Search

CuF2-mediated selective C-S coupling of 1,4-disubstituted 1,2,3-triazole halides using the widely available DMSO as the methylthiolation reagent were achieved through the chelation of N(2) atom in triazole ring. The ortho- C-halogen bond in N(1) aryl was selectively coupled, while other C-halogen bonds remained, generating 1,4- disubstituted 1,2,3-triazoles bearing aryl methyl thioether fragment.

Although engineered blood vessels have seen important advances during recent years, proper mechanical strength and vasoactivity remain unsolved problems. In the current study, micropatterned fibrous mats were created to load smooth muscle cells (SMC), and a co-culture with endothelial cells (EC) was established through overlaying on an EC-loaded flat fibrous mat to mimic the layered structure of a blood vessel. A preferential distribution of SMC was determined in the patterned regions throughout the fibrous scaffolds, and aligned fibers in the patterned regions provided topological cues to guide the orientation of SMC with intense actin filaments and extracellular matrix (ECM) production in a circumferential direction. Plasmid DNA encoding basic fibroblast growth factors and vascular endothelial growth factor were integrated into electrospun fibers as biological cues to promote SMC infiltration into fibrous mats, and the viability and ECM production of both EC and SMC. The layered fibrous mats with loaded EC and SMC were wrapped into a cylinder, and engineered vessels were obtained with compact EC and SMC layers after co-culture for 3 months. Randomly oriented ECM productions of EC formed a continuous endothelium covering the entire lumenal surface, and a high alignment of ECM was shown in the circumferential direction of SMC layers. The tensile strength, strain at failure and suture retention strength were higher than those of the human femoral artery, and the burst pressure and radial compliance were in the same range as the human saphenous vein, indicating potential as blood vessel substitutes for transplantation in vivo. Thus, the establishment of topographical cues and biochemical signals in fibrous scaffolds demonstrates advantages in modulating cellular behavior and organization found in complex multicellular tissues.

The present study was conducted to investigate the effects of dietary acidolysis-oxidized konjac glucomannan (A-OKGM) (0%, 0.4%, 0.8%, and 1.6%) supplementation on the immunity and expression of immune-related genes in Schizothorax prenanti. After feeding for eight weeks, the serum and guts were used for measurement of biochemical parameters, and immune-related gene expression in the gut were also analyzed by real-time quantitative polymerase chain reaction (RT-qPCR). C-reactive protein and IgM levels were significantly higher in the A-OKGM fed groups than in the control group, regardless of the dosage. The 0.4% and 1.6% A-OKGM groups showed significant up-regulation of tumor necrosis factor α (TNFα) in the anterior gut. The 0.8% and 1.6% A-OKGM groups also showed significantly enhanced TNFα expression in the mid- and distal guts. Interleukin-1β (IL-1β) expression in the anterior gut of fish fed with 0.4% and 1.6% A-OKGM diets was significantly enhanced. The 0.8% and 1.6% A-OKGM diets resulted in significantly increased the expression of IL-1β in the distal gut. Similarly, the interleukin-6 (IL-6) messenger RNA (mRNA) levels in the 0.4% and 1.6% diet groups were significantly higher in the anterior gut. The 0.8% and 1.6% A-OKGM diet groups showed significant induction of IL-6 gene expression in the distal gut. A-OKGM modified from KGM can act as an immunostimulant to enhance the immunity of S. prenanti.

Cinnamaldehyde (CA) was successfully encapsulated in β-cyclodextrin (β-CD), and polylactic acid (PLA)-based composite fibers were prepared by incorporating CA/β-CD via electrospinning. Morphological, structural, spectral, and antibacterial properties of different weight ratios of PLA:β-CD/CA (88:12, 94:6, 97:3, and 98.5:1.5) and PLA/CA/β-CD fibers were investigated. PLA and CA/β-CD were incorporated by mixing of CA/β-CD inclusions to enhance the viscosity of the mixed solution. The mechanical properties and hydrophilicity of nanofibers were improved following the addition of CA/β-CD. Moreover, CA/β-CD improved the antibacterial activities of the mixture against Escherichia coli and Staphylococcus aureus. PLA/CA/β-CD-3 exhibited excellent antibacterial effects and low cytotoxicity. Thus, our study showed that PLA/CA/β-CD fibers may have applications as wound dressing materials and for use in other biomedical applications.

