Search

Millimeter-wave (mmWave) communication systems rely on large-scale antenna arrays to combat large path-loss at mmWave band. Due to hardware characteristics and deployment environments, mmWave large-scale antenna systems are vulnerable to antenna element blockages and failures, which necessitate diagnostic techniques to locate faulty antenna elements for calibration purposes. Current diagnostic techniques require full or partial knowledge of channel state information (CSI), which can be challenging to acquire in the presence of antenna failures. In this letter, we propose a blind diagnostic technique to identify faulty antenna elements in mmWave large-scale antenna systems, which does not require any CSI knowledge. By jointly exploiting the sparsity of mmWave channel and failure pattern, we first formulate the diagnosis problem as a joint sparse recovery problem. Then, the atomic norm is introduced to induce the sparsity of mmWave channel over continuous Fourier dictionary. An efficient algorithm based on alternating direction method of multipliers (ADMM) is proposed to solve the formulated problem. Finally, the performance of the proposed technique is evaluated through numerical simulations.

Intelligent reflecting surface (IRS) is a promising technology for enhancing wireless communication systems. It adaptively configures massive passive reflecting elements to control wireless channel in a desirable way. Due to hardware characteristics and deploying environments, an IRS may be subject to reflecting element blockages and failures, and hence developing diagnostic techniques is of great significance to system monitoring and maintenance. In this paper, we develop diagnostic techniques for IRS systems to locate faulty reflecting elements and retrieve failure parameters. Three cases of channel state information (CSI) availability are considered. In the first case where full CSI is available, a compressed sensing based diagnostic technique is proposed, which significantly reduces the required number of measurements. In the second case where only partial CSI is available, we jointly exploit the sparsity of the millimeter-wave channel and the failure, and adopt compressed sparse and low-rank matrix recovery algorithm to decouple channel and failure. In the third case where no CSI is available, a novel atomic norm is introduced as the sparsity-inducing norm of the cascaded channel, and the diagnosis problem is formulated as a joint sparse recovery problem. Finally, the proposed diagnostic techniques are validated through numerical simulations.

Some OpenMP multi-threaded applications increasingly suffer from performance anomaly owning to shared resource contention as well as software- and hardware-related problems. Such performance anomaly can result in failure and inefficiencies, and are among the main challenges in system resiliency. To minimize the impact of performance anomaly, one must quickly and accurately detect and diagnose the performance anomalies that cause the failures. However, it is difficult to identify anomalies in the dynamic and noisy data collected by OpenMP multi-threaded monitoring infrastructures. This paper presents a novel machine learning framework for performance anomaly in OpenMP multi-threaded systems. To evaluate our framework, the NAS Parallel NPB benchmark, EPCC OpenMP micro-benchmark suite, and Jacobi benchmark are used to test the performance of our framework proposed. The experimental results demonstrate that our framework successfully identifies 90.3\% of injected anomalies of OpenMP multi-threaded applications., Comment: arXiv admin note: substantial text overlap with arXiv:2011.01419

This paper presents a novel heartbeat diagnosis regarding performance anomaly for OpenMP multi-threaded applications. First, we design injected heartbeat APIs for OpenMP multi-threaded applications. Then, we leverage the heartbeat sequences to extract features of previously-observed anomalies. Finally, we adopt a tree-based algorithm, namely HSA, to identify the features that are required to diagnose anomalies. To evaluate our framework, the NAS Parallel NPB benchmark, EPCC OpenMP micro-benchmark suite, and Jacobi benchmark are used to test the performance of our approach proposed.

