Search

Self-assembling block copolymers (poloxamers, PEG/PLA and PEG/PLGA diblock and triblock copolymers, PEG/polycaprolactone, polyether modified poly(Acrylic Acid)) with large solubility difference between hydrophilic and hydrophobic moieties have the property of forming temperature dependent micellar aggregates and, after a further temperature increase, of gellifying due to micelle aggregation or packing. This property enables drugs to be mixed in the sol state at room temperature then the solution can be injected into a target tissue, forming a gel depot in-situ at body temperature with the goal of providing drug release control. The presence of micellar structures that give rise to thermoreversible gels, characterized by low toxicity and mucomimetic properties, makes this delivery system capable of solubilizing water-insoluble or poorly soluble drugs and of protecting labile molecules such as proteins and peptide drugs.

(Arginine-alanine-aspartic acid-alanine)4 ((RADA)4) nanoscaffolds are excellent candidates for use as peptide delivery vehicles: they are relatively easy to synthesize with custom bio-functionality, and assemble in situ to allow a focal point of release. This enables (RADA)4 to be utilized in multiple release strategies by embedding a variety of bioactive molecules in an all-in-one “construct”. One novel strategy focuses on the local, on-demand release of peptides triggered via proteolysis of tethered peptide sequences. However, the spatial-temporal morphology of self-assembling nanoscaffolds may greatly influence the ability of enzymes to both diffuse into as well as actively cleave substrates. Fine structure and its impact on the overall effect on peptide release is poorly understood. In addition, fractal networks observed in nanoscaffolds are linked to the fractal nature of diffusion in these systems. Therefore, matrix morphology and fractal dimension of virgin (RADA)4 and mixtures of (RADA)4 and matrix metalloproteinase 2 (MMP-2) cleavable substrate modified (RADA)4 were characterized over time. Sites of high (glycine-proline-glutamine-glycine+isoleucine-alanine-serine-glutamine (GPQG+IASQ), CP1) and low (glycine-proline-glutamine-glycine+proline-alanine-glycine-glutamine (GPQG+PAGQ), CP2) cleavage activity were chosen. Fine structure was visualized using transmission electron microscopy. After 2 h of incubation, nanofiber networks showed an established fractal nature; however, nanofibers continued to bundle in all cases as incubation times increased. It was observed that despite extensive nanofiber bundling after 24 h of incubation time, the CP1 and CP2 nanoscaffolds were susceptible to MMP-2 cleavage. The properties of these engineered nanoscaffolds characterized herein illustrate that they are an excellent candidate as an enzymatically initiated peptide delivery platform.

Microbial fuel cells (MFCs) are promising devices for sustainable energy production, wastewater treatment and biosensors. Anode materials directly interact with electricigens and accept electrons between cells, playing an important role in determining the performance of MFCs. In this study, a novel carbon nanotubes (CNTs) and polyaniline (PANI) nanocomposite film modified Indium-tin oxide (ITO) anode was fabricated through graft polymerization of PANI after the modification of γ-aminopropyltriethoxysilane (APTES) on ITO substrate, which was followed by layer-by-layer (LBL) self-assembling of CNTs and PANI alternatively on its surface. (CNTs/PANI)n/APTES/ITO electrode with low charge transfer resistance showed better electrochemical behavior compared to the bare ITO electrode. Twelve layers of CNTs/PANI decorated ITO electrode with an optimal nanoporous network exhibited superior biocatalytic properties with a maximal current density of 6.98 µA/cm2, which is 26-fold higher than that of conventional ITO electrode in Shewanella loihica PV-4 bioelectrochemical system. MFCs with (CNTs/PANI)12/APTES/ITO as the anode harvested a maximum output power density of 34.51 mW/m2, which is 7.5-fold higher than that of the unmodified ITO electrode. These results demonstrate that (CNTs/PANI)12/APTES/ITO electrode has superior electrochemical and electrocatalytic properties compared to the bare ITO electrode, while the cellular toxicity of CNTs has an effect on the performance of MFC with (CNTs/PANI)n/APTES/ITO electrode.

