Search

Hairy root induction in Plantago lanceolata was optimized to take advantage of transformed root cultures. The highest frequency of transformation was achieved using leaf explant, A4 strain, pre-cultivation of explant, 150 µM Acetosyringone, 5 min inoculation, half-strength Murashige and Skoog basal medium as co-cultivation, and half-strength Gamborg′s basal medium as a selective medium with 3% sucrose. Among the studied compound encompassing gallic acid, catalpol and apigenin, only the production of gallic acid in hairy roots was affected by 20 mg L−1 AgNO3 and 100 mg L−1 chitosan at 24 hr which yielded 7.63, 4.76-fold increase in its content, respectively. The methanolic extracts of hairy roots elicited by 20 mg L−1 AgNO3 exhibited anti-bacterial activity (MIC and MBC = 25 mg mL−1) against Klebsiella pneumoniae, Proteus vulgaris and Salmonella typhi and anti-bacterial potential of non-elicited hairy roots of P. lanceolata (MIC = 25 mg mL−1 and MBC = 35 mg mL−1) were more active against Klebsiella pneumoniae and P. vulgaris than other bacteria. The methanolic extracts of the P. lanceolata hairy roots demonstrated significant cytotoxic activity on colorectal carcinoma cell line (SW-480) with IC50 = 250.65 ± 6.8 µg mL−1 in comparison to human embryonic kidney (HEK-293) with IC50 = 5263.65 ± 4.6 µg mL−1. Plantago lanceolata hairy roots showed important biological activity explaining its role in traditional medicine. [ABSTRACT FROM AUTHOR]

In this project, Calcium ferrite/polyvinyl alcohol (CaFe2O4@PVA) nanocarriers were prepared by a thermal-treatment method at three different temperatures (773, 823 and 923 K). The nanocarriers were used as drug delivery systems (DDS) to deliver curcumin (CUR) and were utilized as a new structure for photo dynamic therapy (PDT). Drug loading and release study of CUR were performed and it was observed that nanocarriers showed a pH dependent drug release behavior. MTT assay, Hemolysis assay and lethal dose test were applied to determine the cytotoxicity of nanocarriers. These tests indicated that synthesized nanocarriers can be considered as nontoxic. Also, the photodynamic therapy experiments were performed by two groups: one group of cells were treated by different concentrations of nanocarriers without light and the other group were exposed to light. Then, the efficacy of PDT was determined by MTT and it was revealed that whenever nanocarriers were exposed to light the cytotoxicity was significantly high. Therefore, it was revealed that these nanocarriers are suitable to be utilized as a drug delivery systems and photo dynamic therapy agent. [ABSTRACT FROM AUTHOR]

In The present project, a variety of MnFe2O4 (Mn) and Cr2Fe6O12 (Cr)-based nanocarriers (NCs) were synthesized as photosensitizer and NCs for delivery of chemotherapeutic curcumin (CUR) and provide a new structure for Photodynamic Therapy (PDT). For determining efficiency of NCs release study, MTT assay, lethal dose test and hemolysis assay were carried out. The release study showed the release of CUR from NCs was pH-dependent, but, every NCs had its own behavior for releasing the drug. The data acquired from the release study showed the CUR release from Mn can reach to over 90% at acidic media instead of 41% at neutral media. However, the CUR released from Cr were approximately equal as Cr had equal zeta potential at both media. Hemolysis activity and lethal dose test displayed the cytotoxicity of NCs was neglectable at both in vitro and in vivo study. Also, the results of anti-cancer activity assay (MTT assay) showed that both of Cr and Mn NCs are suitable systems for PDT. Therefore, the results demonstrated that Mn is suitable NCs for PDT and anticancer drugs delivery of therapeutic drugs. [ABSTRACT FROM AUTHOR]

Statins are widely used for the treatment of hypercholesterolemia. However, their inhibitory action on HMG-CoA reductase also results in the depletion of intermediate biosynthetic products, which importantly contribute to cell proliferation. The aim of the present study was to compare the effects of the individual commercially available statins on investigational breast cancer. Thus, in this study, biodegradable polymeric micelles as carrier of statins were prepared using biodegradable copolymers (PCL-PEG-PCL). These nanoparticles were prepared with two statins (atorvastatin and rosuvastatin) and drug loading, release, kinetic release, and anti-cancer activity of these drugs were studied. The triblock copolymer PCL-PEG-PCL was synthesized by a ring opening polymerization of e-caprolactone in the presence of PEG as the initiator and Sn(oct)2 as the catalyst. The synthesized copolymers and nanoparticles were characterized by FTIR, HNMR, GPC, DLS, and AFM analyses. The drug loading and release of drugs were studied by UV-Vis. Additionally, MTT assays on HFF-2 cell lines were performed for determination of biocompatibility of micelles. Finally, the anticancer activity of micelles was studied on MCF-7 breast cancer cell lines. The results showed that the average diameter of nanoparticles was less than 45 nm. The loading capacity of atorvastatin and rosuvastatin was 20.0 ± 1.01% and 13.21 ± 1.18%, respectively, and encapsulation efficiency of atorvastatin and rosuvastatin was 88.19 ± 1.11% and 69.32 ± 0.23%, respectively. The results showed strong and dose-dependent inhibition of cell (MCF-7line) growth by the nanoparticles compared with statins. The result of cell viability assay on the MCF-7 cell line verified that the bare nanoparticles showed little inherent cytotoxicity whereas the statins-loaded nanoparticles were cytotoxic. [ABSTRACT FROM AUTHOR]

