Search

Diastolic dysfunction (DD) is increasingly common. However, its metabolic determinants are poorly known. This study aims to determine which metabolic and inflammatory features predict DD in initially healthy adults. We prospectively analyzed the association between metabolic features and DD in 728 initially healthy adults aged 30–60 from Eastern France enrolled in the STANISLAS population-based cohort. Clinical and biological cardiovascular features were collected at baseline (1994–1995). DD was assessed twenty years later (2011–2016) by echocardiography using current international guidelines. For replication purposes, 1463 subjects from the Malmo Preventive Project cohort were analyzed. In the STANISLAS cohort, 191 subjects (26.2%) developed DD. In age-sex-adjusted logistic models, significant predictors of DD were body mass index (BMI, odds ratio for 1-standard-deviation increase (OR) 1.28, 95% CI 1.08–1.52), waist circumference (WC, OR 1.48, 95% CI 1.18–1.84), waist-hip ratio (OR 1.53, 95% CI 1.16–2.02), systolic blood pressure (OR 1.19, 95% CI 1.00–1.43) and triglycerides (TG, OR 1.18, 95% CI 1.00–1.40). Subjects with elevated WC (> 80th percentile) and TG (> 50th percentile) had a twofold higher DD risk (age-sex-adjusted odds ratio 2.00, 95% CI 1.20–3.31, P = 0.008), whereas no such interplay was observed for BMI. In the Malmo cohort, BMI was similarly associated with DD; participants with both elevated BMI and TG were at higher DD risk (age-sex-adjusted odds ratio 1.61, 95% CI 1.18–2.20, P = 0.002). Subjects with elevated WC and TG may have a higher long-term DD risk. Prevention targeting visceral obesity may help reduce the incidence of DD.

Insight into the microstructure of lyotropic liquid crystals (LCs) is of crucial importance for development of novel dermal delivery systems. Our aim was to evaluate the phase behaviour of dermally applicable LCs composed of isopropyl myristate/Tween 80/lecithin/water, along the dilution line, where phase transitions are predominantly driven by increased water content. Additionally, identification of LC temperature dependence is of great importance for skin application. Selected LCs were evaluated using electron paramagnetic resonance (EPR) plus conventionally used methods of polarization microscopy, small-angle X-ray scattering, differential scanning calorimetry, and rheological measurements. Depending on water content, LCs formed diverse microstructures, from (pseudo)hexagonal (LC1) and lamellar (LC2-LC7) liquid crystalline phases that possibly co-exist with rod-like micelles (LC4-LC7), to a transitional micellar phase (LC8). Furthermore, the LCs microstructure remained unaltered within the tested temperature range. EPR was shown to detect microstructural transitions of LCs and to provide complementary data to other techniques. These data thus confirm the applicability of EPR as a complementary technique for better understanding of LC microstructural transitions that are expected to contribute greatly to studies oriented towards the drug release characteristics from such systems.

The objective of the present study was to investigate the effect of isopropyl myristate (IPM) on the in vitro permeation of testosterone through human cadaver skin from carbopol gels. Six testosterone gel formulations were prepared using different IPM contents of 0%, 0.4%, 0.7%, 1%, 2%, and 3%. The gels were characterized for drug permeation, matrix morphology, pH, kinetics of ethanol evaporation, and viscosity. Mass balance studies were performed to estimate testosterone distribution among the compartments of diffusion cells. All formulations exhibited pH values of 5.1 and viscosities of 1.25-1.75 Pa.s depending on IPM contents. Under occlusive condition, testosterone flux was found to increase significantly (p < 0.05) by increasing IPM content. Gels containing 2% IPM exhibited 11-fold increase in flux compared with formulation devoid of IPM. Ethanol was found to have a synergistic effect with IPM in enhancing testosterone flux. Mass balance analysis showed that testosterone was in a saturated state in the skin. Conducting permeation experiments under nonocclusive condition was nondiscriminating because of the evaporation of alcohol and consequent precipitation of drugs. Based on demonstrated effect of IPM on product performance, the final IPM concentration should be controlled with minimal variation during manufacturing and shelf life of drug product.

Isopropyl myristate (IPM) is a widely used penetration enhancer in pharmaceutical formulations, however, its mechanism of action on a molecular scale is still not completely understood. Previous work using a quaternary Stratum Corneum (SC) lipid model in bulk suggested the incorporation of isopropyl myristate into the SC lipid matrix, phase separation, and perturbation of the multilamellar lipid assembly. Here, we used 2D Langmuir monolayers of a ternary SC lipid model, containing ceramide AP C18:18, stearic acid and cholesterol in a molar ratio of [1:1:0.7], respectively, to shed light on the mechanism of action of this important lipophilic penetration enhancer. To do so, the synthesis of chain deuterated isopropyl myristate was successfully performed in order to study the different coupling possibilities between the hydrogenated and deuterated IPM and the alkyl chains of the SC molecules. Our results indicate that only a small portion of IPM is able to mix with our SC model leading to a limited fluidizing effect (small increase of the wavenumber of CH2 stretching vibration, increase of the SC layer flexibility), but will be squeezed out at higher lateral pressures. Furthermore, the deuteration of IPM enhances the miscibility with this SC model, probably due to a different coupling between the alkyl chains or the alkyl and deuterated chains. Additionally, using the pure D-form of CER[AP] in the SC model amplifies the obtained results.

Objective This study investigates the effectiveness of self-nanoemulsifying drug delivery system (SNEDDS) in improving voriconazole transcorneal permeability. Methods Voriconazole-SNEDDS was prepared with isopropyl myristate, PEG 400, Tween 80® and Span 80® and was subjected for physicochemical characterization after reconstitution with NaCl 0.9% (1/9; v/v). In-vitro antifungal activity was assessed and compared with the marketed formulation. In-vivo studies, namely ocular irritation test via modified Draize test and pharmacokinetic study, were investigated using rabbit as animal model. Key findings Voriconazole-SNEDDS presented a droplet size of 21.353 ± 0.065 nm, a polydispersity index of 0.123 ± 0.003, a pH of 7.205 ± 0.006 and an osmolarity of 342.667 ± 2.517 mOsmol/l after reconstitution with NaCl 0.9%. Voriconazole-SNEDDS minimum inhibitory concentration (MIC90) was similar to the one of marketed formulation for Candida species while it was significantly lower (P < 0.001) for Aspergillus fumigatus. Draize test revealed that Voriconazole-SNEDDS was safe for ocular administration. Voriconazole maximum concentration (5.577 ± 0.852 µg/ml) from SNEDDS was higher than marketed formulation (Cmax = 4.307 ± 0.623 µg/ml), and the Tmax was delayed to 2 h. The area under the concentration–time curve value of Voriconazole-SNEDDS was improved by 2.419-fold. Conclusion Our results suggest that SNEDDS is a promising carrier for voriconazole ocular delivery and this encourages further clinical studies.

