Search

Cell-free massive MIMO and symbiotic radio are promising beyond 5G (B5G) networking architecture and transmission technology, respectively. This paper studies cell-free symbiotic radio systems, where a number of distributed access points (APs) cooperatively send primary information to a receiver, and simultaneously support the backscattering communication of the secondary backscatter device (BD). An efficient two-phase uplink-training based channel estimation method is proposed to estimate the direct-link channel and cascaded backscatter channel, and the achievable primary and secondary communication rates taking into account the channel estimation errors are derived. Furthermore, to achieve a flexible trade-off between the primary and secondary communication rates, we propose a low-complexity weighted-maximal-ratio transmission (weighted-MRT) beamforming scheme, which only requires local processing at each AP without having to exchange the estimated channel state information. Simulation results are provided to show the impact of the channel training lengths on the performance of the cell-free symbiotic radio systems., Comment: 6 pages, 3 figures, conference

Intelligent reflecting surface (IRS) is a promising technology for wireless communications, thanks to its potential capability to engineer the radio environment. However, in practice, such an envisaged benefit is attainable only when the passive IRS is of a sufficiently large size, for which the conventional uniform plane wave (UPW)-based channel model may become inaccurate. In this paper, we pursue a new channel modelling and performance analysis for wireless communications with extremely large-scale IRS (XL-IRS). By taking into account the variations in signal's amplitude and projected aperture across different reflecting elements, we derive both lower- and upper-bounds of the received signal-to-noise ratio (SNR) for the general uniform planar array (UPA)-based XL-IRS. Our results reveal that, instead of scaling quadratically with the increased number of reflecting elements M as in the conventional UPW model, the SNR under the more practically applicable non-UPW model increases with M only with a diminishing return and gets saturated eventually. To gain more insights, we further study the special case of uniform linear array (ULA)-based XL-IRS, for which a closed-form SNR expression in terms of the IRS size and transmitter/receiver location is derived. This result shows that the SNR mainly depends on the two geometric angles formed by the transmitter/receiver locations with the IRS, as well as the boundary points of the IRS. Numerical results validate our analysis and demonstrate the importance of proper channel modelling for wireless communications aided by XL-IRS., Comment: 6 pages, 5 figures, conference

Symbiotic radio is a promising technology to achieve spectrum- and energy-efficient wireless communications, where the secondary backscatter device (BD) leverages not only the spectrum but also the power of the primary signals for its own information transmission. In return, the primary communication link can be enhanced by the additional multipaths created by the BD. This is known as the mutualism relationship of symbiotic radio. However, as the backscattering link is much weaker than the direct link due to double attenuations, the improvement of the primary link brought by one single BD is extremely limited. To address this issue and enable full mutualism of symbiotic radio, in this paper, we study symbiotic radio with massive number of BDs. For symbiotic radio multiple access channel (MAC) with successive interference cancellation (SIC), we first derive the achievable rate of both the primary and secondary communications, based on which a receive beamforming optimization problem is formulated and solved. Furthermore, considering the asymptotic regime of massive number of BDs, closed-form expressions are derived for the primary and the secondary communication rates, both of which are shown to be increasing functions of the number of BDs. This thus demonstrates that the mutualism relationship of symbiotic radio can be fully exploited with massive BD access.

Mobile communication networks were designed to mainly support ubiquitous wireless communications, yet they are expected to also achieve radio sensing capabilities in the near future. Most prior studies on radar sensing focus on distant targets, which usually rely on far-field assumption with uniform plane wave (UPW) models. However, with ever-increasing antenna size, together with the growing need to also sense nearby targets, the far-field assumption may become invalid. This paper studies radar sensing with extremely large-scale (XL) antenna arrays, where a generic model that takes into account both spherical wavefront and amplitude variations across array elements is developed. Furthermore, new closed-form expressions of the sensing signal-to-noise ratios (SNRs) are derived for both XL-MIMO radar and XL-phased-array radar modes. Our results reveal that different from the conventional UPW model where the SNR scales linearly and unboundedly with N for MIMO radar and with MN for phased-array radar, with M and N being the transmit and receive antenna numbers, respectively, more practical SNR scaling laws are obtained. For XL-phased-array radar with optimal power allocation, the SNR increases with M and N with diminishing returns, governed by new parameters called the transmit and receive angular spans. On the other hand, for XL-MIMO radar, while the same SNR scaling as XL-phased-array radar is obeyed for N, the SNR first increases and then decreases with M.

