Search

Direct regeneration is an effective strategy of spent lithium iron phosphate (S-LFP), with the principal aspect being the selection of the lithium source and reductant. Here, assisted with a thermodynamically favourable reaction involving a bifunctional organic lithium salt (lithium citrate), the single-step regeneration of S-LFP is successfully achieved. The structure and composition of the regenerated LFP are significantly restored, demonstrating excellent electrochemical performance (142.7 mA h g−1) with no degradation after 200 cycles. [ABSTRACT FROM AUTHOR]

Garnet solid‐state electrolyte Li6.5La3Zr1.5Ta0.5O12 (LLZTO) holds significant promise. However, the practical utilization has been seriously impeded by the poor contact of Li|garnet and electron leakage. Herein, one new type of garnet‐based solid‐state battery is proposed with high performance through the disparity in interfacial energy, induced by the reaction between trace fluorinated carbon dots (FCDs) and Li. The work of adhesion of Li|garnet is increased by the acquired Li‐FCD composite, which facilitates an intimate Li|garnet interface with the promoted uniform Li+ deposition, revealed by density functional theory (DFT) calculations. It is further validated that a concentrated C−Li2O−LiF component at the Li|garnet interface is spontaneously constructed, due to the significant disparity in interfacial energy between C−Li2O−LiF|LLZTO and C−Li2O−LiF|Li. Furthermore, The electron transport and Li dendrites penetration are effectively hindered by the formed Li2O and LiF. The Li‐FCD|LLZTO|Li‐FCD symmetrical cells demonstrate stable cycling performance for over 3000 hours at 0.3 mA cm−2 and 800 hours at 0.5 mA cm−2. Furthermore, the LFP|garnet|Li‐FCD full cell exhibits remarkable cycling performance (91.6 % capacity retention after 500 cycles at 1 C). Our research has revealed a novel approach to establish a dendrite‐free Li|garnet interface, laying the groundwork for future advancements in garnet‐based solid‐state batteries. [ABSTRACT FROM AUTHOR]

Garnet solid state electrolytes (SSEs) have emerged as propitious candidates for solid‐state batteries (SSBs) with exceptional ionic conductivity and excellent (electro)chemical stability. However, the Li|garnet interface contact deterioration still remains a major challenge resulting in Li dendrite propagation. Herein, a method is proposed to strengthen the adhesion of garnet SSE and Li by incorporating Sr3N2 into the Li metal. Density functional theory (DFT) calculations reveal that the interfacial formation energy of Li|garnet is decreased by the obtained Li‐Sr‐N (LSN) composite, which can enable a shift from poor contact to intimate bonding at the Li|garnet interface and a homogenous Li+ flux as well as electric field distribution. Simultaneously, the produced Li3N and LiSrN, which are known for their strong Li adsorption affinity and rapid Li+ transfer kinetics, actively govern the Li plating process. Thereby this rational design brings a notable reduction in interfacial impedance (4.5 Ω cm2), along with the increased critical current density (1.3 mA cm−2) and enhanced cycle stability (1200 h at 0.3 mA cm−2). Furthermore, The LFP|garnet|LSN full cell has demonstrated remarkable cycling performance (95.9% capacity retention after 200 cycles at 1 C) and favorable rate capability (150.2 mAh g−1 at 0.1 C and 134.9 mAh g−1 at 1 C). The research provides a new sight into lithium modification that can restrain Li|garnet interface deterioration and lay the groundwork for future advancements in high‐performance garnet‐ based SSBs. [ABSTRACT FROM AUTHOR]

