Search

Aim: The aim of the present study was to determine immediate changes of global and regional lung function after exogenous surfactant administration in mechanically ventilated infants with respiratory distress syndrome (RDS) using electrical impedance tomography (EIT) measurements. Materials and Methods: A prospective study was conducted in a Neonatal Intensive Care Unit at a university hospital. Seventeen preterm infants (<12 hours old) suffering from RDS were included in this study. Interventions taken were lowpressure recruitment maneuver, surfactant administration and minimal adjustments in ventilator settings. Repeated EIT measurements (401 in total) were performed before and after (15 min - 30 min) surfactant administration. Global lung function changes were assessed with two markers, namely absolute resistivity (AbsR) and normalized impedance change (ΔZ); redistribution of regional lung ventilation was assessed as well. Airway pressure and arterial blood gases were recorded. Results: Surfactant administration resulted in a statistically significant increase of both the AbsR and ΔZ markers. Moreover, there was a ventilation shift towards dorsal - dependent lung areas with less asymmetry in the right-to-left air distribution. Conclusions: Surfactant administration in the recruited lung with RDS modifies regional ventilation, as assessed by EIT, contributing to a more homogeneous air distribution. Furthermore, significant changes in EIT markers reflect improvement of global lung function after surfactant administration. [ABSTRACT FROM AUTHOR]

Treatment of cardiorespiratory system diseases is a procedure that usually demands data collection on terms of the anatomy and the operation of the organs that are under study. Electrical Impedance Tomography (EIT) is an alternative approach, in comparison to existing techniques. With EIT electrodes are placed in the perimeter of the human body and images of the estimated organ are reconstructed, using the measurement of its impendence (or resistance) distribution and determining its alteration through time, while at the same time the patient is not exposed to ionizing radiation. Its clinical use presupposes the correct placement of the electrodes over the perimeter of the human body, the rapid data collection and electrical safety. It is a low cost technique and it is implemented near the patient. It is able to determine the distribution of ventilation, blood supply, diffused or localized lung defects, but it can also estimate therapeutic interventions or alteration to assisted ventilation of the neonate. EIT was developed at the beginning of the 1980s, but it has only recently begun to be implemented on neonates, and especially in the study of their respiratory system function. The low rate of image analysis is considered to be a drawback, but it is offset by the potential offered for the estimation of lungs' function (both under normal and pathological conditions), since ventilation and resistance are two quite similar concepts. In this review the most important studies about EIT are mentioned as a method of estimating respiratory distress syndrome in neonates. In terms of the above mentioned development, it is supposed that this technique will offer a great amount of help to the doctor in his / her estimations of the cardiorespiratory system and to his / her selection of the best intervening strategies. [ABSTRACT FROM AUTHOR]

Findings supporting the counter-intuitive thesis that smaller body size promotes greater health and longevity are reviewed. In addition, the risks of promoting further growth through genetic manipulation are explored in relation to chronic disease and longevity. Supporting examples from animal research are also covered. The biological mechanisms that relate to height and longevity conclude the review. [ABSTRACT FROM AUTHOR]

The European Union's Workers' Directive 2013/35/EU on the minimum health and safety requirements regarding the exposure of workers to electromagnetic fields specifies action levels (ALs) for external electric and magnetic fields, which should protect against induced tissue-internal electric field strength E i above the exposure limit values, the latter being defined in order to prevent tissue stimulation at low frequencies. However, although 2013/35/EU explicitly calls for the protection of 'workers at particular risk' (including workers with metallic implants), the AL specified in the Directive have been derived under the assumption that there are no metallic parts present inside the body. Therefore, in the present work, we analysed the situation of a worker's hand and forearm bearing metallic implants (Herbert screw and volar radius plate) used for osteosynthesis after the most common bone fractures of the hand/forearm, exposed to low frequency magnetic fields. The uniform exposure of the whole hand and forearm as well as the exposure to a specific and widely used device, a deactivator for single-use labels of acousto-magnetic electronic article surveillance systems, were considered based on numerical computations using a high-resolution anatomical hand and forearm model. The results obtained indicated that the maximum induced electric field strength averaged in a volume of 2 mm × 2 mm × 2 mm cube was higher in the presence of the metallic implants by a factor of up to 4.2 for bone tissue and 2.3 for soft tissue compared with the case without an implant. Hence, it is obvious that the local induced electric field strengths may be substantially increased by the implants. The extent of this increase, however, is highly dependent on the implant's position inside the body, the implant's geometry, and the field distribution and orientation with respect to the anatomical structure and the implant., (© 2024 Society for Radiological Protection. Published on behalf of SRP by IOP Publishing Limited. All rights reserved.)