This paper presents the fabrication of a molecularly imprinted, polymer-based disposable electrochemical sensor for paraoxon (PO) determination. The sensor was based on a screen-printed carbon electrode (SPCE) modified with a surface molecularly imprinted poly (p-aminothiophenol) (PATP)/gold nanoparticles (AuNPs) composite film, which consisted of a PATP outer layer and an AuNPs inner layer. We report a novel strategy, combining surface molecularly imprinting and self-assembly directed electro-polymerization with high densely imprinting PO molecules in the PATP/AuNPs film. Firstly, AuNPs were in situ electrodeposited at the electrode surface, and then assembled with electropolmerizable functional monomer p-aminothiophenol (ATP). Subsequently, PO molecules were assembled onto the ATP monolayer-modified AuNPs, forming a basis of surface molecular imprinting. After that, replenished PO molecules were embedded in the PATP/AuNPs film by PO and the ATP molecular self-assembly directed electro-polymerization in the polymerization precursor mixture. The resulting imprinted PATP/AuNPs/SPCE possesses high sensitivity, affinity, and selectivity toward PO, with a low detection limit of 1 × 10−9 M. The proposed sensor was successfully applied for the determination of PO in fruit and vegetables, giving satisfactory recoveries. The strategy reported herein can be further expected to fabricate various molecular imprinted sensors for the determination of other pesticide residuals.

Collagens were extracted from the scales and skin of Ctenopharyngodon idella (C. idella) as raw materials using an acid-enzyme hybrid method. The structural properties of the extracted collagens were compared using ultraviolet-visible spectrophotometry, Fourier transform infrared spectroscopy, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and differential scanning calorimetry. Additionally, the in vitro self-aggregation behaviors of the two types of collagens (fish skin- and scale-derived collagens) were compared using turbidimetric assays, aggregation assays, and scanning electron microscopy (SEM). The results showed that both types of extracted collagen were typical type I collagen with two α chains and intact triple-helical structures. The denaturation temperatures of the collagens from fish scales and skin were 34.99°C and 39.75°C, respectively. Both types of collagens were capable of self-aggregation in neutral salt solution at 30°C, with aggregation degrees of 28% and 27.33% for the scale and skin collagens, respectively. SEM analysis revealed that both types of collagens could self-aggregate into interwoven fibers, and the fish scale-derived collagen had a more pronounced reticular fiber structure with a striped periodic D-band pattern of collagen fibrils, whereas the collagen fibers from the self-aggregation of fish skin-derived collagen had a certain degree of disruption without any D-band pattern.

In vitro drug screening using reliable and predictable liver models remains a challenge. The identification of an ideal biological substrate is essential to maintain hepatocyte functions during in vitro culture. Here, we developed a fiber-embedded polydimethylsiloxane (PDMS) chip to culture hepatocytes. Hepatocyte spheroids formed in this device were subjected to different flow rates, of which a flow rate of 50 μL/min provided the optimal microenvironment for spheroid formation, maintained significantly higher rates of albumin and urea synthesis, yielded higher CYP3A1 (cytochrome P450 3A1) and CYP2C11 (cytochrome P450 2C11) enzyme activities for metabolism, and demonstrated higher expression levels of liver-specific genes. In vitro metabolism tests on tolbutamide and testosterone by hepatocytes indicated predicted clearance rates of 1.98 ± 0.43 and 40.80 ± 10.13 mL/min/kg, respectively, which showed a good in vitro–in vivo correspondence. These results indicate that this system provides a strategy for the construction of functional engineered liver tissue that can be used to study drug metabolism.

The spatial arrangement of cardiac myocytes (CMs) and other non-myocytes scaffolds, closely resembling native tissue, is essential to control the CM morphology and function for cardiac tissue regeneration. In the current study, micropatterned fibrous scaffolds were developed to establish a CM co-culture system with cardiac fibroblasts (CFs) and endothelial cells (ECs) as a potential in vitro drug screening model. To pursue a biomimetic approach to influence CM behaviors, strip, oval and wave-patterned mats were constructed by deposition of electrospun fibers on lithographic collectors, followed by precise stacking for cell co-cultures. CMs, CFs, and ECs were located on the patterned scaffolds with controlled cellular distribution in the respective regions and no across condition was found. Compared with those after strip and oval-patterned co-culture, CMs co-cultured on wave-patterned scaffolds displayed significantly greater cell viabilities, larger cell elongation ratios, stronger expressions of cardiac-specific Troponin I, connexin 43 and sarcomeric α-actinin and higher beating rates during 15 days of incubation. The responses of co-cultured CMs to quinidine, erythromycin and sotalol show good correlations with clinical observations in the beating rate and the prolongation of the contraction and relaxation time. The in vivo safety data reflected well with the concentrations for 50% of maximal effect (EC50) after drug treatment on co-cultured CMs, which was determined from the changes in the corrected field potential duration (FPDc) against the drug concentrations. During 15 days of patterned co-culture, the interbeat intervals and fluctuations of the CMs indicated quick changes in response to haloperidol treatment and sufficient restoration of the original beating profiles after drug removal. This study demonstrates the capabilities of micropatterned co-culture of CMs to establish the cardiac function as a reproducible and reliable platform for screening cardiac side effects of drugs.

