Search

This study investigates groundwater resources in the El-Omayed area on the northwestern coast of Egypt. The aim is to assess the extent and severity of saltwater intrusion in the shallow aquifer system, as well as its potential impacts on groundwater resources. A combined geophysical and hydrochemical approach was adopted in this investigation. Across the study area, 32 vertical electrical soundings were conducted, along with two electrical resistivity tomography profiles. Sixteen water samples were collected, and then chemically analyzed to evaluate water quality, seawater intrusion, and source of salinity. The results of geophysical interpretation revealed the existence of a thin, shallow freshwater-bearing layer (42–95 Ω.m), predominantly situated in the central parts of the area, followed by saltwater saturated layers of (0.9–2.1 Ω.m) affected by the Mediterranean Sea invasion. The eastern portion of the aquifer also recorded a relatively high seawater intrusion. As evidenced by the actual data gathered from drilled wells, the study area can be divided into three distinct zones: fresh, brackish, and saltwater zones. The study identified the most suitable sites to establish new groundwater wells, in addition to identifying the source of salinity through the investigation of the geochemical properties of water samples.

Abstract Background The primary objective of the study was to evaluate the effects of SEC III (Splints, Class III Elastics, and Chin cup) protocol on the upper airway dimensions using lateral cephalometric radiographs. The secondary objectives were to evaluate the skeletal and dental effects of the SEC III protocol using lateral cephalometric radiographs. Methods The pre- and post-treatment lateral cephalometric radiographs of 24 patients treated using the SEC III protocol were used to address the aim of the study. Children in the pre-pubertal (CS-1 or CS-2) or circumpubertal (CS-3 or CS-4) skeletal maturation stage and having class III dentoskeletal malocclusion were included in the study. Patients with a history of previous orthodontic treatment, maxillofacial surgery or trauma, tonsillectomy, adenoidectomy, or craniofacial malformations were excluded. The pre-treatment and post-treatment lateral cephalometric radiographs were traced, then airway measurements, skeletal measurements, and dental measurements were performed. The results were analysed using paired samples t-test or Wilcoxon signed rank test according to the data normality. Results Data of 6 males and 18 females were analysed (Mean age = 11.21 ± 1.02 years). Duration of active treatment was 5.75 ± 1.03 months. Treatment using SEC III protocol resulted in a significant increase in ANB angle (2.92 ± 1.50 degrees, p

This study addresses the difficulties associated with parameter estimation in the generalized power unit half-logistic geometric distribution by employing a progressive Type-Ⅱ censoring technique. The study uses a variety of methods, including maximum likelihood, maximum product of spacing, and Bayesian estimation. The work investigates Bayesian estimators taking into account a gamma prior and a symmetric loss function while working with observed data produced by likelihood and spacing functions. A full simulation experiment is carried out with varying sample sizes and censoring mechanisms in order to thoroughly evaluate the various estimation approaches. The highest posterior density approach is employed in the study to compute credible intervals for the parameters. Additionally, based on three optimal criteria, the study chooses the best progressive censoring scheme from a variety of rival methods. The study examines two real datasets in order to confirm the applicability of the generalized power unit half-logistic geometric distribution and the efficacy of the suggested estimators. The results show that in order to generate the necessary estimators, the maximum product of the spacing approach is better than the maximum likelihood method. Furthermore, as compared to traditional methods, the Bayesian strategy that makes use of probability and spacing functions produces estimates that are more satisfactory.

Roselle calyces (Hibiscus sabdariffa L.) were evaluated through a critical study of existing research works on health benefits, mineral compositions, bioactive compositions, mechanisms, and possible research gaps. The use of roselle calyces as an alternative to synthetic food dyes, addressing growing global challenges of overweight, obesity, and cardiovascular diseases, was evaluated and encouraged. Studies indicate the attenuation of obesity by chlorogenic acid (the predominant phenolic compound in roselle calyx) via mechanisms associated with the UCP-1 and PGC-1α pathways, resulting in reduced blood lipid levels, reduced fat accumulation in the liver, and increased thermogenesis through fat metabolism. Minimum inhibitory concentration (MIC) of known bacteria and fungi, such as Listeria monocytogenes, Escherichia coli, Bacillus cereus, Salmonella typhimurium, Candida tropicalis, and Candida krusei, were studied. More research, however, needs to be conducted on organic acids present in roselle calyces to look into their possible applications and maximize their possible benefits.

