Search

To be an effective tool in studying cardiovascular disease and designing new treatments, computational fluid dynamics (CFD) needs to move from the realm of "high performance" to "high throughput" computing by improving efficiency while retaining accuracy. Solution adaptive mesh refinement (AMR) has the potential to decrease simulation time and benefits would be greater if the mesh could dynamically adapt throughout a heartbeat. This study used cut‐cell Cartesian grids with AMR at each time step. The refinement criteria was based on subgrid scale (SGS). The potential efficiency improvements from AMR were investigated with the FDA nozzle benchmark case at Re 500, 3500 and 6500. Using AMR with SGS = 1% mean throat velocity simulations could be performed in under 24 h on 16 CPUs with high accuracy compared to both FDA particle image velocimetry experiments and refined uniform grid CFD. This was an efficiency improvement of over an order of magnitude compared to uniform grids and other AMR SGS values. Using AMR with SGS = 5 or 0.2% mean throat velocity did not result in large efficiency improvements. Lastly, simulations of pulsatile flow suggest that performance improvements for typical cardiovascular flows may be even greater than were found simulating the statistically stationary FDA nozzle experiments. [ABSTRACT FROM AUTHOR]

Purpose: Anatomic changes that coincide with aging including benign prostatic hyperplasia (BPH) and lower urinary tract symptoms (LUTS) negatively impact quality of life. Use of MRI with its exquisite soft tissue contrast, full field-of-view capabilities, and lack of radiation is uniquely suited for quantifying specific lower urinary tract features and providing comprehensive measurements such as total bladder wall volume (BWV), bladder wall thickness (BWT), and prostate volume (PV). We present a technique for generating 3D anatomical renderings from MRI to perform quantitative analysis of lower urinary tract anatomy. Methods: T2-weighted fast-spin echo MRI of the pelvis in 117 subjects (59F;58 M) aged 30–69 (49.5 ± 11.3) without known lower urinary tract symptoms was retrospectively segmented using Materialise software. Virtual 3D models were used to measure BWV, BWT, and PV. Results: BWV increased significantly between the 30–39 and 60–69 year age group in women (p = 0.01), but not men (p = 0.32). BWV was higher in men than women aged 30–39 and 40–49 (p = 0.02, 0.05, respectively) ,but not 50–59 or 60–69 (p = 0.18, 0.16, respectively). BWT was thicker in men than women across all age groups. Regional differences in BWT were observed both between men and women and between opposing bladder wall halves (anterior/posterior, dome/base, left/right) within each sex in the 50–59 and 60–69 year groups. PV increased from the 30–39 to 60–69 year groups (p = 0.05). BWT was higher in subjects with enlarged prostates (> 40cm3) (p = 0.05). Conclusion: Virtual 3D MRI models of the lower urinary tract reliably quantify sex-specific and age-associated changes of the bladder wall and prostate. [ABSTRACT FROM AUTHOR]

Background: Branch pulmonary artery (PA) stenosis (PAS) commonly occurs in patients with congenital heart disease (CHD). Prior studies have documented technical success and clinical outcomes of PA stent interventions for PAS but the impact of PA stent interventions on ventricular function is unknown. The objective of this study was to utilize 4D flow cardiovascular magnetic resonance (CMR) to better understand the impact of PAS and PA stenting on ventricular contraction and ventricular flow in a swine model of unilateral branch PA stenosis. Methods: 18 swine (4 sham, 4 untreated left PAS, 10 PAS stent intervention) underwent right heart catheterization and CMR at 20 weeks age (55 kg). CMR included ventricular strain analysis and 4D flow CMR. Results: 4D flow CMR measured inefficient right ventricular (RV) and left ventricular (LV) flow patterns in the PAS group (RV non-dimensional (n.d.) vorticity: sham 82 ± 47, PAS 120 ± 47; LV n.d. vorticity: sham 57 ± 5, PAS 78 ± 15 p < 0.01) despite the PAS group having normal heart rate, ejection fraction and end-diastolic volume. The intervention group demonstrated increased ejection fraction that resulted in more efficient ventricular flow compared to untreated PAS (RV n.d. vorticity: 59 ± 12 p < 0.01; LV n.d. vorticity: 41 ± 7 p < 0.001). Conclusion: These results describe previously unknown consequences of PAS on ventricular function in an animal model of unilateral PA stenosis and show that PA stent interventions improve ventricular flow efficiency. This study also highlights the sensitivity of 4D flow CMR biomarkers to detect earlier ventricular dysfunction assisting in identification of patients who may benefit from PAS interventions. [ABSTRACT FROM AUTHOR]

Lower urinary track symptoms (LUTS) affect many older adults. Multi-channel urodynamic studies provide information about bladder pressure and urinary flow but offer little insight into changes in bladder anatomy and detrusor muscle function. Here we present a novel method for real time MRI during bladder voiding. This was performed in a small cohort of healthy men and men with benign prostatic hyperplasia and lower urinary tract symptoms (BPH/LUTS) to demonstrate proof of principle; The MRI urodynamic protocol was successfully implemented, and bladder wall displacement and urine flow dynamics were calculated. Displacement analysis on healthy controls showed the greatest bladder wall displacement in the dome of the bladder while men with BPH/LUTS exhibited decreased and asymmetric bladder wall motion. Computational fluid dynamics of voiding showed men with BPH/LUTS had larger recirculation regions in the bladder. This study demonstrates the feasibility of performing MRI voiding studies and their potential to provide new insight into lower urinary tract function in health and disease. [ABSTRACT FROM AUTHOR]

Characterization of hepatic blood flow magnitude and distribution can lead to a better understanding of the pathophysiology of liver disease. However, the underlying patterns and dynamics of hepatic flow, such as the helical flow structure that often develops following the spleno-mesenteric confluence (SMC) of the hepatic portal vein, have not yet been comprehensively studied. In this study, we used magnetic resonance image (MRI)-based computational models to study the effects of the helical flow structure and SMC geometry on portal blood flow distribution. Additionally, we examined these flow dynamics with four-dimensional (4D) flow MRI in a group of 12 cirrhotic patients and healthy subjects. A validation model was also created to compare computational data to particle image velocimetry (PIV) data. We found significant correlations between flow structure development, vessel geometry, and blood flow distribution in both virtually modified models and in healthy and cirrhotic subjects. However, the direction of these correlations varied among vessel configuration types. Nonetheless, validation model results displayed good qualitative agreement with computational model data. [ABSTRACT FROM AUTHOR]

