Search

ABSTRACT This study demonstrates a hydrolysis‐free approach for characterizing acetalated dextran derivatives using Raman spectroscopy combined with two‐dimensional correlation spectroscopy (2D‐COS). Traditional methods like 1H‐NMR spectroscopy rely on hydrolysis and are constrained by the time‐sensitive detection of volatile acetone. Raman spectroscopy, as a non‐destructive technique, was applied to analyze time‐dependent acetalation of methoxy and ethoxy acetalated dextran derivatives (AcDex and AceDex). By employing 2D‐COS, time‐resolved Raman spectral changes revealed key marker bands associated with kinetic (acyclic) and thermodynamic (cyclic) substitution products. The observed Raman peak ratios corresponded well with those derived from 1H‐NMR spectroscopy, confirming the accuracy of the method. This approach not only eliminates the need for hydrolysis but also provides a robust, time‐independent tool for tracking acetalation, enabling precise control over polymer properties. The findings underscore the potential for Raman spectroscopy in real‐time monitoring and optimization of dextran‐based polymer synthesis. [ABSTRACT FROM AUTHOR]

Background: Resveratrol (RSV) is a natural polyphenol that offers antioxidant, anti-inflammatory, and chemopreventive benefits. This project determined the ability of RSV-loaded nanoparticles (NP) to inhibit the growth of lung tumor spheroids in vitro. Methods: RSV was encapsulated in NP comprised of the biodegradable polymer, acetalated dextran. A549 lung cancer cells in two-dimensional and three-dimensional cell culture models were exposed to free RSV and RSV NP to evaluate their effect on cell proliferation and spheroid formation and growth. For prevention studies, spheroids were exposed to free RSV and RSV NP on day 0, and for treatment studies, spheroids were dosed with the same formulations on day 5 after the spheroids had fully formed. Results: The resulting RSV NP were 200 nm in diameter with neutral surface charge and exhibited the ability to control the release of RSV in vitro based on environmental pH. In comparison to free RSV, the RSV NP exerted a greater inhibitory effect on the proliferation and growth of cancer cells and spheroids. Conclusions: RSV NP have the potential to be used as a chemopreventive agent for lung cancer. [ABSTRACT FROM AUTHOR]

Influenza outbreaks are a major burden worldwide annually. While seasonal vaccines do provide protection against infection, they are limited in that they need to be updated every year to account for the constantly mutating virus. Recently, lipid nanoparticles (LNPs) encapsulating mRNA have seen major success as a vaccine platform for SARS-CoV-2. Herein, we applied LNPs to deliver an mRNA encoding a computationally optimized broadly active (COBRA) influenza immunogen. These COBRA mRNA LNPs induced a broadly active neutralizing antibody response and protection after lethal influenza challenge. To further increase the immunogenicity of the COBRA mRNA LNPs, we combined them with acetalated dextran microparticles encapsulating a STING agonist. Contrary to recent findings, the STING agonist decreased the immunogenicity of the COBRA mRNA LNPs which was likely due to a decrease in mRNA translation as shown in vitro. Overall, this work aids in future selection of adjuvants to use with mRNA LNP vaccines. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract Macrophage targeting and researches centered on immunological responses have received interest thanks to studies unveiling the significant role of macrophages in inflammatory diseases and cancer. In this regard, we have selected four types of nanoparticles (NPs), including acetalated dextran‐based nano‐carrier functionalized with atrial natriuretic peptide and linTT1(AcDEX‐PEG‐TT1‐ANP), PEGylated acetalated dextran (AcDEX‐PEG), acetalated dextran (AcDEX), and hyaluronic acid (HA) to investigate their interactions with macrophage membrane. Using microsecond coarse‐grained molecular dynamics (MD) simulations, we studied the interactions between the NPs and the macrophage membrane and subsequent immunological reactions that occur after the penetration of the NPs within the macrophage cell. Different parameters that determine the strength and amount of macrophage membrane interaction were measured and compared for all four types of NPs. The results showed that AcDEX‐PEG‐TT1‐ANP has the most favorable interaction with the macrophage membrane while HA has the least favorable results by comparison. Moreover, drug encapsulation and release in different pH conditions showed the pH‐responsivity of the considered NPs for drug delivery in acidic environments. On the other hand, evaluations with human serum albumin (HSA), fibrinogen (Fib), and transferrin (Tf) declared that peptide modified AcDEX polymers are the most probable NPs to absorb a layer of the protein corona.

Multiple sclerosis (MS) is a severe autoimmune disorder that wreaks havoc on the central nervous system, leading to a spectrum of motor and cognitive impairments. There is no cure, and current treatment strategies rely on broad immunosuppression, leaving patients vulnerable to infections. To address this problem, our approach aims to induce antigen-specific tolerance, a much-needed shift in MS therapy. We have engineered a tolerogenic therapy consisting of spray-dried particles made of a degradable biopolymer, acetalated dextran, and loaded with an antigenic peptide and tolerizing drug, rapamycin (Rapa). After initial characterization and optimization, particles were tested in a myelin oligodendrocyte glycoprotein (MOG)-induced experimental autoimmune encephalomyelitis model of MS. Representing the earliest possible time of diagnosis, mice were treated at symptom onset in an early therapeutic model, where particles containing MOG and particles containing Rapa+MOG evoked significant reductions in clinical score. Particles were then applied to a highly clinically relevant late therapeutic model during peak disease, where MOG particles and Rapa+MOG particles each elicited a dramatic therapeutic effect, reversing hind limb paralysis and restoring fully functional limbs. To confirm the antigen specificity of our therapy, we immunized mice against the influenza antigen hemagglutinin (HA) and treated them with MOG particles or Rapa+MOG particles. The particles did not suppress antibody responses against HA. Our findings underscore the potential of this particle-based therapy to reverse autoimmunity in disease-relevant models without compromising immune competence, setting it apart from existing treatments.