Abstract The condensation of pyrrole-2,5-dicarbaldehyde (1) with 5-(2-amino-4-phenylthiazol-5-yl)-4-phenylthiazol-2-amine (2) and/or 5-(4-Amino-phenyl)-4-phenylthiazol-2-amine (3) gave new poly(Z)-N-((5-(iminomethyl)-1H-pyrrol-2-yl)methylene)-5-(2-((E)-(5-(iminomethyl)-I-pyrrol-2-yl)methyleneamino)-4-phenylthiazol-5-yl)-4-phenylthiaol-2-amine (P1) and/or poly(E)-N-((5-(iminomethyl)-1H-pyrrol-2-yl)methylene)-5-(4-((E)-(5-(iminomethyl)-1H-pyrrol-2-yl)methyleneamino)phenyl)-4-phenylthiaol-2-amine (P2) as a novel conjugated polymer by microwave irradiation and traditional heating.. It is evident that the microwave irradiation technique quickly raised the molecular weight of polyimines. In addition to quantifying the molecular weight of the resultant polyimines. All the polyimines were characterized using FTIR, XRD, H1NMR, TGA, and DSC. The optical characteristics of polyimine derivatives were investigated using a UV–Vis spectrophotometer. The absorption spectra showed a main absorption band around 372 nm for polyimine (P1) and 381 nm for polyimine (P2). The optical energy was calculated and found to be 2.49 and 2.68 eV. The photoluminescence of the polyimine derivatives was measured and analyzed by spectrofluorometer and Laser photoluminescence experiment and the emission color was studied using CIE graphs. The fluorescence spectra showed an emission peak at 548 nm for polyimine (P1) with yellow green color in CIE graph, while for polyimine (P2) the emission band was located at 440.5 nm with blue color in CIE graph. Photoluminescence quantum yield PLQY was measured for the polyimine P1 and P2 in both liquid and Solid states and indicated the AIE behavior of the polyimines. TD-DFT simulations were applied to the polyimine derivatives where the structures were geometrically optimized and the spectroscopic characterizations were evaluated.

Fertility preservation technologies have existed for decades, and the field is rapidly advancing; limited data exist regarding the use of these technologies by transgender patients. Many options are available for transgender patients who wish to preserve fertility before transitioning. These options include the cryopreservation of gametes, embryos, or ovarian tissue. Currently, ejaculated, or testicular sperm, immature oocytes, and ovarian tissue can be preserved for later use, but no such use option exists for immature testicular tissue. Many financial, sociological, and legal barriers and a lack of awareness among physicians and patients also hinders the utilization of these fertility preservation services. While options are abundant, usage rates are relatively low. The initial data regarding the successful use of preserved tissues appears promising, with birth rates not dissimilar to non-transgender patients. Further investigations into this area are needed. In addition, counseling regarding fertility preservation options should become a significant part of the provider-patient conversation before transitioning therapies.

Background: Foreign body ingestion is a common occurrence, particularly among children, but it can also affect adult patients. Objective: This case series study was to evaluate the presentation and outcome of accidentally ingested upper gastrointestinal foreign bodies. Material and Methods: The study included 45 patients with a history of ingested foreign body between January 2011 and June 2017 at the Dhonde Endoscopic and Laparoscopic Centre in Sangli. Results: The majority of cases (89%) were observed in the pediatric age group, with dysphagia being the most common presenting symptom (62.22%), followed by odynophagia (22.22%), drooling (11.11%), and a pricking sensation (4.45%). The cricopharynx and upper esophagus were identified as the most common sites of foreign body impaction, accounting for 97.8% of cases. Coins were found to be the predominant foreign bodies in children (90%), while mutton pieces were more common in older adults (40%). The management approach involved video gastroendoscopic retrieval, which was successful in the majority of cases. Only 8.88% of patients experienced complications, including chemical injury due to a button battery or pressure ulcer resulting from an impacted coin. Conclusion: Foreign body ingestion is a significant concern, especially in pediatric patients. Prompt and effective endoscopic retrieval can lead to favorable outcomes, with minimal complications. Awareness and understanding of foreign body ingestion can aid in timely intervention and improve patient outcomes.

The global prevalence of cardiovascular diseases (CVDs) as a leading cause of death highlights the imperative need for refined risk assessment and prognostication methods. The traditional approaches, including the Framingham Risk Score, blood tests, imaging techniques, and clinical assessments, although widely utilized, are hindered by limitations such as a lack of precision, the reliance on static risk variables, and the inability to adapt to new patient data, thereby necessitating the exploration of alternative strategies. In response, this study introduces CardioRiskNet, a hybrid AI-based model designed to transcend these limitations. The proposed CardioRiskNet consists of seven parts: data preprocessing, feature selection and encoding, eXplainable AI (XAI) integration, active learning, attention mechanisms, risk prediction and prognosis, evaluation and validation, and deployment and integration. At first, the patient data are preprocessed by cleaning the data, handling the missing values, applying a normalization process, and extracting the features. Next, the most informative features are selected and the categorical variables are converted into a numerical form. Distinctively, CardioRiskNet employs active learning to iteratively select informative samples, enhancing its learning efficacy, while its attention mechanism dynamically focuses on the relevant features for precise risk prediction. Additionally, the integration of XAI facilitates interpretability and transparency in the decision-making processes. According to the experimental results, CardioRiskNet demonstrates superior performance in terms of accuracy, sensitivity, specificity, and F1-Score, with values of 98.7%, 98.7%, 99%, and 98.7%, respectively. These findings show that CardioRiskNet can accurately assess and prognosticate the CVD risk, demonstrating the power of active learning and AI to surpass the conventional methods. Thus, CardioRiskNet’s novel approach and high performance advance the management of CVDs and provide healthcare professionals a powerful tool for patient care.