• E-skin with a thermoelectric graphene/PDMS sponge and a piezoelectric array. • Graphene/PDMS sponge has a temperature sensitivity of 0.122 mV/K. • Differentiating press and shear force and recognizing shear directions by 0°–180°. • A robotic gripper with detection of the "holding" and "slipping" motion. • The reassembled array could acquire the spatial stimuli information. Real-time detection and differentiation of diverse external stimuli remains a huge challenge and largely restricts the development of electronic skins (e-skin). Hence, a versatile e-skin was developed by integrating a thermoelectric graphene/polydimethylsiloxane (PDMS) sponge with piezoelectric array, to minimize the coupling effect between thermal and mechanical excitations and distinguish different mechanical stimuli. Owing to the designed three-dimensional structure, the e-skin was capable of differentiating in-plane and out-of-plane force based on the corresponding induced strains. Besides, graphene/PDMS sponge was utilized as thermal tactile elements with a moderate temperature sensitivity of 0.122 mV/K. A wireless temperature sensing system was proposed for transmitting signals and "hot"/ "cold" tips to terminal devices. Importantly, the e-skin demonstrated excellent sensing performance on recognizing shear directions by 0°-180°. Therefore, a robotic gripper equipped the e-skin with detection of the "holding" and "slipping" motion exhibited promising prospects in artificial tactile feedback system with self-adjusting grip force. Moreover, the self-healing nature originated from shear stiffening elastomer matrix enabled that individual e-skin could be reassembled into an arrayed e-skin with the spatial tactile ability. This work provided a new strategy for designing functional e-skins, and paved the way for intelligent robotic technologies, including adaptive grasping, biomimetic robots, and human-machine interactions. [ABSTRACT FROM AUTHOR]

Short and ultra-short peptides have been recently envisioned as excellent building blocks for the formulation of hydrogels with appealing properties. Due to its simplicity and capability to gel under physiological conditions, Fmoc-FF (N α -fluorenylmethoxycarbonyl-diphenylalanine), remains one of the most studied low molecular-weight hydrogelators. Since its first identification in 2006, a plethora of its analogues were synthetized and investigated for the fabrication of novel supramolecular materials. Here we report a description of the Fmoc-FF analogues in which the aromatic Fmoc group is replaced with other substituents. These analogues are distinguished into five different classes including derivatives: i) customized with solid phase peptide synthesis protecting groups; ii) containing non-aromatic groups, iii) containing aromatic groups, iv) derivatized with metal complexes and v) containing stimuli-responsive groups. The morphological, mechanical, and functional effects caused by this modification on the resulting material are also pointed out., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Background: The clinical symptoms of invasive fungal infections (IFI) are nonspecific, and early clinical diagnosis is challenging, resulting in high mortality rates. This study reports the development of a novel aptamer-G-quadruplex/hemin self-assembling color system (AGSCS) based on (1 → 3)-β-D-glucans' detection for rapid, specific and visual diagnosis of IFI., Methods: We screened high affinity and specificity ssDNA aptamers binding to (1 → 3)-β-D-glucans, the main components of cell wall from Candida albicans via Systematic Evolution of Ligands by EXponential enrichment. Next, a comparison of diagnostic efficiency of AGSCS and the (1 → 3)-β-D-glucans assay ("G test") with regard to predicting IFI in 198 clinical serum samples was done., Results: Water-soluble (1 → 3)-β-D-glucans were successfully isolated from C. albicans ATCC 10,231 strain, and these low degree of polymerization glucans (< 1.7 kD) were targeted for aptamer screening with the complementary sequences of G-quadruplex. Six high affinity single stranded DNA aptamers (A1, A2, A3, A4, A5 and A6) were found. The linear detection range for (1 → 3)-β-D-glucans stretched from 1.6 pg/mL to 400 pg/mL on a microplate reader, and the detection limit was 3.125 pg/mL using naked eye observation. Using a microplate reader, the sensitivity and specificity of AGSCS for the diagnosis of IFI were 92.68% and 89.65%, respectively, which was higher than that of the G test., Conclusion: This newly developed visual diagnostic method for detecting IFI showed promising results and is expected to be developed as a point-of-care testing kit to enable quick and cost effective diagnosis of IFI in the future., (© 2023. The Author(s).)

