Search

Canonical immunoassays rely on highly sensitive and specific capturing of circulating biomarkers by interacting biomolecular baits. In this frame, bioprobe immobilization in spatially discrete three-dimensional (3D) spots onto analytical surfaces by hydrogel encapsulation was shown to provide relevant advantages over conventional two-dimensional (2D) platforms. Yet, the broad application of 3D systems is still hampered by hurdles in matching their straightforward fabrication with optimal functional properties. Herein, we report on a composite hydrogel obtained by combining a self-assembling peptide (namely, Q3 peptide) with low-temperature gelling agarose that is proved to have simple and robust application in the fabrication of microdroplet arrays, overcoming hurdles and limitations commonly associated with 3D hydrogel assays. We demonstrate the real-case scenario feasibility of our 3D system in the profiling of Covid-19 patients' serum IgG immunoreactivity, which showed remarkably improved signal-to-noise ratio over canonical assays in the 2D format and exquisite specificity. Overall, the new two-component hydrogel widens the perspectives of hydrogel-based arrays and represents a step forward towards their routine use in analytical practices.

Bone defects caused by infection, tumor, trauma, and so on remain difficult to treat clinically. Bone tissue engineering (BTE) has great application prospect in promoting bone defect repair. Polycaprolactone (PCL) is a commonly used material for creating BTE scaffolds. In addition, self-assembling peptides (SAPs) can function as the extracellular matrix and promote osteogenesis and angiogenesis. In the work, a PCL scaffold was constructed by 3D printing, then integrated with bone marrow mesenchymal stem cells (BMSCs) and SAPs. The research aimed to assess the bone repair ability of PCL/BMSC/SAP implants. BMSC proliferation in PCL/SAP scaffolds was assessed via Cell Counting Kit-8. In vitro osteogenesis of BMSCs cultured in PCL/SAP scaffolds was assessed by alkaline phosphatase staining and activity assays. Enzyme-linked immunosorbent assays were also performed to detect the levels of osteogenic factors. The effects of BMSC-conditioned medium from 3D culture systems on the migration and angiogenesis of human umbilical vein endothelial cells (HUVECs) were assessed by scratch, transwell, and tube formation assays. After 8 weeks of in vivo transplantation, radiography and histology were used to evaluate bone regeneration, and immunohistochemistry staining was utilized to detect neovascularization. In vitro results demonstrated that PCL/SAP scaffolds promoted BMSC proliferation and osteogenesis compared to PCL scaffolds, and the PCL/BMSC/SAP conditional medium (CM) enhanced HUVEC migration and angiogenesis compared to the PCL/BMSC CM. In vivo results showed that, compared to the blank control, PCL, and PCL/BMSC groups, the PCL/BMSC/SAP group had significantly increased bone and blood vessel formation. Thus, the combination of BMSC-seeded 3D-printed PCL and SAPs can be an effective approach for treating bone defects. Impact statement Both polycaprolactone (PCL) and self-assembling peptides (SAPs) have been broadly applied in bone defect repair. However, the poor osteoinductivity of PCL and weak mechanical strength of SAPs have limited their clinical application. Here, a 3D-printed PCL scaffold was fabricated for seeding bone marrow mesenchymal stem cells (BMSCs), then combined with SAPs to construct a composite PCL/BMSC/SAP implant for treating the calvarial defect. We showed that transplantation of PCL/BMSC/SAP composite implants clearly promoted bone regeneration and neovascularization. To our knowledge, this is the first study to treat bone defects by combination of BMSC-seeded 3D-printed PCL and SAPs.

Objectives: To evaluate self-assembling peptides (SAP) for caries prevention and arrest in primary tooth enamel in vitro ., Materials and Methods: Overall, 180 extracted primary teeth were used. In the prevention experiment ( n = 20 samples per group), self-assembling peptide for prevention (SAPP), fluoride varnish/mouthwash (FV/FMW), casein-phosphopeptide amorphous-calcium phosphate (CPP-ACP), and nanohydroxyapatite (nHA) were applied. Samples were subjected to a demineralizing pH cycling for 14 days. In the arrest experiment ( n = 15/group), 60 samples were pre-demineralized; induced lesions were treated using self-assembling peptide for repair (SAPR), FV, CPP-ACP plus fluoride, and resin infiltration (RI) and submitted to pH cycling. Mineral loss and its differences as well as lesion depth were determined using transversal microradiography. Numerical data were tested for normality using Shapiro-Wilk's test and were compared using Kruskal-Wallis test followed by pairwise comparisons utilizing multiple Mann-Whitney U tests with Bonferroni correction. The significance level was set at P < 0.05 within all tests., Results: FV (median: -46.3 [interquartile range: 175.52] vol% × µm) and FMW (-33.35 [124.65] vol% × µm) prevented caries significantly more effectively than all other groups ( P < 0.001), which did not show significant preventive effects. RI (median: 4949.70 [1637.20] vol% × µm) and FV (median = 6076.05 [5190.08] vol% × µm) arrested lesions, whereas SAPR and CPP-ACPF did not show such arrest., Conclusions: FV and FMW showed the largest caries-preventive effect, whereas RI and FV arrested lesion progression in primary tooth enamel in vitro ., Competing Interests: The authors declare no conflict of interest, and the study has received no funding., (Copyright: © 2022 Journal of International Society of Preventive and Community Dentistry.)