Fast‐charging ability of sodium‐ion batteries (SIBs) is mainly determined by a highly effective redox reaction rate. However, traditional metal@carbon composites rarely achieve atom‐level dispersion at high density, resulting in poor reaction rates. Herein, supported by the introduction of carbon vacancies, abundant C─S/C─O chemical bonds are successfully established in a carbon carrier. Then, plenty of Sb single atoms (Sb SA/PC) are first anchored with a high loading of 31.4 wt%, achieving a high yield of 210.56 g per batch. Benefiting from dense Sb─O─C/Sb─S─C interfacial chemical bonds, Sb─S2O coordination configurations are firmly confined in the interior of carbon. Surprisingly, the conductivity of Sb SA/PC‐2 is approximately 2.2 × 107 times greater than that of pristine Sb2S3. Consequently, Sb SA/PC‐2 exhibits ultrahigh fast‐charging capability (201.7 mAh g−1 at 20.0 A g−1) and ultralong cycling life (364.4 mAh g−1 at 5.0 A g−1 after 5000 cycles). Theoretical calculations reveal that the fast‐charging capability can be attributed to the low migration barrier and increased number of active sites. Moreover, owing to the structural integrity of Sb single atoms, phase separation is effectively inhibited. This work is anticipated to open an avenue toward designing advanced electrode materials for ultrafast‐charging SIBs. [ABSTRACT FROM AUTHOR]

Mitochondria are essential for a diverse array of biological functions. There is increasing research focus on developing efficient tools for mitochondria-targeted detection and treatment. BODIPY dyes, known for their structural versatility and excellent spectroscopic properties, are being actively explored in this context. Numerous studies have focused on developing innovative BODIPYs that utilize optical signals for imaging mitochondria. This review presents a comprehensive overview of the progress made in this field, aiming to investigate mitochondria-related biological events. It covers key factors such as design strategies, spectroscopic properties, and cytotoxicity, as well as mechanism to facilitate their future application in organelle imaging and targeted therapy. This work is anticipated to provide valuable insights for guiding future development and facilitating further investigation into mitochondria-related biological sensing and phototherapy. [ABSTRACT FROM AUTHOR]

Niobium oxides have fascinated numerous interests for ultrafast sodium‐ion batteries due to their impressive stability, fast pseudocapacitive kinetics, and high safety features. However, the poor intrinsic electronic conductivity and unrevealed mechanisms largely limit their further applications. Here, inspired by density functional theory (DFT) calculations, the introduction of conductor heterostructure (Nb2O5/NbSe2) can largely decrease the bulk phase inserted energy of Na+ from 9.88 to −3.54 eV, as well as promote the delocalization of electron, greatly improving the electrical conductivity of Nb2O5. As expected, the as‐obtained orthorhombic niobium pentoxide (T‐Nb2O5‐x‐NbSe2@C) delivers a high conductivity of 3.69 S cm−1, exhibiting a great improvement of four orders magnitude than that of the parent Nb2O5 (1.87 × 10−4 S cm−1). Impressively, T‐Nb2O5‐x‐NbSe2@C possesses a high reversible capacity of 249 mAh g−1 at 0.1 A g−1, as well as excellent rate performance of 63 mAh g−1 at 5.0 A g−1, nearly twins the capacity of parent porous Nb2O5. Furthermore, the periodic evolutions of the main peaks for targeted electrodes during repeated charging/discharging processes have been further revealed by in situ XRD, demonstrating a highly reversible inserted/extracted storage mechanism of Na+. This work provides a novel method to improve the conductivity of materials by constructing conductor heterojunction. [ABSTRACT FROM AUTHOR]

The utilization rate of active sites in cathode materials for Zn‐based batteries is a key factor determining the reversible capacities. However, a long‐neglected issue of the strong electrostatic repulsions among divalent Zn2+ in hosts inevitably causes the squander of some active sites (i.e. gap sites). Herein, we address this conundrum by unraveling the "gap‐filling" mechanism of multiple charge carriers in aqueous Zn‐MoS2 batteries. The tailored MoS2/(reduced graphene quantum dots) hybrid features an ultra‐large interlayer spacing (2.34 nm), superior electrical conductivity/hydrophilicity, and robust layered structure, demonstrating highly reversible NH4+/Zn2+/H+ co‐insertion/extraction chemistry in the 1 M ZnSO4+0.5 M (NH4)2SO4 aqueous electrolyte. The NH4+ and H+ ions can act as gap fillers to fully utilize the active sites and screen electrostatic interactions to accelerate the Zn2+ diffusion. Thus, unprecedentedly high rate capability (439.5 and 104.3 mAh g−1 at 0.1 and 30 A g−1, respectively) and ultra‐long cycling life (8000 cycles) are achieved. [ABSTRACT FROM AUTHOR]