GLP-1 has been clinically exploited for treating type 2 diabetes, while its short circulation half-life requires multiple daily injections to maintain effective glycemic control, thus limiting its widespread application. Here we developed a drug delivery system based on self-assembling polymer-amino acid conjugates (γ-PGA-PAE) to provide sustained release of GLP-1 analog (DLG3312). The DLG3312 loaded γ-PGA based nanoparticles (DLG3312@NPs) exhibited a spherical shape with a good monodispersity under transmission electron microscope (TEM) observation. The DLG3312 encapsulation was optimized, and the loading efficiency was as high as 78.4 ± 2.2 %. The transformation of DLG3312@NPs to network structures was observed upon treatment with the fresh serum, resulting in a sustained drug release. The in vivo long-term hypoglycemic assays indicated that DLG3312@NPs significantly reduced blood glucose and glycosylated hemoglobin level. Furthermore, DLG3312@NPs extended the efficacy of DLG3312, leading to a decrease in the dosing schedule that from once a day to once every other day. This approach combined the molecular and materials engineering strategies that offered a unique solution to maximize the availability of anti-diabetic drug and minimize its burdens to type 2 diabetic patients., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Advances in the number and type of available biomaterials have improved medical devices such as catheters, stents, pacemakers, prosthetic joints, and orthopedic devices. The introduction of a foreign material into the body comes with a risk of microbial colonization and subsequent infection. Infections of surgically implanted devices often lead to device failure, which leads to increased patient morbidity and mortality. The overuse and improper use of antimicrobials has led to an alarming rise and spread of drug-resistant infections. To overcome the problem of drug-resistant infections, novel antimicrobial biomaterials are increasingly being researched and developed. Hydrogels are a class of 3D biomaterials consisting of a hydrated polymer network with tunable functionality. As hydrogels are customizable, many different antimicrobial agents, such as inorganic molecules, metals, and antibiotics have been incorporated or tethered to them. Due to the increased prevalence of antibiotic resistance, antimicrobial peptides (AMPs) are being increasingly explored as alternative agents. AMP-tethered hydrogels are being increasingly examined for antimicrobial properties and practical applications, such as wound-healing. Here, we provide a recent update, from the last 5 years of innovations and discoveries made in the development of photopolymerizable, self-assembling, and AMP-releasing hydrogels.

The appeal of combining polybenzimidazole (PBI) and graphene oxide (GO) for the manufacturing of membranes is increasingly growing, due to their versatility. Nevertheless, GO has always been used only as a filler in the PBI matrix. In such context, this work proposes the design of a simple, safe, and reproducible procedure to prepare self-assembling GO/PBI composite membranes characterized by GO-to-PBI (X:Y) mass ratios of 1:3, 1:2, 1:1, 2:1, and 3:1. SEM and XRD suggested a homogenous reciprocal dispersion of GO and PBI, which established an alternated stacked structure by mutual π-π interactions among the benzimidazole rings of PBI and the aromatic domains of GO. TGA indicated a remarkable thermal stability of the composites. From mechanical tests, improved tensile strengths but worsened maximum strains were observed with respect to pure PBI. The preliminary evaluation of the suitability of the GO/PBI X:Y composites as proton exchange membranes was executed via IEC determination and EIS. GO/PBI 2:1 (IEC: 0.42 meq g -1 ; proton conductivity at 100 °C: 0.0464 S cm -1 ) and GO/PBI 3:1 (IEC: 0.80 meq g -1 ; proton conductivity at 100 °C: 0.0451 S cm -1 ) provided equivalent or superior performances with respect to similar PBI-based state-of-the-art materials.

The first line of treatment for most solid tumors is surgical resection of the primary tumor with adequate negative margins. Incomplete tumor resections with positive margins account for over 75% of local recurrences and the development of distant metastases. In cases of oral cavity squamous cell carcinoma (OSCC), the rate of successful tumor removal with adequate margins is just 50-75%. Advanced real-time imaging methods that improve the detection of tumor margins can help improve success rates,overall safety, and reduce the cost. Fluorescence imaging in the second near-infrared (NIR-II) window has the potential to revolutionize the field due to its high spatial resolution, low background signal, and deep tissue penetration properties, but NIR-II dyes with adequate in vivo performance and safety profiles are scarce. A novel NIR-II fluorophore, XW-03-66, with a fluorescence quantum yield (QY) of 6.0% in aqueous media is reported. XW-03-66 self-assembles into nanoparticles (≈80 nm) and has a systemic circulation half-life (t 1/2 ) of 11.3 h. In mouse models of human papillomavirus (HPV)+ and HPV- OSCC, XW-03-66 outperformed indocyanine green (ICG), a clinically available NIR dye, and enabled intraoperative NIR-II image-guided resection of the tumor and adjacent draining lymph node with negative margins. In vitro and in vivo toxicity assessments revealed minimal safety concerns for in vivo applications., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Octadecylazanediyl dipropionic acid (C18ADPA) is a zwitterionic amphiphile with a dendritic headgroup. C18ADPA self-assembles to lamellar networks, which encompasses water and forms a low-molecular-weight hydrogel (LMWG). In this study, we use the C18ADPA hydrogel as a drug carrier for the in vivo delivery of a copper salt for wound healing in a mouse model. A structural transition was observed based on cryo-scanning electron microscope (cryo-SEM) images after drug loading. The C18ADPA hydrogel, which had a layered structure, transformed into a self-assembled fibrillar network (SAFiN). The mechanical strength of the LMWG has always been an important issue in its applications. However, due to the structural transition, both the storage and loss moduli increased. In vivo tests showed that wound closure was faster after applying the hydrogel formulation compared with the Vaseline formulation. For the first time, we have also provided histological evidence of these effects on skin tissue. The hydrogel formulation exhibited clear advantages in regenerating tissue structure over traditional delivery formulations.

