Search

Purpose This study aims to investigate the effect of the wall thickness, deposition orientation and two different post-processing methods on the local mechanical properties and microstructure of additively manufactured parts made of maraging steel. In order to examine the local properties of the build, miniaturized testing specimens were employed. Before application of small-sized specimens, their performance was verified. Design/methodology/approach The investigation was composed of two stages. As first, the part thickness, specimen size and orientation were studied on a laser-powder bed fusion (L-PBF) platform with deposited walls of various thicknesses made of maraging steel. Subsequently, the influence of different heat-treatment methods was investigated on the final product, i.e. impellers. The miniaturized and standard tensile tests were performed to investigate the local mechanical properties. The porosity, microstructures and fracture surfaces were analysed by X-ray-computed tomography, X-ray diffraction and scanning electron microscopy with electron backscatter diffraction. Findings The results revealed good agreement between the values provided by miniaturized and standard specimens. The thinnest parts produced had the largest pores and the highest scatter of elongation values. In these cases, also the sub-contour porosity was observed. Part thickness affected pores’ size and results repeatability but not total porosity. The two-step heat-treatment (solutionizing and age-hardening) exhibited the highest yield and ultimate tensile strength. Practical implications The microstructure and local mechanical properties were studied on L-PBF platform with deposited walls of various thicknesses. Subsequently, a detailed analysis was conducted on real components (impellers) made of maraging steel, commonly used in tooling, automotive and aerospace industries. Originality/value The broadly understood quality of manufactured parts is crucial for their reliable and long-lasting operation. The findings presented in the manuscript allow the readers better understanding of the connection between deposition parameters, post-processing, microstructure and mechanical performance of additive manufacturing-processed parts.

Climate-induced changes in precipitation and temperature can have a profound impact on watershed hydrological regimes, ultimately affecting agricultural yields and the quantity and quality of surface water systems. In India, the majority of the watersheds are facing water quality and quantity issues due to changes in the precipitation and temperature, which requires assessment and adaptive measures. This study seeks to evaluate the effects of climate change on the water quality and quantity at a regional scale in the Nagavali and Vamsadhara watersheds of eastern India. The impact rainfall variations in the study watersheds were modeled using the Soil and Water Assessment Tool (SWAT) with bias-corrected, statistically downscaled models from Coupled Model Intercomparison Project-6 (CMIP-6) data for historical (1975–2014), near future (2022–2060), and far future (2061–2100) timeframes using three Shared Socioeconomic Pathways (SSP) scenarios. The range of projected changes in percentage of mean annual precipitation and mean temperature varies from 0 to 41.7% and 0.7 °C to 2.7 °C in the future climate, which indicates a warmer and wetter climate in the Nagavali and Vamsadhara watersheds. Under SSP245, the average monthly changes in precipitation range from a decrease of 4.6% to an increase of 25.5%, while the corresponding changes in streamflow and sediment yield range from −11.2% to 41.2% and −15.6% to 44.9%, respectively. Similarly, under SSP370, the average monthly change in precipitation ranges from −3.6% to 36.4%, while the corresponding changes in streamflow and sediment yield range from −21.53% to 77.71% and −28.6% to 129.8%. Under SSP585, the average monthly change in precipitation ranges from −2.5% to 60.5%, while the corresponding changes in streamflow and sediment yield range from −15.8% to 134.4% and −21% to 166.5%. In the Nagavali and Vamsadhara watersheds, historical simulations indicate that 2438 and 5120 sq. km of basin areas, respectively, were subjected to high soil erosion. In contrast, under the far future Cold-Wet SSP585 scenario, 7468 and 9426 sq. km of basin areas in the Nagavali and Vamsadhara watersheds, respectively, are projected to experience high soil erosion. These results indicate that increased rainfall in the future (compared to the present) will lead to higher streamflow and sediment yield in both watersheds. This could have negative impacts on soil properties, agricultural lands, and reservoir capacity. Therefore, it is important to implement soil and water management practices in these river basins to reduce sediment loadings and mitigate these negative impacts. Published version

The creep properties of a laser-directed energy deposition (L-DED) technique manufactured Inconel 718 (IN718) was investigated at 650 °C/700 MPa. Microstructure and creep properties of L-DED IN718 samples were tailored by various post heat treatments involving homogenization heat treatment with temperature ranging from 1080 to 1180 °C + double aging and hot isostatic pressing (HIP). Microstructural changes and their influence on the creep behavior and fracture mechanism were observed and discussed. The results show that L-DED sample heat treated by a simple double aging exhibits a 49% increase in creep lifetime tr and a comparable creep elongation ɛf when compared to the wrought material, due to the reserved coarse dislocation cell substructure from the L-DED process. The loss of dislocation cell structure and the coarsening of grains at higher temperature of heat treatments contributes to a shorter tr, εf, but faster ε̇min (minimum creep rate). The present work demonstrates that a simultaneous improvement of creep strength and creep elongation can be achieved in the case of a coarse-grained L-DED IN718 by a double aging treatment which can preserve both the strengthening precipitates and an appropriate size of dislocation cells.

Supersaturation mediated large area growth of hexagonal boron nitride (h-BN) for graphene electronics.

Networks and systems which exhibit brain-like behavior can analyze information from intrinsically noisy and unstructured data with very low power consumption. Such characteristics arise due to the critical nature and complex interconnectivity of the brain and its neuronal network. We demonstrate that a system comprising of multilayer hexagonal Boron Nitride (hBN) films contacted with Silver (Ag), that can uniquely host two different self-assembled networks, which are self-organized at criticality (SOC). This system shows bipolar resistive switching between high resistance (HRS) and low resistance states (LRS). In the HRS, Ag clusters (nodes) intercalate in the van der Waals gaps of hBN forming a network of tunnel junctions, whereas the LRS contains a network of Ag filaments. The temporal avalanche dynamics in both these states exhibit power-law scaling, long-range temporal correlation, and SOC. These networks can be tuned from one to another with voltage as a control parameter. For the first time, different neuron-like networks are realized in a single CMOS compatible, 2D materials platform.