To investigate the non-aldehyde volatile profile resulting from deep-fat frying, volatile compounds formed during the processes of heating soybean oil (SO), frying wheat dough (WD), and frying chicken breast meat (CBM) were comparatively studied. By using gas chromatography-mass spectrometry and internal standard method, alkanes, alkenes, alkynes, alcohols, ketones, nitrogen-containing volatiles (NCVs), and other volatiles were qualitatively and relatively quantitatively detected. NCVs were detected only in CBM-fried oil samples. Some volatiles (e.g. 2-pentylfuran and 2-pentylpyridine) were observed to increase in concentration, whereas others (e.g. 4-methyl-1,4-heptadiene and 7-methyl-3,4-octadiene) were observed to first increase and then decrease in concentration as the heating or frying time increased. Reduced quantity and concentrations of volatiles were observed in the food-fried oil samples which might be related to the intensified reactions induced by food components. The detection of some harmful volatiles in considerable concentrations indicated further attention might be paid to the safety of deep-fat frying.

Fibrous scaffolds with different ratios of poly (lactic acid) (PLA) and chitosan were fabricated by conventional electrospinning. After crosslinking by the glutaraldehyde vapor, the structure, mechanical properties, hydrophilicity, and in-fiber chemical interactions of the scaffolds were investigated. We found that the fiber diameter decreased with the concentration of chitosan, while mechanical properties and hydrophilicity improved. In addition, we found that scaffolds with aligned fibers have higher mechanical strength and biocompatibility than scaffolds with randomly oriented fibers. In particular, scaffolds with aligned fibers with PLA:chitosan ratios of 7:1 was found to support cardiomyocyte viability, elicit cell elongation, and enhance production of sarcomeric α-actinin and troponin I. Collectively, the data indicate that composite scaffolds consisting of PLA/chitosan fibers have great potential for engineering cardiac tissue, and for accelerating the regeneration of myocardia.

The effective manipulation of skyrmion motion by magnetic field gradients introduces the technological possibility with skyrmion as information carriers for spintronic applications. Recent studies indicate that the skyrmion Hall effect can be suppressed in a synthetic antiferromagnetic (SAF) multilayer structure driven by a spin polarized current. In this paper, an analytical model based on Thiele equation is developed to describe the properties of a skyrmion pair in a SAF structure driven by a magnetic field gradient. Combining the analytical solutions with the micromagnetic simulation results, we demonstrate the essential dynamic features of the skyrmion pair as a function of AF coupling and magnetic field gradients, revealing that the skyrmion pair motion could be suppressed by increasing the interlayer antiferromagnetic coupling.

A major challenge in vascular engineering is the establishment of proper microenvironment to guide the spatial organization, growth, and extracellular matrix (ECM) productions of cells found in blood vessels. In the current study, micropatterned fibrous mats with distinct ridges and grooves of different width were created to load smooth muscle cells (SMCs), which were assembled by stacking on vascular endothelial cell (EC)-loaded flat fibrous mats to mimic the in vivo-like organized structure of blood vessels. SMCs were mainly distributed in the ridges, and aligned fibers in the patterned regions led to the formation of elongated cell bodies, intense actin filaments, and expressions of collagen I and α-smooth muscle actin in a parallel direction with fibers. ECs spread over the flat fibrous mats and expressed collagen IV and laminin with a cobblestone-like feature. A z-stack scanning of fluorescently stained fibrous mats indicated that SMCs effectively infiltrated into fibrous scaffolds at the depth of around 200 μm. Compared with SMCs cultured alone, the coculture with ECs enhanced the proliferation, infiltration, and cytoskeleton elongation of SMCs on patterned fibrous mats. Although the coculture of SMCs made no significant difference in the EC growth, the coculture system on patterned fibrous scaffolds promoted ECM productions of both ECs and SMCs. Thus, this patterned fibrous configuration not only offers a promising technology in the design of tissue engineering scaffolds to construct blood vessels with durable mechanical properties, but also provides a platform for patterned coculture to investigate cell-matrix and cell-cell interactions in highly organized tissues.

An active polyvinyl alcohol (PVA) composite film incorporating pomegranate peel extract (PPE) and sodium dehydroacetate (SD) was prepared by electrospinning. The effects of the ratio of PPE to SD (1:0, 1:0.5, 1:1, 0.5:1, 0:1) in a consistent total mass fraction of ∼5% in the film forming solution were measured in terms of the physical properties, appearance, oxidation resistance, and antibacterial performance of the resulting films. When the ratio of PPE to SD was 1:1, the powder was uniformly dispersed throughout the film, and no obvious aggregation was observed via scanning electron microscopy. The results show that the addition of PPE and SD to PVA film can improve its elongation at break, but has no significant effect on its light transmission or water vapor permeability. Fourier transform infrared spectroscopy indicated that the interaction between PPE, SD, and PVA is complex. The addition of PPE to the film specimens resulted in obvious antioxidant activity. The results of bacteriostatic experiments showed that the antibacterial ability of the film against E. coli and S. aureus increased with increasing PPE and SD. This study thus quantifies the benefits of incorporating PPE and SD into PVA films for potential application as active packaging films or coatings.

