Search

In this paper, we analyze the average transmit power of non-orthogonal multiple access (NOMA) systems with requirements on the user signal-to-interference-plus-noise-ratios (SINRs), and propose new transmission schemes and user clustering algorithms to reduce the average transmit power. First, for systems with a multi-antenna base station (BS) and a single cluster of two single-antenna users, the average transmit power with SINR constraints is analyzed for channel-alignment-based NOMA and multi-user beamforming with matched filter (MF) beamformers. Properties of the average transmit power are obtained with respect to the alignment threshold and the BS antenna number. It is shown that using either scheme alone without the alignment consideration leads to unbounded average transmit power. With the observation that the two schemes have distinct preferred regions of channel alignment, hybrid transmissions of NOMA and multi-user beamforming are proposed for power saving and outage avoidance. Further, for systems with more than two users, clustering algorithms are developed to group users into multiple two-user clusters with respect to the minimization of the total transmit power for NOMA and hybrid schemes. Simulation results are provided to validate our theoretical results. In addition, the proposed transmission schemes and clustering algorithms are shown to achieve significant saving in the average transmit power.

This letter proposes a modified non-orthogonal multiple-access (NOMA) scheme for systems with a multi-antenna base station (BS) and two single-antenna users, where NOMA transmissions are conducted only when the absolute correlation coefficient (CC) between the user channels exceeds a threshold and the BS uses matched-filter (MF) precoding along the user with the stronger average channel gain. We derive the average minimal transmit power to guarantee the signal-to-interference-plus-noise-ratio (SINR) levels of both users. Our results show that the average minimal power grows logarithmically in the reciprocal of the CC threshold and a non-zero threshold is necessary for the modified NOMA scheme to have finite average minimal transmit power. Further, for the massive MIMO scenario, we derive the scaling laws of the average transmit power and outage probability with respect to the antenna numbers, as well as their tradeoff law. Simulation results are shown to validate our theoretical results., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

This paper analyzes the performance of multi-user full-duplex (FD) massive multiple-input multiple-output (MIMO) systems with low resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) under Rician fading channels. The maximum ratio combining and maximum ratio transmission are used at the base station (BS) for the uplink and downlink, respectively. By leveraging on the additive quantization noise model, tight closed-form approximations of the uplink and downlink achievable rates are obtained for both perfect and imperfect channel state information cases. The results show the impact of the Rician $K$ -factor, ADC/DAC resolution, loop interference, and inter-user interference of the systems. In addition, we adopt the power scaling law to show that to achieve a fixed level of the signal-to-interference-plus-noise ratio, the transmit power of each user and the BS can be scaled down proportionally to the inverse of the BS antenna number. Moreover, we compare the performance of the FD mode and the half-duplex mode, and study the trade-off between the achievable rate and BS energy efficiency. Numerical results show that the use of low-resolution ADCs/DACs can significantly improve the BS energy efficiency with only small reduction in the achievable rate of the FD system.

This letter is on the multi-user massive multi-input multi-output (MIMO) uplink with the mixed analog-to-digital converter (ADC) architecture and the zero-forcing (ZF) receiver at the base station (BS). Under imperfect channel state information (CSI), a closed-form approximation of the spectral efficiency (SE) is derived for a general resolution profile. Further, simplified SE results are provided for two common asymptotic massive MIMO scenarios. In the SE analysis, to overcome the difficulty induced by the mixed-ADC structure, new techniques are developed in calculating the average noise powers caused by the CSI error and the quantization.

Massive multiple-input-multiple-output (MIMO) system inevitably faces the hardware cost and energy efficiency problem due to its large number of antennas at the base station (BS). The use of low-resolution analog-to-digital converters (ADCs), e.g., typical 1-bit ADCs, can effectively reduce the system cost. In this paper, we consider a massive MIMO uplink with ternary/three level ADCs. The design of typical linear combiner based detectors is given along with their analytical symbol-error-rate (SER) performance results. Analytical and simulation results show that 1) ternary ADCs can effectively compensate the SER performance gap between 1-bit and full-resolution ADCs; 2) optimal design of ternary ADCs for SER minimization can be referred to the existing design for quantization error minimization; 3) ternary ADCs perform better than 2-bit ADCs in energy efficiency. Thus, for some low-cost scenarios where implementing 2-bit ADCs for each antenna in massive MIMO may be even unaffordable, ternary ADC can be a good choice.

