Search

Biochar application to the soil is a novel approach to carbon sequestration. Biochar application affects the emission of greenhouse gases (GHGs), such as CO2, CH4, and N2O, from different environments (e.g. upland soils, rice paddies and wetlands, and composting environments). In this review, the effect of biochar on GHGs emissions from the above three typical environments are critically evaluated based on a literature analysis. First, the properties of biochar and engineered biochar related to GHGs emissions was reviewed, targeting its relationship with climate change mitigation. Then, a meta-analysis was conducted to assess the effect of biochar on the emissions of CO2, CH4, and N2O in different environments, and the relevant mechanisms. Several parameters were identified as the main influencing factors in the meta-analysis, including the pH of the biochar, feedstock type, pyrolysis temperature, biochar application rate, C/N ratio of the biochar, and experimental scale. An overall suppression effect among different environments was found, in the following order for different greenhouse gases: N2O > CH4 > CO2. We conclude that biochar can change the physicochemical properties of soil and compost in different environments, which further shapes the microbial community in a specific environment. Biochar addition affects CO2 emissions by influencing oligotrophic and copiotrophic bacteria; CH4 emissions by regulating the abundance of functional genes, such as mcrA (a methanogen) and pmoA (a methanotroph); and N2O emissions by controlling N-cycling functional genes, including amoA, nirS, nirK, nosZ. Finally, future research directions for mitigating greenhouse gas emissions through biochar application are suggested.

Converting plastic waste into valuable products (syngas) is a promising approach to achieve sustainable cities and communities. Here, we propose for the first time to convert plastic waste into syngas via the Fe

Industrial-scale upcycling of waste polyethylene terephthalate (PET) plastic into porous carbon globally for CO2 capture was verified as a multifunctional alternative to conventional CO2 absorption and plastic waste management technologies.

We are racing to manage a phenomenally increasing volume of organic wastes from urban, industrial and agricultural entities. Composting is one of the preferred ways to convert biodegradable wastes into nutrient-rich soil conditioners. The age-old technique of composting process is being improved with innovative scientific means. Biochar, a widely studied soil amendment, is a carbonaceous material that can hold nutrients from endogenic/exogenic sources. Biochar-compost, a biochar-complemented compost, may provide a wide range of benefits expected from both materials. Compost and biochar can improve physicochemical and microbiological attributes of soils by supplying labile and stable carbons, and nutrients. Compost may also supply beneficial microbes. This means biochar-compost is a synergic soil amendment that can improve soil quality, increase crop production, and remediate contaminated soils. Having stable carbon, large reactive surface with nutrient loads, biochar can interact widely with organic biomass and modify physicochemical and-microbial states during a composting process while making biochar-compost. Production and application methods of biochar, compost and biochar-compost are covered for agricultural and contaminated soils. Metal and organic contaminations are also discussed. A case study on making and field-testing a mineral-enhanced biochar and a biochar-compost to improve rice yield, is presented at the end.

The engineered biochar has been extensively developed for environmental applications in the last decade, owing to its carbon-neutral and long-term persistent characteristics. Here, we addressed the...

Refereed/Peer-reviewed Metal halide perovskite solar cells (PSCs) have gained extensive attention in the field of solar photovoltaic technology over the past few years. Despite being a remarkable alternative to fossil fuels, solar cells may have detrimental effects on the environment and human health owing to the use of toxic materials during manufacturing. Although modern metal-halide-based PSCs are stable and have encapsulation to prevent the release of potentially toxic materials into the environment, their destruction due to strong winds, hail, snow, landslides, fires, or waste disposal can result in the exposure of these materials to the environment. This may lead to the contamination of soil and groundwater, and uptake of potentially toxic elements by plants, subsequently affecting humans and other living organisms via food chain contamination. Despite worldwide concern, the environmental and ecotoxicological impacts of metal-halide-based PSCs have not been comprehensively surveyed. This review summarizes and critically evaluates the current status of metal-halide-based PSC production and its impact on environmental sustainability, food security, and human health. Furthermore, safe handling and disposal methods for the waste generated from metal-halide-based PSCs are proposed, with a focus on recycling and reuse. Although some studies have suggested that the amount of lead released from metal halide PSCs is far below the maximum permissible levels in most soils, a clear conclusion cannot be reached until real contamination scenarios are assessed under field conditions. Precautions must be taken to minimize environmental contamination throughout the lifecycle of PSCs until nontoxic and similarly performing alternative solar photovoltaic products are developed.

