Search

The highly immunogenic icosahedral capsid of hepatitis B virus (HBV) can be exploited as a nanoparticulate display platform for heterologous molecules. Its constituent core protein (HBc) of only ~180 amino acids spontaneously forms capsid-like particles (CLPs) even in E. coli. The immunodominant c/e1 epitope in the center of the HBc primary sequence comprises a solvent-exposed loop that tolerates insertions of flexible peptide sequences yet also of selected whole proteins as long as their 3D structures fit into the two acceptor sites. This constraint is largely overcome in the SplitCore system, where the sequences flanking the loop are expressed as two separate but self-complementing entities, with the foreign sequence fixed to the carrier at one end only. Both the contiguous and the split type of CLP strongly enhance immunogenicity of the displayed sequence but also nonvaccine applications can easily be envisaged. After a brief survey of the basic features of the two HBc carrier forms, we provide conceptual guidelines concerning which foreign proteins are likely to be presentable, or not, on either carrier type. We describe generally applicable protocols for CLP expression in E. coli, cell lysis and CLP enrichment by sucrose gradient velocity sedimentation, plus a simple but meaningful gel electrophoretic assay to assess proper particle formation.

Background. The influence of increasing lateral plateau widening on the frequency of meniscal and ligamentous lesions in lateral tibial plateau fractures has been examined in very few studies using plain radiographs. Because the amount of this parameter cannot be measured accurately on plain radiographs, the purpose of this survey was to look for a possible correlation between the extent of lateral plateau widening, as measured on multidetector CT (MDCT) scans, and different soft-tissue injuries determined from magnetic resonance imaging (MRI). Materials and Methods. 55 patients with a lateral tibial plateau fracture were included in this retrospective case series. Patient age averaged 52.6 years (SD = 18.0). The degree of lateral plateau widening was measured on CT images. MRIs were screened for meniscal and ligamentous injuries. Results. We found a significant effect of increasing lateral plateau widening on the incidence of lateral meniscus lesions (P = 0.021), lateral collateral ligament tears (P = 0.047), and the overall quantity of meniscal and ligamentous lesions (P = 0.001). Discussion. MRIs are not widely used as a diagnostic tool in lateral plateau fractures of the tibia. Reasons might be the costs and the fact that it is a time-consuming examination. The results of this study may help to estimate the probability of specific soft-tissue lesions in lateral tibial plateau fractures based on measurements of lateral plateau widening on MDCT scans, and they may guide the decision for additional MRI and/or arthroscopically assisted repair.

The highly immunogenic icosahedral capsid of hepatitis B virus (HBV) can be exploited as a nanoparticulate display platform for heterologous molecules. Its constituent core protein (HBc) of only ~180 amino acids spontaneously forms capsid-like particles (CLPs) even in E. coli. The immunodominant c/e1 epitope in the center of the HBc primary sequence comprises a solvent-exposed loop that tolerates insertions of flexible peptide sequences yet also of selected whole proteins as long as their 3D structures fit into the two acceptor sites. This constraint is largely overcome in the SplitCore system, where the sequences flanking the loop are expressed as two separate but self-complementing entities, with the foreign sequence fixed to the carrier at one end only. Both the contiguous and the split type of CLP strongly enhance immunogenicity of the displayed sequence but also nonvaccine applications can easily be envisaged. After a brief survey of the basic features of the two HBc carrier forms, we provide conceptual guidelines concerning which foreign proteins are likely to be presentable, or not, on either carrier type. We describe generally applicable protocols for CLP expression in E. coli, cell lysis and CLP enrichment by sucrose gradient velocity sedimentation, plus a simple but meaningful gel electrophoretic assay to assess proper particle formation.