Extreme learning machine (ELM) is commonly adopted and best known for its extremely fast learning capability and notable performance. In this paper, a multiple split-complex ELM (Multi-SCELM) regressor based equalization and detection method is proposed for OFDM systems. This method combines ELM regressors for equalization and minimum-distance based symbol slicers for symbol detection. Furthermore, the proposed Multi-SCELM is extended to fully complex ELM (CELM) for channel equalization and detection. Simulations demonstrate that compared to existing ELM based methods, the proposed one owns the advantages of lower computational complexity, higher detection accuracy, stronger activation function adaptability, shorter training length and better subchannel number adaptability especially in strong frequency selective channels. Compared to the benchmark MMSE method, the proposed method has minor performance degradation but significant reduction in computational complexity.

In this letter, for outage performance orientated large intelligent surfaces (LISs)-assisted point to point wireless systems with severely blocked direct link and Rayleigh fading channels,we first propose a jointly interleaved training and transmission design. Then a semi-closed form expression is derived for the average training overhead. And it is shown to be upper bounded by the minimum between the LIS size and a value explicitly dependent on the target receiver signal-to-noise-ratio (SNR). The upper bound gives the condition on the target SNR for achieving overhead saving compared to the full CSI scheme. And the overhead saving increases linearlywith the LIS size for constant target SNR. Non-negligible overhead saving is still available even though one increases the target SNR with larger LIS, e.g., as the square of the LIS size for fully exploiting the beamforming gain. Finally, we indicate the impact of practical phase quantization on the training and feedback overhead. Simulations verify these results and show that the proposed scheme can significantly reduce the training overhead without performance loss compared to the full CSI scheme.

In this paper, a deep learning (DL)-based sphere decoding algorithm is proposed, where the radius of the decoding hypersphere is learned by a deep neural network (DNN). The performance achieved by the proposed algorithm is very close to the optimal maximum likelihood decoding (MLD) over a wide range of signal-to-noise ratios (SNRs), while the computational complexity, compared to existing sphere decoding variants, is significantly reduced. This improvement is attributed to the DNN’s ability of intelligently learning the radius of the hypersphere used in decoding. The expected complexity of the proposed DL-based algorithm is analytically derived and compared with existing ones. It is shown that the number of lattice points inside the decoding hypersphere drastically reduces in the DL-based algorithm in both the average and worst-case senses. The effectiveness of the proposed algorithm is shown through the simulation for high-dimensional multiple-input multiple-output (MIMO) systems, using high-order modulations.

We address the problem of secure wireless communications over an untrusted full-duplex (FD) relay based on the source jamming scheme. The optimal power allocation between the confidential signal and the jamming signal is derived to maximize the secrecy rate. Then, the corresponding secrecy outage probability (SOP) and the average secrecy rate (ASR) are analyzed. A tight approximation and an asymptotic result are further obtained for the single-antenna destination case both in simple forms. The large-antenna destination case is also analyzed rigorously. Further discussion reveals that transmit-power dependent self-interference has significant negative impact on the secrecy performance.

An uplink multi-user massive Multi-input multi-output (MIMO) system is considered with a mixed Analog-to-digital converter (ADC) architecture under imperfect Channel state information (CSI). A closed-form approximation for the Spectral efficiency (SE) is derived for a general mixed ADC structure with any resolution profile. To achieve a balance between the SE and receive Energy efficiency (EE) of the system, the ADC resolution profile optimization problem that maximizes a linear combination of the SE and the Base station (BS) receive power consumption is formulated. An algorithm based on gradient search is proposed whose complexity is linear in the number of BS antennas. Numerical results verify that the proposed ADC resolution design largely outperforms the two-level structure especially in the lower SE region and provides more choices than the uniform-ADC architecture for resolving the SE-EE tradeoff.

