Search

Novel green photocatalysts based on ZnO in the presence of arabic gum (AGZ) or karaya gum (KGZ) were synthesized by a sol-gel method for photocatalytic performance. The materials were characterized by XRD, FTIR spectroscopy, SEM, nitrogen adsorption/desorption, and PL and diffuse reflectance spectroscopy. Photocatalytic test was performed using methylene blue (MB) dye as the target pollutant under visible light. The reuse of photocatalysts and Artemia saline bioassays were investigated. The ZnO nanoparticles showed a hexagonal structure and the values of the band gaps were 2.95 (AGZ) and 2.98 eV (KGZ). The PL results demonstrated emission bands at 440, 473 or 478 and 549 nm. The textural properties indicated the presence of typically mesoporous materials. The MB discoloration efficiency was 81.5% and 91.0% for AGZ and KGZ, respectively. The photocatalytic activity of AGZ and KGZ was maintained after the third run. The ˙OH radicals are the main species involved in the MB discoloration. The MB discoloration from the photocatalysts showed no toxicity; therefore, they are considered to be promising materials for the degradation of the dye in the photocatalytic process.

Incorporation of drugs in clay minerals has been widely proposed for the controlled-release or increased solubility of drugs. In this context, a bionanocomposite based on kaolinite and cashew gum (Kln/Gum) was synthesized and characterized by X-ray diffraction (XRD), thermal analysis (TG/DTA), and Fourier transform infrared spectroscopy (FTIR). The bionanocomposite was applied to the incorporation and further release of doxazosin mesylate (DB). The influence of solution pH (1-3), adsorbent dose (20-50 mg), initial drug concentration (20.0-70.0 mg L -1 ), contact time (15-300 min), and temperature (25, 35, and 45 °C) were systematically evaluated. Equilibrium was reached around 60 min, with a maximum adsorption capacity of 31.5 ± 2.0 mg g -1 at a pH of 3.0 and 25 °C. Hydrogen bonding contributed to DB incorporation on the Kln/Gum. In addition, DB maximum amounts of 16.80 ± 0.58 and 77.00 ± 2.46% were released at pH values of 1.2 and 7.4, respectively. These results indicated that the Kln/Gum bionanocomposite is an effective and promising material for the incorporation/release of drugs with similar structures to DB., (Copyright © 2020 Elsevier B.V. All rights reserved.)

It was developed a material to act as an antimicrobial and antiparasitic agent through a modification reaction in the gum structure extracted from the plant Sterculia striata. This material was characterized, the oxidant activity was evaluated and the antimicrobial activity against Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Salmonella Typhimurium and Klebsiella pneumoniae was investigated, in addition to the effect against Leishmania amazonensis, testing its acute toxicity and its cytotoxicity in human cells. Characterization techniques proved the success of chemical modification. The modification led to an increase in antioxidant activity, with excellent antibacterial activity, reaching almost 100% inhibition for P. aeruginosa and S. Typhimurium, and inhibitory effect above 70% against L. amazonensis, with an affinity far superior to the parasite than macrophages. The derivative showed no acute toxicity, it was non-hemolytic, increased cell viability in macrophages and fibroblasts, and stimulated cell proliferation of keratinocytes, thus being a strong candidate to be used as an antimicrobial and antiparasitic agent in biomedical applications., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Nano-heterostructures of titanate nanotubes were synthesized and they revealed a complex structure with the formation of TiO 2 (anatase), CeO 2 , Ag 2 O and metallic silver nanoparticles on the outer walls and intercalation of Ce 4+ and Ag + into the interlayer spaces of the nanotubes by microwave-assisted hydrothermal process and subjected to ion exchange reactions. To the best of our knowledge, this is the first reported silver and cerium co-exchanged titanate nanotubes for bio-applications. The co-ion exchange processes preserved the original tubular structure of titanate nanotubes with significant changes of the superficial as well as interlamellar environment. This study opens up possibility of synthesizing complex, functional nano-heterostructure with the scope of modification of the final structure, especially the amount and oxidation state of the intercalated cation (Ce 4+ , Ce 3+ and Ag + ) as well as the quantity and variety of the decorating nanoparticles (CeO 2 , Ag 2 O or metallic Ag). The interplay of which, in turn, can lead to important biological properties and applications, owing to their ion-liberation capacity. The samples were tested in antibacterial activity with two different kind of bacteria (gram positive and negative), cell cytotoxicity and adhesion, and it was found that the nano-heterostructure formed shows high antibacterial activity with low cytotoxicity and high cell adhesion, which makes it a promising material for further health applications., Competing Interests: Declaration of competing interest On behalf of the authors of the article “Synthesis of Silver-Cerium Titanate Nanotubes and their surface properties and antibacterial applications”, I certify that they have NO affiliations with or involvement in any organization or entity with any financial interest (such as honoraria; educational grants; participation in speakers' bureaus; membership, employment, consultancies, stock ownership, or other equity interest; and expert testimony or patent-licensing arrangements), or non-financial interest (such as personal or professional relationships, affiliations, knowledge or beliefs) in the subject matter or materials discussed in this manuscript., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Cactus pears face challenges due to global climate change, which is leading to in-depth research to monitor and increase their water activity. The objective of this study was to evaluate the use of the natural test hydrogel (TH) from Orbignya phalerata fibre as nutrients and water for growing cactus pear genotypes ("Baiana" and "Doce" [ Nopalea cochenillifera ], 'Gigante' [ Opuntia fícus-indica ], and "Mexican Elephant Ear" [ Opuntia stricta ]) compared to the use of commercial hydrogel (CH), which is based on polymers composed of polyacrylamide, and a treatment without the use of hydrogel (WH). A completely randomized design was used, in a factorial scheme (4 × 3), with four genotypes of cactus pear and three forms of hydration, with five replications. The number and area of cladode was greatest ( p < 0.01) in plants with CH and TH irrigation-fertilization in the 'Doce' cactus genotype. The dry biomass of the cladode and root in the 'Gigante' cactus genotype was greatest ( p < 0.01) in the treatments with CH and TH irrigation-fertilisation. The 'Baiana', 'Doce', and 'Gigante' cactus genotypes exhibited more ( p < 0.01) dry matter content with the TH irrigation-fertilisation. The highest ( p < 0.01) neutral detergent fibre content was observed in the 'Baiana' and 'Doce' cactus genotypes when irrigation occurred with WH treatment, and the highest acid detergent fibre content in the 'Gigante' genotype. The copolymerized natural fibre from the mesocarp of Orbignya phalerata (babassu fruit) induced a better growth and chemical composition of cactus pear genotypes than the hydrogel based on polymers composed of polyacrylamide., Competing Interests: The authors declare no conflict of interest.