Wireless communications with extremely large-scale array (XL-array) correspond to systems whose antenna sizes are so large that conventional modelling assumptions, such as uniform plane wave (UPW) impingement, are longer valid. This paper studies the mathematical modelling and performance analysis of XL-array communications. By deviating from the conventional modelling approach that treats the array elements as sizeless points, we explicitly model their physical area/aperture, which enables a unified modelling for the classical discrete antenna arrays and the emerging continuous surfaces. As such, a generic array/surface model that accurately takes into account the variations of signal phase, amplitude and projected aperture across array elements is proposed. Based on the proposed model, a closed-form expression of the resulting SNR with the optimal single-user MRC/MRT beamforming is derived. The expression reveals that instead of scaling linearly with the antenna number M as in conventional UPW modelling, the SNR with the more generic model increases with M with diminishing return, which is governed by the collective properties of the array, such as the array occupation ratio and the physical sizes of the array along each dimension, while irrespective of the properties of the individual array element. Additionally, we have derived an alternative insightful expression for the optimal SNR in terms of the vertical and horizontal angular spans. Furthermore, we also show that our derived results include the far-field UPW modelling as a special case. One important finding during the study of far-field approximation is the necessity to introduce a new distance criterion to complement the classical Rayleigh distance, termed uniform-power distance (UPD), which concerns the signal amplitude/power variations across array elements, instead of phase variations as for Rayleigh distance., Comment: 15 pages, 13 figures

Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhance the UAV-ground communication performance, while UAV-mounted IRS is employed to assist in the terrestrial communication. We present their promising application scenarios, new communication design issues as well as potential solutions. In particular, we show that it is practically beneficial to deploy both the terrestrial and aerial IRSs in future wireless networks to reap the benefits of smart reflections in three-dimensional (3D) space., Comment: In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages

Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communication system is expected to achieve enormous transmission rate, provided that the transmit and receive beams are properly aligned with the MIMO channel. However, existing beam alignment techniques rely on either channel estimation or beam sweeping, which incur prohibitively high training overhead, especially for future wireless systems with further increased antenna dimensions and more stringent requirement on cost-effective hardware architectures. In this paper, we propose a new beam alignment technique, which is environment-aware and training-free, by utilizing the emerging concept of channel knowledge map (CKM), together with the user location information that is readily available in contemporary wireless systems. CKM is a site-specific database, tagged with the transmitter/receiver locations, which contains useful channel information to facilitate or even obviate real-time channel state information (CSI) acquistion. Two instances of CKM are proposed for beam alignment in mmWave massive MIMO systems, namely channel path map (CPM) and beam index map (BIM). It is shown that compared with existing training-based beam alignment schemes, the proposed CKM-enabled environment-aware beam alignment is able to drastically improve the effective communication rate, even with moderate user location errors, thanks to its significant saving of the prohibitive training overhead.

Achieving high-rate communication with accurate localization and wireless environment sensing has emerged as an important trend of beyond-fifth and sixth generation cellular systems. Extension of the antenna array to an extremely large scale is a potential technology for achieving such goals. However, the super massive operating antennas significantly increases the computational complexity of the system. Motivated by the inherent advantages of lens antenna arrays in reducing system complexity, we consider communication and localization problems with an \uline{ex}tremely large \uline{lens} antenna array, which we call "ExLens". Since radiative near-field property emerges in the setting, we derive the closed-form array response of the lens antenna array with spherical wave, which includes the array response obtained on the basis of uniform plane wave as a special case. Our derivation result reveals a window effect for energy focusing property of ExLens, which indicates that ExLens has great potential in position sensing and multi-user communication. We also propose an effective method for location and channel parameters estimation, which is able to achieve the localization performance close to the Cram\'{e}r-Rao lower bound. Finally, we examine the multi-user communication performance of ExLens that serves coexisting near-field and far-field users. Numerical results demonstrate the effectiveness of the proposed channel estimation method and show that ExLens with a minimum mean square error receiver achieves significant spectral efficiency gains and complexity-and-cost reductions compared with a uniform linear array., Comment: Paper accepted for publication in IEEE Transactions on Wireless Communications