Efficient protein and peptide expression and purification technologies are highly needed in biotechnology, especially in light of the increasing number of proteins and peptides that are being exploited for therapeutic use, which are inherently difficult to produce via biological means. In this chapter, we describe a facile, reliable, and cost-effective peptide production and purification strategy based on short self-assembling peptides (e.g., L 6 KD (LLLLLLKD)) and a C-terminal cleavage intein (e.g., Mtu ΔI-CM). This cleavable self-aggregating tag (cSAT) scheme depends on the in vivo formation of aggregates of the fusion protein containing the target peptide, which is induced during the expression by the presence of the self-assembling peptide in the construct. After a simple separation of the aggregates by centrifugation, the purified target peptide with authentic N-terminus is released in solution by pH-induced intein self-cleavage. As an example, a yield of about 4.4 μg/mg wet cell pellet was obtained when the cSAT scheme was used for the expression and purification of the therapeutic peptide GLP-1. This strategy provides a viable approach for preparing peptides with authentic N-termini, especially those in the range of 30 ~ 100 amino acids in size that are typically unstable or susceptible to degradation in Escherichia coli., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

Herein we report the impact of localized delivery of an anti-mouse PD-1-specific monoclonal antibody (aPD1) on Renca tumors in the resulting T cell responses and changes in broader immune gene expression profiles. Renca is a BALB/c mice syngeneic tumor that has been used to model human renal cell carcinoma In this study, T cell subsets were examined in tumors and draining lymph nodes of mice treated with localized PD-1 with and without the addition of adenosine deaminase (ADA), an enzyme that catabolizes adenosine (ADO), identified as an immune checkpoint in several types of human cancers. The biologics, aPD1, or aPD1 with adenosine deaminase (aPD1/ADA), were formulated with the self-assembling peptides Z15&#95;EAK to enhance retention near the tumor inoculation site. We found that both aPD1 and aPD1/ADA skewed the local immune milieu towards an immune stimulatory phenotype by reducing Tregs, increasing CD8 T cell infiltration, and upregulating IFNɣ. Analysis of tumor specimens using bulk RNA-Seq confirmed the impact of the localized aPD1 treatment and revealed differential gene expressions elicited by the loco-regional treatment. The effects of ADA and Z15&#95;EAK were limited to tumor growth delay and lymph node enlargement. These results support the notion of expanding the use of locoregional PD-1 blockade in solid tumors., Competing Interests: Conflict of Interest: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Self-assembling peptides (SAPs), which form hydrogels through physical cross-linking of soluble structures, are an intriguing class of materials that have been applied as tissue engineering scaffolds and drug delivery vehicles. For feasible application of these tissue mimetics via minimally invasive delivery, their bulk mechanical properties must be compatible with current delivery strategies. However, injectable SAPs which possess shear-thinning capacity, as well as the ability to reassemble after cessation of shearing can be technically challenging to generate. Many SAPs either clog the high-gauge needle/catheter at high concentration during delivery or are incapable of reassembly following delivery. In this chapter, we provide a detailed protocol for topological control of enzyme-responsive peptide-based hydrogels that enable the user to access both advantages. These materials are formulated as sterically constrained cyclic peptide progelators to temporarily disrupt self-assembly during injection-based delivery, which avoids issues with clogging of needles and catheters as well as nearby vasculature. Proteolytic cleavage by enzymes produced at the target tissue induces progelator linearization and hydrogelation. The scope of this approach is demonstrated by their ability to flow through a catheter without clogging and activated gelation upon exposure to target enzymes., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

Hydrogels based on marine natural biopolymers have extensive possibilities for application in regenerative medicine, being best fit from safety and toxicity point of view, inexpensive and commercially available materials for 3D tissue scaffold development. In this study a peptide fraction from the temperate sea cucumber species Parastichopus tremulus has been characterized by de novo sequencing. ORAC antioxidant activity of 0,35 ± 0,05 TE/μg protein; IC50 of 22% and capacity to self-assemble into transparent hydrogel under physiological conditions have been experimentally determined. 926 MALDI-TOF peptide sequences were identified to belong to four protein types on basis of homology with Apostichopus japonicus and sea urchin proteins – major yolk protein, non-skeletal actin, collagen, and cluster BSL78-belonging. The surface hydrophobicity, gelation, and cytotoxicity of the P. tremulus peptides were studied and 13 peptide sequences from the collagen group were predicted in silico to have auto-assembly capacity. In vitro activity guided, size exclusion- based isolation of antioxidant peptides from sea cucumber protein hydrolysate and their physicochemical and bioinformatic characterization. [Display omitted] • A peptide fraction from sea cucumber Parastichopus tremulus was sequenced de novo. • 926 sequences were identified by homology with A. japonicus and sea urchin proteins. • FR5 had ORAC antioxidant activity 0,35 ± 0,05 TE/μg protein and IC50 of 22%. • FR5 self-assembled into transparent hydrogel under physiological conditions. • 13 collagen peptides were predicted in silico to have auto-assembly capacity. [ABSTRACT FROM AUTHOR]