The present study focuses on the development of a methodology for evaluating the safety of MNH systems, through the numerical prediction of the induced temperature rise in superficial skin layers due to eddy currents heating under an alternating magnetic field (AMF). The methodology is supported and validated through experimental measurements of the AMF's distribution, as well as temperature data from the torsos of six patients who participated in a clinical trial study. The simulations involved a computational model of the actual coil, a computational model of the cooling system used for the cooling of the patients during treatment, and a detailed human anatomical model from the Virtual Population family. The numerical predictions exhibit strong agreement with the experimental measurements, and the deviations are below the estimated combined uncertainties, confirming the accuracy of computational modeling. This study highlights the crucial role of simulations for translational medicine and paves the way for personalized treatment planning.

Owing to the advancement of wireless technologies, there is a strong public perception of increasing exposure to Radiofrequency (RF) electromagnetic fields (EMF). The aim of this study is to determine the evolution of EMF in the environment, and consequently, human exposure to them, over a period of about two decades, spanning from the end of 2003 until February 2022. The study is based on data collected by two non-ionizing radiation monitoring networks in Greece. The networks consist of fixed EMF sensors that register the RMS electric field value every 6 min, on a 24 h basis. We used the Seasonal-Trend decomposition method using (LOESS), known as the STL method to decompose the time series into trend, seasonal, and noise components. Additionally, since the sensors include frequency filters for separating the cellular frequencies, the recorded data were used to identify the exposure contribution by cellular networks in comparison to other EMF sources. The study indicates that RF-EMF do not explicitly decrease or increase but rather fluctuate over time. Similarly, the contribution of mobile cellular networks to the total field change over time., (© 2023. Springer Nature Limited.)

Farm animals behavior research uses video cameras, mainly for visual observation and recording. The purpose of this feasibility study was to enrich the predictable methods of boar semen production capacity by correlating sperm variables with the scrotal contractions (SC) frequency and intensity. A video camera was used to record the reaction of the scrotum during ejaculation. The respective collected ejaculates were evaluated and semen parameters, such as viability, morphology, membranes functional integrity and kinematics, were determined. The camera recorded the scrotal contractions/relaxations and the video was handled by the Image Processing Toolbox of Matlab (Mathworks Inc., Natick, MA, USA). The SC intensity was verified as a percentage change in the scrotum size among the video frames of maximum contraction and relaxation. The archived data from the frames were analyzed statistically, using a linear mixed effects model that involved sperm assessed parameters. Correlations of the SC intensity with the average path velocity, VAP (R 2 = 0.591, p = 0.043) and with the percentage of the cytoplasmic droplets (R 2 = 0.509, p = 0.036) were noticed. Previous studies reported the positive correlation of VAP with the number of live-born piglets. In conclusion, video monitoring of the boar scrotal function during ejaculation is useful, but more research is needed to establish its appropriateness as a supplementary method for the prognosis of boar ability to produce high-quality semen.

The ever-increasing use of wireless communication systems during the last few decades has raised concerns about the potential health effects of electromagnetic fields (EMFs) on humans. Safety limits and exposure assessment methods were developed and are regularly updated to mitigate health risks. Continuous radiofrequency EMF monitoring networks and in situ measurement campaigns provide useful information about environmental EMF levels and their variations over time and in different microenvironments. In this study, published data from the five largest monitoring networks and from two extensive in situ measurement campaigns in different European countries were gathered and processed. Median electric field values for monitoring networks across different countries lay in the interval of 0.67-1.51 V/m. The median electric field value across different microenvironments, as evaluated from in situ measurements, varied from 0.10 V/m to 1.42 V/m. The differences between networks were identified and mainly attributed to variations in population density. No significant trends in the temporal evolution of EMF levels were observed. The influences of parameters such as population density, type of microenvironment, and height of measurement on EMF levels were investigated.

The blood−brain barrier is a highly selective semipermeable border that separates blood circulation from the brain and hinders the accumulation of substances in the central nervous system. Hence, a treatment plan aiming to combat neurodegenerative diseases may be restricted. The exploitation of the nose−brain pathway could be a promising bypass method. However, pharmaceutical uptake through the olfactory epithelium is insignificant in terms of treatment, if relying only on fluid dynamic interactions. The main reasons for this are the highly complicated geometry of the nose and the residence time of the substance. The issue can be tackled by using magnetic particles as drug carriers. With the application of an external magnetic field, further control of the particle motion can be achieved, leading to increased uptake. The present work studies this approach computationally by employing magnetite particles with a radius of 7.5 μm while a magnetic field is applied with a permanent neodymium-iron-boron magnet of 9.5×105 A/m magnetization. Through this investigation, the best drug delivery protocol achieved a 2% delivery efficiency. The most significant advantage of this protocol is its straightforward design, which does not require complex equipment, thus rendering the protocol portable and manageable for frequent dosing or at-home administration.

