Search

Abstract: GLARE© is a fibre-metal laminate that is widely used by the aircraft industry due to its excellent fatigue and impact properties. It has also been proposed as a blast resistant material. This article reports on a set of experiments on GLARE 3, one of the GLARE variants used in impact applications. Results from the preliminary blast tests indicate that the panels behaved similarly to monolithic metal plates and appeared to offer potential for blast resistance when the results are compared to those in the literature for monolithic metal plates. [Copyright &y& Elsevier]

The study detailed in this manuscript focuses on the numerical and experimental testing of circular AA6061-T6 aluminum alloy extrusions subjected to cutting deformation modes under blast loading conditions, as energy dissipation devices. The experimental investigation was completed utilizing a specially designed cutter with the presence of a deflector mounted on a ballistic pendulum. Plastic explosives (PE4) where charge masses varied from 20 g to 40 g were used to initiate blast loads. Experimental results revealed that the cutting deformation mode was repeatable and controllable having a stable and clean curling cut. Numerical simulations of the detonation as well as the axial cutting deformation process employing an Eulerian finite element formulation were performed. Numerical detonation models were in good agreement with experimental results having an average standard error less than 3% for impulse predictions. Good predictive capabilities of the numerical model for the axial cutting behaviour and large scale deformation response were observed. An almost constant force during cutting was observed, which eliminated the initial high peak crush force associated with a dynamic plastic collapse deformation mode. The average mean cutting force, measured at the load cell for both experimental and numerical testing methods as a result of cutting deformation was observed to be 33.5 kN for the specific specimen geometry and material. Finally, a force analysis was conducted using theoretical and numerical models to study the steady-state cutting condition. [ABSTRACT FROM AUTHOR]