Extremely large-scale multiple-input multiple-output (XL-MIMO) communications correspond to systems whose antenna size is so large that conventional assumptions, such as uniform plane wave (UPW) impingement, are no longer valid. This paper studies the channel modelling and performance analysis of XL-MIMO communication based on the generic spherical wavefront propagation model. First, for the single-user uplink/downlink communication with the optimal maximum ratio combining/transmission (MRC/MRT), we rigorously derive a new closed-form expression for the resulting signal-to-noise ratio (SNR), which includes the conventional SNR expression based on UPW assumption as a special case. Our result shows that instead of scaling linearly with the base station (BS) antenna number $M$, the SNR with the more generic spherical wavefront model increases with $M$ with diminishing return, governed by a new parameter called angular span. One important finding from our derivation is the necessity to introduce a new distance criterion, termed critical distance, to complement the classical Rayleigh distance for separating the near- and far-field propagation regions. While Rayleigh distance is based on the phase difference across array elements and hence depends on the electrical size of the antenna, the critical distance cares about the amplitude/power difference and only depends on its physical size. We then extend the study to the multi-user XL-MIMO communication system, for which we demonstrate that inter-user interference (IUI) can be mitigated not just by angle separation, but also by distance separation along the same direction. This offers one new degree of freedom (DoF) for interference suppression with XL-MIMO., Comment: 6 pages, 8 figures

Due to the advancements in cellular technologies and the dense deployment of cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the fifth-generation (5G) and beyond cellular networks is a promising solution to achieve safe UAV operation as well as enabling diversified applications with mission-specific payload data delivery. In particular, 5G networks need to support three typical usage scenarios, namely, enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine-type communications (mMTC). On the one hand, UAVs can be leveraged as cost-effective aerial platforms to provide ground users with enhanced communication services by exploiting their high cruising altitude and controllable maneuverability in three-dimensional (3D) space. On the other hand, providing such communication services simultaneously for both UAV and ground users poses new challenges due to the need for ubiquitous 3D signal coverage as well as the strong air-ground network interference. Besides the requirement of high-performance wireless communications, the ability to support effective and efficient sensing as well as network intelligence is also essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting aerial and ground users. In this paper, we provide a comprehensive overview of the latest research efforts on integrating UAVs into cellular networks, with an emphasis on how to exploit advanced techniques (e.g., intelligent reflecting surface, short packet transmission, energy harvesting, joint communication and radar sensing, and edge intelligence) to meet the diversified service requirements of next-generation wireless systems. Moreover, we highlight important directions for further investigation in future work., Comment: Accepted by IEEE JSAC

This paper proposes a new three-dimensional (3D) wireless passive relaying system enabled by aerial IRS (AIRS). Compared to the conventional terrestrial IRS, AIRS enjoys more deployment flexibility as well as wider-range signal reflection, thanks to its high altitude and thus more likelihood of establishing line-of-sight (LoS) links with ground source/destination nodes. Specifically, we aim to maximize the worst-case signal-to-noise ratio (SNR) over all locations in a target area by jointly optimizing the transmit beamforming for the source node and the placement as well as 3D passive beamforming for the AIRS. The formulated problem is non-convex and thus difficult to solve. To gain useful insights, we first consider the special case of maximizing the SNR at a given target location, for which the optimal solution is obtained in closed-form. The result shows that the optimal horizontal AIRS placement only depends on the ratio between the source-destination distance and the AIRS altitude. Then for the general case of AIRS-enabled area coverage, we propose an efficient solution by decoupling the AIRS passive beamforming design to maximize the worst-case array gain, from its placement optimization by balancing the resulting angular span and the cascaded channel path loss. Our proposed solution is based on a novel 3D beam broadening and flattening technique, where the passive array of the AIRS is divided into sub-arrays of appropriate size, and their phase shifts are designed to form a flattened beam pattern with adjustable beamwidth catering to the size of the coverage area. Both the uniform linear array (ULA)-based and uniform planar array (UPA)-based AIRSs are considered in our design, which enable two-dimensional (2D) and 3D passive beamforming, respectively. Numerical results show that the proposed designs achieve significant performance gains over the benchmark schemes., Comment: 16 pages

This article proposes the concept of channel knowledge map (CKM) as an enabler towards environment-aware wireless communications. CKM is a site-specific database, tagged with the locations of the transmitters and/or receivers, that contains whatever channel-related information useful to enhance environmental-awareness and facilitate or even obviate sophisticated real-time channel state information (CSI) acquisition. Therefore, CKM is expected to play an important role for 6G networks targeting for super high capacity, extremely low latency, and ultra-massive connectivity, by offering potential solutions to practical challenges brought by the drastically increased channel dimensions and training overhead. In this article, the motivations of environmental-awareness enabled by CKM are firstly discussed, followed by the key techniques to build and utilize CKM. In particular, it is highlighted that CKM is especially appealing for four channel types: channels for yet-to-reach locations, channels for non-cooperative nodes, channels with large dimensions, and channels with severe hardware/processing limitations. Two case studies with extensive numerical results are presented to demonstrate the great potential of environment-aware communications enabled by CKM.