En este artículo se indaga por las condiciones necesarias para la cooperación de municipios colindantes en la integración de áreas metropolitanas en Colombia a partir de una revisión, bajo el marco analítico del institucionalismo de elección racional, de las principales teorías sobre el gobierno metropolitano y la normativa vigente relacionada con la jurisdicción metropolitana en el país. Se concluye que la conformación de un área metropolitana en Colombia obedece a la existencia de beneficios extraordinarios para los municipios participantes, y que el fortalecimiento de la gobernanza metropolitana depende, bien del mantenimiento de dichos beneficios o bien de un fortalecimiento de los mecanismos de veeduría que modifiquen los incentivos a los hacedores de políticas.

A low relative area change (RAC) of the proximal pulmonary artery (PA) over the cardiac cycle is a good predictor of mortality from right ventricular failure in patients with pulmonary hypertension (PH). The relationship between RAC and local mechanical properties of arteries, which are known to stiffen in acute and chronic PH, is not clear, however. In this study, we estimated elastic moduli of three PAs (MPA, LPA and RPA: main, left and right PAs) at the physiological state using mechanical testing data and correlated these estimated elastic moduli to RAC measured in vivo with both phase-contrast magnetic resonance imaging (PC-MRI) and M-mode echocardiography (on RPA only). We did so using data from a canine model of acute PH due to embolization to assess the sensitivity of RAC to changes in elastic modulus in the absence of chronic PH-induced arterial remodeling. We found that elastic modulus increased with embolization-induced PH, presumably a consequence of increased collagen engagement, which corresponds well to decreased RAC. Furthermore, RAC was inversely related to elastic modulus. Finally, we found MRI and echocardiography yielded comparable estimates of RAC. We conclude that RAC of proximal PAs can be obtained from either MRI or echocardiography and a change in RAC indicates a change in elastic modulus of proximal PAs detectable even in the absence of chronic PH-induced arterial remodeling. The correlation between RAC and elastic modulus of proximal PAs may be useful for prognoses and to monitor the effects of therapeutic interventions in patients with PH. [ABSTRACT FROM AUTHOR]

To gain further insight into male–female differences in cardiovascular conditions it is important to understand sex differences in healthy populations. A previous study from our group of 39 healthy young volunteers (20–35 years) paradoxically found that men had greater left ventricular (LV) kinetic energy (KE) but women had greater LV vorticity. We reanalyzed cardiac four-dimensional flow MRI data from 20 of the original subjects (10 male and 10 female) to quantify aortic flow in addition to LV flow. The combination of LV and aortic flow parameters were then used to calculate ventricular vascular coupling of KE and vorticity. The sex difference found in LV flow were not found in aortic flow and the ventricular-vascular coupling of LV-to-aortic flow was similar between men and women. Dimensional analysis to account for differences in cardiac output and ventricular volume explained the differences found in LV flow. The analysis methods and results of this study may be of further use in understanding ventricular vascular coupling of transported flow variables in healthy sex differences, healthy aging, and various cardiovascular conditions. [ABSTRACT FROM AUTHOR]

Competing Interests: The authors reported no conflicts of interest. The Journal policy requires editors and reviewers to disclose conflicts of interest and to decline handling manuscripts for which they may have a conflict of interest. The editors and reviewers of this article have no conflicts of interest.

4D Flow MRI is an advanced imaging technique for comprehensive non-invasive assessment of the cardiovascular system. The capture of the blood velocity vector field throughout the cardiac cycle enables measures of flow, pulse wave velocity, kinetic energy, wall shear stress, and more. Advances in hardware, MRI data acquisition and reconstruction methodology allow for clinically feasible scan times. The availability of 4D Flow analysis packages allows for more widespread use in research and the clinic and will facilitate much needed multi-center, multi-vendor studies in order to establish consistency across scanner platforms and to enable larger scale studies to demonstrate clinical value., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Purpose: This study addresses the challenges in obtaining abdominal 4D flow MRI of obese patients. We aimed to evaluate spectral saturation and inner volume excitation as methods to mitigating artifacts originating from adipose signals, with the goal of enhancing image quality and improving quantification., Methods: Radial 4D flow MRI acquisitions with fat mitigation (inner volume excitation [IVE] and intermittent fat saturation [FS]) were compared to a standard slab selective excitation (SSE) in a test-retest study of 15 obese participants. IVE selectively excited a cylindrical region of interest, avoiding contamination from peripheral adipose tissue, while FS globally suppressed fat based on spectral selection. Acquisitions were evaluated qualitatively based on expert ratings and quantitatively based on conservation of mass, test-retest repeatability, and a divergence free quality metric. Errors were evaluated statistically using the absolute and relative errors, regression, and Bland-Altman analysis., Results: IVE demonstrated superior performance quantitatively in the conservation of mass analysis in the portal vein, with higher correlation and lower bias in regression analysis. IVE also produced flow fields with the lowest divergence error and was rated best in overall image quality, delineating small vessels, and producing the least streaking artifacts. Evaluation results did not differ significantly between FS and SSE. Test-retest reproducibility was similarly high for all sequences, with data suggesting biological variations dominate the technical variability., Conclusion: IVE improved hemodynamic assessment of radial 4D flow MRI in the abdomen of obese participants while FS did not lead to significant improvements in image quality or flow metrics., (© 2023 The Authors. Magnetic Resonance in Medicine published by Wiley Periodicals LLC on behalf of International Society for Magnetic Resonance in Medicine.)

