Search

Objective. Synthetic transmit aperture (STA) ultrasound imaging is well known for ideal focusing in the full field of view. However, it suffers from low signal-to-noise ratio (SNR) and low frame rate, because each transducer element must be activated individually. In our previous study, we encoded all the transducer elements with partial Hadamard matrix and reconstructed the complete STA dataset with compressed sensing (CS) algorithm (CS-STA). As all the elements are activated in each transmission and the number of transmissions is smaller than that of STA, this method can achieve higher SNR and higher frame rate. Its main drawback is the time-consuming CS reconstruction (∼hours). In this study, we propose to accelerate the complete STA dataset reconstruction with minimal l 2-norm least squares method. Approach. Partial Hadamard apodized plane wave (PW) transmissions were performed to acquire the PW dataset. Thereafter, the complete STA dataset can be reconstructed from the PW dataset with minimal l 2-norm least squares method. Due to the orthogonality of partial Hadamard matrix, the minimal l 2-norm least squares solution can be easily calculated. Main results. The proposed method is tested with simulation data and experimental phantom and in-vivo data. The results demonstrate that the proposed method achieves ∼5 × 103 times faster reconstruction speed than CS algorithm. The simulation results demonstrate that the proposed method is capable of achieving the same accuracy as the conventional CS-STA method for the STA dataset reconstruction. The simulations, phantom and in-vivo experiments show that the proposed method is capable of improving the generalized contrast-to-noise ratio (gCNR) and SNR with maintained spatial resolution and fewer transmissions, compared with STA. Significance. In conclusion, the improved image quality and reduced computational time of LS-STA pave the way for its real-time applications in the clinics. [ABSTRACT FROM AUTHOR]

Multitemporal interferometric synthetic aperture radar (MT-InSAR) technique is an important approach for surface deformation monitoring. Nonlocal adaptive multilooking approach has potential benefits for the filtering and coherence estimation in the data preprocessing steps of MT-InSAR technique. The kernel of nonlocal adaptive multilooking approach lies in the selection of statistically homogeneous pixels (SHPs). Various amplitude-based strategies, such as DespecKS and its variations, have been proposed for selecting SHPs. However, the detection rates of these methods are usually unsatisfactory in the case of small data sets. To overcome this limitation, SHPs are selected based on the adaptive joint data vector, which encompasses both time dimensional samples and spatial information. In this letter, the outliers of the time dimensional samples are removed first based on a revised boxplot method. Additionally, image segmentation and L1 norm are both introduced to adaptively construct joint data vector in the preset window. Experiments on five TSX images are used to verify the reliability and efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

A new polyacetylene glucoside, Dendranacetylene A (1), and a known compound 8E-decaene-4,6-diyn-1-O-β-d-glucopyranosyl-(1ʺ→2ʺ)-β-d-glucopyranoside (2) were isolated from the flowers of Dendranthema morifolium (Ramat.) kitam. The chemical structures of these compounds were elucidated by NMR and HR-ESI-MS analysis, and comparing these results with data reported in literatures. Additionally, the anti-inflammatory effects of compounds 1 and 2 were evaluated on RAW264.7 murine macrophage cells induced by lipopolysaccharide (LPS). The two compounds significantly inhibited the NO production in LPS-induced RAW 264.7 murine macrophage cells and exhibited anti-inflammatory effects. [ABSTRACT FROM AUTHOR]

In order to study the effects of impedance forces of couplings on energy absorption in train crash, a dynamics model of train longitudinal crash was established. Taking maximum average acceleration, maximum instantaneous acceleration, and maximum plastic deformation of car body as optimization objectives, while taking the impedance forces of different couplings as optimization parameters, optimal solution set was obtained by NSGA-II algorithm. And then, a comprehensive evaluation system for the optimization objectives was established, and the optimal solution was selected. Crash acceleration of the train after optimization is less than that of train before optimization, which is due to the smaller interfacial force difference between two ends of the vehicles. [ABSTRACT FROM AUTHOR]

Grout injection is an effective technique for repairing cracks in earthen sites. This study aims to address the challenges of Calcined Ginger Nuts (CGN)-based grout and enhance its engineering performance by investigating the compatibility of different superplasticizers. We examined the effects of Polycarboxylate Superplasticizer (PCE) and Naphthalene Superplasticizer (PNS) on the properties of CGN-based grout, focusing on fluidity, rheological properties, mechanical strength, volume stability, color difference, and pore structure. The engineering applicability of the optimized CGN-based grout with superplasticizers was assessed using COMSOL Multiphysics. The results show that fluidity increased with higher dosages of PCE and PNS. The grout containing these superplasticizers behaved as a shear-thinning fluid, following the power law model. Specifically, the consistency coefficient of grout with 0.5 wt% PCE and PNS decreased by 39.73% and 64.83%, respectively. Additionally, 2.9 wt% PCE and PNS reduced volume shrinkage rate by 6.86% and 6.27%, respectively. Initially, increasing the dosage of PCE and PNS improved compressive and flexural strength, but these properties later declined. XRD analysis revealed that PNS above 1.1 wt% and PCE weakened the hydration reaction, while both superplasticizers promoted carbonation. Mercury Intrusion Porosimetry (MIP) showed that 1.1 wt% PCE and PNS reduced the proportion of capillary pores by 13.79% and 10.11%, respectively. Based on these findings, 0.5 wt% PNS demonstrated the best compatibility with CGN-based grout, whereas PCE showed poor compatibility. Numerical simulations using COMSOL Multiphysics confirmed that 0.5 wt% PNS provided superior grouting effectiveness. Therefore, the CGN based grout with 0.5wt% PNS demonstrates excellent engineering performance and applicability. This study offers valuable insights into optimizing CGN-based grout for the preservation of earthen sites. [ABSTRACT FROM AUTHOR]