In der Forschung nehmen Vergleichbarkeit und Reproduzierbarkeit immer mehr an Bedeutung zu. Die empirische Forschung profitiert dabei von Forschungsdatenzentren und Scientific Use Files. Für angewandte Methodenforschung dagegen sind geeignete Datenquellen kaum verfügbar, obwohl gerade in den Wirtschafts- und Sozialwissenschaften komplexe Stichprobendesigns bei der Entwicklung und Anwendung von Schätzmethoden berücksichtigt werden müssen. In dieser Arbeit wird ein synthetischer, jedoch realistischer Datensatz vorgestellt, der gerade die Evaluierung und Entwicklung von Schätzmethoden in den Sozial- und Wirtschaftswissenschaften unterstützt. Der Schwerpunkt liegt dabei auf vergleichbarer und reproduzierbarer Forschung in einer realistischen Umgebung in Bezug auf Individual- und Haushaltsdaten. Dieser Datensatz wird der Forschungsgemeinde frei zur Verfügung gestellt. Open and reproducible research receives more and more attention in the research community. Whereas empirical research may benefit from research data centres or scientific use files that foster using data in a safe environment or with remote access, methodological research suffers from the availability of adequate data sources. In economic and social sciences, an additional drawback results from the presence of complex survey designs in the data generating process, that has to be considered when developing and applying estimators. In the present paper, we present a synthetic but realistic dataset based on social science data, that fosters evaluating and developing estimators in social sciences. The focus is on supporting comparable and reproducible research in a realistic framework providing individual and household data. The outcome is provided as an open research data resource.

Idiopathic pulmonary fibrosis (IPF) is a chronic and fatal disease of unknown cause representing the most common form of idiopathic interstitial pneumonias. It is believed that the development of IPF is influenced by both genetic and environmental factors. The pathogenesis of IPF is complex, and many contributing factors to fibrogenesis are known to date. In recent years there have been important advances in the understanding of the pathogenesis of IPF. A large number of experimental studies have highlighted the importance of epithelial cell injury, fibroblast differentiation and myofibroblast activation, the involvement of inflammatory and progenitor cells, and the effect of genetic and epigenetic factors. IPF is characterized by progressive fibroblast proliferation and differentiation followed by excessive deposition of extracellular matrix (ECM). This results in the damage to the structure of the lung, which eventually causes dyspnea and respiratory failure in patients with IPF. This fibrotic ECM microenvironment is characterized by altered biochemical and biomechanical properties and stores abundant amounts of growth factors, all of which can affect the behavior of structural lung cells and also inflammatory cells. This chapter summarizes the newest insights into the pathogenesis of IPF and tries to describe how this knowledge helps to find new therapies for the patients who are suffering from this devastating disease.

For posterior spinal stabilization, loosening of pedicle screws at the bone-screw interface is a clinical complication, especially in the osteoporotic population. Axial pullout testing is the standard pre-clinical testing method for new screw designs although it has questioned clinical relevance. The aim of this study was to determine the fixation strength of three current osteoporotic fixation techniques and to investigate whether or not pullout testing results can directly relate to those of the more physiologic fatigue testing. Thirty-nine osteoporotic, human lumbar vertebrae were instrumented with pedicle screws according to four treatment groups: (1) screw only (control), (2) prefilled augmentation, (3) screw injected augmentation, and (4) unaugmented screws with an increased diameter. Toggle testing was first performed on one pedicle, using a cranial-caudal sinusoidal, cyclic (1.0 Hz) fatigue loading applied at the screw head. The initial compressive forces ranged from 25 to 75 N. Peak force increased stepwise by 25 N every 250 cycles until a 5.4-mm screw head displacement. The contralateral screw then underwent pure axial pullout (5 mm/min). When compared to the control group, screw injected augmentation increased fatigue force (27 %, p = 0.045) while prefilled augmentation reduced fatigue force (−7 %, p = 0.73). Both augmentation techniques increased pullout force compared to the control (ps

At TRIUMF development of a 50 MeV electron accelerator is well under way. Five 1.3 GHz, superconducting 9-cell cavities will accelerate 10 mA electrons to a production target to produce rare isotopes. Each cavity will provide 10 MV accelerating voltage. Plans to upgrade the accelerator in the future to a small ring with ERL capabilities requires that the shunt impedance of the dipole higher order modes to be less than 10 M Ω . The design of the accelerator incorporates beam line absorbers to reduce the shunt impedance of potentially dangerous dipole modes. The performance of the absorber is dependant on its electrical conductivity at the operational temperature. Measurements of the electrical conductivity in RF fields of a sample of the proposed beam line absorber material at room temperature and at its operational temperature will be presented for frequencies between 1.3 and 2.4 GHz.

