Search

Microplastics (MPs) are considered pollutants of emerging concern. In rivers, MPs (=5 mm) are transported by currents and deposited in lakes, reservoirs, estuaries, and oceans. In Mexico, MPs in freshwater ecosystems have been scarcely studied. This work aimed to determine the presence of MPs in rivers of the Sierra Gorda Biosphere Reserve (SGBR). Samples of surface water and sediment collected from the Escanela, Jalpan, Ayutla, and Santa María rivers were processed. MPs in water were extracted by direct filtration using nitrocellulose filters with a 1.2 µm pore size; MPs in sediments were extracted by density suspension using a ZnCl2 solution (p ≈ 1.5 g/cm3). The surface of MPs was examined using SEM-EDX, and spectra of trace elements deposited on the MPs were obtained; additionally, MP polymers were characterized with FTIR. Fibers were the most abundant MP forms in both matrices. Up to 110.87 items L-1 were detected in water and 175 items kg-1 (dry weight) in sediments. Surface wear of MPs was observed, and trace elements were detected, including Al, Fe, Cr, Si, and Zn, among others. The polymers identified in MP samples were polyethylene terephthalate, polyester, polypropylene, high-density polyethylene, polyamide, and polystyrene. The test results revealed the presence of MPs with trace metals on their surface in the freshwater ecosystems of the SGBR, which may be related to mining operations in the study area, changes in land use, wastewater discharges, atmospheric transport, and dry and wet deposition. These findings demonstrated the ubiquity of these pollutants and their presence even in areas intended for conservation. [ABSTRACT FROM AUTHOR]

Microplastics are an emerging anthropogenic pollutant risk with a significant body of research dedicated to understanding the implications further. To generate the databases required to characterize the impact of microplastics on our environment, and improve recovery and recycling of current plastic materials, we need rapid, in-line characterization that can distinguish individual polymer types. Here, autofluorescence spectroscopy was investigated as an alternative characterization method to the current leading techniques based on vibrational spectroscopy. It was confirmed that the autofluorescence of seven common textile polymers (acrylic, polyester, nylon, polyethylene, polypropylene, cellulose/cotton, wool) arose due to the cluster-triggered emission phenomenon. Both simulated polymer aging via photooxidation and dyeing of the polymers were found to affect the resultant autofluorescence spectra. A total of 1485 spectra from 39 unique sample groups (polymer type, colour, and degree of photooxidation) were analysed via machine learning (k-means cluster analysis). Correct identification of the polymer type was achieved in 71% of the cases from only eight input values (normalized intensity values at three autofluorescence emission wavelengths, the total autofluorescence emission intensity, the sample RGB colour values, and the sample shape). This represents a significant step towards automated polymer identification at the sub-second time scales required for the in-line characterization of microplastics. [ABSTRACT FROM AUTHOR]

Nanorobots are being received with a great attention for their move‐sense‐and‐act capabilities that often originate from catalytic decomposition of fuels. In the past decade, single‐atom engineering has demonstrated exceptional efficiency in catalysis, energy‐related technologies, and medicine. Here, a novel approach involving point defect engineering and the incorporation of platinum (Pt) single atoms and atomic level species onto the surface of titanium dioxide nanotubes (TiO2‐NT)‐based nanorobots is presented and its impact on the propulsion capabilities of the resulting nanorobots is investigated. The achievement of point defect engineering is realized through the annealing of TiO2‐NT in a hydrogen atmosphere yielding to the point‐defect decorated nanotube (TiO2‐HNT) nanorobots. Subsequently, the atomic level Pt species decorated TiO2 nanotube (TiO2‐SA‐NT) nanorobots are achieved through a wet‐chemical deposition process. Whereas TiO2‐SA‐NT nanorobots showed the highest negative photogravitaxis when irradiated with ultraviolet (UV) light, TiO2‐HNT nanorobots reached the highest velocity calculated in 2D. Both TiO2‐HNT and TiO2‐SA‐NT nanorobots demonstrated a pronounced affinity for microplastics, exhibiting the capability to irreversibly capture them. This pioneering approach utilizing point‐defect and atomic level Pt species nanorobotics is anticipated to pave the way for highly efficient solutions in the remediation of nano‐ and microplastics and related environmental technologies. [ABSTRACT FROM AUTHOR]

Microplastics have been found in freshwater systems, and in turn have been detected in freshwater bivalves. However, there is limited research that defines the toxicity of bicroplastics to native freshwater bivalves that have long been imperiled in North America. Our objective was to determine whether a suite of pristine microplastics has an adverse effect on two early life stages of unionid freshwater mussels. Glochidia of Lampsilis fasciola (a Canadian species at risk) and Lampsilis siliquoidea (widespread across Canada) were individually exposed to spheres of polystyrene (6 and 90 μm), polyethylene (28, 90, and 1000 μm), and cellulose acetate (1000 μm), as well as fibers of polyethylene terephthalate (60 μm). After 24 h, there was no significant decrease in glochidia viability in either species. Juvenile L. siliquoidea mussels were also exposed to spheres of polystyrene (6 and 90 μm) and polyethylene (28 μm), and fibers of polyethylene terephthalate (60 μm) in individual 28‐day subchronic tests followed by a 7‐day depuration period. Burial was assessed weekly, and ingestion of each microplastic was compared in nondepurated and depurated mussels. There was no sustained effect on juvenile burial with any microplastic tested. Ingestion of microplastics was concentration dependent, and depuration occurred for all particles and size ranges tested. The results suggest that pristine microplastics were not acutely toxic to the early life stages of these freshwater mussels, but that the energetic costs associated with particle uptake and depuration, which were not measured in our study, may have an impact on fitness that warrants further investigation. In addition, testing with other shapes and polymers of microplastics typically detected in the environment is recommended. Environ Toxicol Chem 2024;00:1–12. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) contribute to the overall pollution of water sources, affecting not only aquatic ecosystems but also water for human consumption (WHC). Currently, there needs to be a global consensus on safe levels of microplastics in WHC, which will allow regulatory efforts and risk assessments to be carried out. Therefore, this study aims to characterize MP particles in WHC of the Lisbon water supply system (LWSS) and compare two approaches to quantify these particles (length and width of the particles, and the area equivalent diameter (AED) of the particles). The quantification of MP particles was made via micro-FTIR (Fourier Transform Infrared Spectroscopy) on transmission mode after water filtration on 5 µm silicon filters. Thirty-eight WHC samples from the LWSS showed MPs up to 836 MPs/L, with an average value of 196 MPs/L. The most representative polymer was polyethylene (PE, 77.2%). The other eight polymers were also quantified. The length and width of MPs ranged between 84 µm and 41 µm, respectively. The AED of MPs ranged between 24 µm and 405 µm. The MP dimensions of both approaches can differ significantly. [ABSTRACT FROM AUTHOR]

[Display omitted] • Larvae of Hermetia illucens regularly develop on PVC-MPs-supplemented diet. • PVC-MPs are ingested by the larvae and reduced in their size. • Midgut morphology is not affected by PVC-MPs in the larval diet. • PVC-MPs in the larval diet do not affect microbial alpha- and beta-diversity. • PVC-MPs selectively affect the abundances of gut bacterial and fungal taxa. In a world with a population exceeding 8 billion people and continuing to grow, pollution from food and plastic waste is causing long-term issues in ecosystems. Potential solutions may be found by exploiting insect-based bioconversion. In this context, we investigated the impact of polyvinyl chloride microparticles (PVC-MPs) on the development of Hermetia illucens (black soldier fly; BSF) and its midgut bacterial and fungal microbiota. The impact of PVC-MPs was evaluated feeding BSF larvae with a PVC-MPs-supplemented diet. The larvae exposed to different PVC-MPs concentrations (2.5%, 5%, 10% and 20% w/w) developed into adults with no significant increase in pupal mortality. Faster development and smaller pupae were observed when 20% PVC-MPs was provided. The BSF larvae ingest PVC-MPs, resulting in a reduction in MPs size. Larvae exposed to PVC-MPs did not exhibit differences in gut morphology. Regarding the impact of PVC-MPs on the structure of both bacterial and fungal communities, the overall alpha- and beta-diversity did not exhibit significant changes. However, the presence of PVC-MPs significantly affected the relative abundances of Enterobacteriaceae and Paenibacillaceae among the bacteria and of Dipodascaceae and Plectospharellaceae among the fungi (including yeast and filamentous life forms), suggesting that PVC-MP contamination has a taxa-dependent impact. These results indicate that BSF larvae can tolerate PVC-MPs in their diet, supporting the potential use of these insects in organic waste management, even in the presence of high levels of PVC-MP contamination. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) in the air are one of the major concerns due to their possible health risks. In addition, airborne microplastics act as a carrier for several toxic air pollutants and cause carcinogenic, mutagenic and teratogenic effects. Nylon 66 is one of the most abundant MPs in the microenvironments. In this study, we report an optimized method for the quantification of nylon 66 MPs present in the fine particulate matter (PM2.5) using high-performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS). The optimized method exhibited excellent linearity, recovery rates, intraday and interday precision and sensitivity. The optimized method was deployed to carry out a pilot study to measure the mass concentrations of nylon 66 microplastics present in the inhalable fraction of particulate matter collected in a shopping complex. The observed mass concentrations of nylon 66 MPs in this study are in the range from 0.30 ng m−3 to 4.37 ng m−3. This study demonstrates the presence of inhalable fraction of nylon 66 MPs in the indoor environment and their mass concentrations were determined using HPLC-MS/MS. [ABSTRACT FROM AUTHOR]