We extracted collagen (CL) from the scales of Ctenopharyngodon idella and fabricated a CL self-assembly film. Catalase (CAT) was immobilized on the films using cross-linking, adsorption, and embedding methods. The activity and operational stability of immobilized CAT were investigated, along with the influence of the concentration of glutaraldehyde (GTA) and of the initial concentration of embedded CAT. The results showed that the CL triple helix remained intact. Differential scanning calorimetry data showed that the thermal stability of CL was significantly improved by neutral salt-induced self-aggregation and GTA cross-linking. The immobilized enzyme had high activity and good operational stability. When the enzyme concentration reached 0.5 mg/mL, immobilized enzyme activity of grass carp scales reached a maximum of 2596 U/g, and after twenty-two uses, enzyme activity remained above 50%, and it could be reused >45 times (CAT = 0.5 mg/mL, GTA = 5%, Temperature = 30 °C, pH = 7). Moreover, the optimum temperature and pH of immobilized CAT were 35 °C and 7, respectively, while the same for free CAT was 30 °C and 7, respectively. This indicated that immobilization of CAT has a protective effect.

Nanofibrous composite membranes consisting of polyvinyl alcohol (PVA), graphene oxide (GO), and zinc oxide nanoparticles (ZnO NPs) were prepared by and ultrasonic processing, and electrospinning. The performance of the membranes containing different GO-to-ZnO NP mass ratios was comprehensively investigated in terms of density, mechanical properties, water vapor permeability, optical property, biodegradability and antimicrobial properties. The results showed that an appropriate sonication time (30 min) improved the membrane performance; the composite nanofibrous membrane with a GO-to-ZnO NP mass ratio of 3:7 and 30 min sonication exhibited the best performance with a water vapor permeability of (0.62 ± 0.01) × 10−2 g·h−1 m−2 pa−1, and strain and stress values of 307.84 ± 2.96% and 12.82 ± 0.56 MPa, respectively. Particularly, the UV barrier property of the composite nanofibrous membrane was enhanced. Furthermore, the membrane exhibited strong antibacterial activity against foodborne pathogenic and spoilage bacteria. Thu, it can thus be used as an active food packaging material to ensure the safety of food products and to extend their shelf-life.

We report a comprehensive study of annealing treatment modulation on the laser-induced ultrafast magnetic behaviors in antiferromagnetically exchange-coupled [Ni/Co]4/Ru/[Co/Ni]3 multilayers with perpendicular magnetic anisotropy (PMA). Magnetic hysteresis loops indicate that the uniaxial PMA field Hkeff decreases monotonously with the increase in annealing temperature Ta, but the variation of interlayer coupling field Hex is rather complicated. Time-resolved magnetic-optical Kerr effect (MOKE) measurements demonstrate that the laser-excited demagnetization and precession process relies significantly on Ta. Upon laser impulsion, the MOKE signal immediately shows a nonchanging transient increase and decrease with H increasing for low Ta, but only the ultrafast decreasing behavior for high Ta. From the subsequent dynamic precession spectra, the optical and acoustic precession modes are identified. By fitting the field-dependent frequency curves via the deduced dispersion relations, both Hkeff and Hex are determined and their variation trends agree well with the results from the static magnetic measurement. Moreover, it is found that the critical field where the ultrafast signal decrease occurs is dependent on the co-effect of Hkeff and Hex, whereas the maximum field at which the optical mode precession disappears shares the same trend as Hex. The magnetic damping of acoustic mode is seen to increase with Ta due to the increased inhomogeneities. Our findings provide a deep understanding of the magnetic properties in synthetic antiferromagnetic multilayers with high annealing temperatures, which will be helpful for designing advanced spintronic devices.

We present an overview in the understanding of spin-transfer torque (STT) induced magnetization dynamics in spin-torque nano-oscillator (STNO) devices. The STNO contains an in-plane (IP) magnetized free layer and an out-of-plane (OP) magnetized spin polarizing layer. After a brief introduction, we first use mesoscopic micromagnetic simulations, which are based on the Landau–Lifshitz–Gilbert equation including the STT effect, to specify how a spin-torque term may tune the magnetization precession orbits of the free layer, showing that the oscillator frequency is proportional to the current density and the z-component of the free layer magnetization. Next, we propose a pendulum-like model within the macrospin approximation to describe the dynamic properties in such type of STNOs. After that, we further show the procession dynamics of the STNOs excited by IP and OP dual spin-polarizers. Both the numerical simulations and analytical theory indicate that the precession frequency is linearly proportional to the spin-torque of the OP polarizer only and is irrelevant to the spin-torque of the IP polarizer. Finally, a promising approach of coordinate transformation from the laboratory frame to the rotation frame is introduced, by which the nonstationary OP magnetization precession process is therefore transformed into the stationary process in the rotation frame. Through this method, a promising digital frequency shift-key modulation technique is presented, in which the magnetization precession can be well controlled at a given orbit as well as its precession frequency can be tuned with the co-action of spin polarized current and magnetic field (or electric field) pulses.