Purpose: To evaluate feasibility and reproducibility of liver diffusion-weighted (DW) MRI using cardiac-motion-robust, blood-suppressed, reduced-distortion techniques., Methods: DW-MRI data were acquired at 3T in an anatomically accurate liver phantom including controlled pulsatile motion, in eight healthy volunteers and four patients with known or suspected liver metastases. Standard monopolar and motion-robust (M1-nulled, and M1-optimized) DW gradient waveforms were each acquired with single-shot echo-planar imaging (ssEPI) and multishot EPI (msEPI). In the motion phantom, apparent diffusion coefficient (ADC) was measured in the motion-affected volume. In healthy volunteers, ADC was measured in the left and right liver lobes separately to evaluate ADC reproducibility between the two lobes. Image distortions were quantified using the normalized cross-correlation coefficient, with an undistorted T2-weighted reference., Results: In the motion phantom, ADC mean and SD in motion-affected volumes substantially increased with increasing motion for monopolar waveforms. ADC remained stable in the presence of increasing motion when using motion-robust waveforms. M1-optimized waveforms suppressed slow flow signal present with M1-nulled waveforms. In healthy volunteers, monopolar waveforms generated significantly different ADC measurements between left and right liver lobes ( p = 0 . 0078 $$ p=0.0078 $$ , reproducibility coefficients (RPC) =  470 × 1 0 - 6 $$ 470\times 1{0}^{-6} $$ mm 2 $$ {}^2 $$ /s for monopolar-msEPI), while M1-optimized waveforms showed more reproducible ADC values ( p = 0 . 29 $$ p=0.29 $$ , RPC = 220 × 1 0 - 6 $$ \mathrm{RPC}=220\times 1{0}^{-6} $$ mm 2 $$ {}^2 $$ /s for M1-optimized-msEPI). In phantom and healthy volunteer studies, motion-robust acquisitions with msEPI showed significantly reduced image distortion ( p < 0 . 001 $$ p<0.001 $$ ) compared to ssEPI. Patient scans showed reduction of wormhole artifacts when combining M1-optimized waveforms with msEPI., Conclusion: Synergistic effects of combined M1-optimized diffusion waveforms and msEPI acquisitions enable reproducible liver DWI with motion robustness, blood signal suppression, and reduced distortion., (© 2022 The Authors. Magnetic Resonance in Medicine published by Wiley Periodicals LLC on behalf of International Society for Magnetic Resonance in Medicine.)

4D Flow MRI is a diagnostic tool that can visualize and quantify patient-specific hemodynamics and help interventionalists optimize treatment strategies for repairing coarctation of the aorta (COA). Despite recent developments in 4D Flow MRI, shortcomings include phase-offset errors, limited spatiotemporal resolution, aliasing, inaccuracies due to slow aneurysmal flows, and distortion of images due to metallic artifact from vascular stents. To address these limitations, we developed a framework utilizing Computational Fluid Dynamics (CFD) with Adaptive Mesh Refinement (AMR) that enhances 4D Flow MRI visualization/quantification. We applied this framework to five pediatric patients with COA, providing in-vivo and in-silico datasets, pre- and post-intervention. These two data sets were compared and showed that CFD flow rates were within 9.6% of 4D Flow MRI, which is within a clinically acceptable range. CFD simulated slow aneurysmal flow, which MRI failed to capture due to high relative velocity encoding (V enc ). CFD successfully predicted in-stent blood flow, which was not visible in the in-vivo data due to susceptibility artifact. AMR improved spatial resolution by factors of 10 1 to 10 3 and temporal resolution four-fold. This computational framework has strong potential to optimize visualization/quantification of aneurysmal and in-stent flows, improve spatiotemporal resolution, and assess hemodynamic efficiency post-COA treatment., (© 2022. The Author(s) under exclusive licence to Biomedical Engineering Society.)

Purpose: To determine the variability of blood flow measurements using 4D flow MRI in the portal and mesenteric circulations and to characterize the effects of meal ingestion, time of day, and between-day (diurnal) variations on portal and mesenteric hemodynamics., Methods: In this IRB-approved and HIPAA-compliant study, 7 healthy and 7 portal hypertension patients imaged. MRI exams were conducted at 3 T using a 32-channel body coil with large volumetric coverage and 1.25-mm isotropic true spatial resolution. Blood flow was quantified (L/min) in the hepatic and splanchnic vasculature. The first MR scan was performed after at least 8 h of fasting. Subsequently, subjects ingested 574 mL EnSure Plus® orally. A second acquisition was started 20 min after the meal ingestion. A third scan was performed before lunch and a fourth acquisition took place 20 min after lunch. A fifth scan was performed around 4 pm. Finally, subjects returned one week later for a repeat morning visit, with identical conditions as the first visit., Results: In healthy controls significant increase in blood flow was seen in the PV, SMV, SMA, HA, and SCAo in response to breakfast but only the SCAo, SMA, SMV, and PV had a significant response to lunch. In general, patients with cirrhosis showed reduced response to meals compared to that in healthy controls. Additionally, PV flow in patients had the highest value in the afternoon., Conclusion: Effects of meal ingestion, time of day, and between-day variations were characterized using Radial 4D flow MRI in patients with cirrhosis and healthy controls., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Evaluation of the hemodynamics in the portal venous system plays an essential role in many hepatic pathologies. Changes in portal flow and vessel morphology are often indicative of disease.Routinely used imaging modalities, such as CT, ultrasound, invasive angiography, and MRI, often focus on either hemodynamics or anatomical imaging. In contrast, 4D flow MRI facilitiates a more comprehensive understanding of pathophysiological mechanisms by simultaneously and noninvasively acquiring time-resolved flow and anatomical information in a 3D imaging volume.Though promising, 4D flow MRI in the portal venous system is especially challenging due to small vessel calibers, slow flow velocities, and breathing motion. In this review article, we will discuss how to account for these challenges when planning and conducting 4D flow MRI acquisitions in the upper abdomen. We will address patient preparation, sequence acquisition, postprocessing, quality control, and analysis of 4D flow data.In the second part of this article, we will review potential clinical applications of 4D flow MRI in the portal venous system. The most promising area for clinical utilization is the diagnosis and grading of liver cirrhosis and its complications. Relevant parameters acquired by 4D flow MRI include the detection of reduced or reversed flow in the portal venous system, characterization of portosystemic collaterals, and impaired response to a meal challenge. In patients with cirrhosis, 4D flow MRI has the potential to address the major unmet need of noninvasive detection of gastroesophageal varices at high risk for bleeding. This could replace many unnecessary, purely diagnostic, and invasive esophagogastroduodenoscopy procedures, thereby improving patient compliance with follow-up. Moreover, 4D flow MRI offers unique insights and added value for surgical planning and follow-up of multiple hepatic interventions, including transjugular intrahepatic portosystemic shunts, liver transplantation, and hepatic disease in children. Lastly, we will discuss the path to clinical implementation and remaining challenges.