Unmanned aerial vehicle (UAV) communications have attracted significant attention from both academia and industry. To facilitate the large-scale usage of UAVs for various applications in practice, we provide a comprehensive survey on the prototype and experiment for UAV communications. To this end, we first provide an overview on the general architecture of the prototype and experiment for UAV communications, and then present experimental verification for air-to-ground channel models and UAV energy consumption models. Next, we discuss measurement experiments on two promising paradigms of UAV communications, namely cellular-connected UAVs and UAV-enabled aerial communication platforms. For the former, we focus on the feasibility study and address the interference mitigation issue. For UAV-enabled aerial communication platforms, we present three scenarios, namely UAV-enabled aerial base stations, UAV-enabled aerial relays and UAV-enabled aerial data collection/dissemination. Finally, we point out some promising future directions for prototype and experimental measurements for UAV communications., Comment: 24 pages, 6 figures

While the 5G cellular system is being deployed worldwide, researchers have started the investigation of the 6G mobile communication networks. Although the essential requirements and key usage scenarios of 6G are yet to be defined, it is believed that 6G should be able to provide intelligent and ubiquitous wireless connectivity with Tbps data rate and sub-millisecond latency over 3D network coverage. To achieve such goals, acquiring accurate location information of the mobile terminals is becoming extremely useful, not only for location-based services but also for improving wireless communication performance in various ways such as channel estimation, beam alignment, medium access control, routing, and network optimization. On the other hand, the advancement of communication technologies also brings new opportunities to greatly improve the localization performance, as exemplified by the anticipated centimeter-level localization accuracy in 6G by ultra massive MIMO and mmWave technologies. In this regard, a unified study on integrated localization and communication (ILAC) is necessary to unlock the full potential of wireless networks for the best utilization of network infrastructure and radio resources for dual purposes. While there are extensive literatures on wireless localization or communications separately, the research on ILAC is still in its infancy. Therefore, this article aims to give a tutorial overview on ILAC towards 6G wireless networks. After a holistic survey on wireless localization basics, we present the state-of-the-art results on how wireless localization and communication inter-play with each other in various network layers, together with the main architectures and techniques for localization and communication co-design in current 2D and future 3D networks with aerial-ground integration. Finally, we outline some promising future research directions for ILAC., Comment: 35 pages, 18 figures

This paper investigates the achievable rate region of the multiple-input single-output (MISO) interference channel aided by intelligent reflecting surfaces (IRSs). We exploit the the additional design degree of freedom provided by the coordinated IRSs to enhance the desired signal and suppress interference so as to enlarge the achievable rate region of the interference channel. To this end, we jointly optimize the active transmit beamforming at the transmitters and passive reflective beamforming at the IRSs, subject to the constant modulus constraints of reflective beamforming vectors. To address the non-convex optimization problem, we propose an iterative algorithm to optimize the transmit beamforming via second-order cone program (SOCP) and the reflective beamforming via the semi-definite relaxation (SDR). Numerical results demonstrate that the performance of the IRS-aided interference channel with the proposed algorithm can significantly outperform the conventional interference channel without IRS., Comment: 5 pages, 2 figures

Wireless communication involving unmanned aerial vehicles (UAVs) is expected to play an important role in future wireless networks. However, different from conventional terrestrial communication systems, UAVs typically have rather limited onboard energy on one hand, and require additional flying energy consumption on the other hand, which renders energy-efficient UAV communication with smart energy expenditure of paramount importance. In this paper, via extensive flight experiments, we aim to firstly validate the recently derived theoretical energy model for rotary-wing UAVs, and then develop a general model for those complicated flight scenarios where rigorous theoretical model derivation is quite challenging, if not impossible. Specifically, we first investigate how UAV power consumption varies with its flying speed for the simplest straight-and-level flight. With about 12,000 valid power-speed data points collected, we first apply the model-based curve fitting to obtain the modelling parameters based on the theoretical closed-form energy model in the existing literature. In addition, in order to exclude the potential bias caused by the theoretical energy model, the obtained measurement data is also trained using a model-free deep neural network. It is found that the obtained curve from both methods can match quite well with the theoretical energy model. Next, we further extend the study to arbitrary 2-dimensional (2-D) flight, where, to our best knowledge, no rigorous theoretical derivation is available for the closed-form energy model as a function of its flying speed, direction, and acceleration. To fill the gap, we first propose a heuristic energy model for these more complicated cases, and then provide experimental validation based on the measurement results for circular level flight.