This paper is on abnormality detection, where the observed data under the normal condition is assumed to be independent and identically distributed (i.i.d.) and follow the generalized Gaussian distribution (GGD) with shape parameter greater than 1. The Kullback–Leibler divergence (KLD) between the estimated GGD of the observed data and the normal one is used as the test statistic. An analytical expression of the KLD is derived under the normal condition when the number of samples is large; then, two algorithms with constant and adaptive thresholds are proposed. Extensive simulated and industrial case studies are conducted to verify the analytical results and to show the effectiveness of the proposed algorithms.

This paper investigates the relay selection (RS) problem for multi-hop full-duplex relay networks where multiple source–destination (SD) pairs compete for the same pool of relays, under the attack of multiple eavesdroppers. To enhance the physical-layer security, within a given coherence time, our objective is to jointly assign the available relays at each hop to different SD pairs to maximize the minimum secrecy rate among all pairs. Two RS schemes, optimal RS and suboptimal RS (SRS), are proposed for two-hop networks based on global channel state information (CSI) and only SD pairs CSI, respectively. Since all users can communicate within the same coherence time, our joint RS schemes are important for the user-fairness and ultra-reliable low-latency communications. To evaluate the performance, the exact secrecy outage probability of the SRS scheme is derived under two residual self-interference models. The asymptotic analysis shows that the SRS scheme achieves full diversity. A relay-based jamming scheme is also proposed by using unassigned relays for user communications. Finally, the two-hop RS schemes and the analysis are extended to the general multi-hop network with multiple eavesdroppers. The numerical results reveal interesting fundamental trends where the proposed schemes can significantly enhance the secrecy performance.

Nowadays, Leakage detection is of great importance as pipelines are the major means of transporting hydrocarbon fluids and gases. In this paper, a novel two-stage detection method is introduced to differentiate normal, leakage and transient conditions of pipelines. In this method, feature vectors are constructed from the flow difference and pressure using leakage characteristics, and are normalized with the modified hyperbolic-tangent estimator. An artificial neural network is used in the first stage of detection to differentiate normal and abnormal conditions with the feature vectors as the inputs. In the second detection stage, a simple logic is used to distinguish leakage and transient from abnormal time-windows. In addition, a pre-set leak-size tolerance is used to trigger alarms for detected leakage time-windows. The results for the cases of using different machine learning methods and varying leak-size tolerances are given. The method has been shown to have higher detection performance and less false alarms in comparison with the line balance and Kantorovich distance methods.

This paper investigates the power consumption and user-clustering of a multi-cluster multi-input single-output non-orthogonal multiple access (MISO-NOMA) systems. First, we derive the average transmit power of a two-user cluster, given constraints on the signal-to-interference-plus-noise-ratios (SINRs) of users and a threshold on the alignment of channel directions. Then the asymptotic behavior of the average transmit power under several scenarios are studied to show the scaling of the transmit power with respect to the base station (BS) antenna number and the alignment threshold. After that, a two-layer user clustering algorithm is proposed to improve the power efficiency by selecting the head and tail users in each cluster sequentially. Simulation results validate the correctness of our theoretical results. Further, the proposed user-cluster algorithm is shown to achieve significant saving on the transmit power.

In this paper, a decision-directed (DD)-channel estimation (CE) algorithm by employing deep learning (DL) is proposed for high mobility vehicular environments. The proposed algorithm relies on DL for channel prediction without prior knowledge about channel statistics, such as the channel covariance matrix and its time variation. Therefore, it does not require any prior Doppler rate estimation, which is highly complicated in high mobility environments. Based on the performed simulations, comparing to the Kalman filter-based DD-CE algorithm, our DL-based algorithm results in more reliable communications. It has been shown that comparing to the minimum mean square error (MMSE)-based DD-CE algorithm, our DL-based algorithm imposes much lower complexity to the system and the performance degradation is small compared to the MMSE-based DD-CE algorithm that requires the exact value of the Doppler rate.