Gluing dynamic, wet biological tissue is important in injury treatment yet difficult to achieve. Polymeric adhesives are inconvenient to handle due to rapid cross-linking and can raise biocompatibility concerns. Inorganic nanoparticles adhere weakly to wet surfaces. Herein, an aqueous suspension of guanidinium-functionalized chitin nanoparticles as a biomedical adhesive with biocompatible, hemostatic, and antibacterial properties is developed. It glues porcine skin up to 3000-fold more strongly (30 kPa) than inorganic nanoparticles at the same concentration and adheres at neutral pH, which is unachievable with mussel-inspired adhesives alone. The glue exhibits an instant adhesion (2 min) to fully wet surfaces, and the glued assembly endures one-week underwater immersion. The suspension is lowly viscous and stable, hence sprayable and convenient to store. A nanomechanic study reveals that guanidinium moieties are chaotropic, creating strong, multifaceted noncovalent bonds with proteins: salt bridges comprising ionic attraction and bidentate hydrogen bonding with acidic moieties, cation−π interactions with aromatic moieties, and hydrophobic interactions. The adhesion mechanism provides a blueprint for advanced tissue adhesives.

We synthesized 20 years of research to explain the interrelated processes that determine soil and plant responses to biochar. The properties of biochar and its effects within agricultural ecosystems largely depend on feedstock and pyrolysis conditions. We describe three stages of reactions of biochar in soil: dissolution (1–3 weeks); reactive surface development (1–6 months); and aging (beyond 6 months). As biochar ages, it is incorporated into soil aggregates, protecting the biochar carbon and promoting the stabilization of rhizodeposits and microbial products. Biochar carbon persists in soil for hundreds to thousands of years. By increasing pH, porosity, and water availability, biochars can create favorable conditions for root development and microbial functions. Biochars can catalyze biotic and abiotic reactions, particularly in the rhizosphere, that increase nutrient supply and uptake by plants, reduce phytotoxins, stimulate plant development, and increase resilience to disease and environmental stressors. Meta-analyses found that, on average, biochars increase P availability by a factor of 4.6; decrease plant tissue concentration of heavy metals by 17%–39%; build soil organic carbon through negative priming by 3.8% (range −21% to +20%); and reduce non-CO greenhouse gas emissions from soil by 12%–50%. Meta-analyses show average crop yield increases of 10%–42% with biochar addition, with greatest increases in low-nutrient P-sorbing acidic soils (common in the tropics), and in sandy soils in drylands due to increase in nutrient retention and water holding capacity. Studies report a wide range of plant responses to biochars due to the diversity of biochars and contexts in which biochars have been applied. Crop yields increase strongly if site-specific soil constraints and nutrient and water limitations are mitigated by appropriate biochar formulations. Biochars can be tailored to address site constraints through feedstock selection, by modifying pyrolysis conditions, through pre- or post-production treatments, or co-application with organic or mineral fertilizers. We demonstrate how, when used wisely, biochar mitigates climate change and supports food security and the circular economy., Program of Competitive Growth of Kazan Federal University and the “RUDN University program 5-100” La Trobe University. Grant Number: LTU SFWE RFA 2000004349

Biomass waste-derived porous carbons (BWDPCs) are a class of complex materials that are widely used in sustainable waste management and carbon capture. However, their diverse textural properties, the presence of various functional groups, and the varied temperatures and pressures to which they are subjected during CO2 adsorption make it challenging to understand the underlying mechanism of CO2 adsorption. Here, we compiled a data set including 527 data points collected from peer-reviewed publications and applied machine learning to systematically map CO2 adsorption as a function of the textural and compositional properties of BWDPCs and adsorption parameters. Various tree-based models were devised, where the gradient boosting decision trees (GBDTs) had the best predictive performance with R2 of 0.98 and 0.84 on the training and test data, respectively. Further, the BWDPCs in the compiled data set were classified into regular porous carbons (RPCs) and heteroatom-doped porous carbons (HDPCs), where again the GBDT model had R2 of 0.99 and 0.98 on the training and 0.86 and 0.79 on the test data for the RPCs and HDPCs, respectively. Feature importance revealed the significance of adsorption parameters, textural properties, and compositional properties in the order of precedence for BWDPC-based CO2 adsorption, effectively guiding the synthesis of porous carbons for CO2 adsorption applications.

Eight to ten percent of total global greenhouse gas emissions are associated with food loss and waste. Tackling the challenges of food loss and sustainable food waste management is key to fulfilling the Paris Agreement. However, among the Nationally Determined Contributions to the Paris Agreement, very few countries make references to food loss and waste. In this work, we reviewed the problem of food loss and waste from a global viewpoint and highlighted the opportunities of managing food loss and waste towards carbon mitigation and beyond. The importance of developing a coherent collaboration among all associated stakeholders was implied. Some recent policy developments and the impacts of COVID-19 pandemic are discussed followed by the summarization of potential solutions to tackling the fool loss and waste challenge.