This work outlines conditions suitable for the heteroepitaxial growth of Cr2O3(0001) films (1.5–20 nm thick) on a Ru(0001)-terminated substrate. Optimized growth is achieved by sputter deposition of Cr within a 4 mTorr Ar/O2 20% ambient at Ru temperatures ranging from 450 to 600 °C. The Cr2O3 film adopts a 30° rotated honeycomb configuration with respect to the underlying Ru(0001) substrate and exhibits a hexagonal lattice parameter consistent with that for bulk Cr2O3(0001). Heating to 700 °C within the same environment during film preparation leads to Ru oxidation. Exposure to temperatures at or above 400 °C in a vacuum, Ar, or Ar/H2 3% leads to chromia film degradation characterized by increased Ru 3d XPS intensity coupled with concomitant Cr 2p and O 1s peak attenuations when compared to data collected from unannealed films. An ill-defined but hexagonally well-ordered RuxCryOz surface structure is noted after heating the film in this manner. Heating within a wet Ar/H2 3% environment preserves the Cr2O3(0001)/Ru(0001) heterolayer structure to temperatures of at least 950 °C. Heating an Ru–Cr2O3–Ru heterostacked film to 950 °C within this environment is shown by cross-sectional scanning/transmission electron microscopy (S/TEM) to provide clear evidence of retained epitaxial bicrystalline oxide interlayer structure, interlayer immiscibility, and epitaxial registry between the top and bottom Ru layers. Subtle effects marked by O enrichment and O 1s and Cr 2p shifts to increased binding energies are noted by XPS in the near-Ru regions of Cr2O3(0001)/Ru(0001) and Ru(0001)/Cr2O3(0001)/Ru(0001) films after annealing to different temperatures in different sets of environmental conditions. [ABSTRACT FROM AUTHOR]

Biosurfactants are surface-active molecules with unique qualities and various uses. Many microorganisms produce secondary metabolites with surface-active characteristics that serve various antiviral functions. The HIV and Zika viruses were chosen for this study because they can spread from mother to child and result in potentially fatal infections in infants. Halophilic bacteria from the Red Sea solar saltern in Egypt were screened using drop collapse, emulsification activity, and oil displacement assays to produce biosurfactants and emulsifiers. Halobacterium jilantaiense strain JBS1 was the most effective strain of the Halobacteriaceae family. It had the best oil displacement test and emulsification activity against kerosene and crude oil, respectively. Among the ten isolates, it produced the most promising biosurfactant, also recognized by the GC-MASS library. This study evaluated biosurfactants from halophilic bacteria as potential antiviral drugs. Some of the computer methods we use are molecular docking, ADMET, and molecular dynamics. We use model organisms like the HIV reverse transcriptase (PDB: 5VZ6) and the Zika virus RNA-dependent RNA polymerase (ZV-RdRP). Molecular docking and molecular dynamics make the best complexes with 5VZ6 HIV-RT and flavone (C25) and 5wz3 ZV-RdRP and ethyl cholate (C8). Testing for ADMET toxicity on the complex revealed that it is the safest medicine conceivable. The 5VZ6-C25 and 5wz3-C8 complexes also followed the Lipinski rule. They made five hydrogen bond donors and ten hydrogen bond acceptors with 500 Da MW and a 5:1 octanol/water partition coefficient. Finally, extreme settings require particular adaptations for stability, and extremophile biosurfactants may be more stable.

The Android operating system, with its market share leadership and open-source nature in smartphones, has become the primary target of malware. However, detecting malicious Android processes has become a significant challenge because of the complexity of size, length, and associations of various important and distinctive elements of Android applications, such as API calls and system calls. In this paper DL-AMDet, a deep learning architecture is proposed to detect Android malware applications based on its static and dynamic features. DL-AMDet consists of two main detection models the first one uses CNN-BiLSTM deep learning method for detecting malware using static analysis. The other model utilizes deep Autoencoders as an anomaly detection model to identify the malware based on dynamic analysis. The performance of the DL-AMDet architecture is evaluated using two different datasets. The results show that DL-AMDet achieves a competitive malware detection accuracy of 99.935 % for static and dynamic analysis models combined. Additionally, the results emphasize the significance of CNN-BiLSTM and Deep Autoencoders models used in DL-AMDet to outperform the existing state-of-the-art techniques.

