Search

The aim of this study was to examine the effect of aPDT with visual light (VIS) + water-filtered infrared A (wIRA) as a light source, and tetrahydroporphyrin-tetratosylate (THPTS) as a photosensitizer on in situ initial and mature oral biofilms. The samples were incubated, ex situ, with THPTS for two minutes, followed by irradiation with 200 mW cm &minus, 2 VIS + wIRA for five minutes at 37 &deg, C. The adherent microorganisms were quantified, and the biofilm samples were visualized using live/dead staining and confocal laser scanning microscopy (CLSM). The THPTS-mediated aPDT resulted in significant decreases in both the initially adherent microorganisms and the microorganisms in the mature oral biofilms, in comparison to the untreated control samples (&gt, 99.99% each, p = 0.018 and p = 0.0066, respectively). The remaining vital bacteria significantly decreased in the aPDT-treated biofilms during initial adhesion (vitality rate 9.4% vs. 71.2% untreated control, 17.28% CHX). Of the mature biofilms, 25.67% remained vital after aPDT treatment (81.97% untreated control, 16.44% CHX). High permeability of THPTS into deep layers could be shown. The present results indicate that the microbial reduction in oral initial and mature oral biofilms resulting from aPDT with VIS + wIRA in combination with THPTS has significant potential for the treatment of oral biofilm-associated diseases.

Objective: To assess the clinical and esthetic outcomes and patient satisfaction of screw-retained one-piece implant crowns fabricated with zirconia abutments after a 4.5- to 8.8-year follow-up. Material and methods: Thirty-two patients (12 women and 20 men), who received 40 implant single crowns in anterior and premolar sites, were included in this prospective study. All restorations were based on ceramic hand-veneered customized CAD/CAM zirconia abutments. The follow-up consisted of clinical and radiological examinations. The pink esthetic score-white esthetic score (PES-WES) was used to evaluate the esthetic outcome. Patients' satisfaction was assessed via visual analog scale (VAS). Results: Implant and prosthetic survival rates were 100% and 97.5%, respectively. Mean marginal bone loss was -0.17 mm (SD 1.16 mm). Probing depth was ≤4 mm in 98.7% and 5 mm in 1.3% of the sites; 8.3% of them were bleeding on probing positive. No technical or biological complications were observed except for one abutment fracture. The mean PES-WES scores were 7.0 and 7.1, respectively. VAS scores (10-point) of 9.41 for function and 9.26 for esthetics showed high patient satisfaction. Conclusion: After a mean observation period of 6 years and 7 months, screw-retained implant crowns based on veneered customized CAD/CAM zirconia abutments with conical connection showed very good clinical performance and may be recommended for the replacement of missing anterior and premolar teeth. (ClinicalTrials.gov # NCT04370314). Keywords: all-ceramic restorations; dental implant; implant crowns; one-piece implant crowns; screw-retained implant crowns; survival rate; zirconia abutments.

Summary Background & aims Oral nutritional supplements (ONS) administered to malnourished elders and other patients contain high-levels of carbohydrates that could be a potential risk factor for dental caries. This study aimed to evaluate the cariogenic potentials of ONS using intraoral plaque telemetry. Methods Ten ONS were tested on five healthy volunteers (mean age: 76.8 ± 9.15 years). Participants were requested to refrain from performing oral hygiene 3–7 days prior to testing. The pH-value below the dental plaque on the tooth was measured while the ONS was being consumed. After neutralizing the participant's saliva, a control solution (10% sucrose) was administered and telemetry measurements were repeated. Mean relative cariogenicity (RC) was calculated for each ONS. ANOVA and post hoc tests were used for statistical analyses (p Results All ten ONS were potentially cariogenic on enamel with an overall RC of 0.519 ± 0.35 (Range: Min = 0.31 ± 0.16; Max = 1.00 ± 0.34). RC differed significantly between the ONS (p = 0.002). RC was lower in ONS that contained high-protein (p = 0.018). RC was not influenced by other factors such as readily consumable (p = 0.102), flavor (p = 0.869), consistency (p = 0.126), fiber containing (p = 0.134), style (p = 0.112), and age of plaque (p = 0.339). Conclusions The ONS administered to elders and malnourished patients are potentially cariogenic. It is imperative that the administration of ONS must be based on individual needs to potentiate a maximum benefit. Wherever possible, an attempt to limit the use of high-carbohydrate containing ONS must be practiced along with the adoption of suitable preventive measures to arrest the development and progression of caries.

