Search

• Variational mode decomposition is coupled with optimization for image segmentation. • This algorithm is compared with non-VMD based approach. • Kapur's and Tsallis entropy are used to find threshold value for image segmentation. • VMD is a newly developed decomposition technique. • The VMD-based approach is found to be more accurate against non-VMD based approach. Multilevel thresholding using the histogram is the most popular and accepted technique of image segmentation. The computational time of multilevel thresholding rises exponentially as the number of the thresholds increases. Histogram suffers from irregularities and sharp details which leads to stagnation. In this article, a newly developed multiverse optimization is combined with variational mode decomposition to overcome this problem. The histogram of an input image divided into several band-limit modes using VMD then reconstruct histogram using meaningful modes. The reconstructed histogram is free from the high-frequency fluctuation which causes local optima. The proposed method utilized two entropy function to develop image segmentation by determining the optimal threshold. The result of the proposed algorithm is analyzed with other evolutionary algorithms such as artificial bee colony, sine cosine algorithm, and salp swarm algorithm. Comparison is made based on comparative parameters such as peak signal to noise ratio, structural similarity index, feature similarity index, uniformity, normalized absolute error, quality index based on local variance, computational time, and mean square error. The test results validate that the proposed algorithm presents more reliable results than other existing techniques. [ABSTRACT FROM AUTHOR]

The concept of complexity has become pivotal in multiple disciplines, including quantum information, where it serves as an alternative metric for gauging the chaotic evolution of a quantum state. This paper focuses on Krylov complexity, a specialized form of quantum complexity that offers an unambiguous and intrinsically meaningful assessment of the spread of a quantum state over all possible orthogonal bases. This study is situated in the context of Gaussian quantum states, which are fundamental to both Bosonic and Fermionic systems and can be fully described by a covariance matrix. While the covariance matrix is essential, it is insufficient alone for calculating Krylov complexity due to its lack of relative phase information is shown. The relative covariance matrix can provide an upper bound for Krylov complexity for Gaussian quantum states is suggested. The implications of Krylov complexity for theories proposing complexity as a candidate for holographic duality by computing Krylov complexity for the thermofield double States (TFD) and Dirac field are also explored. [ABSTRACT FROM AUTHOR]

Classical automata, fuzzy automata, and rough automata with input alphabets as numbers or symbols are formal computing models with values. Fuzzy automata and rough automata are computation models with uncertain or imprecise information about the next state and can only process the string of input symbols or numbers. To process words and propositions involved in natural languages, we need a computation model to model real-world problems by capturing the uncertainties involved in a word. In this paper, we have shown that computing with word methodology deals with perceptions rather than measurements and allows the use of words in place of numbers and symbols while describing the real-world problems together with interval type-2 (IT2) fuzzy sets which have the capacity to capture uncertainties involved in word using its footprint of uncertainty. The rough set theory, which has potential of modeling vagueness in the imprecise and ill-defined environment, introduces a computation model, namely, IT2 fuzzy rough finite automata, which is efficient to process uncertainties involved in words. Further, we have shown the application of introduced IT2 fuzzy finite rough automaton in the medical diagnosis of COVID-19 patients. [ABSTRACT FROM AUTHOR]

This work applies the bicategory-theoretic concepts in formation of minimal fuzzy realization for a given fuzzy behavior. The concept of derivative of fuzzy behavior is used for such construction. [ABSTRACT FROM AUTHOR]

A review of studies focused on promoting the rate of heat transfer with the help of an optimum rise in friction factor, by offering a simulated irregularity to the interior surface of the absorber plate of SAH, is expressed. In this article an effort has been made to explore different coarseness configurations as used by number of researchers to boost the SAH heat transfer rate. Furthermore, different correlations developed by researchers for Nusselt number and friction factor are also presented. On the basis of these correlations, thermohydraulic performance variable was calculated and attributed for various coarseness configurations. Friction factor and Colburn factor of various coarseness configurations have also been compared and presented. This review focused on use of different coarseness configurations with different coarseness parameter and flow parameter is deeply discussed from which future researchers can easily identify that which coarseness is to be used for designing SAH duct for the better augmentation of heat transfer and friction factor. It also helps the researchers to determine the optimum value of coarseness parameter so that the SAH works efficiently and effectively. [ABSTRACT FROM AUTHOR]

To characterize inventions and assess trends in brachytherapy innovation based on brachytherapy-related patents awarded across the past 2 decades and provide insights that will help inform future research and entrepreneurship in the field. The United States Patent and Trademark Office database was searched for patents awarded between 1999 and 2018 with a classification code corresponding to the broadest brachytherapy search category. Patent characteristics were stratified and compared by geographic location, affiliation, and theme of invention. There were 202 brachytherapy-related patents awarded from 2009 to 2018, which indicates a 56% increase in patent productivity and brachytherapy innovation compared with the previous decade from 1999 to 2008. Patents had an industry affiliation in 83% of cases from 1999 to 2008 and in 76% of cases from 2009 to 2018. Meanwhile, academic participation in brachytherapy patent innovation rose from 4% to 11% in that time. The focus and theme of inventions evolved across time, with radiation sources being the most common theme from 1999 to 2008 and falling to third place in 2009–2018. Conversely, development of brachytherapy-related patents involving exogenous agents such as drug-conjugates, radiosensitizers, and adjuncts to treatment increased substantially in the subsequent decade. While no collaboration was observed between academia and industry between 1999 and 2008, notable partnerships emerged in the subsequent decade which amounted to almost 5% of all patents awarded between 2009 and 2018. There has been an increase in overall brachytherapy patent production over time, and this has been accompanied by a greater variety of distinct patent themes. Collaboration between industry and academia is rare. Knowledge of brachytherapy patents may inform future research innovation in this field. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract The aim of the present research work was to formulate, optimize and evaluate the in-situ gel for the ophthalmic drug delivery using the combination of gellan gum and carbopol 934P. The Box-Behnken design was applied to optimize the concentration of gellan gum (X 1), carbopol 934P (X 2) and benzododecenium bromide (X 3) to achieve the maximum viscosity [at physiological condition; 35 °C, pH 7.4, and simulated tear fluid (STF)], mucoadhesive strength, permeability coefficient and sustained release of the drug from the gel with constraint on the viscosity under the non-physiological condition (25 °C, pH 5). Response surface plots were drawn, the statistical validity of the polynomials was established, and optimized formulation was selected by the feasibility and grid search. The design proposed the optimized batch by selecting the independent variables as gellan gum (0.55% w/v), carbopol 934P (0.35% w/v) and benzododecenium bromide (0.013% w/v) to achieve the maximum viscosity (3363 cps) at physiological condition, mucoadhesive strength (22.35 dyn/cm2), t 90% (1200 min), permeability coefficient (1.36 × 10−5 sq.cm/sec), with minimum viscosity (131 cps) under the non-physiological condition. The combination of gellan gum and carbopol 934P improved the gelation (synergistic effect) characteristics of the in situ gel. The optimized in situ gel was clear, isotonic, pH 4.7 and showed pseudoplastic flow, high in vitro gelling capacity, low contact angle, acceptable hardness (51018 gm), compressibility (64617 gm) and adhesiveness (74 gm) values for the ocular application. The ex vivo study showed the significant protection of the mast cell from the degranulation. The ocular irritation and histopathology studies in the rabbit eyes confirmed the safety of in situ gel for human use. The in vivo drug release studies showed the presence of drug in the rabbit tear fluid up to 3 h in comparison to just 1 h with the eye drop solution. The contact time of the in situ gel in the human eye was 15.0 ± 2.5 min, which was >2 folds higher than the marketed gel (6.0 ± 3.2 min), which could reduce the dosing frequency and total dose of drug. The Box-Behnken design facilitated the optimization of in situ gel for sustained ophthalmic drug delivery. [ABSTRACT FROM AUTHOR]

