Search

We are rapidly reaching a point where, as connected devices for monitoring and treating diabetes and other diseases become more pervasive and powerful, the likelihood of malicious medical device hacking (known as "medjacking") is growing. While government could increase regulation, we have all been witness in recent times to the limitations and issues surrounding exclusive reliance on government. Herein we outline a preliminary framework for establishing security for wireless health devices based on international common criteria. Creation of an independent medical device cybersecurity body is suggested. The goal is to allow for continued growth and innovation while simultaneously fostering security, public trust, and confidence., (© 2015 Diabetes Technology Society.)

Mechanical assessment of soft biological tissues and organs has broad relevance in clinical diagnosis and treatment of disease. Existing characterization methods are invasive, lack microscale spatial resolution, and are tailored only for specific regions of the body under quasi-static conditions. Here, we develop conformal and piezoelectric devices that enable in vivo measurements of soft tissue viscoelasticity in the near-surface regions of the epidermis. These systems achieve conformal contact with the underlying complex topography and texture of the targeted skin, as well as other organ surfaces, under both quasi-static and dynamic conditions. Experimental and theoretical characterization of the responses of piezoelectric actuator-sensor pairs laminated on a variety of soft biological tissues and organ systems in animal models provide information on the operation of the devices. Studies on human subjects establish the clinical significance of these devices for rapid and non-invasive characterization of skin mechanical properties.

The SynCardia total artificial heart (TAH) has emerged as an effective, life-saving biventricular replacement system for a wide variety of patients with end-stage heart failure. Although the clinical performance of the TAH is established, modern physiological characterization, in terms of elastance behavior and pressure-volume (PV) characterization has not been defined. Herein, we examine the TAH in terms of elastance using a nonejecting left ventricle, and then characterize the PV relation of the TAH by varying preload and afterload parameters using a Donovan Mock Circulatory System. We demonstrate that the TAH does not operate with time-varying elastance, differing from the human heart. Furthermore, we show that the TAH has a PV relation behavior that also differs from that of the human heart. The TAH does exhibit Starling-like behavior, with output increasing via preload-dependent mechanisms, without reliance on an alteration of inotropic state within the operating window of the TAH. Within our testing range, the TAH is insensitive to variations in afterload; however, this insensitivity has a limit, the limit being the maximum driving pressure of the pneumatic driver. Understanding the physiology of the TAH affords insight into the functional parameters that govern artificial heart behavior providing perspective on differences compared with the human heart.

In this study, we evaluate coaxial electrospun nanofibers with gelatin in the shell and poly(vinyl alcohol) (PVA) in the core as a potential vascular material by determining fiber surface roughness, as well as human platelet deposition and activation under varying conditions. PVA scaffolds had the highest surface roughness (Ra=65.5±6.8 nm) but the lowest platelet deposition (34.2±5.8 platelets) in comparison to gelatin nanofibers (Ra=36.8±3.0 nm and 168.9±29.8 platelets) and coaxial nanofibers (1 Gel:1 PVA coaxial, Ra=24.0±1.5 nm and 150.2±17.4 platelets. 3 Gel:1 PVA coaxial, Ra=37.1±2.8 nm and 167.8±15.4 platelets). Therefore, the chemical structure of the gelatin nanofibers dominated surface roughness in platelet deposition. Due to their increased stiffness, the coaxial nanofibers had the highest platelet activation rate, rate of thrombin formation, in comparison to gelatin and PVA fibers. Our studies indicate that mechanical stiffness is a dominating factor for platelet deposition and activation, followed by biochemical signals, and lastly surface roughness. Overall, these coaxial nanofibers are an appealing material for vascular applications by supporting cellular growth while minimizing platelet deposition and activation.

Cells process various mechanical cues in the microenvironment to self-organize into high-order architectures during tissue morphogenesis. Impairment of morphogenic processes is the underlying cause of many diseases; as such, understanding the regulatory mechanisms associated with these processes will form the foundation for the development of innovative approaches in cell therapy and tissue engineering. Nevertheless, little is known about how cells collectively respond to mechanical cues in the microenvironment, such as global geometric guidance, local cell-cell interactions, and other physicochemical factors, for the emergence of the structural hierarchy across multiple length scales. To elucidate the mechanoregulation of tissue morphogenesis, numerous approaches based on biochemical, biomaterial, and biophysical techniques have been developed in the past decades. In this review, we summarize techniques and approaches for probing the mechanoregulation of tissue morphogenesis and illustrate their applications in vasculature development. The potential and limitations of these methods are also discussed with a view toward the investigation of a wide spectrum of tissue morphogenic processes., (© 2014 Society for Laboratory Automation and Screening.)

We developed a phenomenological three-dimensional platelet model to characterize the filopodia formation observed during early stage platelet activation. Departing from continuum mechanics based approaches, this coarse-grained molecular dynamics (CGMD) particle-based model can deform to emulate the complex shape change and filopodia formation that platelets undergo during activation. The platelet peripheral zone is modeled with a two-layer homogeneous elastic structure represented by spring-connected particles. The structural zone is represented by a cytoskeletal assembly comprising of a filamentous core and filament bundles supporting the platelet's discoid shape, also modeled by spring-connected particles. The interior organelle zone is modeled by homogeneous cytoplasm particles that facilitate the platelet deformation. Nonbonded interactions among the discrete particles of the membrane, the cytoskeletal assembly, and the cytoplasm are described using the Lennard-Jones potential with empirical constants. By exploring the parameter space of this CGMD model, we have successfully simulated the dynamics of varied filopodia formations. Comparative analyses of length and thickness of filopodia show that our numerical simulations are in agreement with experimental measurements of flow-induced activated platelets. Copyright © 2015 John Wiley & Sons, Ltd., (Copyright © 2015 John Wiley & Sons, Ltd.)

Calcific aortic valve disease (CAVD) is a cardiovascular condition that causes the progressive narrowing of the aortic valve (AV) opening, due to the growth of bone-like deposits all over the aortic root (AR). Transcatheter aortic valve replacement (TAVR), a minimally invasive procedure, has recently become the only lifesaving solution for patients that cannot tolerate the standard surgical valve replacement. However, adverse effects, such as AR injury or paravalvular leakage (PVL), may occur as a consequence of a sub-optimal procedure, due to the presence of calcifications in situ. Additionally, the crimping required for delivering the valve via stenting may damage the valve. The aim of the present study is to comparatively assess the crimping mechanics of the commercialized Edwards SAPIEN valve and an alternative polymeric valve (Polynova, Inc) and to evaluate the effect of different TAVR deployment positions using patient-specific numerical models. The optimal deployment location for achieving better patient outcomes was calculated and based on the interactions between the TAVR stent and the native AR. Results demonstrated that the Polynova valve withstands the crimping process better than the SAPIEN valve. Furthermore, deployment simulations showed the role that calcifications deposits may play in the TAVR sub-optimal valve anchoring to the AV wall, leading to the presence of gaps that result in PVL.

