Search

We report the experimental characterization and finite element modeling of magnetic fluid hyperthermia (MFH) in tissue-like media using tetramethyl ammonium hydroxide coated superparamagnetic iron oxide magnetic nanoparticles (MNPs) of size ∼19.6 ± 1.2 nm, prepared using a co-precipitation technique. MFH properties are probed for the MNPs in ∼1 wt. % agar, resembling the tumor and surrounding normal tissues. The field-induced temperature rise (ΔT) is experimentally measured in real-time utilizing an infrared camera. A finite element model (FEM) is utilized to simulate the spatiotemporal variations in the thermal profiles, which are found to be in good agreement with the experimental data. FEM-based parametric studies reveal that the thermal conductivity of the medium is the most significant parameter influencing the thermal profiles. The spatiotemporal variations in the thermal profiles are numerically studied for seven different tissues, and the obtained results indicate the highest ΔT for the breast tissue in the tumor and the surrounding regions, which is due to the lowest volumetric specific heat and the highest thermal conductivity of the breast tissue, respectively. Numerical studies on the thermal profiles for sub-surface tumors with parametrically varying depths indicate a strong exponential correlation between the surface and tumor temperature, where the regression coefficients are found to be correlated with the thermo-physical properties of the tissues. The obtained findings are beneficial for developing a simplistic and easily deployable framework for a priori generation of the thermal profiles for various tissues during MFH, which is useful for appropriate planning and parameter selection for MFH-based therapy. [ABSTRACT FROM AUTHOR]

Iron oxide nanoparticles have been widely used in various fields of study. Due to the increasing use of these nanoparticles, it is important to develop sensitive methods for measuring these nanoparticles in real samples. In this research, a method was developed to measure magnetite nanoparticles using microfluidics science and paired emitter-detector diode-based photometry. The basis work of the designed system is based on the magnetic preconcentration of nanoparticles inside the microchip, dissolution by acid, and creation of a signal through the formation of an iron-thiocyanate complex. The validation results of the method showed that the linear range of the method is from 1.0 to 6.0 ppm with appropriate accuracy (recovery percentages: 104.0% and 95.6%) and precision (coefficient of variation: 0.17% and 0.15%), which is satisfactory for measuring trace amounts of magnetic nanoparticles. The limits of detection and quantification were obtained as 0.3 and 0.9 ppm, respectively. Compared to previously reported methods, the developed method provides higher sensitivity and simpler instrumentation of lower analysis cost by the use of a microfluidic chip for magnetic preconcentration of magnetic nanoparticles, washing, dissolution, and photometric determination. [ABSTRACT FROM AUTHOR]

Hyperthermia therapy refers to the elevating of a region in the body for therapeutic purposes. Different techniques have been applied for hyperthermia therapy including laser, microwave, radiofrequency, ultrasonic, and magnetic nanoparticles and the latter have received great attention in recent years. Magnetic hyperthermia in cancer therapy aims to increase the temperature of the body tissue by locally delivering heat from the magnetic nanoparticles to cancer cells with the aid of an external alternating magnetic field to kill the cancerous cells or prevent their further growth. This review introduces magnetic hyperthermia with magnetic nanoparticles. It includes the mechanism of the operation and magnetism behind the magnetic hyperthermia phenomenon. Different synthesis methods and surface modification to enhance the biocompatibility, water solubility, and stability of the nanoparticles in physiological environments have been discussed. Recent research on versatile types of magnetic nanoparticles with their ability to increase the local temperature has been addressed. [ABSTRACT FROM AUTHOR]

Protein-based nanoparticles have garnered significant attention in theranostic applications due to their superior biocompatibility, exceptional biodegradability and ease of functionality. Compared to other nanocarriers, protein-based nanoparticles offer additional advantages, including biofunctionality and precise molecular recognition abilities, which make them highly effective in navigating complex biological environments. Moreover, proteins can serve as powerful tools with self-assembling structures and reagents that enhance cell penetration. And their derivation from abundant renewable sources and ability to degrade into harmless amino acids further enhance their suitability for biomedical applications. However, protein-based nanoparticles have so far not realized their full potential. In this review, we summarize recent advances in the use of protein nanoparticles in tumor diagnosis and treatment and outline typical methods for preparing protein nanoparticles. The review of protein nanoparticles may provide useful new insights into the development of biomaterial fabrication. [Display omitted] • The nano-platforms for theranostics by utilizing protein nanoparticles are reviewed. • Protein nanoparticles-based theranostics has good and tunable imaging and therapeutic modalities • Current defects and prospects of protein nanoparticles are also discussed. [ABSTRACT FROM AUTHOR]

Cancer cells have higher heat sensitivity compared to normal cells; therefore, hyperthermia is a promising approach for cancer therapy because of its ability to selectively kill cancer cells by heating them. However, the specific and rapid heating of tumor tissues remains challenging. This study investigated the potential of magnetic nanoparticles (MNPs) modified with tumor-homing peptides (THPs), specifically PL1 and PL3, for tumor-specific magnetic hyperthermia therapy. The synthesis of THP-modified MNPs involved the attachment of PL1 and PL3 peptides to the surface of the MNPs, which facilitated enhanced tumor cell binding and internalization. Cell specificity studies revealed an increased uptake of PL1- and PL3-MNPs by tumor cells compared to unmodified MNPs, indicating their potential for targeted delivery. In vitro hyperthermia experiments demonstrated the efficacy of PL3-MNPs in inducing tumor cell death when exposed to an alternating magnetic field (AMF). Even without exposure to an AMF, an additional ferroptotic pathway was suggested to be mediated by the nanoparticles. Thus, this study suggests that THP-modified MNPs, particularly PL3-MNPs, hold promise as a targeted approach for tumor-specific magnetic hyperthermia therapy. [ABSTRACT FROM AUTHOR]

Among brain tumors, glioblastoma (GBM) is very challenging to treat as chemotherapeutic drugs can only penetrate the brain to a limited extent due to the blood–brain barrier (BBB). Nanoparticles can be an attractive solution for the treatment of GBM as they can transport drugs across the BBB into the tumor. In this study, normal and GBM organoids comprising six brain cell types were developed and applied to study the uptake, BBB penetration, distribution, and efficacy of fluorescent, ultrasmall gold nanoparticles (AuTio-Dox-AF647s) conjugated with doxorubicin (Dox) and AlexaFluor-647-cadaverine (AF647) by confocal laser scanning microscopy (CLSM), using a mixture of dissolved doxorubicin and fluorescent AF647 molecules as a control. It was shown that the nanoparticles could easily penetrate the BBB and were found in normal and GBM organoids, while the dissolved Dox and AF647 molecules alone were unable to penetrate the BBB. Flow cytometry showed a reduction in glioblastoma cells after treatment with AuTio-Dox nanoparticles, as well as a higher uptake of these nanoparticles by GBM cells in the GBM model compared to astrocytes in the normal cell organoids. In summary, our results show that ultrasmall gold nanoparticles can serve as suitable carriers for the delivery of drugs into organoids to study BBB function. [ABSTRACT FROM AUTHOR]