Necrotizing gingivitis (NG) is a necrotizing periodontal disease that differs from chronic gingivitis (CG). To date, both the microbiological causes and the involved host cytokine response of NG still remain unclear. Here, we investigated corresponding interdental plaque and serum samples from two groups of Chinese patients with CG (n = 21) or NG (n = 21). The microbiota were studied by 16S rRNA Illumina MiSeq sequencing of the microbial metagenome and by assessing quantitatively the abundance of the phylum Bacteroidetes, the genus Prevotella and the species T. forsythia, P. endodon-talis, and P. gingivalis using fluorescence in situ hybridization (FISH). With respect to the associated host response, the levels of 30 inflammatory mediators were quantified by multiplex immunoassay analysis. Differential microbial abundance analysis of the two disease groups revealed at the phylum level that Proteobacteria accounted for 67% of the differentially abundant organisms, followed by organisms of Firmicutes (21%) and Actinobacteria (9%). At the species level, significant differences in abundance were seen for 75 species of which 58 species were significantly more abundant in CG patients. Notably, the FISH analysis revealed that Bacteroidetes was the most prevalent phylum in NG. The multiplex cytokine assay showed significant quantitative differences between the disease groups for eight analytes (GM–CSF, G–CSF, IFN–α, IL–4, IL–13, TNF–α, MIG, and HGF). The G–CSF was found to be the most significantly increased inflammatory protein marker in NG. The next-generation sequencing (NGS) data supported the understanding of NG as a multi-microbial infection with distinct differences to CG in regard to the microbial composition., Antibiotics, 10 (10), ISSN:2079-6382

Chemomechanical preparation of the root canal system is considered to be the most important part of root canal treatment, including both mechanical removal of tissue remnants and dentine chips, and chemical elimination of biofilm and microorganisms. A number of different solutions and agitation techniques have been proposed for that purpose. It was the aim of the present study to investigate whether root canal cleanliness can be improved by using a hydroxyapatite nanoparticle-containing solution with and without sonic or ultrasonic agitation. Seventy-four single-rooted teeth were divided into four experimental groups (n = 15) and two control groups (n = 7). All teeth were split longitudinally and a groove and three holes were cut into the root canal wall and filled with dentinal debris. Final irrigation was performed using sodium hypochlorite or a hydroxyapatite nanoparticle-containing solution (Vector polish) activated with a sonically or an ultrasonically driven endodontic file. Two calibrated investigators rated the remaining debris using a four-score scale. The results were analyzed using a non-parametric test with α &lt, 0.05. Sonic and ultrasonic irrigation with sodium hypochlorite cleaned the grooves and holes well from debris. The hydroxyapatite nanoparticles activated by a sonic file cleaned grooves and holes equally well. Ultrasonically activated nanoparticles performance was clearly inferior. The syringe control-group left large amounts of debris in grooves and holes. The use of the hydroxyapatite nanoparticles used in this study did not improve removal of debris.

Background Pathologically elevated levels of matrix metalloproteinase-8 (MMP-8) and Lactoferrin in oral fluids have been associated with the presence of gingivitis/periodontitis. This study aimed to assess the origin of MMP-8 and Lactoferrin in periodontitis patients and to identify the degree to which conventional clinical parameters correlate with their presence. Methods A total of ten periodontitis and ten healthy patients were included in this study. Whole saliva (stimulated and unstimulated), parotid/sublingual glandular fluid and gingival crevicular fluid from pockets and sulci were tested for MMP-8 and Lactoferrin and protein concentrations were quantified using an ELISA assay. Clinical parameters were checked for potential associations with MMP-8 and Lactoferrin levels. Results Periodontal patients presented higher concentrations of MMP-8 and Lactoferrin in pockets than other sources (P = 0.03). Lactoferrin measurement was higher in the parotid compared to sublingual glandular fluid in periodontitis patients (P = 0.03). Increased probing pocket depth was positively correlated with high MMP-8 and Lactoferrin levels. Conclusions Periodontal pockets appear to be the major source of active matrix metalloproteinase and Lactoferrin, which also may also enter the oral cavity through the salivary glands. Since clinically healthy sites in periodontitis patients also had elevated biomarker levels, gingival crevicular fluid biomarker testing may be more predictive of future tissue breakdown than conventional clinical parameters.

