Search

Prosthetic gait implies the use of compensatory motor strategies, including alterations in gait biomechanics and adaptations in the neural control mechanisms adopted by the central nervous system. Despite the constant technological advancements in prostheses design that led to a reduction in compensatory movements and an increased acceptance by the users, a deep comprehension of the numerous factors that influence prosthetic gait is still needed. The quantitative prosthetic gait analysis is an essential step in the development of new and ergonomic devices and to optimize the rehabilitation therapies. Nevertheless, the assessment of prosthetic gait is still carried out by a heterogeneous variety of methodologies, and this limits the comparison of results from different studies, complicating the definition of shared and well-accepted guidelines among clinicians, therapists, physicians, and engineers. This perspective article starts from the results of a project funded by the Italian Worker's Compensation Authority (INAIL) that led to the generation of an extended dataset of measurements involving kinematic, kinetic, and electrophysiological recordings in subjects with different types of amputation and prosthetic components. By encompassing different studies published along the project activities, we discuss the specific information that can be extracted by different kinds of measurements, and we here provide a methodological perspective related to multimodal prosthetic gait assessment, highlighting how, for designing improved prostheses and more effective therapies for patients, it is of critical importance to analyze movement neural control and its mechanical actuation as a whole, without limiting the focus to one specific aspect.

Lifting tasks, among manual material handling activities, are those mainly associated with low back pain. In recent years, several instrumental-based tools were developed to quantitatively assess the biomechanical risk during lifting activities. In this study, parameters related to balance and extracted from the Centre of Pressure (CoP) data series are studied in fatiguing frequency-dependent lifting activities to: i) explore the possibility of classifying people with LBP and asymptomatic people during the execution of task; ii) examine the assessment of the risk levels associated with repetitive lifting activities, iii) enhance current understanding of postural control strategies during lifting tasks. Data were recorded from 14 asymptomatic participants and 7 participants with low back pain. The participants performed lifting tasks in three different lifting conditions (with increasing lifting frequency and risk levels) and kinetic and surface electromyography (sEMG) data were acquired. Kinetic data were used to calculated the CoP and parameters extracted from the latter show a discriminant capacity for the groups and the risk levels. Furthermore, sEMG parameters show a trend compatible with myoelectric manifestations of muscular fatigue. Correlation results between sEMG and CoP velocity parameters revealed a positive correlation between amplitude sEMG parameters and CoP velocity in both groups and a negative correlation between frequency sEMG parameters and CoP velocity. The current findings suggest that it is possible to quantitatively assess the risk level when monitoring fatiguing lifting tasks by using CoP parameters as well as identify different motor strategies between people with and without LBP.

The interpretability of gait analysis studies in people with rare diseases, such as those with primary hereditary cerebellar ataxia (pwCA), is frequently limited by the small sample sizes and unbalanced datasets. The purpose of this study was to assess the effectiveness of data balancing and generative artificial intelligence (AI) algorithms in generating synthetic data reflecting the actual gait abnormalities of pwCA. Gait data of 30 pwCA (age: 51.6 ± 12.2 years; 13 females, 17 males) and 100 healthy subjects (age: 57.1 ± 10.4; 60 females, 40 males) were collected at the lumbar level with an inertial measurement unit. Subsampling, oversampling, synthetic minority oversampling, generative adversarial networks, and conditional tabular generative adversarial networks (ctGAN) were applied to generate datasets to be input to a random forest classifier. Consistency and explainability metrics were also calculated to assess the coherence of the generated dataset with known gait abnormalities of pwCA. ctGAN significantly improved the classification performance compared with the original dataset and traditional data augmentation methods. ctGAN are effective methods for balancing tabular datasets from populations with rare diseases, owing to their ability to improve diagnostic models with consistent explainability. [ABSTRACT FROM AUTHOR]

Multiple myeloma (MM) patients complain of pain and stiffness limiting motility. To determine if patients can benefit from vertebroplasty, we assessed muscle activation and co-activation before and after surgery. Five patients with MM and five healthy controls performed sitting-to-standing and lifting tasks. Patients performed the task before and one month after surgery. Surface electromyography (sEMG) was recorded bilaterally over the erector spinae longissimus and rectus abdominis superior muscles to evaluate the trunk muscle activation and co-activation and their mean, maximum, and full width at half maximum were evaluated. Statistical analyses were performed to compare MM patients before and after the surgery, MM and healthy controls and to investigate any correlations between the muscle's parameters and the severity of pain in patients. The results reveal increased activations and co-activations after vertebroplasty as well as in comparison with healthy controls suggesting how MM patients try to control the trunk before and after vertebroplasty surgery. The findings confirm the beneficial effects of vertebral consolidation on the pain experienced by the patient, despite an overall increase in trunk muscle activation and co-activation. Therefore, it is important to provide patients with rehabilitation treatment early after surgery to facilitate the CNS to correctly stabilize the spine without overloading it with excessive co-activations. [ABSTRACT FROM AUTHOR]