Immobilization of enzymes is a very attractive technique to develop efficient and cost-effective bioprocesses. In present investigation, immobilization of partially purified α-galactosidase from Penicillium aculeatum APS1 (APS1αgal) was carried out on chitosan coated magnetic nanoparticles, Fe3O4. Immobilization conditions such as enzyme concentration, amount of chitosan coated magnetic nanoparticles (CMNP), pH and time for immobilization were optimised and maximum immobilization yield of 45 ± 2% and activity yield of 47 ± 3% were achieved. Immobilized particles were characterised by thermal analysis and Fourier transform infrared spectroscopy (FT-IR). The surface morphology of particles was studied by scanning electron microscopy (SEM). Moreover, biochemical properties of free and immobilized enzymes were compared. Thermostability and storage stability of APS1αgal were found to be improved after immobilization. Reusability of immobilized APS1αgal was assessed and it was found to retain 65% activity after 12 consecutive cycles. Further experiments were conducted to assess the ability of immobilized APS1αgal for removal of raffinose family oligosaccharides (RFO) in soymilk. During batch hydrolysis, about 80% removal of RFO was achieved. Hydrolysis of RFO was confirmed by TLC analysis. Immobilized APS1αgal was able to carry out hydrolysis of RFO up to 45% even after 7 cycles. Overall, results of this study show the potential of immobilized APS1αgal for efficient removal of non-digestible RFO in soymilk. [ABSTRACT FROM AUTHOR]

The current research article has investigated the synthesis and characterization of novel iron nanoparticles (INPs) from neem and betel leaves extract combination using response surface methodology–central composite design and coated with chitosan–curcumin (CCINPs) as a biocompatible and contrast agent for magnetic resonance imaging (MRI). The coating of INPs with chitosan and curcumin (CCINPs) was carried out using a simple, easy, chemical‐free ultrasonication method and characteristics were confirmed by UV–visible (Vis) spectrophotometer (UV–Vis), Fourier‐transform infrared spectroscopy, X‐ray diffraction, scanning electron microscope, atomic force microscopy, and vibrating sample magnetometer. The biocompatibility of the particles was ensured by conducting hemolytic and cell viability assays. The nanoparticle was found to be nonhemolytic (<5%) up to 150 μg/mL for both INPs and CCINPs. The cell viability was stable (peripheral blood mononuclear cells‐PBMCs) till 48 h at 150 μg/mL of INPs and CCINPs. Both the test results produced were found to be biocompatible and additionally, an in vitro MRI study of INPs and CCINPs demonstrated the efficiency of the nanoparticle as a negative contrast agent with enhanced contrast nature in CCINPs. Thus, overall results indicate that the green synthesized chemical‐free novel CCINPs could be a potential candidate for a wide range of applications such as MRI, drug delivery, and in magnetic fluid hyperthermia. [ABSTRACT FROM AUTHOR]

Currently, one of the main causes of death in the world is cancer; therefore, it is urgent to obtain a precocious diagnosis, as well as boost research and development of new potential treatments, which should be more efficient and much less invasive for the patient. Magnetic hyperthermia (MH) is an emerging cancer therapy using nanoparticles, which has proved to be effective when combined with chemotherapy, radiotherapy and/or surgery, or even by itself, depending on the type and location of the tumor's cells. This article presents the results obtained by using a previously developed economic homemade hyperthermia device with different types of magnetite nanoparticles, with sizes ranging between 12 ± 5 and 36 ± 11 nm and presenting different shapes (spherical and cubic particles). These magnetic nanoparticles (MNPs) were synthesized by three different methods (co-precipitation, solvothermal and hydrothermal processes), with their final form being naked, or possessing different kinds of covering layers (polyethylene glycol (PEG) or citric acid (CA)). The parameters used to characterize the heating by magnetic hyperthermia, namely the Specific Absorption Rate (SAR) and the intrinsic loss power (ILP), have been obtained by two different methods. Among other results, these experiments allowed for the determination of which synthesized MNPs showed the best performance concerning hyperthermia. From the results, it may be concluded that, as expected, the shape of MNPs is an important factor, as well as the time that the MNPs can remain suspended in solution (which is directly related to the concentration and covering layer of the MNPs). The MNPs that gave the best results in terms of the SAR were the cubic particles covered with PEG, while in terms of total heating the spherical particles covered with citric acid proved to be better. [ABSTRACT FROM AUTHOR]

Driving immobilized, single-domain magnetic nanoparticles at high frequency by square wave fields instead of sinusoidal waveforms leads to qualitative and quantitative improvements in their performance both as point-like heat sources for magnetic hyperthermia and as sensing elements in frequency-resolved techniques such as magnetic particle imaging and magnetic particle spectroscopy. The time evolution and the frequency spectrum of the cyclic magnetization of magnetite nanoparticles with random easy axes are obtained by means of a rate-equation method able to describe time-dependent effects for the particle sizes and frequencies of interest in most applications to biomedicine. In the presence of a high-frequency square-wave field, the rate equations are shown to admit an analytical solution and the periodic magnetization can be therefore described with accuracy, allowing one to single out effects which take place on different timescales. Magnetic hysteresis effects arising from the specific features of the square-wave driving field results in a breakthrough improvement of both the magnetic power released as heat to an environment in magnetic hyperthermia treatments and the magnitude of the third harmonic of the frequency spectrum of the magnetization, which plays a central role in magnetic particle imaging. [ABSTRACT FROM AUTHOR]