Mechanical circulatory support (MCS) devices, such as ventricular assist devices and the total artificial heart, have emerged as a vital therapy for advanced and end-stage heart failure. However, MCS patients face life-long antiplatelet and anticoagulant therapy to minimize thrombotic complications resulting from the dynamic and supraphysiologic device-associated shear stress conditions, whose effect on platelet activation is poorly understood. We repeatedly exposed platelets to average shear stresses up to 1000 dyne/cm(2) for as short as 25 ms in the "platelet hammer," a syringe-capillary viscometer. Platelet activation state was measured using a modified prothrombinase assay and morphological changes analyzed using scanning electron microscopy. An increase in stress accumulation (SA), the product of shear stress and exposure time, led to an increase in the platelet activation state and post-high shear platelet activation rate, or sensitization. A significant increase in platelet activation state was observed beyond an SA of 1500 dyne-s/cm(2), with a marked increase in pseudopod length visible beyond an SA of 1000 dyne-s/cm(2). The platelet hammer may be used to study other shear-dependent pathologies and may ultimately enhance the safety and effectiveness of MCS devices and objective antithrombotic pharmacotherapy management.

Background: Frailty is a geriatric syndrome that leads to impairment in interrelated physiological systems and progressive homeostatic dysregulation in physiological systems., Objective: The focus of the present systematic review was to study the association between the activity of the cardiac autonomic nervous system (ANS) and frailty., Methods: A systematic literature search was conducted in multiple databases: PubMed/MEDLINE, Embase, Cochrane Library, Web of Science, CINAHL, and ClinicalTrials.gov; the last search was performed in March 2015. Inclusion criteria were: (1) that the studied population was classified for frailty according to a standard definition, such as Fried's criteria; (2) that the study had a nonfrail control group, and (3) that heart rate (HR) and/or heart rate variability (HRV) were parameters of interest in the study., Results: Of the 1,544 articles screened, 54 were selected for full-text review and 6 studies met the inclusion criteria. Assessment of HRV using different standard time domain, frequency domain, and nonlinear domain approaches confirmed the presence of an impaired cardiac ANS function in frail compared to nonfrail participants. Furthermore, HR changes while performing a clinical test (e.g., the seated step test or the lying-to-standing orthostatic test) were decreased in the frail group compared to the nonfrail group., Conclusions: The current systematic review provides evidence that the cardiac ANS is impaired in frail compared to nonfrail older adults, as indicated by a reduction in the complexity of HR dynamics, reduced HRV, and reduced HR changes in response to daily activities. Four out of 6 included articles recruited only female participants, and in the other 2 articles the effect of gender on impairment of cardiac ANS was insufficiently investigated. Therefore, further studies are required to study the association between cardiac ANS impairments and frailty in males. Furthermore, HRV was studied only during static postures such as sitting, or without considering the level of activity as a potential confounder. Accordingly, simultaneous measurement of both physiological (i.e., HRV) and kinematic (e.g., using wearable sensor technology) information may provide a better understanding of cardiac ANS impairments with frailty while controlling for activity., (© 2015 S. Karger AG, Basel.)

We developed a multiscale particle-based model of platelets, to study the transport dynamics of shear stresses between the surrounding fluid and the platelet membrane. This model facilitates a more accurate prediction of the activation potential of platelets by viscous shear stresses - one of the major mechanisms leading to thrombus formation in cardiovascular diseases and in prosthetic cardiovascular devices. The interface of the model couples coarse-grained molecular dynamics (CGMD) with dissipative particle dynamics (DPD). The CGMD handles individual platelets while the DPD models the macroscopic transport of blood plasma in vessels. A hybrid force field is formulated for establishing a functional interface between the platelet membrane and the surrounding fluid, in which the microstructural changes of platelets may respond to the extracellular viscous shear stresses transferred to them. The interaction between the two systems preserves dynamic properties of the flowing platelets, such as the flipping motion. Using this multiscale particle-based approach, we have further studied the effects of the platelet elastic modulus by comparing the action of the flow-induced shear stresses on rigid and deformable platelet models. The results indicate that neglecting the platelet deformability may overestimate the stress on the platelet membrane, which in turn may lead to erroneous predictions of the platelet activation under viscous shear flow conditions. This particle-based fluid-structure interaction multiscale model offers for the first time a computationally feasible approach for simulating deformable platelets interacting with viscous blood flow, aimed at predicting flow induced platelet activation by using a highly resolved mapping of the stress distribution on the platelet membrane under dynamic flow conditions.

The SynCardia total artificial heart (TAH) is the only Food and Drug Administration (FDA) approved device for replacing hearts in patients with congestive heart failure. It pumps blood via pneumatically driven diaphragms and controls the flow with mechanical valves. While it has been successfully implanted in more than 1300 patients, its size precludes implantation in smaller patients. This study's aim was to evaluate the viability of scaled-down TAHs by quantifying thrombogenic potentials from flow patterns. Simulations of systole were first conducted with stationary valves, followed by an advanced full-cardiac cycle model with moving valves. All the models included deforming diaphragms and platelet suspension in the blood flow. Flow stress accumulations were computed for the platelet trajectories and thrombogenic potentials were assessed. The simulations successfully captured complex flow patterns during various phases of the cardiac cycle. Increased stress accumulations, but within the safety margin of acceptable thrombogenicity, were found in smaller TAHs, indicating that they are clinically viable.

Left ventricular assist devices are increasingly important in the management of advanced heart failure. Most patients who benefit from these devices have had some prior cardiac surgery, making implantation of higher risk. This is especially true in patients who have had prior pectoralis flap reconstruction after sternectomy for mediastinitis. We outline the course of such a patient, in whom the use of robotic assistance allowed for a less invasive device implantation approach with preservation of the flap for transplantation.

Ventricular assist devices (VADs) are implanted in patients with end-stage heart failure to provide both short- and long-term hemodynamic support. Unfortunately, bleeding and thromboembolic complications due to the severely disturbed, dynamic flow conditions generated within these devices require complex, long-term antiplatelet and anticoagulant therapy. While several studies have examined the effectiveness of one such agent, aspirin, under flow conditions, data comparing the efficacy of in vitro and in vivo metabolized aspirin is lacking. Two sets of studies were conducted in vitro with purified human platelets circulating for 30 min in a flow loop containing the DeBakey VAD (MicroMed Cardiovascular, Houston, TX, USA): (a) 20 μM aspirin was added exogenously in vitro to platelets isolated from aspirin-free subjects, and (b) platelets were obtained from donors 2 h (n = 14) and 20 h (n = 13) after ingestion of 1,000 mg aspirin. Near real-time platelet activation state (PAS) was measured with a modified prothrombinase-based assay. Platelets exposed to aspirin in vitro and in vivo (metabolized) showed 28.2 and 25.3 % reduction in platelet activation rate, respectively, compared to untreated controls. Our results demonstrate that in vitro treatment with antiplatelet drugs such as aspirin is as effective as in vivo metabolized aspirin in testing the effect of reducing shear-induced platelet activation in the VAD. Using the PAS assay provides a practical in vitro alternative to in vivo testing of antiplatelet efficacy, as well as for testing the thrombogenic performance of devices during their research and development.