Purpose: To assess the effects of cardiovascular-induced motion on conventional DWI of the pancreas and to evaluate motion-robust DWI methods in a motion phantom and healthy volunteers., Methods: 3T DWI was acquired using standard monopolar and motion-compensated gradient waveforms, including in an anatomically accurate pancreas phantom with controllable compressive motion and healthy volunteers (n = 8, 10). In volunteers, highly controlled single-slice DWI using breath-holding and cardiac gating and whole-pancreas respiratory-triggered DWI were acquired. For each acquisition, the ADC variability across volunteers, as well as ADC differences across parts of the pancreas were evaluated., Results: In motion phantom scans, conventional DWI led to biased ADC, whereas motion-compensated waveforms produced consistent ADC. In the breath-held, cardiac-triggered study, conventional DWI led to heterogeneous DW signals and highly variable ADC across the pancreas, whereas motion-compensated DWI avoided these artifacts. In the respiratory-triggered study, conventional DWI produced heterogeneous ADC across the pancreas (head: 1756 ± 173 × 10 -6 mm 2 /s; body: 1530 ± 338 × 10 -6 mm 2 /s; tail: 1388 ± 267 × 10 -6 mm 2 /s), with ADCs in the head significantly higher than in the tail (P < .05). Motion-compensated ADC had lower variability across volunteers (head: 1277 ± 102 × 10 -6 mm 2 /s; body: 1204 ± 169 × 10 -6 mm 2 /s; tail: 1235 ± 178 × 10 -6 mm 2 /s), with no significant difference (P ≥ .19) across the pancreas., Conclusion: Cardiovascular motion introduces artifacts and ADC bias in pancreas DWI, which are addressed by motion-robust DWI., (© 2021 International Society for Magnetic Resonance in Medicine.)

Objective: This study assessed the ability of hemodynamic simulations to predict the success of catheter interventions in a swine model of branch pulmonary artery stenosis (bPAS)., Background: bPAS commonly occurs in congenital heart disease and is often managed with catheter based interventions. However, despite technical success, bPAS interventions do not lead to improved distal pulmonary blood flow (PBF) distribution in approximately 1/3rd of patients. New tools are needed to better identify which patients with bPAS would most benefit from catheter interventions., Methods: For 13 catheter intervention cases in swine with surgically created left PAS (LPAS), PA pressures from right heart catheterization (RHC) and PBF distributions from MRI were measured before and after catheter interventions. Hemodynamic simulations with a reduced order computational fluid dynamics (CFD) model were performed using non-invasive PBF measurements derived from MRI, and then correlated with changes in invasive measures of hemodynamics and PBF distributions before and after catheter intervention to relieve bPAS., Results: Compared to experimentally measured changes in left PBF distribution, simulations had a small bias (3.4 ± 11.1%), moderate agreement (ICC = 0.69 [0.24-0.90], 0.71 [0.23-0.91]), and good diagnostic capability to predict successful interventions (> 20% PBF increase) (AUC 0.83 [0.59-1.0]). Simulations had poorer prediction of changes in stenotic pressure gradient (ICC = 0.28 [- 0.33 to 0.73], r = 0.57 [- 0.04 to 0.87]) and MPA systolic pressure (ICC = 0.00 [- 0.52 to 0.53], r = 0.29 [- 0.32 to 0.72])., Conclusion: While there was only weak to moderate agreement between predicted and measured changes in PA pressures and pulmonary blood flow distributions, hemodynamic simulations did show good diagnostic value for predicting successful versus unsuccessful catheter based interventions to relieve bPAS. The results of this proof of concept study are promising and should encourage future development for using hemodynamic models in planning interventions for patients with bPAS., (© 2021. Biomedical Engineering Society.)

A distributed lumped parameter (DLP) model of blood flow was recently developed that can be simulated in minutes while still incorporating complex sources of energy dissipation in blood vessels. The aim of this work was to extend the previous DLP modeling framework to include fluid-structure interactions (DLP-FSI). This was done by using a simple compliance term to calculate pressure that does not increase the simulation complexity of the original DLP models. Verification and validation studies found DLP-FSI simulations had good agreement compared to analytical solutions of the wave equations, experimental measurements of pulsatile flow in elastic tubes, and in vivo MRI measurements of thoracic aortic flow. This new development of DLP-FSI allows for significantly improved computational efficiency of FSI simulations compared to FSI approaches that solve the full 3D conservation of mass and momentum equations while also including the complex sources of energy dissipation occurring in cardiovascular flows that other simplified models neglect., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Branch pulmonary artery stenosis (PAS) commonly occurs in congenital heart disease and the pressure gradient over a stenotic PA lesion is an important marker for re-intervention. Image based computational fluid dynamics (CFD) has shown promise for non-invasively estimating pressure gradients but one limitation of CFD is long simulation times. The goal of this study was to compare accelerated predictions of PAS pressure gradients from 3D CFD with instantaneous adaptive mesh refinement (AMR) versus a recently developed 0D distributed lumped parameter CFD model. Predictions were then experimentally validated using a swine PAS model (n = 13). 3D CFD simulations with AMR improved efficiency by 5 times compared to fixed grid CFD simulations. 0D simulations further improved efficiency by 6 times compared to the 3D simulations with AMR. Both 0D and 3D simulations underestimated the pressure gradients measured by catheterization (- 1.87 ± 4.20 and - 1.78 ± 3.70 mmHg respectively). This was partially due to simulations neglecting the effects of a catheter in the stenosis. There was good agreement between 0D and 3D simulations (ICC 0.88 [0.66-0.96]) but only moderate agreement between simulations and experimental measurements (0D ICC 0.60 [0.11-0.86] and 3D ICC 0.66 [0.21-0.88]). Uncertainty assessment indicates that this was likely due to limited medical imaging resolution causing uncertainty in the segmented stenosis diameter in addition to uncertainty in the outlet resistances. This study showed that 0D lumped parameter models and 3D CFD with instantaneous AMR both improve the efficiency of hemodynamic modeling, but uncertainty from medical imaging resolution will limit the accuracy of pressure gradient estimations., (© 2021. Biomedical Engineering Society.)