This work reports the preliminary results of the development of composite self-assembling membranes obtained by the combination of reduced graphene oxide (rGO) with commercial Degussa P25 titanium dioxide (TiO 2 ). The purpose is to demonstrate the possibility of combining, in the same self-standing material, the capability to treat wastewater containing both inorganic and organic pollutants by exploiting the established ability of rGO to capture metal ions together with that of TiO 2 to degrade organic substances. Moreover, this study also investigates the potential photocatalytic properties of tionite (TIO), to demonstrate the feasibility of replacing commercial TiO 2 with such waste-derived TiO 2 -containing material, fulfilling a circular economy approach. Thus, rGO-TiO 2 and rGO-TIO composite membranes, 1:1 by weight, were prepared and characterized by SEM-EDX, XRD, thermogravimetry, as well as by Raman and UV-Vis spectroscopies to verify the effective and homogeneous integration of the two components. Then, they were tested towards 3-mg L -1 aqueous synthetic solutions of Fe 3+ and Cu 2+ ions to evaluate their metal adsorption ability, with values of the order of 0.1-0.2 mmol g membrane -1 , comparable or even slightly higher than those of pristine rGO. Finally, the ability of the composites to degrade a common organic pesticide, i.e., Imidacloprid ® , was assessed in preliminary photocatalysis experiments, in which maximum degradation efficiencies of 25% (after 3 h) for rGO-TiO 2 and of 21% (after 1 h) for rGO-TIO were found. The result of tionite-containing membranes is particularly promising and worthy of further investigation, given that the anatase content of tionite is roughly 1/6 of the one in commercial TiO 2 .

Understanding the direct interaction of nanostructures per se with biological systems is important for biomedical applications. However, whether nanostructures regulate biological systems by targeting specific cellular proteins remains largely unknown. In the present work, self-assembling nanomicelles are constructed using small-molecule oleanolic acid (OA) as a molecular template. Unexpectedly, without modifications by functional ligands, OA nanomicelles significantly activate cellular proteasome function by directly binding to 20S proteasome subunit alpha 6 (PSMA6). Mechanism study reveals that OA nanomicelles interact with PSMA6 to dynamically modulate its N-terminal domain conformation change, thereby controlling the entry of proteins into 20S proteasome. Subsequently, OA nanomicelles accelerate the degradation of several crucial proteins, thus potently driving cancer cell pyroptosis. For translational medicine, OA nanomicelles exhibit a significant anticancer potential in tumor-bearing mouse models and stimulate immune cell infiltration. Collectively, this proof-of-concept study advances the mechanical understanding of nanostructure-guided biological effects via their inherent capacity to activate proteasome., (© 2022 Wiley-VCH GmbH.)

The recent achievements in studying the self-assembled evolution of micro- and nanoscale domain structures in uniaxial single crystalline ferroelectrics lithium niobate and lithium tantalate have been reviewed. The results obtained by visualization of static domain patterns and kinetics of the domain structure by different methods from common optical microscopy to more sophisticated scanning probe microscopy, scanning electron microscopy and confocal Raman microscopy, have been discussed. The kinetic approach based on various nucleation processes similar to the first-order phase transition was used for explanation of the domain structure evolution scenarios. The main mechanisms of self-assembling for nonequilibrium switching conditions caused by screening ineffectiveness including correlated nucleation, domain growth anisotropy, and domain–domain interaction have been considered. The formation of variety of self-assembled domain patterns such as fractal-type, finger and web structures, broad domain boundaries, and dendrites have been revealed at each of all five stages of domain structure evolution during polarization reversal. The possible applications of self-assembling for micro- and nanodomain engineering were reviewed briefly. The review covers mostly the results published by our research group.

A novel cyano-terminated zinc phthalocyanine (ZnPc-CN) exhibiting visible near infrared (vis-NIR) emitting around 690 nm in N,N -dimethylformamide (DMF) solvent has been synthesized. Furthermore, the peripheral cyano groups of newly synthesized zinc phthalocyanine were hydrolyzed in strong basic solution, leading to water soluble carboxylated zinc phthalocyanine (ZnPc-COOH) with completely quenched fluorescence in aqueous solution. Interestingly, we found that the NIR fluorescence of aqueous ZnPc-COOH was dramatically recovered in the presence of gold nanorods (Au NR), which was due to the alternation of ZnPc-COOH molecules self-assembling via electrostatic interaction between cetyltrimethylammonium bromide (CTAB) on the surface of Au NR and peripheral carboxyl of ZnPc-COOH. In addition, ZnPc-COOH/Au NR conjugates demonstrated an improved singlet oxygen generation, which could be served as potential bioimaging probe and photosensitizer for photodynamic therapy. [ABSTRACT FROM AUTHOR]