Background: Radiation nanomedicines are nanoparticles labeled with radionuclides that emit α- or β-particles or Auger electrons for cancer treatment. We describe here our 15 years scientific journey studying locally-administered radiation nanomedicines for cancer treatment. We further present a view of the radiation nanomedicine landscape by reviewing research reported by other groups. Main body: Gold nanoparticles were studied initially for radiosensitization of breast cancer to X-radiation therapy. These nanoparticles were labeled with 111In to assess their biodistribution after intratumoural vs. intravenous injection. Intravenous injection was limited by high liver and spleen uptake and low tumour uptake, while intratumoural injection provided high tumour uptake but low normal tissue uptake. Further, [111In]In-labeled gold nanoparticles modified with trastuzumab and injected iintratumourally exhibited strong tumour growth inhibition in mice with subcutaneous HER2-positive human breast cancer xenografts. In subsequent studies, strong tumour growth inhibition in mice was achieved without normal tissue toxicity in mice with human breast cancer xenografts injected intratumourally with gold nanoparticles labeled with β-particle emitting 177Lu and modified with panitumumab or trastuzumab to specifically bind EGFR or HER2, respectively. A nanoparticle depot (nanodepot) was designed to incorporate and deliver radiolabeled gold nanoparticles to tumours using brachytherapy needle insertion techniques. Treatment of mice with s.c. 4T1 murine mammary carcinoma tumours with a nanodepot incorporating [90Y]Y-labeled gold nanoparticles inserted into one tumour arrested tumour growth and caused an abscopal growth-inhibitory effect on a distant second tumour. Convection-enhanced delivery of [177Lu]Lu-AuNPs to orthotopic human glioblastoma multiforme (GBM) tumours in mice arrested tumour growth without normal tissue toxicity. Other groups have explored radiation nanomedicines for cancer treatment in preclinical animal tumour xenograft models using gold nanoparticles, liposomes, block copolymer micelles, dendrimers, carbon nanotubes, cellulose nanocrystals or iron oxide nanoparticles. These nanoparticles were labeled with radionuclides emitting Auger electrons (111In, 99mTc, 125I, 103Pd, 193mPt, 195mPt), β-particles (177Lu, 186Re, 188Re, 90Y, 198Au, 131I) or α-particles (225Ac, 213Bi, 212Pb, 211At, 223Ra). These studies employed intravenous or intratumoural injection or convection enhanced delivery. Local administration of these radiation nanomedicines was most effective and minimized normal tissue toxicity. Conclusions: Radiation nanomedicines have shown great promise for treating cancer in preclinical studies. Local intratumoural administration avoids sequestration by the liver and spleen and is most effective for treating tumours, while minimizing normal tissue toxicity. [ABSTRACT FROM AUTHOR]

Heating magnetic nanoparticles (MNPs) with alternating magnetic fields (AMFs) have applications in biomedical research and cancer therapy. Accurate measurement of the heating efficiency or specific loss power (SLP) generated by the MNPs is essential to assess response(s) in biological systems. Efforts to develop standardized equipment and to harmonize results obtained from various MNP samples and AMF systems have met with little success. Without a standardized magnetic nanoparticle or calorimeter device, objective comparisons of estimated thermal output among laboratories remain a challenge. In addition, the most widely used adiabatic initial slope model fails to account for thermal losses, which are unavoidable. We propose a non-adiabatic method to analyze MNP heating efficiency derived from the Box–Lucas equation, wherein the sample is subjected to several short duration heating pulses. SLP is then estimated from an arithmetic average of the Box–Lucas fitted coefficients obtained from each pulse. Heating experiments were conducted with two identical samples that were placed within vessels having different thermal insulation using the same AMF parameters. Though the samples generated different temperature curves, the pulsed Box–Lucas method produced nearly equivalent SLP estimates. Further, the pulsed test enabled analysis of the heat transfer coefficient providing quantitative measures of sample heat loss throughout the test, with robust statistical confidence. We anticipate this new methodology will aid efforts to standardize measurements of MNP heating efficiency, enabling direct comparison among varied systems. [ABSTRACT FROM AUTHOR]

A magnetocaloric effect (MCE) with sizable isothermal entropy change (ΔS) maintained over a broad range of temperatures above the blocking temperature is reported for a rare earth-free superparamagnetic nanoparticle system comprising of Fe–TiN heterostructure. Superparamagnetic iron (Fe) particles were embedded in a titanium nitride (TiN) thin film matrix in a TiN/Fe/TiN multilayered pattern using a pulsed laser deposition method. High angle annular dark-field images in conjunction with dispersive energy analysis, recorded using scanning transmission electron microscopy, show a clear presence of alternating layers of Fe and TiN with a distinct atomic number contrast between Fe particles and TiN. Quantitative information about the isothermal entropy change (ΔS) and the magnetocaloric effect in the multilayer Fe–TiN system has been obtained by applying Maxwell relation to the magnetization vs temperature data at various fields. With the absence of a dynamic magnetic hysteresis above the blocking temperature, the negative ΔS as high as 4.18 × 103 J/Km3 (normal or forward MCE) is obtained at 3 T at 300 K. [ABSTRACT FROM AUTHOR]

An exciting prospect in the field of magnetic fluid hyperthermia (MFH) has been the integration of noble rare earth elements (Eu) with biopolymers (chitosan/dextran) that have optimum structures to tune specific effects on magnetic nanoparticles (NPs). However, the heating efficiency of MNPs is primarily influenced by their magnetization, size distribution, magnetic anisotropy, dipolar interaction, amplitude, and frequency of the applied field, the MNPs with high heating efficiency are still challenging. In this study, a comprehensive experimental analysis has been conducted on single-domain magnetic nanoparticles (SDMNPs) for evaluating effective anisotropy, assessing the impact of particle-intrinsic factors and experimental conditions on self-heating efficiency in both noninteracting and interacting systems, with a particular focus on the dipolar interaction effect. The study successfully reconciles conflicting findings on the interaction effects in the agglomeration and less agglomerated arrangements for MFH applications. The results suggest that effective control of dipolar interactions can be achieved by encapsulating Chitosan/Dextran in the synthesized MNPs. The lower dipolar interactions successfully tune the self-heating efficiency and hold promise as potential candidates for MFH applications. [ABSTRACT FROM AUTHOR]

Magnetotactic bacteria produce magnetite nanoparticles called magnetosomes at ambient conditions via a protein‐stabilized transient amorphous precursor to obtain precise control over particle size and morphology. In a bioinspired approach, such biomineralization processes are emulated, mimicking proteins involved in magnetosome formation using the positively charged analog poly‐L‐arginine. While the additive is expensive, it remains elusive whether the change in magnetite formation mechanism arises solely from the polymer's cationic nature. This study uses different mass‐produced and sustainably sourced polycations to induce the biomineralization‐reminiscent formation of magnetite nanoparticles. These findings present how to achieve control over nanoparticle size (from 10 to 159 nm) and morphology (compact and sub‐structured) as well as magnetic properties (superparamagnetic, stable‐single‐domain, vortex state) at ambient temperature and pressure using these additives. Furthermore, the formation of large nanoparticles with the addition of poly(diallyldimethylammonium chloride) (PDADMAC) at low alkalinity highlights how magnetotactic bacteria may produce magnetite nanoparticles under similar conditions. Confirming the polycations' ability to electrostatic stabilize amorphous ferrihydrite, it is anticipated that parametric in vitro studies on polymer properties will provide valuable insights into magnetite biomineralization and aid in rationally designing magnetic nanomaterials. [ABSTRACT FROM AUTHOR]

