Search

Implanting rotary blood pumps (RBPs) has become the principal treatment for patients suffering from severe heart failure. There are still many challenges to address for RBP control systems. These problems include meeting the patient’s physiological perfusion, eliminating postoperative complications, as well as debugging the patient’s physiological control system (automatically and indiscriminately). This paper proposes a non-invasive adaptive control system based on the Frank–Starling-like mechanism (NAC-FSL) to solve these problems. This control system uses the motor speed of the rotary blood pump as the only input variable, and the pump flow was estimated by the motor speed for achieving non-invasive detection. Simultaneously, a cardiovascular reference model was developed to provide an appropriate real-time preload for heart failure patients. The Frank–Starling-like control baseline was tracked to obtain the desired reference average pump flow by using the preload. Avoiding suction was done by adopting the control baseline (CLn), which included a flat slope under a high preload. Moreover, the NAC-FSL system could potentially unload the left ventricle and provide a higher pump flow with a smaller error during the exercise state, as compared to the CSC system. Finally, the K value indicating the preload sensitivity in the NAC-FSL controller was optimized to meet the perfusion needs according to the hemodynamic parameters.

Objectives: This study aims to investigate the effects of prenatal music therapy on fetal and neonatal status. Design and setting: A systematic review and meta-analysis of randomized controlled trials. Interventions: Ovid MEDLINE, Embase, Web of Science, Cochrane Library, and Chinese Biomedical Literature Database were searched for studies investigating the effects of prenatal music therapy. Two independent investigators carried out the literature selection, data analysis, and evidence quality assessment. Eligible studies were qualitatively described and synthesized using meta-analyses. Main outcome measures: The outcomes included fetal or neonatal status. Results: After screening the 821 records yielded by the systematic search, we identified nine eligible studies involving 1419 pregnant women. Eight studies were included in the meta-analysis, and three outcomes were synthesized. Compared with no music therapy, prenatal music therapy did not change fetal heart rate (mean difference [95 % CI]: -0.28 [-3.75–3.20] beat/min, P = 0.88, moderate quality), number of fetal movements (mean difference [95 % CI]: 0.50 [-0.79–1.78] time/min, P = 0.45, low quality), or number of accelerations (mean difference [95 % CI]: 0.16 [-0.87–1.19] time/min, P = 0.76, low quality). This result did not change when two studies with a high risk of bias were excluded. Subgroup analysis showed that prenatal music therapy did not change fetal heart rate, number of fetal movements, or number of accelerations in different intervention phases. Conclusions: Prenatal music therapy might not change fetal and neonatal status. However, more systematic strategies of prenatal music therapy deserve further exploration.

In unmanned aerial vehicle (UAV)-enabled data collection systems, situations where sensor nodes (SNs) cannot upload their data successfully to the UAV may exist, due to factors such as SNs’ insufficient energy and the UAV’s minimum flight altitude. In this paper, an unmanned ground vehicle (UGV)-UAV-enabled data collection system is studied, where data collection missions are conducted by a UAV and a UGV cooperatively. Two cooperative strategies are proposed, i.e., collaboration without information interaction, and collaboration with information interaction. In the first strategy, the UGV collects data from remote SNs (i.e., the SNs that cannot upload data to the UAV) as well as some normal SNs (i.e., the SNs that can upload data to the UAV), while the UAV only collects data from some normal SNs. Then, they carry the data back to the data center (DC) without interacting with each other. In the second strategy, the UGV only collects data from remote SNs, while transmitting the collected data to the UAV at a data interaction point, then the data are carried back to the DC by the UAV. There are mobile data collection nodes on the ground and in the air, and the task is to find trajectories to minimize the data collection time in the data center. A collaborative strategy selection algorithm, combining a multi-stage-based SN association and UAV-UGV path optimization algorithm, is proposed to solve the problem effectively, where techniques including convex optimization and genetic algorithm are adopted. The simulation result shows that the proposed scheme reduces the mission completion time by 36% compared with the benchmark scheme.