Purpose: Radial sampling is one method to accelerate 4D flow MRI acquisition, making feasible dual-velocity encoding (Venc) assessment of slow flow in the left ventricle (LV). Here, two radial trajectories are compared in vitro for this application: 3D radial (phase-contrast vastly undersampled isotropic projection, PC-VIPR) versus stack of stars (phase-contrast stack of stars, PC-SOS), with benchtop particle imaging velocimetry (PIV) serving as a reference standard., Methods: The study contained three steps: (1) Construction of an MRI- and PIV-compatible LV model from a healthy adult's CT images. (2) In vitro PIV using a pulsatile flow pump. (3) In vitro dual-Venc 4D flow MRI using PC-VIPR and PC-SOS (two repeat experiments). Each MR image set was retrospectively undersampled to five effective scan durations and compared with the PIV reference. The root-mean-square velocity vector difference (RMSE) between MRI and PIV images was compared, along with kinetic energy (KE) and wall shear stress (WSS)., Results: RMSE increased as scan time decreased for both MR acquisitions. RMSE was 3% lower in PC-SOS images than PC-VIPR images in 30-min scans (3.8 vs. 3.9 cm/s) but 98% higher in 2.5-min scans (9.5 vs. 4.8 cm/s). PIV intrasession repeatability showed a RMSE of 4.4 cm/s, reflecting beat-to-beat flow variation, while MRI had intersession RMSEs of 3.8/3.5 cm/s for VIPR/SOS, respectively. Speed, KE, and WSS were overestimated voxel-wise in 30-min MRI scans relative to PIV by 0.4/0.3 cm/s, 0.2/0.1 μJ/mL, and 36/43 mPa, respectively, for VIPR/SOS., Conclusions: PIV is feasible for application-specific 4D flow MRI protocol optimization. PC-VIPR is better-suited to dual-Venc LV imaging with short scan times., (© 2021 International Society for Magnetic Resonance in Medicine.)

Stanford type B aortic dissection (TBAD) is associated with relatively high rates of morbidity and mortality, and appropriate treatment selection is important for optimizing patient outcomes. Depending on individualized risk factors, clinical presentation, and imaging findings, patients are generally stratified to optimal medical therapy anchored by antihypertensives or thoracic endovascular aortic repair (TEVAR). Using standard anatomic imaging with CT or MRI, several high-risk features including aortic diameter, false lumen (FL) features, size of entry tears, involvement of major aortic branch vessels, or evidence of visceral malperfusion have been used to select patients likely to benefit from TEVAR. However, even with these measures, the number needed to treat for TEVAR remains, and improved risk stratification is needed. Increasingly, the relationship between FL hemodynamics and adverse aortic remodeling in TBAD has been studied, and evolving noninvasive techniques can measure numerous FL hemodynamic parameters that may improve risk stratification. In addition to summarizing the current clinical state of the art for morphologic TBAD evaluation, this review provides a detailed overview of noninvasive methods for TBAD hemodynamics characterization, including computational fluid dynamics and four-dimensional flow MRI. Keywords: CT, Image Postprocessing, MRI, Cardiac, Vascular, Aorta, Dissection © RSNA, 2021., Competing Interests: Disclosures of Conflicts of Interest: Z.A.Z. disclosed no relevant relationships. A.B. disclosed no relevant relationships. S.C.M. disclosed no relevant relationships. A.W.H. disclosed no relevant relationships. C.K.M. disclosed no relevant relationships. P.V. disclosed no relevant relationships. N.S.B. Activities related to the present article: disclosed no relevant relationships. Activities not related to the present article: author’s institution receives royalties from and has patent pending with Imbio. Other relationships: disclosed no relevant relationships. A.R.A. disclosed no relevant relationships. J.D.C. Activities related to the present article: disclosed no relevant relationships. Activities not related to the present article: author’s institution has an investigator-initiated grant from Siemens Healthineers, not related to this work.; author received travel funding from Siemens Healthineers to attend a research summit between Mayo Clinic CT Innovation Center and Siemens Healthineers. Other relationships: disclosed no relevant relationships. C.J.F. Activities related to the present article: author is an associate editor of Radiology: Cardiothoracic Imaging (not involved in the handling of this article). Activities not related to the present article: disclosed no relevant relationships. Other relationships: disclosed no relevant relationships. B.D.A. Activities related to the present article: author’s institution has research grant from the American Heart Association. Activities not related to the present article: author received consultancy fee from Tempus Laboratory for expert image segmentation; author has Dixon translational research grant from Northwestern University and SCMR Seed Grant from Society for Cardiovascular Magnetic Resonance; author received payment from Medscape for development of educational presentations. Other relationships: disclosed no relevant relationships., (2021 by the Radiological Society of North America, Inc.)

Branch pulmonary artery stenosis (PAS) commonly occurs in congenital heart disease and it has previously been hypothesized that in branch PAS the pulmonary arteries (PAs) remodel their lumen diameter to maintain constant wall shear stress (WSS). We quantified the longitudinal progression of PA WSS in a swine model of unilateral PAS and two different intervention time courses to test this hypothesis. To quantify WSS in the entire pulmonary tree we used 4D Flow MRI for the large-proximal PAs and a structured tree model for the small-distal PAs. Our results only partially supported the hypothesis that in branch PAS the PAs remodel their lumen diameter to maintain WSS homeostasis. Proximal PA WSS was similar between groups at the final study time-point but WSS of mid-sized (5 mm to 500 μm) PA segments was found to be different between the sham and LPAS groups. This suggests that WSS homeostasis may only be achieved for the large-proximal PAs. Additionally, our results do not show WSS homeostasis being achieved over shorter periods of time suggesting that any potential WSS dependent changes in PA lumen diameter were a long-term remodeling response rather than a short-term vasodilation response. Future studies should confirm if these findings hold true in humans and investigate the impacts of WSS at different levels of the pulmonary tree on growth.