To support reliable transmission of data at high rate in time-varying fading channels, adaptive transmission is required, where transmitter and receiver adjust their transmission and reception mode to the dynamics of the channel. The receiver, based on its channel estimation and prediction, decides the optimal link adaptation and feeds this back to the transmitter. In this paper, we develop a deep learning (DL)-based link adaptation algorithm for highly dynamic communication links, where adaptive transmission parameters are decided for $l\gt1$ forward time steps without a priori knowledge on channel statistics. Compared to conventional solutions, our approach reduces the feedback requirements from the receiver to the transmitter by a factor of l which significantly reduces the complexity. This achievement comes at no additional cost on the data rate and/or bit error rate.

This paper analyzes the outage probability for the uplink of multi-user massive multi-input-multi-output systems with a mixed analog-to-digital converter (ADC) architecture, in which the base station (BS) is equipped with ADCs of different resolution levels. Maximum-ratio combining (MRC) is used at the BS. By deriving the distribution of the user-interference power and statistical properties of other components in the signal-to-interference-plus-noise-ratio (SINR), a tight closed-form approximation for the outage probability is obtained for a general mixed ADC structure with any resolution profile. Then, two methods for the ADC resolution profile optimization are proposed considering both the outage probability and the BS energy consumption. The first method uses low-complexity incremental search to minimize the BS energy consumption for given outage probability constraint. The other method is based on multi-objective optimization and adopts a discrete-variation of the classic non-dominated sorting genetic algorithm II (NSGA-II). Numerical results are presented to validate the outage probability results. Furthermore, it is shown that the two proposed mixed-resolution ADC designs largely outperform a two-level ADC structure and provide more choices than the uniform ADC structure for resolving the tradeoff between outage probability and BS energy consumption.

Zero-forcing (ZF) precoding plays an important role for massive MIMO downlink due to its near optimal performance. However, the high computation cost of the involved matrix inversion hinders its application. In this paper, we adopt the first order Neumann series (NS) for a low-complexity approximation. By introducing a relaxation parameter jointly with one selected user's interference to others into the precondition matrix, we propose the identity-plus-column NS (ICNS) method. By further exploiting the multi-user diversity gain via choosing the user with the largest interference to others, the ordered ICNS method is also proposed. Moreover, the sum-rate approximations of the proposed ICNS method and the competitive existing identity matrix based NS (INS) method are derived in closed-form, based on which the performance loss of ICNS due to inversion approximation compared with ideal ZF and its performance gain over INS are explicitly analyzed for three typical massive MIMO scenarios. Finally, simulations verify our analytical results and also show that the proposed two designs achieve better performance-complexity tradeoff than ideal ZF and existing low-complexity ZF precodings for practical large antenna number, correlated channels and not-so-small loading factor., Comment: 30 Pages, 9 figures, submitted to IEEE Transactions on Communications

In this paper, we study the beam-based training design jointly with the transmission design for hybrid massive antenna single-user (SU) and multiple-user (MU) systems where outage probability is adopted as the performance measure. For SU systems, we propose an interleaved training design to concatenate the feedback and training procedures, thus making the training length adaptive to the channel realization. Exact analytical expressions are derived for the average training length and the outage probability of the proposed interleaved training. For MU systems, we propose a joint design for the beam-based interleaved training, beam assignment, and MU data transmissions. Two solutions for the beam assignment are provided with different complexity-performance tradeoff. Analytical results and simulations show that for both SU and MU systems, the proposed joint training and transmission designs achieve the same outage performance as the traditional full-training scheme but with significant saving in the training overhead., 16 Pages (double column), 11 figures. This work has been accepted by the IEEE Journal of Selected Topics in Signal Processing (JSTSP), Special Issue on Hybrid Analog - Digital Signal Processing for Hardware-Efficient Large Scale Antenna Arrays. This version is different from the former one due to the revisions made for the comments of 1st and 2nd round review

This paper considers the uplink of multiuser massive multi-input multi-output systems with a mixed analog-to-digital converter (ADC) architecture, in which the base station (BS) is equipped with ADCs of different resolution levels. While higher resolution, ADCs reduce the quantization error to improve the performance; they also incur higher energy. This paper studies the receive energy efficiency (EE) and the ADC resolution profile design under the maximum-ratio combining receiver. First, closed-form approximations for the spectral efficiency (SE) and receive EE are derived for a general mixed ADC structure. Then, the ADC resolution profile optimization problem that maximizes the receive EE with respect to SE requirement is formulated. An algorithm based on decremental searching and dynamic programming is proposed whose complexity is linear in the number of BS antennas. Numerical results verify that with the proposed design, the mixed-ADC receiver can have nearly the same SE performance as the all full-resolution one but with considerably lighter burden of energy consumption.

