Search

By combining in the same molecule Ras-interacting aromatic moieties and a sugar, we prepared a water-soluble Ras ligand that binds Ras and inhibits guanine nucleotide exchange. With this compound it was possible to determine experimentally by a (15)N-edited HSQC NMR experiment the ligand-Ras binding interface.

To shed light on the molecular features related to cold-adaptation in serine-proteases, we have carried out molecular dynamics simulations of homologous mesophilic and psychrophilic trypsins, with particular attention to evaluation of intramolecular interactions and flexibility. Psychrophilic trypsins present fewer interdomain interactions and enhanced localized flexibility in regions close to the catalytic site. Notably, these regions fit well with the pattern of protein flexibility previously reported for psychrophilic elastases. Our results indicate that specific sites within the serine-protease fold can be considered hot spots of cold-adaptation and that psychrophilic trypsins and elastases have independently discovered similar molecular strategies to optimize flexibility at low temperatures.

Condensation of Fe(2)(SH)(2)(CO)(6), acetaldehyde, and (NH(4))(2)CO(3) affords the methyl-substituted azadithiolate Fe(2)[(SCHMe)(2)NH](CO)(6) (1). The complex exists mainly (~95%) as the meso diastereomer, but the d,l diastereoisomers could be detected. DFT calculations predict that the meso isomer would be 2.5 kcal/mol more stable than the d,l isomer due to conventional nonbonding interactions between the methyl groups and the ring hydrogen atoms. Crystallographic analysis of meso-1 confirms that the two methyl groups are equatorial, constraining the diferraazadithiolate bicycle to a conformation that desymmetrizes the diiron center. The lowered symmetry is confirmed by the observation of two (13)C NMR signals in the FeCO region under conditions of fast turnstile rotation at the Fe(CO)(3) groups. The pK(a) value of the amine in 1 is 7.89 (all pK(a)'s determined in MeCN solution), which is similar to a redetermined value for Fe(2)[(SCH(2))(2)NH](CO)(6) (2, pK(a) = 7.98) and only slightly less basic than the tertiary amine Fe(2)[(SCH(2))(2)NMe](CO)(6) (pK(a) = 8.14). Substitution of 1 with PMe(3) proceeded via the intermediacy of two isomers of Fe(2)[(SCHMe)(2)NH](CO)(5)(PMe(3)), affording Fe(2)[(SCHMe)(2)NH](CO)(4)(PMe(3))(2) (3). (31)P NMR spectra confirm that the two PMe(3) ligands in 3 are nonequivalent, consistent with the desymmetrizing effect of the dithiolate. The pK(a) value of the amine in 3 was found to be 11.3. Using triphenylphosphine, we prepared Fe(2)[(SCHMe)(2)NH](CO)(5)(PPh(3)) as a single regioisomer.

The new complexes Fe2(S2CnH2n)(CO)2(dppv)2 (n = 2, 3; dppv = cis-1,2-C2H2(PPh2)2) form adducts with AlBr3 and B(C6F5)3, which adopt the "rotated structure" proposed for the active site of the Fe-only hydrogenases--the propanedithiolate is significantly more Lewis basic due to nonbonded interactions between the dithiolate strap and the ligands on Fe.

Computational approaches based on Molecular Dynamics simulations, Quantum Mechanical methods and 3D Quantitative Structure-Activity Relationships were employed by computational chemistry groups at the University of Milano-Bicocca to study biological processes at the molecular level. The paper reports the methodologies adopted and the results obtained on Aryl hydrocarbon Receptor and homologous PAS proteins mechanisms, the properties of prion protein peptides, the reaction pathway of hydrogenase and peroxidase enzymes and the defibrillogenic activity of tetracyclines.

The protonation behavior of the iron hydrogenase active-site mimic [Fe2(mu-adt)(CO)4(PMe3)2] (1; adt=N-benzyl-azadithiolate) has been investigated by spectroscopic, electrochemical, and computational methods. The combination of an adt bridge and electron-donating phosphine ligands allows protonation of either the adt nitrogen to give [Fe2(mu-Hadt)(CO)4(PMe3)2]+ ([1 H]+), the Fe-Fe bond to give [Fe2(mu-adt)(mu-H)(CO)4(PMe3)2]+ ([1 Hy]+), or both sites simultaneously to give [Fe2(mu-Hadt)(mu-H)(CO)4(PMe3)2]2+ ([1 HHy]2 +). Complex 1 and its protonation products have been characterized in acetonitrile solution by IR, (1)H, and (31)P NMR spectroscopy. The solution structures of all protonation states feature a basal/basal orientation of the phosphine ligands, which contrasts with the basal/apical structure of 1 in the solid state. Density functional calculations have been performed on all protonation states and a comparison between calculated and experimental spectra confirms the structural assignments. The ligand protonated complex [1 H]+ (pKa=12) is the initial, metastable protonation product while the hydride [1 Hy]+ (pKa=15) is the thermodynamically stable singly protonated form. Tautomerization of cation [1 H]+ to [1 Hy]+ does not occur spontaneously. However, it can be catalyzed by HCl (k=2.2 m(-1) s(-1)), which results in the selective formation of cation [1 Hy]+. The protonations of the two basic sites have strong mutual effects on their basicities such that the hydride (pK(a)=8) and the ammonium proton (pK(a)=5) of the doubly protonated cationic complex [1 HHy]2+ are considerably more acidic than in the singly protonated analogues. The formation of dication [1 HHy]2+ from cation [1 H]+ is exceptionally slow with perchloric or trifluoromethanesulfonic acid (k=0.15 m(-1) s(-1)), while the dication is formed substantially faster (k>10(2) m(-1) s(-1)) with hydrobromic acid. Electrochemically, 1 undergoes irreversible reduction at -2.2 V versus ferrocene, and this potential shifts to -1.6, -1.1, and -1.0 V for the cationic complexes [1 H]+, [1 Hy]+, and [1 HHy]2+, respectively, upon protonation. The doubly protonated form [1 HHy]2+ is reduced at less negative potential than all previously reported hydrogenase models, although catalytic proton reduction at this potential is characterized by slow turnover.