Abstract Background The above-knee amputation of a lower limb is a severe impairment that affects significantly the ability to walk; considering this, a complex adaptation strategy at the neuromuscular level is needed in order to be able to move safely with a prosthetic knee. In literature, it has been demonstrated that muscle activity during walking can be described via the activation of a small set of muscle synergies. The analysis of the composition and the time activation profiles of such synergies have been found to be a valid tool for the description of the motor control schemes in pathological subjects. Methods In this study, we used muscle synergy analysis techniques to characterize the differences in the modular motor control schemes between a population of 14 people with trans-femoral amputation and 12 healthy subjects walking at two different (slow and normal self-selected) speeds. Muscle synergies were extracted from a 12 lower-limb muscles sEMG recording via non-negative matrix factorization. Equivalence of the synergy vectors was quantified by a cross-validation procedure, while differences in terms of time activation coefficients were evaluated through the analysis of the activity in the different gait sub-phases. Results Four synergies were able to reconstruct the muscle activity in all subjects. The spatial component of the synergy vectors did not change in all the analysed populations, while differences were present in the activity during the sound limb’s stance phase. Main features of people with trans-femoral amputation’s muscle synergy recruitment are a prolonged activation of the module composed of calf muscles and an additional activity of the hamstrings’ module before and after the prosthetic heel strike. Conclusions Synergy-based results highlight how, although the complexity and the spatial organization of motor control schemes are the same found in healthy subjects, substantial differences are present in the synergies’ recruitment of people with trans femoral amputation. In particular, the most critical task during the gait cycle is the weight transfer from the sound limb to the prosthetic one. Future studies will integrate these results with the dynamics of movement, aiming to a complete neuro-mechanical characterization of people with trans-femoral amputation’s walking strategies that can be used to improve the rehabilitation therapies.

IntroductionGait deficits are debilitating in people with Parkinson's disease (PwPD), which inevitably deteriorate over time. Gait analysis is a valuable method to assess disease-specific gait patterns and their relationship with the clinical features and progression of the disease.ObjectivesOur study aimed to i) develop an automated diagnostic algorithm based on machine-learning techniques (artificial neural networks [ANNs]) to classify the gait deficits of PwPD according to disease progression in the Hoehn and Yahr (H-Y) staging system, and ii) identify a minimum set of gait classifiers.MethodsWe evaluated 76 PwPD (H-Y stage 1-4) and 67 healthy controls (HCs) by computerized gait analysis. We computed the time-distance parameters and the ranges of angular motion (RoMs) of the hip, knee, ankle, trunk, and pelvis. Principal component analysis was used to define a subset of features including all gait variables. An ANN approach was used to identify gait deficits according to the H-Y stage.ResultsWe identified a combination of a small number of features that distinguished PwPDs from HCs (one combination of two features: knee and trunk rotation RoMs) and identified the gait patterns between different H-Y stages (two combinations of four features: walking speed and hip, knee, and ankle RoMs; walking speed and hip, knee, and trunk rotation RoMs).ConclusionThe ANN approach enabled automated diagnosis of gait deficits in several symptomatic stages of Parkinson's disease. These results will inspire future studies to test the utility of gait classifiers for the evaluation of treatments that could modify disease progression.

Patients affected by neurological pathologies with motor disorders when they are of working age have to cope with problems related to employability, difficulties in working, and premature work interruption. It has been demonstrated that suitable job accommodation plans play a beneficial role in the overall quality of life of pathological subjects. A well-designed return-to-work program should consider several recent innovations in the clinical and ergonomic fields. One of the instrument-based methods used to monitor the effectiveness of ergonomic interventions is surface electromyography (sEMG), a multi-channel, non-invasive, wireless, wearable tool, which allows in-depth analysis of motor coordination mechanisms. Although the scientific literature in this field is extensive, its use remains significantly underexploited and the state-of-the-art technology lags expectations. This is mainly attributable to technical and methodological (electrode-skin impedance, noise, electrode location, size, configuration and distance, presence of crosstalk signals, comfort issues, selection of appropriate sensor setup, sEMG amplitude normalization, definition of correct sEMG-related outcomes and normative data) and cultural limitations. The technical and methodological problems are being resolved or minimized also thanks to the possibility of using reference books and tutorials. Cultural limitations are identified in the traditional use of qualitative approaches at the expense of quantitative measurement-based monitoring methods to design and assess ergonomic interventions and train operators. To bridge the gap between the return-to-work rehabilitation and other disciplines, several teaching courses, accompanied by further electrodes and instrumentations development, should be designed at all Bachelor, Master and PhD of Science levels to enhance the best skills available among physiotherapists, occupational health and safety technicians and ergonomists.

We collected the gait parameters and lower limb joint kinematics of patients with three different types of primary degenerative neurological diseases: (i) cerebellar ataxia (19 patients), (ii) hereditary spastic paraparesis (26 patients), and (iii) Parkinson’s disease (32 patients). Sixty-five gender-age matched healthy subjects were enrolled as control group. An optoelectronic motion analysis system was used to measure time-distance parameters and lower limb joint kinematics during gait in both patients and healthy controls.

This editorial discusses the importance of job integration and reintegration for individuals with neuromuscular disorders and how advancements in technology can aid in this process. It emphasizes the need for rehabilitation, medical and surgical treatments, and ergonomic interventions to enable these individuals to fully benefit from vocational rehabilitation and overcome barriers to employment. The editorial also highlights the European Union's efforts to improve the social and economic status of persons with disabilities and the use of wearable monitoring sensors, feedback devices, exoskeletons, and collaborative robots in movement-related elements. The article proposes the use of a mobile collaborative robot with an interaction-assistive whole-body interface to help individuals who struggle with balance. [Extracted from the article]

When performing lifting tasks at work, the Lifting Index (LI) is widely used to prevent work-related low-back disorders, but it presents criticalities pertaining to measurement accuracy and precision. Wearable sensor networks, such as sensorized insoles and inertial measurement units, could improve biomechanical risk assessment by enabling the computation of an adaptive LI (aLI) that changes over time in relation to the actual method of carrying out lifting. This study aims to illustrate the concepts and mathematics underlying aLI computation and compare aLI calculations in real-time using wearable sensors and force platforms with the LI estimated with the standard method used by ergonomists and occupational health and safety technicians. To reach this aim, 10 participants performed six lifting tasks under two risk conditions. The results show us that the aLI value rapidly converges towards the reference value in all tasks, suggesting a promising use of adaptive algorithms and instrumental tools for biomechanical risk assessment. [ABSTRACT FROM AUTHOR]