Down syndrome is the most common chromosomal disorder in humans as well as the most common cause of inherited intellectual disability. A spectrum of physical and functional disability is associated with the syndrome as well as a predisposition to developing particular malignancies, including testicular cancers. These tumours ordinarily have a high cure rate even in widely disseminated disease. However, individuals with Down syndrome may have learning difficulties, behavioural problems, and multiple systemic complications that have the potential to make standard treatment more risky and necessitates individualized approach in order to avoid unacceptable harm. There is also suggestion that tumours may have a different natural history. Further, people with learning disabilities have often experienced poorer healthcare than the general population. In order to address these inequalities, legislation, professional bodies, and charities provide guidance; however, ultimately, consideration of the person in the context of their own psychosocial issues, comorbidities, and possible treatment strategies is vital in delivering optimal care. We aim to present a review of our own experience of delivering individualized care to this group of patients in order to close the existing health inequality gap. [ABSTRACT FROM AUTHOR]

Angiogenesis, the sprouting of new blood vessels from existing vasculature, involves multiple complex biological processes, and it is an essential step for hemostasis, tissue healing and regeneration. Angiogenesis stimulants can ameliorate human disease conditions including limb ischemia, chronic wounds, heart disease, and stroke. The current strategies to improve the bioavailability of pro-angiogenic growth factors, including VEGF and FGF2, have remained largely unsuccessful. This study demonstrates that small molecules, termed click-xylosides, can promote angiogenesis in the in vitro matrigel tube formation assay and the ex ovo chick chorioallantoic membrane assay, depending on their aglycone moieties. Xyloside treatment enhances network connectivity and cell survivability, thereby, maintaining the network structures on matrigel culture for an extended period of time. These effects were achieved via the secreted xyloside-primed glycosaminoglycans (GAG) chains that in part, act through an ERK1/2 mediated signaling pathway. Through the remodeling of GAGs in the extracellular matrix of endothelial cells, the glycan approach, involving xylosides, offers great potential to effectively promote therapeutic angiogenesis. [ABSTRACT FROM AUTHOR]

"Ball valve thrombus" which is a spherical free-floating clot in left atrium is an often quoted, but uncommonly encountered complication in patients with severe mitral stenosis of rheumatic origin, who are in atrial fibrillation. We describe the case of a 48-year-old man with rheumatic heart disease, severe mitral stenosis, and severe aortic regurgitation. The patient presented with an episode of non-exertional syncope resulting in CVA 1 month back and breathlessness on exertion of 6 months duration and was in normal sinus rhythm. Echocardiography facilitated antemortem diagnosis and prompt institution of surgery was lifesaving. [ABSTRACT FROM AUTHOR]

Caesarean scar endometriosis (CSE) is a rare type of abdominal wall endometriosis and is frequently missed on initial presentation. A case of CSE diagnosed and treated by surgical excision is presented. Although rare, CSE should be considered a possibility in the differential diagnoses of pain and mass at scar site. [ABSTRACT FROM AUTHOR]

Cutting tool characterization plays a crucial role in understanding the behavior of machining operations. The selection of a suitable cutting material, the operating conditions for the work piece, is necessary to yield good cutting-tool life. Several pieces of research have been carried out in cutting-tool characteristics for turning operation. Only a few pieces of research have focused on correlating the vibrations and stress with wear characteristics. This research article deals with stress induced in silicon carbide tool inserts and coated tool inserts while machining SS304 steel. Since this material is much less resistant to corrosion and oxidation it is widely used in engineering applications such as cryogenics, the food industry and liquid contact surfaces. Moreover, these materials have much lower magnetic permeability so they are used as nonmagnetic engineering components which are very hard. This article focuses on the machining of SS304 by carbide tool inserts and then, the cutting forces were observed with a tool dynamometer. Using observed cutting forces, the induced stress in the lathe tool insert was determined by FEA investigation. This research also formulates an idea to predict the tool wear due to vibration. Apparently, the worn-out tool vibrates more than new tools. Using the results, the relation between stress, strain and feed rate, depth of cut and speed was found and mathematically modeled using MINI TAB. It was observed that carbide tool inserts with coating withstand better than uncoated tools while machining SS304. The results were anticipated and correlation between the machining parameters furnished the prediction of tool life and obtaining the best machining outcomes by using coated tool inserts. [ABSTRACT FROM AUTHOR]

Increasing global environmental problems and awareness towards the utilization of eco-friendly resources enhanced the progress of research towards the development of next-generation biodegradable and environmentally friendly material. The development of natural-based composite material has led to various advantages such as a reduction in greenhouse gases and carbon footprints. In spite of the various advantages obtained from green materials, there are also a few disadvantages, such as poor interfacial compatibility between the polymer matrix and natural reinforcements and the high hydrophilicity of composites due to the reinforcement of hydrophilic natural fibers. This review focuses on various moisture-absorbing and sound-absorbing natural fiber polymer composites along with the synopsis of preparation methods of natural fiber polymer composites. It was stated in various studies that natural fibers are durable with a long life but their moisture absorption behavior depends on various factors. Such natural fibers possess different moisture absorption behavior rates and different moisture absorption behavior. The conversion of hydrophilic fibers into hydrophobic is deemed very important in improving the mechanical, thermal, and physical properties of the natural-fiber-reinforced polymer composites. One more physical property that requires the involvement of natural fibers in place of synthetic fibers is the sound absorption behavior. Various researchers have made experiments using natural-fiber-reinforced polymer composites as sound-absorbing materials. It was found from various studies that composites with higher thickness, porosity, and density behaved as better sound-absorbing materials. [ABSTRACT FROM AUTHOR]