Purpose: To systemically summarize current knowledge about regeneration of peri-implant defects based on available systematic reviews.Materials and Methods: A systematic search for review articles published between 2010 and 2020 in four databases was conducted. Only systematic reviews and meta-analyses were included. Based on the available literature, five questions of clinical importance on indication for regenerative approaches, surgical technique, methods of decontamination, outcome of therapy and adjunctive use of biological factors were formulated and answered.Results: The electronic search resulted in 312 studies, from which 264 studies were published between 2010 and 2020. Finally, 18 systematic reviews and one consensus report were chosen. Data of the included studies were based on 58 to 840 implants. Data on over 4.904 implants were assessed. From the 19 studies that were included, 15 assessed the outcome of regenerative therapy; three, the surgical protocol of regenerative therapy; two, the use of laser in regenerative therapy; and one, the additional use of growth factors in regenerative peri-implant therapy. Three studies assessed more than one topic.Conclusions: In general, a partial bone fill can be expected in 85% of regenerative procedures. Regeneration leads to a mean of 57% of greater bone fill, compared to open flap surgery only. Defect configuration plays a crucial role in the outcome, whereas the role and extent of benefit of different surgical protocols are still not clear.

Background This in-vitro-study aimed to evaluate the potential of different fluoride gels to prevent gastroesophageal reflux induced erosive tooth wear. Methods Surface baseline profiles of a total of 50 bovine enamel specimens [randomly assigned to five groups (G1–5)] were recorded. All specimens were positioned in a custom made artificial oral cavity and perfused with artificial saliva (0.5 ml/min). Reflux was simulated 11 times a day during 12 h by adding HCl (pH 3.0) for 30 s (flow rate 2 ml/min). During the remaining 12 h (overnight), specimens were stored in artificial saliva and brushed twice a day (morning and evening) with a toothbrush and toothpaste slurry (15 brushing strokes). While specimens in the control group (G1) did not receive any further treatment, specimens in G2–5 were coated with different fluoride gels [Elmex Gelée (G2); Paro Amin Fluor Gelée (G3); Paro Fluor Gelée Natriumfluorid (G4); Sensodyne ProSchmelz Fluorid Gelée (G5)] in the evening for 30 s. After 20 days, surface profiles were recorded again and enamel loss was determined by comparing them with the baseline profiles. The results were statistically analysed using one-way analysis of variance (ANOVA) followed by Tukey`s HSD post-hoc test. Results The overall highest mean wear of enamel (9.88 ± 1.73 µm) was observed in the control group (G1), where no fluoride gel was applied. It was significantly higher (p p = 0.918) and G4 (5.14 ± 0.82 µm, p > 0.999) showed the overall best protection from hydrochloric acid induced erosion. Enamel wear in G5 (6.64 ± 0.86 µm) was significantly higher compared to G2 (p = 0.028) and G4 (p = 0.047). Conclusions After 20 days of daily application, all investigated fluoride gels are able to significantly reduce gastroesophageal reflux induced loss of enamel.