Ultrafast demagnetization excited by laser pulses introduces the technological possibility for controlling the magnetic properties of materials on sub-picosecond regime. In this paper, the demagnetization dynamics of amorphous ferrimagnetic TbFeCo alloy is modeled by using the stochastic Landau-Lifshitz-Gilbert equation on an atomistic level. The transition metal (Fe, Co) and rare earth (Tb) atoms are constructed by two different sub-lattice systems. Laser-heating induced demagnetization processes are clearly demonstrated by a series of snapshots. Our simulations show that full demagnetization on the sub-picosecond time scale requires a temperature over the Curie point, and the demagnetization time increases with the Tb content.

Arabinoxylan was thought to have the potential to change lipid metabolism and redox homeostasis in human and animal. However, the effect of arabinoxylan on the liver damage induced by high-fat diet needs further exploiting.Six-weeks-old 30 male Sprague-Dawley Rats were assigned randomly to three groups (n = 10 per group), i.e. a control diet (CON) group, a high-fat diet (HF) group and a high-fat diet supplemented with arabinoxylan (6% AX, HF-AX) group. Results showed that final body weight and liver weight were similar in CON group and HF-AX group, but higher in the HF group. In serum, the HF-AX group showed lower triglyceride concentrations than did the HF group. In liver, higher lipoprotein lipase, hepatic lipase, total lipase, and acyl-CoA oxidase activities and lower triglyceride and cholesterol level were observed in the HF-AX group than in the HF group. For the redox homeostasis, arabinoxylan supplemented in HF increased T-SOD activity and GSH-PX activity and reduced MDA + 4-HNE level in liver and/or compared with those in the HF group. Lipid droplets and liver cell damage were observed in the HF group compared with the CON and HF-AX groups.Arabinoxylan could improve lipid metabolic disorder and alleviate liver damage in rats induced by high-fat diet via activating lipid catabolism and suppressing lipid peroxidation. © 2017 Society of Chemical Industry.

A facile and efficient method for the regioselective acetoxylation of 1-benzyl 1,2,3-triazoles through C–H bond activation was developed. Cu(OAc)2 and 1,2,3-triazole were applied as catalyst and elegant directing group, respectively, to convert aromatic C–H bonds directly into highly regioselective C–O bonds. The conversion can result in the synthesis of 1,2,3-triazoles bearing acetoxyl groups.

As a traditional soybean product with good quality and a healthy food with many functional components, tofu is increasingly consumed in people's daily life. Traditional tofu processing consists of numerous steps, including the soaking and grinding of soybean seeds, heating of the soybean slurry, filtering, and addition of coagulants, and others. The properties of soybean seeds, processing scale, soaking and heating conditions, type and concentration of coagulant, and other factors collectively impact the processing steps and the final tofu quality. The generation of whole soybean tofu with more nutritive value comparing with traditional tofu has been successfully reported by several studies. As one of the most important functional component, isoflavones and their presence in tofu are also influenced by the above-mentioned factors, which influence the nutritive value of tofu. Research investigating the influence of tofu processing conditions on the quality and isoflavone profiles of tofu are the subject of this review. Issues that should be further studied to investigate the influence of processing conditions on the quality and nutritive value of tofu are also introduced.

A new method to integrate poly-dl-lactide (PLA) patterned electrospun fibers with a polydimethylsiloxane (PDMS) microfluidic chip was successfully developed via lithography. Hepatocyte behavior under static and dynamic conditions was investigated. Immunohistochemical analyses indicated good hepatocyte survival under the dynamic culture system with effective hepatocyte spheroid formation in the patterned microfluidic chip vs. static culture conditions and tissue culture plate (TCP). In particular, hepatocytes seeded in this microfluidic chip under a flow rate of 10 μL/min could re-establish hepatocyte polarity to support biliary excretion and were able to maintain high levels of albumin and urea secretion over 15 days. Furthermore, the optimized system could produce sensitive and consistent responses to nano-Ag-induced hepatotoxicity during culture. Thus, this microfluidic chip device provides a new means of fabricating complex liver tissue-engineered scaffolds, and may be of considerable utility in the toxicity screening of nanoparticles.

Recent experiments performed in current-driven nano-contacts with strong perpendicular anisotropy have shown that spin-transfer torque can drive self-localized spin waves [1, 2] that above a certain threshold intensity can condense into a highly nonlinear magnetodynamic and nano-sized state known as a magnetic droplet soliton [3]. Here we demonstrate analytically, numerically, and experimentally that at sufficiently large driving currents, and for a spin polarization that is tilted away from the film normal, the circular droplet soliton can become unstable to periodic excitations of its perimeter. We furthermore show that these perimeter excitation modes (PEMs) are parametrically excited when the fundamental droplet soliton precession frequency is close to twice the frequency of one or more of the PEMs. As a consequence, for increasing applied fields, progressively higher PEMs can be excited. Quantitative agreement with experiment confirms this picture., Submitted to PRB

In this paper, the biosynthesis process of phenolic compounds in plants is summarized, which includes the shikimate, pentose phosphate and phenylpropanoid pathways. Plant phenolic compounds can act as antioxidants, structural polymers (lignin), attractants (flavonoids and carotenoids), UV screens (flavonoids), signal compounds (salicylic acid and flavonoids) and defense response chemicals (tannins and phytoalexins). From a human physiological standpoint, phenolic compounds are vital in defense responses, such as anti-aging, anti-inflammatory, antioxidant and anti-proliferative activities. Therefore, it is beneficial to eat such plant foods that have a high antioxidant compound content, which will cut down the incidence of certain chronic diseases, for instance diabetes, cancers and cardiovascular diseases, through the management of oxidative stress. Furthermore, berries and other fruits with low-amylase and high-glucosidase inhibitory activities could be regarded as candidate food items in the control of the early stages of hyperglycemia associated with type 2 diabetes.