The three-dimensional (3D) structure of the catalytic domain of Gas1p, a protein belonging to the only family of beta-(1,3)-glucan transferases so far identified in yeasts and some pathogenic fungi (family GH-72), has been predicted by combining results derived from threading methods, multiple sequence alignments and secondary-structure predictions. The 3D model has allowed the identification of several residues that are predicted to play a crucial role in structural integrity, substrate recognition and catalysis. In particular, the model of the catalytic domain can be useful for designing site-directed mutagenesis experiments and for developing inhibitors of Gas1p enzymatic activity.

The metal-sulphur active sites of hydrogenases catalyse hydrogen evolution or uptake at rapid rates. Understanding the structure and function of these active sites--through mechanistic studies of hydrogenases, synthetic assemblies and in silico models--will help guide the design of new materials for hydrogen production or uptake. Here we report the assembly of the iron-sulphur framework of the active site of iron-only hydrogenase (the H-cluster), and show that it functions as an electrocatalyst for proton reduction. Through linking of a di-iron subsite to a {4Fe4S} cluster, we achieve the first synthesis of a metallosulphur cluster core involved in small-molecule catalysis. In addition to advancing our understanding of the natural biological system, the availability of an active, free-standing analogue of the H-cluster may enable us to develop useful electrocatalytic materials for application in, for example, reversible hydrogen fuel cells. (Platinum is currently the preferred electrocatalyst for such applications, but is expensive, limited in availability and, in the long term, unsustainable.).

A bridging carbonyl intermediate with key structural elements of the diiron sub-site of all-iron hydrogenase has been experimentally observed in the CN/CO substitution pathway of the {2Fe3S} carbonyl precursor, [Fe(2)(CO)(5){MeSCH(2)C(Me)(CH(2)S)(2)}]. Herein we have used density functional theory (DFT) to dissect the overall substitution pathway in terms of the energetics and the structures of transition states, intermediates and products. We show that the formation of bridging CO transitions states is explicitly involved in the intimate mechanism of dicyanation. The enhanced rate of monocyanation of {2Fe3S} over the {2Fe2S} species [Fe(2)(CO)(6){CH(2)(CH(2)S)(2)}] is found to rest with the ability of the thioether ligand to both stabilise a mu-CO transition state and act as a good leaving group. In contrast, the second cyanation step of the {2Fe3S} species is kinetically slower than for the {2Fe2S} monocyanide because the Fe2 atom is deactivated by coordination of the electron-donating thioether group. In addition, hindered rotation and the reaction coordinate of the approaching CN(-) group, are other factors which explain reactivity differences in {2Fe2S} and {2Fe3S} systems. The intermediate species formed in the second cyanation step of {2Fe3S} species is a mu-CO species, confirming the structural assignment made on the basis of FT-IR data (S. J. George, Z. Cui, M. Razavet, C. J. Pickett, Chem. Eur. J. 2002, 8, 4037-4046). In support of this we find that computed and experimental IR frequencies of structurally characterised {2Fe3S} species and those of the bridging carbonyl intermediate are in excellent agreement. In a wider context, the study may provide some insight into the reactivity of dinuclear systems in which neighbouring group on-off coordination plays a role in substitution pathways.

We have applied density functional theory, using both pure (BP86) and hybrid (B3LYP and B3LYP*) functionals, to investigate structural parameters and reaction energies for nickel(II)-sulfur coordination compounds, as well as for small cluster models of the Ni-SI and Ni-R redox state of [NiFe] hydrogenases. Results obtained investigating experimentally well-characterized complexes show that BP86 is well suited to describe the structural features of this class of compounds. However, the singlet-triplet energy splitting and even the computed ground state are strongly dependent on the applied functional. Results for the cluster models of [NiFe] hydrogenases lead to the conclusion that in the reduced protein structures characterized by X-ray diffraction a hydride bridges the two metal centres. The energy splitting of the singlet and triplet states in Ni-R and Ni-SI models is calculated to be very small and may be overcome at room temperature to allow a spin crossover. Moreover, the relative stability of the Ni-SI and Ni-R structures adopted in the present investigation is fully compatible with their involvement in the reversible heterolytic cleavage of H(2).