African horse sickness (AHS) is a non-contagious arthropod-borne infectious disease of Equidae. Because of its severity and quick spread, It is cosidered as a notifiable disease. The current study intended to look into the current suitation of the vector-borne African horse sickness virus (AHSV) in Egypt, determine viral seroprevelance, and assess the associated risk factors. In this context, 2739 sera and 150 spleen samples were collected from different Egyptian governorates and tested for AHSV screening. The sera were investigated for presence of antibodies against AHSV whilst spleen samples were tested for AHSV Ag and RNA detection. The obtained results revealed that all 2739 sera samples tested negative for AHSV antibodies. Furthermore, using ELISA and conventional reverse-transcription polymerase chain reaction (RT-PCR), to identify AHSV Ag and nucleic acid, the 150 tested spleen samples gave negative results with both assays. In conclusion, the recorded results indicated the absence of antibodies, antigen, and viral nucleic acid of AHSV in all tested samples which proved that there is no circulating virus in the investigated Egyptian governorates in the period from 2017 to 2022. Evenually, the effective control programs are recommended by carrying out further epidemiological investigations to understand the current situation of arboviruses in the country.

Urtica cannabina L. (UL) has been used clinically for centuries because of its anti-inflammatory properties. This study aimed to investigate the underlying mechanisms and anti-inflammatory effects of different UL concentrations in zebrafish. To elucidate UL's anti-inflammatory properties, two inflammation zebrafish models were designed 1) by severing the zebrafish's caudal fin to assess the repairing effect of UL on the tail inflammation, and 2) by inducing lipopolysaccharides (LPS)-mediated intestinal inflammation to assess the protective and reparative effects of UL on intestinal inflammation at the histological and genetic levels. Furthermore, the effect of UL on the LPS-induced intestinal flora changes was also assessed. After caudal fin resection, a scar formed on the tail of the zebrafish, and the area of the caudal fin increased by 1.30 times as much as that of the control group (P < 0.01). Moreover, this tail scar was alleviated after 10 mg/g UL supplementation but not after 30 mg/g UL dose. LPS decreased the feed intake and body weight of the zebrafish; however, these effects were reversed after 10 and 30 mg/g doses of UL. In addition, the LPS treatment also reduced the intestinal goblet cells by 49% in the zebrafish when compared with the control, which was significantly restored after 10 and 30 mg/g UL treatments. At the genetics level, the expression of the pro-inflammatory cytokine genes (TNF-α, IL6, and IL8) showed that 10 and 30 mg/g UL doses could rescue LPS-induced expression. The gut microbiota analysis revealed changes in the abundance of four major bacterial phyla in the 10 and 30 mg/g UL-treated groups, with an increased probiotic Bacteroidota and decreased pathogenic bacteria. These results indicate that UL strongly inhibits inflammation caused by caudal fin removal and LPS-induced inflammatory changes in the zebrafish intensity, suggesting that UL is a feed additive that could be developed to improve resistance to inflammation in livestock.

Lead pollution of the environment poses a major global threat to the ecosystem. Bacterial bioremediation offers a promising alternative to traditional methods for removing these pollutants, that are often hindered by various limitations. Our research focused on isolating lead-resistant bacteria from industrial wastewater generated by heavily lead-containing industries. Eight lead-resistant strains were successfully isolated, and subsequently identified through molecular analysis. Among these, Enterobacter kobei FACU6 emerged as a particularly promising candidate, demonstrating an efficient lead removal rate of 83.4% and a remarkable lead absorption capacity of 571.9 mg/g dry weight. Furthermore, E. kobei FACU6 displayed a remarkable a maximum tolerance concentration (MTC) for lead reaching 3,000 mg/L. To further investigate the morphological changes in E. kobei FACU6 in response to lead exposure, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed. These analyses revealed significant lead adsorption and intracellular accumulation in treated bacteria in contrast to the control bacterium. Whole-genome sequencing was performed to gain deeper insights into E. kobei’s lead resistance mechanisms. Structural annotation revealed a genome size of 4,856,454 bp, with a G + C content of 55.06%. The genome encodes 4,655 coding sequences (CDS), 75 tRNA genes, and 4 rRNA genes. Notably, genes associated with heavy metal resistance and their corresponding regulatory elements were identified within the genome. Furthermore, the expression levels of four specific heavy metal resistance genes were evaluated. Our findings revealed a statistically significant upregulation in gene expression under specific environmental conditions, including pH 7, temperature of 30°C, and high concentrations of heavy metals. The outstanding potential of E. kobei FACU6 as a source of diverse genes related to heavy metal resistance and plant growth promotion makes it a valuable candidate for developing safe and effective strategies for heavy metal disposal.