A spin-torque nanopillar oscillator (STNO) that combines a perpendicular-to-plane polarizer (PERP) with an in-plane magnetized free layer is a good candidate for phase locking, which opens a potential approach to enhancement of the output power of STNOs. In this paper, the magnetic dipolar coupling effect is used as the driving force to synchronize two STNOs. We develop an approximation theory for synchronizing two identical and nonidentical pairs of PERP STNOs, by which the critical current of synchronization, dipolar coupling strength, phase-locking transient time, and frequency can be analytically predicted. These predictions are further confirmed by macrospin and micromagnetic simulations. Finally, we show the phase diagrams of the phase locking as a function of applied current and separation between two STNOs.

We demonstrate how magnetic droplet soliton pairs, nucleated by two separated nano-contact (NC) spin torque oscillators, can merge into a single droplet soliton. A detailed description of the magnetization dynamics of this merger process is obtained by micromagnetic simulations: A droplet pair with a steady-state in-phase spin precession is generated through the spin-transfer torque effect underneath two separate NCs, followed by a gradual expansion of the droplets volume and the out phase of magnetization on the inner side of the two droplets, resulting in the droplets merging into a larger droplet. This merger occurs only when the NC separation is smaller than a critical value. A transient breathing mode is observed before the merged droplet stabilizes into a steady precession state. The precession frequency of the merged droplet is lower than that of the droplet pair, consistent with its larger size. Merged droplets can again break up into droplet pairs at high enough magnetic field with a strong hysteretic response., Comment: accepted by Physical Review B

Magnetization orientation of a nanoscale ferromagnet can be manipulated by an electric current via spin-transfer torque (STT) effect, which holds great promise in the applications of non-volatile magnetic random access memory (MRAM) and spintorque oscillators. We review the fundamental mechanism and experimental progress of the STT effect. Then, different formula of STT torque has been classified, which can be added to the conventional Landau-Lifshitz-Gilbert equation. After that, we show some simulation results that mainly concern the STT-driven vortex dynamics, magnetization oscillations excited by a perpendicular polarizer, and the detail dynamics by in-plane and out-of-plane dual spin polarizers.

In situ grown composite fibers of hydroxyapatite (HA) and poly(dl-lactide) with uniaxial distribution were deposited layer-by-layer followed by hot pressing to obtain fibrous composites. The tribological profiles were clarified at low amplitude oscillatory motion as potential orthopedic implants. The inoculation of HA nanoparticles into fibrous composites lowered the coefficients of friction (COFs) and wear rates, and the hardness of HA layers and rolling effect of HA particles further improved the wear resistance. The COFs and wear rates were significantly lower when fretting along the fiber orientation than those when the slide direction was perpendicular to the fiber alignment.

Biodegradable polymers containing acid-labile segments and galactose grafts were formulated into nanoparticles in current study, and enhanced cellular uptake and subcellular distribution were clarified. Quantum dots (QDs) was utilized as an imaging agent and a model of bioactive substances, and entrapped into nanoparticles of around 200 nm through a nanoprecipitation process. The acid-labile characteristics of QDs-loaded nanoparticles were approved by the hemolysis capability, the degradation behaviors of matrix polymers, and the fluorescence decay of entrapped QDs after incubation into buffer solutions of different pH values. The galactose grafts increased the acid-lability, due to the hydrophilic moieties on the acid-labile segments, and enhanced uptake efficiency of over 50 % was found after 4 h incubation with HepG2 cells, due to the galactose-receptor mediated endocytosis. The acid-lability led to an efficient endosomal escape of QDs-loaded nanoparticles into cytoplasm. The integration of acid-lability, targeting effect, and full biodegradable backbone into nanoparticle matrices constitutes a promising platform for intracellular delivery of bioactive substances for disease diagnosis, imaging and treatment.

