Search

The Internet of Things (IoT) plays an indispensable role in present-day household electricity management. Nevertheless, practical development of cost-effective intelligent condition monitoring, protection, and control techniques for household distribution systems is still a challenging task. This paper is taking one step forward into a practical implementation of such techniques by developing an IoT Smart Household Distribution Board (ISHDB) to monitor and control various household smart appliances. The main function of the developed ISHDB is collecting and storing voltage, current, and power data and presenting them in a user-friendly way. The performance of the developed system is investigated under various residential electrical loads of different energy consumption profiles. In this regard, an Arduino-based working prototype is employed to gather the collected data into the ThingSpeak cloud through a Wi-Fi medium. Blynk mobile application is also implemented to facilitate real-time monitoring by individual consumers. Microprocessor technology is adopted to automate the process, and reduce hardware size and cost. Experimental results show that the developed system can be used effectively for real-time home energy management. It can also be used to detect any abnormal performance of the electrical appliances in real-time through monitoring their individual current and voltage waveforms. A comparison of the developed system and other existing techniques reveals the superiority of the proposed method in terms of the implementation cost and execution time.

Real-time estimation of transmission line (TL) parameters is essential for proper management of transmission and distribution networks. These parameters can be used to detect incipient faults within the line and hence avoid any potential consequences. While some attempts can be found in the literature to estimate TL parameters, the presented techniques are either complex or impractical. Moreover, none of the presented techniques published in the literature so far can be implemented in real time. This paper presents a cost-effective technique to estimate TL parameters in real time. The proposed technique employs easily accessible voltage and current data measured at both ends of the line. For simplicity, only one quarter of the measured data is sampled and utilized in a developed objective function that is solved using the whale optimization algorithm (WOA) to estimate the TL parameters. The proposed objective function comprises the sum of square errors of the measured data and the corresponding estimated values. The robustness of the proposed technique is tested on a simple two-bus and the IEEE 14-bus systems. The impact of uncertainties in the measured data including magnitude, phase, and communication delay on the performance of the proposed estimation technique is also investigated. Results reveal the effectiveness of the proposed method that can be implemented in real time to detect any incipient variations in the TL parameters due to abnormal or fault events.

Power transformers are located in the electrical transmission and distribution networks where different voltage levels are needed. The turn ratio of the low voltage and high voltage windings is mechanically controlled by an on-load tap changer or de-energized tap changer. As the tap changer is the transformer’s only moving part, it is highly susceptible to mechanical failure and aging degradation. While some diagnostic tools have been used to determine the mechanical condition of tap changer contacts, not much attention was given to use the frequency response analysis to diagnose the transformer’s tap changers’ mechanical integrity. This paper is taking one step forward into maturing the application of the frequency response analysis (FRA) technique to detect transformer tap changer faults. In this regard, two common tap changer faults are created, and experimental testing for four FRA test configurations is conducted. For a better understanding of the tap changer fault mechanism, an electrical equivalent circuit model is proposed and designed using Simulink. The simulation and implementation of the equivalent circuits using MATLAB\R2018a.

Frequency response analysis (FRA) is a method of monitoring a power transformer’s mechanical integrity. However, identifying the type of fault and its severity by comparing measured responses is still challenging and mostly relies on personnel expertise. This paper is taking one step forward to standardize the FRA interpretation process by proposing guidelines based on various international standards and FRA case studies. In this study, the FRA signature is divided into three regions: low-, mid- and high-frequency regions. The deviation from the fingerprint signature for various faults is classified into small, large, and no variations, based on the calculation of the correlation coefficient. The proposed guidelines are developed based on the frequency regions, and the level of variation is represented using a simple arrow method to simplify the interpretation process. A case study is conducted on a three-phase 11/0.433 kV, 500 kVA distribution transformer with a short circuit winding fault to validate the proposed guidelines.

Air-core coil current transformer is a key piece of equipment in the digital substation development. However, it is more vulnerable to various faults when compared with the traditional electromagnetic current transformer. Aiming at understanding the effect of various parameters on the performance of the air-core coil current transformer, this paper investigates the influence of these factors using the maximum information coefficient. The interference mechanism of influencing factors on the transformer error is also analyzed. Finally, the Stacking model fusion algorithm is used to predict transformer errors. The developed base model consists of deep learning, integrated learning and traditional learning algorithms. Compared with gated recurrent units and extreme gradient boosting algorithms, the prediction model based on stacking model fusion algorithm proposed in this paper features higher accuracy and reliability which helps improve the performance and safety of future digital substations.