Blood flow metrics obtained with four-dimensional (4D) flow phase contrast (PC) magnetic resonance imaging (MRI) can be of great value in clinical and experimental cerebrovascular analysis. However, limitations in both quantitative and qualitative analyses can result from errors inherent to PC MRI. One method that excels in creating low-error, physics-based, velocity fields is computational fluid dynamics (CFD). Augmentation of cerebral 4D flow MRI data with CFD-informed neural networks may provide a method to produce highly accurate physiological flow fields. In this preliminary study, the potential utility of such a method was demonstrated by using high resolution patient-specific CFD data to train a convolutional neural network, and then using the trained network to enhance MRI-derived velocity fields in cerebral blood vessel data sets. Through testing on simulated images, phantom data, and cerebrovascular 4D flow data from 20 patients, the trained network successfully de-noised flow images, decreased velocity error, and enhanced near-vessel-wall velocity quantification and visualization. Such image enhancement can improve experimental and clinical qualitative and quantitative cerebrovascular PC MRI analysis.

Accurate pulmonary artery (PA) imaging is necessary for management of patients with complex congenital heart disease (CHD). The ability of newer imaging modalities such as 3D rotational angiography (3DRA) or phase-contrast magnetic resonance angiography (PC-MRA) to measure PA diameters has not been compared to established angiography techniques. Measurements of PA diameters (including PA stenosis and PA stents) from 3DRA and non-contrast-enhanced PC-MRA were compared to 2D catheter angiography (CA) and multi-slice computed tomography (MSCT) in a swine CHD model (n = 18). For all PA segments 3DRA had excellent agreement with CA and MSCT (ICC = 0.94[0.91-0.95] and 0.92[0.89-0.94]). 3DRA PA stenosis measures were similar to CA and MSCT and 3DRA was on average within 5% of 10.8 ± 1.3 mm PA stent diameters from CA and MSCT. For compliant PA segments, 3DRA was on average 3-12% less than CA (p < 0.05) and MSCT (p < 0.01) for 6-14 mm vessels. PC-MRA could not reliably visualize stents and distal PA vessels and only identified 34% of all assigned measurement sites. For measured PA segments, PC-MRA had good agreement to CA and MSCT (ICC = 0.87[0.77-0.92] and 0.83[0.72-0.90]) but PC-MRA overestimated stenosis diameters and underestimated compliant PA diameters. Excellent CA-MSCT PA diameter agreement (ICC = 0.95[0.93-0.96]) confirmed previous data in CHD patients. There was little bias in PA measurements between 3DRA, CA and MSCT in stenotic and stented PAs but 3DRA underestimates measurements of compliant PA regions. Accurate PC-MRA imaging was limited to unstented proximal PA anatomy.

Objectives: Compare lung parenchymal and pulmonary artery (PA) growth and hemodynamics following early and delayed PA stent interventions for treatment of unilateral branch PA stenosis (PAS) in swine., Background: How the pulmonary circulation remodels in response to different durations of hypoperfusion and how much growth and function can be recovered with catheter directed interventions at differing time periods of lung development is not understood., Methods: A total of 18 swine were assigned to four groups: Sham (n = 4), untreated left PAS (LPAS) (n = 4), early intervention (EI) (n = 5), and delayed intervention (DI) (n = 5). EI had left pulmonary artery (LPA) stenting at 5 weeks (6 kg) with redilation at 10 weeks. DI had stenting at 10 weeks. All underwent right heart catheterization, computed tomography, magnetic resonance imaging, and histology at 20 weeks (55 kg)., Results: EI decreased the extent of histologic changes in the left lung as DI had marked alveolar septal and bronchovascular abnormalities (p = .05 and p < .05 vs. sham) that were less prevalent in EI. EI also increased left lung volumes and alveolar counts compared to DI. EI and DI equally restored LPA pulsatility, R heart pressures, and distal LPA growth. EI and DI improved, but did not normalize LPA stenosis diameter (LPA/DAo ratio: Sham 1.27 ± 0.11 mm/mm, DI 0.88 ± 0.10 mm/mm, EI 1.01 ± 0.09 mm/mm) and pulmonary blood flow distributions (LPA-flow%: Sham 52 ± 5%, LPAS 7 ± 2%, DI 44 ± 3%, EI 40 ± 2%)., Conclusion: In this surgically created PAS model, EI was associated with improved lung parenchymal development compared to DI. Longer durations of L lung hypoperfusion did not detrimentally affect PA growth and R heart hemodynamics. Functional and anatomical discrepancies persist despite successful stent interventions that warrant additional investigation., (© 2020 Wiley Periodicals LLC.)

Purpose: Preeclampsia (PE) is a pregnancy complication of abnormally elevated blood pressure and organ damage where endothelial function is impaired. Wall shear stress (WSS) strongly effects endothelial cell morphology and function but in PE the WSS values are unknown. WSS calculations from ultrasound inaccurately assume cylindrical arteries and patient specific computational fluid dynamics (CFD) typically require time-consuming 3D imaging such as CT or MRI., Methods: Two-dimensional (2D) B-mode ultrasound images were lofted together to create simplified three-dimensional (3D) geometries of the brachial artery (BA) that incorporate artery curvature and non-circular cross sections. This process was efficient and on average took 120 ± 10 s. Patient specific CFD was then performed to quantify BA WSS for a small cohort of PE (n = 5) and normotensive pregnant patients (n = 5) and compared against WSS calculations assuming a cylindrical artery., Results: For several WSS metrics (time averaged WSS (TAWSS), peak systolic WSS, oscillatory shear index (OSI), OSI/TAWSS and relative residence time) CFD on the simplified arterial geometries calculated large spatial differences in WSS that assuming a cylindrical artery cannot calculate. Bland-Altman and intra-class correlation (ICC) analyses found assuming a cylindrical artery both underestimated (p < 0.05) and had poor agreement (ICC < 0.5) with the maximum WSS values from CFD. WSS values that were abnormal compared to the normotensive patients (OSI = 0.014 ± 0.026) appear related to the pregnancy complications fetal growth restriction (n = 2, OSI = 0.14, 0.25) and gestational diabetes (n = 1, OSI = 0.23)., Conclusion: Creating 3D artery geometries from 2D ultrasound images can be used for CFD simulations to calculate WSS from ultrasound without assuming cylindrical arteries. This approach requires minimal time for both medical imaging and CFD analysis.