Coaxial electrospinning is used to fabricate nanofibers with gelatin in the shell and polyvinyl alcohol (PVA) in the core in order to derive mechanical strength from PVA and bioactivity from gelatin. At a 1:1 PVA/gelatin mass ratio, the core-shell nanofiber scaffolds display a Young's modulus of 168.6 ± 36.5 MPa and a tensile strength of 5.42 ± 1.95 MPa, which are significantly higher than those of the scaffolds composed solely of gelatin or PVA. The Young's modulus and tensile strength of the core-shell nanofibers are further improved by reducing the PVA/gelatin mass ratio from 1:1 to 1:3. The mechanical analysis of the core-shell nanofibers suggests that the presence of the gelatin shell may improve the molecular alignment of the PVA core, transforming the semi-crystalline, plastic PVA into a more crystallized, elastic PVA, and enhancing the mechanical properties of the core. Lastly, the PVA/gelatin core-shell nanofibers possess cellular viability, proliferation, and adhesion similar to these of the gelatin nanofibers, and show significantly higher proliferation and adhesion than the PVA nanofibers. Taken together, the coaxial electrospinning of nanofibers with a core-shell structure permits integration of the bioactivity of gelatin and the mechanical strength of PVA in single fibers., (Copyright © 2013 Wiley Periodicals, Inc.)

To enhance ambulation and facilitate hospital discharge of total artificial heart (TAH)-supported patients, we adapted a mobile ventricular assistance device (VAD) driver (Excor) for TAH use and report on the performance of Excor-driven TAH patients discharged home. Ten patients stabilized on a TAH, driven by the CSS ("Circulatory Support System"), were progressively switched over to the Excor in hospital over 14 days as a pilot, with daily hemodynamics and laboratory parameters measured. Twenty-two stable TAH patients were subsequently placed on the Excor, trained, and discharged home. Clinical and hemodynamic parameters were followed. All pilot study patients were clinically stable on the Excor, with no decrease in TAH output noted (6.3 + 0.3 L/min [day 1] vs. 5.8 + 0.2 L/min [day 14], p = 0.174), with a trend suggesting improvement of both hepatic and renal function. Twenty-two TAH patients were subsequently successfully discharged home on the portable driver and were supported out of hospital for up to 598 days (range, 2-598; mean = 179 ± 140 days), remaining ambulatory, New York Heart Association (NYHA) class I or II, and free of readmission for 88.5% of the time of support. TAH patients may be effectively and safely supported by a mobile drive system. As such, the utility of the TAH may be extended to support patients beyond the hospital, at home, with overall ambulatory freedom.

Postimplant device thrombosis remains a life-threatening complication and limitation of continuous-flow ventricular assist devices (VADs). Using advanced computational fluid dynamic (CFD) simulations, we successfully depicted various flow patterns, recirculation zones, and stagnant platelet trajectories which promote thrombus formation and observed that they matched actual thrombus formation patterns observed in Thoratec HeartMate II VADs explanted from patients with pump thrombosis. Previously, these small eddies could not be captured by either digital particle image velocimetry or CFD due to insufficient resolution. Our study successfully demonstrated the potential capability of advanced CFD to be adopted for device optimization, leading to enhanced safety and efficacy of VADs for long-term destination therapy.

Here, we report advanced materials and devices that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales. A cointegrated collection of such energy-harvesting elements with rectifiers and microbatteries provides an entire flexible system, capable of viable integration with the beating heart via medical sutures and operation with efficiencies of ∼2%. Additional experiments, computational models, and results in multilayer configurations capture the key behaviors, illuminate essential design aspects, and offer sufficient power outputs for operation of pacemakers, with or without battery assist.

Collective cell behavior in response to mechanical injury is central to various regenerative and pathological processes. Using a double-stranded locked nucleic acid probe for monitoring real-time intracellular gene expression, we examined the spatiotemporal response of epithelial cells during injury-induced collective migration and compared to the blocker assay with minimal injury as control. We showed that cells ∼150 μm from the wound edge exhibit a gradient in response to mechanical injury, expressing different genes depending on the wounding process. While release of contact inhibition is sufficient to trigger the migratory behavior, cell injury additionally induces reactive oxygen species, Nrf2 protein, and stress response genes, including heat shock protein 70 and heme oxygenase-1, in a spatiotemporal manner. Furthermore, we show that Nrf2 has an inhibitory role in injury-induced epithelial-mesenchymal transition, suggesting a potential autoregulatory mechanism in injury-induced response. Taken together, our single-cell gene expression analyses reveal modular cell responses to mechanical injury, manipulation of which may afford novel strategies for tissue repair and prevention of tumor invasion in the future.

The total artificial heart (TAH) is a bi-ventricular mechanical circulatory support device that replaces the heart in patients with end-stage congestive heart failure. The device acts as blood pump via pneumatic activation of diaphragms altering the volume of the ventricular chambers. Flow in and out of the ventricles is controlled by mechanical heart valves. The aim of this study is to evaluate the flow regime in the TAH and to estimate the thrombogenic potential during systole. Toward that goal, three numerical models of TAHs of differing sizes, that include the deforming diaphragm and the blood flow from the left chamber to the aorta, are introduced. A multiphase model with injection of platelet particles is employed to calculate their trajectories. The shear stress accumulation in the three models are calculated along the platelets trajectories and their probability density functions, which represent the `thrombogenic footprint' of the device are compared. The calculated flow regime successfully captures the mitral regurgitation and the flows that open and close the aortic valve during systole. Physiological velocity magnitudes are found in all three models, with higher velocities and increased stress accumulation predicted for smaller devices.

The pharmacologic management of patients with high-risk coronary artery disease consists of aspirin and a P2Y12 receptor inhibitor. Chronic oral anticoagulation with warfarin is the major treatment strategy to attenuate thromboembolism or stroke in patients with deep vein thrombosis, pulmonary embolism, heart failure and atrial fibrillation. A substantial percentage of the latter group of patients have coronary artery disease and may require stenting with long-term dual antiplatelet therapy in addition to therapy with warfarin to reduce arterial ischemic events in addition to stroke. These new oral anticoagulants have been developed for long-term therapy to overcome the limitations of warfarin. Dabigatran is a direct thrombin inhibitor and its role in patients with acute coronary syndrome is being explored.