Diclofenac sodium (DS) is an emergent pollutant, and among the methods investigated for its removal, adsorption is the most widely utilized technique. Hydroxyapatite and chitosan are biomaterials often used for adsorption. However, both biomaterials are limited due to their low chemical stability in an acidic medium; furthermore, pure hydroxyapatite interacts poorly with diclofenac. In this work, hydroxyapatite was organofunctionalized with 3-aminopropyltrimethoxysilane and further used to obtain amino hydroxyapatite /chitosan hybrids by crosslinking with glutaraldehyde at pH 3, 4, 5, and 6. X-ray diffraction patterns indicated the preservation of the hydroxyapatite phase under all pH conditions. Based on the control reaction of the amino hydroxyapatite with glutaraldehyde and its further reduction in sodium borohydride, the formation of CN moieties was highlighted as the main interaction mechanism between the aldehyde and amino groups. Therefore, crosslinking with glutaraldehyde was evaluated by infrared, Raman spectroscopy, and 13 C NMR techniques; the results suggested contributions of imine formation and hydrogen bonding. The hybrid obtained at pH 3 exhibited an enhanced adsorption capacity of 125 mg g -1 at 15 min. The synergy between amino hydroxyapatite and chitosan crosslinked by glutaraldehyde was demonstrated., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The buriti oil ( Mauritia flexuosa L.) can be associated with polymeric matrices for biomedical applications. This study aimed to evaluate the effect of chitosan gel (CG) associated with buriti oil (CGB) as a healing agent. The fatty acids and volatile compounds composition of buriti oil were performed and the composite gels were characterized using FTIR and thermal analysis. Biological tests including antimicrobial, antioxidant, anti-inflammatory and healing effects were also investigated. Buriti oil is composed of oleic and palmitic acids, and the main volatile compounds were identified. The buriti oil did not show antimicrobial activity, on the other hand, the composite gel (chitosan and oil) proved to be efficient against Staphylococcus aureus and Klebsiella pneumonia at the 10 mg/mL. Similar behavior was observed for antioxidant activity, determined by the β-carotene bleaching assay, composite gels presenting higher activity and buriti oil showed anti-inflammatory activity, which may be related to the inhibition of the release of free radicals. Regarding wound healing performed using in vivo testing, the composite gel (CGB) was found to promote faster and complete wound retraction. The results indicated that the gel chitosan-buriti oil has a set of properties that improve its antibacterial, antioxidant and healing action, suggesting that this material can be used to treat skin lesions.

The extensive use of organic molecules (Rhodamine B and Amitriptyline) also has contributed to environmental pollution; adsorption is a relevant method for removal of these contaminants in aqueous media. In this context, the objective of this study was to modify the surface of cellulose (Cel) with phosphoric acid and sodium tripolyphosphate to obtain a biopolymer with incorporated phosphate groups (PCel). The modification was confirmed by X-ray dispersive energy spectroscopy, solid state nuclear magnetic resonance, X-ray diffraction, and thermal analysis. The obtained material (PCel) was used as a Rhodamine B (RhB) or Amitriptyline (AmTP) adsorbent, and the highest adsorption capacity of this material was obtained at pH 3.0 (RhB) and 7.0 (AmTP) and the equilibrium time was achieved at 65 (RhB) and 150 min (AmTP). Moreover, the pseudo-first-order model best describes the kinetics of this adsorption. The experimental adsorption isotherms were adjusted to the Langmuir model, indicating that monolayer adsorption occurred and the highest experimental adsorption capacity obtained was 47.58 (RhB) and 45.52 mg g - 1 (AmTP) in PCel. The thermodynamic parameters showed that the adsorption process is exothermic and non-spontaneous, with increase of non-spontaneity with enhance of the temperature. However, PCel was efficient in removing the contaminant (RhB or AmTP) in an aqueous solution., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Organoclays have been applied as efficient adsorbents for pharmaceutical pollutants from aqueous solution. In this work, dodecylpyridinium chloride (C 12 pyCl) and hexadecylpyridinium chloride (C 16 pyCl) cationic surfactants were used for the preparation of organobentonites destined for diclofenac sodium (DFNa) adsorption, an anionic drug widely detected in wastewater. The organofunctionalization of the clay samples was performed under microwave irradiation at 50 °C for 5 min with surfactant amounts of 100% and 200% in relation to the cation exchange capacity (CEC) of the pristine bentonite. The amount of incorporated ammonium salts based on CHN elemental analysis was higher for all samples prepared with 200% of the CEC. The basal spacings of the organoclays ranged from 1.54 to 2.13 nm, indicating the entrance of organic cations into the interlayer spacing of the clay samples, and the spacing depended on the size of the alkyl organic chain. The hydrophobic character of the organobentonites was verified by thermogravimetry and infrared spectroscopy (FTIR). The adsorption isotherms showed that the drug capacity adsorption was influenced by the amount of surfactant incorporated into the bentonite, the packing density and the arrangement of the surfactants in the interlayer spacing. Zeta potential measurements of the organobentonites and FTIR analysis after drug adsorption suggested that electrostatic and nonelectrostatic interactions contributed to the mechanism of adsorption., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Microparticles (MPs) with controlled morphologies and sizes have been investigated by several researchers due to their importance in pharmaceutical, ceramic, cosmetic, and food industries to just name a few. In particular, the electrospray (ES) technique has been shown to be a viable alternative for the development of single particles with different dimensions, multiple layers, and varied morphologies. In order to adjust these properties, it is necessary to optimize different experimental parameters, such as polymer solvent, voltage, flow rate (FR), type of collectors, and distance between the collector and needle tip, which will all be highlighted in this review. Moreover, the influence and contributions of each of these parameters on the design and fabrication of polymeric MPs are described. In addition, the most common configurations of ES systems for this purpose are discussed, for instance, the main configuration of an ES system with monoaxial, coaxial, triaxial, and multi-capillary delivery. Finally, the main types of collectors employed, types of synthesized MPs and their applications specifically in the pharmaceutical and biomedical fields will be emphasized. To date, ES is a promising and versatile technology with numerous excellent applications in the pharmaceutical and biomaterials field and such MPs generated should be employed for the improved treatment of cancer, healing of bone, and other persistent medical problems.