Chronic neuroinflammation and microglial dysfunction are key features of many neurological diseases, including Alzheimer's Disease and multiple sclerosis. While there is unfortunately a dearth of highly selective molecular imaging biomarkers/probes for studying microglia in vivo , P2Y12R has emerged as an attractive candidate PET biomarker being explored for this purpose. Importantly, P2Y12R is selectively expressed on microglia in the CNS and undergoes dynamic changes in expression according to inflammatory context (e.g. , toxic versus beneficial/healing states), thus having the potential to reveal functional information about microglia in living subjects. Herein, we identified a high affinity, small molecule P2Y12R antagonist (AZD1283) to radiolabel and assess as a candidate radiotracer through in vitro assays and in vivo positron emission tomography (PET) imaging of both wild-type and total knockout mice and a non-human primate. First, we evaluated the metabolic stability and passive permeability of non-radioactive AZD1283 in vitro. Next, we radiolabeled [11C]AZD1283 with radioactive precursor [11C]NH 4 CN and determined stability in formulation and human plasma. Finally, we investigated the in vivo stability and kinetics of [11C]AZD1283 via dynamic PET imaging of naïve wild-type mice, P2Y12R knockout mouse, and a rhesus macaque. We determined the half-life of AZD1283 in mouse and human liver microsomes to be 37 and > 160 min, respectively, and predicted passive CNS uptake with a small amount of active efflux, using a Caco-2 assay. Our radiolabeling efforts afforded [11C]AZD1283 in an activity of 12.69 ± 10.64 mCi with high chemical and radiochemical purity (>99%) and molar activity of 1142.84 ± 504.73 mCi/μmol (average of n = 3). Of note, we found [11C]AZD1283 to be highly stable in vitro , with >99% intact tracer present after 90 min of incubation in formulation and 60 min of incubation in human serum. PET imaging revealed negligible brain signal in healthy wild-type mice (n = 3) and a P2Y12 knockout mouse (0.55 ± 0.37%ID/g at 5 min post injection). Strikingly, high signal was detected in the liver of all mice within the first 20 min of administration (peak uptake = 58.28 ± 18.75%ID/g at 5 min post injection) and persisted for the remaining duration of the scan. Ex vivo gamma counting of mouse tissues at 60 min post-injection mirrored in vivo data with a mean %ID/g of 0.9% ± 0.40, 0.02% ± 0.01, and 106 ± 29.70% in the blood, brain, and liver, respectively (n = 4). High performance liquid chromatography (HPLC) analysis of murine blood and liver metabolite samples revealed a single radioactive peak (relative area under peak: 100%), representing intact tracer. Finally, PET imaging of a rhesus macaque also revealed negligible CNS uptake/binding in monkey brain (peak uptake = 0.37 Standard Uptake Values (SUV)). Despite our initial encouraging liver microsome and Caco-2 monolayer data, in addition to the observed high stability of [11C]AZD1283 in formulation and human serum, in vivo brain uptake was negligible and rapid accumulation was observed in the liver of both naïve wildtype and P2Y12R knockout mice. Liver signal appeared to be independent of both metabolism and P2Y12R expression due to the confirmation of intact tracer in this tissue for both wildtype and P2Y12R knockout mice. In Rhesus Macaque, negligible uptake of [11C]AZD1283 brain indicates a lack of potential for translation or its further investigation in vivo. P2Y12R is an extremely promising potential PET biomarker, and the data presented here suggests encouraging metabolic stability for this scaffold; however, the mechanism of liver uptake in mice should be elucidated prior to further analogue development. [Display omitted] [ABSTRACT FROM AUTHOR]

Accurate target delineation/contouring is essential for radiation treatment planning and the clinical efficacy of radiation therapy. Clinical trial data has demonstrated the importance of quality contouring and treatment planning for optimal survival outcomes. As a result, improving the quality of target delineation is an important goal in the education of radiation oncology residents. However, there is limited quantitative data on the quality of residents' contours. Therefore, it would be beneficial to track performance and improvement in resident target delineation during residency. The purpose of this study was to determine if it was feasible to track the concordance of radiation oncology residents' contours with faculty physicians' contours. Residents were asked to contour target volumes (GTV, CTV, ITV, PTV, etc.) based on patient history, physical exam, clinical stage and fused diagnostic imaging and were allowed to use any available outside resources, including textbooks, review articles, consensus guidelines, and online atlases. Resident contours were saved as separate structures. Finalized, faculty physician-approved contours were also saved. Saved contour structures and data from October 2019 through June 2020 were reviewed for feasibility. In total, 209 structures had both resident and faculty versions saved within Eclipse and were available for analysis. The Boolean Operations Tool in Eclipse (Varian Medical Systems, Palo Alto, CA, USA) was used to create an intersection volume of the resident/faculty contours. Separately, the Boolean Operations Tool was used to create a union volume of the resident/faculty contours. Based on these two volumes, the Jaccard Concordance Index (JCI) was calculated by dividing the intersection volume (in cubic centimeters [cc]) by the union volume (cc). The JCI could be successfully calculated for 203 (97.1%) of the 209 structures. For 6 structures (2.9%), both the intersection and union volumes could not be calculated because the volumes were too small for Eclipse to determine. All 6 of these structures were small brain metastases. Tracking and comparing the concordance of resident contours and faculty physician contours is feasible using available tools in Eclipse. Additional data collection and assessment is necessary before this technique can be more widely utilized. [ABSTRACT FROM AUTHOR]

Understanding the biocompatibility of metallic nanoparticles (MNPs) is pivotal for biomedical applications. The biocompatibility of plant-derived MNPs has been mostly attributed to capped plant molecules. This claim seems to be straightforward but lacks conclusive evidence. The capped phytochemicals and the metallic core might have decisive and individual roles in imparting the overall biocompatibility. Whether capped phytochemicals really make sense in diminishing the toxicity effect of the otherwise naked or metallic core needs further analysis. Here, we readdress the biocompatibility of plant-derived MNPs with references to contemporary cellular assays, different reactants for green synthesis, possible epigenetic involvement, and nanobiocompatibility at the molecular level. Finally, we discuss relevant in vivo studies and large-scale production issues. [ABSTRACT FROM AUTHOR]

Pulp and paper solid waste (PPSW) originating from paper industry, was experimented for the production of fumaric acid (FA) through submerged and solid state fermentation by utilizing the filamentous fungus Rhizopus oryzae 1526 . Physicochemical characterization, pH and moisture content analysis of PPSW was carried out. Pre-treatment of PPSW by size reduction resulted in particles of different size ranges (1.7 mm < x ≤ 3.35 mm, 850 μm < x ≤ 1.7 mm, 300 μm < x ≤ 850 μm, 75 μm < x ≤ 300 μm and 33 μm < x ≤ 75 μm). In submerged fermentation with all particle size ranges, a maximum of 23.47 ± 0.70 g/L of FA was obtained with 33 μm < x ≤ 75 μm under the fermentation conditions of 30 °C, 200 rpm, 5% pre-cultured inoculum ( v/v ) and at 48 h. Viscosity measurement and analysis of by-product of the fermented broths were performed. Microwave-phosphoric acid mediated hydrolysis of 33 μm < x ≤ 75 μm particle size produced hydrolysate with maximum glucose (11.2 ± 0.8 g/L) and xylose (20.22 ± 0.85 g/L) contents. Submerged fermentation with this hydrolysate confirmed the utilization of xylose for both FA production and fungal growth. Solid state fermentation with 75 μm < x ≤ 300 μm particle size resulted in highest FA production (41.45 g/kg dry weight) after 21 days. Scanning electron microscopy revealed the morphological features of the fungus grown on the particles. The results of the present study confirmed the utilization of PPSW as a source of carbon and trace elements by the fungus R. oryzae 1526 and also the bioconversion into FA during fermentation. FA being a high value platform chemical, its bioproduction from the low cost PPSW, is a value addition approach. [ABSTRACT FROM AUTHOR]

The present research account deals with the bioproduction of fumaric acid (FA) from apple pomace ultrafiltration sludge (APUS) and apple pomace (AP) through fermentation. The filamentous fungus Rhizopus oryzae 1526 was used as a biocatalyst and its morphological impact on FA production was analysed in detail. For submerged fermentation, 40 g L −1 of total solids concentration of APUS, pH 6.0, 30 °C, 200 rpm flask shaking speed and 72 h of incubation were found to be optimum for FA production (25.2 ± 1.0 g L −1 , 0.350 g (L −1 h −1 )). Broth viscosity (cP), residual reducing sugar (g L −1 ) and ethanol (g L −1 ) produced as by-product, were also analysed. Plastic trays were used for solid state fermentation and at optimized level of moisture and incubation period, 52 ± 2.67 g FA per kg dry weight of AP was obtained. Changes in the total phenolic content (mg g −1 dry weight of AP) were monitored at regular intervals. Utilization of APUS and AP for the directed synthesis of the high-value platform chemical FA by the fungal strain R. oryzae 1526 was an excellent display of fungal physiological and morphological control over a fermentative product. [ABSTRACT FROM AUTHOR]