Objective Geraniol, a fragrance of great importance in the consumer goods industry, can be glucosylated by the UDP-glucose-dependent glucosyltransferase VvGT14a from Vitis vinifera, yielding more stable geranyl glucoside. Escherichia coli expressing VvGT14a is a convenient whole-cell biocatalyst for this biotransformation due to its intrinsic capability for UDP-glucose regeneration. The low water solubility and high cytotoxicity of geraniol can be overcome in a biphasic system where the non-aqueous phase functions as an in situ substrate reservoir. However, the effect of different process variables on the biphasic whole-cell biotransformation is unknown. Thus, the goal of this study was to identify potential bottlenecks during biotransformation with in situ geraniol supply via isopropyl myristate as second non-aqueous phase. Results First, insufficient UDP-glucose supply could be ruled out by measurement of intracellular UDP-glucose concentrations. Instead, oxygen supply was determined as a bottleneck. Moreover, the formation of the byproduct geranyl acetate by chloramphenicol acetyltransferase (CAT) was identified as a constraint for high product yields. The use of a CAT-deficient whole-cell biocatalyst prevented the formation of geranyl acetate, and geranyl glucoside could be obtained with 100% selectivity during a biotransformation on L-scale. Conclusion This study is the first to closely analyze the whole-cell biotransformation of geraniol with Escherichia coli expressing an UDP-glucose-dependent glucosyltransferase and can be used as an optimal starting point for the design of other glycosylation processes.

Zingeber officinale (ginger) has been used for a long time in conventional medicine for the management of many diseases most important of which is inflammatory diseases. The aim of this study was formulation of topical microemulsion system to enhance the solubility, stability and release profile of ginger extract, as it is unstable in the presence of light, air, heat and long term storage. The solubility of ginger extract in different oils, surfactants, and cosurfactants was determined in order to find the optimal components for microemulsion. Isopropyl myristate (IPM) was selected as oil phase, tween 80 and PEG 400 were selected as surfactant and co-surfactant respectively based on highest solubility values. Pseudo-ternary phase diagram was constructed in order to find out the microemulsion region. The prepared microemulsions were evaluated for pH, viscosity, conductivity, refractive index, globular size, zeta potential, polydispersity index, ginger extract content, in-vitro and ex-vivo release profiles. The formulation GE1 showed best physicochemical properties with smallest globular size (19.75nm), highest release rate and flux value. It also showed significant (p0.05) anti-inflammatory effect as compared to reference piroxicam drug solution. It is concluded that ginger extract can be used to develop stable microemulsion system with better skin permeation and promising antiinflammatory activity.

Lycopene, the active component of Lycopersicon esculentum species, has been reported for the protecting capabilities against ultra-violet induced skin pigmentation, antioxygen and antityrosinase activities. In the present study, extract of tomato fruit was obtained from the Lycopersicon esculentum plant using solvent system comprised of hexaneethanol-acetone. The phyto chemical active constituent lycopene was then identified by spectrophotometric technique at 470nm. Micro emulsions were developed containing different ratio of water, isopropyl myristate (oil), tween 80 and propylene glycol as surfactant and co-surfactant respectively via pseudoternary phase diagram. Various physicochemical tests were performed including globular size, conductivity, viscosity, scanning electron microscopy (SEM), refractive index (RI) and pH measurement for the formulation characterization. Results of physical and chemical stability studies showed that the micro emulsion with proportion of surfactant: co-surfactant of 2:1 (Smix) was found to be optimized formulation and with enhanced stability. Therefore, concluded that the stability of the micro emulsion was dependent on the proportions of surfactant co-surfactant, water and oil in the preparation.

Collagen and hyaluronic acid (HA) are biopolymers that affect the appearance and condition of the skin. Delivery of these compounds into the skin is highly challenging since have a number of disadvantageous properties, such as high molecular weight and hydrophilicity. Here, we evaluated the transdermal penetration of low and high molecular weight collagen and HA from microemulsions. A number of microemulsion formulations, differing in the content of polymers and surfactants (i.e. penetration promoters), were used for the permeation study. In addition, a correlation was made between the composition of these microemulsions and the polymers transport efficiency. The results indicate that, microemulsions enable transdermal permeation of collagen and HA. The concentration of polymers and the solubilization capacity of microemulsions had the greatest influence on the permeation. Surprisingly, the molecular weight of polymers and the content of other components affected the size of microemulsion particles, and thus these parameters had an indirect influence on the permeation process. This study demonstrated therefore the potential therapeutic use of microemulsion with collagen and HA in improving and regenerating the barrier of aged or diseased skin.

Current study focuses on the formulation and characterization of lipophilic and hydrophilic gel formulations of nifedipine to treat anal fissure via anodermal application.Lipophilic gels were prepared with Aerosil grades as gelling agents in bulk oils. Polyethylene glycols, hydroxypropyl methylcellulose, and Carbopol® 974P were used as gelling agents in water and propylene glycol for forming hydrophilic gels. The effect of repeated Freeze-Thaw Cycles (FT-C) on microstructures of the gels was investigated by examining viscosity, rheology and textural properties. Aerosil 200 containing lipophilic gels exhibited thixotropic behavior with plastic flow properties and higher viscosities.Accordingly, their compressibility and adhesiveness increased. FT-C caused notable changes in microstructures and textural properties of the lipophilic gels excluding the formulation containing Aerosil 200-in-isopropyl myristate. Among the hydrophilic gels, the viscosity of Carbopol® 974P gels increased depending on the amount of polymer, triethanolamine and water; these gels featured plastic flow without thixotropic behavior. Their compressibility and adhesiveness were higher than other gel formulations with stable post-FT-C characteristics. The higher flux values of nifedipine were observed from water containing Carbopol® 974P gel.The results of the stability tests showed that the Carbopol® 974P gel had a longer shelf life than the Aerosil 200-in-isopropyl myristate gel.