A novel platform on which anti-prostate specific membrane antigen (PSMA) antibodies were immobilized on the core–shell structure of iron oxide (Fe3O4)/6-phosphonohexanoic acid (6Pha) nanoparticles was developed for the specific detection of PSMA. The Fe3O4@SiO2@6Pha nanoparticles were selected as an immune sensing platform, and external magnetic force provided separation of the target PSMA antigen in biological samples. The core–shell Fe3O4@SiO2@6Pha nanoparticles conjugated with anti-PSMA antibodies were utilized for PSMA concentration measurement. The analysis strategy was based on the direct binding of anti-PSMA antibodies to the target PSMA antigens. Different electrochemical analysis approaches were utilized to characterize the biosensing system. The differences in impedimetric signals before and after interaction with PSMA antigens were associated directly with the PSMA concentration. Under optimized conditions, the linear range of 7.5–1250 pg mL−1, the detection limit of 2.21 pg mL−1, and the quantification limit of 7.36 pg mL−1 were obtained. The applicability of the immunosensor was tested on diluted human serum samples, and satisfactory results were obtained. The results illustrate that a reliable, robust, selective, and simple detection strategy was developed for further clinical diagnosis. [ABSTRACT FROM AUTHOR]

High cost and low operational stability are the most important challenges limiting the possible use of laccase in the removal of textile dyes. To overcome these challenges, in this study, polyvinylpyrrolidone (PVP)-coated magnetic nanoparticles (MNPs) were produced and characterized. To our knowledge, this is the first study to explore the feasibility of immobilizing a Trametes trogii laccase enzyme on Fe3O4/PVP MNPs. The characterization of samples and the successful immobilization of laccase were verified by characterization methods. Besides, the biochemical properties and stability of the Fe3O4/PVP/Lac were evaluated in terms of optimum pH, optimum temperature, thermostability, thermodynamic and kinetic parameters, storage stability, operational stability, and decolorization efficiency of two different textile dyes. The optimum activities were recorded at pH 2.5 °C and 30 °C. The Fe3O4/PVP/Lac displayed remarkable thermal stability and activation energy for denaturation, enthalpy, Gibbs free energy, and entropy results confirmed the enhanced stability of Fe3O4/PVP/Lac against high temperatures. Meanwhile, the Fe3O4/PVP/Lac retained about 58% of its original activity after seven consecutive reuses, while it retained up to 25% of its original activity after 28 d of storage at room temperature. Km and Vmax for the Fe3O4/PVP/Lac were calculated to be 126 µM and 211 µmol/min, respectively. Finally, after 8 and 6 cycles of repeated use, the Fe3O4/PVP/Lac still decolorized 32.34% and 32.23% of Remazol Brilliant Blue R (RBBR) and Indigo Carmine (IC), respectively. As envisioned, this study suggests a promising way to solve the problems of high price and poor operational stability of the enzyme during biocatalytic decolorization of textile dyes in wastewaters. [ABSTRACT FROM AUTHOR]

In this investigation, specimens of magnetic nanoparticles (MNPs) consisting of Fe2O3, Fe3O4, and CoFe2O4 were synthesized in a powdered state through the co-precipitation technique. X-ray diffraction was employed for the purpose of characterizing the dimensions of the sample, yielding the following measurements: t = 64, 10, and 13 nm, respectively. Subsequently, a series of suspensions (S1, S5, S10, S15, and S20) were prepared by introducing varying amounts (x = 1, 5, 10, 15, and 20 mg) of magnetic nanoparticles into 1 ml of distilled water. A low-frequency induction heater was employed to investigate the thermal characteristics of the aforementioned MNPs. The experimental findings indicate that as the concentration of MNPs in the suspension increases, there is a corresponding decrease in the maximum temperature (Tmax) measured in degrees Celsius, the heating rate (∆T/∆t) measured in degrees Celsius per second, and the specific absorption rate measured in watts per gram. Furthermore, the conducted investigation has elucidated that these MNPs exhibit commendable thermal characteristics, thereby signifying their potential utility in the realm of magnetic hyperthermia treatment. [ABSTRACT FROM AUTHOR]

The synthesis of magnetic nanoparticles enclosed in zeolitic imidazolate frameworks (MNPs@ZIF-8) was successful carried out at ambient temperature and atmospheric pressure. The synthesis procedure was selected because it is uncomplicated and does not call for the use of any sophisticated pieces of apparatus throughout its execution. The Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and transmission electron microscopy (TEM) images were investigated to characterize the materials. The analysis of the data allowed MNPs@ZIF-8 to evolve into a highly crystalline phase with particles ranging in size from 50 to 100 nanometers. This was made feasible by the fact that the phase could be created. It was explored whether or not MNPs@ZIF-8 was effective as a nanocarrier for the delivery of natural medicines like crocin. It was demonstrated to be very biocompatible and had an IC50 value of > 1000 μg/mL, which is the concentration at which half of the maximum inhibitory effect is produced. The IC50 value for crocin-loaded MNPs-ZIF-8 was 419 ± 0 μg/mL, which was roughly half of the IC50 value for pure crocin, which was 716 ± 160 μg/mL. [ABSTRACT FROM AUTHOR]

The heat transport that takes place in living tissue during magnetic tumor hyperthermia is described in this study using the nonlocal bioheat model in spherical coordinates. In magnetic fluid hyperthermia, it is crucial to regulate the therapeutic temperature. This paper suggests a hybrid numerical approach that employs the Laplace transforms, change of variables, and modified discretization techniques, coupled with nonlocal hyperbolic shape function, to tackle the present problem. This study investigates the impacts of nonlocal parameter and the disparity in thermophysical properties between diseased and healthy tissue. A graph is displayed to represent the numerical temperature results. The validity of the numerical findings is demonstrated by comparing them with the results reported in previous literature. [ABSTRACT FROM AUTHOR]

[Display omitted] The adsorption of proteins onto the surface of nanoparticle (NP) leads to the formation of the so-called "protein corona" as consisting both loosely and tightly bound proteins. It is well established that the biological identity of NPs that may be acquired after exposure to a biological matrix is mostly provided by the components of the hard corona as the pristine surface is generally less accessible for binding. For that reason, the isolation and the characterisation of the NP-corona complexes and identification of the associated biomolecules can help in understanding its biological behaviour. Established methods for the isolation of the NP-HC complexes are time-demanding and can lead to different results based on the isolation method applied. Herein, we have developed a fast and simple method using ferromagnetic beads isolated from commercial MACS column and used for the isolation of superparamagnetic NP following exposure to different types of biological milieu. We first demonstrated the ability to easily isolate superparamagnetic iron oxide NPs (IONPs) from different concentrations of human blood plasma, and also tested the method on the corona isolation using more complex biological matrices, such as culture medium containing pulmonary mucus where the ordinary corona methods cannot be applied. Our developed method showed less than 20% difference in plasma corona composition when compared with centrifugation. It also showed effective isolation of NP-HC complexes from mucus-containing culture media upon comparing with centrifugation and MACS columns, which failed to wash out the unbound proteins. Our study was supported with a full characterisation profile including dynamic light scattering, nanoparticle tracking analysis, analytical disk centrifuge, and zeta potentials. The biomolecules/ proteins composing the HC were separated by vertical gel electrophoresis and subsequently analysed by liquid chromatography-tandem mass spectrometry. In addition to our achievements in comparing different isolation methods to separate IONPs with corona from human plasma, this is the first study that provides a complete characterisation profile of particle protein corona after exposure in vitro to pulmonary mucus-containing culture media. [ABSTRACT FROM AUTHOR]