A combined anterior and posterior surgical approach is generally recommended in the treatment of severe congenital kyphosis, despite the fact that the anterior vascular supply of the spine and viscera are at risk during exposure. The aim of this study was to determine whether the surgical treatment of severe congenital thoracolumbar kyphosis through a single posterior approach is feasible, safe and effective. We reviewed the records of ten patients with a mean age of 11.1 years (5.4 to 14.1) who underwent surgery either by pedicle subtraction osteotomy or by vertebral column resection with instrumented fusion through a single posterior approach. The mean kyphotic deformity improved from 59.9° (45° to 110°) pre-operatively to 17.5° (3° to 40°) at a mean follow-up of 47.0 months (29 to 85). Spinal cord monitoring was used in all patients and there were no complications during surgery. These promising results indicate the possible advantages of the described technique over the established procedures. We believe that surgery should be performed in case of documented progression and before structural secondary curves develop. Our current strategy after documented progression is to recommend surgery at the age of five years and when 90% of the diameter of the spinal canal has already developed. Cite this article: Bone Joint J 2013;95-B:1527–32.

Normal progression of osteoporosis or the rigid reinforcement of the fractured vertebral body with polymethyl methacrylate (PMMA) cement is being discussed as a cause for adjacent-level fractures after vertebroplasty. The purpose of this study was to investigate whether augmentation with low stiffness cement can decrease the risk of adjacent-level fractures in low-quality bone.Eighteen female osteoporotic lumbar specimens (L1-L5) were harvested and divided into three groups according to bone mineral density: (I) native; (II) PMMA; (III) modified PMMA (lower stiffness). For the PMMA and modified PMMA groups, a compression fracture was first mechanically induced in L3, and then the fracture received vertebroplasty treatment. The cement stiffness reduction of the modified PMMA group was achieved via an addition of 8 mL of serum to the typical PMMA base. All specimens were exposed to cyclic loading (4 Hz) and a stepwise increasing applied peak force. Cement stiffness was tested according to ISO 5833.A 51% decrease in cement stiffness was achieved in the modified PMMA group (954 ± 141 vs. 1,937 ± 478 MPa, p0.001). Fatigue fracture force (the force level during cyclic loading at which the deformation experienced a sudden increase; FFF) was significantly affected by bone quality (r (2) = 0.39, p = 0.006) and by the initial fracture force (the force necessary to create the initial fracture in L3 prior to augmentation; r (2) = 0.82, p0.001). Using initial fracture force as a covariate, the FFF of the modified PMMA group (1,764 ± 49 N) was significantly higher than in the PMMA group (1,544 ± 55 N; p = 0.03).A possible method to reduce adjacent-level fractures after vertebroplasty in patients with reduced bone quality could be the use of a lower modulus cement. Therefore, mixing cement with biocompatible fluids could prove useful to tailor cement properties in the operating theater.

The processment of information related to a geographic location has long been difficult due to lacking data sources and processing power. The recent changes in the rise of web-based technologies like OpenStreetMap (OSM) and Google Maps change the picture.With R it is possible to execute a large amount of data and to produce appropriate visualisations. The challenge is to find the necessary spatial information. In this paper an overview is given to reflect the possibilities spatial visualisations in the context of social sciences. Moreover, it provides an introduction to spatial visualisation.Sources for spatial data and methods of data collection are described and examples of visualisations are presented.

Background: Patients with chronic thromboembolic pulmonary disease (CTED) have persistent pulmonary vascular obstruction and exercise intolerance without pulmonary hypertension at rest and may benefit from pulmonary endarterectomy. However, up to now, CTED has been poorly characterized. Objectives: This study aimed to analyze the exercise capacity and limiting factors in CTED. Methods: We compared right heart catheterization and cardiopulmonary exercise test results of patients with CTED [mean pulmonary artery pressure (mPAP) at rest Results: Subjects with CTED show a reduced oxygen uptake [median 76/interquartile range (IQR) 22% pred.] and work rate (median 76/IQR 21 W). The work rate was significantly lower compared to control subjects (p = 0.04) but not significantly different from CTEPH patients (p = 0.66). Oxygen pulse and breathing reserve were normal. CTED subjects showed decreased end-tidal CO2 at anaerobic threshold (28.4/4.3 mm Hg), an elevated VE/VCO2 slope (42.5/23.5), breathing equivalents (EQO2 32.0/8.7, EQCO2 39.5/8.8), alveolar-capillary oxygen gradient (34.7/15.5 mm Hg) and capillary end-tidal carbon dioxide gradient (8.8/5.7 mm Hg) compared to control subjects (p < 0.001). The degree of limitation was similar to that in CTEPH. Conclusions: Despite an mPAP of

In 2011, Germany conducted the first census after the reunification. In contrast to a classical census, a register-assisted census was implemented using population register data and an additional sample. This paper provides an overview of how the sampling design recommendations were set up in order to fulfil legal requirements and to guarantee an optimal but still flexible source of information. The aim was to develop a design that fosters an accurate estimation of the main objective of the census, the total population counts. Further, the design should also adequately support the application of small area estimation methods. Some empirical results are given to provide an assessment of selected methods. The research was conducted within the German Census Sampling and Estimation research project, financially supported by the German Federal Statistical Office.