While frequency response analysis (FRA) is a well matured technique widely used by current industry practice to detect the mechanical integrity of power transformers, interpretation of FRA signatures is still challenging, regardless of the research efforts in this area. This paper presents a method for reliable quantitative and qualitative analysis to the transformer FRA signatures based on a decision tree classification model and a fully connected neural network. Several levels of different six fault types are obtained using a lumped parameter-based transformer model. Results show that the proposed model performs well in the training and the validation stages, and is of good generalization ability.

In a photovoltaic (PV)-battery integrated system, the battery undergoes frequent charging and discharging cycles that reduces its operational life and affects its performance considerably. As such, an intelligent power control approach for a PV-battery standalone system is proposed in this paper to improve the reliability of the battery along its operational life. The proposed control strategy works in two regulatory modes: maximum power point tracking (MPPT) mode and battery management system (BMS) mode. The novel controller tracks and harvests the maximum available power from the solar cells under different atmospheric conditions via MPPT scheme. On the other hand, the state of charge (SOC) estimation technique is developed using backpropagation neural network (BPNN) algorithm under BMS mode to manage the operation of the battery storage during charging, discharging, and islanding approaches to prolong the battery lifetime. A case study is demonstrated to confirm the effectiveness of the proposed scheme which shows only 0.082% error for real-world applications. The study discloses that the projected BMS control strategy satisfies the battery-lifetime objective for off-grid PV-battery hybrid systems by avoiding the over-charging and deep-discharging disturbances significantly.

The electronic voltage transformer (EVT) has received much attention with the recent global trend to establish smart grids and digital substations. One of the main issues of the EVT is the deterioration of its performance with long-term operation which affects the control and protection systems it is employed for and hence the overall reliability of the power grids. This calls for the essential need for a reliable technique to regularly assess the accuracy of operating EVT in real-time. Unfortunately, traditional calibration methods cannot detect the incipient EVT performance change in real-time. As such, this paper presents a new online method to evaluate the accuracy of the EVT. In this regard, the Q-statistic is calculated based on the recursive principal components analysis (RPCA) using the output data of EVT to map up the changes of metering error on the electric–physics relationship. By employing the output data of the EVT along with the power grid characteristics, the performance of the EVT is evaluated without the need for a standard transformer, as per the current industry practice. Results show that the proposed method can assess the EVT with a 0.2 accuracy class.

Charging a group of series-connected batteries of a PV-battery hybrid system exhibits an imbalance issue. Such imbalance has severe consequences on the battery activation function and the maintenance cost of the entire system. Therefore, this paper proposes an active battery balancing technique for a PV-battery integrated system to improve its performance and lifespan. Battery state of charge (SOC) estimation based on the backpropagation neural network (BPNN) technique is utilized to check the charge condition of the storage system. The developed battery management system (BMS) receives the SOC estimation of the individual batteries and issues control signal to the DC/DC Buck-boost converter to balance the charge status of the connected group of batteries. Simulation and experimental results using MATLAB-ATMega2560 interfacing system reveal the effectiveness of the proposed approach.

Effective detection of electricity theft is essential to maintain power system reliability. With the development of smart grids, traditional electricity theft detection technologies have become ineffective to deal with the increasingly complex data on the users’ side. To improve the auditing efficiency of grid enterprises, a new electricity theft detection method based on improved synthetic minority oversampling technique (SMOTE) and improve random forest (RF) method is proposed in this paper. The data of normal and electricity theft users were classified as positive data (PD) and negative data (ND), respectively. In practice, the number of ND was far less than PD, which made the dataset composed of these two types of data become unbalanced. An improved SOMTE based on K-means clustering algorithm (K-SMOTE) was firstly presented to balance the dataset. The cluster center of ND was determined by K-means method. Then, the ND were interpolated by SMOTE on the basis of the cluster center to balance the entire data. Finally, the RF classifier was trained with the balanced dataset, and the optimal number of decision trees in RF was decided according to the convergence of out-of-bag data error (OOB error). Electricity theft behaviors on the user side were detected by the trained RF classifier.

The short-term variability of photovoltaic (PV) system-generated power due to ambient conditions, such as passing clouds, represents a key challenge for network planners and operators. Such variability can be reduced using a geographical smoothing technique based on installing multiple PV systems over certain locations at distances of meters to kilometers. To accurately estimate the PV system’s generated power during cloud events, a variability reduction index (VRI), which is a function of several parameters, should be calculated precisely. In this paper, the Wavelet Transform Technique (WTT) along with Adaptive Neuro Fuzzy Inference System (ANFIS) are used to develop new models to estimate the PV system’s power output during cloud events. In this context, irradiance data collected from one PV system along with other parameters, including ambient conditions, were used to develop the proposed models. Ultimately, the models were validated through their application on a 0.7 km2 PV plant with 16 rooftop PV systems in Brisbane, Australia.