Search

A major objective of the Mars 2020 mission is to sample rocks in Jezero crater that may preserve organic matter for later return to Earth. Using an ultraviolet Raman and luminescence spectrometer, the Perseverance rover detected luminescence signals with maximal intensities at 330 to 350 nanometers and 270 to 290 nanometers that were initially reported as consistent with organics. Here, we test the alternative hypothesis that the 330- to 350-nanometer and 270- to 290-nanometer luminescence signals trace Ce 3+ in phosphate and silicate defects, respectively. By comparing the distributions of luminescence signals with the rover detections of x-ray fluorescence from P 2 O 5 and Si-bearing materials, we show that, while an organic origin is not excluded, the observed luminescence can be explained by purely inorganic materials. These findings highlight the importance of eventual laboratory analyses to detect and characterize organic compounds in the returned samples.

Hydrophobic surfaces require finely tuned process chains due to the scale, complexity, and patterning methods. For this purpose, vat photopolymerization (VPP) additive manufacturing is a promising method for surface generation; however, together with the fabrication process, the design phase needs to be optimized to achieve the desired surface property. This work presents the influence of the design features of hydrophobic surfaces through multiple studies on simple pillar structures, intrinsic single-unit geometries, and surface deposition on complex substrates. The results showed that depending on the dimensions of single pillar dimensions, wetting properties can extend between the contact angles (CA) of 83°-115.11°. The hydrophobicity was further increased by applying a re-entrant structure, reaching the CA of 115.24°. The surface deposition on the complex substrates significantly increased water droplet adhesion, preventing it from rolling off, which can be beneficial for manifold device protection from the hazardous influence of the environment. In addition, the influence of the surface on the acoustic properties was examined, which showed that the pattern application in the real-life device does not have a detrimental effect on the intrinsic functionality. This study showed that the design phase should be an essential part of the VPP process chain as it significantly influences the wetting properties of the surfaces., (Copyright 2023, Mary Ann Liebert, Inc., publishers.)

Objective: 3-D printing offers convenient and low-cost mastoidectomy training; nonetheless, training benefits using 3-D-printed temporal bones remain largely unexplored. In this study, we have collected validity evidence for a low-cost, 3-D-printed temporal bone for mastoidectomy training and established a credible pass/fail score for performance on the model., Study Design: A prospective educational study gathering validity evidence using Messick's validity framework., Setting: Seven Danish otorhinolaryngology training institutions., Participants: Eighteen otorhinolaryngology residents (novices) and 11 experienced otosurgeons (experts)., Intervention: Residents and experienced otosurgeons each performed two to three anatomical mastoidectomies on a low-cost, 3-D-printed temporal bone model produced in-house. After drilling, mastoidectomy performances were rated by three blinded experts using a 25-item modified Welling scale (WS)., Main Outcome Measure: Validity evidence using Messick's framework including reliability assessment applying both classical test theory and Generalizability theory., Results: Novices achieved a mean score of 13.9 points; experienced otosurgeons achieved 23.2 points. Using the contrasting groups method, we established a 21/25-point pass/fail level. The Generalizability coefficient was 0.91, and 75% of the score variance was attributable to participant performance, indicating a high level of assessment reliability. Subsequent D studies revealed that two raters rating one performance or one rater rating two performances were sufficiently reliable for high-stakes assessment., Conclusion: Validity evidence supports using a low-cost, 3-D-printed model for mastoidectomy training. The model can be printed in-house using consumer-grade 3-D printers and serves as an additional training tool in the temporal bone curriculum. For competency-based training, we established a cut-off score of 21 of 25 WS points using the contrasting groups method., Competing Interests: The authors disclose no conflicts of interest., (Copyright © 2023, Otology & Neurotology, Inc.)

Background: 3D-printed temporal bone models can potentially provide a cost-effective alternative to cadaver surgery that can be manufactured locally at the training department. The objective of this study was to create a cost-effective 3D-printed model suitable for mastoidectomy training using entry level and commercially available print technologies, enabling individuals, without prior experience on 3D-printing, to manufacture their own models for basic temporal bone training., Methods: Expert technical professionals and an experienced otosurgeon identified the best material for replicating the temporal bone and created a cost-effective printing routine for the model using entry-level print technologies. Eleven participants at a temporal bone dissection course evaluated the model using a questionnaire., Results: The 3D-printed temporal bone model was printed using a material extrusion 3D-printer with a heat resistant filament, reducing melting during drilling. After printing, a few simple post-processing steps were designed to replicate the dura, sigmoid sinus and facial nerve. Modifying the 3D-printer by installing a direct-drive and ruby nozzle resulted in more successful prints and less need for maintenance. Upon evaluation by otorhinolaryngology trainees, unanimous feedback was that the model provided a good introduction to the mastoidectomy procedure, and supplementing practice to cadaveric temporal bones., Conclusion: In-house production of a cost-effective 3D-printed model for temporal bone training is feasible and enables training institutions to manufacture their own models. Further, this work demonstrates the feasibility of creating new temporal bone models with anatomical variation to provide ample training opportunity., (© 2023. The Author(s).)