Hydrogel materials have been employed as biological scaffolds for tissue regeneration across a wide range of applications. Their versatility and biomimetic properties make them an optimal choice for treating the complex and delicate milieu of neural tissue damage. Aside from finely tailored hydrogel properties, which aim to mimic healthy physiological tissue, a minimally invasive delivery method is essential to prevent off-target and surgery-related complications. The specific class of injectable hydrogels termed self-assembling peptides (SAPs), provide an ideal combination of in situ polymerization combined with versatility for biofunctionlization, tunable physicochemical properties, and high cytocompatibility. This review identifies design criteria for neural scaffolds based upon key cellular interactions with the neural extracellular matrix (ECM), with emphasis on aspects that are reproducible in a biomaterial environment. Examples of the most recent SAPs and modification methods are presented, with a focus on biological, mechanical, and topographical cues. Furthermore, SAP electrical properties and methods to provide appropriate electrical and electrochemical cues are widely discussed, in light of the endogenous electrical activity of neural tissue as well as the clinical effectiveness of stimulation treatments. Recent applications of SAP materials in neural repair and electrical stimulation therapies are highlighted, identifying research gaps in the field of hydrogels for neural regeneration.

Naturally occurring food peptides are frequently used in the life sciences due to their beneficial effects through their impact on specific biochemical pathways. Furthermore, they are often leveraged for applications in areas as diverse as bioengineering, medicine, agriculture, and even fashion. However, progress toward understanding their self-assembling properties as functional materials are often hindered by their long aromatic and charged residue-enriched sequences encrypted in the parent protein sequence. In this study, we elucidate the nanostructure and the hierarchical self-assembly propensity of a lupin-derived peptide which belongs to the α-conglutin (11S globulin, legumin-like protein), with a straightforward N-terminal biotinylated oligoglycine tag-based methodology for controlling the nanostructures, biomechanics, and biological features. Extensive characterization was performed via Circular Dichroism (CD) spectroscopy, Fourier Transform Infrared spectroscopy (FT-IR), rheological measurements, and Atomic Force Microscopy (AFM) analyses. By using the biotin tag, we obtained a thixotropic lupin-derived peptide hydrogel (named BT13) with tunable mechanical properties (from 2 to 11 kPa), without impairing its spontaneous formation of β-sheet secondary structures. Lastly, we demonstrated that this hydrogel has antioxidant activity. Altogether, our findings address multiple challenges associated with the development of naturally occurring food peptide-based hydrogels, offering a new tool to both fine tune the mechanical properties and tailor the antioxidant activities, providing new research directions across food chemistry, biochemistry, and bioengineering. [ABSTRACT FROM AUTHOR]

Microgels are hydrogel particles with diameters in the micrometer scale that can be fabricated in different shapes and sizes. Microgels are increasingly used for biomedical applications and for biofabrication due to their interesting features, such as injectability, modularity, porosity and tunability in respect to size, shape and mechanical properties. Fabrication methods of microgels are divided into two categories, following a top-down or bottom-up approach. Each approach has its own advantages and disadvantages and requires certain sets of materials and equipments. In this review, we discuss fabrication methods of both top-down and bottom-up approaches and point to their advantages as well as their limitations, with more focus on the bottom-up approaches. In addition, the use of microgels for a variety of biomedical applications will be discussed, including microgels for the delivery of therapeutic agents and microgels as cell carriers for the fabrication of 3D bioprinted cell-laden constructs. Microgels made from well-defined synthetic materials with a focus on rationally designed ultrashort peptides are also discussed, because they have been demonstrated to serve as an attractive alternative to much less defined naturally derived materials. Here, we will emphasize the potential and properties of ultrashort self-assembling peptides related to microgels. [ABSTRACT FROM AUTHOR]

• Hyaluronic acid and IKVAV motif allow breast cancer cells to produce ECM. • Hyaluronic acid/IKVAV-based cultures may resemble the tumour microenvironment. • Electroporation efficiency is modulated by ECM and cell organization. Nowadays, electroporation (EP) represents a promising method for the intracellular delivery of anticancer drugs. To setting up the process, the EP efficiency is usually evaluated by using cell suspension and adherent cell cultures that are not representative of the in vivo conditions. Indeed, cells are surrounded by extracellular matrix (ECM) whose composition and physical characteristics are different for each tissue. So, various three-dimensional (3D) in vitro models, such as spheroids and hydrogel-based cultures, have been proposed to mimic the tumour microenvironment. Herein, a 3D breast cancer in vitro model has been proposed. HCC1954 cells were seeded on crosslinked and lyophilized matrices composed of hyaluronic acid (HA) and ionic complementary self-assembling peptides (SAPs) already known to provide a fibrous structure mimicking collagen network. Herein, SAPs were functionalized with laminin derived IKVAV adhesion motif. Cultures were characterized by spheroids surrounded by ECM produced by cancer cells as demonstrated by collagen1a1 and laminin B1 transcripts. EP was carried out on both 2D and 3D cultures: a sequence of 8 voltage pulses at 5 kHz with different amplitude was applied using a plate electrode. Cell sensitivity to EP seemed to be modulated by the presence of ECM and the different cell organization. Indeed, cells cultured on HA-IKVAV were more sensitive than those treated in 2D and HA cultures, in terms of both cell membrane permeabilization and viability. Collectively, our results suggest that HA-IKVAV cultures may represent an interesting model for EP studies. Further studies will be needed to elucidate the influence of ECM composition on EP efficiency. [ABSTRACT FROM AUTHOR]