• Many head/neck squamous cell cancer patients develop recurrence or second primary. • Re-irradiation is a curative treatment option for these patients. • However, it is associated with significant risk of toxicity. • Pulsed Reduced Dose Rate radiation may reduce re-irradiation toxicity. Pulsed reduced dose rate (PRDR) radiation (RT) is a re-irradiation (Re-RT) technique that potentially overcomes dose/volume constraints in the setting of previous RT. There is minimal data for its use for recurrent or secondary primary head and neck squamous cell carcinoma (HNSCC). In this study, we report preliminary data from our institution of a consecutive cohort of HNSCC patients who received PRDR Re-RT. Nine patients received PRDR Re-RT from August 2020 to January 2023 and had analyzable data. Intensity modulated RT was used for treatment delivery and a wait time between 20 cGy arc/helical deliveries was used to achieve the effective low dose rate. Data collected included patient demographic information, prior interventions, diagnosis, radiation therapy dose and fractionation, progression free survival, overall survival, and toxicity rates. The median time to PRDR-RT from completion of initial RT was 13 months (range, 6–50 months). All but one patient underwent salvage surgery prior to PRDR-RT. The median follow-up after Re-RT was 7 months. The median OS from PRDR-RT was 7 months (range, 1–32 months). Median PFS was 7 months (range, 1–32 months). One patient (11.1 %) had acute grade 3 toxicity, and two patients (22.2 %) had late grade 3 toxicities. There were no grade 4+ toxicities. PRDR Re-RT is a feasible treatment strategy for patients with recurrent or second primary HNSCC. Initial findings from this retrospective review suggest reasonable survival outcomes and potentially improved toxicity; prospective data is needed to establish the safety and efficacy of this technique. [ABSTRACT FROM AUTHOR]

Background: Nepal has implemented the social health security program in certain health facilities to improve access to quality health services. The aim of the study is to understand the utilization pattern of social health security schemes and community's perception of the social health security program. Method: A descriptive cross-sectional mixed-method study was conducted among 300 households of Illam district who had enrolled in the social health security scheme. A multi-stage random sampling method was used. A semi-structured questionnaire was used to collect quantitative data whereas focus group discussions (FGDs) were conducted for qualitative data. Descriptive analysis, bivariate and multivariate analysis was done. FGDs were transcribed and thematic analysis was done. Findings: The utilization rate of social health security scheme was 88.7%. Factors associated with the utilization of program included: presence of under-five children and chronic illness in households, sex and age group. Focus group discussion revealed that people were aware of social health insurance and pleased with program implemented by government. However, the hospitals under the social health insurance were not able to meet their expectations. Conclusion: Although the utilization of social health security scheme was high, people were dissatisfied with the service provided by the hospital under the social health security scheme. Therefore, the social health insurance board should closely monitor the hospitals and develop a feedback mechanism from the users. [ABSTRACT FROM AUTHOR]

Conservation agriculture (CA), which encompasses minimum soil disturbance, residue retention either through crop residue, or cover crops and crop diversification-based crop management practices can modify the status of pest dynamics and activities under the changing climatic scenarios. CA has been advocated extensively to optimize the use of available resources, maintain the environmental quality, enhance crop productivity, and reduce the climate change impacts. Information related to the impacts of long-term CA-production systems under rice-based cropping systems on pest status is lacking, particularly in middle Indo-Gangetic Plains (MIGP). Under CA, puddling is completely avoided, and rice is directly sown or transplanted to maintain better soil health. Different sets of experimentations including farmers practice, partial CA and full CA (CA) as treatments in rice-based cropping systems, were established from 2009, 2015 and 2016 to understand the long-term impacts of CA on pest dynamics. In this study, direct and indirect effects of tillage (zero, reduced and conventional tillage), residue retention and cropping sequences on abundance and damage by pests were investigated. After 4–5 years of experimentation, populations of oriental armyworm [Mythinma (Leucania) (Pseudaletia) separata (Wlk.)] in wheat, mealybug [Brevennia rehi (Lindinger)] and bandicoot rat [Bandicota bengalensis (Gray)] in rice were found to increase abnormally in CA-based production systems. Conventionally tilled plots had a significant negative effect while residue load in zero-tilled plots had a significant positive effect on larval population build-up of M. separata. Zero tillage had a higher infestation of mealybug (52–91% infested hills) that used grassy weeds (Echinochloa colona, Echinochloa crusgalli, Cynodon dactylon, Leptochloa chinensis and Panicum repense) as alternate hosts. Cropping sequences and no disturbance of soil and grassy weeds had higher live burrow counts (4.2 and 13.7 burrows as compared to 1.47 and 7.53 burrows per 62.5 m2 during 2019–2020 and 2020–2021, respectively) and damaged tillers (3.4%) in CA-based practices. Based on the present study, pest management strategies in CA need to be revisited with respect to tillage, residue retention on soil surface, grassy weeds in field and cropping sequences to deliver the full benefits of CA in MIGP to achieve the sustainable development goals under the climate change scenarios. [ABSTRACT FROM AUTHOR]

Abstract: Crowdsourcing, outsourcing of tasks to a crowd of unknown people (“workers”) in an open call, is rapidly rising in popularity. It is already being heavily used by numerous employers (“requesters”) for solving a wide variety of tasks, such as audio transcription, content screening, and labeling training data for machine learning. However, quality control of such tasks continues to be a key challenge because of the high variability in worker quality. In this paper we show the value of decision-theoretic techniques for the problem of optimizing workflows used in crowdsourcing. In particular, we design AI agents that use Bayesian network learning and inference in combination with Partially-Observable Markov Decision Processes (POMDPs) for obtaining excellent cost-quality tradeoffs. We use these techniques for three distinct crowdsourcing scenarios: (1) control of voting to answer a binary-choice question, (2) control of an iterative improvement workflow, and (3) control of switching between alternate workflows for a task. In each scenario, we design a Bayes net model that relates worker competency, task difficulty and worker response quality. We also design a POMDP for each task, whose solution provides the dynamic control policy. We demonstrate the usefulness of our models and agents in live experiments on Amazon Mechanical Turk. We consistently achieve superior quality results than non-adaptive controllers, while incurring equal or less cost. [Copyright &y& Elsevier]

Background: The incidence of oligometastases to the brain in good performance status patients is increasing due to improvements in systemic therapy and MRI screening, but specific management pathways are often lacking. Methods: We established a multi-disciplinary brain metastases clinic with specific referral guidelines and standard follow-up for good prognosis patients with the view that improving the process of care may improve outcomes. We evaluated patient demographic and outcome data for patients first seen between February 2007 and November 2011. Results: The clinic was feasible to run and referrals were appropriate. 87% of patients referred received a localised therapy during their treatment course. 114 patients were seen and patient numbers increased during the 5 years that the clinic has been running as relationships between clinicians were developed. Median follow-up for those still alive was 23.1 months (6.1-79.1 months). Primary treatments were: surgery alone 52%, surgery plus whole brain radiotherapy (WBRT) 9%, radiosurgery 14%, WBRT alone 23%, supportive care 2%. 43% received subsequent treatment for brain metastases. 25%, 11% and 15% respectively developed local neurological progression only, new brain metastases only or both. Median overall survival following brain metastases diagnosis was 16.0 months (range 1-79.1 months). Breast (32%) and NSCLC (26%) were the most common primary tumours with median survivals of 26 and 16.9 months respectively (HR 0.6, p=0.07). Overall one year survival was 55% and two year survival 31.5%. 85 patients died of whom 37 (44%) had a neurological death.Conclusion: Careful patient selection and multi-disciplinary management identifies a subset of patients with oligometastatic brain disease who benefit from aggressive local treatment. A dedicated joint neurosurgical/neuro-oncology clinic for such patients is feasible and effective. It also offers the opportunity to better define management strategies and further research in this field. Consideration should be given to defining specific management pathways for these patients within general oncology practice. [ABSTRACT FROM AUTHOR]