Objective: Mastoidectomy is a cornerstone in the surgical management of middle and inner ear diseases. Unfortunately, training is challenged by insufficient access to human cadavers. Three-dimensional (3D) printing of temporal bones could alleviate this problem, but evidence on their educational effectiveness is lacking. It is largely unknown whether training on 3D-printed temporal bones improves mastoidectomy performance, including on cadavers, and how this training compares with virtual reality (VR) simulation. To address this knowledge gap, this study investigated whether training on 3D-printed temporal bones improves cadaveric dissection performance, and it compared this training with the already-established VR simulation., Study Design: Prospective cohort study of an educational intervention., Setting: Tertiary university hospital, cadaver dissection laboratory, and simulation center in Copenhagen, Denmark., Methods: Eighteen otorhinolaryngology residents (intervention) attending the national temporal bone dissection course received 3 hours of mastoidectomy training on 3D-printed temporal bones. Posttraining cadaver mastoidectomy performances were rated by 3 experts using a validated assessment tool and compared with those of 66 previous course participants (control) who had received time-equivalent VR training prior to dissection., Results: The intervention cohort outperformed the controls during cadaver dissection by 29% ( P < .001); their performances were largely similar across training modalities but remained at a modest level (~50% of the maximum score)., Conclusion: Mastoidectomy skills improved from training on 3D-printed temporal bone and seemingly more so than on time-equivalent VR simulation. Importantly, these skills transferred to cadaveric dissection. Training on 3D-printed temporal bones can effectively supplement cadaver training when learning mastoidectomy., (© The Authors 2021.)

Objective: 3D-printed models hold great potential for temporal bone surgical training as a supplement to cadaveric dissection. Nevertheless, critical knowledge on manufacturing remains scattered, and little is known about whether use of these models improves surgical performance. This systematic review aims to explore (1) methods used for manufacturing and (2) how educational evidence supports using 3D-printed temporal bone models., Data Sources: PubMed, Embase, the Cochrane Library, and Web of Science., Review Methods: Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, relevant studies were identified and data on manufacturing and validation and/or training extracted by 2 reviewers. Quality assessment was performed using the Medical Education Research Study Quality Instrument tool; educational outcomes were determined according to Kirkpatrick's model., Results: The search yielded 595 studies; 36 studies were found eligible and included for analysis. The described 3D-printed models were based on computed tomography scans from patients or cadavers. Processing included manual segmentation of key structures such as the facial nerve; postprocessing, for example, consisted of removal of print material inside the model. Overall, educational quality was low, and most studies evaluated their models using only expert and/or trainee opinion (ie, Kirkpatrick level 1). Most studies reported positive attitudes toward the models and their potential for training., Conclusion: Manufacturing and use of 3D-printed temporal bones for surgical training are widely reported in the literature. However, evidence to support their use and knowledge about both manufacturing and the effects on subsequent surgical performance are currently lacking. Therefore, stronger educational evidence and manufacturing knowhow are needed for widespread implementation of 3D-printed temporal bones in surgical curricula.

Introduction: Circulating immature precursor cells indicate malignant diseases like acute myeloid or lymphoid leukemia, and blast cells are key finds for disease management. Automatized cell counters are an essential contemporary appliance for blast detection, but false-positive samples remain challenging in terms of time and resources. To reduce this issue, the White Precursor Channel (WPC) was introduced to Sysmex XN series; however, sensitivity may reduce when accommodating low specificity. Therefore, our aim was to evaluate WPC blast alarm flag performance with regard to detecting blast cells., Methods: At two major Danish hospitals, random blood samples were collected from the routine setting   in a four-week period and analyzed on WPC XN20 (Sysmex, Japan). Results were compared with manual differential white blood cell count (Manual WBCC) assisted by CellaVisionDM96., Results: In 117 samples, we found 0.2 to 34.4% blasts, WPC blast flag specificity = 82% and a low sensitivity = 40%. However, other XN alarm flags forwarded samples to Manual WBCC, so blast cells were detected despite missing a specific blast flag: With all alarm flags, combined sensitivity increased to 88%. Overall, the WPC application stopped 18% of the 117 samples going to Manual WBCC (three false negatives). Q values are arbitrary probability measurements for the blast flag, and in five samples (0.5 to 47.3% blasts) imprecision ranged from 5.3 to 122 CV%., Conclusions: WPC blast alarm flags are imprecise and inaccurate, especially when blast counts are low. However, the XN20 will alarm samples with other flags so that most samples containing blast cells will be manually reviewed after all. Hence, the presented flag types should not bias the decisions of manual reviewers., (© 2020 John Wiley & Sons Ltd.)