The Skin Parallel Artificial Membrane Permeability Assay (PAMPA) is a 96-well plate–based skin model with an artificial membrane containing free fatty acid, cholesterol, and synthetic ceramide analogs to mimic the stratum corneum (SC) barrier. The current study evaluates the compatibility of lipophilic solvents/penetration enhancer, topical emulsions containing different emulsifier systems, and organic acceptor media additives with the artificial membrane of the assay. Additionally, different assay setups (standard setup: donor in bottom plate versus modified setup: donor in top plate) were compared. Methylparaben (MP), ethylparaben (EP), and propylparaben (PP) were used as model permeants and internal standards for proper assay execution. The permeation order of the parabens (MP > EP > PP) remained the same with different lipophilic solvents, and the ranking of lipophilic solvents was comparable under standard and modified conditions (isopropyl myristate, IPM > dimethyl isosorbide, DMI ≥ propylene glycol, PG > diisopropyl adipate, DIPA). Pre-incubation of the Skin PAMPA plates with IPM, DIPA, and DMI, as well as with formulations that contain non-ionic emulsifiers, and acceptor solutions containing DMSO or EtOH (≤ 50%) for 4 h did not increase the percentage of permeated parabens in the main experiment, suggesting that those compounds do not make the artificial membrane more permeable. High-resolution mass spectrometry confirmed that acceptor solutions with ≤ 50% DMSO or EtOH do not extract stearic acid, cholesterol, and certramides at standard assay conditions. Hence, if certain constraints are considered, the Skin PAMPA model can be used as a pre-screening tool for topical formulation selection.

Hair lotion containing methyl myristate loaded in cationic niosomes (HL-MMnio) composed of Brij72/cholesterol/DDAB at 7:3:0.65 molar ratio was developed. The remaining percentages of MM loaded in cationic niosomes in hair lotion were higher than free MM in hair lotion of about 1.2 times. The cumulative amounts in porcine skin and the receiver compartment of MM loaded in cationic niosomes incorporated in hair lotion were higher than those of free MM in hair lotion of 1.45 and 1.32 times, respectively. HL-MMnio showed very slightly irritation on rabbit skin, which was disappeared after 4 d. For melanogenesis induction in C57BL/6 mice with aged-induced grey body coat hairs, the highest pigmentation scores of HL-MMnio applied on the dorsal area were observed after 21 days, while hair lotion containing the free MM indicated after 35 days. This study has suggested that HL-MMnio was the high potential formulation for canities treatment.

Herein, a nanoemulsion-based organogel (NEOG) system loaded with acyclovir has been developed for the effective treatment of herpes simplex virus infection via topical delivery. Pseudo-ternary phase diagram exhibited increase in non-birefrigent, optically isotropic region of organogel with Smix (Kw) ratio. The NEOG C showed good storage (G') and loss moduli (G″), and more compact network structures. Gel-sol transition temperature (Tg) and fractal dimension (Df) of NEOG system revealed increased density of the tubular network with Kw. Hence, high gelling ability of the developed NEOG system may attribute to the combination of sustained and site-specific delivery of drugs.

IntroductionRheumatic heart disease causes substantial morbidity in children in low-income countries. School-based echocardiographic screening has been suggested as a means to identify children with latent disease; however, little is known about the experience of children and teachers participating in screenings. The aim of our study was to assess students’ and teachers’ experience of school-based echocardiographic screening and identify areas for improvement.Materials and methodsA school-based echocardiographic screening programme was conducted in five schools in Northern Uganda in 2013. After 8 months, an age- and gender-stratified population that included 5% of the participating students and teachers completed a questionnaire via an in-person interview. Responses were reviewed by question and coded to identify key themes.ResultsA total of 255 students (mean 10.7 years; 48% male) and 35 teachers participated in our study. In total, 95% of the students and 100% of the teachers were happy to have participated in the screening; however, students reported feeling scared (35%) and nervous (48%) during the screening process. Programmatic strengths included the following: knowing one’s health status, opportunity to receive treatment, and staff interactions. Although 43% of the patients did not suggest a change with open-ended questioning, concerns regarding privacy, fear of the screening process, and a desire to include others in the community were noted.DiscussionSchool-based echocardiographic rheumatic heart disease screening was well received by students and teachers. Future programmes would likely benefit from improved pre-screening education regarding the screening process and diagnosis of rheumatic heart disease. Furthermore, education of teachers and students could improve screening perception and establish realistic expectations regarding the scope of screening.

Moxifloxacin (MXN) is widely prescribed for the treatment of bacterial keratitis. The conventional MXN solution has several limitations, including short precorneal residence time and poor intrastromal bioavailability, requiring frequent instillation of the drug to achieve the desired therapeutic effect. To circumvent this problem, the W/O (water-in-oil) microemulsion (ME) system was utilized for sustained release and improved precorneal retention.The pseudo-ternary phase diagrams were developed and various MEs were prepared using two non-ionic surfactants, Tween 80 and Span 20, with isopropyl myristate and acetate buffer. Physicochemical parameters, in vitro drug release and in vitro antibacterial activity were studied. The in vivo antimicrobial efficacy of optimized microemulsion (ME 10) was studied in an experiment on bacterial keratitis in rabbit eyes and compared with that of the marketed eye drops.The optimized microemulsion (ME 10) displays as an average globule size of40 nm. The developed MEs showed acceptable physico-chemical behaviour, good stability for 3 months and exhibited sustained drug release. Greater efficacy in experimental bacterial keratitis in rabbit eyes was also observed in comparison with marketed drug solution.The developed MEs are a viable alternative to conventional eye drops, because of its ability to enhance bioavailability through its longer precorneal residence time and its ability to sustain the release of the drug.

The triterpene esters ᴪ taraxasterol-3-O-myristate (1) and arnidiol-3-O-myristate (2) were tested for their ability to protect epithelial intestinal barrier in an in vitro model. Their effects on ROS production and on trans-epithelial resistance were investigated on CaCo-2 cell monolayers both in basal and stress-induced conditions. Both compounds were able to modulate the stress damage induced by H2O2 and INFγ+TNFα, showing a potential use as model compounds for the study of new therapeutic agents for intestinal inflammations.