This study investigated the effect of over-etching and prolonged application time of a universal adhesive on dentin bond strength. Ninety extracted human molars were ground to dentin and randomly allocated into nine groups (G1&ndash, 9, n = 10 per group), according to the following acid etching and adhesive application times. In the control group (G1), phosphoric acid etching was performed for 15 s followed by application of the universal adhesive Scotchbond Universal (3M) for 20 s, as per manufacturer&rsquo, s instructions. In groups G2&ndash, 5, both the etching and adhesive application times were either halved, doubled, quadrupled, or increased eightfold. In groups G6&ndash, 9, etching times remained the same as in G2&ndash, 5 (7.5 s, 30 s, 60 s, and 120 s, respectively), but the adhesive application time was set at 20 s as in the control group (G1). Specimens were then restored with a nanofilled composite material and subjected to microtensile bond strength testing. Bond strength data were statistically analyzed by ANOVA and Tukey&rsquo, s post-hoc tests (&alpha, = 0.05). The relationship of bond strength with etching and adhesive application time was examined using linear regression analysis. Treatment of dentin with halved phosphoric acid etching and adhesive application times (G2) resulted in a significant bond strength decrease compared to the control group (G1) and all other test groups, including the group with halved acid etching, but 20 s of adhesive application time (G6). No significant differences in bond strength were found for groups with multiplied etching times and an adhesive application time of 20 s or more, when compared to the control group (G1). In conclusion, a universal adhesive application time of at least 20 s is recommended when bonding to over-etched dentin.

New strategies to eradicate endodontic biofilms are needed. Therefore, we evaluated the effect of high-purity nisin alone and in combination with D-amino acids (D-AAs) or chlorhexidine (CHX) against an “endodontic-like” biofilm model. Biofilms were grown on hydroxyapatite discs for 64 h and treated with nisin, eight D-AAs mixture, nisin + eight D-AAs, 2% CHX, and nisin + 2% CHX. After the 5 min and 24 h treatments, biofilm cells were harvested and total colony-forming units were counted. Differences between groups were tested by two-way ANOVA followed by Tukey’s multiple comparisons test (p &lt, 0.05). Nisin and D-AAs, alone or in combination, were not effective in reducing bacteria after short or long exposure times. After 5 min, treatment with 2% CHX and nisin + 2% CHX resulted in 2 and 2.4-log cell reduction, respectively, compared with the no treatment control (p &lt, 0.001). After 24 h, 2% CHX and nisin + 2% CHX drastically reduced bacterial counts. In conclusion, high-purity nisin alone or in combination with D-AAs did not show antibacterial activity against multispecies biofilms. Moreover, combined treatment using nisin and CHX showed similar antibiofilm activity compared with the use of CHX alone.

Motion of the mandible and temporomandibular joint (TMJ) plays a pivotal role in the function of the dentition and associated hard and soft tissue structures, and facilitates mastication, oral communication and access to respiratory and digestive systems. Quantification of TMJ kinematics is clinically relevant in cases of prosthetic rehabilitations, TMJ disorders, osteoarthritis, trauma, tumour resection and congenital abnormalities, which are known to directly influence mandibular motion and loading. The objective of this systematic review was to critically investigate published literature on historic and contemporary measurement modalities used to quantify in vivo mandibular and TMJ kinematics in six degrees of freedom. The electronic databases of Scopus, Web of Science, Medline, Embase and Central were searched and 109 relevant articles identified. Publication quality was documented using a modified Downs and Black checklist. Axiography and ultrasonic tracking are commonly employed in the clinical setting due to their simplicity and capacity to rapidly acquire low-fidelity mandibular motion data. Magnetic and optoelectronic tracking have been used in combination with dental splints to produce higher accuracy measurements while minimising skin motion artefact, but at the expense of setup time and cost. Four-dimensional computed tomography provides direct 3D measurement of mandibular and TMJ motion while circumventing skin motion artefact entirely, but employs ionising radiation, is restricted to low sampling frequencies, and requires time-consuming image processing. Recent advances in magnetic tracking using miniature sensors adhered to the teeth in combination with intraoral scanning may facilitate rapid and high precision mandibular kinematics measurement in the clinical setting. The findings of this review will guide selection and application of mandibular and TMJ kinematic measurement for both clinical and research applications.