Challenges remain in the generation of heterogeneous tissues and the repairing of interfacial tissue between soft and hard tissues. The development of tissue engineering scaffolds with gradients in composition, structure, mechanical and chemical properties is essential to modulate cellular behaviors in a graded way and potentially support the growth of functionally graded tissues. Integrated with the three-dimensional (3-D) nanofibrous skeletal structure of native extracellular matrix, electrospun fibers with gradients in amino groups were generated in the current study through an aminolysis process by using a microinfusion pump. Gelatin grafts were constructed to create fibrous scaffolds with gradients in hydroxyapatite (HA) contents, crystal size and mechanical properties through in situ mineralization. Plasmid DNA (pDNA) was included during the mineralization process, and gradations in pDNA loading contents were created on fibrous scaffolds on the basis of HA gradients. Obvious gradients in cell density, osteoblastic differentiation and collagen deposition were demonstrated along the long axis of fibrous mats after cell seeding. Gradients in the amount of pDNA released and the expression of target proteins were indicated on the fibrous mats, which offered a temporally and spatially controlled delivery of growth factors in scaffolds. The creation of gradient futures on 3-D fibrous scaffolds may provide physical, chemical and biological cues and result in efficient regeneration of tissues with spatial distributions of the cell proliferation, differentiation, and matrix secretion.

The integration mode and release modulation of growth factors inside the scaffolds represent major challenges for inductive tissue regeneration. The integration of the bioaffinity of heparin with growth factors and the biomimicry of electrospun fibrous network to extracellular matrices is expected to efficiently bind and gradually release growth factors. Functional ketone groups were incorporated into poly( dl -lactide) backbone through copolymerization with functional e-caprolactone-based monomers. Heparin molecules were conjugated on the fiber surface up to 112.4 ± 3.2 ng/cm 2 , and recombinant basic fibroblast growth factor (bFGF) was loaded onto heparinized fibers up to 96.3 ± 4.7 ng/mg scaffold. The release profiles of bFGF were modulated by the heparin conjugation densities and the molecular weights of heparin conjugated. Higher release rates were found after incubation bFGF-loaded fibers in cell culture media and with NIH3T3 cells than that in buffer solutions. The gradual release of bFGF stimulated the cell growth and collagen secretion for over 21 d, which were more significant for fibrous mats conjugated with heparin of higher density and molecular weights. It is indicated that a novel strategy to fabricate growth factors-loaded fibrous scaffolds has been developed to manipulate desired signals at effective levels within local tissue microenvironment.

In order to evaluate effects of extraction techniques on the physicochemical characteristics and antioxidant activities of kiwifruit polysaccharides (KPS), and further explore KPS as functional food ingredients, both microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were optimized for the extraction of KPS. Furthermore, the physicochemical structures and antioxidant activities of KPS extracted by different techniques were investigated. The optimal extraction conditions of UAE and MAE for the extraction of KPS were obtained by response surface methodology. Different extraction techniques significantly affected the contents of uronic acids, molecular weights, molar ratios of constituent monosaccharides, and the degree of esterification of KPS. Results showed that KPS exhibited remarkable DPPH and ABTS radical scavenging activities, and reducing power. The high antioxidant activities observed in KPS extracted by the MAE method (KPS-M) might be partially attributed to its low molecular weight and high content of unmethylated galacturonic acid. Results suggested that the MAE method could be a good potential technique for the extraction of KPS with high antioxidant activity, and KPS could be further explored as functional food ingredients.

Spin-torque excited ferromagnetic resonance (ST-FMR) performed in nanoscale devices can be used to characterize material properties and optimize spintronic devices for applications. In this paper, micromagnetic simulation is employed to study the FMR property in a nano-ring shaped magnetic tunnel junction. The simulation predictions are confirmed by experiments, revealing that two resonance states (mode-1 and mode-2) with different resonance frequencies are excited by a microwave frequency current or magnetic field. The relatively weak response signal of FMR at the negative field can be attributed to the intrinsic asymmetric structure of magnetic tunnel junctions, which leads to a bias-dependent asymmetric spin transfer torque. Besides, high-order harmonics with two and three times the fundamental frequencies of the mode-1 and mode-2 are also observed.

Laser-induced magnetization switching in GdFe ferrimagnets strongly depends on the pulse duration. To gain insight into the ferrimagnetic switching process, Landau–Lifshitz–Gilbert (LLG) spin dynamic modeling is performed at an atomistic-level with two sub-lattice systems. The switching dynamics triggered by laser pulses can be considered as two stages: Demagnetization stage by the laser pulse heating and re-magnetization at the cooling down stage after the pulse impulsion. By tuning the laser pulse duration, the intensity of demagnetization can be well controlled, by which the subsequent magnetization switching during the cooling process can be obtained. The simulation results indicate that the occurrence of the transient ferromagnetic-like (TFL) state is necessary during the magnetization switching process. Furthermore, the thermal temperature and heating time play an important role for the ferrimagnetic switching. In the overheating region, the random switching behavior appears because the TFL state is uncontrollable.

Synchronization of spin-torque nano-oscillators (STNOs) by magnetic dipolar interactions in a parallel electrical connection (PC) introduces the technological possibility for an enhancement of output signal. In this study, we consider two identical or nonidentical STNOs in serial electrical connection (SC). By using a pendulum-like approximation model, we analytically predict the dipolar coupling strength, critical current and frequency of phase-locking precession. The numerical calculations of those analytical expressions are confirmed by macrospin simulations, revealing that the dipolar coupling strength responsible for the phase-locking in SC case is three times larger than that in the PC case for the two STNOs with the same separation, which results in the enlarged and symmetric phase-locking window of frequency versus current. These results suggest that the SC of multiple STNOs could be more promising for the enhancement of output power.