Recent studies suggest that calcium and 25-[OH]-cholecalciferol represent substantial co-factors in fracture healing. However, there still seems to be no sustainable consensus regarding the influence on fracture healing patterns. In this study, the influence of calcium and vitamin D levels on fracture callus formation was prospectively analysed using pQCT scan.94 postmenopausal females with distal radius fractures and consecutive surgery were included. Calcium, 25-[OH]-cholecalciferol, parathyroid hormone and bone-specific alkaline phosphatase levels were obtained prior surgical treatment and after 6 weeks. A pQCT scan was performed on both sites. Bone mineral density and fracture callus area were determined after detecting the outer border contour at a threshold of 280 mg/ccm. Patients received daily supplements of 1000 mg calcium and 880 IU 25-[OH]-cholecalciferol.Mean 25-[OH]-cholecalciferol level was 19.61 ± 21.87 ng/ml, mean parathyroid hormone level was 52.6 ± 58.9 ng/l and mean Ca level was 2.23 ± 0.35 mmol/l. After 6 weeks of supplementation a significant increase of calcium (p0.001) and 25-[OH]-cholecalciferol (p0.001), and a significant decrease of parathyroid hormone (p0.001) levels were observed. Sixth week follow-up fracture callus area correlated significantly with postoperative normal range calcium levels on the fractured site (p = 0.006). Bone mineral density correlated with age (p0.001), but not with calcium and 25-[OH]-cholecalciferol levels after 6 weeks. All fractures presented timely adequate callus formation.Calcium and parathyroid hormone serum levels influence fracture callus area interpreted as fracture callus formation patterns. Calcium levels within physiological range accounted for highest fracture callus area. Therefore, a balanced calcium homeostasis is required for appropriate callus formation.

Due to increasing life expectancy we see a rising number of joint replacements. Along with the proximal prosthesis in the femur, more and more people have a second implant on the distal ipsilateral side. This might be a retrograde nail or a locking plate to treat distal femur fractures or a constrained knee prosthesis in the case of severe arthrosis. All these constructs can lead to fractures between the implants. The goal of this study was to evaluate the risk of stress risers for interprosthetic fractures of the femur.Thirty human cadaveric femurs were divided into five groups: (1) femurs with a prosthesis on the proximal side only, (2) hip prosthesis on the proximal end and a distal femur nail, (3) femurs with both a hip prosthesis and a constrained knee prosthesis, (4) femurs with a hip prosthesis on the proximal side and a 4.5-mm distal femur locking plate; the locking plate was 230 mm in length, with ten holes in the shaft, and (5) femurs with a proximal hip prosthesis and a 4.5-mm distal femur locking plate; the locking plate was 342 mm in length, with 16 holes in the shaft.Femurs with a hip prosthesis and knee prosthesis showed significantly higher required fracture force compared to femurs with a hip prosthesis and a distal retrograde nail. Femurs with a distal locking plate of either length showed a higher required fracture force than those with the retrograde nail.The highest risk for a fracture in the femur with an existing hip prosthesis comes with a retrograde nail. A distal locking plate for the treatment of supracondylar fractures leads to a higher required fracture force. The implantation of a constrained knee prosthesis that is not loosened on the ipsilateral side does not increase the risk for a fracture.