Biodegradable microplastics (Bio-MPs) are a hot topic in soil research due to their potential to replace conventional microplastics. Biofertilizers are viewed as an alternative to inorganic fertilizers in agriculture due to their potential to enhance crop yields and food safety. The use of both can have direct and indirect effects on rhizosphere microorganisms. However, the influence of the coexistence of "Bio-MPs and biofertilizers" on rhizosphere microbial characteristics remains unclear. We investigated the effects of coexisting biofertilizers and Bio-MPs on the structure, function, and especially the carbon metabolic properties of crop rhizosphere bacteria, using a pot experiment in which polyethylene microplastics (PE-MPs) were used as a reference. The results showed that the existence of both microplastics (MPs) changed the physicochemical properties of the rhizosphere soil. Exposure to MPs also remarkably changed the composition and diversity of rhizosphere bacteria. The network was more complex in the Bio-MPs group. Additionally, metagenomic analyses showed that PE-MPs mainly affected microbial vitamin metabolism. Bio-MPs primarily changed the pathways related to carbon metabolism, such as causing declined carbon fixation/degradation and inhibition of methanogenesis. After partial least squares path model (PLS-PM) analysis, we observed that both materials influenced the rhizosphere environment through the bacterial communities and functions. Despite the degradability of Bio-MPs, our findings confirmed that the coexistence of biofertilizers and Bio-MPs affected the fertility of the rhizosphere. Regardless of the type of plastic, its use in soil requires an objective and scientifically grounded approach. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) in freshwater environments, such as lakes, have become a significant issue in recent years. However, studies on the lakes of the Yunnan Plateau have been limited. To understand the pollution status and sources of MPs in Lake Chenghai (LCH), 36 sampling sites were selected for the surface water and sediment samples. Morphological identification, compositional analysis, abundance measurement, and spatial distribution mapping of the MPs were carried out. We also performed correlation analyses with hydrological parameters and physicochemical indexes of water and sediments. We aimed to uncover the spatial distribution patterns of the MPs in LCH, along with potential sources. Our findings revealed that all samples contained MPs and all of them were fibers. The abundance of MPs ranged from 90 to 770 n/m3 (329.44 rms) in the water and from 10 to 115 n/kg (43.19 rms) in the sediments, with particle sizes of 1-3 mm and less than 1 mm, respectively. Transparent MPs were prevalent, comprising 68% of the MPs found in the water and 63% in the sediments. The primary components of the MPs were polypropylene (PP), polyethylene terephthalate (PET), and man-made fibers (rayon). The spatial distribution showed an increasing concentration of MPs from south to north in the surface water, whereas the opposite trend was found in the sediments. Human activities, prevailing winds, and the river flowing into the lake influenced the spatial distribution pattern of the MPs. The abundance and assemblage characteristics of the MPs were directly correlated with the factors of nitrogen, phosphorus, and particle size in the water and sediments, but the correlation was not significant. The main source of MPs was the production and livelihoods of the neighboring residents, especially the use of fishing gears and nets. Since LCH shows significant pollution from MPs, there is an urgent need to control and manage the watershed in order to reduce the input of MPs in the future. [ABSTRACT FROM AUTHOR]

Microplastics pollution in agricultural soil is increasingly recognized, but the specific situation varies with geography, climate conditions, and farming practices. The karst landscape, a typical geomorphology in China, demands a deeper understanding of microplastics pollution in such areas. This research zeroes in on Guizhou, a province known for its karst formations, by collecting soil samples from the mulched cultivation layer in ten counties and cities. The study employed metallographic microscopy, scanning electron microscopy (SEM-EDS), and Fourier-transform infrared spectroscopy (FT-IR) to analyze the presence and distribution of microplastics. Results show that polyethylene is the predominant component of microplastics in the mulched agricultural soils of Guizhou, primarily existing as irregular fragments in black, transparent, and translucent forms, with diameters of 40 ~ 120 μm and rough surfaces marked by significant erosion. The concentration of microplastics varies from 143.28 to 3,283.46 items/kg, averaging 1,150.60 ± 647.86 items/kg. The majority of particles accounting for 64.79% are sized between 10 ~ 100 μm. A highly significant positive correlation (p < 0.001) is found between mulching duration and microplastics concentration, indicating that prolonged mulching increases microplastics accumulation in farmlands. Additionally, crop type, irrigation method, and soil type also influence microplastics concentration. This study highlights the escalating issue of microplastics pollution in China's karst regions, underscoring the need for attention. [ABSTRACT FROM AUTHOR]

Introduction: Gold nanoparticles (AuNPs) have been developed as treatment materials for various diseases and shown magnificent potential. By contrast to the broad toxicological studies on the single exposure (AuNPs), how the other health risks modulate the toxicological profile of AuNPs remains to be investigated. Plastics are among the most common health risks in daily life due to the broad utilization of plastic products. Therefore, in this study, we aimed to reveal the toxicological effects induced by co-exposure of gold nanorod (AuR) and polystyrene micro- and nano-plastics (hereinafter, referred to as AuRmPS and AuRnPS, respectively) in mice. Methods: Systematic biochemical characterizations were performed to investigate the hepatotoxicity, nephrotoxicity, neurotoxicity, inflammatory responses, alterations in gut microbiota induced by co-exposure, and to analyze the toxicological phenomena from the roles of reactive oxygen species and gut-organ axis. Results: It has been found that hepatotoxicity, nephrotoxicity, neurotoxicity, and inflammation were exacerbated in AuRnPS and AuRmPS, and gut microbiota composition was more severely altered in AuRnPS exposure. These results suggest the necessity of reducing plastics exposure in AuNPs-based therapies. Moreover, protection against the nano-sized plastic particles holds higher priority. Conclusion: These findings will facilitate the explorations of methods to reduce therapeutic toxicity and improve biosafety for specific treatments by referring to the orders of importance in protecting different organs. [ABSTRACT FROM AUTHOR]

Microplastics (MPs), a brand-new class of worldwide environmental pollutant, have received a lot of attention. MPs are consumed by both humans and animals through water, food chain and other ways, which may cause potential health risks. However, the effects of MPs on embryonic development, especially placental function, and its related mechanisms still need to be further studied. We investigated the impact on fetal development and placental physiological function of pregnant mice by consecutive gavages of MPs at 0, 25, 50, 100 mg/kg body weight during gestational days (GDs 0–14). The results showed that continuous exposure to high concentrations of MP significantly reduced daily weight gain and impaired reproductive performance of pregnant mice. In addition, MPs could significantly induce oxidative stress and placental dysfunction in pregnant mice. On the other hand, MPs exposure significantly decreased placental barrier function and induced placental inflammation. Specifically, MPs treatment significantly reduced the expression of tight junction proteins in placentas, accompanied by inflammatory cell infiltration and increased mRNA levels of pro-inflammatory cytokines and chemokines in placentas. Finally, we found that MPs induced placental apoptosis and endoplasmic reticulum (ER) stress through the GRP78/IRE1α/JNK axis, leading to placental dysfunction and decreased reproductive performance in pregnant mice. We revealed for the first time that the effects of MPs on placental dysfunction in pregnant animals. Blocking the targets of MPs mediated ER stress will provide potential therapeutic ideas for the toxic effects of MPs on maternal pregnancy. [ABSTRACT FROM AUTHOR]

Microplastic studies investigating concentrations in water are numerous, but the majority of microplastics settle and are retained in sediment, and higher concentrations are regularly reported in sediments. Thus, MPs accumulation may be more threatening to benthic fish living in sediments than to pelagic fish. The presence, abundance and diversity of microplastics were investigated by collecting samples from two pelagic, European anchovy, and horse mackerel and two benthic fish species, red mullet, and whiting that are popularly consumed in Giresun province of Türkiye, located on the southern coast of the Black Sea. Visual classification and chemical compositions of microplastics was performed using a light microscope and ATR-FTIR spectrophotometry, consecutively. The overall incidence and mean microplastics abundance in sampled fishes were 17 and 1.7 ± 0.18 MP fish−1, respectively. MPs were within the range of 0.026–5 mm in size. In most of the cases, the MP was black in color with 41%. With the rates of 56%, polypropylene was the predominant polymer type. The most dominant MP type was identified as fiber followed by fragments and pellets. The relationship between MP amounts in fish and Fulton condition factor was not strong enough to establish a cause-effect relationship. [ABSTRACT FROM AUTHOR]