A prototype of a nano solar cell containing the mycobacterial channel protein MspA has been successfully designed. MspA, an octameric transmembrane channel protein from Mycobacterium smegmatis, is one of the most stable proteins known to date. Eight Ruthenium(II) aminophenanthroline-viologen maleimide Diads (Ru-Diads) have been successfully bound to the MspA mutant MspAA96C via cysteine-maleimide bonds. MspA is known to form double layers in which it acts as nanoscopic surfactant. The nanostructured layer that is formed by (Ru-Diad)8MspA at the TiO2 electrode is photochemically active. The resulting "protein nano solar cell" features an incident photon conversion efficiency of 1% at 400 nm. This can be regarded as a proof-of-principle that stable proteins can be successfully integrated into the design of solar cells. [ABSTRACT FROM AUTHOR]

Summary Submerged citric acid (CA) bioproduction was carried out by Aspergillus niger NRRL-567 using various industrial wastes, such as brewery spent liquid (BSL), lactoserum and starch industry water sludge. CA bioproduction was carried out by varying the temperature (25-35 °C), pH (3-5), addition of inducers, incubation time and supplementation with different proportions of apple pomace ultrafiltration sludge (APS). The results indicated that under the best conditions with 3% (v/v) methanol, the optimal concentration of 11.34 g L−1 CA was recorded using BSL at pH 3.5 and temperature 30 °C after 120-h incubation period. Supplementation of methanol resulted in an increase of 56% CA production. Meanwhile, under similar conditions, higher concentration of 18.34 g L−1 CA was reported with the supplementation of BSL with 40% (v/v) APS having suspended solids concentration of 30 g L−1. The present study demonstrated the potential of BSL supplemented with APS as an alternative cheap substrate for CA fermentation. [ABSTRACT FROM AUTHOR]

Abstract: Ever-growing demand for citric acid (CA) and urgent need for alternative sources has served as a driving force for workers to search for novel and economical substrates. Submerged fermentation was conducted using apple (Malus domestica) pomace ultrafiltration sludge as an inexpensive substrate for CA bioproduction, using Aspergillus niger NRRL567. The crucial parameters, such as total suspended solids and inducer concentration, were optimised by response surface methodology for higher CA production. The optimal CA concentrations of 44.9g/100g and 37.9g/100g dry substrate were obtained with 25g/l of initial total solids and 3% (v/v) methanol and 25g/l of total solids and 3% (v/v) ethanol concentration, respectively, after the 144h of fermentation. Results indicated that total solids concentration, and methanol as an inducer, were effective with respect to higher CA yield and also indicated the possibility of using apple pomace sludge as a potential substrate for economical production of CA. [Copyright &y& Elsevier]

Citric acid consumption is escalating gradually, witnessing high annual growth rate due to more and more advanced applications coming to light. The present review discusses different aspects of fermentation and effects of various environmental parameters and deals with the potential ways to increase the yield of citric acid to meet the ever-increasing demands of this commercially important organic acid. Different techniques for the hyperproduction of citric acid are continuously being studied from the past few decades and still there is a gap, and hence, there is an obvious need to consider new pragmatic ways to achieve industrially feasible and environmentally sustainable bio-production of citric acid. The utilization of inexpensive agro-industrial wastes and their by-products through solid-state fermentation by existing and genetically engineered strains is a potential route. This review also deals with downstream processing considering the classical and advanced approaches, which also need significant improvement. In situ product recovery method which leads to improved yields and productivity can be further optimized for large-scale production and recovery of citric acid. [ABSTRACT FROM AUTHOR]

Abstract: In view of ever growing demand of citric acid, there is an urgent need to look for inexpensive and novel substrates for feasible production of citric acid. In this context, the present study was carried out to evaluate the potential of different agro-industrial wastes for hyper production of citric acid through solid-state and submerged fermentation by Aspergillus niger NRRL 567 and NRRL 2001. It was found that among all the solid substrates utilized, apple pomace with 66.0±1.9g/kg of dry substrate proved to be an excellent substrate for citric acid production by A. niger NRRL 567 at 72h of incubation. A. niger NRRL 2001 resulted in slightly lower citric acid concentration of 61.0±1.9g/kg of dry substrate at the same incubation time. APS-1 (apple pomace ultrafiltration sludge-1) gave highest citric acid production rate of 9.0±0.3g/l and 8.9±0.3g/l of substrate by A. niger NRRL 567 and NRRL 2001 by submerged fermentation, respectively. Further study with apple pomace and apple pomace ultrafiltration sludge-1 by A. niger NRRL 567 was carried out. Addition of 3% (v/w) ethanol and 4% (v/w) methanol to apple pomace gave significantly higher citric acid values of 127.9±4.3g/kg and 115.8±3.8g/kg of dry substrate by A. niger NRRL 567 by solid-state fermentation. Higher citric acid values of 18.2±0.4g/l and 13.9±0.4g/l of apple pomace ultrafiltration sludge-1 were attained after addition of 3% (v/v) ethanol and 4% (v/v) methanol, respectively by A. niger NRRL 567. Apple pomace solid waste and apple pomace ultrafiltration sludge-1 thus proved to be an excellent source for citric acid production, of the different substrates chosen. [Copyright &y& Elsevier]

In this study, the interactions of two gold nanoparticles of different sizes (average diameters of 3.7 ± 2.6 and 17 ± 3 nm) with octameric mycobacterial porin A from Mycobacterium smegmatis(MspA) and a mutant of MspA featuring a cysteine mutation in position 126 (Q126C) are investigated. From the observation of enhanced photoluminescence quenching, it is inferred that the presence of eight cysteines in the MspA Q126C mutant significantly enhances the binding of selected small gold nanoparticles within the inner pore of MspA. The large gold nanoparticle/porin complex shows photoluminescence enhancement, which is expected since the larger nanoparticles cannot dock within the homopore of MspA due to size exclusion. In addition to the fluorescence experiments, observation of energy transfer from the small gold nanoparticles to the MspA shows the close proximity of the small gold nanoparticles with the porin. Interestingly, the energy transfer of the large nanoparticle/MspA complex is completely missing. From high-performance liquid chromatography data, the estimated binding constants for small Au@MspA, large Au@MspA, small Au@MspA cys, and large Au@MspA cysare 1.3 × 10 9, 2.22 × 10 10, > 10 12(irreversible), and 1.7 × 10 10, respectively. [ABSTRACT FROM AUTHOR]