Background Early diagnosis and prediction of traumatic brain injury (TBI) is essential for determining treatment strategies and allocating resources. This study evaluated the predictive accuracy of Glasgow Coma Scale (GCS) verbal, motor and eye components alone, or in addition to pupil size and reactivity, for TBI. Methods A retrospective cohort analysis of data from 51 425 severely injured patients registered in the Trauma Registry of the German Society for Trauma Surgery from 1993 to 2009 was undertaken. Only directly admitted patients alive on admission and with complete data on GCS, pupil size and pupil reactivity were included. The unadjusted predictive roles of GCS components and pupil parameters, alone or in combination, were modelled using area under the receiver operating characteristic (AUROC) curve analyses and multivariable logistic regression regarding presence of TBI and death. Results Some 24 115 patients fulfilled the study inclusion criteria. Best accuracy for outcome prediction was found for pupil reactivity (AUROC 0·770, 95 per cent confidence interval 0·761 to 0·779) and GCS motor component (AUROC 0·797, 0·788 to 0·805), with less accuracy for GCS eye and verbal components. The combination of pupil reactivity and GCS motor component (AUROC 0·822, 0·814 to 0·830) outmatched the predictive accuracy of GCS alone (AUROC 0·808, 0·800 to 0·815). Pupil reactivity and size were significantly correlated (rs = 0·56, P < 0·001). Patients displaying both unequal pupils and fixed pupils were most likely to have TBI (95·1 per cent of 283 patients). Good outcome (Glasgow Outcome Scale score 4 or more) was documented for only 1929 patients (8·0 per cent) showing fixed and bilateral dilated pupils. Conclusion The best predictive accuracy for presence of TBI was obtained using the GCS components. Pupil reactivity together with the GCS motor component performed best in predicting death.

In PIAAC (Programme for the International Assessment of Adult Competencies) inclusion probabilities have to be known for every respondent at each sampling stage in all participating countries. However, in some cases it is not possible to calculate inclusion probabilities for a sample survey analytically – although the underlying design is probabilistic. In such cases, simulation studies can help to estimate inclusion probabilities and thus ensure that the necessary basis for the calculation of design weights is available. In this section, we present a Monte Carlo simulation using the German sample data. During the selection process for PIAAC Germany an error had occurred. Because of that, it was not possible to determine the inclusion probabilities analytically. Therefore a simulation study with 10,000 runs of the erroneous selection process was set up. As a result it was possible to compute the inclusion probabilities for the sample of PIAAC Germany., methods, data, analyses, Vol 8, No 2 (2014)

In this work we investigate superconducting properties of niobium samples via application of the muon spin rotation/relaxation (muSR) technique. We employ for the first time the muSR technique to study samples that are cutout from large and small grain 1.5 GHz radio frequency (RF) single cell niobium cavities. The RF test of these cavities was accompanied by full temperature mapping to characterize the RF losses in each of the samples. Results of the muSR measurements show that standard cavity surface treatments like mild baking and buffered chemical polishing (BCP) performed on the studied samples affect their surface pinning strength. We find an interesting correlation between high field RF losses and field dependence of the sample magnetic volume fraction measured via muSR. The muSR line width observed in ZF-muSR measurements matches the behavior of Nb samples doped with minute amounts of Ta or N impurities. An upper bound for the upper critical field Hc2 of these cutouts is found., 20 pages, 14 figures

Proximal femoral fractures will gain increasing importance in the future due to the epidemiological development. Osteoporosis is often a limiting factor in the achievement of implant stability. New nailing systems offer the possibility of augmentation of the femoral neck component with cement. The aim of this study was to perform a biomechanical comparison of implant stability in osteoporotic pertrochanteric fractures using the proximal femoral nail antirotation (PFNA, Synthes GmbH, Umkirch, Germany) with cement augmented and non-augmented blades.Bone mineral density (BMD) was measured by dual-energy X-ray absorptiometry (DEXA) in six pairs of fresh-frozen human femurs. Standardised pertrochanteric fractures (AO31-A2.3) were treated with a PFNA. Cement augmentation was performed in six constructs. Axial loading was applied according to a single-leg-stance model using a hydraulic testing machine increasing to 1400N over 10,000 cycles. Biomechanical comparisons between the two groups that were comparable concerning BMD, tip-apex-distance and native stiffness were made with regard to postoperative stiffness, survived cycles, load to failure, failure mechanism and axial displacement.The stiffness of all stabilised femurs was significantly lower than for native specimens (native 702.5±159.6N/mm vs. postoperative 275.4±53.8N/mm, p0.001). Stiffness after instrumentation was significantly greater for the cement augmented group than for the non-augmented group (300.6±46.7N/mm vs. 250.3±51.6N/mm, respectively, p=0.001). Five of the twelve constructs survived cyclic testing. Statistically significant differences of the BMD were detected between survived and failed constructs (0.79±0.17g/cm(2) vs. 0.45±0.12g/cm(2), respectively, p=0.028). The failure loads for specimens surviving 10,000 cycles were 4611.9±2078.9N in the cement augmented group (n=3) and 4516.3N and 3253.5N in the non-augmented group (n=2). Postoperative stiffness was found to be a positive predictor of maximum force to failure (R(2)=0.83, p=0.02).The results of this biomechanical study show that cement augmentation of the PFNA increases the implant stability in osteoporotic pertrochanteric fractures. Further studies are necessary to evaluate this procedure in providing long term clinical results.

