaces between the groups. No significant differences (P > .05) were found at the cement-post interface. At the dentin-cement interface, group 1 showed significantly lower scores (P < .05) than group 2. In both groups, the cement-post interface showed significantly (P < .05) lower gap scores than the dentin-cement interface., Conclusion: ethanol drying does not seem to be effective in improving the adhesion of fiber posts into root canals.

Objectives: The aim of the present in vitro study was the evaluation of two toothpastes (Sensodyne Pronamel and Biorepair Plus on repairing enamel erosion produced by a soft drink (Coca Cola), using Atomic Force Microscopy (AFM)., Methods: Fifty extracted human central incisors free of caries were selected and divided in a treatment and a control half; they were kept in artificial saliva during whole experimentation. The treatment halves were divided into five groups; group 1: demineralization with soft drink; group 2: demineralization with soft drink + Pronamel; group 3: demineralization with soft drink + Biorepair Plus; group 4: intact enamel + Pronamel; group 5: intact enamel + Biorepair Plus. Specimen demineralization was carried on in 4 intervals of 2 min. In groups 2, 3, 4, and 5 the toothpastes were applied for 3 min at 0, 8, 24 and 36 h. The surface of each specimen was imaged by AFM and R(rms), root-mean-square roughness, and Maximum Depth of the cavities were registered., Results: Amongst treatment specimens of groups 1, 2, and 3 a statistically significant difference (P<0.01) in R(rms) and Maximum Depth values was registered: the toothpastes reduced enamel demineralization. No statistical differences in R(rms) values were registered between the two toothpastes., Conclusions: The toothpastes tested (Pronamel and BioRepair Plus) offer a degree of protection from erosive drinks., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

We present the structure of an open microwell, i.e. a microwell open at both the top and bottom ends, which enables single-cells to be handled, processed and recovered after the experiment. The microwell has a novel architecture which allows particles to be trapped and forced to interact by means of a cylindrical negative dielectrophoretic cage. Particles are aligned along a horizontal axis where the electric field minimum is placed. Arrays of open microwells are fabricated using flexible printed circuit board (PCB) technology providing cheap and disposable devices. Levitation and precise positioning of both polystyrene beads and K562 cells were experimented, confirming the results of physical simulations. Assessment of cell viability after 20 min exposure to the electric field was performed through a standard calcein-release assay.

Objectives: The aim of the present in vitro study was the evaluation of a CPP-ACP paste (Tooth Mousse) on preventing dental erosion produced by a soft drink (Coca Cola), using Atomic Force Microscopy (AFM)., Methods: Thirty extracted human central incisors free of caries were selected and divided in a treatment and a control half. The treatment halves were divided in three groups-group 1: demineralization with soft drink (4 intervals of 2 min); group 2: demineralization with soft drink (4 intervals of 2 min) plus Tooth Mousse; group 3: intact enamel plus Tooth Mousse. In groups 2 and 3 Tooth Mousse was applied for 3 min at 0, 8, 24 and 36 h. The surface of each specimen was imaged by AFM and R(rms) values were registered., Results: Among treatment specimens of groups 1 and 2, a statistically significant difference (P<0.01) in R(rms) values was registered: treatment of the specimens with CPP-ACP paste had a protective effect on enamel demineralization. In group 3 no statistically significant difference was registered between exposed and not exposed halves of the specimens., Conclusions: The use of a CPP-ACP paste had a protective effect on enamel demineralization in an in vitro model.

In this work we present a novel concept of active microwells based on cylindrical wells able to vertically trap and control single particles by means of negative dielectrophoresis. The device is fabricated by drilling through holes on a polyimide substrate with copper-gold or aluminum metals, forming three annular electrodes within the well. A channel under the device provides a fluid flow filling the microwell by capillarity. Particles are delivered from the top by a microdispenser and applying sinusoidal signals to the electrodes at frequencies ranging from 100kHz to 1.5MHz and amplitudes between 2V and 7V they are successfully trapped and levitated at the level of the central electrode in the middle of microwells with a diameter of 125mum. By changing signal phases, other configurations are also enabled to load particles in the well or eject them from the bottom. The extension to an array of microwells is presented and design rules are described for routing electrode connections and setting signal parameters. K562 cells cultured with Ara-C 1000nM were successfully trapped and controlled in physiological media. Polystyrene beads were also levitated in water and were used for experimental measurements on minimum amplitudes and phase differences in the signals required to levitate beads, confirming the results obtained by simulation.

This study tested solubility of 3 root-end filling materials (IRM, Pro Root, and Superseal) and an endodontic sealer (Argoseal) used as positive control. The test was performed according to the International Standards Organization 6876 standard and the American Dental Association specification #30. Six specimens of each material were prepared and immersed in water. Solubility was determined after 24 hours and 2 months and analyzed statistically with a one-way analysis of variance test. All retrograde filling materials were of low solubility. Under the conditions of the present study, IRM, Superseal, and Pro Root are virtually insoluble; this is an adequate physical property for use as root-end filling materials.