Deteriorating soil health, diminishing soil organic carbon (SOC), development of subsurface hard compact layer and declining system productivity are barriers to achieving sustainable production in the traditional rice–wheat cropping system (TA) in the eastern Indo‐Gangetic Plain of India. Conservation agriculture (CA), which favours minimum soil disturbance, crop residue retention and crop diversification could be a viable alternative to the TA to address most of those major problems. With that in mind, a long‐term experiment is being implemented at ICAR‐RCER, Patna, Bihar, India, with four treatments: (a) TA, (b) full CA (fCA) and (c and d) partial CA (pCA1 and pCA2), differing in crop establishment methods, cropping system and crop residue management in a randomized complete block design. Measurement of soil health parameters was carried out in the 11th year of the experiment. The results revealed a beneficial effect of CA and 46 and 40% increase in SOC concentration and stock, respectively, under fCA over TA in the 0–7.5‐cm soil layer. The effect of partial CA (pCA1 and pCA2) was variable, but an increasing trend was always observed under pCA compared to TA. There was an enrichment in SOC content of aggregates under CA irrespective of size class; however, no relation was found between SOC content and aggregate diameter. The contribution of macroaggregates to SOC stock was larger (36–66%) under CA in the 0–7.5‐cm soil layer. Adoption of CA improved the macroaggregate content, MWD and GMD of aggregates, and aggregation ratio. Soil macropore content was greater under fCA, whereas other parameters were similar among treatments. The impact of CA was mostly limited to 0–7.5 cm soil layer and a maximum up to 15 cm soil depth while evaluation until 60 cm soil depth was realized. The yield of rice in CA was comparable to or higher than in TA, whereas the system rice equivalent yield was always higher (38–53%) under CA than under the conventional practices. Therefore, a CA‐based cropping system must be encouraged, to increase SOC status, improve aggregation stability and, consequently, sustain or increase system productivity, in order to achieve food and nutritional security in the eastern Indo‐Gangetic Plain of India. Highlights: Effects of long‐term conservation agriculture (CA) on soil C, aggregation and yield were evaluated.CA improved SOC concentration and stock by 46 and 40%, as well as macroaggregate SOC stock by 36–66%.Macro‐aggregation and mean weight diameter improved in CA but was mostly limited to a shallow soil depth.CA can be promoted for sustainability of a rice–wheat system due to higher productivity (38–53%). [ABSTRACT FROM AUTHOR]

• A novel weighted ensemble algorithm is proposed for indoor localization. • Obtained around 95% accuracy even when train and test conditions are different. • Incorporating mean and variance of RSSIs improve accuracy of the ensemble to 98%. • The algorithm works for varying granularity: room level grid and 1m × 1m grid. Indoor localization systems have the capability to change the way of providing location-based services in a closed environment. Though there is no agreed-upon technology that works best in indoor, WiFi signal is an important alternative as most of such places are covered by WiFi Access Points (APs). In this paper, the problem of indoor localization is investigated from the perspective of expert systems through applying machine learning techniques. The significant variation of WiFi signal strength with ambient conditions as well as device configuration badly affects the localization accuracy. Thus, the fingerprinting effort required to train a localization system subject to context heterogeneity is huge. The uncertainty in localization performance due to varying contexts is hardly investigated in the literature. Consequently, the main contribution of this paper is to propose a weighted ensemble classifier based on Dempster–Shafer belief theory to efficiently handle context heterogeneity. Here, the context is defined in terms of different smartphone configurations used for training and testing the system as well as temporal variation of signals. The method presented here utilizes the Dempster–Shafer theory of belief functions to calculate the weights of the base learners in the decision of the ensemble. Belief theory is applied here to handle the inherent uncertainty in WiFi signal variations due to heterogeneous context. Real life experiments are conducted for two datasets, JUIndoorLoc and UJIIndoorLoc at different granularity levels. For JUIndoorLoc, with state-of-the-art classifiers, 86–97% accuracy can be achieved for 10-fold cross-validation. However, when the training context differs from the test conditions, accuracy drops to 62–87%. In such a scenario, the proposed weighted ensemble technique is found to achieve almost 98% localization accuracy when RSSIs, mean and variance of RSSIs are considered as features. The technique can lead to an effective expert system for indoor localization at varying granularity levels. Such systems would be beneficial for pervasive indoor positioning applications as no dedicated infrastructure is needed for positioning. [ABSTRACT FROM AUTHOR]

• Microwave assisted extraction of fungal chitosan has been found to be efficient. • Optimization of the microwave power and duration of incubation was performed. • Higher chitosan yield of 13.43% w/w dry biomass. • Chitosan of 94% degree of deacetylation. • The energy consumption bill significantly lower, 1.1 vs 50 cents. Microwave-assisted extraction (MAE) of chitosan from dried fungal biomass of Rhizopus oryzae NRRL1526, obtained by culturing on potato dextrose broth (PDB), was performed and the optimal conditions required were identified using statistical analysis for the first time in this study. This microwave-assisted extraction (MAE) was compared against the conventional autoclave assisted method of chitosan extraction. The full factorial experimental design was used to investigate the impact of operating parameters of MAE, microwave power (100 W–500 W), and duration (10 min–30 min), on alkaline insoluble material (AIM) yield, chitosan yield, and degree of deacetylation (DDA). The effect of operating conditions was then evaluated using full factorial data analysis and optimum condition for MAE of chitosan was identified using response surface methodology to be 300 W and 22 min. This optimum condition identified was then further evaluated and the chitosan obtained characterized. Higher chitosan yield of 13.43 ± 0.3% (w/w) of fungal biomass was obtained when compared to that obtained, 6.67% ± 0.3% (w/w) of dry biomass, for the conventional extraction process. MAE yielded chitosan of higher degree of deacetylation, 94.6 ± 0.9% against 90.6 ± 0.5% (conventional heating), but the molecular weight was observed to be similar to that obtained by using conventional autoclave heating. MAE of chitosan was observed to yield a higher quantity of chitosan when compared to conventional extraction process and obtained chitosan exhibited a higher degree of deacetylation as well as molecular weight. The lower energy consumption of 0.11 kW h for MAE (5 kW h for conventional process) and the concomitant reduction in the energy bill to 1.1 cents from 50 cents, in addition to the above results, show that microwave irradiation is a more efficient and environment-friendly means to obtain chitosan from fungal biomass. [ABSTRACT FROM AUTHOR]

Summary: The study evaluated the effectiveness of 'Mass Vaccination Campaign (MVC)' implemented against the contagious transboundary OIE notified Peste des petits ruminants (PPR) in sheep and goats on the lines of 'pulse polio campaign' for humans in Chhattisgarh state, India. The effectiveness was evaluated on the axes of adequacy, financial viability under with and without MVC through differencing under various scenarios and options and programme impact from a farmer's perspective. The adequacy evaluation revealed that the reported outbreaks, diagnosed and death cases declined under PPR‐MVC inconsonance with increased vaccination coverage. Furthermore, the seroconversion increased during post PPR‐MVC implies elevated immunity levels in the sheep and goat population. The estimated mean mortality loss was USD 45.2 and USD 16.5 per animal in goats and sheep, respectively, whereas the treatment and opportunity cost of labour was USD 1.9 and USD 2.5 per animal respectively. Under the low PPR incidence scenario, benefit: cost ratio, net present value and internal rate of return were 4.9:1, 48.9 million USD and 146.6%, whereas it was 12.4:1,142.7 million USD and 430.4% and 13.5:1,156.7 million USD and 430.4% under medium and high incidence scenarios. Furthermore, the option of vaccinating 100% risk population during the first year followed by 30% during subsequent years to cover naïve population will maximize benefits than 100% coverage every year; nevertheless, benefits outweighs cost manifolds in both of these options. The farmers had a positive opinion on the overall services provided under PPR‐MVC and the results provide the empirical evidence on effectiveness of 'mass vaccination' for its replication in other states of India or countries with similar socio‐economic and rearing environments. [ABSTRACT FROM AUTHOR]