Poly (lactic acid) (PLA) has been increasingly used in cutaneous tissue engineering due to its low cost, ease of handling, biodegradability, and biocompatibility, as well as its ability to form composites. However, these polymers possess a structure with nanoporous that mimic the cellular environment. In this study, nanocomposites are prepared using PLA and titanium dioxide (TiO 2 ) (10 and 35%-w/w) nanoparticles that also function as an active anti-scarring agent. The nanocomposites were prepared using an electrospinning technique. Three different solutions were prepared as follows: PLA, 10% PLA/TiO 2 , and 35% PLA/TiO 2 (w/w%). Electrospun PLA and PLA/TiO 2 nanocomposites were characterized morphologically, structurally, and chemically using electron scanning microscopy, transmission electron microscopy, goniometry, and X-ray diffraction. L929 fibroblast cells were used for in vitro tests. The cytotoxic effect was evaluated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. Versicam (VCAN), biglicam (BIG), interleukin-6 (IL6), interleukin-10 (IL-10), and type-1 collagen (COL1A1) genes were evaluated by RT-qPCR. In vivo tests using Wistar rats were conducted for up to 15 days. Nanofibrous fibers were obtained for all groups that did not contain residual solvents. No cytotoxic effects were observed for up to 168 h. The genes expressed showed the highest values of versican and collagen-1 ( p < 0.05) for PLA/TiO 2 nanocomposite scaffolds when compared to the control group (cells). Histological images showed that PLA at 10 and 35% w/w led to a discrete inflammatory infiltration and expression of many newly formed vessels, indicating increased metabolic activity of this tissue. To summarize, this study supported the potential of PLA/TiO 2 nanocomposites ability to reduce cutaneous scarring in scaffolds., (Copyright © 2019 Marsi, Ricci, Toniato, Vasconcellos, Elias, Silva, Furtado, Magalhães, Silva-Filho, Marciano, Zille, Webster and Lobo.)

A new adsorbent matrix (Cel-SiN) for the adsorption of the dye eosin yellow (EY) and the drug amitriptyline (AMI) from aqueous media has been synthesized. The Cel-SiN matrix was obtained via chemical modification of cellulose with (3-aminopropyl)trimethoxysilane. Successful modification was confirmed using Fourier transform infrared (FTIR) and 13 C and 29 Si solid state nuclear magnetic resonance (SSNMR) spectroscopies, thermal analysis (TG/DTG), X-ray diffraction (XRD), and elemental analysis. The effects of pH, contact time, concentration, and temperature were evaluated in batch adsorption tests. Cel-SiN efficiently adsorbed AMI and EY in aqueous media, with maximum adsorption capacities of 92.28 ± 1.34 mg g -1 for AMI (pH = 7, time =240 min, and temperature = 318 K) and 61.0 ± 0.36 mg g -1 for EY (pH = 5, time =80 min, and temperature = 298 K). The adsorption process occurs mainly via hydrogen bonding interactions for AMI and electrostatic interactions for EY., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Inorganic matrices and biopolymers have been widely used in pharmaceutical fields. They show properties such as biocompatibility, incorporation capacity, and controlled drug release, which can become more attractive if they are combined to form hybrid materials. This work proposes the synthesis of new drug delivery systems (DDS) based on magnesium phyllosilicate (Talc) obtained by the sol-gel route method, the biopolymer chitosan (Ch), and the inorganic-organic hybrid formed between this matrix (Talc + Ch), obtained using glutaraldehyde as a crosslink agent, and to study their incorporation/release capacity of amiloride as a model drug. The systems were characterized by X-ray diffraction (XRD), Therma analysis TG/DTG, and Fourier-transform infrared spectroscopy (FTIR) that supported the DDS's formation. The hybrid showed a better drug incorporation capacity compared to the precursors, with a loading of 55.74, 49.53, and 4.71 mg g -1 for Talc + Ch, Talc, and Ch, respectively. The release assays were performed on a Hanson Research SR-8 Plus dissolver using apparatus I (basket), set to guarantee the sink conditions. The in vitro release tests showed a prolongation of the release rates of this drug for at least 4 h. This result proposes that the systems implies the slow and gradual release of the active substance, favoring the maintenance of the plasma concentration within a therapeutic window.