Aneurysm rupture has been suggested to be related to aneurysm geometry, morphology, and complex flow activity; therefore, understanding aneurysm-specific hemodynamics is crucial. 4D Flow MRI has been shown to be a feasible tool for assessing hemodynamics in intracranial aneurysms with high spatial resolution. However, it requires averaging over multiple heartbeats and cannot account for cycle-to-cycle hemodynamics variations. This study aimed to assess cycle-to-cycle flow dynamics variations in a patient-specific intracranial aneurysm model using tomographic particle image velocimetry (tomo-PIV) at a high image rate under pulsatile flow conditions. Time-resolved and time-averaged velocity flow fields within the aneurysm sac and estimations of wall shear stress (WSS) were compared with those from 4D Flow MRI. A one-way ANOVA showed a significant difference between cardiac cycles (p value < 0.0001); however, differences were not significant after PIV temporal and spatial resolution was matched to that of MRI (p value 0.9727). This comparison showed the spatial resolution to be the main contributor to assess cycle-to-cycle variability. Furthermore, the comparison with 4D Flow MRI between velocity components, streamlines, and estimated WSS showed good qualitative and quantitative agreement. This study showed the feasibility of patient-specific in-vitro experiments using tomo-PIV to assess 4D Flow MRI with high repeatability in the measurements.

Purpose: Particle image velocimetry (PIV), an in vitro experimentation technique that optically measures velocity components to analyze fluid velocity fields, has become increasingly popular to study flow dynamics in various vascular territories. However, it can be difficult and expensive to create patient-specific clear models for PIV due to the importance of refractive index matching of the model and the fluid. We aim to implement and test the use of poly-vinyl alcohol (PVA) in a lost-core casting technique to create low-cost, patient-specific models for PIV., Methods: Anonymized patient vascular anatomies were segmented and processed in Mimics/3Matic to create patient-specific cores from 3D digital subtraction angiographies. The cores were 3D-printed with PVA and post-processed with a 80:20 water:glue mixture to smooth the surface. Two silicones, Sylgard 184 and Solaris, were used to encapsulate the model and the PVA core was dissolved using warm water. Computed tomography scans were used to evaluate geometric accuracy using circumferences and surface differences in the model., Results: Mean geometric differences in circumference along the inlet centerline and the mean surface difference in the aneurysm between the final Silicone Model and the desired STL Print geometry were statistically insignificant (0.6 mm, 95% CI [- 1.4, 2.8] and 0.3 mm 95% CI [- 0.1, 0.7], respectively). Particle illumination within each model was successful. The cost of one 10 cm × 10 cm × 5 cm model was $69., Conclusion: This technique was successful to implement and test the use of PVA in a lost-core casting technique to create low-cost, patient-specific in vitro models for PIV experimentation.

Accurate image based cardiovascular simulations require patient specific boundary conditions (BCs) for inlets, outlets and vessel wall mechanical properties. While inlet BCs are typically determined non-invasively, invasive pressure catheterization is often used to determine patient specific outlet BCs and vessel wall mechanical properties. A method using 4D Flow MRI to non-invasively determine both patient specific outlet BCs and vessel wall mechanical properties is presented and results for both in vitro validation with a latex tube and an in vivo pulmonary artery stenosis (PAS) stent intervention are presented. For in vitro validation, acceptable agreement is found between simulation using BCs from 4D Flow MRI and benchtop measurements. For the PAS virtual intervention, simulation correctly predicts flow distribution with 9% error compared to MRI. Using 4D Flow MRI to noninvasively determine patient specific BCs increases the ability to use image based simulations as pressure catheterization is not always performed.

Benign prostatic hyperplasia (BPH) develops in the majority of men as they age. As a result, lower urinary tract symptoms (LUTS) often develop, which significantly decrease quality of life. One model of studying BPH/LUTS in mice is to use a hormone-induced model of lower urinary tract dysfunction (LUTD), but current methods for studying endpoints require multiple analysis techniques that contribute to an overall lengthy process. However, developments in magnetic resonance imaging (MRI) have opened the door for more accurate and time efficient methods. The purpose of this study was to demonstrate the capabilities of MRI for the analysis of LUTD in mice. To do this, whole and partial urogenital tracts were extracted from mice and imaged on a 9.4 Tesla MRI system. Additionally, a device was designed and fabricated to aid in the imaging of up to 100 mouse urogenital tracts in a single imaging session. Images were processed for both qualitative representation of MRI resolution capabilities and quantitative measurements of urogenital tract components. Even the smallest anatomical structures of the urogenital tracts were resolved and quantified, including the ureters, urethra, ductus deferens, and fine nodules and textures on the seminal vesicles, bladder, and prostatic lobes. The visual representations and urogenital component quantifications demonstrated in this study may be of value in lesion detection, diagnosis, and LUTS symptom progression tracking., Competing Interests: None.

Four-dimensional (4D) Flow magnetic resonance imaging (MRI) enables the acquisition and assessment of complex hemodynamics in vivo from different vascular territories. This study investigated the viability of stereoscopic and tomographic particle image velocimetry (stereo- and tomo-PIV, respectively) as experimental validation techniques for 4D Flow MRI. The experiments were performed using continuous and pulsatile flows through an idealized carotid artery bifurcation model. Transverse and longitudinal planes were extracted from the acquired velocity data sets at different regions of interest and were analyzed with a point-by-point comparison. An overall root-mean-square error (RMSE) was calculated resulting in errors as low as 0.06 and 0.03 m/s when comparing 4D Flow MRI with stereo- and tomo-PIV, respectively. Quantitative agreement between techniques was determined by evaluating the relationship for individual velocity components and their magnitudes. These resulted in correlation coefficients (R 2 ) of 4D Flow MRI with stereo- and tomo-PIV, as low as 0.76 and 0.73, respectively. The 3D velocity measurements from PIV showed qualitative agreement when compared to 4D Flow MRI, especially with tomo-PIV due to the addition of volumetric velocity measurements. These results suggest that tomo-PIV can be used as a validation technique for 4D Flow MRI, serving as the basis for future validation protocols.