Good margin integrity with a tight seal of the adhesive interface is considered one of the key factors for the clinical success of composite restorations. This study investigated the effect of enamel etching with phosphoric acid on the margin integrity of self-etch bonded composite restorations in demineralized enamel. Crowns of bovine incisors were assigned into 14 groups (n = 10 per group) of which ten groups (groups 1–5 and 8–12) were demineralized (21 days, acid buffer, pH 4.95) to create artificial carious lesions. Standardized Class V cavities were prepared in all specimens. Demineralized groups were either etched with phosphoric acid for 10, 30, 60, or 120 s (groups 2–5 and 9–12), or no etching was performed (groups 1 and 8). The non-demineralized (sound) groups were etched for 10 s (groups 7 and 14) or remained non-etched (groups 6 and 13). Resin composite restorations were then placed using either a one-step (iBond Self Etch, groups 1–7) or two-step self-etch adhesive (Clearfil SE Bond, groups 8–14). Margin integrity of the restorations was assessed after thermocycling (5000×, 5–55 °C) using scanning electron microscopy, and the percentage of continuous margins (%CM) was statistically analyzed (α = 0.05). Phosphoric acid etching significantly increased %CM in both demineralized and sound enamel. For iBond Self Etch, a significant increase in %CM in demineralized enamel was observed with increased etching times. All etched groups treated with Clearfil SE Bond and those etched for 60 or 120 s and treated with iBond Self Etch showed similar %CM in demineralized enamel as in etched sound enamel, and significantly higher %CM than in non-etched sound enamel. In conclusion, enamel etching with phosphoric acid improves margin integrity of composite restorations in demineralized enamel when bonded with the examined adhesives.

Caries development is associated with shifts in the oral biofilm microbiota and primarily linked to frequent simple carbohydrate consumption. Different nutritional ingredients can either promote or prevent caries development. To investigate the effects of selected ingredients on the oral biofilm microbiota in situ, 11 study participants underwent 3-month-long dietary phases with intake of a regular diet (PI), additional frequent sucrose (PII), milk and yoghurt (PIII), and a diet rich in dietary fiber (PIV) and then returned to their regular diet (PV). Oral biofilm was sampled and analyzed applying 16S rRNA Illumina MiSeq sequencing. Additionally, the effect on the enamel was analyzed by measuring enamel surface roughness with laser scanning microscopy. The beta-diversity results showed that the microbiota in all the following phases differed significantly from PI and that the microbial community in PII was significantly different from all other phases. The abundance of the genus Streptococcus fluctuated over the course of the five phases, with a significant increase in PII (P = 0.01), decreasing in PIII and PIV (PIII and PIV versus PII: P < 0.00001) and increasing again toward PV. Other taxa showed various fluctuations of their abundances, with PV returning approximately to the levels of PI. In conclusion, while elevated sucrose consumption favored caries-promoting non-mutans streptococci, frequent milk and yoghurt intake caused a significant decrease in the abundance of these microbial taxa and in addition reduced enamel surface roughness. These results indicate that modulations of the oral biofilm microbiota can be attained even in adults through dietary changes and corresponding recommendations can be made for the prevention of caries development.IMPORTANCE Caries affects a large proportion of the population worldwide, resulting in high treatment costs. Its etiology can be ascribed to shifts of the microbiota in dental biofilms primarily driven by dietary factors. It is unclear how diet affects the microbial community of plaque biofilm in situ and whether it can be modulated to help prevent caries development. To address these issues, we analyzed changes of the in situ plaque microbiota following 3-month-long dietary changes involving elevated sucrose, dairy, and dietary fiber consumption over a period of 15 months. Applying high-throughput sequencing, we found non-mutans streptococci, a taxonomic group involved in the beginning stages toward microbial dysbiosis, in decreased abundance with elevated dairy and dietary fiber intake. Through analysis of the enamel surface roughness, these effects were confirmed. Therefore, correspondent dietary measures can be recommended for children as well as adults for caries prevention.