Lutwak, Yang and Zhang [23] introduced the concept of Lp dual curvature measure for convex bodies and star bodies, and studied the Minkowski problem. We in this paper establish a new unified concept, in briefly, the (p,q)-mixed quermassintegrals, via (p,q)-dual mixed curvature measure, and further have a deep discussion on Minkowski problem with respect to the (p,q)-dual mixed curvature measure. By the way, we derive at some important properties and geometric inequalities for (p,q)-mixed quermassintegrals., Comment: 28 pages, 1 figure

Time-division-duplexing massive multiple-input multiple-output (MIMO) systems estimate the channel state information (CSI) by leveraging the uplink-downlink channel reciprocity, which is no longer valid when the mismatch arises from the asymmetric uplink and downlink radio frequency (RF) chains. Existing works treat the reciprocity mismatch as constant for simplicity. However, the practical RF chain consists of nonlinear components, which leads to nonlinear reciprocity mismatch. In this work, we examine the impact and the calibration approach of the nonlinear reciprocity mismatch in massive MIMO systems. To evaluate the impact of the nonlinear mismatch, we first derive the closed-form expression of the ergodic achievable rate. Then, we analyze the performance loss caused by the nonlinear mismatch to show that the impact of the mismatch at the base station (BS) side is much larger than that at the user equipment side. Therefore, we propose a calibration method for the BS. During the calibration, polynomial function is applied to approximate the nonlinear mismatch factor, and over-the-air training is employed to estimate the polynomial coefficients. After that, the calibration coefficients are computed by maximizing the downlink achievable rate. Simulation results are presented to verify the analytical results and to show the performance of the proposed calibration approach.

Nonlinearity of power amplifier is one of the major limitations to the achievable capacity in wireless transmission systems. Nonlinear impairments are determined by the nonlinear distortions of the power amplifier and modulator imperfections. The Volterra model, several compact Volterra models and neural network models to establish a nonlinear model of power amplifier have all been demonstrated. However, the computational cost of these models increases and their implementation demands more signal processing resources as the signal bandwidth gets wider or the number of carrier aggregation. A completely different approach uses deep convolutional neural network to learn from the training data to figure out the nonlinear distortion. In this work, a low complexity, general architecture based on the deep real-valued convolutional neural network (DRVCNN) is proposed to build the nonlinear behavior of the power amplifier. With each of the multiple inputs equivalent to an input vector, the DRVCNN tensor weights are constructed from training data thanks to the current and historical envelope-dependent terms, I, and Q, which are components of the input. The effectiveness of the general framework in modeling single-carrier and multi-carrier power amplifiers is verified.

In this paper, we propose a novel behavior model for wideband PAs using a real-valued time-delay convolutional neural network (RVTDCNN). The input data of the model are sorted and arranged as the graph composed of the in-phase and quadrature (I/Q) components and envelope-dependent terms of current and past signals. We design a pre-designed filter using the convolutional layer to extract the basis functions required for the PA forward or reverse modeling. The generated rich basis functions are modeled using a simple fully connected layer. Because of the weight sharing characteristics of the convolutional structure, the strong memory effect does not lead to a obvious increase in the complexity of the model. Meanwhile, the extraction effect of the pre-designed filter also reduces the training complexity of the model. The experimental results show that the performance of the RVTDCNN model is almost the same as the NN models and the multilayer NN models.

Federated learning is a communication-efficient training process that alternates between local training at the edge devices and averaging the updated local model at the central server. Nevertheless, it is impractical to achieve a perfect acquisition of the local models in wireless communication due to noise, which also brings serious effects on federated learning. To tackle this challenge, we propose a robust design for federated learning to alleviate the effects of noise in this paper. Considering noise in the two aforementioned steps, we first formulate the training problem as a parallel optimization for each node under the expectation-based model and the worst-case model. Due to the non-convexity of the problem, a regularization for the loss function approximation method is proposed to make it tractable. Regarding the worst-case model, we develop a feasible training scheme which utilizes the sampling-based successive convex approximation algorithm to tackle the unavailable maxima or minima noise condition and the non-convex issue of the objective function. Furthermore, the convergence rates of both new designs are analyzed from a theoretical point of view. Finally, the improvement of prediction accuracy and the reduction of loss function are demonstrated via simulations for the proposed designs.