Recombinant human bone morphogenetic proteins (BMPs) have shown clinical success in promoting bone healing, but they are also associated with unwanted side effects. The development of improved BMP carriers that can retain BMP at the defect site and maximize its efficacy would decrease the therapeutic BMP dose and thus improve its safety profile. In this review, we discuss the advantages of using self - assembling peptides , a class of synthetic supramolecular biomaterials, to deliver recombinant BMPs. Peptide amphiphiles (PAs) are a broad class of self-assembling peptides, and the use of PAs for BMP delivery and bone regeneration has been explored extensively over the past decade. Like many self-assembling peptide systems, PAs can be designed to form nanofibrous supramolecular biomaterials in which molecules are held together by non-covalent bonds. Chemical and biological functionality can be added to PA nanofibers, through conjugation of chemical moieties or biological epitopes to PA molecules. For example, PA nanofibers have been designed to bind heparan sulfate, a natural polysaccharide that is known to bind BMPs and potentiate their signal. Alternatively, PA nanofibers have been designed to synthetically mimic the structure and function of heparan sulfate, or to directly bind BMP specifically. In small animal models, these bio-inspired PA materials have shown the capacity to promote bone regeneration using BMP at doses 10–100 times lower than established therapeutic doses. These promising results have motivated further evaluation of PAs in large animal models, where their safety and efficacy must be established before clinical translation. We conclude with a discussion on the possiblity of combining PAs with other materials used in orthopaedic surgery to maximize their utility for clinical translation. • Recombinant bone morphogenetic proteins (BMPs) can promote bone healing. • High and possibly unsafe BMP doses are required for reliable efficacy. • Improved carriers for BMP delivery could lower the required BMP doses. • Self-assembling peptide amphiphiles (PAs) can bind BMP and potentiate its signal. • PAs can reduce the therapeutic BMP dose 10–100 times in animal models. [ABSTRACT FROM AUTHOR]

Background: Self-assembling peptides (TDMs) comprise synthetic amphipathic peptides that immediately react to changes in pH and/or inorganic salts to transform into a gelatinous state. The first generation of these peptides (TDM-621) is currently used as a hemostatic agent in Europe. However, TDM-621 exhibits slow gel-formation and low retention capabilities on tissue surfaces. The second generation (TDM-623) was therefore developed to encourage faster gel-formation and better tissue-sealing capabilities., Aim: The aim of this study was to verify the efficacy of TDM-623 in terms of its hemostatic effect in endoscopic surgery., Materials and Methods: Evaluation of the hemostatic effect in endoscopic surgery (animal study) was performed using eight porcine in spine position. Following systemic heparinization, we established a "bleeding model" by endoscopic grasping forceps on the anterior walls of the stomach and duodenum. In the hemostasis method, an endoscope with a distal hood was brought into contact with the bleeding point, and 1 ml TDM-623 was applied to the wound. After TDM-623 gelation, the endoscope was removed, and the acute hemostatic effect (after 2 min) was confirmed., Result: In the endoscopic bleeding model, 17 of the 23 cases (74%) showed complete hemostatic effects on the anterior wall of the stomach, and 18 of the 20 cases (80%) on the anterior wall of the duodenum, respectively. None of the applied gels were displaced from the anterior walls of the stomach and duodenum., Conclusion: The new self-assembling peptide (TDM-623) showed high hemostatic effects. TDM-623 had potential usefulness for upper gastrointestinal endoscopic surgery., Competing Interests: The authors declare that they have no conflict of interest., (© 2021 The Authors. DEN Open published by John Wiley & Sons Australia, Ltd on behalf of Japan Gastroenterological Endoscopy Society.)

Nerve guidance conduits with hollow lumen fail to regenerate critical-sized peripheral nerve defects (15 mm in rats and 25 mm in humans), which can be improved by a beneficial intraluminal microenvironment. However, individual cues provided by intraluminal filling materials are inadequate to eliminate the functional gap between regenerated nerves and normal nerves. Herein, an aligned fibrin/functionalized self-assembling peptide (AFG/fSAP) interpenetrating nanofiber hydrogel that exerting synergistic topographical and biochemical cues for peripheral nerve regeneration is constructed via electrospinning and molecular self-assembly. The hydrogel possesses an aligned structure, high water content, appropriate mechanical properties and suitable biodegradation capabilities for nerve repair, which enhances the alignment and neurotrophin secretion of primary Schwann cells (SCs) in vitro , and successfully bridges a 15-mm sciatic nerve gap in rats in vivo . The rats transplanted with the AFG/fSAP hydrogel exhibit satisfactory morphological and functional recovery in myelinated nerve fibers and innervated muscles. The motor function recovery facilitated by the AFG/fSAP hydrogel is comparable with that of autografts. Moreover, the AFG/fSAP hydrogel upregulates the regeneration-associated gene expression and activates the PI3K/Akt and MAPK signaling pathways in the regenerated nerve. Altogether, the AFG/fSAP hydrogel represents a promising approach for peripheral nerve repair through an integration of structural guidance and biochemical stimulation., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2021 The Authors.)