Objective: Crosstalk between adipocytes and local neurons may be an important regulatory mechanism to control energy homeostasis. We previously reported that perturbation of adipocyte de novo lipogenesis (DNL) by deletion of fatty acid synthase (FASN) expands sympathetic neurons within white adipose tissue (WAT) and stimulates the appearance of "beige" adipocytes. Here we tested whether WAT DNL activity can also influence neuronal regulation and thermogenesis in brown adipose tissue (BAT)., Methods and Results: Induced deletion of FASN in all adipocytes in mature mice (iAdFASNKO) enhanced sympathetic innervation and neuronal activity as well as UCP1 expression in both WAT and BAT. This increased sympathetic innervation could be observed at both 22 °C and 30 °C, indicating it is not a response to heat loss but rather adipocyte signaling. In contrast, selective ablation of FASN in brown adipocytes of mice (iUCP1FASNKO) failed to modulate sympathetic innervation and the thermogenic program in BAT. Surprisingly, DNL in brown adipocytes was also dispensable in maintaining euthermia when UCP1FASNKO mice were cold-exposed., Conclusion: These results indicate that DNL in white adipocytes influences long distance signaling to BAT, which can modify BAT sympathetic innervation and expression of genes involved in thermogenesis., (Copyright © 2018 The Authors. Published by Elsevier GmbH.. All rights reserved.)

The purpose of this paper is to present the method of a soft tooling process chain employing Additive Manufacturing (AM) for fabrication of injection molding inserts with micro surface features. The Soft Tooling inserts are manufactured by Digital Light Processing (vat photo polymerization) using a photopolymer that can withstand relatively high temperaturea. The part manufactured here has four tines with an angle of 60°. Micro pillars (Ø200 µm, aspect ratio of 1) are arranged on the surfaces by two rows. Polyethylene (PE) injection molding with the soft tooling inserts is used to fabricate the final parts. This method demonstrates that it is feasible to obtain injection-molded parts with microstructures on complex geometry by additive manufactured inserts. The machining time and cost is reduced significantly compared to conventional tooling processes based on computer numerical control (CNC) machining. The dimensions of the micro features are influenced by the applied additive manufacturing process. The lifetime of the inserts determines that this process is more suitable for pilot production. The precision of the inserts production is limited by the additive manufacturing process as well.

Background: The de novo biosynthesis of fatty acids (DNL) through fatty acid synthase (FASN) in adipocytes is exquisitely regulated by nutrients, hormones, fasting, and obesity in mice and humans. However, the functions of DNL in adipocyte biology and in the regulation of systemic glucose homeostasis are not fully understood., Methods & Results: Here we show adipocyte DNL controls crosstalk to localized sympathetic neurons that mediate expansion of beige/brite adipocytes within inguinal white adipose tissue (iWAT). Induced deletion of FASN in white and brown adipocytes of mature mice (iAdFASNKO mice) enhanced glucose tolerance, UCP1 expression, and cAMP signaling in iWAT. Consistent with induction of adipose sympathetic nerve activity, iAdFASNKO mice displayed markedly increased neuronal tyrosine hydroxylase (TH) and neuropeptide Y (NPY) content in iWAT. In contrast, brown adipose tissue (BAT) of iAdFASNKO mice showed no increase in TH or NPY, nor did FASN deletion selectively in brown adipocytes (UCP1-FASNKO mice) cause these effects in iWAT., Conclusions: These results demonstrate that downregulation of fatty acid synthesis via FASN depletion in white adipocytes of mature mice can stimulate neuronal signaling to control thermogenic programming in iWAT.

The photoionization efficiency spectra of gas-phase Nb 3 CO and Nb 3 (CO) 2 have been acquired using a laser-ablation, photoionization mass spectrometer. The adiabatic ionization energies of the species are 5.82 ± 0.02 and 5.85 ± 0.02 eV, respectively, where error bars reflect precision, the values are accurate to within 0.1 eV. From these data and literature values of cation bond strengths, the bond energies of Nb 3 -CO and Nb 3 CO-CO are found to lie within the 2.8-3.4 and 1.7-1.8 eV ranges, respectively. The former is most consistent with dissociatively adsorbed CO, while the latter may correspond to molecularly or dissociatively adsorbed CO. These conclusions are supported by density-functional theory calculations. In addition to properties of Nb 3 CO, the properties of the transition state to dissociative adsorption of CO have been calculated. It is found that the transition state lies lower in energy than the separated reagents. Spontaneous dissociation is expected to follow molecular adsorption of CO on Nb 3 , accordingly. Over the 1540-2220 cm -1 range, no infrared multiphoton dissociation of Nb 3 CO or Nb 3 (CO) 2 is observed, consistent with CO being dissociatively adsorbed for both species.