This paper conducts sensitivity analysis and sensitivity-based design for linear filter alarm monitoring systems. Based on a derivative-based local sensitivity measure, models are proposed to assess the sensitivity of the system detection errors to changes in the trip point and to uncertainties in the collected data. Then, analytical expressions are derived to quantitatively evaluate the sensitivity of a general linear alarm filter with unknown data distributions. Subsequently, a new sensitivity-based linear filter design method is formulated to minimize a weighted sum of the detection errors subject to upper bounds on the system sensitivities. Extensive simulations with both Gaussian and industrial data are conducted to verify the analytical results and to show trade-offs between the detection errors and sensitivities of linear filter alarm system.

This paper provides a comprehensive scaling law-based performance analysis for multicell multiuser massive multiple-input-multiple-output (MIMO) downlink systems. Imperfect channel state information (CSI), pilot contamination, and channel spatial correlation are all considered. First, a sum-rate lower bound is derived by exploiting the asymptotically deterministic property of the received signal power, while keeping the random nature of other components in the signal-to-interference-plus-noise-ratio (SINR) intact. Via a general scaling model on important network parameters, including the number of users, the channel training energy and the data transmission power, with respect to the number of base station antennas, the asymptotic scaling law of the effective SINR is obtained, which reveals quantitatively the tradeoff of the network parameters. More importantly, pilot contamination and pilot contamination elimination (PCE) are considered in the analytical framework. In addition, the applicability of the derived asymptotic scaling law in practical systems with large but finite antenna numbers are discussed. Finally, sufficient conditions on the parameter scalings for the SINR to be asymptotically deterministic in the sense of mean square convergence are provided, which covers existing results on such analysis as special cases and shows the effect of PCE explicitly.

This paper provides a comprehensive scaling law and performance analysis for multi-user massive multiple-input-multiple-output (MIMO) relay networks, where the relay is equipped with a massive antenna array and uses maximal-ratio combining/maximal-ratio transmission (MRC/MRT) for low-complexity processing. Imperfect channel state information (CSI) is considered for both source-relay and relay-destination channels. First, a sum-rate lower bound is derived, which manifests the effect of system parameters, including the numbers of relay antennas and users, the CSI quality, and the transmit powers of the sources and the relay. Via a general scaling model on the parameters with respect to the relay antenna number, the asymptotic scaling law of the signal-to-interference-plus-noise-ratio (SINR) is obtained, which shows quantitatively the tradeoff of the network parameters. In addition, a sufficient condition on the parameter scalings for the SINR to be asymptotically deterministic is given, which covers existing results on such analysis as special cases. Then, the scenario where the SINR increases linearly with the relay antenna number is studied. The sufficient and necessary condition on the parameter scaling for this scenario is proved. It is shown that in this case, the interference power is not asymptotically deterministic, and then, the average bit error rate is analyzed.

Mean-squared-error (MSE) is one of the most widely used performance metrics for the designs and analysis of multi-input-multiple-output (MIMO) communications. Weighted MSE minimization, a more general formulation of MSE minimization, plays an important role in MIMO transceiver optimization. While this topic has a long history and has been extensively studied, existing treatments on the methods in solving the weighted MSE optimization are more or less sporadic and non-systematic. In this paper, we firstly review the two major methodologies, Lagrange multiplier method and majorization theory based method, and their common procedures in solving the weighted MSE minimization. Then some problems and limitations of the methods that were usually neglected or glossed over in existing literature are provided. These problems are fundamental and of critical importance for the corresponding MIMO transceiver optimizations. In addition, a new extended matrix-field weighted MSE model is proposed. Its solutions and applications are discussed in details. Compared with existing models, this new model has wider applications, e.g., nonlinear MIMO transceiver designs and capacity-maximization transceiver designs for general MIMO networks., 34 Pages, 4 figures