Chitosan has become promising as a biomaterial because of its biocompatible, biodegradable nature and non-toxic. The biochemical and antioxidant properties of chitosan modified with acetylacetone and ethylenediamine (Cacen) or diethylenetriamine (Cacdien) associated with ceftazidime (F) were investigated. Chitosan was characterized using Elemental Analysis (CHN), Thermal Analysis (TG/DTG/DSC), X-Ray Diffractometry (XRD), and was investigated an in vitro hemolytic cytotoxicity test, Artemia saline larvae for toxicity and in vitro antioxidant activity by DPPH (2,2-diphenyl-1-picrylhydrazyl). The chemical modification was confirmed by CHN, XRD and TG. The Cacen, Cacdien, CacenF and CacdienF derivatives presented high percentages of nitrogen (7.6%, 7.9%, 14.1% and 19.2%, respectively), confirming the modification and drug adsorption. The average molecular weight of chitosan and its derivatives were 132 kDa, with very few variations after modification. This incorporation decreased in the crystallinity index of Cacen (7.1%) and Cacdien (4.3%), as well as the incorporation of the drug (CacenF 0.3% and CacdienF 3.4%). FTIR spectra showed bands at 1580-1654 cm -1 referring to carbonyl and imine group and bands at 3500-3300 and 1462-1264 cm -1 related to vibration and deformation the amine group. 13 C NMR spectroscopy was observed new peaks in carbonyl and imine regions (170-200 ppm). The thermal stability of the derivatives without the drug improved according to TG/DTG/DSC analysis, however there were decreased in the derivatives with the drug. The biocompatibility of the derivatives was confirmed by the low hemolytic rate (<5%), non-toxic on Artemia salina (LD 50% >3000 ppm), and significant index (1-34%) of antioxidant activity. The results demonstrated that chitosan and its derivatives are promising biomaterials., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Considering the challenges of urea administration due to the high ureolytic activity of the rumen and the importance of its use, as well as taking into account the relevance of sustainably exploiting the technological potential of biodiversity, this research studies the encapsulation of urea in different clay minerals (palygorskite (Pal), sepiolite (Sep), and Veegum ® (V)) as an alternative for use as nonprotein nitrogen (NNP) sources. A method of incorporation was developed in which the encapsulation of urea was proven by X-ray diffraction; fibrous materials, Pal and Sep had similar characteristics due to the decrease in the relative plane intensity (011), suggesting a decrease in the order of their stacking due to the presence of urea on the surface or inside channels. By contrast, V showed a 7.74° reflection shift, suggesting an increase in basal spacing from 11.45 Å in V to 14.88 Å in the sample after urea encapsulation. By thermogravimetry, it was observed that the presence of urea did not change the mass-loss profiles but only increased the percentage of loss in respective events, indicating urea incorporation in the clay minerals. These results provide a promising alternative for administering NNP sources in the ruminant diet.

Bioprinting technology has emerged as an important approach to bone and cartilage tissue engineering applications, because it allows the printing of scaffolds loaded with various components, such as cells, growth factors, or drugs. In this context, the bone has a very complex architecture containing highly vascularized and calcified tissues, while cartilage is avascular and has low cellularity and few nutrients. Owing to this complexity, the repair and regeneration of these tissues are highly challenging. Identification of the appropriate biomaterial and fabrication technologies can provide sustainable solutions to this challenge. Here, nanosized Laponite ® (Laponite is a trademark of the company BYK Additives Ltd.) has shown to be a promising material due to its unique properties such as excellent biocompatibility, facile gel formation, shear-thinning property (reversible physical crosslinking), high specific surface area, degrade into nontoxic products, and with osteoinductive properties. Even though Laponite and Laponite-based composite for 3D bioprinting application are considered as soft gels, they may therefore not be thought exhibiting sufficient mechanical strength for orthopedic applications. However, through the merging with suitable composite and, also by incorporation of crosslinking step, desired mechanical strength for orthopedic application can be obtained. In this review, recent advances and future perspective of bioprinting Laponite and Laponite composites for orthopedic applications are highlighted., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This work describes a solvent-free method for the chemical modification of cashew gum (Anacardium occidentale L.) using phthalic anhydride in different proportions with different reaction times. Four biopolymers were synthesized and characterized by FTIR, NMR, and elemental analysis. A computational chemistry study was conducted to understand better the reaction. Phthalated cashew gum was used in preparation of silver nanoparticles (AgNPs) by a conventional route, using sodium borohydride (NaBH 4 ) as reducing agent, and for green route. AgNPs were evaluated for antimicrobial activity and characterized by UV-Vis spectroscopy, FTIR, nanoparticle tracking analysis, Zeta Potential analysis, and atomic force microscopy. AgNPs produced by the green route had an average size of 51.9 nm and Zeta Potential of -55.8 mV, and AgNPs produced by the conventional method had an average size of 47.7 nm and Zeta Potential of -39.3 mV. AgNPs synthesized using phthalated cashew gum showed antimicrobial activity against Staphylococcus aureus and Escherichia coli., (Copyright © 2019. Published by Elsevier Ltd.)