Assuring cell adhesion to an underlying biomaterial surface is vital in implant device design and tissue engineering, particularly under circumstances where cells are subjected to potential detachment from overriding fluid flow. Cell-substrate adhesion is a highly regulated process involving the interplay of mechanical properties, surface topographic features, electrostatic charge, and biochemical mechanisms. At the nanoscale level, the physical properties of the underlying substrate are of particular importance in cell adhesion. Conventionally, natural, pro-adhesive, and often thrombogenic, protein biomaterials are frequently utilized to facilitate adhesion. In the present study, nanofabrication techniques are utilized to enhance the biological functionality of a synthetic polymer surface, polymethymethacrylate, with respect to cell adhesion. Specifically we examine the effect on cell adhesion of combining: 1. optimized surface texturing, 2. electrostatic charge and 3. cell adhesive ligands, uniquely assembled on the substrata surface, as an ensemble of nanoparticles trapped in nanowells. Our results reveal that the ensemble strategy leads to enhanced, more than simply additive, endothelial cell adhesion under both static and flow conditions. This strategy may be of particular utility for enhancing flow-resistant endothelialization of blood-contacting surfaces of cardiovascular devices subjected to flow-mediated shear., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The advent of implantable blood-recirculating devices such as left ventricular assist devices and prosthetic heart valves provides a viable therapy for patients with end-stage heart failure and valvular disease. However, device-generated pathological flow patterns result in thromboembolic complications that require complex and lifelong anticoagulant therapy, which entails hemorrhagic risks and is not appropriate for certain patients. Optimizing the thrombogenic performance of such devices utilizing numerical simulations requires the development of predictive platelet activation models that account for variations in shear-loading rates characterizing blood flow through such devices. Platelets were exposed in vitro to both dynamic and constant shear stress conditions emulating those found in blood-recirculating devices in order to determine their shear-induced activation and sensitization response. Both these behaviors were found to be dependent on the shear loading rates, in addition to shear stress magnitude and exposure time. We then critically examined several current models and evaluated their predictive capabilities using these results. Shear loading rate terms were then included to account for dynamic aspects that are either ignored or partially considered by these models, and model parameters were optimized. Independent optimization for each of the two types of shear stress exposure conditions tested resulted in different sets of best-fit constants, indicating that universal optimization may not be possible. Inherent limitations of the current models require a paradigm shift from these integral-based discretized power law models to better address the dynamic conditions encountered in blood-recirculating devices.

Aortic stenosis is the most prevalent and life-threatening form of valvular heart disease. It is primarily treated via open-heart surgical valve replacement with either a tissue or a mechanical prosthetic heart valve (PHV), each prone to degradation and thrombosis, respectively. Polymeric PHVs may be optimized to eliminate these complications, and they may be more suitable for the new transcatheter aortic valve replacement procedure and in devices like the total artificial heart. However, the development of polymer PHVs has been hampered by persistent in vivo calcification, degradation, and thrombosis. To address these issues, we have developed a novel surgically implantable polymer PHV composed of a new thermoset polyolefin called cross-linked poly(styrene-block-isobutylene-block-styrene), or xSIBS, in which key parameters were optimized for superior functionality via our device thrombogenicity emulation methodology. In this parametric study, we compared our homogeneous optimized polcymer PHV to a prior composite polymer PHV and to a benchmark tissue valve. Our results show significantly improved hemodynamics and reduced thrombogenicity in the optimized polymer PHV compared to the other valves. These results indicate that our new design may not require anticoagulants and may be more durable than its predecessor, and validate the improvement, toward optimization, of this novel polymeric PHV design.

Endothelialization of therapeutic cardiovascular implants is essential for their intravascular hemocompatibility. We previously described a novel nanowell-RGD-nanoparticle ensemble, which when applied to surfaces led to enhanced endothelialization and retention under static conditions and low flow rates. In the present study we extend our work to determine the interrelated effects of flow rate and the orientation of ensemble-decorated surface arrays on the growth, adhesion and morphology of endothelial cells. Human umbilical vascular endothelial cells (HUVECs) were grown on array surfaces with either 1 μm × 5 μm spacing ("parallel to flow") and 5 μm × 1 μm spacing ("perpendicular to flow") and were exposed to a range of shear stress of (0 to 4.7 ± 0.2 dyn·cm-2 ), utilizing a pulsatile flow chamber. Under physiological flow (4.7 ± 0.2 dyn·cm-2), RGD-nanoparticle-nanowell array patterning significantly enhanced cell adhesion and spreading compared with control surfaces and with static conditions. Furthermore, improved adhesion coincided with higher alignment to surface patterning, intimating the importance of interaction and response to the array surface as a means of resisting flow detachment. Under sub-physiological condition (1.7 ± 0.3 dyn·cm-2; corresponding to early angiogenesis), nanowell-nanoparticle patterning did not provide enhanced cell growth and adhesion compared with control surfaces. However, it revealed increased alignment along the direction of flow, rather than the direction of the pattern, thus potentially indicating a threshold for cell guidance and related retention. These results could provide a cue for controlling cell growth and alignment under varying physiological conditions.

Micrometer and nanometer grooved surfaces have been determined to influence cellular orientation, morphology, and migration through contact guidance. Cells typically elongate along the direction of an underlying groove and often migrate with guidance provided by constraints of the pattern. This phenomenon has been studied primarily using linear grooves, post, or well patterns. We investigated the behavior of mouse embryonic fibroblasts on non-linear, sinusoidal wave grooves created via electron beam lithography on a polymethyl methacrylate (PMMA) substrate that was spin-coated onto a positively charged glass surface. Three different wave patterns, with varying wavelengths and amplitudes, and two different line patterns were created. Cell orientation and adhesion was examined after 4, 24, and 48 h after cell seeding. Attachment strength was studied via subjecting cells on substrates to centrifugal force following a 24-h incubation period. For all wave patterns studied, it was noted that cells did not reside within the groove, rather they were observed to cross over each groove, residing both inside and outside of each wave pattern, aligning linearly along the long axis of the pattern. For the linear patterns, we observed that cells tended to reside within the grooves, consistent with previous observations. The ability to add texture to a surface to manipulate cell adhesion strength and growth with only localized attachment, maintaining free space in curvilinear microtopography underlying the cell, may be a useful addition for tissue engineering and the fabrication of novel biomedical devices., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Calcific aortic valve disease is the most common and life threatening form of valvular heart disease, characterized by stenosis and regurgitation, which is currently treated at the symptomatic end-stages via open-heart surgical replacement of the diseased valve with, typically, either a xenograft tissue valve or a pyrolytic carbon mechanical heart valve. These options offer the clinician a choice between structural valve deterioration and chronic anticoagulant therapy, respectively, effectively replacing one disease with another. Polymeric prosthetic heart valves (PHV) offer the promise of reducing or eliminating these complications, and they may be better suited for the new transcatheter aortic valve replacement (TAVR) procedure, which currently utilizes tissue valves. New evidence indicates that the latter may incur damage during implantation. Polymer PHVs may also be incorporated into pulsatile circulatory support devices such as total artificial heart and ventricular assist devices that currently employ mechanical PHVs. Development of polymer PHVs, however, has been slow due to the lack of sufficiently durable and biocompatible polymers. We have designed a new trileaflet polymer PHV for surgical implantation employing a novel polymer-xSIBS-that offers superior bio-stability and durability. The design of this polymer PHV was optimized for reduced stresses, improved hemodynamic performance, and reduced thrombogenicity using our device thrombogenicity emulation (DTE) methodology, the results of which have been published separately. Here we present our new design, prototype fabrication methods, hydrodynamics performance testing, and platelet activation measurements performed in the optimized valve prototype and compare it to the performance of a gold standard tissue valve. The hydrodynamic performance of the two valves was comparable in all measures, with a certain advantage to our valve during regurgitation. There was no significant difference between the platelet activation rates of our polymer valve and the tissue valve, indicating that similar to the latter, its recipients may not require anticoagulation. This work proves the feasibility of our optimized polymer PHV design and brings polymeric valves closer to clinical viability.