Previous work has shown that partial replacement of reinforcing fillers with unsilanized silica particles can diminish polymerization shrinkage stress of dental resin composites. The aim of the present study was to investigate whether such an effect can be attained by using unsilanized bioactive glass (BG). Incorporating BG fillers into resin composites is interesting due to their potential for exerting caries-preventive effects. Experimental light-curable composites with a total filler load of 77 wt% were prepared. Reinforcing fillers were partially replaced with 0–60 wt% of BG 45S5 and an experimental low-sodium fluoride-containing BG. The following properties were investigated: linear shrinkage, degree of conversion, shrinkage stress, maximum shrinkage stress rate, and time to achieve maximum shrinkage stress rate. The diminishing effect of BG 45S5 on shrinkage stress was mediated by a decrease in degree of conversion caused by this BG type. In contrast, as the degree of conversion remained unaffected by the experimental BG, the resulting shrinkage behaviour was governed by the effect of varying amounts of silanized and unsilanized fillers on material’s viscoelastic properties. The replacement of silanized reinforcing fillers with unsilanized BG did not reduce polymerization shrinkage stress unless the reduction was attained indirectly through a diminished degree of conversion., Scientific Reports, 10 (1), ISSN:2045-2322

Oral health is maintained by a healthy microbiome, which can be monitored by state-of-the art diagnostics. Therefore, this study evaluated the presence and quantity of ten oral disease-associated taxa (P. gingivalis, T. forsythia, T. denticola, F. nucleatum, C. rectus, P. intermedia, A. actinomycetemcomitans, S. mutans, S. sobrinus, oral associated Lactobacilli) in saliva and their clinical status association in 214 individuals. Upon clinical examination, study subjects were grouped into healthy, caries and periodontitis and their saliva was collected. A highly specific point-of-care compatible dual color qPCR assay was developed and used to study the above-mentioned bacteria of interest in the collected saliva. Assay performance was compared to a commercially available microbial reference test. Eight out of ten taxa that were investigated during this study were strong discriminators between the periodontitis and healthy groups: C. rectus, T. forsythia, P. gingivalis, S. mutans, F. nucleatum, T. denticola, P. intermedia and oral Lactobacilli (p &lt, 0.05). Significant differentiation between the periodontitis and caries group microbiome was only shown for S. mutans (p &lt, 0.05). A clear distinction between oral health and disease was enabled by the analysis of quantitative qPCR data of target taxa levels in saliva.

Background To assess the changes of implant surfaces of different roughness after instrumentation with ultrasonic-driven scaler tips of different materials. Methods Experiments were performed on two moderately rough surfaces (I—Inicell® and II—SLA®), one surface without pre-treatment (III) and one smooth machined surface (IV). Scaler tips made of steel (A), PEEK (B), titanium (C), carbon (D) and resin (E) were used for instrumentation with a standardized pressure of 100 g for ten seconds and under continuous automatic motion. Each combination of scaler tip and implant surface was performed three times on 8 titanium discs. After instrumentation roughness was assessed by profilometry, morphological changes were assessed by scanning electron microscopy, and element distribution on the utmost surface by energy dispersive X-ray spectroscopy. Results The surface roughness of discs I and II were significantly reduced by instrumentation with all tips except E. For disc III and IV roughness was enhanced by tip A and C and, only for IV, by tip D. Instrumentation with tips B, D and E left extensive residuals on surface I, II and III. The element analysis of these deposits proved consistent with the elemental composition of the respective tip materials. Conclusion All ultrasonic instruments led to microscopic alterations of all types of implants surfaces assessed in the present study. The least change of implant surfaces might result from resin or carbon tips on machined surfaces.