In the present study, pluronic lecithin organogel (PLO) of diltiazem hydrochloride (DZH) was developed by taking different ratios of organic phase to aqueous phase (1:3, 1:4, and 1:5) with varying concentration of soya lecithin (20, 30, and 40 % w/w) in organic phase (isopropyl myristate, IPM) and pluronic (20, 25, and 30 % w/w) in aqueous phase, respectively, and characterized for in vitro parameters and ex vivo permeation study. The results of in vitro parameters were found to be within permissible limit and all the PLOs were physically stable at refrigeration and ambient temperature. The influence of phase ratio and different concentrations of soya lecithin on DZH release from the PLOs was found to be significant (p

We evaluated testosterone-containing lecithin reverse wormlike micelles (reverse worms) composed of a polar substance/lecithin/isopropyl myristate for transdermal application. Water, D-ribose, or tetraglycerol were used as the polar substance and were key ingredients for forming the reverse worms. Using the reverse worms, 1 wt% of testosterone could be stably solubilized. When using D-ribose as polar substance, the maximum zero-shear viscosity of the reverse worms solution was higher than that of systems using water or tetraglycerol as the polar substance. The mechanism of skin permeation of testosterone from reverse worms solution was elucidated using skin permeation experiments with hairless mouse skin. When the structure of the reverse worms transitioned to lamellar liquid crystals at the skin/formulation interface, testosterone became supersaturated in the formulations. The structural transition occurred in systems using water or D-ribose as the polar substance, increasing the flux of testosterone. The flux of testosterone from reverse worms solution thus depends on the type of polar substance used.

The aim of this study was to develop novel microemulsions (MEs) for the transdermal delivery of capsaicin. Microemulsion-based nonionic surfactants consisting of isopropyl myristate as the oil phase, various nonionic surfactants as the surfactant (S), various glycols or alcohol as the co-surfactant (CoS), and reverse osmosis water as the aqueous phase were formulated. Based on the optimal ME obtained from Design Expert, MEs containing a fixed concentration of oil, water or surfactant were prepared while varying the amounts of the other two fractions. The results indicated that the skin permeation flux of low dose capsaicin (0.15% (w/w)) was significantly higher for the selected ME than the commercial product and capsaicin in ethanol (control) by approximately two- and four-fold, respectively. We successfully demonstrated the feasibility of the transdermal delivery of capsaicin-loaded ME using a low concentration of nonionic surfactant and ethanol. Moreover, the optimization using computer program helped to simplify the development of a pharmaceutical product.

Antarctic krill oil is high in nutritional value and has biological functions like anti-inflammation and hypolipidemic effects. But it has and unpleasant smell, and unsaturated fatty acids are prone to oxidative deterioration. Its high viscosity and low solubility in water make it difficult for processing. Microemulsion can be a new promising route for development of krill oil product. We determined a formula of krill oil-in-water microemulsion with krill oil: isopropyl myristate = 1:3 as oil phase, Tween 80:Span 80 = 8:2 as surfactant, ethanol as co-surfactant and the mass ratio of surfactant to co-surfactant of 3:1. After screening the formula, we researched several characteristics of the prepared oil-in-water microemulsion, including electrical conductivity, microstructure by transmission electron microscope and cryogenic transmission electron microscope, droplet size analysis, rheological properties, thermal behavior by differential scanning calorimeter and stability against pH, salinity, and storage time.

Transdermal delivery of drugs is more challenging for drugs that are insoluble or sparingly soluble in water and most organic solvents. To overcome this problem, ionic liquid (IL)-mediated ternary systems have been suggested as potential drug carriers. Here, we report potent ternary (IL-EtOH-IPM) systems consisting of biocompatible ILs, ethanol (EtOH), and isopropyl myristate (IPM) that can dissolve a significant amount of the sparingly soluble drug acyclovir (ACV). The ternary systems were optically transparent and thermodynamically stable with a wide range of IL pertinence. An in vitro drug permeation study showed that the ILs in the ternary systems dramatically enhanced ACV permeation into and across the skin. Fourier Transform Infrared spectroscopy of the stratum corneum (sc) after treatment with ternary systems showed that the skin barrier function was reduced by disturbance of the regularly ordered arrangement of corneocytes and modification of the surface properties of the sc during permeation. Histological analysis, and skin irritation studies using a reconstructed human epidermis model showed the safety profile of the ternary system, and there were no significant changes in the structures of the sc, epidermis, and dermis. Therefore, ternary systems containing biocompatible ILs are promising for transdermal delivery of insoluble or sparingly soluble drugs.

Background: Tizanidine hydrochloride acts centrally as a muscle relaxant. It is used for the treatment of painful muscle spasm, spasticity associated with multiple sclerosis or spinal cord injury and treatment of muscle spasticity in spinal cord disease. Tizanidine hydrochloride belongs to BCS class II. It has low oral bioavailability and short halflife. Incorporating this drug in microemulgel is an excellent way to overcome problems associated with the drug. Objective: Present research work was aimed to develop and optimize a microemulsion based gel system for tizanidine hydrochloride. Methods: Screening of oil, surfactant and co-surfactant was carried out. Ternary phase diagram was constructed to obtain concentration range of components. The prepared microemulsion was evaluated for pH, globule size, zeta potential, conductivity, density and viscosity. 32 level factorial design was applied to study the effect of concentration of carbopol 934 and HPMC K15M on % cumulative drug release and viscosity of microemulgel using software Design Expert. Microemulgel was evaluated for pH, spreadability, viscosity, syneresis, drug content, bioadhesive strength, in-vitro as well as ex-vivo diffusion study. Results: Microemulsion was prepared by using isopropyl myristate as oil, tween 80 as a surfactant and transcutol P as cosurfactant. Largest transparent microemulsion region was found with Smix ratio of 1:1. FE-SEM showed globule size 28μm for batch B1 and zeta potential was -1.27mV indicating good stability of the microemulsion. Optimised batch was F6 which showed 92% drug release within 8 hours. It followed the Korsmeyer-Peppas model. Conclusion: A stable, effective and elegant microemulgel formulation, exhibiting good in-vitro and ex-vivo drug release was formulated.

A novel biocompatible water-in-oil microemulsion was developed using nonionic surfactants and was investigated as a potential enzyme delivery system for pharmaceutical applications. The system was composed of isopropyl myristate/polysorbate 80 (Tween 80)/distilled monoglycerides/water/propylene glycol (PG), had a low total surfactant concentration (8.3% w/w), and was able to incorporate approximately 3% w/w aqueous phase containing horseradish peroxidase (HRP). Structural and activity aspects of the system were studied using a variety of techniques such as dynamic light scattering (DLS), electron paramagnetic resonance (EPR), and dynamic interfacial tension. The apparent hydrodynamic diameter of the empty droplets was calculated at about 37 nm. Different enzyme concentrations, ranging from 0.01 to 1.39 μM, were used for both DLS and EPR studies to effectively determine the localization of the macromolecule in the microemulsion. According to the results, for high enzyme concentrations, a participation of HRP in the surfactant monolayer of the microemulsion is evident. The number of reverse micelles in the microemulsion was defined by a theoretical model and was used to clarify how the enzyme concentration affects the number of empty and loaded reverse micelles. To assure that the system allows the enzyme to retain its catalytic activity, an oxidative reaction catalyzed by HRP was successfully carried out with the use of the model substrate 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonic acid]. The influence of several parameters such as temperature, pH, and PG concentration was examined to optimize the reaction conditions, and a kinetic study was conducted revealing an ordered-Bi-Bi mechanism. Values of all kinetic parameters were determined. The release of the encapsulated enzyme was studied using an adequate receiver phase, revealing the effectiveness of the proposed microemulsion not only as a microreactor but also as a carrier for therapeutic biomolecules.

