Search

This study brings out the design, fabrication and performance evaluation of a compact, dual band antenna on paper substrate. The two bands of operations are 2.18 to 2.50 and 5.22 to 5.72 GHz. These bands are used by the wireless sensor networks (WSNs) and radio frequency identification systems (RFID). The antenna becomes useful for the WSN nodes and RFID systems at these frequencies. The overall size of the antenna is 40 mm× 20 mm× 0.6 mm, which makes it a compact one. Antenna was tested for the effect of bending by placing it over curvilinear surfaces. The bending was done in horizontal (X) and vertical (Y) axes. These examinations will help to understand the effect of wind loading and other packaging related bending on antenna performance. The main features of this antenna are stability in performance under bent conditions, simple configuration and low cost of fabrication. A thin polyethylene layer has been used to laminate the antenna for permanence. The effect of lamination has also been explained in the course of the study. [ABSTRACT FROM AUTHOR]

The work presented is an assay done on the effects of wearable antenna when placed in proximity to the human body. Cloth fabric is used as a substrate to design a planar antenna. Measurement results of the fabricated patch at free space and close to the human body are also presented here. The S11 of the designed antenna when placed close to the body tissue is almost -30 dB and the gain is close to 4 dB. A rectangular three layered human body model is used to evaluate the extent of the effect that the human body has on the parameters that define an antenna like its gain, directivity, etc. [ABSTRACT FROM AUTHOR]

A low profile flexible linear to circular polarizer made of paper substrate is proposed in this paper. The polarizer is constructed from frequency selective surface (FSS) comprising of crossed dipole unit cell elements. The polarizer converts the linearly polarized incident electromagnetic wave to circular polarized wave at 7.0 GHz. The polarizer provides the advantage of use in conformal system, which is substantiated using bending analysis. The proposed reflective polarizer provides a 3 dB axial ratio bandwidth of 13% at the center frequency of 7.0 GHz. In addition, the proposed flexible polarizer provides stable response for angular incidences up to 30°. Prototype of the flexible FSS polarizer is fabricated and its simulation results are validated with experimental measurements. [ABSTRACT FROM AUTHOR]

This article presents the design of a three‐port diversity antenna capable of producing three‐directional radiation pattern for vehicular communications. The proposed antenna consists of three uncorrelated Vivaldi antennas that are interconnected and developed on a single printed circuit board. Unlike many other antennas reported for the vehicular environment, the proposed antenna offers ultra‐wideband characteristics with end‐fire radiation pattern leading to high realized antenna gain. The integrated antenna has a footprint of 65 × 40 × 1.6 mm3 and offers 6 GHz impedance bandwidth extending from 5 to 11 GHz. The port‐to‐port isolation is greater than 20 dB within the operating bandwidth. Furthermore, the diversity performance of the proposed three‐port antenna system is evaluated and presented. The calculated envelope correlation coefficient, diversity gain, and mean effective gain are well above the minimum requirement. The prototype antenna is fabricated and the experimental results are presented. [ABSTRACT FROM AUTHOR]