Electronic and mobile health (eHealth/mHealth) are rapidly growing areas in medicine and digital technologies are gaining importance. In dentistry, digitalization is also an emerging topic, whereby more and more applications are being offered. As an example, using real-time feedback, digital application software (an app) was designed to help users brush their teeth more accurately. However, there is no data on the effectiveness and haptic of such apps. Therefore, a single-blinded, randomized controlled clinical trial was designed: twenty volunteers received an electric toothbrush with an associated app to assess whether the app-assisted toothbrushing is better than without. After a short period of familiarization with the electric toothbrush, plaque index (O&lsquo, Leary et al. 1972) was recorded and subjects were assigned to the test (with app, n = 10) or the control group (no app, n = 10). At the end of the 2-week pilot study period, plaque was again assessed and participants in the test group completed a questionnaire about the app&rsquo, s user-friendliness. Statistical analysis revealed no significant differences between the test and control groups. The plaque index improved on average by 8.5% points in the test and 4.7% points in the control group. Fifty percent of the test group participants were of the opinion that they had achieved better cleaning results and would recommend the app to others, although the app contributed only marginally to increased plaque removal. However, such apps may nevertheless be helpful as motivational tools, especially when tracking and monitoring cleaning data. Therefore, more development and research on this topic is indicated.

In view of increasing antibiotic resistance, antimicrobial photodynamic therapy (aPDT) is an alternative treatment method used to eradicate the microbial community of oral biofilms that can be responsible for different oral infections. In order to investigate changes in the microbial composition after application of aPDT with visible light and water-filtered infrared A (VIS+wIRA) in combination with indocyanine green (ICG), oral microorganisms of the initial and mature biofilm were evaluated by mass spectrometry (MALDI-TOF-MS). To determine surviving microorganisms using MALDI-TOF-MS, an in situ biofilm was irradiated with VIS+wIRA for five minutes in the presence of ICG (300 and 450 &micro, g/mL, respectively). Treatment with chlorhexidine (0.2%) served as positive control. Identified microorganisms of the initial biofilm treated with ICG showed a clear reduction in diversity. The microbial composition of the mature oral biofilm also showed changes after the implementation of aPDT, which mainly resulted in a shift in the percentage of bacterial species. The resulting destruction of the microbial balance within the oral biofilm by aPDT using VIS+wIRA and ICG can be seen as an advantageous supplementary approach in the adjunctive treatment of periodontitis and peri-implantitis.

In vitro studies investigating the mechanical properties of dental reconstructions use various materials to replicate prepared teeth. However, no uniform recommendation exists as to which material is most suitable for standardized testing. The purpose of this study was to identify a material that resembles human dentin in fracture load tests. Sixteen human teeth were scanned with an intraoral scanner to obtain copies of the original crown morphology and were then prepared for crowns. Replica dies of the prepared teeth including the root morphology were fabricated with a Computer-aided design and computer-aided manufacturing (CAD/CAM) system and divided into four groups: (A) reinforced composite (RC), (B) human dentin (HD), (C) polymethyl methacrylate (PM), and (D) hybrid ceramic (HC). Sixty-four feldspar ceramic crowns were designed with the biocopy mode, fabricated with a CAD/CAM system, luted on the dies, and then with the roots embedded in polymethyl methacrylate. Care was taken to position all specimens of the same morphology identically. Thermo-mechanical load cycling was performed in a chewing simulator followed by fractural loading of the crowns. A mixed effect linear model was fitted to the data, and pairwise contrasts were estimated on the marginal means and corrected for multiple testing according to Tukey (&alpha, = 0.05). The means for fracture load (N) were 2435 N (95% CI (2162, 2709)) for hybrid ceramic, 1838 N (95% CI (1565, 2112)) for reinforced composite, 1670 N (95% CI (1396, 1943)) for human tooth and 1142 N (95% CI (868, 1415)) for polymethyl methacrylate abutment materials. Post-hoc pairwise contrasts revealed a statistically significant (p &lt, 0.05) difference among all groups except for reinforced composite and human dentin (p = 0.76). The results indicate that the mechanical properties of abutment dies play a significant role for a possible substitution of natural teeth in in vitro studies.