In this study, we designed a polymersome system for the controlled release of methotrexate (MTX) as an anticancer drug with the objective of improving the loading efficiency of the drug in polymersomes as well as achievement of an efficient control on the release rate of drug from nanocarriers. We synthesized mono methoxy poly(ethylene glycol)-poly(e-caprolactone) (mPEG-PCL) diblock copolymers. The structure of the copolymers was characterized by proton nuclear magnetic resonance spectroscopy (1H NMR), Fourier transform infrared spectroscopy (FT-IR), and differential scanning calorimetry (DSC) techniques. MTX was encapsulated within nanoparticles (NPs) through multiple emulsion method. The resulting NPs were characterized further by various techniques such as atomic force microscopy (AFM) and dynamic light scattering (DLS). Next, the various kinetic equations were fitted to the release data of MTX from MTX-loaded mPEG-PCL polymersomes. The results showed that the zeta potential of MTX-loaded mPEG-PCL polymersomes was about -5.49 mV and the average size was 49.18 nm. MTX was encapsulated into polymersomes loading capacity of 12 ± 0.09% and encapsulation efficiency of 45.5 ± 0.41%. The metabolic activity assays of void of MTX, mPEG-PCL polymersomes, and MTX-loaded mPEG-PCL polymersomes were compared to each other by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay of the treated MCF-7 cell lines. It can be concluded that application of NPs is a better and more effective strategy for controlled and slow release of MTX in the treatment of cancer. [ABSTRACT FROM AUTHOR]

In this study, drug delivery system of gliclazide, a poorly soluble drug, was developed and evaluated in vitro and in vivo. We synthesized five series of mPEG-PCL di block copolymers. The structure of the copolymers was characterized by 1H-NMR, Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and gel permeation chromatography (GPC) techniques. In this study, gliclazide was encapsulated within micelles through a single-step nano-precipitation method, leading to formation of gliclazide/mPEG-PCL micelles. The resulting micelles were characterized further by various techniques such as DLS and AFM. The serum glucose lowering effect of gliclazide micelles was studied in streptozotocin-diabetic rats and were compared with the gliclazide treated rats. The results showed that the zeta potential of micelles was about −14.9 mV and the average size was 83.12 nm. Gliclazide was encapsulated into mPEG-PCL micelles with loading capacity of 21.05 ± 0.14% and entrapment efficiency of 94.11 ± 0.12%. In vivo testing of the gliclazide micelles in diabetic rats demonstrated a significant antidiabetic effect of gliclazide micelles after the 7 day that lasted for 21 days when compared with gliclazide powder. The results suggest that gliclazide micelles are a valuable system for the sustained delivery of gliclazide. [ABSTRACT FROM AUTHOR]

Purpose: Artemisinin (ART) has anti-inflammatory, antimicrobial, antioxidant, anti-amyloid, and anti-malarial effects, but its application is limited due to its low water solubility and poor oral bioavailability. In this study, the bioavailability, water solubility, and anti-plasmodial property of ART were improved by PCL-PEG-PCL tri-block copolymers. Methods: The structure of the copolymers was characterized by 1H NMR, FT-IR, DSC, and GPC techniques. ART was encapsulated within micelles by a single-step nano-precipitation method, leading to the formation of ART-loaded PCL-PEG-PCL micelles. The obtained micelles were characterized by dynamic light scattering (DLS) and atomic force microscopy (AFM). The in vivo anti-plasmodial activity of ART-loaded micelles was measured against Plasmodium berghei infected Swiss albino mice. Results: The results showed that the zeta potential of ART-loaded micelles was about −8.37 mV and the average size was 91.87 nm. ART was encapsulated into PCL-PEG-PCL micelles with a loading capacity of 19.33 ± 0.015% and encapsulation efficacy of 87.21 ± 3.32%. In vivo anti-plasmodial results against P. berghei showed that multiple injections of ART-loaded micelles could prolong the circulation time and increase the therapeutic efficacy of ART. Conclusion: These results suggested that PCL-PEG-PCL micelles would be a potential carrier for ART for the treatment of malaria. [ABSTRACT FROM AUTHOR]

Triblock poly(ε-caprolactone) - poly(ethylene glycol) - poly(ε-caprolactone) (PCL-PEG-PCL) copolymers were synthesized and used to prepare polymersomes for controlled release of lovastatin (LOV) as hydrophobic drug. Biodegradable PCL-PEG-PCL copolymer nanoparticles were prepared and the drug loading, release, release kinetics, and anti-cancer activity of these drugs was investigated. The PCL-PEG-PCL copolymer was synthesized by ring-opening polymerization of e-caprolactone in the presence of mPEG as the initiator and Sn(Oct)2 as the catalyst. The synthesized copolymers and nanoparticles were characterized by FTIR, 1H NMR, DLS, and AFM techniques. The efficiency of drug loading and release from nanoparticles in vitro was studied by UV-Vis spectrophotometry. Additionally, MTT assays on HFF-2 cell lines were performed for determining the biocompatibility of polymersomes. Finally, the antiproliferative activity of polymersomes was examined on MCF-7 breast cancer cell line. The obtained results showed that the average diameter of nanoparticles was less than 57 nm. The loading capacity and encapsulation efficiency of LOV was 16.1 ± 0.36% and 59.01 ± 0.78%, respectively. In vitro release study showed that the release rate of polymersomes depended on pH and was higher at lower pH than under neutral condition. The result of cell viability assay on the MCF-7 line proved that bare nanoparticles showed little inherent cytotoxicity whereas the LOV-loaded nanoparticles were cytotoxic. [ABSTRACT FROM AUTHOR]