We examined the ecological and toxicological implications of the microplastic, Cyanox®53, found in sediments and varnish clams across seven beaches in Burrard Inlet, British Columbia (BC). Using the simulation models embedded within Estimation Programs Interface (EPI) Suite™, the potential persistence, bioaccumulation, and toxicity of Cyanox®53 was assessed to evaluate the risk to varnish clams foraging on sediment containing this contaminant. Moreover, we used a bioenergetic model, based on the blue-listed surf scoter species, to estimate the risk of daily ingestion of Cyanox®53 per body weight in overwintering seabirds. Our findings indicate that varnish clams collected from Burrard Inlet accumulate on average 0.46 particles of Cyanox®53/clam, and based on bioenergetic modeling, results in surf scoters potentially consuming 78 (for males) to 83 (for females) pieces of Cyanox®53 daily from foraged varnish clams. EPI Suite™ predicted Cyanox®53 to be persistent, however, unlikely to bioaccumulate as a "traditional" chemical. Furthermore, the estimation of potential acute and chronic toxicity of Cyanox®53 to aquatic organism surrogates, such as fish, Daphnia magna, and green algae, was inconclusive due to model variability and limitations within EPI Suite™. To fully understand the potential risks of Cyanox®53 further investigation is warranted. [ABSTRACT FROM AUTHOR]

Microplastic pollution has raised significant concerns among scientific communities and society in recent years due to its increase and lesser-known effects on the environment. To improve the knowledge of microplastic pollution in freshwater, we investigated microplastics in Anzali Wetland, a Ramsar site in northern Iran, as well as its nine main entering rivers. The extracted microplastics were characterized via visual identification, SEM–EDX, and μ-Raman methods. Microplastics (size range: 50–5000 μm) were found in all water and sediment samples with concentration of fibrous particles as well as polypropylene and polyethylene polymers. The mean concentration of microplastics in bottom sediment and surface water samples of the wetland was 301 ± 222 particles∙kg−1 d.w. and 235 ± 115 particles∙m−3 (0.23 particles∙L−1), respectively. The microplastic concentration in the central and eastern parts of the wetland was higher than in other areas; however, the mean concentrations revealed homogeneity across the wetland area. Water properties (dissolved oxygen, pH, temperature, electrical conductivity, and salinity in water) did not affect the concentration of microplastic particles, though correlational analysis revealed a strong positive association between microplastic quantity and turbidity. There was a significant positive relationship between microplastic concentration and the percentage of clay in sediment samples. The quantity of microplastics in river water was higher than in wetland water, but the difference between the results was not significant. However, the quantity of microplastics in the river's littoral sediment was higher than in the bottom sediment of the wetland where the difference between the results was significant. Microplastic ecological risk assessment showed high potential ecological risk. The findings underscore the importance of effective management strategies and the implementation of policies to mitigate the negative impact of MP pollution on ecosystems and human health. [ABSTRACT FROM AUTHOR]

The increasing use of contact lenses, artificial tears, and anti-vascular endothelial growth factor (anti-VEGF) drug injections for age-related macular degeneration has heightened the likelihood of eye exposure to microplastic particles. Extensive research has established that microplastic particles can induce oxidative stress on the ocular surface, resulting in damage. However, the impact of these particles on the retina remains unclear. Therefore, this study investigated whether microplastics/nanoplastics (MPs/NPs) cause retinal damage. In vitro human retinal pigment epithelial (RPE) cells were exposed to polystyrene MPs and NPs for 48 h. Assessment of cell viability using WST-8; evaluation of TNF-α and IL-1β expression; observation of cell morphology and particle invasion via TEM; measurement of ROS levels using the DCFDA reagent; and western blot analysis of SOD2, FIS1, Drp1, and LC3B expression were conducted. In vivo experiments involved intravitreal injection of MPs/NPs in rats, followed by retinal H&E staining 24 h later and evaluation of TNF-α and IL-1β expression. Results indicated that exposure to MPs did not significantly alter RPE cell viability, whereas exposure to NPs led to a noticeable decrease. TEM images revealed NPs' penetration into cells, causing increased oxidative stress (SOD2), mitochondrial fission (FIS1, Drp1), and mitochondrial autophagy (LC3B). In vivo experiments demonstrated an increase in inflammatory cells in retinal tissues exposed to NPs, along with elevated levels of TNF-α and IL-1β. Conclusively, both MPs and NPs impact the retina, with NPs displaying greater toxicity. NPs significantly elevate ROS levels in the retina and induce mitochondrial fission and mitophagy in RPE cells compared to MPs. [ABSTRACT FROM AUTHOR]

Rampant industrialization has led to widespread reliance on hydrocarbon polymers for various commercial applications. While these synthetic polymers, commonly known as plastics, degrade in slowly in the environments, the toxic effects of their micro-sized particles remain underexplored. In this study, we synthesized polyisobutylene (PIB) microparticles in the lab and evaluated their toxicity and accumulation in a zebrafish model. Pristine and fluorescent PIB-microplastics (MPs), with particle sizes ranging from 2 to 10 μm, were synthesized using the solvent evaporation method. Fourier-transform infrared spectroscopy (FTIR) confirmed the stability of the suspensions. Zebrafish larvae exposed to various concentrations of PIB-MPs exhibited numerous morphological and molecular changes, including delayed hatching, impaired swimming behavior, increased reactive oxygen species levels, altered mRNA levels of genes encoding antioxidant proteins, and reduced survival rates. Dissections revealed PIB-MP accumulation in the guts of larvae and adult fish within 7–21 days, causing damage to the intestinal mucosa. These findings provide insights into how contaminants like PIB can induce pathophysiological defects in aquatic fauna and pose potential health hazards to humans. [ABSTRACT FROM AUTHOR]

The widespread presence of microplastics (MPs) in freshwater systems as an emerging environmental pollutant has caused a global environmental problem. The present study investigates the distribution and abundance of source pathway and abundance of microplastics in surface sediment samples from rivers discharging into the Gorgan Bay, southeast of the Caspian Sea. A total of 57 surface sediment samples were taken from 19 stations to investigate the potential hot spots of pollution in the four rivers leading to the Gorgan Bay. The average level of microplastics was 333 ± 268 particles/kg. The highest amount is in the estuary of the Qarasu River (1080 ± 380 particles/kg) due to the accumulation of fishing, boating and tourism activities and the lowest amount in the forest area (80 ± 19 particles/kg) in the Klak River. The most common type of microplastic was fiber (68%). Microplastic pollution in the studied rivers is mostly black and gray (75.39%), and about 53% of them were sized less than 1000 μm. Spectroscopic analysis (Fourier Transform Infrared (FT-IR) of the MP showed that 37% were polyethylene, polyethylene (37%) and polypropylene (27%) were the dominating groups. The sediments’ size was significantly correlated (p>0.05) with the presence of microplastics. Sediments with a coarse grain (sand) demonstrated a great potential to store microplastics. The results of this study can be used for the management and protection policies of Gorgan Bay. [ABSTRACT FROM AUTHOR]

In the last century, human activities were the primary cause of air, water, and soil contamination. However, in the twenty-first century, while pollutants like sulfur oxides (SOx) and nitrogen oxides (NOx) remain significant, microplastics (MPs) have emerged as a new global environmental concern. Microplastics are plastic fragments that are less than 5 mm in diameter. Their widespread distribution in aquatic and terrestrial ecosystems has adverse impacts on various ecological systems. The presence of MPs has been well documented in diverse matrices, such as table salt, drinking water, indoor and outdoor air, beer, cold drinks, aquatic organisms, plants, and earthworms. The potential adverse effects of MPs consumption have been reported in various organisms, including earthworms and aquatic fishes; however, their potential effects on human health through respiratory, dietary, and other exposures are still being elucidated. This review provides a comprehensive overview of the current knowledge on potential sources, quantities present in water, table salt, air, and possible routes in the human body through different trophic levels. Furthermore, this paper reviews insights into the movement and accumulation of MPs at different trophic levels (i.e., aquatic, and terrestrial organisms) and their impacts on the cycling of soil carbon and nutrients (nitrogen and phosphorus). Additionally, this review paper addresses the current trends in MPs research and proposes strategic management techniques to mitigate MPs pollution. [ABSTRACT FROM AUTHOR]