Clay minerals are commonly used in pharmaceutical products as excipients and active agents. New drug vehicles based on clay minerals have been developed. In this work, sodium (BentNa), calcium (BentCa) and magnesium (BentMg) exchanged bentonites were used for the sorption of thiabendazole (TBZ), and their potential use as controlled release systems was evaluated. Pristine bentonite and exchanged bentonites were characterized by X-ray diffraction, infrared spectroscopy, thermogravimetry and transmission electron microscopy (TEM), and the influence of the different parameters such as pH, contact time and initial concentration of the drug was investigated. The maximum adsorption reached after 45 min period with 2000 mg L -1 of thiabendazole to BentNa and after 105 min with 1300 mg L -1 to BentCa and BentMg, respectively. The maximum adsorbed quantities of thiabendazole were 164.4; 152.3 and 133.3 mg g -1 for BentNa, BentCa and BentMg, respectively. The emission profiles obtained for the bentonite/drug hybrids were similar when simulated body fluids were used and these emission profiles were fitted according to the Korsmeyer-Peppas kinetic model., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Cashew gum (CG) is a biopolymer that presents a favorable chemical environment for structural modifications, which leads to more stable and resistant colloidal systems. The gum was subjected to an acetylation reaction using a fast, simple, solvent-free and low cost methodology. The derivative was characterized by infrared and NMR spectroscopy, elemental analysis, coefficient of solubility and zeta potential. The modified biopolymer was used as a platform for drug delivery systems using insulin as a model drug. Nanoparticles were developed through the technique of polyelectrolytic complexation and were characterized by size, surface charge, entrapment efficiency and gastrointestinal release profile. The nanoparticles presented size of 460 nm with a 52.5% efficiency of entrapment of insulin and the electrostatic stabilization was suggested by the zeta potential of + 30.6 mV. Sustained release of insulin was observed for up to 24 h. The results showed that acetylated cashew gum (ACG) presented potential as a vehicle for sustained oral insulin release., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

There are increasing concerns regarding the risks arising from the contamination of manipulators of antineoplastic drugs promoted by occupational exposure or even in the dosage of drugs. The present work proposes the use of an electrochemical sensor based on a biopolymer extracted from the babassu coconut (Orbignya phalerata) for the determination of an antineoplastic 5-fluorouracil (5-FU) drug as an alternative for the monitoring of these drugs. In order to reduce the cost of this sensor, a flexible gold electrode (FEAu) is proposed. The surface modification of FEAu was performed with the deposition of a casting film of the biopolymer extracted from the babassu mesocarp (BM) and modified with phthalic anhydride (BMPA). The electrochemical activity of the modified electrode was characterized by cyclic voltammetry (CV), and its morphology was observed by atomic force microscopy (AFM). The FEAu/BMPA showed a high sensitivity (8.8 μA/μmol/L) and low limit of detection (0.34 μmol/L) for the 5-FU drug in an acid medium. Electrochemical sensors developed from the babassu mesocarp may be a viable alternative for the monitoring of the 5-FU antineoplastic in pharmaceutical formulations, because in addition to being sensitive to this drug, they are constructed of a natural polymer, renewable, and abundant in nature. Graphical abstract ᅟ.

The search for natural antibacterial agents to treat diseases caused by resistant microorganisms has been gaining increasing attention. Chitosan has been studied in several areas due to its particular properties. The grafting of hydrophobic chains into the chitosan molecule, turning it amphiphilic, may improve its antimicrobial activity by increasing electrostatic interaction with the bacterial cell wall. The objective of this work was to enhance the antimicrobial activity of chitosan by the reaction of N-acylation with maleic anhydride. For this purpose, molar ratios of 1:2, 1:5 and 1:10 chitosan: anhydride were investigated, and the obtained derivatives were characterized by elemental analysis, FTIR, thermal analysis and XRD where it was possible to prove the chemical modification of chitosan. The modified materials presented excellent antibacterial action against Staphylococcus aureus and Escherichia coli, evidencing no activity against the protozoan Leishmania amazonensis. Cytotoxicity assays by the MTT analysis and hemolysis indicated that the derivatives did not show toxicity in mammalian cells. The proposed modified chitosan compounds showed to be promising for biomedical applications since they allied excellent antibacterial activity and absence of cytotoxicity., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Adsorption has been explored to minimize the pollution caused by dyes. This work relates the preparation of diethylenetriamine-modified cellulose (DetaCel) by reacting phthalic anhydride-modified cellulose (PhCel) with diethylenetriamine (Deta). Materials were characterized by Elemental Analysis and results showed a degree of incorporation of 5.55 ± 0.02 mmol of nitrogen per gram of modified material. The main bands observed for DetaCel by Fourier-Transform Infrared Spectroscospy (FTIR) were attributed to CN deformation (1330 cm -1 ) and NH stretching of amide (3400 cm -1 ), while Solid State Nuclear Magnetic Resonance of 13 C ( 13 C{ 1 H}CP-MAS NMR) showed a signal at 164.6 ppm characteristic of amide group. Crystallinity index (CrI) obtained by X-Ray Diffraction (XRD) was 74.99 (Cel), 58.64 (PhCel) and 46.12% (DetaCel). Adsorbent matrices were employed to remove methyl orange (MO) and eosin (EY) dyes in aqueous medium. Data obtained experimentally from kinetic study had a better fit to the pseudo-first order, thus the adsorption process occurs in monolayer, with MO adsorption capacity by Cel and DetaCel of 2.19 and 65.45 mg g -1 , respectively. For EY adsorption by Cel and DetaCel was 1.30 and 56.69 mg g -1 , respectively. These results suggest that DetaCel can be used as an alternative potential for removal dyes in aqueous solution., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this study, cellulose was chemically modified through the addition of the phosphorylating agent, metaphosphoric acid in order to obtain a new material (MPCel) with higher adsorptive properties than the starting material. Both materials were characterized by infrared spectroscopy, X-ray diffraction, solid-state phosphorus-31 nuclear magnetic resonance spectroscopy and thermogravimetric analysis. Maximal adsorption capacity, at 45°C for pure cellulose, was 90.5mgg -1 , at pH=10 and contact time of 40min, with experimental isotherms better adjusted to the Langmuir model. MPCel at the same temperature conditions showed contact time of 10min, pH=10, and maximal adsorption capacity of 150.0mgg -1 , being better adjusted to the Temkin model. The kinetic study of both materials followed the pseudo-second-order model. Modification successfully occurred and both adsorbents were shown able to be capable of removing the brilliant green dye, but MPCel was more efficient for purpose, when compared to the pure cellulose., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In the last decade, adsorption has been used to minimize the pollution caused by dyes, which represents a serious environmental problem. In this context, this work reports the preparation of phthalic anhydride-modified cellulose (PhCel), through the reaction of cellulose (Cel) with phthalic anhydride (Ph). The efficiency of the reaction was observed by elemental analysis, Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and thermogravimetry/derivative thermogravimetry (TG/DTG). The adsorbent matrix (Cel and PhCel) was used in the removal of crystal violet (CV) and methylene blue (MB) dyes in aqueous medium. In the kinetic study, the experimental data obtained had the best fit to the pseudo-first-order model. In general, the isotherms obtained at different temperatures had a best fit to the model proposed by Langmuir, and the CV and MB adsorption process in adsorbent matrixes can be favored strictly by hydrogen bonds and/or electrostatic interactions for Cel and electrostatic interactions for PhCel., Competing Interests: The authors declare no conflict of interest.