Background: Increased serum hepcidin-25 level is associated with excess mortality in hemodialysis patients. However, there is a dearth of published information about its predictive effect for survival in patients on peritoneal dialysis (PD). The purpose of this study is to evaluate the association of serum hepcidin-25 with the risk of mortality in PD patients.Methods: Serum hepcidin-25 level was measured using an enzyme-linked immunosorbent assay in a prospective cohort study of PD patients with stored serum samples at baseline. Multivariate linear regression model was used to determine clinical characteristics associated with serum hepcidin-25 concentration. We evaluated the relationship between serum hepcidin-25 and all-cause mortality using a Cox proportional hazards model and the relationship between hepcidin-25 and cardiovascular (CV) and infection-related deaths using competing-risks regression models.Results: In total, 513 PD patients were included in this study. The median serum hepcidin-25 level was 40.9 (17.9–85.9) ng/mL. Body mass index and serum ferritin were positively correlated with serum hepcidin-25 levels. During a median follow-up period of 64.1 months, 122 (24%) patients died, including 61 (50%) CV deaths and 32 (26%) infection-related deaths. In multivariable analysis, patients with the highest tertile of serum hepcidin-25 had a greater risk of all-cause [adjusted hazard ratio (aHR) 1.85, 95% confidence interval (95%CI), 1.14 to 3.00, P = 0.013] and infection-related mortality (adjusted subdistribution hazard ratio [aSHR], 2.61; 95%CI, 1.01 to 6.76, P = 0.049) when compared with those in the second tertile. However, no significant relationship was observed between serum hepcidin-25 and CV mortality.Conclusions: Higher baseline serum hepcidin-25 level was associated with increased risk for all-cause and infection-related mortality in PD patients.

Abstract Background Urgent-start peritoneal dialysis (PD) can help patients with end-stage renal diseases (ESRD) that are referred late to dialysis. However, catheter patency and related complications of urgent-start PD have not been thoroughly clarified. We investigated the clinical outcomes of urgent-start PD in a Chinese cohort. Methods We enrolled ESRD patients who received urgent-start PD (starting PD within 14 days after catheter insertion) in our center from January 1, 2006 to December 31, 2014, and followed them up for 10 years. The primary outcome was catheter failure. Secondary outcomes included short-term and long-term complications related to urgent-start PD. Results Totally 2059 patients (58.9% male, mean age 47.6 ± 15.9 years) were enrolled. Few perioperative complications were observed, including significant hemorrhage (n = 3, 0.1%) and bowel perforation (n = 0). Early peritonitis occurred in 24 (1.2%) patients (0.28 episodes per patient-year). Within the first month after catheter insertion, functional catheter malfunction occurred in 85 (4.1%) patients, and abdominal wall complications (including hernia, hydrothorax, hydrocele, and leakage) in 36 (1.7%) patients. During a median 36.5 (17.7–61.4) months of follow-up, 75 (3.6%) patients experienced catheter failure, and 291 (14.1%) had death-censoring technique failure. At the end of 1-month, 1 -year, 3-year, and 5-year, catheter patency rate was 97.6, 96.4, 96.2, 96.2%; and technique survival rate was 99.5, 97.0, 90.3, 82.7%, respectively. After adjusting for confounders, every 5-year increase in age was associated with 19% decrease of risk for catheter failure (hazard ratio [HR]: 0.81, 95% confidence interval [CI]: 0.73–0.89). Male sex (HR: 1.43, 95% CI: 1.00–2.04), diabetic nephropathy (HR: 1.56, 95% CI: 1.08–2.25) and low hemoglobin levels (HR: 0.89, 95% CI: 0.81–0.98) were independent risk factors for abdominal wall complications. Conclusions Urgent-start PD is a safe and efficacious option for unplanned ESRD patients. A well-trained PD team, a standardized catheter insertion procedure by experienced nephrologists, and a carefully designed initial PD prescription as well as comprehensive follow-up care, might be essential for the successful urgent-start PD program.

Abstract Transposase-Accessible Chromatin followed by sequencing (ATAC-seq) is a simple protocol for detection of open chromatin. Computational footprinting, the search for regions with depletion of cleavage events due to transcription factor binding, is poorly understood for ATAC-seq. We propose the first footprinting method considering ATAC-seq protocol artifacts. HINT-ATAC uses a position dependency model to learn the cleavage preferences of the transposase. We observe strand-specific cleavage patterns around transcription factor binding sites, which are determined by local nucleosome architecture. By incorporating all these biases, HINT-ATAC is able to significantly outperform competing methods in the prediction of transcription factor binding sites with footprints.