The ferromagnetic thin-film elements can be prepared to form a ?diamond? remanent state that contains two vortices with opposite circulation and with the same or opposite core polarities. The vortex polarity could influence their normal modes through the magnetostatic interactions between two vortices. In this paper, micromagnetic simulations, combined with Fourier techniques, are employed to study the spin-wave (SW) modes excited in a submicron Permalloy ellipse with a vortex pair configuration. After the application of an inplane Gaussian field pulse, it is found that a series of azimuthal SW modes is excited and the high-order harmonics of SW modes are strongly dependent of the core polarities due to the dynamic magnetic interactions between the two vortices.

Reliable manipulation of magnetic droplets is of immense importance for their applications in spin torque oscillators. Using micromagnetic simulations, we find that the antiphase precession state, which originates in the dynamic dipolar interaction effect, is a favorable stable state for two magnetic droplets nucleated at two identical nano-contacts. A magnetic field pulse can be used to destroy their stability and merge them into a big droplet. The merging process strongly depends on the pulse width as well as the pulse strength.

The liver is the major organ of importance to determine drug dispositions in the body, thus the development of hepatocyte culture systems is of great scientific and practical interests to provide reliable and predictable models for in vitro drug screening. In the current study, to address the challenges of a rapid function loss of primary hepatocytes, the coculture of hepatocytes with fibroblasts and endothelial cells (Hep-Fib-EC) was established on micropatterned fibrous scaffolds. Liver-specific functions, such as the albumin secretion and urea synthesis, were well maintained in the coculture system, accompanied by a rapid formation of multicellular hepatocyte spheroids. The activities of phase I (CYP3A11 and CYP2C9) and phase II enzymes indicated a gradual increase for cocultured hepatocytes, and a maximum level was achieved after 5 days and maintained throughout 15 days of culture. The metabolism testing on model drugs indicated that the scaled clearance rates for hepatocytes in the Hep-Fib-EC coculture system were significantly higher than those of other culture methods, and a linear regression analysis indicated good correlations between the observed data of rats and in vitro predicted values during 15 days of culture. In addition, the enzyme activities and drug clearance rates of hepatocytes in the Hep-Fib-EC coculture model experienced sensitive responsiveness to the inducers and inhibitors of metabolizing enzymes. These results demonstrated the feasibility of micropatterned coculture of hepatocytes as a potential in vitro testing model for the prediction of in vivo drug metabolism.

Effective manipulation of magnetization orientation driven by electric field in a perpendicularly magnetized tunnel junction introduces technologically relevant possibility for developing low power magnetic memories. However, the bipolar orientation characteristic of toggle-like magnetization switching possesses intrinsic difficulties for practical applications. By including both the in-plane (T//) and field-like (T⊥) spin-transfer torque terms in the Landau-Lifshitz-Gilbert simulation, reliable and deterministic magnetization reversal can be achieved at a significantly reduced current density of 5×109 A/m2 under the co-action of electric field and spin-polarized current, provided that the electric-field pulse duration exceeds a certain critical value τc. The required critical τc decreases with the increase of T⊥ strength because stronger T⊥ can make the finally stabilized out-of-plane component of magnetization stay in a larger negative value. The power consumption for such kind of deterministic magnetization switching is found to be two orders of magnitude lower than that of the switching driven by current only.

Magnetic fields generated by current lines are the standard way of switching between resistance (R) states in magnetic random access memories. A less common but technologically more interesting alternative to achieve R-switching is to use an electrical current crossing the tunnel barrier. Such current induced magnetization switching (CIMS) or current induced switching (CIS) effects were recently observed in thin magnetic tunnel junctions, and attributed to spin transfer (CIMS) or electromigration of atoms into the insulator (CIS). In this work, electromigration-driven resistance changes (resistive switching) are superimposed with thermally induced pinned layer reversal (magnetic switching), producing a reproducible, three-state memory device. The tunnel junctions under study show a tunnel magnetoresistance of 14% with a RA product of 50 �µ m 2 . The reversible electromigration-driven resistance changes amount to 7–8% of the full resistance change and more than 10 4 R-switching events can be current induced without significant damage to the tunnel junction. Typical critical current densities are of the order of 2 × 10 6 Ac m −2 .

Magnetic skyrmions are topologically protected nanoscale objects, which are promising building blocks for novel magnetic and spintronic devices. Here, we investigate the dynamics of a skyrmion driven by a spin wave in a magnetic nanowire. It is found that (i) the skyrmion is first accelerated and then decelerated exponentially; (ii) it can turn L-corners with both right and left turns; and (iii) it always turns left (right) when the skyrmion number is positive (negative) in the T- and Y-junctions. Our results will be the basis of skyrmionic devices driven by a spin wave., Comment: 10 pages, 7 figures