Objective(s): Colorectal cancer is the second deadly cancer for men and women worldwide. Depending on the pathological attributes of the tumor, there are numerous therapeutic options for colorectal cancer treatment. Chemotherapy is one of the main methods, however, due to the low solubility and short half-life of chemotherapy drugs, this treatment method has limitations. 5-Fu and curcumin are important drugs for the treatment of colorectal cancer. One of the primary resolutions is the application of bioanalytical techniques, which involve the utilization of chemotherapy agents in conjunction with nanoparticles, thereby facilitating the directed transportation of the therapeutic substance to malignant cells. Materials and Methods: In this study, Polycaprolactone-Polyethylene glycol-Hyaluronic acid (PCL-PEGHA) copolymers and magnetic nanoparticle iron-cobalt (FeCo) were synthesized to deliver Curcumin (CU), 5-Fluorouracil (5-Fu) and the combination to HCT116 colorectal cancer cells. To control the release of CU and 5-FU and in vivo tumor targeting, PCL-PEG-HA/FeCo were synthesized and then characterized for the morphological characteristics, shape, and magnetic properties of the nanoparticles, drug retention efficiency, and release pattern in two acidic and neutral environments. Results: Our results demonstrated that the release profile of CU and 5-FU from the nanoparticles in acidic conditions was more than the drug release in neutral conditions. In acidic conditions, due to faster degradation of nanoparticles, drugs are released faster. Moreover, these nanoparticles have high biocompatibility and potential in transporting CU and 5-FU drugs to HCT116 cells. The IC50 of co-delivery of CU and 5-FU was 65.42 mg/L, while, the IC50 value of drugs coated with nanoparticles (PCL-PEG-HA/FeCo/5-FU/Curcumin) was 72.26. Otherwise, utilizing nanoparticles can increase the amount of apoptosis compared to control and free 5-Fu and Curcumin. Conclusion: In conclusion, PCL-PEG-HA/FeCo/5-FU/Curcumin nanoparticles can be an efficient solution in targeted drug delivery to colorectal cancer cells and reducing the side effects of these drugs on normal cells. [ABSTRACT FROM AUTHOR]

Nanomaterials have demonstrated a wide range of applications and amongst nanomaterials, most of the research has mainly focused on nanoparticles as they can be easily prepared and manipulated. The magnetic properties of certain magnetic nanoparticles have attracted a lot of interest in environmental applications. However, because of their great vulnerability to chemical and physical activity, their magnetic characteristics deteriorate. These nanoparticles are being progressively attempted to be encapsulated by a green organic matrix, which greatly improves usefulness, stability, and affordability, and reduces back toxicity. In this investigation, iron oxide (IO) nanoparticles were prepared by a co-precipitation method and these bear IO particles were stabilized by green synthesized silver nanoparticles to produce IO/Ag nanocomposite particles. The nano size of the prepared particles was confirmed by FE-SEM and TEM analysis. Incorporation of silver nanoparticles (AgNPs) on IO particles was confirmed by UV-Vis, XRD, TGA, and VSM. The improved stability of the magnetic particles was confirmed by DLS and zeta potential. Using the reducing agent NaBH4, the catalytic reduction ability of the IO/Ag nanocomposite particles is investigated in relation to the degradation of Congo Red, a model anionic azo dye. When 40 μg mL−1 of IO/Ag particles were used, complete degradation of 20 mL of CR (0.1 mM) dye solution was accomplished in 2 minutes. The particles also demonstrated moderate antibacterial activity against four pathogens and good DPPH free radical scavenging activity, with 94% scavenging recorded at a concentration of 100 μg mL−1 particles. [ABSTRACT FROM AUTHOR]

Iron oxide dust, discarded as industrial waste, has been used here to fabricate magnetic iron oxide nanoparticles (Fe3O4-NPs). We have proposed the thermo-catalytic reduction of carbon dioxide (CO2) using Fe3O4-NPs in the presence of H2O2 to get acetic acid (AcOH) at near ambient conditions (100 °C, 10 bar) with a maximum yield of ∼0.4 M in a batch-reactor. The importance of H2O2 can be described as it facilitates the production of higher concentrations of OH˙ and H+/˙, which consequently supports the synthesis of AcOH. [ABSTRACT FROM AUTHOR]

An exciting prospect in the field of magnetic fluid hyperthermia (MFH) has been the integration of noble rare earth elements with biopolymers (chitosan/dextran) that have optimum structures to tune specific effects on magnetic nanoparticles (MNPs). Remarkably, it has been demonstrated that dipole–dipole interactions have a significant influence on nanoparticle dynamics. In this article, we present an exhaustive scrutiny of dipolar interactions and how this affects the efficiency of MFH applications. In particular, we prepare chitosan and dextran-coated Tb-doped MNPs and study whether it is possible to increase the heat released by controlling the dipole–dipole interactions. It has been indicated that even moderate control of agglomeration may substantially impact the structure and magnetization dynamics of the system. Besides estimating the specific loss power value, our findings provide a deep insight into the relaxation mechanisms and bring to light how to tune the self-heating efficacy towards magnetic hyperthermia. [ABSTRACT FROM AUTHOR]

Background: The delivery of therapeutic nucleic acids, such as small interfering RNA (siRNA) and antisense oligonucleotides (ASO) into cells, is widely used in gene therapy. Gold nanoparticles (AuNPs) have proved to be effective in delivering silencing moieties with high efficacy. Moreover, AuNPs offer the possibility of spatial–temporal triggering of cell uptake through light irradiation due to their unique optical properties. Our study focuses on the use of AuNPs as improved vectorisation agents through mild photothermy triggered by visible light irradiation. This method promotes the transfection of oligonucleotides for gene silencing in 2D cells and more complex 3D spheroids. Results: Improving gene silencing strategies in 3D cell cultures is crucial since it provides more effective in vitro models to study cellular responses that closely resemble the in vivo tumour microenvironment. We demonstrate the potential of mild photothermy by effectively silencing the GFP gene in 2D cell cultures: HCT116 and MCF-7. Then we showed that mild photothermy could be effectively used for silencing the c-MYC oncogene transcript, which is greatly overexpressed in cancer cells. A decrease of 25% and 30% in c-MYC expression was observed in HCT116 2D cells and 7-day 3D spheroids, respectively. Conclusions: In summary, our findings offer a novel transfection approach for gene therapy applications in 2D and 3D tumour models. This approach is based on the use of mild photothermy mediated by AuNPs combined with visible laser irradiation that might pave the way for the spatial–temporal control of gene modulation. [ABSTRACT FROM AUTHOR]