As the prices of photovoltaics and wind turbines continue to decrease, more renewable electricity-generating capacity is installed globally. While this is considered an integral part of a sustainable energy future by many nations, it also poses a significant strain on current electricity grids due to the inherent output variability of renewable electricity. This work addresses the challenge of renewable electricity surplus (RES) utilization with target-scaling of centralized power-to-gas (PtG) hydrogen production. Using the Republic of Korea as a case study, due to its ambitious plan of 2030 green hydrogen production capacity of 0.97 million tons year

This study innovated the concept in designing an efficient and reusable microwave (MW) absorbent through concurrent exploitation of carbon graphitization, oxygen functionalization, and carbothermal iron reduction underpinned by an endothermic co-pyrolysis of wood waste and low-dosage iron. A powerful MW assimilation was accomplished from nanoscale amorphous magnetic particles as well as graphitized microporous carbon-iron skeleton in the biochar composites. Relative to a weak magnetic loss derived from the iron phase, the graphitic carbon architecture with abundant surface functionalities (i.e., CO and CO) exhibited a strong dielectric loss, which was thus prioritized as major active sites during MW reuse. The MW-absorbing biochar demonstrated a fast, robust, and durable removal of a refractory herbicide (2,4-dichlorophenoxy acetic acid) under mild MW irradiation with zero chemical input, low electricity consumption, and negligible Fe dissolution. Overall, this study will foster carbon-neutral industrial wastewater treatment and wood waste valorization.

A modified chitosan-polyvinyl alcohol (PVA) hydrogel was developed by incorporating Fe

The potential of biochar with different surface functionalities to immobilize soil vanadium (V) and reduce its phytoavailability has not been studied. We investigated the effects of different doses (0, 2.5, and 5%) of three biochars derived from rice hull and wood residues on fractionation, mobilization, and plant uptake of V in an acidic soil contaminated with V (3750 mg kg–¹). Application of wood biochar, with high O-containing functional groups, at 2.5% decreased the water-soluble V by 46% and the soluble + exchangeable V by 32% in soil, as well as reduced the V uptake by corn and sorghum up to 86% in shoots and 65% in roots. Application of wood and rice hull biochars, with low O-containing functional groups, increased V solubility, and thus corn and sorghum were incapable of growing in treated soils. The higher reactive surface, acidity, abundance of various O-containing functional groups, and hydrophilicity of the former wood biochar contributed to its superior performance. Solubility of V increased with the biochar-induced increase of soil pH and dissolved organic carbon (DOC). Soil acidity and aromaticity of DOC are the main factors responsible for V immobilization. These results may help to elucidate the role of biochar in the sustainable management of V-contaminated soils.

This review offers a focused discussion on the recent progress of biomass-derived nitrogen-doped porous carbon (NPC) and its applications. Various synthesis methods for biomass-derived NPCs are introduced and critically reviewed. N-doping is a promising approach for further improving the physicochemical/electrochemical properties of carbon materials. Besides, NPC synthesis from inexpensive biomass for energy storage applications is a green and sustainable strategy. NPCs can be synthesized directly from algae, chitosan, and glucosamine without using any additional N precursor. The effect of synthesis methods on the physicochemical properties of NPCs offers a direction for optimizing the properties of NPCs for diverse applications. The utilization of NPCs in various applications, including catalysis and electrochemical energy storage (e.g., fuel cells, batteries, and supercapacitors), is reviewed. Besides, a discussion on the use of NPCs in oxidation and hydrogenation reactions, CO2 capture and reduction is provided. The factors controlling the electrocatalytic performance of NPC are evaluated, such as the effect of N-content and the type of N species in NPCs. Finally, to improve the rational design of biomass-derived NPCs for catalysis and energy storage applications, an outlook and conclusion are provided.

This study presents the effect of bioaugmentation of thermophilic anaerobic digestion of food waste with Methanosarcina thermophila grown on a wood-derived biochar. Two different supplementation regimes were tested, namely a single bioaugmentation (SBABC) in which 10% v/v of the microbes grown on biochar (1 g/L) is added at setup of the reactors, versus a routine bioaugmentation (RBABC) wherein the same amount of supplements were added over 10 feeding cycles. The optimally performing 'R' and 'S' reactors had increased methane yields by 37% and 32% over their respective controls while reactors SBABC 2 and 3 produced 21.89% and 56.09% higher average methane yield than RBABC 2 and 3, respectively. It appears that a single dose bioaugmentation is advantageous for improving AD as analysed in terms of average methane yield and VFA production. This study provides the basis for understanding how biochar and bioaugmentation can be used for engineering sustainable pilot-scale AD processes.

