Search

To our knowledge, the potential use of CO2 as a heat-transmitting fluid for cooling applications in power plants has not been explored very extensively. In this paper, we conduct a theoretical analysis to explore the use of CO2 as the heat transmission fluid. We evaluate and compare the thermophysical properties of both dry air and CO2 and perform a simple analysis on a steam-condensing device where steam flows through one of the flow paths and the cooling fluid (CO2 or air) is expanded from a high-pressure container and flows through the other. Sample calculations are carried out for a saturated-vapor steam at 0.008 MPa and 41.5 °C with the mass flow rate of 0.01 kg/s. The pressure of the storage container ranges from 1 to 5 MPa, and its temperature is kept at 35 °C. The pressure of the cooling fluid (CO2 or dry air) is set at 0.1 MPa. With air as the heat-removing fluid, the steam exits the condensing device as a vapor-liquid steam of 53% to 10% vapor for the container pressure of 1 to 5 MPa. With CO2 as the heat-removing fluid, the steam exits the device still containing 44% and 7% vapor for the container pressure of 1 MPa and 2 MPa, respectively. For the container pressure of 3 MPa and higher, the steam exits the device as a single-phase saturated liquid. Thus, due to its excellent Joule–Thomson cooling effect and heat capacity, CO2 is a better fluid for power plant cooling applications. The condensing surface area is also estimated, and the results show that when CO2 is used, the condensing surface is 50% to 60% less than that when dry air is used. This leads to significant reductions in the condenser size and the capital costs. A rough estimate of the amount of CO2 that can be stored and utilized is also carried out for a steam power plant which operates with steam with a temperature of 540 °C (813 K) and a pressure of 10 MPa at the turbine inlet and saturated-vapor steam at 0.008 MPa at the turbine outlet. The results indicate that if CO2 is used as a cooling fluid, CO2 emitted from a 1000 MW power plant during a period of 250 days could be stored and utilized. [ABSTRACT FROM AUTHOR]

Flowing media in both industrial and natural processes are often characterized as assemblages of densely packed granular materials. Typically, the constitutive relations for the stress tensor and heat flux vector are fundamentally nonlinear. Moreover, these equations are coupled through the Clausius-Duhem inequality. However, the consequences of this coupling are rarely studied. Here we address this issue by obtaining constraints imposed by the Clausius-Duhem inequality on the constitutive relations for both the stress tensor and the heat flux vector in which the volume fraction gradient plays an important role. A crucial result of the analysis is the restriction on the dependency of phenomenological coefficients appearing in the constitutive equations on the model objective functions. [ABSTRACT FROM AUTHOR]

The effects of various conditions on the fluid flow, particle migration and heat transfer in non-linear fluids encountered in drilling and geothermal applications are studied. We assume that the drilling fluid is a suspension composed of various substances, behaving as a non-linear complex fluid, where the effects of particle volume fraction, shear rate, and temperature on the viscosity and thermal diffusivity are considered. The motion of the particles is described using a concentration flux equation. Two problems are studied: flow in a vertical pipe and flow between two (eccentric) cylinders where the inner cylinder is rotating. We consider effects of earth temperature, the rotational speed of the inner cylinder, and the bulk volume fraction on the flow and heat transfer. [ABSTRACT FROM AUTHOR]

We present a numerical simulation of blood flow in two aneurysmal vessels. Using a multicomponent continuum approach, called mixture theory, the velocity fields and spatial distribution of the red blood cells (RBCs) and the plasma are predicted. Platelet migration is described by a convection-diffusion equation, coupled to the RBC concentration field. The model is applied to study a two-dimensional straight vessel and multiple two-dimensional aneurysm vessels with different neck sizes. The model accurately predicts the enrichment of the platelets near the wall in the straight vessel, agreeing with the experimental measurement quantitatively. The numerical results also show that the near-wall enrichment of the platelets in the parent vessel highly influences the platelet concentration within the aneurysm. The results also indicate that the platelet concentration within the aneurysm increases with Reynolds number and decreases with a smaller neck size. This might have significance on the formation of thrombus (blood clot) within the aneurysm, which in turn may have a protective effect on preventing ruptures. Based on the success with the problems studied, we believe the current model can be a useful tool for analyzing the blood flow and platelets transport within patient specific aneurysms in the future. [ABSTRACT FROM AUTHOR]

In this paper, we study pulsed flow and heat transfer in water-Al2O3 nanofluids in a Y-type intersection channel with two inlets and one outlet. At the two inlets, two sinusoidal velocities with a phase difference of π are applied. We assume that the shear viscosity and the thermal conductivity of the nanofluids depend on the nanoparticles concentration. The motion of the nanoparticles is modeled by a convention-diffusion equation, where the effects of the Brownian motion, thermophoretic diffusion, etc., are included. The effects of pulse frequency, pulse amplitude and nanoparticles concentration on the heat transfer are explored numerically at various Reynolds numbers. The results show that the application of the pulsed flow improves the heat transfer efficiency (Nusselt number) for most of the cases studied. Amongst the four factors considered, the effect of the frequency seems to be the most important. [ABSTRACT FROM AUTHOR]