This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1186/s12886-020-01565-z.

Abstract The innovative 3D printing has been successfully applied to layeredly build-up construction-scale structures through the extrusion of various cementitious materials. Favourable buildability of fresh cement mixture and the hardened properties of the printed structures are essential requirement for the application of 3D concrete printing. This paper firstly proposed a 3D printable cement mixture containing 40% mining tailings. The influence of paste age on the buildability of forty-layer structure was evaluated, as well as the bending resistance of prism specimen sawed from the printed structure. The bonding between layers is a critical factor that influences the structural capacity. In particular, the weak bonding interface formed in the layered extrusion process was identified through high-resolution X-ray CT scanning. It is necessary and desirable for the cement paste to perform both well buildability and mechanical performances. Thereafter, a proper amount of viscosity modify agent (VMA) was used to improve the structural integrity by increasing the contact behaviour between the adjacent extruded layers. Meanwhile, the impact of curing method on the hardened properties of 3D printed structures was accessed. Results indicated that the prepared tailing mortar achieved sufficient buildability to be used in an extrusion-typed 3D printer at the paste age of 45 min. The mould-cast specimens process flexural strength of 7.87 MPa. In contrast, the flexural strength of printed specimens values 5.22 MPa and 12.93 MPa, respectively, after the addition of 1.5% VMA and 90 °C steam curing.

Re-entrant jet causes cloud cavitation shedding, and cavitating vortical flow results in flow field instability. In the present work, a method of water injection is proposed to hinder re-entrant jet and suppress vortex in cloud cavitating flow of a NACA66 (MOD) hydrofoil (Re = 5.1 × 105, σ = 0.83). A combination of filter-based density corrected turbulence model (FBDCM) with the Zwart–Gerber–Belamri cavitation model (ZGB) is adopted to obtain the transient flow characteristics while vortex structures are identified by Q criterion & λ2 criterion. Results demonstrate that the injected water flow reduces the range of the low-pressure zone below 1940 Pa on the suction surface by 54.76%. Vortex structures are observed both inside the attached and shedding cavitation, and the water injection shrinks the vortex region. The water injection successfully blocks the re-entrant jet by generating a favorable pressure gradient (FPG) and effectively weakens the re-entrant jet intensity by 46.98%. The water injection shrinks the vortex distribution area near the hydrofoil suction surface, which makes the flow in the boundary layer more stable. From an energy transfer perspective, the water injection supplies energy to the near-wall flow, and hence keeps the steadiness of the flow field.

The current research was conducted to study the qualitative analysis and antimicrobial activity of different extracts of Viscum. album L. Screening of Viscum album for their chemicals was led by familiar qualitative procedures, which exposed the existence of a number of bioactive compounds including alkaloids, saponins, tannins, flavonoids, terpenoids, steroids, reducing sugar and phenols. The antimicrobial activities were investigated by disc diffusion method. Investigation of the data discovered that all of the five extracts of Viscum album stems, leaves and fruit showed diverse range of antimicrobial activities. Ethyl acetate, butanol, water and crude extracts showed maximum inhibitory effects against all the microbial species. Especially, Gram-positive bacterial and fungal pathogen. The most liable, gram-positive bacteria were Bacillus subtilis, Bacillus atrophaeus and Staphylococcus aureus, which were repressed by all extracts except n-hexane. The most susceptible gram-negative bacterial species were Escherichia coli, Erwinia carotovora and Agrobacterium tumefaciens where as the most resilient gram-negative bacterium was Salmonella typhi. The results have also supported the practice of aqueous extract were found to be in effect against Salmonella typhi and Escherichia coli. Thus, our findings have provided support for the use of Viscum album stems, leaves and fruit in traditional medicines.