Early and accurate detection of incipient cable faults is of a great interest to the utility industry. Such faults can be classified into subcycle and multicycle types. Although a lot of research has been conducted on subcycle types of faults, little work has been done for multicycle types of faults. This paper proposes a novel method for detecting and locating a multicycle incipient fault in a cable. The incipient fault is modeled as a self-clearing arcing fault. The distortion degree of calculated voltage is used to detect the occurrence of an incipient fault. The degree of match between the measured and calculated waveforms is used to guide the search for the fault distance. The accuracy is further improved by taking into account the incipient fault angle as seen in the voltage waveform and the power loss characteristics. The proposed method has been verified by PSCAD/EMTDC simulations. Lab experiments are also conducted to further validate the proposed detection method.

Statistical beamforming is an important technique for multi-user massive MIMO downlink, since it depends on the downlink channel covariance only. In this paper, we first derive an explicit analytical sum-rate expression for generic channel covariance-based beamforming scheme. Then, a low-complexity joint statistical beamforming and user scheduling algorithm via greedy search is proposed, where the beamforming is based on the signal-to-leakage-and-noise-ratio (SLNR) for closed-form design and tractable analysis, while the user scheduling is based on the derived sum-rate expression. Further, with the help of large-scale asymptotic simplifications and the introduction of the interference user number parameter, a simple analytical sum-rate expression of the joint algorithm is derived for channels with flat power beam spectrum. The expression explicitly exhibits the sum-rate behavior with respect to different network parameters and captures the effect of sum-rate-based user scheduling. Finally, simulation results are provided to verify our analytical results and to show the advantage of the proposed joint design compared with existing schemes.

In recent years, power quality (PQ) disturbance data are increasingly applied to extract useful information about the condition of power systems, such as monitoring incipient equipment failures. A prerequisite for such applications is the ability for a PQ monitor to detect abnormal waveforms. In response to this need, a generic method for waveform abnormality detection is proposed in this paper. The proposed method has two unique features. First, abnormalities are detected by comparing the statistical distributions of waveform variations with and without disturbances. Kullback-Leibler divergence (KLD) is used to assess the difference of the distributions. An abnormality exists if the KLD is larger than a threshold. Second, current waveforms are used for detection since they are more sensitive to equipment conditions. The difficulty to set a proper threshold due to large variations of current values is overcome through the adoption of KLD as the distance measure and a systematic threshold selection scheme. The scheme maximizes the detection probability for a given false alarm probability. Field-measured data and simulated data are applied to verify the effectiveness of the method.

As a key infrastructure of Internet of Things (loT), wireless sensor networks (WSN) can be utilized in a wide range of applications. The prediction based data fusion methods provide effective tools to reduce the amount of data transmissions while maintaining prediction accuracy. Recently a grey prediction model (GM) combining optimally-pruned extreme learning machine (OPELM) data fusion method has been proposed and shown to have good performance. However, the existing GM- OPELM method performs model training and broadcasting before each prediction, resulting in high complexity and energy consumption. In this paper the conditional training based GM (CT-GM) and GM-OPELM (CT-GM-OPELM) are proposed. By introducing an error threshold, the algorithms only perform model training when the prediction error is beyond the threshold. Compared with existing GM and GM-OPELM methods, the CT- GM and CT-GM-OPELM methods not only can achieve the higher rate of acceptable prediction and better time efficiency but also has significant reduction in the energy consumption on model training and transmissions.

This paper is on the uplink communications of single-cell multi-user massive multi-input-multi-output (MIMO) systems with a mixture of 1-bit analog-to-digital converters (ADCs) and full-resolution ADCs. A new low-complexity linear combining scheme is proposed for the receiver at the base station (BS) to take into account the difference of the two ADC types. A symbol-wise decoding is derived to separately decode the information of each user and an analytical approximation is obtained for the symbol error rate (SER) of the proposed combining and decoding. Simulation results show that the proposed scheme achieves significant performance improvement compared to the traditional maximum-ratio-combining (MRC) receiver.