Self-assembling hydrogels are promising materials for regenerative medicine and tissue engineering. However, designing hydrogels that replicate the 3-4 order of magnitude variation in soft tissue mechanics remains a major challenge. Here hybrid hydrogels are investigated formed from short self-assembling β-fibril peptides, and the glycosaminoglycan chondroitin sulfate (CS), chosen to replicate physical aspects of proteoglycans, specifically natural aggrecan, which provides structural mechanics to soft tissues. Varying the peptide:CS compositional ratio (1:2, 1:10, or 1:20) can tune the mechanics of the gel by one to two orders of magnitude. In addition, it is demonstrated that at any fixed composition, the gel shear modulus can be tuned over approximately two orders of magnitude through varying the initial vortex mixing time. This tuneability arises due to changes in the mesoscale structure of the gel network (fibril width, length, and connectivity), giving rise to both shear-thickening and shear-thinning behavior. The resulting hydrogels range in shear elastic moduli from 0.14 to 220 kPa, mimicking the mechanical variability in a range of soft tissues. The high degree of discrete tuneability of composition and mechanics in these hydrogels makes them particularly promising for matching the chemical and mechanical requirements of different applications in tissue engineering and regenerative medicine., (© 2021 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

Protein fibrils characterized with a cross-β-sheet quaternary structure have gained interest as nanomaterials in biomedicine, including in the design of subunit vaccines. Recent studies have shown that by conjugating an antigenic determinant to a self-assembling β-peptide, the resulting supramolecular assemblies act as an antigen delivery system that potentiates the epitope-specific immune response. In this study, we used a ten-mer self-assembling sequence (I10) derived from an amyloidogenic peptide to biophysically and immunologically characterize a nanofibril-based vaccine against the influenza virus. The highly conserved epitope from the ectodomain of the matrix protein 2 (M2e) was elongated at the N-terminus of I10 by solid phase peptide synthesis. The chimeric M2e-I10 peptide readily self-assembled into unbranched, long, and twisted fibrils with a diameter between five and eight nm. These cross-β nanoassemblies were cytocompatible and activated the heterodimeric Toll-like receptor (TLR) 2/6. Upon mice subcutaneous immunization, M2e-fibrils triggered a robust anti-M2e specific immune response, which was dependent on self-assembly and did not require the use of an adjuvant. Overall, this study describes the efficacy of cross-β fibrils to activate the TLR 2/6 and to stimulate the epitope-specific immune response, supporting usage of these proteinaceous assemblies as a self-adjuvanted delivery system for antigens. [ABSTRACT FROM AUTHOR]

Self-assembling peptides (SAP) are ideal components for biomedical devices. However, their practical applications have been limited due to their intrinsic unstable, low-performance, and low-stress response given by non-covalent interactions involved in self-assembling. Herein, a library of SAPs featuring different self-assembled nanostructures was successfully cross-linked with genipin, allowing to produce nanofibrous hydrogels with enhanced mechanical properties (G ′ ≥ 0.2 MPa, stress-failure ≥ 3.5 kPa) and enhanced thermostability (≥100 °C) while maintaining their native nanoarchitecture. Cross-linking dramatically changed the optical properties of SAPs: it triggered new absorption/fluorescence bands in the visible spectral range, which are attributed to charge transfer between peptide chains. Genipin cross-linking, fitted for different classes of SAPs, could be a powerful tool to obtain biomimetic SAP scaffolds with tunable stiffness and thermostability. Lastly, because of the changed absorption/emission properties and relaxation kinetics of cross-linked SAPs, genipin cross-linking may bestow novel optical properties to several well-known lysine-containing SAPs, with intriguing potential for biomedical imaging, photonics and optoelectronics. Unlabelled Image • Genipin increases mechanical properties of various lysine-containing SAPs while maintaining their nanofibrous structure. • Cross-linking reaction does not involve the bioactive motifs, thus preserving the SAP biomimetic properties. • Cross-linking boosts SAP thermostability beyond 100°C. • Cross-linking reaction allows for charge transfer between cross-linked peptide chains. • Optical properties of cross-linked SAPs are changed showing absorption and fluorescence bands in the visible spectral range. [ABSTRACT FROM AUTHOR]

Supramolecular nanostructures formed through peptide self-assembly can have a wide range of applications in the biomedical landscape. However, they often lose biomechanical properties at low mechanical stress due to the non-covalent interactions working in the self-assembling process. Herein, we report the design of cross-linked self-assembling peptide hydrogels using a one-pot in situ gelation system, based on 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide/N-hydroxysulfosuccinimide (EDC/sulfo–NHS) coupling, to tune its biomechanics. EDC/sulfo–NHS coupling led to limited changes in storage modulus (from 0.9 to 2 kPa), but it significantly increased both the strain (from 6% to 60%) and failure stress (from 19 to 35 Pa) of peptide hydrogel without impairing the spontaneous formation of β-sheet-containing nano-filaments. Furthermore, EDC/sulfo–NHS cross-linking bestowed self-healing and thixotropic properties to the peptide hydrogel. Lastly, we demonstrated that this strategy can be used to incorporate bioactive functional motifs after self-assembly on pre-formed nanostructures by functionalizing an Ac-LDLKLDLKLDLK-CONH2 (LDLK12) self-assembling peptide with the phage display-derived KLPGWSG peptide involved in the modulation of neural stem cell proliferation and differentiation. The incorporation of a functional motif did not alter the peptide's secondary structure and its mechanical properties. The work reported here offers new tools to both fine tune the mechanical properties of and tailor the biomimetic properties of self-assembling peptide hydrogels while retaining their nanostructures, which is useful for tissue engineering and regenerative medicine applications. [ABSTRACT FROM AUTHOR]