Purpose: Arterial stiffness has predictive value for cardiovascular disease (CVD). Local artery stiffness can provide insight on CVD pathology and may be useful for diagnosis and prognosis. However, current methods are invasive, require real-time expertise for measurement, or are limited by arterial region. 4D Flow MRI can non-invasively measure local stiffness by estimating local pulse wave velocity (PWV). This technique can be applied to vascular regions, previously accessible only by invasive stiffness measurement methods. MRI PWV data can also be analyzed post-exam. However, 4D Flow MRI requires validation before it is used in vivo to measure local PWV., Methods: PWV, calculated from 4D Flow MRI and a benchtop experiment, was compared with petersons elastic modulus (PEM) of in vitro models. PEM was calculated using high-speed camera images and pressure transducers. Three transit-time algorithms were analyzed for PWV measurement accuracy and precision., Results: PWV from 4D Flow MRI and reference benchtop experiments show strong correlation with PEM (R 2  = 0.99). The cross correlation transit-time algorithm showed the lowest percent difference between 4D Flow MRI and benchtop experiments (4-7%), and the point to point of 50% upstroke algorithm had the highest transit-time vs. distance data average R 2 (0.845)., Conclusion: 4D Flow MRI is a feasible method for estimating local PWV in simple in vitro models and is a viable tool for clinical analysis. In addition, choice in transit-time algorithm depends on flow waveform shape and arterial region. This study strengthens the validity of 4D Flow MRI local PWV measurement in simple models. However, this technique requires validation in more complex models before it is used in vivo.

Background and Purpose: Safe and effective use of newly developed devices for aneurysm treatment requires the ability to make accurate measurements in the angiographic suite. Our purpose was to determine the parameters that optimize the geometric accuracy of three-dimensional (3D) vascular reconstructions., Methods: An in vitro flow model consisting of a peristaltic pump, plastic tubing, and 3D printed patient-specific aneurysm models was used to simulate blood flow in an intracranial aneurysm. Flow rates were adjusted to match values reported in the literature for the internal carotid artery. 3D digital subtraction angiography acquisitions were obtained using a commercially available biplane angiographic system. Reconstructions were done using Edge Enhancement (EE) or Hounsfield Unit (HU) kernels and a Normal or Smooth image characteristic. Reconstructed images were analyzed using the vendor's aneurysm analysis tool. Ground truth measurements were derived from metrological scans of the models with a microCT. Aneurysm volume, surface area, dome height, minimum and maximum ostium diameter were determined for the five models., Results: In all cases, measurements made with the EE kernel most closely matched ground truth values. Differences in values derived from reconstructions displayed with Smooth or Normal image characteristics were small and had only little impact on the geometric parameters considered., Conclusions: Reconstruction parameters impact the accuracy of measurements made using the aneurysm analysis tool of a commercially available angiographic system. Absolute differences between measurements made using reconstruction parameters determined as optimal in this study were, overall, very small. The significance of these differences, if any, will depend on the details of each individual case., Competing Interests: Competing interests: None declared., (Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.)

Purpose: To measure the effects of using time-resolved (TR) versus time-averaged (TA) ventricular segmentation on four-dimensional flow-sensitive (4D flow) magnetic resonance imaging (MRI) kinetic energy (KE) calculations., Materials and Methods: Right (RV) and left (LV) ventricular KE was calculated from 4D flow MRI data acquired at 3.0T in 10 healthy volunteers and five subjects with cardiac disease using TR and TA segmentation. KE was calculated from the mass of blood within the ventricles multiplied by the velocities squared. Differences in TR and TA KE and interobserver variability were quantified with Bland-Altman analysis., Results: In healthy volunteers, peak systolic RV KE (KE RV ) were 4.89 ± 1.49 mJ using TR and 5.53 ± 1.62 mJ using TA segmentation (P = 0.016); peak systolic LV KE (KE LV ) were 3.29 ± 0.96 mJ and 4.16 ± 1.26 mJ (P = 0.005). Peak diastolic KE RV were 3.33 ± 0.90 mJ (TR) and 3.61 ± 1.12 mJ (TA) (P = 0.082), while peak diastolic KE LV were 4.90 ± 1.49 mJ and 5.31 ± 1.59 mJ (P = 0.044). In patient volunteers, peak systolic KE RV were 4.34 ± 3.78 mJ using TR and 4.88 ± 3.98 mJ using TA segmentation (P = 0.26); peak systolic KE LV were 4.39 ± 4.21 mJ and 4.36 ± 3.84 mJ (P = 0.91). Peak diastolic KE RV were 3.34 ± 2.08 mJ (TR) and 4.05 ± 1.12 mJ (TA) (P = 0.08), while peak diastolic KE LV were 4.34 ± 5.11 mJ and 4.06 ± 3.47 mJ (P = 0.75). Interobserver differences in KE LV were greater for TR than TA calculations; bias ranged from 3 ± 30% for TA peak systolic KE LV to 36 ± 30% for TR peak diastolic KE LV ., Conclusion: Although qualitatively similar, KE values calculated through TA segmentation were consistently greater than TR KE, with differences more pronounced during systole and in the LV., Level of Evidence: 2 J. Magn. Reson. Imaging 2017;45:821-828., (© 2016 International Society for Magnetic Resonance in Medicine.)

Objective: Comprehensive assessment of abdominal hemodynamics is crucial for many clinical diagnoses but is challenged by a tremendous complexity of anatomy, normal physiology, and a wide variety of pathologic abnormalities. This article introduces 4D flow MRI as a powerful technique for noninvasive assessment of the hemodynamics of abdominal vascular territories., Conclusion: Four-dimensional flow MRI provides clinicians with a more extensive and straightforward approach to evaluate disorders that affect blood flow in the abdomen. This review presents a series of clinical cases to illustrate the utility of 4D flow MRI in the comprehensive assessment of the abdominal circulation.