Dibucaine (DBC) is one of the most potent long-acting local anesthetics, but it also has significant toxic side effects and low water solubility. Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) have been proposed as drug-delivery systems to increase the bioavailability of local anesthetics. The purpose of the present study was to characterize SLNs and NLCs composed of cetyl palmitate or myristyl myristate, a mixture of capric and caprylic acids (for NLCs only) plus Pluronic F68 prepared for the encapsulation of DBC. We intended to provide a careful structural characterization of the nanoparticles to identify the relevant architectural parameters that lead to the desirable biological response. Initially, SLNs and NLCs were assessed in terms of their size distribution, morphology, surface charge, and drug loading. Spectroscopic techniques (infrared spectroscopy and electron paramagnetic resonance, EPR) plus small-angle X-ray scattering (SAXS) provided information on the interactions between nanoparticle components and their structural organization. The sizes of nanoparticles were in the 180 nm range with low polydispersity and negative zeta values (-25 to -46 mV). The partition coefficient of DBC between nanoparticles and water at pH 8.2 was very high (>104). EPR (with doxyl-stearate spin labels) data revealed the existence of lamellar arrangements inside the lipid nanoparticles, which was also confirmed by SAXS experiments. Moreover, the addition of DBC increased the molecular packing of both SLN and NLC lipids, indicative of DBC insertion between the lipids, in the milieu assessed by spin labels. Such structural information brings insights into understanding the molecular organization of these versatile drug-delivery systems which have already demonstrated their potential for therapeutic applications in pain control.

The present study is undertaken to assess any possible association between obesity and periodontal diseases among Saudi women in Asir region.A total number of 100 obese subjects in the age group between 16 and 35 years participated in the study. A questionnaire which consisted of anthropometric measurements [neck circumference (NC) ≥ 34 cm for women] and demographic features was used. Periodontal status was assessed for the subjects.The periodontal disease shows significant association with anthropometric measurements (NC ≥ 34 cm for women) and demographic features.The findings of this prospective study showed possible relationship between obesity and periodontal disease.In view of changing lifestyle with dietary habits, there is a possibility of developing obesity. The results in this research show a direct relationship between obesity and periodontal diseases by measuring body mass index (BMI) and NC in the age group of 16 to 35 years females in Saudi Arabia. Thus, it helps in preventing and managing obesity, especially among youth.

Fatty acid esters of glycosides and glucopyranosiduronides were regioselectively synthesized with tin-mediated method using dibutyltin dimethoxide as the stannylating agent, these novel esters were investigated for their antibacterial activities against bacterial Staphylococcus Aureus and Salmonella Agona, the essential structural feature as antibacterial agents was probed. Antimicrobial tests showed that some laurates of trans-ol glycosides are effective inhibitors against S. Aureus, while some laurates and myristates of cis-ol glycosides are moderate inhibitors against both S. Aureus and S. Agona. Studies on antimicrobial structure-activity relationship of sugar fatty acid esters showed that both the carbohydrate moiety and the length of fatty acid played a vital role on the antibacterial effect.

Ralstonia solanacearum, a plant pathogenic bacterium causing "bacterial wilt" on crops, uses a quorum sensing (QS) system consisting of phc regulatory elements to control its virulence. Methyl 3-hydroxypalmitate (3-OH PAME) was previously identified as the QS signal in strain AW1. However, 3-OH PAME has not been reportedly detected from any other strains, and this suggests that they produce another unknown QS signal. Here we identify (R)-methyl 3-hydroxymyristate [(R)-3-OH MAME] as a new QS signal that regulates the production of virulence factors and secondary metabolites. (R)-3-OH MAME was synthesized by the methyltransferase PhcB and sensed by the histidine kinase PhcS. The phylogenetic trees of these proteins from R. solanacearum strains were divided into two groups, according to their QS signal types--(R)-3-OH MAME or (R)-3-OH PAME. These results demonstrate that (R)-3-OH MAME is another crucial QS signal and highlight the unique evolution of QS systems in R. solanacearum.

The synthesis of a new class of cationic lipids, tris(2-aminoethyl)amine-based α-branched fatty acid amides, is described resulting in a series of lipids with specific variations in the lipophilic as well as the hydrophilic part of the lipids. In-vitro structure/transfection relationships were established by application of complexes of these lipids with plasmid DNA (pDNA) to different cell lines. The α-branched fatty acid amide bearing two tetradecyl chains and two lysine molecules (T14diLys) in mixture with the co-lipid 1,2-di-[(9Z)-octadec-9-enoyl]-sn-glycero-3-phosphoethanolamine (DOPE) (1/2, n/n) exhibits effective pDNA transfer in three different cell lines, namely Hep-G2, A549, and COS-7. The presence of 10% serum during lipoplex incubation of the cells did not affect the transfection efficiency. Based on that, detailed investigations of the complexation of pDNA with the lipid formulation T14diLys/DOPE 1/2 (n/n) were carried out with respect to particle size and charge using dynamic light scattering (DLS), ζ-potential measurements, and transmission electron microscopy (TEM). Additionally, the lipoplex uptake was investigated by confocal laser scanning microscopy (CLSM). Overall, lipoplexes prepared from T14diLys/DOPE 1/2 (n/n) offer large potential as lipid-based polynucleotide carriers and further justify advanced examinations.