Thrombotic complications with mechanical circulatory support (MCS) devices remain a critical limitation to their long-term use. Device-induced shear forces may enhance the thrombotic potential of MCS devices through chronic activation of platelets, with a known dose-time response of the platelets to the accumulated stress experienced while flowing through the device-mandating complex, lifelong anticoagulation therapy. To enhance the thromboresistance of these devices for facilitating their long-term use, a universal predictive methodology entitled device thrombogenicity emulation (DTE) was developed. DTE is aimed at optimizing the thromboresistance of any MCS device. It is designed to test device-mediated thrombogenicity, coupled with virtual design modifications, in an iterative approach. This disruptive technology combines in silico numerical simulations with in vitro measurements, by correlating device hemodynamics with platelet activity coagulation markers-before and after iterative design modifications aimed at achieving optimized thrombogenic performance. The design changes are first tested in the numerical domain, and the resultant device conditions are then emulated in a hemodynamic shearing device (HSD) in which platelet activity is measured under device emulated conditions. As such, DTE can be easily incorporated during the device research and development phase-achieving minimization of the device thrombogenicity before prototypes are built and tested thereby reducing the ultimate cost of preclinical and clinical trials. The robust capability of this predictive technology is demonstrated here in various MCS devices. The presented examples indicate the potential of DTE for reducing device thrombogenicity to a level that may obviate or significantly reduce the extent of anticoagulation currently mandated for patients implanted with MCS devices for safe long-term clinical use., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The SynCardia(™) total artificial heart (TAH) is the only FDA-approved TAH in the world. The SynCardia(™) TAH is a pneumatically driven, pulsatile system capable of flows of >9L/min. The TAH is indicated for use as a bridge to transplantation (BTT) in patients at imminent risk of death from non-reversible bi-ventricular failure. In the Pivotal US approval trial the TAH achieved a BTT rate of >79%. Recently a multi-center, post-market approval study similarly demonstrated a comparable BTT rate. A major milestone was recently achieved for the TAH, with over 1100 TAHs having been implanted to date, with the bulk of implantation occurring at an ever increasing rate in the past few years. The TAH is most commonly utilized to save the lives of patients dying from end-stage bi-ventricular heart failure associated with ischemic or non-ischemic dilated cardiomyopathy. Beyond progressive chronic heart failure, the TAH has demonstrated great efficacy in supporting patients with acute irreversible heart failure associated with massive acute myocardial infarction. In recent years several diverse clinical scenarios have also proven to be well served by the TAH including severe heart failure associated with advanced congenital heart disease. failed or burned-out transplants, infiltrative and restrictive cardiomyopathies and failed ventricular assist devices. Looking to the future a major unmet need remains in providing total heart support for children and small adults. As such, the present TAH design must be scaled to fit the smaller patient, while providing equivalent, if not superior flow characteristics, shear profiles and overall device thrombogenicity. To aid in the development of a new "pediatric," TAH an engineering methodology known as "Device Thrombogenicity Emulation (DTE)", that we have recently developed and described, is being employed. Recently, to further our engineering understanding of the TAH, as steps towards next generation designs we have: (1) assessed of the degree of platelet reactivity induced by the present clinical 70 cc TAH using a closed loop platelet activity state assay, (2) modeled the motion of the TAH pulsatile mobile diaphragm, and (3) performed fluid-structure interactions and assessment of the flow behavior through inflow and outflow regions of the TAH fitted with modern bi-leaflet heart valves. Developing a range of TAH devices will afford biventricular replacement therapy to a wide range of patients, for both short and long-term therapy., (Copyright © 2013. Published by Elsevier Ltd.)

Curved surfaces, complex geometries, and time-dynamic deformations of the heart create challenges in establishing intimate, nonconstraining interfaces between cardiac structures and medical devices or surgical tools, particularly over large areas. We constructed large area designs for diagnostic and therapeutic stretchable sensor and actuator webs that conformally wrap the epicardium, establishing robust contact without sutures, mechanical fixtures, tapes, or surgical adhesives. These multifunctional web devices exploit open, mesh layouts and mount on thin, bio-resorbable sheets of silk to facilitate handling in a way that yields, after dissolution, exceptionally low mechanical moduli and thicknesses. In vivo studies in rabbit and pig animal models demonstrate the effectiveness of these device webs for measuring and spatially mapping temperature, electrophysiological signals, strain, and physical contact in sheet and balloon-based systems that also have the potential to deliver energy to perform localized tissue ablation.

Present prosthetic heart valves, while hemodynamically effective, remain limited by progressive structural deterioration of tissue valves or the burden of chronic anticoagulation for mechanical valves. An idealized valve prosthesis would eliminate these limitations. Polymeric heart valves (PHVs), fabricated from advanced polymeric materials, offer the potential of durability and hemocompatibility. Unfortunately, the clinical realization of PHVs to date has been hampered by findings of in vivo calcification, degradation and thrombosis. Here, the authors review the evolution of PHVs, evaluate the state of the art of this technology and propose a pathway towards clinical reality. In particular, the authors discuss the development of a novel aortic PHV that may be deployed via transcatheter implantation, as well as its optimization via device thrombogenicity emulation.

A remarkable feature of modern silicon electronics is its ability to remain physically invariant, almost indefinitely for practical purposes. Although this characteristic is a hallmark of applications of integrated circuits that exist today, there might be opportunities for systems that offer the opposite behavior, such as implantable devices that function for medically useful time frames but then completely disappear via resorption by the body. We report a set of materials, manufacturing schemes, device components, and theoretical design tools for a silicon-based complementary metal oxide semiconductor (CMOS) technology that has this type of transient behavior, together with integrated sensors, actuators, power supply systems, and wireless control strategies. An implantable transient device that acts as a programmable nonantibiotic bacteriocide provides a system-level example.