Plastics are pervasive in marine ecosystems and ubiquitous in both shallow and deep oceans. Microfibers, among other microplastics, accumulate in deep‐sea sediments at concentrations up to four orders of magnitude higher than in surface waters. This is at odds with the fact that most microfibers are positively buoyant; therefore, it is hypothesized that settling aggregates are vectors for the downward transport of microfibers in the ocean. However, little is known about the impact of microfibers on carbon export. We formed diatom aggregates with differing concentrations of microfibers using roller tanks and observed that microfiber addition stimulated aggregate formation, but decreased their structural cohesion and caused them to break apart more readily, resulting in smaller average sizes. The incorporation of positively buoyant microfibers into settling aggregates reduced their size‐specific sinking velocities proportional to the microfiber concentration. Slower sinking may extend aggregate retention time in the upper ocean, thereby increasing the time available for organic matter remineralization in the upper water column. Here, we show that at concentrations of 105 microfibers per cubic meter, microfiber incorporation into settling marine aggregates decreases potential export flux by 8–45%. Microfibers accumulating at such high concentrations, for example, in Arctic sea ice, may, therefore, be substantially reducing the efficiency of the biological carbon pump relative to the pre‐plastic era. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) are increasingly recognised for their significant impact on the environment and human health. Understanding MPs is crucial to grasp their widespread presence in various environmental areas. The unique properties of MPs, such as their small size, durability, and potential to adsorb and transport environmental pollutants, underscore the necessity of studying their characteristics. This study aims to investigate the physical and chemical characteristics of polypropylene microplastics (PPMPs) and address the dispersion stability issues associated with them. The PPMPs were characterised using scanning electron microscopy (SEM), revealing a surface structure marked by cracks, fractures, and a rough texture. The PPMPs were observed as irregularly shaped, white particles. Their size distribution spans from 14 to 96 µm, with a mean size of 50.00 µm. Fourier Transform Infrared Spectroscopy (FTIR) confirmed the presence of polypropylene functional groups, specifically identifying characteristic peaks at 2952-2846 cm-1 and 1456 -1376 cm-1, indicating C-H stretching and bending vibrations, respectively, with additional peaks suggesting degradation. The effect of different concentrations of sodium lauryl sulfate (SLS) on PPMPs dispersion indicated that 5% SLS led to superior dispersion of PPMPs, thereby addressing the stability issue. These findings provide comprehensive insights into the physical and chemical attributes of PPMPs and their dispersion stability, offering a foundation for informed environmental assessments and the development of effective mitigation strategies. [ABSTRACT FROM AUTHOR]

As the largest producer and consumer of plastic films in the world, China is faced with serious soil pollution caused by traditional plastic films. Biodegradable mulch brings new controversy while solving this problem. Film mulching changes the soil hydrothermal cycle and has an impact on soil physical and chemical properties. However, the effects of different types of mulch films on soil physical and chemical properties and the differences in their degradation characteristics need to be further studied. In this study, seven types of plastic films were selected：bio-permeable black film (IB), bio-permeable white film (IW), bio-permeable grey film (IG), biodegradable black film (DB), biodegradable white film (DW), polyethylene black film (AB), and polyethylene white film (AW) . Xenon or ultraviolet lamps were used to investigate the influence of different kinds of mulch films on the physical and chemical properties of soil and their degradation characteristics. After 35 days of aging with xenon or ultraviolet lamp, other treatments were compared with CK. Xenon lamp and DW treatments significantly increased soil pH the most, by 0.2, whereas UV lamp and DW treatments significantly increased soil organic matter content the most, by 2.93 g·kg-1 . UV lamp and IG treatments increased soil cation exchange the most, by 8.28 cmol·kg-1, but the difference was not significant. The use of mulch films can promote the conversion of nitrate nitrogen to ammonia nitrogen. In terms of mulch film degradation, non-degradable mulch films almost do not degrade in the short term under light. The degradation rates of degradable mulch films was higher under ultraviolet lamps than under xenon lamps. The degradation rate of plastic films under xenon lamps was in the order IG>IB>IW>DW≈DB, while the aging degradation rate of mulch films under UV lamps was in the order DB>IG≈IB>DW≈IW. Molecular bond breaking and functional group changes occur during film degradation, mainly changing in the relative content of the functional group, which leads to the cracking of the mulch film and the formation of microplastics, causing harm to the soil environment. Mulch films have positive effects on soil physical and chemical properties in the short term. Bio-permeable films degrade faster than biodegradable films and maintain their integrity in the short term, making them suitable for crops with shorter growth cycles. However, biodegradable membranes produce more microplastics, which harm the soil environment. [ABSTRACT FROM AUTHOR]

Microplastic pollution has gained global attention due to its toxic impact, particularly on aquatic organisms. As an omnivorous species, tilapia is susceptible to microplastic (MP) exposure in water. This study analyzed the oxygen consumption rate and histology of systemic organs in tilapia exposed to microplastics. An experimental method with a completely randomized design (CRD) was employed in 12 aquariums (40L) equipped with aeration. There were four treatment groups for MP exposure, each with three replicates: concentrations of 1, 10, 100mg/ L, and a control group without MP. The microplastics used were polyethylene particles sourced from soaked plastic bottles collected over 30 days in the Tello River, Makassar. The assessed parameters included oxygen consumption rate and tissue alterations. Data were statistically analyzed using one-way ANOVA for oxygen consumption, while tissue alterations were described qualitatively. The results indicated that the highest oxygen consumption rate occurred at the 10mg/ L treatment (P<0.05), followed by the 1 and 100mg/ L treatments, with the control group showing the lowest rate. Histological tests revealed alterations, including thinning of the interlamella, fractures and swelling of the secondary lamella, and shrinkage of mucus cells in the gills. In the intestines, alterations included thickening of the muscular and serosa layers. The study concluded that MP exposure significantly affects the oxygen consumption rate, particularly at a concentration of 10mg/ L. Additionally, histological alterations were observed in tilapia exposed to microplastics, with the most severe changes occurring in the gills at a concentration of 100mg/ L. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) have received significant attention due to their harmful impact on fish production. This research investigated the protective effects of the yeast, Saccharomyces cerevisia (Sc) against MPs-induced toxicity in the Nile tilapia, focusing on growth performance, fed utilization, gene expression (IGF-1, IGF-2, and GH), biochemical markers, and immune responses. A total of 270 fingerlings were divided into nine groups; the control group received a basal diet, while the other groups were exposed to varying concentrations of Sc (2 and 4g/kg) and MPs (10 and 50mg/ L). MPs exposure negatively impacted growth performance, feed efficiency, survival rates, and body composition. Nevertheless, dietary inclusion of Sc notably improved these parameters, particularly in groups receiving 4g/ kg Sc. Exposure to MPs led to down-regulation of gene expression in the liver and gills, whereas Sc supplementation increased gene expression, especially in the liver. Biochemical analysis showed increased levels of AST and ALP in most groups, with kidney function tests revealing elevated blood urea and serum creatinine. Additionally, cholesterol levels were significantly higher in group receiving 4g/ kg Sc. Immune response assessment indicated elevated lysozyme and antiprotease activities, with the highest levels observed in groups treated with 10mg/ L MPs plus 4g/ kg Sc and 50mg/ L MPs plus 4g/ kg Sc. The results suggest that Saccharomyces cerevisia, particularly at a concentration of 4g/ kg, acts as a beneficial probiotic that alleviates MPs toxicity, enhancing growth, gene expression, and immune responses in the Nile tilapia. [ABSTRACT FROM AUTHOR]

In the natural environment, plastics and microplastics (MPs) are difficult to break down due to their hydrophobicity, the presence of persistent covalent bonds, and their functional groups' resistance to attack. The destiny of both organic and inorganic pollutants at contaminated areas can be influenced by MPs ability to absorb them. Because of their enormous surface to volume ratio and chemical surface characteristics, MPs are able to absorb dangerous substances from their surroundings. Accordingly, the study's main objectives were to provide a concise review of characterization techniques of MP biodegradation techniques, including the nano‐enabled methods, and the gaps in current research were outlined. This review paper summarizes the degradation mechanism and efficiency of MPs in different circumstances. For the purpose of eliminating plastic pollution, this work will help for the further studies. [ABSTRACT FROM AUTHOR]

High levels of plastic pollutants threaten aquatic habitats as the plastic materials are ingested by aquatic organisms as food. This study assessed seasonal variations of microplastics and the water quality of the Njoro River and Lake Nakuru, Kenya. Selected water physico-chemical parameters were measured. Microplastic (MP) abundance in the surface water samples in the dry season was recorded as 47–649 MPs 300 l−1 for sampling points in the Njoro River, and 54–508 MPs 300 l−1 at Fisher's Point in Lake Nakuru. Abundances during the rainy season were measured as 8–389 MPs 300 l−1 and 28–259 MPs 300 l−1 for the Njoro River and Lake Nakuru, respectively. Our study observed a significant contribution of microplastics from polymers, namely polyester (40%), polypropylene (25%), polyethylene (20%) and polyethylene terephthalate (10%). Recorded ranges of the water parameters were: salinity 0.085–2.59 ± 0.03 ppt; temperature 14.22–23.69 ± 0.07 °C; pH 8.8–9.3; turbidity 13.95–36.03 ± 0.35 NTU; total nitrogen 5.9–8.57 ± 3.24 mg l−1; total phosphorus 7.49–9.41 ± 1.84 mg l−1; electrical conductivity 73.3–533.3 ± 0.64 μs cm−1; and total dissolved solids 46.67–243.33 ± 0.11 ppm. These ranges were within the standards recommended by WHO and U.S. EPA. The results indicate the possibility for the quantity and mass of microplastic particles in Lake Nakuru to surpass those in the Njoro River. [ABSTRACT FROM AUTHOR]