Prior studies have shown that the levels of some platelet (PLT) indices were associated with mortality in patients undergoing hemodialysis. We aimed to investigate whether the changes in PLT indices associated with mortality in patients on peritoneal dialysis (PD). A single-center, retrospective observational cohort study was conducted in incident PD patients from 1 January 2006 to 31 December 2012, and followed up until 31 December 2014. Cox proportional hazard models were used to examine the relationships between the levels of PLT indices including PLT, plateletcrit (PCT), mean platelet volume (MPV), platelet distribution width (PDW), platelet large cell ratio (PLCR), and mortality. Of 1324 patients, 276 (20.8%) died during follow-up (median, 37; IQR, 3–107.4 months), among which 134 were due to cardiovascular diseases (CVD). The highest tertile of PLT levels at baseline was associated with increased risk for cardiovascular mortality after adjustment for demographic, clinical characteristics, and laboratory variables (hazard ratio [HR]:1.93; 95% confidence interval [CI]: 1.16–3.20). The similar treads were also observed in the middle and the highest tertile of the PCT level (HR: 1.68, 95%CI: 1.00–2.81 and HR: 1.89, 95%CI: 1.14–3.14, respectively). In addition, the highest tertile of PCT was associated with increased all-cause mortality (HR: 1.41, 95%CI: 1.01–1.96). However, none of the associations in MPV, PDW, and PLCR analyses reached statistical significance (HR: 0.71, 95%CI: 0.43–1.16; HR: 0.72, 95%CI: 0.45–1.18 and HR: 0.74, 95%CI: 0.46–1.19, respectively). These results suggest that higher PLT and PCT may be associated with higher risk for cardiovascular mortality in incident PD patients. Additional studies are needed to investigate whether correction of these two PLT indices reduces the risk.

Quinoa (Chenopodium quinoa Willd.) grain is well known as a source of nutritious human food, but the nutritional properties of quinoa as animal fodder has not been well explored. Fifteen quinoa accessions were assessed for grain and forage yields, and morphological and quality traits during anthesis and grain filling, with the aim of selecting superior genotypes for greater production and quality traits that are well adapted to northeastern China. Variations were significant among the tested genotypes for all traits. The highest grain weight was recorded in Rainbow (27.51 g plant−1), followed by the local Chinese genotypes Longli 3, YY28 and Mengli 1. Correlation analysis revealed a significant positive association of grain yield with branches and a negative association with culm thickness and inflorescence length, whereas more branches and moderate plant height were the main yield components affecting yield. Forage shoot weight was 37.2–81.6 g plant−1, with JQ3 and ZQ1 exhibiting the highest yields. Forage yield was strongly and positively correlated with most of the morphological traits, except plant height, and was negatively associated with chlorophyll content and the fresh/dry matter ratio. Quality traits and the neutral detergent fiber (NDF) and acid detergent fiber (ADF) contents of quinoa were significantly lower than alfalfa (Medicago sativa L.), oats (Avena sativa L.) or Leymus chinensis (Trin.) Tzvel, and the crude protein (CP) content was significantly higher than all three species, reaching above 20%. The saponin content of the whole plant was higher during anthesis than during grain filling. In conclusion, genotypes having more branches and shorter and more compact main inflorescences achieved higher grain yields, whereas genotypes possessing thick stems, more branches and moderate plant height produced more forage. Hence, the results indicate that superior quinoa genotypes have great potential to solve fodder shortages in China.

Mercury (Hg) is a ubiquitous environmental toxicant that has caused global concern due to its persistence and bioaccumulation in the environment. Wet deposition is a crucial Hg input for both terrestrial and aquatic environments and is a significant indicator for evaluating the effectiveness of anthropogenic Hg control. Rainwater samples were collected from May 2014 to October 2018 in Chongming Island to understand the multi-year Hg wet deposition characteristics. The annual Hg wet deposition flux ranged from 2.6 to 9.8 μg m−2 yr−1 (mean: 4.9 μg m−2 yr−1). Hg wet deposition flux in Chongming was comparable to the observations at temperate and subtropical background sites (2.0–10.2 μg m−2 yr−1) in the northern hemisphere. Hg wet deposition flux decreased from 8.6 μg m−2 yr−1 in 2014–2015 to 3.8 μg m−2 yr−1 in 2016 and was attributed to a decrease in the volume-weighted mean (VWM) Hg concentration (−4.1 ng L−1 yr−1). The reduced VWM Hg was explained by the decreasing atmospheric Hg and anthropogenic emissions reductions. The annual Hg wet deposition flux further decreased from 3.8 μg m−2 in 2016 to 2.6 μg m−2 in 2018. The reduction of warm season (April–September) rainfall amounts (356–845 mm) mainly contributed to the Hg wet deposition flux reduction during 2016–2018. The multi-year monitoring results suggest that long-term measurements are necessary when using wet deposition as an indicator to reflect the impact of anthropogenic efforts on mercury pollution control and meteorological condition variations.