In this study, Mg1-xCoxFe2O4 (0

In magnetic nanoparticle hyperthermia, the magnetic nanoparticles (MNPs) start oscillations when they are exposed to an alternating magnetic field, which may generate ultrasound waves. These resulting oscillations of nanoparticles can lead to the movement of drug carrier liposomes. In this study, a multiphysics coupling model of magnetic nanoparticle behavior in an alternating magnetic field was developed, implementing solid mechanics compliance parameters and piezomagnetic coupling matrices. A detailed sensitivity study was conducted to examine the effects of size and elastic modulus of MNPs, distribution and distance between two MNPs, elasticity and viscosity of the glycerol medium and mesh element sizes on the output displacement signals of MNPs. The results indicated that magnetic nanoparticles undergo some displacements when they are exposed to an alternating magnetic field. These oscillations may generate ultrasound waves, though the amount of displacement for each nanoparticle is negligibly small. It is expected that aggregated nanoparticles result in much higher oscillations. [ABSTRACT FROM AUTHOR]

Hyaluronic acid (HA) has attracted much attention in tumor-targeted drug delivery due to its ability to specifically bind to the CD44 cellular receptor, which is widely expressed on cancer cells. We present HA-capped magnetic nanoparticles (HA-MNPs) obtained via the co-precipitation method, followed by the electrostatic adsorption of HA onto the nanoparticles' surfaces. A theoretical study carried out with the PM3 method evidenced a dipole moment of 3.34 D and negatively charged atom groups able to participate in interactions with nanoparticle surface cations and surrounding water molecules. The ATR-FTIR spectrum evidenced the hyaluronic acid binding to the surface of the ferrophase, ensuring colloidal stability in the water dispersion. To verify the success of the synthesis and stabilization, HA-MNPs were also characterized using other investigation techniques: TEM, EDS, XRD, DSC, TG, NTA, and VSM. The results showed that the HA-MNPs had a mean physical size of 9.05 nm (TEM investigation), a crystallite dimension of about 8.35 nm (XRD investigation), and a magnetic core diameter of about 8.31 nm (VSM investigation). The HA-MNPs exhibited superparamagnetic behavior, with the magnetization curve showing saturation at a high magnetic field and a very small coercive field, corresponding to the net dominance of single-domain magnetic nanoparticles that were not aggregated with reversible magnetizability. These features satisfy the requirement for magnetic nanoparticles with a small size and good dispersibility for long-term stability. We performed some preliminary tests regarding the nanotoxicity in the environment, and some chromosomal aberrations were found to be induced in corn root meristems, especially in the anaphase and metaphase of mitotic cells. Due to their properties, HA-MNPs also seem to be suitable for use in the biomedical field. [ABSTRACT FROM AUTHOR]

The modern global trend toward sustainable processes that meet the requirements of "green chemistry" provides new opportunities for the broad application of highly active, selective, and specific enzymatic reactions. However, the effective application of enzymes in industrial processes requires the development of systems for the remote regulation of their activity triggered by external physical stimuli, one of which is a low-frequency magnetic field (LFMF). Magnetic nanoparticles (MNPs) transform the energy of an LFMF into mechanical forces and deformations applied to enzyme molecules on the surfaces of MNPs. Here, we demonstrate the up- and down-regulation of two biotechnologically important enzymes, yeast alcohol dehydrogenase (YADH) and soybean formate dehydrogenase (FDH), in aggregates with gold-covered magnetic nanoparticles (GCMNPs) triggered by an LFMF. Two types of aggregates, "dimeric" (with the enzyme attached to several GCMNPs simultaneously), with YADH or FDH, and "monomeric" (the enzyme attached to only one GCMNP), with FDH, were synthesized. Depending on the aggregate type ("dimeric" or "monomeric"), LFMF treatment led to a decrease (down-regulation) or an increase (up-regulation) in enzyme activity. For "dimeric" aggregates, we observed 67 ± 9% and 47 ± 7% decreases in enzyme activity under LFMF exposure for YADH and FDH, respectively. Moreover, in the case of YADH, varying the enzyme or the cross-linking agent concentration led to different magnitudes of the LFMF effect, which was more significant at lower enzyme and higher cross-linking agent concentrations. Different responses to LFMF exposure depending on cofactor presence were also demonstrated. This effect might result from a varying cofactor binding efficiency to enzymes. For the "monomeric" aggregates with FDH, the LFMF treatment caused a significant increase in enzyme activity; the magnitude of this effect depended on the cofactor type: we observed up to 40% enzyme up-regulation in the case of NADP+, while almost no effect was observed in the case of NAD+. [ABSTRACT FROM AUTHOR]

In this work, a series of PEGylated manganese-zinc ferrite mixed (PEG-Mn1-xZnxFe2O4) nanoparticles with varying concentrations of zinc ions (x = 0.0, 0.25, 0.4, 0.5, 0.75, 1.0) were synthesized using a solvothermal approach to investigate their physicochemical and magnetic hyperthermia properties through a range of analytical techniques, including TEM, XRF, XRD, FTIR, VSM, and magnetic hyperthermia. The PEG-Mn1-xZnxFe2O4 nanoparticles exhibited a nearly spherical shape and diameters less than 30 nm. The particle size decreased from 27 to 11.6 nm with an increasing amount of zinc (x = 0.0–0.5). The saturation magnetization (MS) value decreased with the rising Zn content, ranging from 77.8 to 30.7 emu/g. The addition of zinc led to a reduction in the specific absorption rate (SAR) of the material. This decrease in the SAR parameter was associated with a decline in the intrinsic loss power (ILP) value, varying from 0.264 nH m2/kg for MnFe2O4 to 0.037 nH m2/kg for ZnFe2O4. Consequently, these PEG-Mn1-xZnxFe2O4 nanoparticles exhibit potential as candidates for magnetic fluid hyperthermia applications. [ABSTRACT FROM AUTHOR]

It has been observed that polyvalent metal ions can mediate the adsorption of DNA on polydopamine (PDA) surfaces. Exploiting this, we used two divalent metal ions (Mg2+ or Ca2+) to promote the adsorption of fluorescence-labelled ochratoxin A (OTA) aptamers on PDA-coated magnetic nanoparticles (Fe3O4@PDA). Based on the different adsorption affinities of free aptamers and OTA-bound aptamers, a facile assay method was established for OTA detection. The aptamers adsorbed on Fe3O4@PDA were removed via simple magnetic separation, and the remaining aptamers in the supernatant exhibited a positive correlation with the OTA concentration. The concentrations of Mg2+ and Ca2+ were finely tuned to attain the optimal adsorption affinity and sensitivity for OTA detection. In addition, other factors, including the Fe3O4@PDA dosage, pH, mixing order, and incubation time, were studied. Finally, under optimized conditions, a detection limit (3σ/s) of 1.26 ng/mL was achieved for OTA. Real samples of spiked red wine were analysed with this aptamer-based method. This is the first report of regulating aptamer adsorption on the PDA surface with polyvalent metal ions for OTA detection. By changing the aptamers, the method can be easily extended to other target analytes. [ABSTRACT FROM AUTHOR]