Abstract Laccase is one of the widely used enzymes for biotechnological processes. Immobilization of enzymes is a universally accepted approach to increase their reusability and stability. In this study, laccase enzyme from Trametes versicolor was encapsulated for the first time in a chitosan-nanobiochar matrix. The chitosan-tripolyphosphate gel formation technique was employed to produce homogeneous biocatalyst nanoparticles, with 35% effective binding efficiency and 3.5 Units/g apparent activity under the best configuration. The reusability of the encapsulated laccase was demonstrated towards the oxidation of 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS) for several consecutive cycles, exhibiting 30% of the initial activity after 5 cycles. The encapsulated laccase showed a moderate increase in enzyme stability against pH and temperature variation compared to the free enzyme. Moreover, the storage stability of laccase at both 4 °C and 25 °C was increased after immobilization. Only 2% of laccase was leaked during a 5-day period from biocatalyst. Laccase in its free form showed no antibacterial activity against Gram positive and Gram-negative model microorganisms, while encapsulated laccase showed antibacterial activity towards Gram-positive ones. Thus, the encapsulation of the laccase is an efficient method to keep the enzyme active and stable for different applications. Highlights • The biocatalyst showed 35% of binding efficiency and 3.5 Units/g apparent activity. • The encapsulated laccase showed higher stability compare to free enzyme. • Encapsulated laccase onto chitosan-nanobiochar exhibited antimicrobial activity. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Fluoroquinolones-trivalent metal ion complexes are more stable than divalent metal ions. • Metal ions may act as an intermediate in binding between fluoroquinolones and DNA/enzyme. • Correlation of antibacterial and sorption properties of fluoroquinolones was affected by metal complexation. • Mobility fluoroquinolones is affected by environmental factors such as pH, temperature and presence of metal ions. Abstract Fluoroquinolones (FQs), the group of broad spectrum antimicrobials, are frequently detected in different environmental compartments, mostly due to incomplete metabolism in the target organism, inefficient wastewater treatment, and disposal of expired FQs directly into the environment. Another group of the contaminants, widely present in water, air, and soils, are the metal ions (Me). In general, FQs can form stable complexes with metal ions and their co-existence with Me in the environment leads to metal complexation. The most stable complexes are formed between FQs and trivalent ions, whereas FQs and alkali-earth metal ions, i.e. Ca2+ and Mg2+, are the least stable composites. This interaction between FQs and metal ions may alter antibiotic properties. Antibacterial activity of metal complexes is generally comparable with the parent compound; however, some FQs-metal complexes are found to exhibit higher antibacterial activity. Moreover, it was proved that FQs-Me complex can display antifungal potency toward Candida albicans. The mobility of FQs in soil and/or water strongly depends on pH, temperature, and type of metal ions, present in the environment. This review provides a brief description of FQs, their properties, and capacity to form complexes with metal ions. It summarizes influence of FQs-Me complexes on microorganisms and their mobility in different media. Further, the review provides a linkage between the presence of these metal ions in the environment and their effect on the chemistry and biology of fluoroquinolone antibiotics. [ABSTRACT FROM AUTHOR]

Although enzymes are gifted with unique and unprecedented catalytic activity and selectivity over a wide range of pollutants, still their stability related issues often hinder their application in real environmental conditions. In this study, agro-industrially produced crude laccase was concentrated using ultrafiltration. Crude laccase was immobilized on pine wood (BC-PW), pig manure (BC-PM) and almond shell (BC-AS) biochar microparticles. Immobilization of laccase was investigated at various laccase activities on micro-biochars and the release (desorption) of the enzyme has been studied. It was observed that for all the biochars, as the initial concentration of laccase increased in the crude solution, the binding capacity and as result immobilization efficiency also increased. BC-PM was found to be the most effective (31.4 ± 3.1 U g −1 ) at 10 U mL −1 of enzyme activity followed by BC-AS (24.3 ± 4.8 U g −1 ) and BC-PW (14.58 ± 3.3 U g −1 ). In addition, the biochars were functionalized with citric acid for possible surface modifications and the effect of biochars for the adsorption of enzymes has been investigated. Isotherm studies of enzyme loading onto biochar established homogeneous monolayer adsorption as the major mechanism. The desorption of laccase from all biochars followed pseudo-second-order model. Immobilized laccase exhibited superior storage ability and shelf-life which were three times higher than free laccase. Finally, the immobilized laccase was used for the degradation of micropollutant, DCF and near 100% removal was obtained within 5 h at an environmentally relevant concentration (500 μg L −1 ). [ABSTRACT FROM AUTHOR]

Immobilization of enzymes on the solid supports can improve the stability as well as catalytic properties of enzymes. In this study, biochar derived from various feedstocks were used as immobilization support considering biochars carbon negative as well as sustainable properties. Partially purified (concentrated) crude laccase was covalently immobilized onto pine wood (BC-PW), pig manure (BC-PM) and almond shell (BC-AS) micro-biochars using optimized 5% w/v glutaraldehyde. Moreover, citric acid pretreatment improved the laccase binding capacity of all the micro-biochars and the highest laccase binding of 40.2 ± 1.8 U g −1 was observed with BC-PM in comparison with raw BC-PM (34.1 ± 1.1 U g −1 ). The enhanced binding of laccase on BC-PM over wood derived biochars was attributed to the higher surface area (46.1 m 2  g −1 ) of BC-PM. Moreover, feedstock selection as well as a method of production influenced the biochar physicochemical properties such as surface area and consequently, different biochars showed various laccase immobilization efficiencies. BC-PW showed better pH, thermal, storage, and operational stability, compared with BC-AS and BC-PM. While applying the laccase bound micro-biochar, complete removal was observed in 2 h under batch mode with 0.5 g of laccase bound BC-PM at an environmentally relevant concentration of 500 µg L −1 in wastewater effluent. About 40% of the laccase activity was retained with all the laccase-bound micro-biochars after 5 cycles of diclofenac treatment. [ABSTRACT FROM AUTHOR]

Brewery liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry waste (SIW) were evaluated as alternative feedstocks for levulinic acid (LA) production via microwave-assisted acid-catalyzed thermal hydrolysis. LA production of 204, 160, 66, 49 and 12 g/kg was observed for BLW, BSG, APS, APUS, and SIW, respectively, at 140 °C, 40 g/L substrate concentration (SC), 60 min and 2 N HCl (acid concentration). Based on the screening studies, BLW and BSG were selected for optimization studies using response surface methodology. Maximum LA production of 409 and 341 g/kg for BLW and BSG, respectively were obtained at 160 °C, 4.5 M HCl, 85 g/L SC and 27.5 min. Results demonstrated the possibility of using brewery wastes as promising substrates for economical and higher yield production of LA, a renewable platform chemical and versatile precursor for fuels and chemicals. [ABSTRACT FROM AUTHOR]

Abstract: This study investigates the removal of chlortetracycline (CTC) antibiotic using sulfate radical-based oxidation process. Sodium persulfate (PS) was used as a source to generate sulfate radicals by homogeneous (Fe 2+ ) and heterogeneous (zero valent iron, ZVI) iron as a catalyst. Increased EDTA concentration was used to break the CTC-Fe metal complexes during CTC estimation. The influence of various parameters, such as PS concentration, iron (Fe 2+ and ZVI) concentration, PS/iron molar ratio, and pH were studied and optimum conditions were reported. CTC removal was increased with increasing concentration of PS and iron at an equal molar ratio of PS/Fe 2+ and PS/ZVI processes. PS/Fe 2+ and PS/ZVI oxidation processes at 1:2 (500 μM PS and 1000 μM) molar ratio showed 76% and 94% of 1 μM CTC removal in 2 h. Further increased molar ratio 1:2 onwards, PS/Fe 2+ process showed a slight increase in CTC degradation whereas in PS/ZVI process showed similar degradation to 1:2 (PS/Fe) ratio at constant PS 500 μM concentration. Slower activation of persulfate which indirectly indicates the slower generation of sulfate radicals in PS/ZVI process showed higher degradation efficiency of CTC. The detected transformation products and their estrogenicity results stated that sulfate radicals seem to be efficient in forming stable and non-toxic end products. [ABSTRACT FROM AUTHOR]