Hydroxyapatite (HAP) coatings can improve the biocompatibility and bioactivity of titanium alloys, such as Ti6Al4V, commonly used as material for orthopedic prostheses. In this framework, we have studied the surface of HAP coatings enriched with Mg and either Si or Ti deposited by RF magnetron sputtering on Ti6Al4V. HAP coatings have been furtherly functionalized by adsorption of a self-assembling peptide (SAP) on the HAP surface, with the aim of increasing the material bioactivity. The selected SAP (peptide sequence AbuEAbuEAbuKAbuKAbuEAbuEAbuKAbuK) is a self-complementary oligopeptide able to generate extended ordered structures by self-assembling in watery solutions. Samples were prepared by incubation of the HAP coatings in SAP solutions and subsequently analyzed by X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) and Near Edge X-ray Absorption Fine Structure (NEXAFS) spectroscopies, in order to determine the amount of adsorbed peptide, the peptide stability and the structure of the peptide overlayer on the HAP coatings as a function of the HAP substrate and of the pH of the mother SAP solution. Experimental data yielded evidence of SAP adsorption on the HAP surface, and peptide overlayers showed ordered structure and molecular orientation. The thickness of the SAP overlayer depends on the composition of the HAP coating. [ABSTRACT FROM AUTHOR]

Hair follicle dermal papilla cells (HFDPC) are a specialized cell population located in the bulge of the hair follicle with unique characteristics such as aggregative behavior and the ability to induce new hair follicle formation. However, when expanded in conventional 2D monolayer culture, their hair inductive potency is rapidly lost. Different 3D culture techniques, including cell spheroid formation, have been described to restore, at least partially, their original phenotype, and therefore, their hair inductive ability once transplanted into a recipient skin. Moreover, hair follicle dermal papilla cells have been shown to differentiate into all mesenchymal lineages, but their differentiation potential has only been tested in 2D cultures. In the present work, we have cultured HFDPC in the 3D self-assembling peptide scaffold RAD16-I to test two different tissue engineering scenarios: restoration of HFDPC original phenotype after cell expansion and osteogenic and adipogenic differentiation. Experimental results showed that the 3D environment provided by RAD16-I allowed the restoration of HFDPC signature markers such as alkaline phosphatase, versican and corin. Moreover, RAD16-I supported, in the presence of chemical inductors, three-dimensional osteogenic and adipogenic differentiation. Altogether, this study suggests a potential 3D culture platform based on RAD16-I suitable for the culture, original phenotype recovery and differentiation of HFDPC. [ABSTRACT FROM AUTHOR]

Self-assembling peptides (SAPs) show great promise in regenerative medicine and beyond. Yet, their low mechanical rigidity and limited processability hinder many of their potential applications. In this work we describe the reinforcement of a synthetic biomimetic and β-sheet rich FAQRVPP-LDLK12 SAP by its integration with a naturally occurring polysaccharide - guar gum - to produce a shapeable and thermo-responsive composite hydrogel. Extensive characterization was performed via rheological measurements, CD spectroscopy, FT-IR spectroscopy, and AFM analyses. Composite hydrogels show preserved nanostructured morphology and cross-β structure aggregation typical of SAPs, improved mechanical properties (peaking at 1:1 weight ratio with G′~60 kPa) with self-healing and stress-relaxation propensities: they also exhibit reversible repeatable gel-sol transitions in response to thermal stimuli. Thanks to the dynamic properties of guar gum, stretchability was extended far beyond 5% strain of standard SAPs and processability allowed for the production of knotted threads and long (>10 cm) flexible sheets. Composite hydrogels of guar gum and SAPs may be added to the growing library of biomimetic SAP hydrogels used in 3D-printing, wound healing, suturing and beyond. Unlabelled Image • A synthetic biomimetic self-assembling peptide was reinforced through its integration with a naturally occurring polysaccharide guar Highlights should only consist of 125 characters per bullet point, including spaces. The highlights provided are too long; please edit them to meet the requirement. --> gum. • Composite hydrogel showed preserved nanostructured morphology and cross-β structure aggregation typical of SAPs. • Composite hydrogel showed improved mechanical properties (peaking at 1:1 weight ratio with G'~60 kPa) with self-healing propensity. • Composite hydrogel exhibited reversible gel-sol transitions in response to thermal stimuli. • Stretchability of composite hydrogel was extended well beyond 5% strain-limit, typical of standard SAPs. [ABSTRACT FROM AUTHOR]

EAK16-II (EAK) is a self-assembling peptide (SAP) that forms β-sheets and β-fibrils through ionic-complementary interactions at physiological ionic strengths. The soft materials can be injected in vivo, creating depots of drugs and cells for rendering pharmacological and biological actions. The scope of the applications of EAK is sought to extend to tissues through which the flow of extracellular fluid tends to be limited. In such anatomical locales the rate and extent of the fibrilization are limited insofar as drug delivery and cellular scaffolding would be impeded. A method is generated utilizing a carbodiimide cross-linker by which EAK fibrils are pre-assembled yet remain injectable soft materials. It is hypothesized that the resulting de novo covalent linkages enhance the stacking of the β-sheet bilayers, thereby increasing the lengths of the fibrils and the extent of their cross-linking, as evidenced in Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy, scanning electron microscopy, and atomic force microscopy analyses. The cross-linked EAK (clEAK) retains polymeric microspheres with an average diameter of 1 µm. Macrophages admixed with clEAK remain viable and do not produce the inflammatory mediator interleukin-1β. These results indicate that clEAK should be investigated further as a platform for delivering particles and cells in vivo., (© 2021 Wiley-VCH GmbH.)

