Search

We developed a series of Co-rich CoxCr25(FeNi)75−x (x = 35, 45, 55, 65) high entropy alloys with improved strength and/or ductility, derived from lowering the stacking fault energy (SFE) and reducing the fcc phase stability of the equiatomic CoCrFeNi alloy. Thermodynamics and ab initio calculations demonstrated that increasing Co while decreasing Fe and Ni concentrations lower the SFE and reduce the fcc phase stability. The Co35Cr25Fe20Ni20 and Co45Cr25Fe15Ni15 alloys with single fcc phase, exhibit superior tensile properties, contributing to the twinning and fcc → hcp martensitic transformation. The present study offers a guideline for designing high-performance high entropy alloys. A series of novel Co-rich non-equiatomic high entropy alloys with enhanced tensile properties were developed by lowering the stacking fault energy and reducing the phase stability of equiatomic CoCrFeNi alloy. [ABSTRACT FROM AUTHOR]

Ti40Zr10Cu36Pd14 Bulk Metallic Glass (BMG) appears very attractive for future biomedical applications thanks to its high glass forming ability, the absence of toxic elements such as Ni, Al or Be and its good mechanical properties. For the first time, a complete and exhaustive characterization of a unique batch of this glassy alloy was performed, together with ISO standard mechanical tests on machined implant-abutment assemblies. The results were compared to the benchmark Ti-6Al-4V ELI (Extra-Low-Interstitial) to assess its potential in dental implantology. The thermal stability, corrosion and sterilization resistance, cytocompatibility and mechanical properties were measured on samples with a simple geometry, but also on implant-abutment assemblies’ prototypes. Results show that the glassy alloy exhibits a quite high thermal stability, with a temperature range of 38 °C between the glass transition and crystallization, a compressive strength of 2 GPa, a certain plastic deformation (0.7%), a hardness of 5.5 GPa and a toughness of 56 MPa.√m. Moreover, the alloy shows a relatively lower Young’s modulus (96 GPa) than the Ti-6Al-4V alloy (110–115 GPa), which is beneficial to limit bone stress shielding. The BMG shows a satisfactory cytocompatibility, a high resistance to sterilization and a good corrosion resistance (corrosion potential of −0.07 V/SCE and corrosion current density of 6.0 nA/cm2), which may ensure its use as a biomaterial. Tests on dental implants reveal a load to failure 1.5-times higher than that of Ti-6Al-4V and a comparable fatigue limit. Moreover, implants could be machined and sandblasted by methods usually conducted for titanium implants, without significant degradation of their amorphous nature. All these properties place this metallic glass among a promising class of materials for mechanically-challenging applications such as dental implants. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate and compare the surface characteristics and initial bioactivity of ceria-stabilized zirconia/alumina nanocomposite (NANOZR) with those of yttria-stabilized zirconia (3Y-TZP) and pure titanium (CpTi) following the use of three surface modification methods; polishing, sandblasting/acid-etching (SB-E) and electrochemical deoxidation (ECD). Physical properties including surface morphology, chemical composition, X-ray diffraction, surface wettability, surface roughness, and hardness were measured. Osteoblast-like MC3T3-E1 cells were used to examine cell morphology and attachment to the surfaces of the materials. ECD treated NANOZR (NANOZR-E) showed a well-arranged, self-organized microporous surface structure with significantly low contact angles when compared with the other specimens ( p < 0.05). NANOZR-E also demonstrated a slight decrease in monoclinic phase content (−4.4 wt %). The morphology and attachment of MC3T3-E1 cells on NANOZR-E were similar to those on polished and SBE-treated CpTi surfaces. Higher cell affinity was observed on NANOZR-E when compared with ECD treated 3Y-TZP. The findings of this study indicate the effectiveness of the novel technique, ECD, in the formation of a microporous surface on NANOZR when compared with both CpTi and 3Y-TZP. Moreover, this method also appears to improve the biological activity of NANOZR during the initial stage. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2641-2652, 2017. [ABSTRACT FROM AUTHOR]

Wear properties of bulk metallic glasses (BMGs) are important for industrial applications as much as strength and ductility. Free volume of BMGs is a significant factor which decides wear mechanism and resistance. Increased free volume of a ZrAlNiCu BMG processed by high-pressure torsion (HPT) affected wear resistance under dry reciprocating conditions. Two- and three-body abrasive wear as well as the delamination of oxide layers simultaneously operated during the wear tests of both as-cast and HPT-processed BMG (HPT-BMG). However, the HPT- BMG had a larger area of the oxide layers on a worn surface compared to the as-cast BMG at the early stage of the wear tests. The increased free volume by the HPT process resulted in ductile plastic deformation, prohibited crack propagation, and delayed delamination of the oxide layers. Therefore, the HPT-BMG had thicker oxide layers, which acted as an adequate protection and increased wear properties of the Zr-based BMG. [ABSTRACT FROM AUTHOR]