Although resistant starch/pectin (RS/P) films have previously displayed suitable properties for colon-specific drug delivery, nanocomposite films were developed aiming to enhance physicochemical, thermal, mechanical and barrier properties, as well as the low oral bioavailability of methotrexate (MTX). FEG-SEM micrographs of nanocomposite films showed different interaction patterns occurring among nanocellulose and RS/P. The nanofiller addition led to an increase in the thermal stability, probably due to its interaction with RS crystalline double helices. Results also displayed an improvement of the puncture strength, while barrier properties revealed a low water vapor permeability. Ex vivo bioadhesion test displayed the nanocomposites films to interact strongly with porcine gastrointestinal mucosa. In vitro drug release studies showed that the films developed enhanced the drug dissolution rates with approximately 80% of MTX release in 150min, suggesting the potential of these materials as a poor solubility drugs carrier, which constitutes an important tool for enhancing oral bioavailability., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Chitosan is a natural polymer with antibacterial property, that is biodegradable, extremely abundant and non-toxic. This study aimed to develop and characterize chitosan hydrogels in combination with nerolidol, in order to optimize the antimicrobial and healing properties. The hydrogels were prepared using a reaction of the chitosan with acetic acid solution, followed by the addition of 2 or 4% of the nerolidol. Using thermogravimetry, differential scanning calorimetry and infrared spectroscopy, the incorporation of nerolidol in the hydrogel was confirmed. Direct contact tests using hydrogels and Staphylococcus aureus showed a synergistic effect in the materials, enabling total inhibition of bacterial growth. The hydrogel containing 2% nerolidol showed excellent healing effects. The beginning of re-epithelialization and reorganization of collagen was already observed on the 7th day of treatment. The material created proofed to be promising as a healing and antibacterial agent., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The development of delivery systems using natural polymers such as gums offers distinct advantages, such as, biocompatibility, biodegradability, and cost effectiveness. Cashew gum (CG) has rheological and mucoadhesive properties that can find many applications, among which the design of delivery systems for drugs and other actives such as larvicide compounds. In this review CG is characterized from its source through to the process of purification and chemical modification highlighting its physicochemical properties and discussing its potential either for micro and nanoparticulate delivery systems. Chemical modifications of CG increase its reactivity towards the design of delivery systems, which provide a sustained release effect for larvicide compounds. The purification and, the consequent characterization of CG either original or modified are of utmost importance and is still a continuing challenge when selecting the suitable CG derivative for the delivery of larvicide compounds., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