Objective: The present systematic review was conducted to investigate the effect of the self-assembling peptide (SAP) - P 11 -4 in the remineralization of enamel caries., Material and Methods: The systematic search for studies was conducted through CINAHL, EMBASE, MEDLINE, Scopus, PsychINFO, and various key journals. This review was conducted in adherence to PRISMA standards and was registered in PROSPERO with registration number CRD42019110156. The methodological quality of the studies was graded through Cochrane's tool of risk of bias in non-randomized studies - of interventions (ROBINS-I)., Results: In total, 91 studies were identified for screening, and 12 studies were eligible. Ten studies showed effective enamel remineralization with P 11 -4 compared to controls. One study showed a combination of P 11 -4 with fluoride varnish or Casein Phosphopeptide-Amorphous Calcium Phosphate Fluoride (CPP-ACPF) leads to significantly higher remineralization compared to P 11 -4 alone. Quality assessment of study showed 6 (50%) studies as medium risk of bias and 6 (50%) studies as low risk of bias., Conclusion: To conclude, the present study results showed SAP- P 11 -4 is effective in the remineralization of enamel caries.

Activated microglia/macrophages infiltration, astrocyte migration, and increased production of inhibitory chondroitin sulfate proteoglycans (CSPGs) are standard harmful events taking place after the spinal cord injuries (SCI). The gliotic scar, viz. the outcome of chronic SCI, constitutes a long-lasting physical and chemical barrier to axonal regrowth. In the past two decades, various research groups targeted the hostile host microenvironments of the gliotic scar at the injury site. To this purpose, biomaterial scaffolds demonstrate to provide a promising potential for nervous cell restoration. We here focused our efforts on two self-assembling peptides (SAPs), featuring different self-assembled nanostructures, and on different methods of drug loading to exploit the neuroregenerative potential of Chondroitinase ABC (ChABC), a thermolabile pro-plastic agent attenuating the inhibitory action of CSPGs. Enzymatic activity of ChABC (usually lasting less than 72 hours in vitro) released from SAPs was remarkably detected up to 42 days in vitro. ChABC was continuously released in vitro from a few days to 42 days as well. Also, injections of ChABC loaded SAP hydrogels favored host neural regeneration and behavioral recovery in chronic SCI in rats. Hence, SAP hydrogels showed great promise for the delivery of Chondroitinase ABC in future therapies targeting chronic SCI., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Extracellular matrix (ECM) consists of proteins, proteoglycans, and different soluble molecules. ECM provides structural support to mammalian cells. ECM is responsible for important cell functions, as well as assembling cells into various tissues and organs, regulating growth and cell-cell interaction. Recent studies have shown the potential of nanostructured biomaterials to mimic native ECM. Developing tailor-made biomaterials that mimic the complex nanoscale mesh of local ECM is not a trivial endeavor: bio-inspired biomaterials are designed to supply a healthy ECMlike structure, capable of filling the lesion cavity, favoring transplanted cell engraftment, providing physical support to endogenous neurogenesis and also tuning the inflammatory response to protect spared neurons. The strategies used to manufacture biomimetic hydrogel scaffold represent particularly important prospects of novel therapies for CNS regeneration. During this review, we describe with details the most promising regulatory pathways from ECM involved in the CNS injury and regeneration and we draw a line to the biomimetic potential of engineered nanostructured biomaterials aimed at mimicking extracellular matrix constructs and favoring the release of pro-regenerative agents. Lastly, a brief overview of their application in clinical trials is provided., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Chronic wounds caused by diabetes are a significant medical challenge. Complications from non-healing can result in dire consequences for patients and cost the healthcare system billions of dollars annually. Non-healing in wounds for diabetic patient's results from a combination of factors which impair clearing of injured tissue, proliferation of healthy cell populations and increase risk of infection. Wound dressings continue to form the basis for the treatment of chronic wounds. Traditionally, these focused solely on hydration of the wound site and mitigating infection risk. Hydrogel systems are ready made to meet these basic requirements due to their intrinsic hydration properties and ability to deliver active ingredients. Flexibility in materials and methods of release allowed these systems to remain targets of research into the 21st century. Improved understanding of the wound environment and healing cascades has led to the development of more advanced systems which incorporate endogenous growth factors and living cells. Despite their promise, clinical efficacy of these systems has remained a challenge. Further, the regulatory pathways for approval add a layer of complexity to translate pre-clinical work into marketed products. In this review, we discuss systems currently in clinical use, pre-clinical directions and regulatory challenges for hydrogels in the treatment of diabetic chronic wounds., Competing Interests: Conflict of Interest The authors declare no conflicts of interest.

Peptide nanofibers are useful for many biological applications, including immunotherapy, tissue engineering, and drug delivery. The robust lengthwise assembly of these peptides into nanofibers is typically difficult to control, resulting in polydisperse fiber lengths and an incomplete understanding of how nanofiber length affects biological responses. Here, rationally designed capping peptides control the length of helical peptide nanofibers with unique precision. These designed peptides bind the tips of elongated nanofibers to shorten and narrow their length distributions. Demonstrating their use as immunotherapies, capped nanofibers are preferentially cross-presented by dendritic cells compared to uncapped nanofibers. Due to increased cross-presentation, these capped nanofibers trigger stronger CD8 + T-cell responses in mice than uncapped nanofibers. This strategy illustrates a means for controlling the length of supramolecular peptide nanofibers to modulate their immunogenicity in the context of immunotherapies., (© 2020 Wiley-VCH GmbH.)