This study explored the effectiveness of nasal administration in delivering magnetic nanoparticles into the brain for magnetic particle imaging of target regions. Successful delivery of iron oxide nanoparticles, which serve as contrast agents, to specific sites within the brain is crucial for achieving magnetic particle imaging. Nasal administration has gained attention as a method to bypass the blood-brain barrier and directly deliver therapeutics to the brain. In this study, we investigated surface modification techniques for administering magnetic nanoparticles into the nasal cavity, and provided experimental validation through in vivo studies. By compositing magnetic nanoparticles with gold nanoparticles, we enabled additional surface modification via Au S bonds without compromising their magnetic properties. The migration of the designed PEGylated magnetic nanoparticles into the brain following nasal administration was confirmed by magnetization measurements. Furthermore, we demonstrated the accumulation of these nanoparticles at specific target sites using probe molecules immobilized on the PEG terminus. Thus, the efficacy of delivering magnetic nanoparticles to the brain via nasal administration was demonstrated in this study. The findings of this research are expected to contribute significantly to the realization of magnetic particle imaging of target regions within the brain. This study investigates efficient brain delivery of magnetic nanoparticles through nasal administration for magnetic particle imaging. Successful delivery to specific brain sites was confirmed, showing potential for improved imaging in target brain regions. [Display omitted] [ABSTRACT FROM AUTHOR]

The use of magnetic nanothermometry faces challenges in noninvasive thermal monitoring during hyperthermia therapy due to the impact of the biological protein corona. Herein, we present an advanced magnetic nanothermometry model that incorporates the linear and cubic susceptibility phases, ensures robustness against hydrodynamic variations, maintains concentration independence, and can adapt to diverse magnetic field intensities. In this work, we studied five types of particles with comparable core structures (single- and multi-core) and chemical compositions (carboxyl and plain) before and after incubation with bovine serum albumin. Temperature-measurement experiments were conducted spanning both room temperature and a physiological temperature range of 10 K. The results highlight the model's effectiveness, especially for single-core particles exhibiting Brownian relaxation behavior, with temperature errors controlled to within ±0.4 K. The model's predictions remained consistent irrespective of particle chemical compositions, while detecting hydrodynamic diameter changes post-incubation, indirectly highlighting protein–corona interactions. These findings enhance the application potential of magnetic nanothermometry in hyperthermia therapy, contributing to preclinical validations and insights into nanoparticle–biological interactions. [ABSTRACT FROM AUTHOR]

Magnetic nanomaterials have played a crucial role in promoting the application of nanotechnology in the biomedical field. Although conventional magnetic nanomaterials such as iron oxide nanoparticles (NPs) are used as biosensors, drug delivery vehicles, diagnostic and treatment agents for several diseases, the persistent pursuit of high‐performance technologies has prompted researchers to continuously develop new types of magnetic nanomaterials such as iron carbide NPs. Considering their potential application in biomedicine, magnetic NPs responsive to exogenous or endogenous stimuli are developed, thereby enhancing their applicability in more complex versatile scenarios. In this review, the synthesis and surface modification of magnetic NPs are focused, particularly iron carbide NPs. Subsequently, exogenous and endogenous stimuli‐responsive magnetic NP‐based theranostic platforms are introduced, particularly focusing on nanozyme‐based technologies and magnetic NP‐mediated immunotherapy, which are emerging stimuli‐responsive treatments. Finally, the challenges and perspectives of magnetic NPs to accelerate future research in this field are discussed. [ABSTRACT FROM AUTHOR]

Circulating tumor cells (CTCs) are a crucial biomarker for early cancer diagnosis and progress of cancer metastasis. However, the extremely rare CTCs with large amounts of background leukocytes seriously restricte the purity of enriched CTCs. Herein, genetically engineered cell membrane‐coated magnetic nanoparticles with following properties are constructed: I) The leukocyte membrane camouflaged nanoparticles, which could significantly reduce nonspecific binding of homologous leukocytes and achieve high‐purity isolation of CTCs, are prepared by simple one‐step extrusion and II) the cellular membrane stably expressing single‐chain variable fragment (scFv) of anti‐epidermal growth factor receptor (EGFR) antibody could ensure the recognition of EGFR‐positive CTCs. The binding affinity of the resulting nanoparticles toward extracellular EGFR protein improved more than 100‐fold compared with natural cell membrane‐coated nanoparticles. Furthermore, compared with commercial immunomagnetic nanoparticles, the functional nanoparticles achieved a greater capture efficiency in artificial blood samples and the cell purity increased from 64.8% to 93.5%. Consequently, the authors successfully isolate high pure CTCs from 6 out of 6 cancer patients using engineered cell membrane‐coated nanoparticles. This platform exhibits a promising potential for CTC detection in clinical samples, offering an innovative method for cancer diagnosis and prognosis evaluation. [ABSTRACT FROM AUTHOR]

Silica-coated magnetic-luminescent nanocomposites, obtained from Mn0.8Fe2.2O4 and near-white emitting GdVO4:Dy3+, reported in this work for possible application in combined imaging and magnetic fluid hyperthermia. Folic acid functionalization of the nanocomposite was further achieved for enhanced tumor affinity since folate receptors are overexpressed in cancer tissues. The nanocomposite showed the cubic-tetragonal biphasic structure corresponding to the cubic Fe3O4 and tetragonal GdVO4 phases. The compositions and surface modifications were confirmed by infrared spectroscopy. The formation of agglomerated nanoparticle was observed from the transmission electron microscopy comprising of particles in the 20-nm size range. Brilliant near white emission can be seen from the nanocomposites upon excitation at 287 nm. The induction heating analysis was performed at the alternating magnetic field strengths of 2.15 × 106 kAm−1 s−1, 3.05 × 106 kAm−1 s−1, and 4.58 × 106 kAm−1 s−1. The MTT assay revealed that the nanocomposite exhibits 50% cell viability towards MDA-231 breast cancer cell line. Thus, these magnetic-luminescent nanocomposites will have potential applications for magnetic fluid hyperthermia and optical imaging. [ABSTRACT FROM AUTHOR]

Metal nanoparticles play a crucial role in the medical industry due to its desirable properties such as antimicrobial activity, anti‐cancer property, and its application in disease diagnostics. These properties enable the nanoparticles to be used as efficient medical devices for various treatments as well as drug delivery systems. Despite all the positives, metal nanoparticles are known for causing toxicity in the living system. The toxicological effects of metal nanoparticles are due to their size, surface*e coating, and the dose administered. Therefore, it is important to study the toxic effects of these nanoparticles before they are used as medical devices for various treatments. This review focuses on the five major metal nanoparticles used in the medical field, namely; silver, gold, iron oxide, zinc oxide, and titanium dioxide nanoparticles. The non‐exhaustive review consists of an introduction to the toxicological effects of these nanoparticles, the biocompatibility, and the current and future clinical perspective on metal nanoparticles. [ABSTRACT FROM AUTHOR]