Mechanical circulatory support (MCS) devices provide both short and long term hemodynamic support for advanced heart failure patients. Unfortunately these devices remain plagued by thromboembolic complications associated with chronic platelet activation--mandating complex, lifelong anticoagulation therapy. To address the unmet need for enhancing the thromboresistance of these devices to extend their long term use, we developed a universal predictive methodology entitled Device Thrombogenicity Emulation (DTE) that facilitates optimizing the thrombogenic performance of any MCS device--ideally to a level that may obviate the need for mandatory anticoagulation. DTE combines in silico numerical simulations with in vitro measurements by correlating device hemodynamics with platelet activity coagulation markers--before and after iterative design modifications aimed at achieving optimized thrombogenic performance. DTE proof-of-concept is demonstrated by comparing two rotary Left Ventricular Assist Devices (LVADs) (DeBakey vs HeartAssist 5, Micromed Houston, TX), the latter a version of the former following optimization of geometrical features implicated in device thrombogenicity. Cumulative stresses that may drive platelets beyond their activation threshold were calculated along multiple flow trajectories and collapsed into probability density functions (PDFs) representing the device 'thrombogenic footprint', indicating significantly reduced thrombogenicity for the optimized design. Platelet activity measurements performed in the actual pump prototypes operating under clinical conditions in circulation flow loops--before and after the optimization with the DTE methodology, show an order of magnitude lower platelet activity rate for the optimized device. The robust capability of this predictive technology--demonstrated here for attaining safe and cost-effective pre-clinical MCS thrombo-optimization--indicates its potential for reducing device thrombogenicity to a level that may significantly limit the extent of concomitant antithrombotic pharmacotherapy needed for safe clinical device use.

Obesity is a growing epidemic in the United States (US). Obesity has been recognized as a modifiable risk factor for many diverse diseases including diabetes, cardiovascular disease and cancer burden. Common contributors to obesity include a high fat diet, smoking and physical inactivity. Systemic effects of obesity include increased micro-inflammatory molecules such as nuclear factor kappa B (NF-κB) that influence the both endothelial and epithelial layers as well as the supportive stroma. An emerging risk factor for micro-inflammation also includes periodontal disease. These pro-inflammatory states are hypothesized to contribute to diabetes as well as cardiovascular disease and cancer through the direct activation of NF-κB. Therefore, a comprehensive health care strategy would include reduction of diabetes, cardiovascular and cancer risk through the decrease in micro-inflammation., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Periodontitis, one of the most common chronic inflammatory diseases afflicting man, is increasingly being recognized as a risk factor for atherosclerotic cardiovascular disease (ASCVD). Non-antimicrobial tetracyclines are known to have inhibitory effects on inflammatory mediators and effector molecules, including cytokines and matrix metalloproteinases (MMPs), associated with both diseases. In this paper, we discuss the evidence that doxycycline and related non-antibiotic chemically modified tetracyclines (e.g., CMT-3) can effectively reduce cytokine (TNF-α, IL-6, and MCP-1) production by human mononuclear inflammatory cells when stimulated either by endotoxin (LPS) or by a complex of C-reactive protein/oxidized LDL cholesterol relevant to the pathogenesis of periodontal disease and ASCVD, respectively. This inhibition by tetracycline compounds appears to be mediated at least in part by a suppression of the phosphorylation/activation of the NFκB cell signaling pathway. We are currently conducting clinical trials on patients who exhibit both diseases, and our preliminary data suggest that virtually all acute coronary syndrome (ACS) patients exhibit moderate-to-severe periodontitis, a higher incidence of this oral inflammatory disease than that seen in the population at large. In other studies, a non-antimicrobial formulation of doxycycline (SDD) has been found to dramatically reduce hsCRP, IL-6 and MMP-9 levels in plasma of ACS patients, and SDD has also been found to significantly increase serum levels of both cardio-protective HDL cholesterol and its core molecule apolipoprotein A-I in ASCVD-vulnerable patients with periodontitis. Our current research suggests that one mechanism involved may be the ability of SDD to inhibit MMP-mediated HDL loss by protecting apolipoprotein A-I from proteinase attack. These pleiotropic mechanisms of non-antimicrobial tetracyclines provide significant therapeutic potential to treat chronic inflammatory diseases including both periodontitis and ASCVD., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Developing advanced surgical tools for minimally invasive procedures represents an activity of central importance to improving human health. A key challenge is in establishing biocompatible interfaces between the classes of semiconductor device and sensor technologies that might be most useful in this context and the soft, curvilinear surfaces of the body. This paper describes a solution based on materials that integrate directly with the thin elastic membranes of otherwise conventional balloon catheters, to provide diverse, multimodal functionality suitable for clinical use. As examples, we present sensors for measuring temperature, flow, tactile, optical and electrophysiological data, together with radiofrequency electrodes for controlled, local ablation of tissue. Use of such 'instrumented' balloon catheters in live animal models illustrates their operation, as well as their specific utility in cardiac ablation therapy. The same concepts can be applied to other substrates of interest, such as surgical gloves.

Background: Periodontitis has been reported to be associated with coronary artery disease (CAD). Research is needed to determine if therapies that improve periodontal health also reduce systemic measures of inflammation associated with both diseases., Methods: The study registrar randomly assigned 128 eligible postmenopausal women with chronic periodontitis to a twice-daily regimen of subantimicrobial-dose-doxycycline (SDD) or placebo tablets for two years as an adjunct to periodontal maintenance therapy. Through a supplement to the main trial, in which they investigated alveolar bone and clinical attachment level changes, the authors assayed inflammatory mediators and lipid profiles in baseline, one-year and two-year serum samples. The authors analyzed the data by using generalized estimating equations., Results: In the intent-to-treat analysis across two years, SDD treatment reduced median high-sensitivity C-reactive protein (hs-CRP) by 18 percent (primary outcome; P = .02) and reduced serum matrix metalloproteinase (MMP)-9 (92 kilodalton gelatinase; difference in mean scanning units, -28.44; P < .001), with no significant effect on serum lipids. However, in women more than five years postmenopausal, SDD elevated the level of high-density lipoprotein (HDL) cholesterol (difference in means [milligrams per deciliter], 5.99; P = .01)., Conclusion: A two-year SDD regimen in postmenopausal women significantly reduced the serum inflammatory biomarkers hs-CRP and MMP-9 and, among women more than five years postmenopausal, increased the HDL cholesterol level., Clinical Implications: SDD significantly reduced the systemic inflammatory biomarkers hs-CRP and MMP-9. More research is needed to determine whether SDD has a role in managing the care of patients at risk of developing CAD.

