Search

For homoleptic 18-electron complex hydrides, an inverse linear correlation has been established between the T–deuterium bond length (T = Fe, Co, Ni) and the average electronegativity of the metal countercations. This relationship can be further employed towards aiding structural solutions and predicting physical properties of novel complex transition metal hydrides.

Synthesis of halide free rare earth metal (RE) borohydride complexes is demonstrated by the metathesis reaction of trivalent RE metal chlorides and LiBH4 in ethereal solution, combined with solvent extraction using dimethyl sulfide. The crystal structures of Eu(BH4)2 and Sm(BH4)2 are orthorhombic (space group Pbcn) and are shown to be related to the structure of Sr(BH4)2 by Rietveld refinement. Further, the thermal decomposition of these materials has been studied by in situ synchrotron radiation powder X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, mass spectrometry and Sieverts measurements. The decomposition pathway of these solvent extracted materials has been compared against materials prepared by mechano-chemistry, the process of which is simplified by the absence of chloride impurities.

The regeneration pathway of sodium alanate has been studied in detail by in situ synchrotron powder X-ray diffraction (SR-XRD) and powder neutron diffraction (PND). Rietveld refinement of the data has accurately determined the composition of all crystalline phases during the reaction process and shows definitively that Al initially reacts with NaH to form Na3AlH6, followed by the formation of NaAlH4 (before the total consumption of NaH) in two indiscrete reactions. During hydrogenation, an expansion of 0.6% of the Na3AlH6 unit cell is observed indicating towards the inclusion of Ti within the crystal lattice. This study promotes the recent development of next-generation sample holders and detectors that now enable the in situ diffraction measurement of hydrogen storage materials under relatively high gas pressures (>100 bar) and temperatures. This journal is

Two types of calix[4]arene derived hosts for anions with, respectively, 1,3-alternate and cone conformations have been prepared; the 1,3-alternate system binds dicarboxylate anions in a ditopic manner while the cone compounds are deprotonated by carboxylates.

The structures adopted by a range of complexes AlH3·nL, (n = 1 or 2), have been explored in detail to identify the factors that determine the value of n, and whether a monomeric or dimeric arrangement is preferred for the 1 : 1 complexes. Single-crystal X-ray diffraction, vibrational and NMR spectroscopies, and thermal analysis data have been collected, DFT calculations have been performed for AlH3·nL species, and pK(a) values have been collated for a series of amine and phosphine ligands L. The pK(a) of the ligand L exerts an important influence on the type of complex formed: as the basicity of L increases, a monomeric structure is favoured over a dimeric arrangement. Dimeric amine complexes form if pK(a)9.76, while monomeric complexes are preferred when pK(a)9.99. The steric requirements of L also influence the structural preference: bulky ligands with large cone angles (163°) tend to favour formation of monomers, while smaller cone angles (125°) encourage the formation of dimeric or 1 : 2 adducts. The steric bulk of the ligand appears to be more important for phosphine complexes, with smaller phosphines being unable to stabilise the complex at ambient temperatures even through dimerisation. Raman spectroscopy and DFT calculations have been particularly helpful in elucidating the stoichiometric preferences of complexes that have been contentious; these include AlH3·NMe2Et, AlH3·NMe3 and AlH3·nEt2O.

27Al and 7Li wide-line NMR spectroscopy incorporating a high pressure NMR apparatus has allowed the first in situ study of the solvent mediated, direct synthesis of an alanate, thus overcoming the dearth of analytical techniques available to study phenomena occurring in a pressurised slurry. In contrast to the decomposition reaction, the elucidated hydrogenation pathway does not proceed through the hexahydride intermediate.

NaBH4 has long been identified as a viable hydrogen-storage material due to a theoretical gravimetric H2 capacity of 10.6 wt %. Because of the high enthalpy of decomposition of 108 ± 3 kJ mol–1, thermal decomposition of the pristine material does not occur until at least 500 °C, and thus NaBH4 has yet to be utilized in hydrogen-storage processes. In this study, NaBH4 has been milled with a variety of Ni-containing additives to investigate the effects on the temperatures required for thermal desorption of H2 by temperature-programmed desorption (TPD) measurements and the products characterized by powder X-ray diffraction (PXD). Ni-containing additives have been determined to significantly enhance the thermal desorption of H2 by at least 60 °C (Ni (65 wt %) on Si/Al2O3). PCT cycling experiments have been conducted to ascertain their effects on the reversible hydrogenation of the milled NaBH4. PXD analysis indicates that Ni reacts with B evolved during thermal decomposition to form NixBy species including Ni...

An in situ thermal desorption study of solvated aluminum hydride (alane) by transmission electron microscopy and selected area diffraction has permitted characterisation of the structural and morphological changes during desorption of solvent and hydrogen in real-time; this powerful technique for studying hydrogen storage materials complements several others already employed.

First-principles calculations were employed to investigate hypothetical complex hydrides (M,M′)4FeH8 (M = Na, Li; M′=Mg, Zn, Y, Al). Besides complex anion [FeH6]4–, these materials contain two H– anions, which raise the total anionic charge state from tetravalent to hexavalent, and thereby significantly increasing the number of combinations of countercations. We have determined that similar to complex hydrides (M,M′)2FeH6 containing only [FeH6]4–, the thermodynamic stability is tuned by the average cation electronegativity. Thus, the chemical flexibility provided by incorporating H– enhances the tunability of thermodynamic stability, which will be beneficial in obtaining optimal stability for hydrogen storage materials.

The direct synthesis of NaAlH4 has been studied, for the first time, by in situ (27)Al and (23)Na wide-line NMR spectroscopy using high pressure NMR apparatus. Na3AlH6 formation is observed within two minutes of hydrogen addition, while NaAlH4 is detected after a total of four minutes. This indicates the formation of the hexahydride does not proceed to completion before the formation of the tetrahydride ensues.

The AlH3 adducts of TMEDA (Me2NCH2CH2NMe2), DIOX (O(CH2CH2)2O), TEA (Et3N), BDMA (PhNMe2), and TMPDA (Me2NCH2CH2CH2NMe2) have each been characterised by single-crystal X-ray diffraction at low temperature, by (1)H, (14)N and (27)Al NMR and FT-Raman and FT-IR spectroscopy, and by DFT calculations and elemental analysis. Hence, AlH3·TMEDA and AlH3·DIOX are both shown to adopt a polymeric structure, with the bidentate ligand bridging two Al centres, each of which adopts a trigonal bipyramidal (TBP) arrangement with equatorial hydride moieties. The 1 : 2 adduct AlH3·2BDMA is monomeric but the geometry at the Al centre resembles closely that of the polymeric TMEDA and DIOX complexes. AlH3·TEA alone adopts a monomeric structure in which the Al centre is tetrahedrally coordinated by three hydride and one amine ligand. The Al-L bond distance of 2.0240(17) Å for AlH3·TEA is the shortest of all the complexes in this study, and AlH3·TEA also possesses the shortest Al-H bonds. AlH3·DIOX has the shortest Al-L bond distance of the polymeric species (2.107(14) Å) on account of the higher electronegativity of the oxygen donor. The structure of AlH3·TMEDA was determined at low temperature (monoclinic space group P2(1)/c), and salient features are compared to the previous room temperature study, for which a highly disordered orthorhombic space group (P2(1)2(1)2(1)) was reported. The polymeric structures appear to be stabilised by a number of intermolecular interactions and unconventional hydrogen bonds; these are most pronounced for AlH3·DIOX, whose chains are connected by highly directional C-H···H-Al bonding with an H···H distance of 2.32(6) Å.