During July 2015, physicians at a hospital in Beijing, China, diagnosed rabies in 2 patients who had each received a kidney from a common organ donor who had died from acute progressive encephalitis of unknown cause. The patients had rabies incubation periods of 42 and 48 days. Altered mental status developed in both patients and progressively worsened to deep coma within 80 days after transplantation; both patients died. Two other transplant recipients received corneas but remained well after receiving timely rabies prophylaxis. An effective regulatory system for testing donors should be implemented to decrease the occurrence of donor-derived infectious diseases. In addition, health education should be improved to enhance public awareness of transplant-associated infectious diseases. Transplant recipients and other persons with exposure to organs or tissues from donors with rabies must be provided consistent health monitoring and follow-up, including rabies postexposure prophylaxis; any remaining organs and tissues must be quarantined and not transplanted.

Endo-1,3-β-glucanases derived from marine mollusks have attracted much attention in recent years because of their unique transglycosylation activity. In this study, a novel endo-1,3-β-glucanase from the scallop Chlamys farreri, named Lcf, was biochemically characterized. Unlike in earlier studies on marine mollusk endo-1,3-β-glucanases, Lcf was expressed in vitro first. Enzymatic analysis demonstrated that Lcf preferred to hydrolyze laminarihexaose than to hydrolyze laminarin. Furthermore, Lcf was capable of catalyzing transglycosylation reactions with different kinds of glycosyl acceptors. More interestingly, the transglycosylation specificity of Lcf was different from that of other marine mollusk endo-1,3-β-glucanases, although they share a high sequence identity. This study enhanced our understanding of the diverse enzymatic specificities of marine mollusk endo-1,3-β-glucanases, which facilitated development of a unique endo-1,3-β-glucanase tool in the synthesis of novel glycosides.

Identifying suitable salt stress-tolerant phenotypes based on their agronomic and physiological traits remains a herculean task in forage-type oat (Avena sativa L.) breeding. This study examined the responses of six forage-type oat cultivars under four levels of saline stress over the vegetative growth cycle. Crop growth, water status-related traits and nitrogen status-related traits were analyzed in different plant parts to evaluate effective approaches for identifying salt tolerance. Plant biomass, height, tiller number and culm thickness changed substantially during salinity, but they were not precise enough for use in estimating genotypic salinity tolerance during long-term stress. Genotypes bearing larger numbers of tillers showed greater sensitivity to salinity due to its effects on biomass loss. Tolerant genotypes exhibited higher relative shoot biomass together with higher water use efficiency. The concentrations of Na+, K+ and their ratio, combined with the δ13C in shoots and roots were effective indicators for estimating tolerant genotypes through better water maintenance. N concentrations of shoots were the most efficient for evaluating genotypic tolerance. Low nitrate reductase (NR) and glutamine synthetase (GS) activity might be key factors limiting N accumulation. Chlorophyll (Chl) content and net photosynthetic rate, as well as stomatal conductance and evaporation, were useful for identifying salinity tolerance physiological mechanisms, but the effectiveness was low for genotypic tolerance testing for forage type oats due to the interaction between genotypes and salinity levels. The selection of high salinity-tolerant genotypes should focus on genotypes with photosynthetic resilience to salt, followed by high N metabolism (higher NR and GS activities) to ensure accumulation of more N in the shoot dry matter.