Polymeric endoaortic paving (PEAP) is a process by which a polymer is endovascularly delivered and thermoformed to coat or "pave" the lumen of the aorta. This method may offer an improvement to conventional endoaortic therapy in allowing conformal graft application with reduced risk of endoleak and customization to complex patient geometries. Polycaprolactone (PCL)/polyurethane (PU) blends of various blend ratios were assessed as a potential material for PEAP by characterizing their mechanical, thermoforming and degradation properties. Biaxial tension testing revealed that the blends' stiffness is similar to that of aortic tissue, is higher for blends with more PCL content, and may be affected by thermoforming and degradation. Tubes of blends were able to maintain a higher diameter increase after thermoforming at higher PCL content and higher heating temperatures; 50/50 blend tubes heated to 55 °C were able to maintain 90% of the diameter increase applied. Delamination forces of the blends ranged from 41 to 235 N m⁻². In a Pseudomonas lipase solution, the 50/50 blend had a 94% lower degradation rate than pure PCL, and the 10/90 blend exhibited no degradation. These results indicate that PEAP, consisting of a PCL/PU blend, may be useful in developing the next generation of endoaortic therapy., (Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Objective: We evaluated the early pharmacodynamic profile of the combined 30 mg intravenous and 1 mg/kg subcutaneous enoxaparin loading utilized in the TIMI 11B and ExTRACT TIMI 25 trials., Background: It has not been reported whether anti-Xa levels appropriate for percutaneous coronary intervention (PCI) can be reliably achieved within 2 h utilizing this regimen., Methods: Twenty-six patients with acute coronary syndrome (ACS) treated with this regimen had anti-Xa levels measured at 5 min, 2, 4, 6 and 8 h., Results: Seventy-six percent of patients had anti-Xa levels above 0.5 IU/ml at 5 min. Dose-response curves showed all patients to have anti-Xa levels above 0.5 IU/ml within 1 h. Anti-Xa remained in the targeted range for PCI (0.5 to 1.8 IU/ml) at 2, 4, 6 and 8 h in all patients., Conclusion: This regimen is well suited for ACS treatment with an invasive strategy, including the rapid transition to early and rescue PCI.

Congenital quadricuspid aortic valves (QAVs) are rare phenomena. They are often associated with aortic insufficiency and significant morbidity. A QAV with an associated ascending aortic aneurysm is extremely rare, and these conditions might have a shared embryonic etiology. We describe the case of a patient with a QAV associated with aortic aneurysm. Pertinent literature on the QAV is reviewed, and embryological factors that may contribute to its pathogenesis are discussed.

Background: Safety and efficacy studies of various mechanical circulatory support devices are important, but may not be strictly comparable. Lacking prospective randomized studies for different devices, we believe that comparison of risk factor analyses may give the surgeon a tool more powerful than current studies for matching a patient with an appropriate device. In this paper, we report risk factor profiles for bridge to transplantation with the CardioWest total artificial heart and summarize reports for other devices., Methods: A multiinstitutional risk factor analysis of the CardioWest total artificial heart, as a bridge to transplantation in 81 patients, was conducted. Univariate analyses were performed on 43 preimplantation prognostic factors. From this group, eight factors were chosen for multivariate analysis. Our results were compared with all recent risk factor analyses for other devices., Results: Independent predictors for death at three intervals by multivariate analysis were as follows: "implant to transplant": history of smoking (odds ratio, 34); "implant to 30 days after transplant": history of smoking (odds ratio, 10.00), prothrombin time greater than 16 seconds (odds ratio, 4.76); and "implant to 1 year after transplant": prothrombin time greater than 16 seconds (odds ratio, 3.85). The major difference between this experience and multiple reported experiences with left ventricular assist devices is that for left ventricular assist devices, but not for the temporary CardioWest total artificial heart, right heart failure, high central venous pressure, and being on a ventilator (with or without sepsis) were independent predictors of mortality., Conclusions: Risk factors for bridge to transplantation with the CardioWest total artificial heart are different from those reported for left ventricular assist devices. Recognition of these risk factor differences may facilitate appropriate device selection.

Background: The SynCardia CardioWest total artificial heart (CardioWest TAH) is a biventricular, orthotopic, pneumatic, pulsatile blood pump driven by an external console. For each ventricle, the length of the blood-flow path is shorter and the inflow and outflow valves are larger than in any other bridge-to-transplant device, resulting in greater blood flow at smaller pre-load. Such a device should be optimal for bridging transplant candidates who have biventricular failure and for whom all other therapies have failed., Methods: From January 1, 1993, to April 1, 2002, we prospectively studied 62 consecutive CardioWest TAH implant recipients to document safety and efficacy in bridge to transplantation. We used multisystem monitoring and multidrug therapy for anti-coagulation in 58 patients starting September 1, 1994., Results: Before implantation, patients were critically ill with biventricular heart failure. Mortality in this group from the time of implantation until transplantation was 23%. Causes of death during device support included multi-organ failure (6), sepsis (3), and valve entrapment (2). Forty-eight patients underwent transplantation (77%). Forty-two survived to hospital discharge (68% of the total, 88% of those undergoing transplantation). Adverse events included bleeding (20%), device malfunction (5%), fit complications (3%), mediastinal infections (5%), visceral embolus (1.6%), and stroke during support (1.6%). The linearized stroke rate was 0.068 events per patient-year., Conclusions: Sixty-eight percent of critically ill transplant candidates for whom medical therapy failed were bridged to transplantation with the CardioWest TAH and survived long-term. Most deaths that occurred during device support were related to pre-implant problems. Infection and stroke were rare events. Therefore, we recommend the CardioWest TAH as the biventricular bridge-to-transplant device of choice.

Objective: The objective of this study was to assess acute patency of a new myocardial revascularization device that connects the left ventricular cavity to a coronary artery (termed ventriculo-coronary artery bypass, VCAB) thereby providing proximal and distal blood flow from the site of the anastomosis., Methods: A device made of expanded polytetrafluoroethylene and low density polyethylene was implanted from the base of the left ventricle to the mid left anterior descending coronary artery (LAD) in 11 juvenile domestic pigs using a beating heart approach. Flow rates were measured in the distal LAD before and after implant using ultrasonic flow techniques, and patency was assessed at explant at either 2 or 4 weeks post-implantation. Myocardial perfusion using positron emission tomography (PET) was assessed in a separate set of pigs (n=2) revascularized by VCAB 2 weeks post-implant., Results: Net forward flow distal to the implanted device was 73 +/- 15% of native LAD flow. PET demonstrated that the target myocardium was perfused at 85% of that seen in the remote, control myocardium. Device patency rate was 80% (4/5) at 2 weeks in one set of pigs and 83% (5/6) at 4 weeks in a second set of pigs. Histologic analysis showed formation of neointima along the extraventricular segment of the device., Conclusions: This study demonstrates the promise of perfusing ischemic myocardium using a VCAB approach with a device that provides blood flow both proximal and distal to the anastomosis. Patency of the transmyocardial device was encouraging at 2 and 4 weeks and warrants further investigation.