Fluorescence spectroscopy is an attractive candidate for analyzing samples of nylon. Impurities within the polymers formed during the synthesis and processing of nylons give rise to the observed fluorescence, allowing for nylons to be analyzed based on their impurities. Nylons from the same source are expected to display similar fluorescence profiles, and nylons with different fluorescence are expected to be from different sources. This paper investigates an important case where different nylons displayed similar fluorescence, preventing easy discrimination. Samples of Nylon 6 and Nylon 6/12 had visually indistinguishable excitation–emission matrices (EEM), excitation spectra, fluorescence spectra, and synchronous fluorescence spectra at larger Δλ. By collecting synchronous fluorescence spectra at smaller Δλ, additional features in the fluorescence profiles were identified that allowed for some discrimination between the two nylons. Combining the EEM and synchronous fluorescence data with chemometric algorithms provided a clearer differentiation between the two nylons. parallel factor analysis, principal component analysis, and common dimension partial least squares (ComDim-PLS) showed two distinct clusters in the data, with ComDim-PLS providing the greatest distinction between the clusters. The loadings revealed the variables of interest to the ComDim-PLS were the 400 nm and 335 nm bands for all synchronous fluorescence spectra, the 460 nm and 310 nm bands for the Δλ = 20 nm and Δλ = 30 nm synchronous fluorescence spectra, and the 440 nm band for the Δλ = 20 nm synchronous fluorescence spectra. The linear discriminant analysis performed with the PLS data yielded a classification accuracy of 95% with the EEM data and 100% with the synchronous fluorescence data, displaying the power of this technique to differentiate two different nylons with visually indistinguishable fluorescence spectra. [ABSTRACT FROM AUTHOR]

BACKGROUND: Microplastics (MPs) have become a global environmental problem, emerging as contaminants with potentially alarming consequences. However, long-term exposure to polystyrene microspheres (PS-MS) and its effects on diet-induced obesity are not yet fully understood. OBJECTIVES: We aimed to investigate the effect of PS-MS exposure on high-fat diet (HFD)–induced obesity and underlying mechanisms. METHODS: In the present study, C57BL/6J mice were fed a normal diet (ND) or a HFD in the absence or presence of PS-MS via oral administration for 8 wk. Antibiotic depletion of the microbiota and fecal microbiota transplantation (FMT) were performed to assess the influence of PS-MS on intestinal microbial ecology. We performed 16S rRNA sequencing to dissect microbial discrepancies and investigated the dysbiosis-associated intestinal integrity and inflammation in serum. RESULTS: Compared with HFD mice, mice fed the HFD with PS-MS exhibited higher body weight, liver weight, metabolic dysfunction-associated steatotic liver disease (MASLD) activity scores, and mass of white adipose tissue, as well as higher blood glucose and serum lipid concentrations. Furthermore, 16S rRNA sequencing of the fecal microbiota revealed that mice fed the HFD with PS-MS had greater a-diversity and greater relative abundances of Lachnospiraceae, Oscillospiraceae, Bacteroidaceae, Akkermansiaceae, Marinifilaceae, Deferribacteres, and Desulfovibrio, but lower relative abundances of Atopobiaceae, Bifidobacterium, and Parabacteroides. Mice fed the HFD with PS-MS exhibited lower expression of MUC2 mucin and higher levels of lipopolysaccharide and inflammatory cytokines [tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), IL-1β, and IL-17A] in serum. Correlation analyses revealed that differences in the microbial flora of mice exposed to PS-MS were associated with obesity. Interestingly, microbiota-depleted mice did not show the same PS-MS-associated differences in Muc2 and Tjp1 expression in the distal colon, expression of inflammatory cytokines in serum, or obesity outcomes between HFD and HFD + PS-MS. Importantly, transplantation of feces from HFD + PS-MS mice to microbiota-depleted HFD-fed mice resulted in a lower expression of mucus proteins, higher expression of inflammatory cytokines, and obesity outcomes, similar to the findings in HFD + PS-MS mice. CONCLUSIONS: Our findings provide a new gut microbiota-driven mechanism for PS-MS–induced obesity in HFD-fed mice, suggesting the need to reevaluate the adverse health effects of MPs commonly found in daily life, particularly in susceptible populations. [ABSTRACT FROM AUTHOR]

Concern over microplastics (MPs) in the environment is rising. Microplastics are generally known to exist in aquatic settings, but less is known about their occurrence in soil ecosystems. When plastic waste builds up in agricultural areas, it can have a negative impact on the environment and food sources, as well as have an indirect effect on all trophic levels of the food chain. This paper addresses the relationship between microplastics and the management of plastic waste, which contributes to their accumulation, and it describes the sources and the movement processes of microplastics in agricultural soils as a result of natural events and disasters. Evaluating the impact of weather on coastal microplastic contamination is critical, as extreme weather events have become more frequent in recent years. This study sheds light on how weather patterns affect the dispersion of plastic waste in terrestrial habitats, including the impacts of seasonality and extreme weather. According to the results of this review, typhoons, monsoons, rainfall, and floods contribute significantly more microplastics to the surface sediment through surface runoff and wind transport, particle redistribution caused by agitated waves, and fragmentation under intense abrasion forces. Severe weather conditions have the potential to disperse larger and more varied kinds of microplastics. [ABSTRACT FROM AUTHOR]

An experimental study was conducted to identify the behaviour of neutrally buoyant microplastics (specific density, 0.94) in different hydrodynamic conditions while focusing on combined wave–current conditions and the mixing across the hyporheic zone. For in-water-column microplastics, it was observed that the streamwise dispersion of neutrally buoyant microplastics is comparable to solute dye in both slow open-channel flow conditions and combined wave–current conditions. However, for in-bed microplastics, when compared to soluble tracers, the longer timespans associated with the hyporheic exchange process allowed the density effects to enhance the vertical exchange when compared to solutes. [ABSTRACT FROM AUTHOR]

Wastewater treatment plants (WWTPs) have been identified as important point sources for microplastics (MPs) in the environment; monitoring MP emissions in the WWTP effluent is therefore essential for contamination control. The aim of this study is to acquire a large number of samples (320) over a period of two years and three months to determine the temporal variations in microplastic contamination in the outlet of the municipal WWTP Landau-Mörlheim. The effluent of the third cleaning stage is sampled with a 10 µm filter cartridge, processed in the laboratory using a hydrogen peroxide treatment, and MPs are then detected by fluorescence staining. The results show high temporal variations in the microplastic concentrations in the effluent of the WWTP. This indicates that high numbers of samples are necessary to obtain a representative assessment of the microplastic emissions; single samples are not representative. The average microplastic concentration in the effluent was 27.8 ± 29.8 MP/L, ranging from 0.6 MP/L to 194.0 MP/L. This leads to a yearly emission of 1.5 × 1011 MP for the WWTP Landau-Mörlheim, corresponding to an emission of 2.8 × 106 MP/inhabitant and year. Statistically significant seasonal variations could not be observed, although there is a trend towards lower MP concentrations in summer. Further, no correlations with other wastewater or weather parameters could be found. [ABSTRACT FROM AUTHOR]

Plastic pollution has become a growing concern for environmental and human health in recent years. Currently, research suggests that soil compartments might be highly contaminated, with compost being one of the major sources for plastic contamination, especially at reduced sizes. In Geneva, microplastic contamination has already been evaluated in industrial compost but not yet in field-side compost. Therefore, this work focuses on the evaluation of concentrations and the characterization of microplastic particles (MPs) in field-side compost in Geneva. Four different field-side composts were sampled in Geneva and sieved with sizes ranging from >5 mm to 0.5 mm. The MPs were visually sorted when possible, and the smaller ones were treated by digestion and density separation processes. All of the MPs were analyzed with infrared spectroscopy. The results (sizes > 5 mm to 1.25 mm) reveal concentrations between 195 ± 64 and 1315 ± 375 plastic particles/kg of compost and the presence of conventional plastics in every compost. MPs were present in almost every size fraction for the four composts, and the origin of waste seemed to influence their concentrations. Indeed, composts free from organic household waste had lower concentrations than the ones accepting that kind of waste. Littering and waste still wrapped in plastic were also noticed for the composts with higher concentrations of MPs. The characterization results highlight the variety of plastic types among the composts, mostly represented by PE (polyethylene), PVA (polyvinyl alcohol), PP (polypropylene), and DAIP (polydiallyl iso-phthalate) in general but also specific contamination by PEMA (poly ethyl methacrylate) for only one of the composts. Further work is needed to evaluate the distribution of MPs according to their size or the types of waste used in composting, especially the potential degrading conditions of plastics, to mitigate their presence in composts. [ABSTRACT FROM AUTHOR]