In this study, a novel nanocarrier based on magnetic nanoparticles was synthesized via a facile method and modified by alginate. The synthesized nanocarrier was characterized using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, Brunauer–Emmett–Teller, vibrating sample magnetometer, and x-ray diffraction analysis. Different factors were optimized to evaluate the adsorption of imatinib on the nanoadsorbent. Imatinib was chosen as an anti-cancer drug, and the release rate of imatinib was investigated in simulated human blood (pH = 7.4) and simulated cancer (pH = 5.6) fluids. The drug adsorption isotherms, kinetics, and thermodynamics were studied. Based on the equilibrium adsorption results, the Langmuir isotherm and the pseudo-second-order kinetic models indicated a better fit than other models. Values of the enthalpy and entropy for drug sorption on the nanoadsorbent were positive. The negative value of Gibbs free energy reveals the spontaneous and feasible adsorption of imatinib on the nanoadsorbent. [ABSTRACT FROM AUTHOR]

We present FexOy composite particles prepared by pulsed laser irradiation of α-Fe2O3 nanoparticles dispersed in ethyl acetate and irradiated using a laser beam in the ultraviolet range with a wavelength of 355 nm. The sizes of particles and composition were controlled by tuning the laser parameters, such as laser fluence and irradiation time. We showed the evolution of the composition through X-ray diffraction measurements. Reactive bond molecular dynamics simulation results show bond breaking/formation during the synthesizing process. We examined the magnetic properties of the particles and showed that coercivity can be changed by the composition of particles and by increasing or decreasing particle size. The choice of systems built of iron and iron oxides made it possible to introduce the exchange bias effect into a range of magnetic properties of synthesized particles. [ABSTRACT FROM AUTHOR]

We present a novel method for estimating the magnetic field that can generate the desired magnetic force to move magnetic nanoparticles in a region of interest. The magnetic field is expanded using vector spherical harmonics, and the optimal multipole moments are estimated. The multipole moments are included in quadratic form because the magnetic force is defined as the product of the magnetic field and its gradient. We transform the system of quadratic equations into a rank-one-matrix estimation problem to construct a convex numerical algorithm based on a well-established proximal operation. The proposed method was validated using numerical simulations and can be used to design magnetic force patterns that cannot be generated using a simple coil pair. [ABSTRACT FROM AUTHOR]

[Display omitted] Macrophages are known to depict two major phenotypes: classically activated macrophages (M1), associated with high production of pro-inflammatory cytokines, and alternatively activated macrophages (M2), which present an anti-inflammatory function. A precise control over M1-M2 polarization is a promising strategy in therapeutics to modulate both tissue regeneration and tumor progression processes. However, this is not a simple task as macrophages behave differently depending on the microenvironment. In agreement with this, non-consistent data have been reported regarding macrophages response to magnetic iron oxide nanoparticles (MNPs). To investigate the impact of both tissue microenvironment and MNPs properties on the obtained macrophage responses, single-core (SC) and multi-core (MC) citrate coated MNPs, are synthesized and, afterwards, loaded with a macrophage polarization trigger, IL-4. The developed MNPs are then tested in macrophages subjected to different stimuli. We demonstrate that macrophages treated with low concentrations of MNPs behave differently depending on the polarization stage independently of the concentration of iron. Moreover, we find out that MNPs size and morphology determines the effect of the IL-4 loaded MNPs on M1 macrophages, since IL-4 loaded SC MNPs favor the polarization of M1 macrophages towards M2 phenotype, while IL-4 loaded MC MNPs further stimulate the secretion of pro-inflammatory cytokines. [ABSTRACT FROM AUTHOR]

Simple Summary: This study examines the application of magnetic nanoparticle hyperthermia (MNH), a cancer treatment technique that utilizes magnetic particles at the scale of nanometers and a controlled magnetic field to selectively heat and destroy cancer cells. The study focuses on a specific system, the Sarah Nanotechnology System, which combines these magnetic particles and a device that generates the magnetic field. The main goal is to ensure this treatment is safe for patients. We used a combination of real-world experiments and computer simulations to test how the system affects the body's temperature, particularly aiming to avoid overheating healthy tissues. We used a virtual human model to predict temperature changes during treatment. The findings are promising for safely using this advanced technology in cancer treatment, potentially offering a new, targeted approach for patients with advanced-stage tumors. This could be a significant step forward in cancer therapy, highlighting the importance of combining experimental and computational methods in medical research. The present study focuses on the development of a methodology for evaluating the safety of MNH systems, through the numerical prediction of the induced temperature rise in superficial skin layers due to eddy currents heating under an alternating magnetic field (AMF). The methodology is supported and validated through experimental measurements of the AMF's distribution, as well as temperature data from the torsos of six patients who participated in a clinical trial study. The simulations involved a computational model of the actual coil, a computational model of the cooling system used for the cooling of the patients during treatment, and a detailed human anatomical model from the Virtual Population family. The numerical predictions exhibit strong agreement with the experimental measurements, and the deviations are below the estimated combined uncertainties, confirming the accuracy of computational modeling. This study highlights the crucial role of simulations for translational medicine and paves the way for personalized treatment planning. [ABSTRACT FROM AUTHOR]

Fe3O4 magnetic nanoparticles (MNPs) have attracted tremendous attention due to their superparamagnetic properties, large specific surface area, high biocompatibility, non–toxicity, large–scale production, and recyclability. More importantly, numerous hydroxyl groups (–OH) on the surface of Fe3O4 MNPs can provide coupling sites for various modifiers, forming versatile nanocomposites for applications in the energy, biomedicine, and environmental fields. With the development of science and technology, the potential of nanotechnology in the food industry has also gradually become prominent. However, the application of composite Fe3O4 MNPs in the food industry has not been systematically summarized. Herein, this article reviews composite Fe3O4 MNPs, including their properties, modifications, and physical functions, as well as their applications in the entire food industry from production to processing, storage, and detection. This review lays a solid foundation for promoting food innovation and improving food quality and safety. [ABSTRACT FROM AUTHOR]

In this paper, we present the results of a study of the properties of silver and copper nanoparticle (NP) ensembles and Fe3O4:Gd:B composites, which are promising for their potential uses in biomedicine. Magnetic resonance is applied as the main method of analysis. The magnetic properties of the NPs are found to be highly sensitive to the nanoparticle size, which enables finding the size distributions of metal NPs, using magnetic measurements. The dependence of the magnetic properties of lyophilized ensembles of Ag and Cu NPs on the interaction with molecular oxygen is revealed. The composites magnetic system Fe3O4:Gd:B is a key component of a promising method for neutron-capture therapy. The magnetic properties of this system, which are the result of differences in the g-factors of its components, are described in detail. As a consequence, the dependence of the resulting g-factor on the ratio of the components is established. [ABSTRACT FROM AUTHOR]