Gold nanorods (AuNRs) are suitable for constructing self-assembled structures for the development of biosensing devices and are usually obtained in the presence of cetyltrimethylammonium bromide (CTAB). Here, a sulfated chitosan (ChiS) and gum arabic (GA) were employed to encapsulate CTAB/AuNRs with the purpose of studying the interactions of the polysaccharides with CTAB, which is cytotoxic and is responsible for the instability of nanoparticles in buffer solutions. The presence of a variety of functional groups such as the sulfate groups in ChiS and the carboxylic groups in GA, led to efficient interactions with CTAB/AuNRs as evidenced through UV–vis and FTIR spectroscopies. Electron microscopies (HR-SEM and TEM) revealed that nanoparticle clusters were formed in the GA-AuNRs sample, whereas individual AuNRs, surrounded by a dense layer of polysaccharides, were observed in the ChiS-AuNRs sample. Therefore, the presented work contributes to the understanding of the driving forces that control the surface interactions of the studied materials, providing useful information in the building-up of gold self-assembled nanostructures. [ABSTRACT FROM AUTHOR]

M-type hexagonal barium ferrite is one of the most favorable ferrite materials, whose functional properties such as ferroelectric polarity alignment and the interaction between electron spins could be controlled by manipulating its stoichiometry or microstructure. In this letter, BaFe 12 O 19 films have been prepared on Al 2 O 3 substrate by pulsed laser deposition at different temperature. AFM and SEM results show that under optimal preparation condition, the films change into self-assembled triangular shaped nano-islands with highly regulated orientation. Interesting magnetic and optical properties have been observed in these BaFe 12 O 19 nanostructures. We believe this work may provide a unique opportunity to investigate anomalous phenomenons associated with nanostructured magnetic oxides and the growth dynamics of ferrite films. [ABSTRACT FROM AUTHOR]

Formation and assembling of CdS nanocrystals (NC) on highly-ordered pyrolytic graphite (HOPG) and on oxidized silicon substrates have been investigated by atomic force microscopy (AFM) and scanning tunneling microscopy (STM). NC were initially formed within a Langmuir-Blodgett (LB) matrix of cadmium behenate. The LB matrix was then removed by annealing in an ammonia atmosphere. It is shown that the NC self-assembling is mainly determined by the LB matrix wetting properties. In case of wettable HOPG substrate homogeneous matrix evaporation occurs that leads to coarsening of the NC arrays as the main self-assembly process. Otherwise, NC prepared on non-wettable SiO2-Si substrate demonstrate arrays formation determined by the LB matrix dewetting process. For the both cases, the influence of kinetic limitations connected with matrix evaporation rate on the self-assembly process is observed. (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [ABSTRACT FROM AUTHOR]

A single chain polypeptide containing the low density lipoprotein receptor (LDLR) ligand Seq-1 with blood–brain barrier (BBB) crossing activity has been successfully modified by conventional genetic engineering to self-assemble into stable protein-only nanoparticles of 30 nm. The nanoparticulate presentation dramatically enhances in vitro , LDLR-dependent cell penetrability compared to the parental monomeric version, but the assembled protein does not show any enhanced brain targeting upon systemic administration. While the presentation of protein drugs in form of nanoparticles is in general advantageous regarding correct biodistribution, this principle might not apply to brain targeting that is hampered by particular bio-physical barriers. Irrespective of this fact, which is highly relevant to the nanomedicine of central nervous system, engineering the cationic character of defined protein stretches is revealed here as a promising and generic approach to promote the controlled oligomerization of biologically active protein species as still functional, regular nanoparticles. [ABSTRACT FROM AUTHOR]

Two well-known active agents, mesalamine (MES) and sucralfate (SUC), were investigated for possible utilization as fixed-dose combination product. The anti-inflammatory action of MES in association with bioadhesiveness and mucosal healing properties of SUC were considered promising for the development of a new compound containing both molecules, aimed as an improved treatment of ulcerative colitis. The present study investigates the capacity of the two active agents to interact and generate a new and stable entity via self-assembling. Spray-drying was used to co-process the two active principles from an aqueous mixture where the ratio MES:SUC was in the range 25:75, 50:50, and 75:25. The structural data (X-Ray, FTIR, SEM, DSC, and1H NMR) have shown that MES and SUC are interacting leading to complexes with properties differing from those of each separate active agent and from their physical blends.1H NMR results indicated that complexation occurred when the aqueous suspensions of drugs were mixed, prior to spray-drying. Drug–drug self-assembling was the driving mechanism in the formation of the new entity. Based on the structural data, a hypothetical structure of the complex was proposed. Co-processing of MES and SUC represents a simple and useful procedure to prepare new self-assembled compounds by valorizing the ionic interactions between the two entities. Preliminary studies with oral solid dosage forms based on MES–SUC complexes testedin vitrohave shown a controlled MES release, opening the perspective of a new colon-targeted delivery system and a novel class of compounds with therapeutic application in inflammatory bowel diseases. [ABSTRACT FROM AUTHOR]