This in vitro study examined the margin integrity of sculptable and flowable bulk-fill resin composites in Class II cavities of primary molars. Standardized Class II cavities were prepared in human primary molars and restored with the following resin composite materials after application of a universal adhesive: a sculptable bulk-fill composite (Tetric EvoCeram Bulk Fill (TEC) or Admira Fusion x-tra (AFX)), a flowable bulk-fill composite (Venus Bulk Fill (VBF) or SDR), or a conventional composite (Filtek Supreme XTE (FS)). The bulk-fill materials were applied in 4 mm layers, while the conventional composite was applied in either 2 mm (FS2, positive control) or 4 mm layers (FS4, negative control). The specimens were exposed to thermo-mechanical loading (TML) in a computer-controlled masticator. A quantitative margin analysis was performed both before and after TML using scanning electron microscopy, and the percentage of continuous margins (margin integrity) was statistically analyzed (α = 0.05). All composites showed a significant decline in margin integrity after TML. AFX exhibited the significantly highest margin integrity of all materials after TML (97.5 ± 2.3%), followed by FS2 (79.2 ± 10.8%), TEC (73.0 ± 9.1%), and FS4 (71.3 ± 14.6%). SDR (43.6 ± 22.3%) and VBF (25.0 ± 8.5%) revealed the lowest margin integrity. In conclusion, the tested sculptable bulk-fill materials show similar or better margin integrity in primary molars than the conventional resin composite placed in 2 mm increments.

The aim of this study was to evaluate the effect of photoactivated chemotherapy (PACT) on Enterococcus faecalis (E. faecalis) biofilms in root canals using an 90% isopropanol (IPA)-based photosensitizer and removing excess photosensitizer before light incubation. Three hundred and seven extracted human teeth with one root canal were infected with E. faecalis for 72 h and treated in groups: IPA irrigation, PACT, PACT and final rinse with IPA, PACT with photosensitizer removal using either 0.9% NaCl solution or sterile paper points or both, PACT using IPA-based photosensitizer with and without a final rinse of IPA. Root canals were sampled using sterile paper points and dentin chips collected from the root canal walls. Additionally, SEM (Scanning Electron Microscopy) images of the specimens were taken to evaluate the root canal walls for residue bacterial contamination. In all antimicrobial treatment groups treatments E. faecalis counts were significantly reduced in the root canals. Using IPA-based photosensitizer the antimicrobial effect of PACT was significantly enhanced. Irrigation with IPA alone or after PACT significantly increased the antimicrobial effect compared to PACT alone. The collected dentin chips revealed the highest amount of culture negative root canals (10%) after PACT using IPA-based photosensitizer. In the other groups, the culture negative samples ranged from only 0&ndash, 2 specimens of 30 specimens. REM images show remaining E. faecalis cells on the root canal wall and inside dentin tubules. Using IPA-based photosensitizer significantly enhanced the antimicrobial effect of PACT against E. faecalis in the root canals.

Objectives This in vitro study aimed to analyze the anti-inflammatory and wound healing potential of green tea extract (GTE) in human gingival epithelial keratinocytes (HGEK) treated with lipopolysaccharides (LPS). Materials and methods A cell viability assay was conducted using MTT to determine nontoxic levels of GTE on immortalized HGEK. Cells were concomitantly treated with LPS (1 μg/ml) and GTE (1 mg/ml, 2.5 mg/ml, 5 mg/ml, and 10 mg/ml) to assess inflammation. Gene expression levels of inflammatory markers IL-β1, IL-6, and TNFα were measured by RT-PCR and their protein production was assessed by ELISA. The scratch wound healing assay was used to investigate the effects of different concentrations of GTE on cell migration. We also explored the effect of GTE on the induction of the Nrf2/HO-1 pathway in the cells with or without LPS. Results GTE at concentrations of 2.5 mg/ml, 5 mg/ml, and 10 mg/ml significantly enhanced cell viability (p < 0.05). And IL-β1, IL-6, and TNFα gene expression presented up to 10-fold decrease compared with LPS-treated cells, which was also similarly found on the protein levels. At the same concentrations, cell migration increased. Conclusions The mechanism results showed that GTE produced the anti-inflammatory response by activating the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway and increasing the level of anti-oxidant protein heme oxygenase-1 (HO-1). Clinical relevance GTE may be potentially used as oral rinse anti-inflammatory drug for treatment and prevention of oral inflammatory diseases, which is shown here by the ability to reduce the inflammation and increase in cell migration in a dose-dependent manner.