The CardioWest TAH was created and initially tested at the same time as the Thoratec, Novacor, and HeartMate devices. It was designed as a permanent artificial heart and was the first-ever mechanical circulatory device to be used as destination therapy. Twenty years have passed since that early experience. Pneumatic technology is still current and being developed as in existing or new implantable Thoratec VADs the pneumatic HeartMate, and the Abiomed BVS 5000 pumps. Portable pneumatic drivers have been available since 1982, and in recent times have allowed discharge to home of substantial numbers of patients, thus reducing the length of hospital stays and making mechanical device support less expensive to society and more tolerable to patients. Within months, a portable driver for the CardioWest will be available. The documented benefits of the CardioWest TAH include rescue of: critically ill patients with advanced heart failure; patients with biventricular failure especially those with significant right heart failure, elevated pulmonary vascular resistance, or pulmonary edema; patients with renal or hepatic failure secondary to low cardiac output; patients with massive myocardial damage such as those with post-\infarction VSD or irreversible cardiac graft rejection; patients with mechanical valves or native valve disease; and patients with intractable arrhythmias and heart failure. High device outputs with restoration of normal filling pressures result in high perfusion pressures that have led to dramatic recoveries, convalescence, and return to levels of activity compatible with normal life. The average device output with the CardioWest TAH is higher than any other approved or investigational device. The reason for this resides in design simplicity this device has the shortest and largest inflow pathway. Stroke, in the authors' own series, is rare with a linearized rate of 0.068 events per patient year. If the experiences of La Pitie and the University of Arizona are combined, there has been one stroke in 25 patient years (0.04 events/patient year). Serious infections have been rare (12% of patients). No clinical mediastinitis has occurred. Drivelines have healed in tightly and never caused an "ascending" infection. There has not been a case of device endocarditis. Using a broad definition of bleeding, including takeback reoperation for bleeding, bleeding more than 8 units in the first postoperative 24 hours or 5 units over any other 48-hour period, a 25% to 36% incidence has been documented. No cases of fatal exsanguination have resulted, as there have been with the HeartMate. The incidence of bleeding as an adverse event is about 17% lower than the rate reported for the HeartMate VE LVAD, and it is about the same as that reported for Novacor and for Thoratec. Implantation of this device is relatively easy and often done (with attending help) by the authors' residents. If one follows the guidelines for fitting the device, and takes the recommended advice for implantation, hemostasis is excellent and restoration of immediate cardiac function with high flows is nearly automatic. Use of a neopericardium of 0.1 mm EPTFE at the time of implantation assures atraumatic and relatively quick re-entry for transplantation and prevents the normal inflammatory mediastinal reaction that might be desirable in a destination application. In selected patients the CardioWest TAH is the device of choice for bridge to transplantation. When a portable driver becomes available, out of hospital management of CardioWest TAH patients will be feasible and consideration of use of this device for longer term applications, (e.g., "destination therapy,") will be reasonable. A wearable driver, even smaller than a portable, will improve quality of life and expand the patient population that may be therapeutically served with this system. In short, the CardioWest TAH has come nearly full circle. It was first used as a destination device. It has since been used as a bridge to transplantation in nearly 200 patients as the Jarvik-7/Symbion TAH and, since 1993, in over 225 patients as CardioWest. The results have improved with time. Thromboembolism and infection rates have been competitive with currently available devices. Device reliability and durability have been excellent. Survival rates have been very high in a group of perhaps the sickest patients to be supported with any pulsatile device. Pneumatic technology has improved with portability and miniaturization, and there is reason to believe that it will become even better. Application of modern manufacturing techniques to this very simple device raises the possibility of significant manufacturing cost reduction, in an era of prohibitive cost for other devices. All of this establishes the CardioWest as a valuable device for any program that is seriously interested in end-stage heart disease and a likely device for permanent use in appropriately selected patients.

Background and Purpose: Despite the advance of laparoscopic partial nephrectomy, significant technical limitations remain with regard to control of bleeding and closure of the collecting system. An attractive approach on the horizon for local hemostatic and wound control is the use of local tissue sealants. To date, sealants remain largely derived from natural biologic products and are difficult to apply laparoscopically with precise local control. In this study, we examined the novel strategy of forming occlusive tissue-adherent hydrogels utilizing a synthetic biodegradable polyethylene glycol-lactide copolymer (PEG-lactide) as an in situ occlusive barrier for hemostasis and wound control. Specifically, the objects of this study were to determine if PEG-lactide hydrogels could be formed intraperitoneally on renal tissue, to test the adhesiveness of the hydrogels to injured renal parenchyma, and to evaluate the ability of adherent hydrogel barriers to limit renal parenchymal bleeding and collecting system leakage following renal pole amputation or wedge excision., Materials and Methods: Five kidneys from three female pigs were used in a nonsurvival study. A standardized model for laparoscopic partial nephrectomy was created by performing wedge excision or polar amputation under vascular control using a laparoscopic Satinsky clamp. Bleeding briskness following injury was assessed utilizing a scoring system and free blood quantitated comparing a conventional "clamp and wait" strategy with an adherent hydrogel strategy. For the hydrogel group, PEG-lactide hydrogel primer and macromer were applied through laparoscopic ports. The hydrogel was polymerized using a xenon light source, and the pedicle clamp was released to observe for bleeding. A subsequent opposite polar injury was created to confirm renal perfusion and the sites were compared. The kidneys were removed, and the adhesion of the hydrogel to the renal parenchyma was examined., Results: The PEG-lactide macromer was effectively applied to five kidneys following partial nephrectomy. In all cases, successful intraperitoneal in situ polymerization was achieved, with resultant hydrogel formation. Polymeric hydrogel adhesion to the cut renal parenchyma was assessed semiquantitatively following vigorous cyclic washing. In all cases, polymer gels remained adherent without any evidence of peeling, delamination, or separation from the underlying tissue surface. In the control group, the mean bleeding score was 2.63 +/- 0.48 v 0.00 +/- 0.00 in the gel-treated group (P < 0.001). Blood loss in the control group was 56 +/- 5 ml v 0.00 +/- 0.00 in the gel-treated group (P < 0.001). In an ex vivo retrograde ureteral perfusion, no leakage was observed at pressure as high as 100 mm Hg., Conclusions: In this feasibility study, a biodegradable PEG-lactide polymer system photopolymerized rapidly in situ on exposed renal parenchymal surfaces, forming adherent hydrogel barriers. When applied during vascular clamping, an adequate physical bond and patch-like cap was created to prevent bleeding at physiologic renal perfusion pressures. Use of locally applied occlusive hydrogels holds promise for hemostasis and local wound control during laparoscopic urologic procedures.