Long range hexagonally ordered TiO 2 nanotube arrangements have been synthesized by employing a novel strategy consisted of combining the well-known Laser Interference Lithography technique together with electrochemical anodization methods. By properly tuning the fabrication parameters that make match between both techniques, TiO 2 nanotube arrays having near 32 nm of inner diameter, wall thickness around of 25 nm and 210 nm of lattice parameter were anodically grown on pre-patterned Ti foils over large sample surface areas, typically of several squared centimetres in size. This opens the possibility to the development of new types of functional devices based on self-organized morphologies of anodic TiO 2 nanotubes, requiring both high spatially ordered and defect-free nanotube arrangements. [ABSTRACT FROM AUTHOR]

Ovarian cancers are the leading cause for mortality among gynecologic malignancies with five-year survival rate less than 30%. The purpose of this study is to develop a redox and pH-sensitive self-assembling hyaluronic acid nanoparticle with active targeting peptide for anticancer drug delivery. Anti-cancer drug is grafted onto hyaluronic acid (HA) via cis -aconityl linkage and disulfide bond to possess pH sensitivity and redox property, respectively. This conjugate is amphiphilic and can self-assemble into nanoparticle (NP) in aqueous solution. The results show that the nanoconjugate is successfully developed and the grafting ratio of cystamine (cys) is 17.8% with drug loading amount about 6.2% calculated by 1 H NMR spectra. The particle size is approximately 229.0 nm using dynamic light scatting measurement, and the morphology of nanoparticles is observed as spherical shape by transmission electron microscope. The pH and redox sensitivities are evaluated by changing either pH value or concentration of dithiothreitol in the medium. It is proved that the drug carrier is capable of achieving sustained controlled release of anti-cancer drug to 95% within 150 h. The intracellular uptake is observed by fluorescent microscope and the images show that conjugating luteinizing hormone-releasing hormone (LHRH) peptide can enhance specific uptake of nanoparticles by OVCAR-3 cancer cells; thus, resulting in inhibitory cell growth to less than 20% in 72 h in vitro . Orthotopic ovarian tumor model is also established to evaluate the therapeutic and diagnostic efficacy using non-invasive in vivo imaging system. The representative results demonstrate that LHRH-conjugated NPs possess a preferable tumor imaging capability and an excellent antitumor ability to almost 30% of original size in 20 days. [ABSTRACT FROM AUTHOR]

The formation of self-assembled ferroelectric glycine films of various morphologies by spin coating technique was investigated. The film morphology varied from dendritic feather-like structure to arrays of individual micro- and nanoislands and 15 nm-thick layers. It was confirmed by confocal Raman microscopy that most of the films belonged to ferroelectric beta phase. Piezoelectric properties and domain structure of the films were studied by piezoresponse force microscopy. [ABSTRACT FROM AUTHOR]

The films of glycine consisting of isolated microcrystals were prepared by spin coating and drying of the aqueous solution. Drying leads to dewetting (arising and growth of the holes) and formation of quasi-regular arrays of microcrystals that form the net structure consisting of Voronoi cells. The time dependence of the hole boundary velocity leading to formation of the straight net segments was proposed. Numerical model of hole nucleation and growth by boundary motion was proposed for the computer simulation. The coincidence of the simulated structures obtained within Kolmogorov alpha-model with experimental structures confirmed the validity of proposed approach. [ABSTRACT FROM AUTHOR]

The polarization reversal was studied in single crystals of lithium tantalate with intermediate deviation from stoichiometric composition (([Li]/([Li]+[Ta]) = 48.9%) with and without surface photoresist layer. The switching current was analyzed according to the stages of domain structure evolution revealed duringin situvisualization of domain kinetics. The characteristic times of the switching process were extracted by fitting of the experimental data using modified Kolmogorov-Avrami model. The formation of the self-assembled domain chains was observed during polarization reversal with photoresist dielectric layer on one polar surface. [ABSTRACT FROM AUTHOR]