This paper considers a multiple-input multiple-output (MIMO) multi-way relay network (MWRN) where users exchange their information via a multi-way relay equipped with a large-scale antenna array, i.e., massive MIMO multi-way relay. Further, each antenna at the relay station is assumed to have a pair of low-resolution analog-to-digital converters (ADCs) to reduce the energy consumption and hardware cost at the relay. Lloyd-max algorithm is used to find the mean-squared error (MSE) optimum quantization labels and thresholds for the ADCs. With perfect channel state information (CSI) and zero-forcing (ZF) beam-forming for both reception and transmission at the relay, a closed-form approximation for the average achievable rate of each pair of users is derived with the help of Bussgang's decomposition. The results enable us to understand the achievable rate behavior with respect to system parameters, and especially to quantify the performance degradation caused by low-resolution ADCs. Numerical results verify the validity of Bussgang's theorem in our case, and that the derived result is an accurate performance predictor of the network. Further, both analytical and theoretical results reveal that the effect of ADC resolutions on the rate performance is as significant as the relay and users' transmit powers.

We consider the use of deep neural network (DNN) to develop a decision-directed (DD)-channel estimation (CE) algorithm for multiple-input multiple-output (MIMO)-space-time block coded systems in highly dynamic vehicular environments. We propose the use of DNN for $k$ -step channel prediction for space-time block code (STBC), and show that deep learning (DL)-based DD-CE can remove the need for Doppler rate estimation in fast time-varying quasi stationary channels, where the Doppler rate varies from one packet to another. Doppler rate estimation in this kind of vehicular channels is remarkably challenging and requires a large number of pilots and preambles, leading to lower power and spectral efficiency. We train two DNNs which learn the real and imaginary parts of the MIMO fading channels over a wide range of Doppler rates. We demonstrate that by these DNNs, DD-CE can be realized with only priori knowledge about Doppler rate range and not the exact value. For the proposed DD-CE algorithm, we also analytically derive the maximum likelihood (ML) decoding algorithm for STBC transmission. The proposed DL-based DD-CE is a promising solution for reliable communication over vehicular MIMO fading channels without accurate mathematical models. This is because DNNs can intelligently learn the statistics of the fading channels. Our simulation results show that the proposed DL-based DD-CE algorithm exhibits lower error propagation compared to existing DD-CE algorithms which require perfect knowledge of the Doppler rate.

This work analyses the average signal-to-noise ratio (SNR) and ergodic capacity of large-scale relay networks with best relay selection (BRS). First, extreme value theory (EVT) is used to obtain an implicit expression for the asymptotic cumulative distribution function (cdf) of the received SNR when the number of relays is high. Then, via high power approximations, closed-form expressions for the cdf and probability density function (pdf) of the received SNR are achieved, from which closed-form expressions of the average received SNR and ergodic capacity are derived. Insights on the array gain and ergodic capacity behavior of BRS can be observed from the derived results. Simulations show that the derived approximations are tight, even for not-so-large relay networks.

This letter analyzes the user-interference and outage probability for single-cell multi-user massive multi-input-multi-output (MIMO) systems with matched-filter (MF) precoding. Existing performance studies on massive MIMO systems have focused on the sum-rate by deriving the asymptotic deterministic equivalence. In this work, we treat the user-interference as random, and derive a tight closed-form approximation for the distribution of the interference power. This enables the analysis of the outage probability. The derived results are shown to have accurate match with the simulation.

This paper investigated the uplink of multi-user massive multi-input multi-output (MIMO) systems with a mixed analog-to-digital converter (ADC) receiver architecture, in which some antennas are equipped with costly full-resolution ADCs and others with less expensive low-resolution ADCs. A closed-form approximation of the achievable spectral efficiency (SE) with the maximum-ratio combining (MRC) detector is derived. Based on this approximated result, the effects of the number of base station antennas, the transmit power, the proportion of full-resolution ADCs in the mixed-ADC structure, and the number of quantization bits of the low-resolution ADCs are revealed. Results showcase that the achievable SE increases with the number of BS antennas and quantization bits, and it converges to a saturated value in the high user power regime or the full ADC resolution case. Most important, this work efficiency verifies that for massive MIMO, the mixed-ADC receiver with a small fraction of full-resolution ADCs can have comparable SE performance with the receiver with all full-resolution ADCs but at a considerably lower hardware cost., Comment: 11 pages, 3 figures