Under varying flow rate conditions, the transport and retention of polydisperse microplastics (MPls), with an average particle size of 16 ± 6 µm, were investigated in saturated porous media. First-order reversible and irreversible kinetic sorption models were used to describe the sorption kinetics. Sensitivity analyses provided insight into the effects of each sorption parameter. Both numerical modeling and experimental measurements were utilized to evaluate the retention rates of sand filters. The influence of flow rate on sorption was reflected in variations in the distribution coefficient (Kd), the mass transfer coefficient (β), and the irreversible sorption rate (K1). Lower flow rates were associated with higher Kd and β values, indicating increased sorption and reduced mass transfer rates. An increase in Kd resulted in a more gradual sorption process, with a decrease in peak concentration, whereas changes in β had a comparatively smaller impact on sorption rate and peak concentration. Lower K1 values were linked to higher peak concentrations and decreased retention efficiency. Numerical modeling revealed retention rates of 28 ± 1% at a flow rate of 31 mL min−1 and 17 ± 1% at 65 mL min−1. The introduction of MPls into saturated sand environments modifies the transport dynamics within the medium. Consequently, these alterations affect the hydrological characteristics of porous media, impacting groundwater quality and agricultural output. The mean absolute error (MAE) of 6% between the modeled and observed retention rates indicated a high level of accuracy. This study underscores the importance of examining retention efficiency and the accuracy of numerical models in understanding MPl transport in porous media. [ABSTRACT FROM AUTHOR]

Microplastics have emerged as ubiquitous contaminants, attracting increasing global attention. Recent evidence confirms the presence of microplastics in human blood, suggesting their potential to interact with cells and induce adverse physiological reactions in various organs as blood circulates. To quantify the distribution of microplastics and assess their potential effects on human health, the effective separation of microplastics from blood is crucial. However, current methods for separating microplastics from blood are limited in effectiveness and simplicity. This study proposes a microfluidic device that utilizes traveling surface acoustic waves to separate microplastics from blood. While traveling surface acoustic waves have been employed to separate various particles, a systematic study on the separation of microplastics from blood samples has not been previously reported. Specifically, the theoretical values of the acoustic radiation factor for various types of microplastics and blood cells were investigated. The significant differences in resonant frequencies indicated the feasibility of separating microplastics of different sizes and types from blood cells. Experimental validation was performed using a polydimethylsiloxane microfluidic device on a piezoelectric lithium niobate substrate. The device successfully separated 5- and 10-micrometer polystyrene microplastics from blood samples. The effects of power and flow rate on separation efficiency were also systematically investigated. This study provides a novel approach for the effective separation of microplastics from blood, contributing to the assessment of their distribution and potential health impacts. [ABSTRACT FROM AUTHOR]

The global microplastic pollution issue, as a result of the indispensable usage of microplastics in building materials, packaged food, medical products and consumer goods, poses significant health problems for the population. These small particles can penetrate intact cell barriers in the intestines and alveoli, thereby entering the bloodstream. The aim of this pilot study was to investigate the effects of reduced plastic consumption on blood pressure. Eight adult and healthy participants abstained from consuming commercially produced bottled beverages and restricted their primary fluid intake to tap water. Blood pressure was measured on both sides before, after 14 days and after 28 to 30 days of this partial plastic diet. Women exhibit a significant change in systolic blood pressure on the right arm after 2 and 4 weeks, while the left arm demonstrates no significant changes in blood pressure. On the contrary, in men, systolic blood pressure values on both arms show no significant alterations, attributable to the high variability across the three participants. Moreover, no significant differences in systolic blood pressure were observed when analysing the entire cohort. Significant findings are evident only at the two-week mark for diastolic blood pressure for all participants in both arms. When considering diastolic blood pressure separately for women and men, men again show no significant changes in blood pressure on either arm. However, women exhibit a significant decrease in diastolic blood pressure on the left arm after 2 weeks and a statistically significant decline in diastolic blood pressure on the right arm after both 2 and 4 weeks. The results of the study suggest, for the first time, that a reduction in plastic use could potentially lower blood pressure, probably due to the reduced volume of plastic particles in the bloodstream. To confirm this hypothesis, a larger sample of male and female participants must be examined, ideally with the monitoring of plastic concentration in the blood. [ABSTRACT FROM AUTHOR]

This study evaluated the ingestion of microplastics (MP) by copepods in Terminos Lagoon (TL), a RAMSAR-listed site in the southern Gulf of Mexico. The evaluation was carried out in two contrasting seasons of 2022, as follows: the dry (April) and the rainy (October). Copepods were collected using a conical plankton net (mesh size of 200 μm). In the laboratory, a pool of all pelagic adult copepod taxa was picked, and the MP inside the organisms were extracted, classified, and photographed using traditional optical and scanning electron microscopy. A total of 268 MP particles were extracted from the interior of copepods; among them, 149 and 119 corresponded to the dry and rainy seasons, respectively. The ingestion rate in the dry season was 0.14, while in the rainy season, it was 0.11. In addition, fibers, plastic fragments, and microspheres with different colors (blue, red, black, green, transparent, and multicolored), sizes, forms (angular, round, triangular, and twisted), and textures were also detected. Fibers were the most abundant MP found in a proportion of more than 85%. In addition, in some sampling sites, microspheres were observed with high relative abundance values (80%). In some sites, fragments reach 20% of the total abundance. Significant differences were observed between the two seasons. The sites closest to the urban area adjacent to TL observed high diversity and abundance of MP. The higher abundance of MP in the dry season is due to lower river discharge, on the other hand. Thus, MP particles accumulate and become available for consumption by copepods. This is the first study that has revealed that the MP was ingested by the copepods in TL. Furthermore, this study provides a baseline information for future research on the abundance of MP in the Gulf of Mexico region. [ABSTRACT FROM AUTHOR]

Carbopol® is a typical jelly agent belonging to the family of cross-linked polyacrylic acid copolymers. It is largely used in antibacterial gels due to its self-wetting properties. In its pristine physical form, Carbopol® falls under the definition of microplastics, though significant changes could occur once added to hydroalcoholic solvents of the liquid formulations. To date, no life-cycle data regarding the physical state are available for this substance or for other similar polymers of the same chemical class. The aim of the present study was the investigation of the fate of Carbopol®-derived microplastics used in the formulation of typical hand sanitizer gels available in the Italian market, such as Amuchina® X-Germ, along the product life cycle. An experimental model was designed to detect the presence of Carbopol® microparticles from product manufacturing to the final use. FTIR and µ-FTIR were used to detect and characterize solid particles after the optimization of the sample preparation of different experimental matrices. While Carbopol® as such can be classified as a microplastic, in the commercial product, Carbopol® particles were not detected. Ten volunteers used the product according to the instructions reported on the label, and finally they rinsed their hands. Carbopol®-based particles were not detected in the water rinse, indicating that, after usage, the original form of the Carbopol microparticles was not retrieved. The study proposes, for the first time, a simple and comprehensive experimental approach to identify and characterize microplastics in finished products and along the life cycle by simulating their real-life usage. This approach could be also useful to evaluate the release of chemical components into the environment through the use of dermal products. [ABSTRACT FROM AUTHOR]

Microplastic distribution surveys centered on Korea's Gwangyang Bay and southern coastal waters. Gwangyang Bay seawater averaged 3.17 ± 1.23 particles/L, and sediments averaged 462.4 ± 143.9 particles/kg. The southern coastal seawater averaged 0.10 ± 0.09 particles/L, and the sediments averaged 50.6 ± 29.7 particles/kg. Microplastics flowing from land, through physical modeling of ocean currents in Gwangyang Bay and southern coastal waters, pass through the Yeosu Strait and flow into the southern coastal waters. At the same time, it is judged that the southern coastal waters showed somewhat lower abundance than the Gwangyang Bay waters because they move toward the Korean Strait due to the Jeju warm current water and Tsushima current water, strongly generated in summer. In addition, the seawater microplastic abundance showed a higher abundance than that on the site adjacent to the land in the southern coastal waters, which is the study area. On the other hand, the results for sediment microplastic abundance were opposite to the surface seawater microplastic results. Therefore, it is judged that entering one source of pollution does not affect the distribution of microplastics in Gwangyang Bay and southern coastal waters, but rather this occurs in different forms. [ABSTRACT FROM AUTHOR]