Almost 30 years have passed since the first publication reporting regeneration of transformed peach plants. Nevertheless, the general applicability of genetic transformation of this species has not yet been established. Many strategies have been tested in order to obtain an efficient peach transformation system. Despite the amount of time and the efforts invested, the lack of success has significantly limited the utility of peach as a model genetic system for trees, despite its relatively short generation time; small, high-quality genome; and well-studied genetic resources. Additionally, the absence of efficient genetic transformation protocols precludes the application of many biotechnological tools in peach breeding programs. In this review, we provide an overview of research on regeneration and genetic transformation in this species and summarize novel strategies and procedures aimed at producing transgenic peaches. Promising future approaches to develop a robust peach transformation system are discussed, focusing on the main bottlenecks to success including the low efficiency of A. tumefaciens-mediated transformation, the low level of correspondence between cells competent for transformation and those that have regenerative competence, and the high rate of chimerism in the few shoots that are produced following transformation.

Knowledge of the function of the ear as a key organ in the uptake, remobilization and partitioning of nitrogen is essential for understanding its contribution to grain filling and thus guiding future breeding strategies. In this work, four Chinese winter wheat genotypes were grown on a 15N-enriched nutrient solution. N absorption and further remobilization to the flag leaf, the ear and the mature grains were calculated via the 15N atom % excess. The results indicated that the high yields of the Chinese wheat genotype were determined by higher grain numbers per ear, with greater plant height and a larger ear size, while the thousand-grain weight did not affect grain yield. In the mature grains, 66.7% of total N was remobilized from the pre-anthesis accumulation in the biomass, while the remaining 33.3% was derived from the N taken up during post-anthesis. From anthesis to 2 weeks after the anthesis stage, the flag leaf remobilized 3.67 mg of N outwards and the ear remobilized 3.87 mg of N inwards from the pre-anthesis accumulation in each plant. The positive correlation between ear Nrem and grain Nrem indicated that the ear was an important organ for providing N to the grain, whereas the remobilized N stream from the leaves was not correlated with grain Nrem, thus indicating that flag leaf N was not translocated directly to the grain. The grain Nrem was negatively correlated with the ear N concentration throughout grain filling, which suggested that higher-yielding genotypes had better sink activity in the ear, while Rubisco played a critical role in N deposition. Therefore, to improve yield potential in wheat, the N accumulation in the ear and the subsequent remobilization of that stored N to the grains should be considered. N accumulation and remobilization in the ear may at least be valuable for Chinese breeding programs that aim at optimizing the sink/source balance to improve grain filling.

Leaf variegation is an ornamental trait that is not only biologically but also economically important. In our previous study, a Mg-protoporphyrin IX monomethyl ester cyclase homologue, EaZIP (Epipremnum aureum leucine zipper) was found to be associated with leaf variegation in Epipremnum aureum (Linden & Andre) G.S. Bunting. The protein product of this nuclear-encoded gene is targeted back to chloroplast involving in chlorophyll biosynthesis. Based on a web-based homology analysis, the EaZIP was found to lack a chloroplast transit peptide (cTP) sequence. In the present study, we tested if overexpression of the EaZIP cDNA with or without the cTP sequence could affect leaf variegation. Transgenic tobacco plants overexpressing EaZIP genes with (EaZIPwcTP) and without (EaZIPwocTP) cTP sequence were generated. Many plant lines harboring EaZIPwocTP showed variegated leaves, while none of the plant lines with EaZIPwcTP produced such a phenotype. Molecular analysis of T0 plants and selfed T1 progeny, as well as observations of tagged marker GFP (green fluorescent protein) did not show any other difference in patterns of gene integrity and expression. Results from this study indicate that transgenic approach for expressing EaZIPwocTP could be a novel method of generating variegated plants even through the underlying mechanisms remain to be elucidated.

A simple and rapid dual-wavelength spectroscopic method is used for simultaneous determination of pentoses and hexoses in the prehydrolyzate from lignocellulosic biomass. The method is based on the following reaction mechanism: in the solution of hydrochloric acid, phloroglucinol gives color reaction with sugars or their degradation products, showing maximum absorbance at 553 nm and 410 nm. Based on dual-wavelength spectrophotometric measurement, the pentoses and hexoses can separately be quantified. It was found that the derivatives from these two different sugars have an isosbestic point at 425 nm. According to the validation results, high accuracy and reasonable recovery rate is shown with the present method (pentoses recovery 97.1 to 100.0%, hexoses recovery 97.2 to 102.0%). Additionally, the interferences from substances including lignin, furfural, 5-hydroxymethyl furfural (HMF), glucuronic acid, and galacturonic acid are insignificant. All of the above results illustrate the suitability of this method for analyzing sugars in the lignocelluloses prehydrolyzate, especially hardwoods or herbaceous plants, based on forest-related biorefinery research.