The FDA cleared deep transcranial magnetic stimulation (Deep TMS) with the H7 coil for obsessive-compulsive disorder (OCD) treatment, following a double-blinded placebo-controlled multicenter trial. Two years later the FDA cleared TMS with the D-B80 coil on the basis of substantial equivalence. In order to investigate the induced electric field characteristics of the two coils, these were placed at the treatment position for OCD over the prefrontal cortex of a head phantom, and the field distribution was measured. Additionally, numerical simulations were performed in eight Population Head Model repository models with two sets of conductivity values and three Virtual Population anatomical head models and their homogeneous versions. The H7 was found to induce significantly higher maximal electric fields (p<0.0001, t = 11.08) and to stimulate two to five times larger volumes in the brain (p<0.0001, t = 6.71). The rate of decay of electric field with distance is significantly slower for the H7 coil (p < 0.0001, Wilcoxon matched-pairs test). The field at the scalp is 306% of the field at a 3 cm depth with the D-B80, and 155% with the H7 coil. The H7 induces significantly higher intensities in broader volumes within the brain and in specific brain regions known to be implicated in OCD (dorsal anterior cingulate cortex (dACC), dorsolateral prefrontal cortex (dlPFC), inferior frontal gyrus (IFG), orbitofrontal cortex (OFC) and pre-supplementary motor area (pre-SMA)) compared to the D-B80. Significant field ≥ 80 V/m is induced by the H7 (D-B80) in 15% (1%) of the dACC, 78% (29%) of the pre-SMA, 50% (20%) of the dlPFC, 30% (12%) of the OFC and 15% (1%) of the IFG. Considering the substantial differences between the two coils, the clinical efficacy in OCD should be tested and verified separately for each coil., Competing Interests: I have read the journal’s policy and the authors of this manuscript have the following competing interests: Dr. Roth and Dr. Zangen are key inventors of Deep TMS technology and have financial interest in BrainsWay. Dr. Harmelech, Dr. Zibman and Dr. Pell are BrainsWay employees. Dr. Tendler serves as the chief medical officer of and has a financial interest in BrainsWay, and he has ownership interest in Advanced Mental Health Care, Inc. Dr. Samaras, Dr. Kimiskidis and Ms. Tzirini have no competing interests. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

Biomedical measurements by specialized technological equipment have been used in farm animals to collect information about nutrition, behavior and welfare. This study investigates the relation of semen quality (CASA analysis, viability, morphology, membrane biochemical activity and DNA fragmentation) with boar behavior during ejaculation. Sensors were placed on the boar’s body. Movement features were collected using an inertial measurement unit (IMU), comprising an accelerometer, a gyroscope and a magnetometer. Boar, scrotal and dummy temperatures were measured by an infrared (IR) camera and an IR thermometer, while the face salivation of the boar was recorded by a moisture meter (also based on IR technology). All signals and images were logged on a mobile device (smartphone or tablet) using a Bluetooth connection and then transferred wirelessly to the cloud. The data files were then processed using scripts in MATLAB 2021a (MathWorks, Natick, Massachusetts) to derive the necessary indices. Ninety-four ejaculates from five boars were analyzed in this study. The statistical analysis was performed in the Statistics and Machine Learning Toolbox of MATLAB 2021a using a linear mixed effects model. Significant and strong negative correlations (R2 > 0.5, p ≤ 0.05) were observed between boar, dummy and scrotal temperature with the progressive, rapid and slow movement of spermatozoa, VCL (curvilinear velocity), VSL (straight line velocity) and ALH (amplitude of lateral head displacement) kinematics. The volume of the ejaculate was correlated with the scrotal and dummy temperature. Dummy’s temperature was negatively correlated with BCF (beat/cross-frequency), viability and total time of ejaculation, while it was positively correlated with abnormal morphology. Body temperature was negatively correlated with BCF. Positive correlations were noticed between VAP (average path velocity) and total time of ejaculation with body acceleration features, as well as between the overall dynamic body acceleration (ODBA) and total time of ejaculation. In conclusion, the use of biomedical sensors can support the evaluation of boar sperm production capacity, providing valuable information about semen quality.