Microplastics are ubiquitous in marine environments and have been documented across all ocean compartments, especially surface waters, across the world. Even though several studies identify the presence of microplastics in the world's five oceans, there remains an overt problem of large inconsistencies in their sampling, extraction, and consequent quantification. Despite the complexity of these methodologies, researchers have tried to explore microplastic abundance in ocean surface waters. Using a systematic review approach, a dataset was derived from 73 primary studies undertaken since the year 2010 following the Oslo and Paris Conventions (OSPAR) guidelines to monitor and harmonise marine debris. The results showed differences in the abundance and distribution of microplastics in surface waters across oceans. The overall concentration of microplastics in all five oceans ranged between 0.002 and 62.50 items/m3, with a mean abundance of 2.76 items/m3. The highest mean concentration of microplastics was found in the Atlantic (4.98 items/m3), while the least was observed in the Southern Ocean (0.04 items/m3). While challenging, this paper recommends harmonisation of the sampling, separation, and identification methods across the globe to aid in the design of the appropriate mitigation strategies for reducing marine plastic pollution. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) pollution has become a global pollution problem, potentially affecting soil carbon cycling and structure stability in agricultural systems. However, the effects of MPs pollution on soil organic carbon fractions/transformation and soil aggregate stability remain unknown. Thus, a combination of one-year pot and short-term mineralized incubation experiments that involved a reference (CK, with no MPs), different concentrations (0.1, 1, and 2 w/w % polyethylene (PE)), and types (0.1 w/w % PE, polypropylene (PP), and polyvinyl chloride (PVC)) of MPs were carried out to investigate the effects on the soil aggregate stability and organic carbon mineralization after one year of adding MPs. The results showed that the size distribution of the soil partial aggregates varied significantly as affected by the MP concentration and type (p ˂ 0.05). Compared with 0.1% PE, significant increases in the MWD (mean weight diameter) and GMD (geometric mean diameter) of 2% PE of 27.22% and 32.73%, respectively, were detected. In addition, high concentrations (>1%) of PE significantly decreased the dissolved organic carbon (DOC) (p ˂ 0.05), whereas they significantly increased the stable carbon fractions including the particulate organic carbon (POC) and mineral-bound organic carbon (MOC) (p ˂ 0.01). Meanwhile, compared with the CK, both MP types and doses significantly decreased the soil organic carbon mineralization rate (SOCMR) and cumulative mineralization amount (CM) (p ˂ 0.001). Moreover, the MPs significantly increased the total PLFA (phospholipid fatty acid) by 261.9–438.8% (p ˂ 0.01), and the soil pH and total PLFA were the dominant factors that affected the SOCMR as affected by MPs. Thus, a high concentration (>1%) of PE significantly decreased the SOCMR by influencing the soil pH, TN, and macroaggregate (R>0.25) content and microbial community composition. This study provided evidence of the feedback of MPs pollution on soil C dynamic and aggregates in cultivated soil in South China. [ABSTRACT FROM AUTHOR]

Low-density polyethylene (LDPE) is widely used in food packaging and agricultural mulching, but its disposal generates macro, meso and microplastics that infiltrate the food chain and carry harmful substances. The present study aimed to improve remediation strategies for soils contaminated with LDPE and enhance the survivability of Eisenia fetida. The study dissolved LDPE in trichloroethylene and treated it with starch, hydrogen peroxide, nitric acid and acetic acid, initiating thermo-oxidative reactions. The treatment decreased LDPE's crystallinity index from 48.48% to 44.06% (single treatment), 44.06% to 40.02% (double treatment) and 40.02% to 32.98% (triple treatment), achieving a 15.5% reduction in crystallinity. LDPE microplastics with 40.02% crystallinity showed lower mortality rates in Eisenia fetida earthworms compared to those with 44.06% and 32.98% crystallinity and untreated LDPE. When introduced to E. fetida, microbiota in the earthworm casts included unidentified species from Pseudomonas and Zoopagomycota, known polyethylene degraders. Microbial analysis of treated LDPE microplastics showed changes in gut microbiota, including potential degraders from Aeromonas and Malassezia restricta. XRD (X-ray diffraction techniques analyses) and FTIR(Fourier Transform Infrared Spectroscopy) analyses provided insights into distinct LDPE degradation patterns, identifying hydroxyl and carboxylic groups as functional groups. The study also investigated the ability of altered microflora with treated microplastics to degrade LDPE, favouring decreased earthworm mortality rates. The crystallinity index of treated polyethylene further reduced from 40.02% to 23.58% after 21 days of exposure to E. fetida. This research advances the understanding of oxidised plastics' ecological impacts and will help to develop environmentally sustainable and biodegradable LDPE. [ABSTRACT FROM AUTHOR]

Microplastics (MPs), or tiny pieces of plastic, have become a major global environmental problem because of their ubiquitous availability and possible risks to aquatic ecosystems. Surma is one of the vital rivers in Bangladesh located in the northeast part, with higher chances of MP pollution due to different anthropogenic reasons. In this instance, we carried out the investigation on the abundance, distribution, and characteristics of MPs in the sediment and surface water of the river. Samples were collected from 15 major locations of the Surma river flowing through Sylhet municipality. MPs particles were isolated from sediments and water samples utilizing techniques like sieve analysis, wet peroxide oxidation, density separation, and filtration and then characterized using a stereomicroscope. The abundance of MPs recorded 8 to 18 items/L in water samples (mean ± SD: 12.33 ± 2.98 items/L) and 360 to 1120 items/kg in sediment samples (mean ± SD: 522.67 ± 197.84 items/kg). The prominent size, shape, and color of MPs isolated from sediments were 1–2 mm sizes (24.49%), fragments (47.71%), and black (30.65%). However, for water samples, 1–2 mm sizes (37.22%), fiber shapes (48.48%), and transparent colors (38.46%) were dominant features. Conspicuously, in both sediment and water samples, there was a higher prevalence of smaller sized particles, posing a significant threat to the ecosystem. This heightened risk stems from the increased likelihood of ingestion by microorganisms, as well as the larger surface area of these particles, which may serve as vectors for other pollutants like organic pollutants and heavy metals. A greater abundance of fibers suggests an increased presence of lightweight particles in the water and sediment. Furthermore, the transparent color of the MPs in water might be impacted by prolonged weathering in the river, while the presence of black‐colored MPs in sediment points to the existence of plastic pellets originating from industrial and diverse sources. Future studies should concentrate on long‐term and broad monitoring, ecological effects, and practical mitigation techniques for MPs, providing essential baseline data to guide the formulation of policies in developing nations. Practitioner points: 12.33 items/L in surface water and 522.67 items/kg in sediment were observed.High correlation indicates a single MP source in mainstream water, differing from sediment.Fiber shapes, black, and transparent colored MPs are dominant.Higher prevalence of smaller sized MPs, posing a significant threat to the aquatic ecosystem. [ABSTRACT FROM AUTHOR]

Water pollution involves the coexistence of microplastics (MPs) and traditional pollutants, and how can MPs influence the adsorption of other pollutants by biochar during the treatment process remains unclear. This study aimed to investigate the influence of polystyrene microplastics (PS MPs) on the adsorption of cadmium (Cd) and ciprofloxacin (CIP) by magnetic biochar (MTBC) in the single and binary systems. MTBC was prepared using tea leaf litter; the effects of time, pH, and salt ions on the adsorption behaviors were investigated; and X‐ray photoelectronic spectroscopy (XPS) and density flooding theory analysis were conducted to elucidate the influence mechanisms. Results indicated that PS MPs reduced the pollutants adsorption by MTBC due to the heterogeneous aggregation between PS MPs and MTBC and the surface charge change of MTBC induced by PS MPs. The effects of PS MPs on heavy metals and antibiotics adsorption were distinctly different. PS MPs reduced Cd adsorption on MTBC, which were significantly influenced by the solution pH and salt ions contents, suggesting the participation of electrostatic interaction and ion exchange in the adsorption, whereas the effects of PS MPs on CIP adsorption were inconspicuous. In the hybrid system, PS MPs reduced pollutants adsorption by MTBC with 66.3% decrease for Cd and 12.8% decrease for CIP, and the more remarkable reduction for Cd was due to the predominated physical adsorption, and CIP adsorption was mainly a stable chemisorption. The influence of PS MPs could be resulted from the interaction between PS MPs and MTBC with changing the functional groups and electrostatic potential of MTBC. This study demonstrated that when using biochar to decontaminate wastewater, it is imperative to consider the antagonistic action of MPs, especially for heavy metal removal. Practitioner Points: Magnetic biochar (MTBC) was prepared successfully using tea leaf litter.MTBC could be used for cadmium (Cd) and ciprofloxacin (CIP) removal.Polystyrene microplastics (Ps MPs) reduced Cd/CIP adsorption by MTBC.Ps MPs effects on Cd adsorption were more obvious than that of CIP.Ps MPs changed the functional groups and electrostatic potential of MTBC, thus influencing MTBC adsorption. [ABSTRACT FROM AUTHOR]