In this contribution we present Q‐slope studies performed on about 50 low beta resonators, mainly bulk Nb quarter wave cavities built and/or tested at TRIUMF. The goal of the analysis is to look for trends in the low, medium and high field Q‐slope (LFQS, MFQS, HFQS) regimes for different cavity treatments, temperature and residual resistance. We will focus on medium field Q‐slope and comparisons will then be shown between low and high beta cavities and we will draw some conclusions including a possible contribution of hydrogen to MFQS in low beta resonators.

Several studies have evaluated quantitative anatomic data for direct lateral mass screw fixation. To analyze anatomic landmarks and safe zones for optimal screw placement through the posterior arc of the human atlas, morphometric parameters of 41 adult native human atlas specimens were quantitatively measured. Internal dimensions of the atlas (lateral mass, maximum and minimum intraosseous screw length), minimum height and width of the posterior arc and optimal screw insertion angles were defined on pQCT scans. By this, an optimal posterior screw insertion point (OIP) and a preferable screw direction (PSD) through the posterior arch into the lateral mass of C1 were defined. External dimensions (transverse and sagittal diameter) as well as the width of the mid-portion of C1 lateral mass were significantly higher in male specimens. The mean height of the posterior arch at the vertebral artery groove was 4.1 +/- 0.8 mm in female and 4.6 +/- 0.9 mm in male specimens. The optimal screw insertion point was located 21.6 +/- 1.7 mm in female and 23.6 +/- 2.3 mm in male lateral from the posterior tubercle of C1 (P0.01). The preferable screw direction was a mean medial inclination of 7.9 +/- 1.9 degrees in female and 7.3 +/- 2.7 degrees in male specimens and a mean rostral direction of 2.4 +/- 1.8 degrees in female and 3.1 +/- 1.7 degrees in male specimens. In conclusion, the presented study provides information for the use and design of upper cervical spine instrumentation techniques, such as screw placement to C1 via the posterior arch. The characterization of working areas and safe zones (OIP, PSD) might contribute to a minimization of screw malposition in this highly demanding instrumentation technique.

Graphical abstract, Highlights • Tick saliva proteins Salp15 and Iric-1 promote tick feeding and pathogen transmission. • We established the first bacterial expression system for soluble Salp15 and Iric-1. • Using this system we mapped monoclonal antibody epitopes on Salp15 and Iric-1. • We defined the interaction sites with Borrelia outer surface protein C (OspC). • We elucidated first secondary structure features in Iric-1 by NMR., Ticks transmit numerous pathogens, including borreliae, which cause Lyme disease. Tick saliva contains a complex mix of anti-host defense factors, including the immunosuppressive cysteine-rich secretory glycoprotein Salp15 from Ixodes scapularis ticks and orthologs like Iric-1 from Ixodesricinus. All tick-borne microbes benefit from the immunosuppression at the tick bite site; in addition, borreliae exploit the binding of Salp15 to their outer surface protein C (OspC) for enhanced transmission. Hence, Salp15 proteins are attractive targets for anti-tick vaccines that also target borreliae. However, recombinant Salp proteins are not accessible in sufficient quantity for either vaccine manufacturing or for structural characterization. As an alternative to low-yield eukaryotic systems, we investigated cytoplasmic expression in Escherichia coli, even though this would not result in glycosylation. His-tagged Salp15 was efficiently expressed but insoluble. Among the various solubility-enhancing protein tags tested, DsbA was superior, yielding milligram amounts of soluble, monomeric Salp15 and Iric-1 fusions. Easily accessible mutants enabled epitope mapping of two monoclonal antibodies that, importantly, cross-react with glycosylated Salp15, and revealed interaction sites with OspC. Free Salp15 and Iric-1 from protease-cleavable fusions, despite limited solubility, allowed the recording of 1H–15N 2D NMR spectra, suggesting partial folding of the wild-type proteins but not of Cys-free variants. Fusion to the NMR-compatible GB1 domain sufficiently enhanced solubility to reveal first secondary structure elements in 13C/15N double-labeled Iric-1. Together, E. coli expression of appropriately fused Salp15 proteins may be highly valuable for the molecular characterization of the function and eventually the 3D structure of these medically relevant tick proteins.