Carbon nanotubes present potential applications in soil remediation, particularly in phytoremediation. Yet, how multi-walled carbon nanotubes (MWCNTs) induced hyperaccumulator growth at molecular level remains unclear. Here, physio-biochemical, transcriptomic, and metabolomic analyses were performed to determine the effect of MWCNTs on Solanum nigrum L. (S. nigrum) growth under cadmium and arsenic stresses. 500 mg/kg MWCNTs application significantly promoted S. nigrum growth, especially for root tissues. Specially, MWCNTs application yields 1.38-fold, 1.56-fold, and 1.37-fold enhancement in the shoot length, root length, and fresh biomass, respectively. Furthermore, MWCNTs significantly strengthened P and Fe absorption in roots, as well as the activities of antioxidative enzymes. Importantly, the transcriptomic analysis indicated that S. nigrum gene expression was sensitive to MWCNTs, and MWCNTs upregulated advantageous biological processes under heavy metal(loid)s stress. Besides, MWCNTs reprogramed metabolism that related to defense system, leading to accumulation of 4-hydroxyphenylpyruvic acid (amino acid), 4-hydroxycinnamic acid (xenobiotic), and (S)-abscisic acid (lipid). In addition, key common pathways of differentially expressed metabolites and genes, including "tyrosine metabolism" and "isoquinoline alkaloid biosynthesis" were selected via integrating transcriptome and metabolome analyses. Combined omics technologies, our findings provide molecular mechanisms of MWCNTs in promoting S. nigrum growth, and highlight potential application of MWCNTs in soil remediation.

As an important subtopic within phytoremediation, hyperaccumulators have garnered significant attention due to their ability of super-enriching heavy metals. Identifying the factors that affecting phytoextraction efficiency has important application value in guiding the efficient remediation of heavy metal contaminated soil. However, it is challenging to identify the critical factors that affect the phytoextraction of heavy metals in soil-hyperaccumulator ecosystems because the current projections on phytoremediation extrapolations are rudimentary at best using simple linear models. Here, machine learning (ML) approaches were used to predict the important factors that affecting phytoextraction efficiency of hyperaccumulators. ML analysis was based on 173 data points with consideration of soil properties, experimental conditions, plant families, low-molecular-weight organic acids from plants, plant genes, and heavy metal properties. Heavy metal properties, especially the metal ion radius, were the most important factors that affect heavy metal accumulation in shoots, and the plant family was the most important factor that affect the bioconcentration factor, metal extraction ratio, and remediation time. Furthermore, the Crassulaceae family had the highest potential as hyperaccumulators for phytoremediation, which was related to the expression of genes encoding heavy metal transporting ATPase (HMA), Metallothioneins (MTL), and natural resistance associated macrophage protein (NRAMP), and also the secretion of malate and threonine. New insights into the effects of plant characteristics, experimental conditions, soil characteristics, and heavy metal properties on phytoextraction efficiency from ML model interpretation could guide the efficient phytoremediation by identifying the best hyperaccumulators and resolving its efficient remediation mechanisms.

Biochar application for the recovery of nutrients from wastewater is a sustainable method based on a circular economy. Wastewater, food wastewater, and stormwater are valuable sources of nutrients (i.e., PO

Hydrometallurgical approaches have been successfully employed for metal separation and recovery from various types of waste materials. Therefore, hydrometallurgy is a promising technology for metal recovery and the removal of potentially toxic heavy metals found in industrial sludge. However, a comprehensive review that focuses on the heavy metal recovery from industrial sludge using hydrometallurgical approaches has not been conducted in the recent past. The present review discusses the capacity of hydrometallurgical techniques in recovering heavy metals sourced from different types of industrial sludges, highlighting recent scientific findings. Hydrometallurgical approaches primarily consist of three process stages: metal dissolution, concentration and purification, and metal recovery. The chemical characteristics of industrial sludge, including the type, concentration and speciation of heavy metals, directly impact selection of the best recovery method. Solvent extraction, ion-exchange, and adsorption are the major techniques employed in concentration and purification, whereas electrodeposition and precipitation are the main methods used in metals recovery. Future research should focus on the development of more efficient and environmentally-friendly methods for metal dissolution from industrial sludges contaminated with multiple metals, while increasing selectivity and energy use efficiency in the concentration and purification, and recovery steps.