Given the growing challenges to food and eco-environmental security as well as sustainable development of animal husbandry in the farming and pastoral areas of northeast China, it is crucial to identify advantageous intercropping modes and some constraints limiting its popularization. In order to assess the performance of various intercropping modes of maize and alfalfa, a field experiment was conducted in a completely randomized block design with five treatments: maize monoculture in even rows, maize monoculture in alternating wide and narrow rows, alfalfa monoculture, maize intercropped with one row of alfalfa in wide rows and maize intercropped with two rows of alfalfa in wide rows. Results demonstrate that maize monoculture in alternating wide and narrow rows performed best for light transmission, grain yield and output value, compared to in even rows. When intercropped, maize intercropped with one row of alfalfa in wide rows was identified as the optimal strategy and the largely complementary ecological niches of alfalfa and maize were shown to account for the intercropping advantages, optimizing resource utilization and improving yield and economic incomes. These findings suggest that alfalfa/maize intercropping has obvious advantages over monoculture and is applicable to the farming and pastoral areas of northeast China.

Chromosome instability (CIN) is observed in most solid tumors and is linked to somatic mutations in genome integrity maintenance genes. The spectrum of mutations that cause CIN is only partly known and it is not possible to predict a priori all pathways whose disruption might lead to CIN. To address this issue, we generated a catalogue of CIN genes and pathways by screening ∼ 2,000 reduction-of-function alleles for 90% of essential genes in Saccharomyces cerevisiae. Integrating this with published CIN phenotypes for other yeast genes generated a systematic CIN gene dataset comprised of 692 genes. Enriched gene ontology terms defined cellular CIN pathways that, together with sequence orthologs, created a list of human CIN candidate genes, which we cross-referenced to published somatic mutation databases revealing hundreds of mutated CIN candidate genes. Characterization of some poorly characterized CIN genes revealed short telomeres in mutants of the ASTRA/TTT components TTI1 and ASA1. High-throughput phenotypic profiling links ASA1 to TTT (Tel2-Tti1-Tti2) complex function and to TORC1 signaling via Tor1p stability, consistent with the role of TTT in PI3-kinase related kinase biogenesis. The comprehensive CIN gene list presented here in principle comprises all conserved eukaryotic genome integrity pathways. Deriving human CIN candidate genes from the list allows direct cross-referencing with tumor mutational data and thus candidate mutations potentially driving CIN in tumors. Overall, the CIN gene spectrum reveals new chromosome biology and will help us to understand CIN phenotypes in human disease.

Uveal melanoma is the most common intraocular malignant tumor in adults. For patients presenting with cataracts and glaucoma, it is recommended to assess whether an intraocular lesion is present as the primary cause. The present study describes the case of a 52-year-old man with primary intraocular malignant melanoma. The patient experienced painless vision loss in the right eye for 1 year, with recent onset of eye swelling and pain in the week prior to seeking medical attention. A slit-lamp examination revealed a shallow anterior chamber in the right eye, a visibly opaque lens and a faint reflection of the tumor surface in the vitreous humor. In addition, the intraocular pressure of this eye was >60 mmHg. Magnetic resonance imaging revealed a large tumor behind the lens measuring 16x18x14 mm. Pathological examination confirmed the diagnosis of malignant melanoma. No BRCA-associated protein-1 somatic mutation was detected, whereas germline mutations of MutL protein homolog 1, RAD54 like, and SWI/SNF related, matrix associated, actin dependent regulator of chromatin, subfamily a, member 4 were identified. Extensive systemic examination excluded the possibility that the tumors originated from another part of the body. The present case report highlights the crucial role of slit-lamp examination in the detection of ocular tumors. It is advocated that for patients presenting with cataracts, attention should be paid to the possibility of intraocular tumors. Meticulous slit-lamp microscopy may reveal a reflection of the surface of a malignant melanoma, preventing misdiagnosis. [ABSTRACT FROM AUTHOR]