Extracellular vesicle (EV) shedding from ciliated cells is an evolutionarily conserved phenomenon. Caenorhabditis elegans is an excellent in vivo model with which to address fundamental questions regarding the biology of ciliary EVs. The myristoylated protein CIL-7 regulates EV biogenesis, and the myristoylation motif is essential for EV cargo association and function., The cilium both releases and binds to extracellular vesicles (EVs). EVs may be used by cells as a form of intercellular communication and mediate a broad range of physiological and pathological processes. The mammalian polycystins (PCs) localize to cilia, as well as to urinary EVs released from renal epithelial cells. PC ciliary trafficking defects may be an underlying cause of autosomal dominant polycystic kidney disease (PKD), and ciliary–EV interactions have been proposed to play a central role in the biology of PKD. In Caenorhabditis elegans and mammals, PC1 and PC2 act in the same genetic pathway, act in a sensory capacity, localize to cilia, and are contained in secreted EVs, suggesting ancient conservation. However, the relationship between cilia and EVs and the mechanisms generating PC-containing EVs remain an enigma. In a forward genetic screen for regulators of C. elegans PKD-2 ciliary localization, we identified CIL-7, a myristoylated protein that regulates EV biogenesis. Loss of CIL-7 results in male mating behavioral defects, excessive accumulation of EVs in the lumen of the cephalic sensory organ, and failure to release PKD-2::GFP-containing EVs to the environment. Fatty acylation, such as myristoylation and palmitoylation, targets proteins to cilia and flagella. The CIL-7 myristoylation motif is essential for CIL-7 function and for targeting CIL-7 to EVs. C. elegans is a powerful model with which to study ciliary EV biogenesis in vivo and identify cis-targeting motifs such as myristoylation that are necessary for EV–cargo association and function.

Fusafungine, a mixture of the cyclic hexadepsipeptides enniatins, is currently on the market for the treatment of upper respiratory tract diseases because of its bacteriostatic and anti-inflammatory effects. In this study, a quality-by-design risk assessment was performed with two objectives: (i) investigate whether enniatins are able to permeate the mucosa and reach blood circulation, as the summary of product characteristics indicates this is not the case, and if so, to quantify their transmucosal kinetics and (ii) study the influence of excipient concentration variability on mucosal permeation. First, the concentration of the two main excipients isopropyl myristate and ethanol, known penetration enhancers, in several marketed samples was determined using GC-FID. Then, the transmucosal kinetics of the enniatins were quantitatively evaluated for different dose solutions, using porcine buccal mucosa in an ex-vivo in-vitro Franz diffusion cell set-up, with UHPLC-MS/MS bioanalytics. This study demonstrated that enniatins are capable of permeating the mucosa. However, no risk of a significant different transmucosal permeability with varying excipient concentrations was detected.

The novel whole-cell biocatalyst Candida antarctica lipase B displaying- Pichia pastoris (Pp-CALB) is characterized by its low preparation cost and could be an alternative to the commercial immobilized Candida antarctica lipase B (CALB). This study addresses the feasibility of using Pp-CALB in large scale glucose fatty acid esters production. 1,2-O-Isopropylidene-α- d -glucofuranose (IpGlc) was used as the acyl acceptor to overcome the low solubility of glucose in an organic solvent and to avoid the addition of toxic co-solvents. IpGlc significantly improved the Pp-CALB catalyzing esterification efficiency when using long chain fatty acids as the acyl donor. Under the preferred operating conditions (50 °C, 40 g/L molecular sieve dosage and 200 rpm mixing intensity), 60.5% of IpGlc converted to 6-O-myristate-1, 2-O-isopropylidene-α- d -glucofuranose (C14-IpGlc) after a 96-h reaction in a 2-L stirred reactor. In a 5-L pilot scale test, Pp-CALB also showed a similar substrate conversion rate of 55.4% and excellent operational stability. After C14-IpGlc was collected, 70% trifluoroacetic acid was adopted to hydrolyze C14-IpGlc to myristate glucose ester (C14-Glc) with a high yield of 95.3%. In conclusion, Pp-CALB is a powerful biocatalyst available for industrial synthesis, and this study describes an applicable and economical process for the large scale production of myristate glucose ester.

Acetyl hexapeptide-8 (AH-8) is a well-known component of anti-aging products and was recently explored as a promising topical treatment of blepharospasm. Although AH-8 appears in a variety of cosmetic products, its skin penetration is sparsely studied and controversially discussed. Therefore, the aim of the present study was to investigate the influence of the vehicle type on the AH-8 delivery to the skin. Besides skin permeation experiments with Franz type diffusion cells, the spatial distribution of AH-8 in the stratum corneum after a real in-use application was investigated by in vitro tape stripping on porcine ear skin. By applying LC-MS/MS for quantification of AH-8, we demonstrated that a multiple water-in-oil-in-water (W/O/W) emulsion can significantly increase penetration of AH-8 into porcine skin compared to simple O/W and W/O emulsions. The internal structure of the developed multiple emulsion was confirmed by electron microscopic investigations and NMR self diffusion studies. In general, a clear superiority of water-rich W/O/W and O/W emulsions over an oil-rich W/O emulsion in terms of dermal delivery of AH-8 was found. This enhanced delivery of AH-8 could be explained by an increased absorption of the water-rich emulsions into the skin, confirmed by combined ATR-FTIR and tape stripping experiments.

The eosinophilia-myalgia syndrome (EMS) outbreak that occurred in the USA and elsewhere in 1989 was caused by the ingestion of Showa Denko K.K. (SD) L-tryptophan (L-Trp). “Six compounds” detected in the L-Trp were reported as case-associated contaminants. Recently the final and most statistically significant contaminant, “Peak AAA” was structurally characterized. The “compound” was actually shown to be two structural isomers resulting from condensation reactions of L-Trp with fatty acids derived from the bacterial cell membrane. They were identified as the indole C-2 anteiso (AAA1-343) and linear (AAA2-343) aliphatic chain isomers. Based on those findings, we utilized a combination of on-line HPLC-electrospray ionization mass spectrometry (LC–MS), as well as both precursor and product ion tandem mass spectrometry (MS/MS) to facilitate identification of a homologous family of condensation products related to AAA1-343 and AAA2-343. We structurally characterized eight new AAA1-XXX/AAA2-XXX contaminants, where XXX represents the integer molecular ions of all the related homologs, differing by aliphatic chain length and isomer configuration. The contaminants were derived from the following fatty acids of the bacterial cell membrane, 5-methylheptanoic acid (anteiso-C8:0) for AAA1-315; n-octanoic acid (n-C8:0) for AAA2-315; 6-methyloctanoic acid (anteiso-C9:0) for AAA1-329; n-nonanoic acid (n-C9:0) for AAA2-329; 10-methyldodecanoic acid (anteiso-C13:0) for AAA1-385; n-tridecanoic acid (n-C13:0) for AAA2-385; 11-methyltridecanoic acid (anteiso-C14:0) for AAA1-399; and n-tetradecanoic acid (n-C14:0) for AAA2-399. The concentration levels for these contaminants were estimated to be 0.1–7.9 μg / 500 mg of an individual SD L-Trp tablet or capsule The structural similarity of these homologs to case-related contaminants of Spanish Toxic Oil Syndrome (TOS) is discussed.