Watershed models of plastic export from rivers to oceans have large uncertainties, and improvements require direct measurements of riverine macroplastic (>5 mm) and microplastic (<5 mm). Also, plastic represents allochthonous carbon inputs to rivers but is rarely measured as carbon mass. We quantified plastic and organic matter within floating debris rafts and open water in an urban river. Macroplastics only occurred in debris rafts. Microplastics had higher concentrations in debris rafts relative to open water. Across sites, organic matter was positively correlated with microplastics and macroplastics. Last, carbon in plastic was 40% of the carbon mass in coarse particulate organic matter in debris rafts. Floating plastic litter accumulates with particulate organic matter in debris rafts. Plastic is an overlooked and ecological meaningful component of carbon standing stocks in urban rivers. Results will inform improved carbon budget calculation in rivers and watershed models of plastic export. Practitioner Points: Plastic particles floating on the surface of an urban river accumulate in debris rafts compared to open water in terms of count and mass.Abundance and composition of plastic particles in debris rafts were distinct from those in open water areas.Plastic litter as units of carbon mass was in the same order of magnitude as carbon mass in course particulate organic matter.Plastic litter moves in similar ways to naturally occurring organic particles and should be measured as a part of the riverine carbon cycle. [ABSTRACT FROM AUTHOR]

Mesoscale eddies – ocean vortices with spatial scales of tens to hundreds of kilometers and time scales of months to years – are among the most energetic forms of flow in the ocean, and may act as significant transporters of floating microplastics. Yet, shipboard observation has thus far not clarified the abundance and transport of microplastics in mesoscale eddies. We conducted floating microplastic surveys in an intense cyclonic mesoscale eddy with a large sea surface height depression (approximately 0.8 m), a so-called cold-core ring, in the Kuroshio Extension recirculation gyre (KERG) southeast of Japan. The concentration of microplastics within the eddy (460 × 104 pieces/km2) was one or two orders of magnitude higher than in the adjacent oceanic waters, likely due to the acquisition of microplastics from the microplastic-rich Kuroshio Extension (KE) when detaching, as well as the horizontal entrainment of particles by the eddy. Our examination by using an assimilation product showed that most particles captured by the eddy remained within for several months while the eddy moved clockwise in the KERG. These results suggest that mesoscale eddies are of importance in the transportation and redistribution of microplastics on the ocean surface. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) and nanoplastics (NPs) have emerged as significant environmental pollutants with potential detrimental effects on ecosystems and human health. Several studies indicate their interaction with enzymes; this topic represents a multifaceted research field encompassing several areas of interest from the toxicological and ecotoxicological impact of MPs and NPs on humans and wildlife to the biodegradation of plastics by microbial enzymes. This review aims to provide a critical analysis of the state-of-the-art knowledge of the interaction of MPs and NPs on the enzyme carbonic anhydrase (CA), providing recent insights, analyzing the knowledge gaps in the field, and drawing future perspectives of the research and its application. CA is a widespread and crucial enzyme in various organisms; it is critical for various physiological processes in animals, plants, and bacteria. It catalyzes the reversible hydration of CO2, which is essential for respiration, acid–base balance, pH homeostasis, ion transport, calcification, and photosynthesis. Studies demonstrate that MPs and NPs can inhibit CA activity with mechanisms including adsorption to the enzyme surface and subsequent conformational changes. In vitro and in silico studies highlight the role of electrostatic and hydrophobic interactions in these processes. In vivo studies present mixed results, which are influenced by factors like particle type, size, concentration, and organism type. Moreover, the potentiality of the esterase activity of CA for plastic degradation is discussed. The complexity of the interaction between CA and MPs/NPs underscores the need for further research to fully understand the ecological and health impacts of MPs and NPs on CA activity and expression and glimpses of the potentiality and perspectives in this field. [ABSTRACT FROM AUTHOR]

The growing production and use of plastics significantly contribute to microplastics (MPs) contamination in the environment. Humans are exposed to MPs primarily through the gastrointestinal route, as these particles are present in beverages and food, e.g., sugar. Effective isolation and identification of MPs from food is essential for their elimination. This study aimed to evaluate factors influencing the isolation of MPs from sucrose solutions to determine optimal conditions for the process. Polyethylene particles were used to test separation methods involving chemical digestion with acids and filtration through membrane filters made of nylon, mixed cellulose ester, and cellulose acetate with pore sizes of 0.8 and 10 µm. The effects of temperature and acid type and its concentration on plastic particles were examined using scanning electron microscopy and µ-Raman spectroscopy. The results indicate that increased temperature reduces solution viscosity and sucrose adherence to MPs' particles, while higher acid concentrations accelerate sucrose hydrolysis. The optimal conditions for MPs' isolation were found to be 5% HCl at 70 °C for 5 min, followed by filtration using an efficient membrane system. These conditions ensure a high recovery and fast filtration without altering MPs' surface properties, providing a reliable basis for further analysis of MPs in food. [ABSTRACT FROM AUTHOR]

Pollution by microplastics and nanoplastics (MNPs) raises concerns, not only regarding their environmental effects, but also their potential impact on human health by internalization via the small intestine. However, the detailed pathways of MNP internalization and their toxicities to the human intestine have not sufficiently been understood, thus, further investigations are required. This work aimed to understand the behavior of MNPs, using in vitro human intestine models, tri-culture models composed of enterocyte Caco-2 cells, goblet-like HT29-MTX-E12 cells, and microfold cells (M cells) induced by the lymphoblast cell line Raji B. Three sizes (50, 100, and 500 nm) of polystyrene (PS) particles were exposed as MNPs on the culture model, and size-dependent translocation of the MNPs and the contributions of each cell were clarified, emphasizing the significance of the tri-culture model. In addition, potential concerns of MNPs were suggested when they invaded the circulatory system of the human body. [ABSTRACT FROM AUTHOR]

Simple Summary: The increasing production of plastics and the failure to properly manage their post use represent the primary sources of environmental and human contamination caused by plastic degradation products, namely micro- and nano-plastics (MNPLs). Accumulating evidence supports the intestinal toxicity of ingested MNPLs, and their possible role as a driver for the increased incidence of colorectal cancer (CRC) has also been proposed. Moreover, colonic mucus layer disruption may further facilitate MNPL passage into the bloodstream, thus promoting the toxic effects of MNPLs on different organ systems. We herein discuss the pathophysiological mechanisms impaired by MNPL oral exposure in healthy conditions and individuals with compromised intestinal barrier function, including inflammatory bowel disease (IBD) and CRC patients, considered high-risk populations, by highlighting the potential contribution of MNPL-induced platelet activation. Micro- and nano-plastics (MNPLs) can move along the food chain to higher-level organisms including humans. Three significant routes for MNPLs have been reported: ingestion, inhalation, and dermal contact. Accumulating evidence supports the intestinal toxicity of ingested MNPLs and their role as drivers for increased incidence of colorectal cancer (CRC) in high-risk populations such as inflammatory bowel disease (IBD) patients. However, the mechanisms are largely unknown. In this review, by using the leading scientific publication databases (Web of Science, Google Scholar, Scopus, PubMed, and ScienceDirect), we explored the possible effects and related mechanisms of MNPL exposure on the gut epithelium in healthy conditions and IBD patients. The summarized evidence supports the idea that oral MNPL exposure may contribute to intestinal epithelial damage, thus promoting and sustaining the chronic development of intestinal inflammation, mainly in high-risk populations such as IBD patients. Colonic mucus layer disruption may further facilitate MNPL passage into the bloodstream, thus contributing to the toxic effects of MNPLs on different organ systems and platelet activation, which may, in turn, contribute to the chronic development of inflammation and CRC development. Further exploration of this threat to human health is warranted to reduce potential adverse effects and CRC risk. [ABSTRACT FROM AUTHOR]

Microplastic degradation by bacteria can degrade low-density polyethylene (LDPE). This study aimed to analyze the potential of Ambon Bay bacteria for microplastic degradation, the condition of microplastics after degradation, and identification of the potential for microplastic degradation. The results of isolation revealed as many as 20 bacterial isolates, which correlated with physicochemical conditions in the waters of Ambon Bay. Nine of them could degrade microplastics as indicated by the presence of a clear zone, namely KA1, KA2, KA3, KA4, KA5, KA9, KA10, KS6, and KS8. They were checked for biofilm formation, microplastic hydrophobicity, and percentage of microplastic weight reduction. Four isolates with the highest percentage of microplastic weight reduction on day 40 were KA1, KA2, KA3, and KA10 at 36.19%, 10.16%, 28.39%, and 17.07%, respectively. The results of LDPE microplastic degradation showed differences using field emission scanning electron microscopy-energy dispersive spectroscopy (FESEM/EDS), attenuated total reflection-fourier transform infrared (ATRFTIR), and X-ray diffraction (XRD). The bacterial isolates identified were KA1 (Bacillus cereus), KA2 (Bacillus toyonesis), KA3 (Bacillus paramycoides), and KA10 (Escherichia coli). Indigenous bacteria from the waters of Ambon Bay have the potential to degrade LDPE microplastics, which causes structural changes, decreased crystallinity, weight, and C=C groups in microplastics after degradation, with bacterial isolate KA1 identified as Bacillus cereus showing the best potential with degradation of LDPE microplastics by 36.19%. [ABSTRACT FROM AUTHOR]