The use of recombinant elastin-like materials, or elastin-like recombinamers (ELRs), in drug-delivery applications is reviewed in this work. Although ELRs were initially used in similar ways to other, more conventional kinds of polymeric carriers, their unique properties soon gave rise to systems of unparalleled functionality and efficiency, with the stimuli responsiveness of ELRs and their ability to self-assemble readily allowing the creation of advanced systems. However, their recombinant nature is likely the most important factor that has driven the current breakthrough properties of ELR-based delivery systems. Recombinant technology allows an unprecedented degree of complexity in macromolecular design and synthesis. In addition, recombinant materials easily incorporate any functional domain present in natural proteins. Therefore, ELR-based delivery systems can exhibit complex interactions with both their drug load and the tissues and cells towards which this load is directed. Selected examples, ranging from highly functional nanocarriers to macrodepots, will be presented. [ABSTRACT FROM AUTHOR]

Electro-colloidal lithography (ECL) is an easy, fast, straightforward and cheap patterning process that has been used here to design patterned copper film. ECL consists in assembling polystyrene (PS) micro-beads in 2D hexagonal crystals onto an electrode using AC (Alternative Current) electric field, in sticking them onto the electrode surface where copper is then deposited using Cu 2+ -containing multi-lamellar vesicles (MLVs) submitted to a DC (Direct Current) electric field. Copper rings are then formed; their separation, ranging from 2 to 4.2 μm, could be varied playing on either PS beads size or on AC electric field parameters (frequency and amplitude). The ring internal diameter (100–880 nm range), the ring height (28–400 nm range) as well as the copper film thickness (6–102 nm range) were controlled through the time of DC field application. AFM, SEM, microscopic imaging as well as mathematical modeling show that PS beads behave as a template for copper ring growth, and that this patterning is due to an accumulation of MLVs around the dielectric PS spheres on the electrode. [ABSTRACT FROM AUTHOR]

The present investigation is focused on evaluation of self-assembling ability in aqueous solutions of two water soluble polymers: poly(aspartic acid) (PAS) and Pluronic F127 (PL). The intermolecular complexes, realized between polyacid and neutral copolymer surfactant in different ratios, have been studied by combining various characterization techniques as rheology, DLS, spectroscopy, microscopy, chemical imaging, and zeta potential determination, measurements performed in static and/or dynamic conditions. In static conditions, when the equilibrium state between PAS/PL polymeric pair was reached, and depending on the polymers mixture composition, and of experimental rheological conditions, positive or negative deviations from the additive rule are registered. Conformational changes of the macromolecular chains and correspondingly physical interactions are generated between PL and PAS for self-assembly and the formation of interpolymer complex as suprastructure with micellar configuration. The phenomenon was better evidenced in case of 1/1 wt ratio between the two polymers. In dynamic conditions of determination, during “in situ” evaluation of the hydrodynamic diameter, zeta potential and conductivity, when the equilibrium state is not reached and as result either the intermolecular bonds are not achieved, the self-assembling process is not so obvious evidenced. [ABSTRACT FROM AUTHOR]

Semiconductors with isoelectronic centers are actively studied to fabricate arrays of identical single photon emitters. Self-assembling of 4N10In and 1N4In clusters in GaAs-rich InxGa1-xNyAs1-y is represented. All or almost all In atoms are in 4N10In clusters from 0 to 800 °C in InxGa1-xNyAs1-y with x = 1×10-4, y = 1×10-4 and x = 1×10-5, y = 1×10-5. All or almost all nitrogen atoms are in 1N4In clusters if x = 0.01, y = 1×10-4 and x = 1×10-3, y = 1×10-6. There are both types of clusters in alloys with x = 5×10-5, y = 5×10-7; x = 2×10-4, y = 2×10-6; x = 1×10-4, y = 1×10-5 and x = 2×10-3, y = 2×10-4 and portions of nitrogen atoms in clusters depend on the composition and temperature. Thus, InxGa1-xNyAs1-y are promising semiconductors to obtain arrays of identical isoelectronic clusters with the desirable density. (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [ABSTRACT FROM AUTHOR]