International audience; The efficiency of four modeling approaches, namely group contributions, corresponding-states principle, σ-moment-based neural networks, and graph machines, are compared for the estimation of the surface tension (ST) of 269 pure liquid compounds at 25 °C from their molecular structure. This study focuses on liquids containing only carbon, oxygen, hydrogen or silicon atoms since our purpose is to predict the surface tension of cosmetic oils. Neural network estimations are performed from σ-moment descriptors as defined in the COSMO-RS model, while methods based on group contributions, corresponding-states principle and graph machines use 2D molecular information (SMILES codes). The graph machine approach provides the best results, estimating the surface tensions of 23 cosmetic oils, such as hemisqualane, isopropyl myristate or decamethylcyclopentasiloxane (D5), with accuracy better than 1 mN.m–1. A demonstration of the graph machine model using the recent Docker technology is available for download in the Supplementary Information.

Dermal delivery of hydrophobic drugs by microemulsion (ME) formulations and effect from ME microstructures were studied. Anti-fungal drug, clotrimazole (CLOT), was used as the model compound. ME formulations possessing different microstructures were prepared using a ME system that contains isopropyl myristate as oil, Labrasol and Cremophor EL as surfactant and co-surfactant, and water. Permeation experiments on human cadaver skin were conducted for ME and the control formulations of different CLOT concentrations. Dermal delivery of CLOT assessed by the dermal tissue drug concentration was found to be significantly higher for MEs when compared with the control formulation, evidenced by dermal retention Enhancement Ratio (ERD) of 5.1, 2.8, and 3.0 for tested O/W, bi-continuous, and W/O MEs, respectively. The highest concentration was observed with O/W ME, suggesting the ME microstructure is an important formulation variable for enhancing dermal delivery efficiency. ME gel formulations prepared by incorporating 1.0%(w/w) of Carbopol980 showed comparable dermal CLOT concentration to MEs, but up to 2.4 fold higher than the commercial CLOT cream product, Lotrimin®. Furthermore, Fluorescein Isothiocynate (FITC), used as a model compound for highly hydrophobic drugs, was also studied for dermal delivery by MEs, and results show consistent ME microstructure effect, suggested by significantly higher FITC concentrations in all skin layers, SC, viable epidermis, and dermis, from O/W ME over bi-continuous and W/O MEs.

Geranyl glucoside, the glucosylated, high-value derivative of the monoterpenoid geraniol, has various applications in the flavor and fragrance industry and can be produced through whole-cell biotransformation of geraniol with Escherichia coli whole-cell biocatalysts expressing the glucosyltransferase VvGT14a. However, the low water solubility and high cytotoxicity of geraniol require the design of a proper biphasic system where the second, non-aqueous phase functions as an in-situ substrate reservoir. In this work, a rational selection strategy was applied for choosing suitable sequestering phases for geranyl glucoside production by whole-cell biotransformation of geraniol. Hansen solubility parameters and octanol/water distribution coefficients were used as first principle methods in combination with extensive database research to preselect 12 liquid and 6 solid sequestering phases. Subsequently, experimental approaches were applied to determine physicochemical characteristics and the distribution of geraniol and geranyl glucoside between the phases. Moreover, the effects of the sequestering phases on the whole-cell biocatalysts and on the produced geranyl glucoside concentration were measured during parallel biotransformations in milliliter-scale stirred-tank bioreactors. The fatty acid ester isopropyl myristate emerged as the best choice due to its low viscosity, very poor water solubility, low price and compatibility with the whole-cell biocatalyst. The biphasic system containing 20% (v/v) of this solvent boosted geranyl glucoside production (4.2-fold increase of geranyl glucoside concentration in comparison to aqueous system) and exhibits advantageous partitioning of geraniol into the organic phase (logD of 2.42±0.03) and of geranyl glucoside into the water phase (logD of -2.08±0.05). The systematic selection of a suitable biphasic system constitutes basic groundwork for the development of new bioprocesses involving geraniol. Moreover, this study can serve as a guideline for selecting sequestering phases for other whole-cell biotransformation processes.

Cryptosporidium parvum (studied here) and Cryptosporidium hominis are important causes of diarrhea in infants and immunosuppressed persons. C. parvum vaccine candidates, which are on the surface of sporozoites, include glycoproteins with Ser- and Thr-rich domains (Gp15, Gp40, and Gp900) and a low complexity, acidic protein (Cp23). Here we used mass spectrometry to determine that O-linked GalNAc is present in dense arrays on a glycopeptide with consecutive Ser derived from Gp40 and on glycopeptides with consecutive Thr derived from Gp20, a novel C. parvum glycoprotein with a formula weight of ~20 kDa. In contrast, the occupied Ser or Thr residues in glycopeptides from Gp15 and Gp900 are isolated from one another. Gly at the N-terminus of Cp23 is N-myristoylated, while Cys, the second amino acid, is S-palmitoylated. In summary, C. parvum O-GalNAc transferases, which are homologs of host enzymes, densely modify arrays of Ser or Thr, as well as isolated Ser and Thr residues on C. parvum vaccine candidates. The N-terminus of an immunodominant antigen has lipid modifications similar to those of host cells and other apicomplexan parasites. Mass spectrometric demonstration here of glycopeptides with O-glycans complements previous identification C. parvum O-GalNAc transferases, lectin binding to vaccine candidates, and human and mouse antibodies binding to glycopeptides. The significance of these post-translational modifications is discussed with regards to the function of these proteins and the design of serological tests and vaccines.

WOS: 000399500700007 PubMed ID: 26738443 The purpose of the current research was to prepare and evaluate the potential use of microemulsion-based hydrogel (MBH) formulations for dermal delivery of benzocaine (BZN). The pseudoternary-phase diagrams were constructed for various microemulsions composed of isopropyl myristate (IPM) as oil phase, Span 20, Tween 20, Tween 80, cremophor EL and cremophor RH40 as surfactants, ethanol as cosurfactant and distilled water as aqueous phase. Finally, concentration of BZN in microemulsions was 2% (w/w). The physicochemical properties, such as conductivity, viscosity, pH, droplet size, polydispersity index and zeta potential of microemulsions, were measured. Carbopol 940 was used to convert BZN-loaded microemulsions into gel form without affecting their structure. Furthermore, excised rat abdominal skin was used to compare permeation and penetration properties of BZN loaded M3 and M3BHs with BZN solution. According to ex vivo study results, BZN-loaded M3BH1 showed highest flux values and high release rate values, and furthermore, this gel formulation had low surfactant content. Finally, in order to learn the localization of formulations within the dermal penetration, formulations and BZN solution were labeled with red oil O and subjected to fluorescence observation. In conclusion, BZN-loaded MBHs could be offered as a promising strategy for dermal drug delivery. Istanbul Medipol University, Scientific Research Projects [2015/17] This study was supported by Istanbul Medipol University, Scientific Research Projects No: 2015/17.