Water-filling solutions play an important role in the designs for wireless communications, e.g., transmit covariance matrix design. A traditional physical understanding is to use the analogy of pouring water over a pool with fluctuating bottom. Numerous variants of water-filling solutions have been discovered during the evolution of wireless networks. To obtain the solution values, iterative computations are required, even for simple cases with compact mathematical formulations. Thus, algorithm design is a key issue for the practical use of water-filling solutions, which however has been given marginal attention in the literature. Many existing algorithms are designed on a case-by-case basis for the variations of water-filling solutions and/or with complex logics. In this paper, a new viewpoint for water-filling solutions is proposed to understand the problem dynamically by considering changes in the increasing rates on different subchannels. This fresh viewpoint provides useful mechanism and fundamental information in finding the optimization solution values. Based on the new understanding, a novel and comprehensive method for practical water-filling algorithm design is proposed, which can be used for systems with various performance metrics and power constraints, even for systems with imperfect channel state information (CSI)., 16 pages, 3 figures. This manuscript is submitted to IEEE Transactions on Signal Processing

This paper studies the relay selection (RS) problem for full-duplex (FD) relay networks with multiple source-destination (SD) pairs under the attack of colluding eavesdroppers. Based on available channel state information (CSI), both optimal relay selection (ORS) and suboptimal relay selection (SRS) schemes are considered to maximize the minimum secrecy rate among all pairs in order to enhance the physical-layer security. The secrecy performance of the more practical SRS scheme is then evaluated in terms of intercept probability and diversity order. The SRS achieves full diversity when the gains of the main-to- eavesdropper and the main-to-interference channels increase asymptotically.

Zero-forcing (ZF) precoding plays an important role for massive MIMO downlink due to its near optimal performance in high signal-to- noise (SNR) region. However, the high computation cost of the involved matrix inversion hinders its application in practical large- scale systems. In this paper, we adopt the first order Neumann series (NS) expansion for a low-complexity approximation of matrix inversion. Compared to existing NS based schemes, we introduce a relaxation parameter jointly with one user's channel interference to others into the precondition matrix and propose the identity-plus- column NS (ICNS) method. By further exploiting the multi-user diversity gain via choosing the user with largest interference to others, the ordered ICNS method is also proposed. Moreover, the closed-form sum-rate approximation of the ICNS method is derived. Simulations verify our analytical results and the advantage of the proposed schemes over other existing low-complexity ZF precodings for massive MIMO systems with correlated channels and not-so-small loading factor.

In this paper, we study the beam-based training design for the single-user (SU) hybrid massive antenna system based on outage probability performance. First, an interleaved training design is proposed where the feedback is concatenated with the training procedure to monitor the training status and to have the training length adaptive to the channel realization. Then, the average training length and outage probability are derived for the proposed interleaved training and SU transmission. Analytical results and simulations show that the proposed interleaved scheme achieves the same outage performance as the traditional full-training scheme but with significant saving in the training overhead.

Non-orthogonal multiple access (NOMA), as the newest member of the multiple access family, is envisioned to be an essential component of 5G mobile networks. The combination of NOMA and multi-antenna multi-input multi-output (MIMO) technologies exhibits a significant potential in improving spectral efficiency and providing better wireless services to more users. In this article, we introduce the basic concepts of MIMO-NOMA and summarize the key technical problems in MIMO-NOMA systems. Then, we explore the problem formulation, beamforming, user clustering, and power allocation of single/multi-cluster MIMO-NOMA in the literature along with their limitations. Furthermore, we point out an important issue of the stability of successive interference cancellation (SIC) that arises using achievable rates as performance metrics in practical NOMA/MIMO-NOMA systems. Finally, we discuss incorporating NOMA with massive/millimeter wave MIMO, and identify the main challenges and possible future research directions in this area., 14 pages (single column), 4 figures. This work has been accepted by the IEEE Wireless Communications, the special issue of non-orthogonal multiple access for 5G