In the last years has increased the study about the using of natural biopolymers and theirs derivatives in the removal (adsorption/incorporation) of contaminats of medium aqueous, and theirs utilization in the desorption (release) de drugs. However, there not in the literature studies about the utilization of the cellulose and cellulose phosphate in the adsorption (incorporation)/desorption (release) of the drug amitriptyline (AMI). Therefore, in this study was accomplished the synthesized of the phosphated cellulose (PC) through the reaction of pure cellulose (C) with sodium trimetaphosphate (P) under-reflux, for 4h and at 393K. The efficiency of the reaction was observed by XRD, TG/DTG, (31)P NMR and EDS. The adsorption study for the AMI in aqueous medium was carried out by varying the time, pH, concentration, temperature and ionic strength. The results showed that the PC showed a greater adsorption capacity of AMI than pure cellulose, presenting an increase of about 102.72% in the adsorption capacity of the drug by cellulose after the phosphating reaction. In desorption of drug from the surface of biomaterials was performed by varying the pH and time, where it was observed that PC showed a maximum release of 40.98% ± 0.31% at pH 7., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Composites prepared from polyaniline (PANI) and the ceramic technology of titanium dioxide (TiO2) have been proposed, however, the interaction of these materials with greater control of molecular arrangement becomes attractive in order to achieve properties not previously described or yet the optimization of those already reported. Therefore, in this study, thin hybrid films made of polyaniline (PANI), a conductive polymer, and the technological ceramic, titanium dioxide (TiO2), were prepared by the layer-by-layer (LbL) self-assembly technique. The films were characterized by cyclic voltammetry (CV), UV-VIS spectroscopy and atomic force microscopy (AFM). Aiming to improve the dispersion of the ceramic in the polymer matrix, the commercial surfactant, cetyl trimethylammonium bromide (CTAB), was used in the formation of the films. The best condition of deposition was found showing synergic interactions between the conjugated materials. The antibacterial activity of the PANI(TiO2)/CTAB films was studied and the obtained results suggest their use as antimicrobial coatings., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Clays are materials commonly used in the pharmaceutical industry, either as ingredients or as active ingredients. It was observed that when they are administered concurrently, they may interact with drugs reducing their absorption. Therefore, such interactions can be used to achieve technological and biopharmaceutical advantages, regarding the control of release. This review summarizes bibliographic (articles) and technological (patents) information on the use of systems containing clays and clay minerals in modified drug delivery. In this area, formulations such natural clay, commercial clay, synthetic clay, composites clay-polymers, nanocomposites clay-polymers, films and hidrogels composites clay-polymers are used to slow/extend or vectorize the release of drugs and consequently they increase their bioavailability. Finally, this review summarizes the fields of technology and biopharmaceutical applications, where clays are applied., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Cellulose (Cel) was first chemically modified with thionyl chloride to increase its reactivity. In the next step CelCl was reacted with ethylenediamine (CelEn) and subsequently reacted with ethylene sulfide to obtain a solid substance, CelEnEs. The modification reactions were confirmed by elemental analysis, TG, XRD, (13)C NMR and FTIR. The chemically modified biopolymer CelEnEs had an order of divalent metal sorption of Pb(2+)>Cd(2+)>Ni(2+)>Co(2+)>Cu(2+)>Zn(2+), and the maximum adsorption capacities were found to be 6.282±0.023, 5.783±0.015, 5.561±0.017, 4.694±0.013, 1.944±0.062 and 1.733±0.020 mmol g(-1), respectively. The equilibrium data were fitted to Langmuir, Freundlich and Temkin models, and in general, the experimental data best fit the Freundlich model. This newly synthesized biopolymer proved to be a chemically useful material for cations removal from aqueous solution., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

A phthalylated ion-exchange biopolymer was obtained by adding cellulose to molten phthalic anhydride in a quasi solvent-free procedure. Through this route 2.99+/-0.07 mmolg(-1) of pendant groups containing ester and carboxylic acid moieties were incorporated into the polymeric structure that was characterized by elemental analysis, solid-state carbon nuclear magnetic resonance (CP/MAS), infrared spectroscopy, X-ray diffraction, and thermogravimetry. The chemically modified polysaccharide is able to exchange cations from aqueous solution as demonstrated by batchwise methodology. The data were adjusted to a modified Langmuir equation to give 2.43+/-0.12 and 2.26+/-0.11 mmolg(-1) for divalent cobalt and nickel cations, respectively. The net thermal effects obtained from calorimetric titration measurements were also adjusted to a modified Langmuir equation, and the enthalpy of the interaction was calculated to give endothermic values of 2.11+/-0.28 and 2.50+/-0.31kJmol(-1) for these cations, respectively. The spontaneity of this ion-exchange process is reflected in negative Gibbs energy and with a contribution of positive entropic values. This set of thermodynamic data at the solid-liquid interface suggests a favorable ion-exchange process for this anchored biopolymer for cation exchange from the environment.

A new synthetic methodology route consisted in reacting the natural babassu coconut mesocarp (BCM) and babassu coconut epicarp (BCE) with ethylenesufide, for adding basic sulfur centers in pendant chains that possess high potential activity for coordinating divalent cations from aqueous solution. All biomaterials were characterized by elemental analysis, infrared (IR), (13)C NMR and thermogravimetry. The sulfur elemental analysis gave 2.00+/-0.05 and 8.67+/-0.01% for BCES and BCMS, which correspond to 0.60+/-0.01 and 2.71+/-0.01 mmol of this element per each gram of BCE and BCM, to confer a degree of functionalization of 20.2+/-0.07 and 86.7+/-0.01 mg g(-1). This synthesis enabled from IR weak SH band at 2544 cm(-1) due to the incorporation of the reagent into the structure. The basic centers favor copper sorption with increasing pH from 2 to 6 observed by a batchwise methodology and the data obtained from the chosen pH 6 were adjusted to Freundlich and Langmuir models, favoring fit for the latter equation. The kinetics of sorption was established at 30 min for both biopolymers with a pseudo-second-order model.

Pentane-2,4-dione (acetylacetone) molecules were covalently incorporated under several different conditions to ethylene-1,2-diamine (en)-modified cellulose, using polar solvents or without solvents. The quantitative amount of en incorporated was given from 0.37+/-0.01 to 3.03+/-0.01 mmol of nitrogen per gram of cellulose, depending on the synthetic routes and after Schiff base formation this percentage was reduced by 1.38-6.12%. The synthetic routes indicated that lower solvent volumes produced higher amounts of en incorporation. However, the highest degree of pendant groups on the polymeric cellulose structure was obtained from a solvent-free reaction route. This procedure was applied for synthesizing all Schiff bases, causing a decrease in the amount of nitrogen. The available basic centers on the best covalently bonded biopolymer were investigated for adsorption of divalent copper, cobalt, nickel, and zinc from aqueous solution, with a capacity order of Cu2+ > Co2+ > Ni2+ > Zn2+.