Introduction: Cell-based tissue engineering is a promising method for dentin-pulp complex (DPC) regeneration. The challenges associated with DPC regeneration include the generation of a suitable microenvironment that facilitates the complete odontogenic differentiation of dental pulp stem cells (DPSCs) and the rapid induction of angiogenesis. Thus, the survival and subsequent differentiation of DPSCs are limited. Extracellular matrix (ECM)-like biomimetic hydrogels composed of self-assembling peptides (SAPs) were developed to provide an appropriate microenvironment for DPSCs. For functional DPC regeneration, the most important considerations are to provide an environment that promotes the adequate attachment of DPSCs and rapid vascularization of the regenerating pulp. Morphogenic signals in the form of growth factors (GFs) have been incorporated into SAPs to promote productive DPSC behaviors. However, the use of GFs has several drawbacks. We envision using a scaffold with SAPs coupled with long-term factors to increase DPSC attachment and vascularization as a method to address this challenge., Methods: In this study, we developed synthetic material for an SAP-based scaffold with RGD- and vascular endothelial growth factor (VEGF)-mimetic peptide epitopes with the dual functions of dentin and pulp regeneration. DPSCs and human umbilical vein endothelial cells (HUVECs) were used to evaluate the biological effects of SAP-based scaffolds. Furthermore, the pulpotomized molar rat model was employed to test the reparative and regenerative effects of SAP-based scaffolds., Results: This scaffold simultaneously presented RGD- and VEGF-mimetic peptide epitopes and provided a 3D microenvironment for DPSCs. DPSCs grown on this composite scaffold exhibited significantly improved survival and angiogenic and odontogenic differentiation in the multifunctionalized group in vitro. Histological and functional evaluations of a partially pulpotomized rat model revealed that the multifunctionalized scaffold was superior to other options with respect to stimulating pulp recovery and dentin regeneration in vivo., Conclusion: Based on our data obtained with the functionalized SAP scaffold, a 3D microenvironment that supports stem cell adhesion and angiogenesis was generated that has great potential for dental pulp tissue engineering and regeneration., Competing Interests: The authors report no conflicts of interest for this work., (© 2020 Xia et al.)

Taxol has been clinically approved as an antitumor drug, and it exerts its antitumor effect through the excessive stabilization of microtubules in cancer cells. Recently, moderate microtubule stabilization by Taxol has been shown to efficiently promote neurite regeneration and functional recovery after spinal cord injury (SCI). However, the potential for the clinical translation of Taxol in treating SCI is limited by its side effects and low ability to cross the blood-spinal cord barrier (BSCB). Self-assembled peptide hydrogels have shown potential as drug carriers for the local delivery of therapeutic agents. We therefore hypothesized that the localized delivery of Taxol by a self-assembled peptide scaffold would promote axonal regeneration by stabilizing microtubules during the treatment of SCI. In the present study, the mechanistic functions of the Taxol-releasing system were clarified in vitro and in vivo using immunofluorescence labeling, histology and neurobehavioral analyses. Based on the findings from the in vitro study, Taxol released from a biological functionalized SAP nanofiber scaffold (FGLmx/Taxol) remained active and promoted neurite extension. In this study, we used a weight-drop contusion model to induce SCI at T9. The local delivery of Taxol from FGLmx/Taxol significantly decreased glial scarring and increased the number of nerve fibers compared with the use of FGLmx and 5% glucose. Furthermore, animals administered FGLmx/Taxol exhibited neurite preservation, smaller cavity dimensions, and decreased inflammation and demyelination. Thus, the local delivery of Taxol from FGLmx/Taxol was effective at promoting recovery after SCI and has potential as a new therapeutic strategy for SCI., (Copyright © 2020 Xiao, Yao, Wang, Tian, Wang, Gu, Li, Zheng and Wu.)

Neural stem cells-based therapies have shown great potential for central nervous system regeneration, with three-dimensional (3D) culture systems representing a key technique for tissue engineering applications, as well as disease modeling and drug screenings. Self-assembling peptides (SAPs), providing biomimetic synthetic micro-environments regulating cellular functionality and tissue repair, constitute a suitable tool for the production of complex tissue-like structures in vitro . However, one of the most important drawbacks in 3D cultures, obtained via animal-derived substrates and serum-rich media, is the reproducibility and tunability of a standardized methodology capable to coax neural differentiation of different human cell lines. In this work we cultured four distinct human neural stem cell (hNSC) lines in 3D synthetic multifunctionalized hydrogel (named HYDROSAP) for up to 6 weeks. Three-dimensional cultures of differentiating hNSCs exhibited a progressive differentiation and maturation over time. All hNSCs-derived neurons in 3D culture system exhibited randomly organized entangled networks with increasing expression of GABAergic and glutamatergic phenotypes and presence of cholinergic ones. Oligodendrocytes formed insulating myelin sheaths positive for myelin basic protein (MBP). In summary, results demonstrated a successfully standardized and reproducible 3D cell culture system for hNSC differentiation and maturation in serum-free conditions useful for future therapies., (Copyright © 2020 Marchini, Favoino and Gelain.)