In the present study, carbon nanotube (CNT) membranes were prepared to predict skin penetration properties of compounds. A series of penetration experiments using Franz diffusion cells were performed with 16 different membrane compositions for model chemicals. Similar experiments were also carried out with same model molecules using five different commercially available synthetic membranes and human skins for the comparison. Model chemicals were selected as diclofenac, dexketoprofen and salicylic acid. Their permeability coefficients and flux values were calculated. Correlations between permeability values of model compounds for human skins and developed model membranes were investigated. Good correlations were obtained for CNT membrane, isopropyl myristate-treated CNT membrane (IM-CNT membrane) and bovine serum albumin-cholesterol, dipalmitoyl phosphatidyl choline-treated membrane (BSA-Cholesterol-DPPC-IM-CNT membrane). An artificial neural network (ANN) model was developed using some molecular properties and penetration coefficients from pristine CNT membranes to predict skin permeability values and quite good predictions were made.

This article presents results from 47 meconium samples, which were analyzed for fatty acid ethyl esters (FAEE) and ethyl glucuronide (EtG) for detection of gestational alcohol consumption. A validated microwave assisted extraction (MAE) method in combination with GC-MS developed in the Institute of Forensic Science (Santiago de Compostela) was used for FAEE and the cumulative concentration of ethyl myristate, ethyl palmitate and ethyl stearate with a cut-off of 600ng/g was applied for interpretation. A simple method for identification and quantification of EtG has been evaluated by ultrasonication followed solid phase extraction (SPE). Successful validation parameters were obtained for both biochemical markers of alcohol intake. FAEE and EtG concentrations in meconium ranged between values lower than LOD and 32,892ng/g or 218ng/g respectively. We have analyzed FAEE and EtG in the same meconium aliquot, enabling comparison of the efficiency of gestational ethanol exposure detection. Certain agreement between the two biomarkers was found as they are both a very specific alcohol markers, making it a useful analysis for confirmation.

A microemulsion system containing Thai mango seed kernel extract (MSKE, cultivar “Fahlun”) was developed and characterised for the purpose of topical skin delivery. The MSKE-loaded microemulsions were prepared by using the spontaneous emulsification method. Isopropyl myristate (IPM) was selected as the oil phase. A polyoxyethylene sorbitan monooleate and sorbitan monododecanoate (1:1, w/w) system was used as the surfactant phase, an aqueous mixture of different cosurfactants (absolute ethanol, 96.3% v/v ethanol, 1-propanol, 2-propanol or 1,2-propanediol) at a weight ratio of 1:1 was used as the aqueous phase. Among the cosurfactants studied, the 1-propanol aqueous mixture had the largest microemulsion region (48.93%) in the pseudo-ternary phase diagram. Microemulsions containing 1% MSKE demonstrated good physicochemical stability during a six-month study period at 25 ± 2 °C/60% ± 5% RH. The ex vivo skin permeation study demonstrated that the microemulsions exhibited a potent skin enhancement effect allowing MSKE to penetrate skin layers up to 60-fold higher compared with the control. Neither skin irritation nor skin corrosion was observed in ex vivo studies. The present study revealed that IPM-based microemulsion systems may be promising carriers to enhance skin penetration and delivering MSKE for topical treatment.

The aim of this study was to evaluate the in vitro skin permeation and in vivo transdermal absorption of natural progesterone (Prog) from alcoholic gel-based transdermal formulations containing Prog dissolved stably at a concentration of 3%.3% Prog dissolved gel formulations were prepared containing with water, ethanol, 1,3-butylene glycol, carboxyvinylpolymer, diisopropanolamine, polyoxyethylene (2) oleylether and benzyl alcohol. The gel formulations added different hydrophilic surfactants and isopropyl myristate or propylene glycol dicaprylate (PGDC) as oily solvents were applied in vitro permeation study through excised rat skin on unocclusive condition. The gel formulations added polyoxyethylene (20) oleylether (Oleth-20) as hydrophilic surfactant and PGDC were applied in vivo single- and repeated-dose transdermal absorption study of rat on unocclusive condition.The results of evaluation of the gel formulations by an in vitro skin permeation study revealed a high flux of Prog from the formulation containing Oleth-20 and Oleth-20 with PGDC. The results of single and repeated in vivo transdermal absorption studies confirmed that good plasma levels of Prog were achieved and maintained by Oleth-20 and PGDC containing gel formulation.The Oleth-20 and PGDC containing ethanolic gel formulation seemed to have the ability to maintain a high activity of Prog and high diffusivity or solubility of Prog in the epidermis on the practical formulation application.

Kaempferia parviflora (K. parviflora) rhizomes have long been used in traditional folk medicines and as general health-promoting agents. Several biological activities of K. parviflora, especially its anti-inflammatory effect, are due to its major constituents, methoxyflavones. However, the oral bioavailability of these methoxyflavones has been shown to be low. The aim of this study was to investigate the permeation behaviors of K. parviflora methoxyflavones from isopropyl myristate (IPM)-based vehicles. We studied the effects of ethanol and propylene glycol (PG) as the hydrophilic, solvent-type vehicles as well as fatty acids as the permeation enhancers. A permeation experiment was performed in vitro, using side-by-side diffusion cells through the full thickness of pig ear skin. The solubility and permeation of methoxyflavones were able to be modified by choice and ratio of vehicles. The ethanol/IPM vehicle was shown to be more effective in enhancing the solubility and permeation of methoxyflavones when compared to the PG/IPM vehicle. Regarding an optimal balance between solubility or affinity to vehicle and skin to vehicle partition coefficient, the ethanol/IPM vehicle in the ratio of 1:9 maximized the flux. Among the investigated fatty acids, oleic acid showed the greatest enhancing effect on the permeation of methoxyflavones, indicating that saturated fatty acids are less effective than unsaturated fatty acids. Long chain fatty acids increased diffusion coefficient parameter and shortened the lag time. The number of carbon atoms and double bonds of fatty acids did not show direct relation to the profile of permeation of methoxyflavones.