Chitosan (Ch) was chemically modified with ethylenesulfide (Es) under solvent-free conditions to give (ChEs), displaying a high content of thiol groups due to opening of the three member cyclic reagent. Elemental analysis showed a decrease in nitrogen content. This result indicated the incorporation of two ethylenesulfide molecules for each unit of the polymeric structure of the precursor biopolymer. Infrared spectroscopy, thermogravimetry, and (13)C NMR in the solid state demonstrated the effectiveness of the reaction, with signals at 30 ppm for ChEs due to the change in the methylene group environment. Divalent metal uptake by chemically modified biopolymer gave the order Cu>Ni>Co>Zn, reflecting the corresponding acidity of these cations in bonding to the sulfur and the basic nitrogen atoms available on the pendant chains. The equilibrium data were fitted to Freundlich, Temkin, and Langmuir models. The maximum monolayer adsorption capacity for the cations was found to be 1.54+/-0.02, 1.25+/-0.03, 1.13+/-0.01, and 0.83+/-0.03 mmol g(-1), respectively. The Langmuir model best explained the cation-sulfur bond interactions at the solid-liquid interface. The thermodynamics for these interactions gave exothermic enthalpic values of -43.02+/-0.03, -28.72+/-0.02, -26.27+/-0.04, and -17.32+/-0.02 kJ mol(-1), respectively. The spontaneity of the systems is given by negative Gibbs free energies of -31.2+/-0.1, -32.7+/-0.1, -31.7+/-0.1, and -32.2+/-0.1 kJ mol(-1), respectively, in spite of the unfavorable negative entropic values of -39+/-1, -13+/-1, -18+/-1, and -49+/-1 J K(-1)mol(-1) due to solvent ordering in the course of complexation. This newly synthesized biopolymer is presented as a chemically useful material for cation removal from aqueous solution.

Extracted babassu coconut (Orbignya speciosa) mesocarp (BCM) was applied as a biosorbent for aqueous Blue Remazol R160 (BR 160), Rubi S2G (R S2G), Red Remazol 5R (RR 5), Violet Remazol 5R (VR 5) and Indanthrene Olive Green (IOG) dye solutions. The natural sorbent was processed batchwise while varying several system parameters such as stirring time, pH and temperature. The interactions were assayed with respect to both pseudo-first-order and second-order reaction kinetics, with the latter the more suitable kinetic model. The maximum adsorption was obtained at pH 1.0 for all dyes due to available anionic groups attached to the structures, which can be justified by pH(pzc) 6.7 for the biosorbent BCM. The ability of babassu coconut mesocarp to adsorb dyes gave the order R S2G>VR 5>BR 160>IOG>RR 5, which data were best fit to Freundlich model, but did not well-adjusted for all dyes. The dye/biopolymer interactions at the solid/liquid interface are all spontaneous as given by free Gibbs energy, with exothermic enthalpic values of -26.1, -15.8, -17.8, -15.8 and -23.7 kJ mol(-1) for BR 160, R S2G, RR 5, IOG and VR 5, respectively. In spite of the negative entropic values contribution, the set of thermodynamic data is favorable for all dyes removal. However, the results pointed to the effectiveness of the mesocarp of babassu coconut as a biosorbent for removing textile dyes from aqueous solutions.

Cellulose was first modified with thionyl chloride, giving 99% substitution at C6, and then reacted with ethylene-1,2-diamine to produce 6-(2'-aminoethylamino)-6-deoxy-cellulose. From the 8.5% of nitrogen incorporated in the polysaccharide backbone, the amount of ethylene-1,2-diamine anchored per gram of modified cellulose was determined to be 3.03+/-0.01mmol. This chemically immobilized surface was characterized by FTIR, TG, (13)C NMR, and SEM techniques. The available basic nitrogen centers covalently bonded to the biopolymer skeleton were studied for copper, cobalt, nickel, and zinc adsorption from aqueous solutions and the respective thermal adsorption effects were determined by calorimetric titration. The ability to adsorb cations gave a capacity order of Co(2+)>Cu(2+)>Zn(2+)>Ni(2+) with affinities of 1.91+/-0.07, 1.32+/-0.07, 1.31+/-0.02, and 1.08+/-0.04mmol/g, respectively. The net thermal effects obtained from calorimetric titration measurements were adjusted to a modified Langmuir equation and the enthalpy of the interaction was calculated to give the following exothermic values: -20.8+/-0.05, -11.72+/-0.03, -7.32+/-0.01, and -6.27+/-0.02kJ/mol for Co(2+), Cu(2+), Zn(2+), and Ni(2+), respectively. With the exception of the entropic value for copper, the other thermodynamic data for these systems are favorable for cation adsorption from aqueous solutions at the solid/liquid interface, suggesting the use of this anchored biopolymer for cation removal from the environment.

Hydroxyapatite surface silylation with organosilane derivatives (H3CO)3SiR, R being the corresponding organic moieties CH2CH2CH2NH2, CH2CH2CH2NHCH2CH2NH2, and CH2CH2CH2NHCH2CH2NHCH2CH2NH2, was carried out to yield organofunctionalized nanomaterials, named HApR1, HApR2, and HApR3, respectively. The products were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction, thermogravimetry, and (1P and 13C NMR in the solid state. The amounts of groups grafted onto surfaces were 0.75+/-0.05, 2.35+/-0.14, and 2.48+/-0.18 mmolg(-1) for HApRx (x=1,2,3) surfaces, respectively. Linear correlations between elemental analysis, mass loss, (31)P chemical shift data, and the characteristics of the chain of each alkoxysilane were observed. The organic basic centers distributed onto the external surface have the ability to adsorb divalent copper and cobalt cations from aqueous solution. The degree of adsorption obtained from batchwise processes showed the best performance of these synthesized nanomaterials when compared with the pristine hydroxyapatite.

Multiple calcifying hyperplastic dental follicles is a rare condition characterized by multiple unerupted teeth with abundant calcifications and rests of odontogenic epithelium in their enlarged dental follicles. This article describes an additional example of this condition.