Aqueous zinc‐ion batteries (ZIBs) are promising candidates for grid‐energy storage due to their safety and cost‐effectiveness. However, the detrimental hydrogen evolution reaction (HER) and dendrite growth on Zn‐metal anodes severely limit their applications. Herein, trace hydrophobic hyamine (HQA, 0.78 mmol L−1) is introduced as an electrolyte additive to improve the electrochemical performance of the Zn anode. Experiments and theoretical calculations revealed that cationic HQA can preferentially adsorb onto the anode surface to inhibit the HER and promote the uniform distribution of Zn ions by forming a water‐lean electric double layer (EDL). Moreover, the oriented adsorption of HQA induced exposure of the Zn (002) plane and prevented dendrite growth. Therefore, the symmetric cells using the HQA‐containing electrolyte exhibited stable cycle performance for more than 1600 h. Even at a high‐density current of 5 mA cm−2, it has a high cumulative capacity of 3250 mAh cm−2. It exhibited an excellent deep‐discharge performance (80%) with a stable cycle for 175 h. The Zn||NH4V4O10 full cell exhibited a high specific capacity and cycle stability at 4.0 A g−1 due to the excellent reversibility of Zn anode. These results provide a new and low‐cost approach for electrolyte design and EDL optimization of high‐performance zinc‐ion batteries. [ABSTRACT FROM AUTHOR]

The uneven zinc‐ion flux and interfacial contact between the anode and electrolyte trigger malignant dendrites and byproducts, significantly hindering the practical application of zinc‐metal batteries. Herein, a H‐bonded supramolecular organic framework (HSOF) is proposed to help regulate Zn2+ flux and stabilize interfacial chemistry. The self‐assembled supermolecule structures by in‐plane H‐bond networks firmly trap water molecules to assist Zn2+ de‐solvation and block interfacial corrosion. The abundant polar groups provide strong guidance for Zn2+ distribution, ensuring homogeneous, and rapid ion transport‐deposition kinetics. Meanwhile, the π–π stacked space‐layout structure affords preferred Zn(002) plane stacking for smooth and flat growth. Benefiting from these advantages, the HSOFs are employed on Zn surface for interfacial adjustment and on separator decoration for spatial manipulation, successfully realizing an overall "interface‐space" dual‐regulation effect. It delivers over 3000 h for the HSOF@Zn anode in symmetric cell and up to 5000 h for HSOF‐decorated separator in Zn||Zn symmetric cell, respectively. The HSOF@Zn||V2O5 full cell with the HSOF‐decorated separator demonstrates enhanced capacity retention of 92.7% after 2500 cycles at 5 A g−1. The full cell can be easily scaled up into a pouch cell, which still has a capacity retention rate of 94% after 1000 cycles. [ABSTRACT FROM AUTHOR]

Antimony（Sb） has high theoretical specific capacity and moderate reaction potential, but poor cycling stability and rate performance caused by large volume expansion and sluggish reaction kinetics limit its development in alkali‐ion batteries. The construction of carbon/Sb composites can solve this problem, but the traditional single carbon composite and poor Sb/carbon interface have limited promotion. Here, under the guidance of theoretical calculations, a strategy of hierarchical double carbon composite is proposed to enhance the performance of Sb anode, and systematically reveal the lithium/sodium ions (Li+/Na+) storage mechanism of Sb in complex composite system. Sb nanoparticles (Sb NPs) are encapsulated in carbon sphere matrix with strong interfacial chemical bond to form the first level composite material, and then the highly conductive and mechanically strong graphene is used as a three‐dimensional skeleton network to connect the first level composite to form the second level composite material. The hierarchical double carbon/Sb composite exhibits excellent rate (228 mAh g−1 @ 20 A g−1) and long cycling performance (373.7 mAh g−1 @ 2 A g−1 after 2200 cycles, capacity retention of 93.1%). This work may expand structural design and interface regulation of Sb/C composites and providing theoretical guidance for metal anodes development. [ABSTRACT FROM AUTHOR]