In the current study, sequential nitrification and anoxic experiments in synthetic municipal wastewater were exposed to 0.5 to 100 mg/L of chlortetracycline for 24 h to evaluate acute impact on the nitrification, and denitrification processes of biological treatment. Both processes were significantly (p < 0.05) inhibited at >50 mg/L of chlortetracycline, and the results revealed that nitrification was adversely affected by chlortetracycline compared with the anoxic process. In nitrification, chemical oxygen removal (COD) and ammonia oxidation kinetics were 50% inhibited at 10 mg chlortetracycline/L, and nitrite oxidation kinetics at 0.5 mg chlortetracycline/L. Likewise, in the anoxic process, 14 and 10 mg/L of chlortetracycline inhibited 50% of COD removal and nitrate reduction kinetics, respectively. In nitrification and denitrification, 90% of chlortetracycline was removed by adsorbing onto sludge suspended solids. In addition, a higher chlortetracycline concentration in anoxic effluent, compared with aerobic effluents, indicated a dissimilarity in the composition of sludge solids, pH, and biomass production for both processes. [ABSTRACT FROM AUTHOR]

Brewery industry liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry wastewater (SIW) have been considered as substrates to produce biobutanol. Efficiency of hydrolysis techniques tested to produce fermentable sugars depended on nature of agro-industrial wastes and process conditions. Acid-catalysed hydrolysis of BLW and BSG gave a total reducing sugar yield of 0.433 g/g and 0.468 g/g respectively. Reducing sugar yield from microwave assisted hydrothermal method was 0.404 g/g from APS and 0.631 g/g from APUS, and, 0.359 g/g from microwave assisted acid-catalysed SIW dry mass. Parameter optimization (time, pH and substrate concentration) for acid-catalysed BLW hydrolysate utilization using central composite model technique produced 307.9 g/kg glucose with generation of inhibitors (5-hydroxymethyl furfural (20 g/kg), furfural (1.6 g/kg), levulinic acid (9.3 g/kg) and total phenolic compound (0.567 g/kg)). 10.62 g/L of acetone-butanol-ethanol was produced by subsequent clostridial fermentation of the substrate. [ABSTRACT FROM AUTHOR]

Biochars were prepared from feedstocks pinewood and pig manure. Biochar microparticles obtained through grinding were evaluated for the removal of emerging contaminant diclofenac (DCF) and the underlying mechanism were thoroughly studied. Characterization of biochar was carried out using particle size analyzer, SEM, BET, FT-IR, XRD, XPS and zeta potential instrument. Pig manure biochar (BC-PM) exhibited excellent removal efficiency (99.6%) over pine wood biochar (BC-PW) at 500 µg L −1 of DCF (environmentally significant concentration). Intraparticle diffusion was found to be the major process facilitated the adsorption. BC-PW followed pseudo first-order kinetics whereas BC-PM followed pseudo second-order kinetics. Pine wood biochar was largely affected by pH variations whereas for pig manure biochar, pH effects were minimal owing to its surface functional groups and DCF hydrophobicity. Thermodynamics, presence of co-existing ions, initial adsorbate concentration and particles size played substantial role in adsorption. Various isotherms models were also studied and results are presented. [ABSTRACT FROM AUTHOR]

An efficient, rapid, ex-situ two phase partitioning detoxification has been developed to reduce inhibitor concentration in biomass hydrolysate and enhance biobutanol production from brewery liquid waste (BLW) and brewery spent grain (BSG). About 80 ± 2.0% extraction of furan derivatives and more than 95 ± 2.0% extraction of phenolic compounds and almost no extraction of reducing sugar from simulated synthetic media as well as real waste hydrolysate have made this method more interesting. Detoxification of brewery liquid waste and brewery spent grain hydrolysate by over liming and charcoal gave biobutanol production of 4.3 g/L, 6.3 g/L and 4.6 g/L, 5.8 g/L respectively. Ex-situ extraction of microbial inhibitors from brewery liquid waste and brewery spent grain hydrolysates using bis (2-ethylhexyl sebacate) as extractant gave biobutanol production of 8.0 g/L and 7.2 g/L respectively. Lower power consumption (0.081 W/L) and reuse of the extracting solvent made this detoxification technique extremely useful for improving production of biobutanol from agro-industrial waste. [ABSTRACT FROM AUTHOR]

Environmental considerations along with the technological challenges have led to search for green and energy-efficient processes for advanced nanostructured materials. In this study, nanobiochar was produced from pine wood biochar using a planetary ball mill. A central composite experimental design and response surface methodology was employed to optimize the ball milling parameters including time, rotational speed and ball to powder mass ratio to obtain nanoparticles in short time and at lower energy consumption. ANOVA results showed that the linear and quadratic effect estimates of time and the interaction effect of time and rotational speed were significant contributors to the size of particles during milling (p < 0.05). Based on the developed statistical model, the optimum conditions for obtaining the smallest particles, around 60 nm, were found to be 1.6 h, 575 rpm and 4.5 g/g. However, the size measurements indicated that particles had a great tendency to agglomerate. Further study showed that the conditioning of biochar at cryogenic temperatures prior to milling inhibits the agglomeration of nanoparticles which is essential in industrial processes. The adsorption test proved that the nanobiochar produced using green method is promising in the removal of micropollutants from aqueous media by removing up to 95% of carbamazepine from water. At the optimum milling parameters and conditioning for 24 h at −80 °C, nanobiochar with the average size of around 60 nm was obtained. The produced nanobiochar was characterized by Brunauer-Emmett-Teller (BET) gas porosimetry, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Also, physical and chemical properties, such as water holding capacity, organic matter, oxidation-reduction potential (ORP), elemental composition, polycyclic aromatic hydrocarbons (PAHs) and heavy metals were analyzed. [ABSTRACT FROM AUTHOR]

Lipase is one of the most widely used enzymes and plays an important role in biotechnological and industrial processes including food, paper, and oleochemical industries, as well as in pharmaceutical applications. However, its aqueous solubility and instability make its application relatively difficult and expensive. The immobilization technique is often used to improve lipase performance, and the strategy has turned out to be a promising method. Immobilized lipase on nanomaterials (NMs) has shown superiority to the free lipase, such as improved thermal and pH stability, longer stable time, and the capacity of being reused. However, immobilization of lipase on NMs also sometimes causes activity loss and protein loading is relatively lowered under some conditions. The overall performance of immobilized lipase on NMs is influenced by mechanisms of immobilization, type of NMs being used, and physicochemical features of the used NMs (such as particle size, aggregation behavior, NM dimension, and type of coupling/modifying agents being used). Based on the specific features of lipase and NMs, this review discusses the recent developments, some mechanisms, and influence of NMs on lipase immobilization and their activity. Multiple application potential of the immobilized lipases has also been considered. [ABSTRACT FROM AUTHOR]

A two and half year old female was admitted at the emergency room suffering from gradually worsening headache followed by nausea. The child presented with reduced level of consciousness and bilateral hypoacusis. The patient was lethargic. Ophthalmic examination showed branch retinal artery occlusion (BRAO). This finding was crucial to the diagnosis of Susac's syndrome (SS), a rare autoimmune disease characterized by, endotheliopathy of retina, encephalic tissues and cochlea. Magnetic resonance imaging of the brain also showed typical features. Thorough blood investigations did not reveal any other abnormality. Patient was treated with immunosuppressive to prevent her from developing severe sequelae of this disease. The child showed dramatic improvement in her systemic condition within 48 h of starting the treatment. This is the youngest ever and first case report from India. [ABSTRACT FROM AUTHOR]