The discovery of stereocomplexation, secondary interaction between enantiomeric poly( l-lactide) ( PLLA) and poly( d-lactide) ( PDLA) provides a method for the creation of novel biomaterials with distinctive chemical and physical stability. Stereocomplexation opens a new way for the preparation of diverse micro- and nanostructures such as uniform microspheres, hollow particles, micelles, nanocrystals, nanofibres, nanotubes and polymerosomes. Herein, we describe the design of stereocomplex assemblies for specific applications and methods for their preparation. This review focuses primarily on the use of stereocomplex assemblies in biomedical applications due to the improved stability and physicochemical properties in comparison to enantiomeric polylactides. To make the polylactide stereocomplexes soluble in water and, as a consequence, to improve compatibility with the human body, various amphiphilic copolymers with PLLA and PDLA enantiomeric segments can be prepared. Stereocomplexation can facilitate their self-assembly into micro- and nanoparticles, stabilize the particle size and morphology and can also have an influence on the in vivo degradation rate and cytotoxicity of these materials. Stimuli-responsiveness in stereocomplex assemblies can be achieved by copolymerization of lactide with, for example, thermoresponsive N-isopropylacrylamide or amino acids with pH-sensitive pendant groups. Stereocomplex micro- and nanoparticles are used for encapsulation of various bioactive compounds: anticancer drugs, antibiotics and proteins. Finally, examples of materials in which high thermal and mechanical stabilities delivered as a result of stereocomplexation play a crucial role, i.e. hydrogels, nanofibres, microcellular foams and artificial skin, are described. The preparation of biomaterials and biomedical systems based on polylactide stereocomplex assemblies opens new opportunities in this field. © 2015 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

A bi-component nanostructured system composed by a Co dot array embedded in a Ni80Fe20 antidot matrix has been prepared by means of the self-assembling polystyrene nanospheres lithography technique. Reference samples constituted by the sole Co dots or Ni80Fe20 antidots have also been prepared, in order to compare their properties with those of the bi-component material. The coupling between the two ferromagnetic elements has been studied by means of magnetic and magneto-transport measurements. The Ni80Fe20 matrix turned out to affect the vortex nucleation field of the Co dots, which in turn modifies the magneto-resistance behaviour of the system and its spinwave properties.

Hydrogels based on polysaccharide and protein natural polymers are of great interest in biomedical applications and more specifically for tissue regeneration and drug delivery. Cellulose, chitosan (a chitin derivative), and collagen are probably the most important components since they are the most abundant natural polymers on earth (cellulose and chitin) and in the human body (collagen). Peptides also merit attention because their self-assembling properties mimic the proteins that are present in the extracellular matrix. The present review is mainly focused on explaining the recent advances on hydrogels derived from the indicated polymers or their combinations. Attention has also been paid to the development of hydrogels for innovative biomedical uses. Therefore, smart materials displaying stimuli responsiveness and having shape memory properties are considered. The use of micro- and nanogels for drug delivery applications is also discussed, as well as the high potential of protein-based hydrogels in the production of bioactive matrices with recognition ability (molecular imprinting). Finally, mention is also given to the development of 3D bioprinting technologies.

Effectively, two-dimensional (2D) closed films exhibiting in-plane orientational ordering (ordered shells) might be instrumental for the realization of scaled crystals. In them, ordered shells are expected to play the role of atoms. Furthermore, topological defects (TDs) within them would determine their valence. Namely, bonding among shells within an isotropic liquid matrix could be established via appropriate nano-binders (i.e., linkers) which tend to be attached to the cores of TDs exploiting the defect core replacement mechanism. Consequently, by varying configurations of TDs one could nucleate growth of scaled crystals displaying different symmetries. For this purpose, it is of interest to develop a simple and robust mechanism via which one could control the position and number of TDs in such atoms. In this paper, we use a minimal mesoscopic model, where variational parameters are the 2D curvature tensor and the 2D orientational tensor order parameter. We demonstrate numerically the efficiency of the effective topological defect cancellation mechanism to predict positional assembling of TDs in ordered films characterized by spatially nonhomogeneous Gaussian curvature. Furthermore, we show how one could efficiently switch among qualitatively different structures by using a relative volume v of ordered shells, which represents a relatively simple naturally accessible control parameter.

BiOCl powders with different morphology were obtained through self-assembling. Their photocatalytic performance was tested through degradation of organic dye and mechanism of photocatalytic for obtained samples were investigated. Relevant characterization demonstrated that facet synergy was a main reason of photocatalytic performance promotion due to changed facet exposure and proportion under self-assembling. Theory and experimental analysis manifested that synergistic facet stimulated Z scheme transition in samples with lower (001) facet proportion, which provided favorable condition of 1O 2 generation and simultaneously generated prominent charge separation. This work unveiled the facet synergy dominant photocatalytic performance improvement in self-assembling system of BiOCl and verified decisive role of facet proportion in constructing Z-scheme facet junction, which also prompted possibility of improving 1O 2 generation through facet engineering under self-assembling. [Display omitted] • Self-assembling could trigger facet synergy on obtained samples, dominating the photocatalytic process. • Facet proportion is a decisive factor in facet junction and only weak enough (001) facet orientation would stimulate Z-scheme junction. • Z-scheme transition enhanced 1O 2 generation due to exciton generation improvement. [ABSTRACT FROM AUTHOR]