Search

The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in terms of cost, power, and size. An emerging technology to realize massive MIMO receivers of reduced cost and power consumption is based on dynamic metasurface antennas (DMAs), which inherently implement controllable compression in acquisition. In this work we study the application of DMAs for MIMO-OFDM receivers operating with bit-constrained analog-to-digital converters (ADCs). We present a model for DMAs which accounts for the configurable frequency selective profile of its metamaterial elements, resulting in a spectrally flexible hybrid structure. We then exploit previous results in task-based quantization to show how DMAs can be configured to improve recovery in the presence of constrained ADCs, and propose methods for adjusting the DMA parameters based on channel state information. Our numerical results demonstrate that the DMA-based receiver is capable of accurately recovering OFDM signals. In particular, we show that by properly exploiting the spectral diversity of DMAs, notable performance gains are obtained over existing designs of conventional hybrid architectures, demonstrating the potential of DMAs for MIMO-OFDM setups in realizing high performance massive antenna arrays of reduced cost and power consumption.

The order-of-magnitude increase in the dimension of antenna arrays, which forms extra-large-scale massive multiple-input-multiple-output (MIMO) systems, enables substantial improvement in spectral efficiency, energy efficiency, and spatial resolution. However, practical challenges, such as excessive computational complexity and excess of baseband data to be transferred and processed, prohibit the use of centralized processing. A promising solution is to distribute baseband data from disjoint subsets of antennas into parallel processing procedures coordinated by a central processing unit. This solution is called subarray-based architecture. In this work, we extend the application of expectation propagation (EP) principle, which effectively balances performance and practical feasibility in conventional centralized MIMO detector design, to fit the subarray-based architecture. Analytical results confirm the convergence of the proposed iterative procedure and that the proposed detector asymptotically approximates Bayesian optimal performance under certain conditions. The proposed subarray-based EP detector is reduced to centralized EP detector when only one subarray exists. In addition, we propose additional strategies for further reducing the complexity and overhead of the information exchange between parallel subarrays and the central processing unit to facilitate the practical implementation of the proposed detector. Simulation results demonstrate that the proposed detector achieves numerical stability within few iterations and outperforms its counterparts., Comment: 15 pages, 16 figures, accepted by IEEE Transactions on Wireless Communications for publication

3D object reconstruction is a fundamental task of many robotics and AI problems. With the aid of deep convolutional neural networks (CNNs), 3D object reconstruction has witnessed a significant progress in recent years. However, possibly due to the prohibitively high dimension of the 3D object space, the results from deep CNNs are often prone to missing some shape details. In this paper, we present an approach which aims to preserve more shape details and improve the reconstruction quality. The key idea of our method is to leverage object mask and pose estimation from CNNs to assist the 3D shape learning by constructing a probabilistic single-view visual hull inside of the network. Our method works by first predicting a coarse shape as well as the object pose and silhouette using CNNs, followed by a novel 3D refinement CNN which refines the coarse shapes using the constructed probabilistic visual hulls. Experiment on both synthetic data and real images show that embedding a single-view visual hull for shape refinement can significantly improve the reconstruction quality by recovering more shapes details and improving shape consistency with the input image., Comment: 11 pages

The use of low-resolution analog-to-digital converters (ADCs) can significantly reduce power consumption and hardware cost. However, their resulting severe nonlinear distortion makes reliable data transmission challenging. For orthogonal frequency division multiplexing (OFDM) transmission, the orthogonality among subcarriers is destroyed. This invalidates conventional OFDM receivers relying heavily on this orthogonality. In this study, we move on to quantized OFDM (Q-OFDM) prototyping implementation based on our previous achievement in optimal Q-OFDM detection. First, we propose a novel Q-OFDM channel estimator by extending the generalized Turbo (GTurbo) framework formerly applied for optimal detection. Specifically, we integrate a type of robust linear OFDM channel estimator into the original GTurbo framework and derive its corresponding extrinsic information to guarantee its convergence. We also propose feasible schemes for automatic gain control, noise power estimation, and synchronization. Combined with the proposed inference algorithms, we develop an efficient Q-OFDM receiver architecture. Furthermore, we construct a proof-of-concept prototyping system and conduct over-the-air (OTA) experiments to examine its feasibility and reliability. This is the first work that focuses on both algorithm design and system implementation in the field of low-resolution quantization communication. The results of the numerical simulation and OTA experiment demonstrate that reliable data transmission can be achieved., Comment: 14 pages, 17 figures; accepted by IEEE Transactions on Communications

Machine learning (ML) has been widely applied to the upper layers of wireless communication systems for various purposes, such as deployment of cognitive radio and communication network. However, its application to the physical layer is hampered by sophisticated channel environments and limited learning ability of conventional ML algorithms. Deep learning (DL) has been recently applied for many fields, such as computer vision and natural language processing, given its expressive capacity and convenient optimization capability. The potential application of DL to the physical layer has also been increasingly recognized because of the new features for future communications, such as complex scenarios with unknown channel models, high speed and accurate processing requirements; these features challenge conventional communication theories. This paper presents a comprehensive overview of the emerging studies on DL-based physical layer processing, including leveraging DL to redesign a module of the conventional communication system (for modulation recognition, channel decoding, and detection) and replace the communication system with a radically new architecture based on an autoencoder. These DL-based methods show promising performance improvements but have certain limitations, such as lack of solid analytical tools and use of architectures that are specifically designed for communication and implementation research, thereby motivating future research in this field., Comment: Accepted by China Communications 14 pages, 19 figures

Orthogonal frequency division multiplexing (OFDM) has been widely used in communication systems operating in the millimeter wave (mmWave) band to combat frequency-selective fading and achieve multi-Gbps transmissions, such as IEEE 802.15.3c and IEEE 802.11ad. For mmWave systems with ultra high sampling rate requirements, the use of low-resolution analog-to-digital converters (ADCs) (i.e., 1-3 bits) ensures an acceptable level of power consumption and system costs. However, orthogonality among sub-channels in the OFDM system cannot be maintained because of the severe non-linearity caused by low-resolution ADC, which renders the design of data detector challenging. In this study, we develop an efficient algorithm for optimal data detection in the mmWave OFDM system with low-resolution ADCs. The analytical performance of the proposed detector is derived and verified to achieve the fundamental limit of the Bayesian optimal design. On the basis of the derived analytical expression, we further propose a power allocation (PA) scheme that seeks to minimize the average symbol error rate. In addition to the optimal data detector, we also develop a feasible channel estimation method, which can provide high-quality channel state information without significant pilot overhead. Simulation results confirm the accuracy of our analysis and illustrate that the performance of the proposed detector in conjunction with the proposed PA scheme is close to the optimal performance of the OFDM system with infinite-resolution ADC., Comment: 32 pages, 12 figures; accepted by IEEE JSAC special issue on millimeter wave communications for future mobile networks