Effective drug delivery requires ample dosing at the target tissue while minimizing negative side effects. Drug delivery vehicles such as polymeric nanoparticles (NPs) are often employed to accomplish this challenge. In this work, drug release of numerous drugs from surface eroding polymeric NPs was evaluated in vitro in physiologically relevant pH 5 and neutral buffers. NPs were loaded with paclitaxel, rapamycin, resiquimod, or doxorubicin and made from an FDA approved polyanhydride or from acetalated dextran (Ace-DEX), which has tunable degradation rates based on cyclic acetal coverage (CAC). By varying encapsulate, pH condition, and polymer, a range of distinct drug release profiles were achieved. To model the obtained drug release curves, a mechanistic mathematical model was constructed based on drug diffusion and polymer degradation. The resulting diffusion-erosion model accurately described drug release from the variety of surface eroding NPs. For drug release from varied CAC Ace-DEX NPs, the goodness of fit of the developed diffusion-erosion model was compared to several conventional drug release models. The diffusion-erosion model maintained optimal fit compared to conventional models across a range of conditions. Machine learning was then employed to estimate effective diffusion coefficients for the diffusion-erosion model, resulting in accurate prediction of in vitro release of dexamethasone and 3′3'-cyclic guanosine monophosphate–adenosine monophosphate from Ace-DEX NPs. This predictive modeling has potential to aid in the design of future Ace-DEX formulations where optimized drug release kinetics can lead to a desired therapeutic effect. [Display omitted] [ABSTRACT FROM AUTHOR]

Macrophage targeting and researches centered on immunological responses have received interest thanks to studies unveiling the significant role of macrophages in inflammatory diseases and cancer. In this regard, we have selected four types of nanoparticles (NPs), including acetalated dextran‐based nano‐carrier functionalized with atrial natriuretic peptide and linTT1(AcDEX‐PEG‐TT1‐ANP), PEGylated acetalated dextran (AcDEX‐PEG), acetalated dextran (AcDEX), and hyaluronic acid (HA) to investigate their interactions with macrophage membrane. Using microsecond coarse‐grained molecular dynamics (MD) simulations, we studied the interactions between the NPs and the macrophage membrane and subsequent immunological reactions that occur after the penetration of the NPs within the macrophage cell. Different parameters that determine the strength and amount of macrophage membrane interaction were measured and compared for all four types of NPs. The results showed that AcDEX‐PEG‐TT1‐ANP has the most favorable interaction with the macrophage membrane while HA has the least favorable results by comparison. Moreover, drug encapsulation and release in different pH conditions showed the pH‐responsivity of the considered NPs for drug delivery in acidic environments. On the other hand, evaluations with human serum albumin (HSA), fibrinogen (Fib), and transferrin (Tf) declared that peptide modified AcDEX polymers are the most probable NPs to absorb a layer of the protein corona. [ABSTRACT FROM AUTHOR]

Abstract Background Dual inhibitors of the 5-lipoxygenase-activating protein (FLAP) and the microsomal prostaglandin E2 synthase-1 (mPGES-1) may exert better anti-inflammatory efficacy and lower risks of adverse effects versus non-steroidal anti-inflammatory drugs. Despite these advantages, many dual FLAP/mPGES-1 inhibitors are acidic lipophilic molecules with low solubility and strong tendency for plasma protein binding that limit their bioavailability and bioactivity. Here, we present the encapsulation of the dual FLAP/mPGES-1 inhibitor BRP-187 into the biocompatible polymers acetalated dextran (Acdex) and poly(lactic-co-glycolic acid) (PLGA) via nanoprecipitation. Results The nanoparticles containing BRP-187 were prepared by the nanoprecipitation method and analyzed by dynamic light scattering regarding their hydrodynamic diameter, by scanning electron microscopy for morphology properties, and by UV–VIS spectroscopy for determination of the encapsulation efficiency of the drug. Moreover, we designed fluorescent BRP-187 particles, which showed high cellular uptake by leukocytes, as analyzed by flow cytometry. Finally, BRP-187 nanoparticles were tested in human polymorphonuclear leukocytes and macrophages to determine drug uptake, cytotoxicity, and efficiency to inhibit FLAP and mPGES-1. Conclusion Our results demonstrate that encapsulation of BRP-187 into Acdex and PLGA is feasible, and both PLGA- and Acdex-based particles loaded with BRP-187 are more efficient in suppressing 5-lipoxygenase product formation and prostaglandin E2 biosynthesis in intact cells as compared to the free compound, particularly after prolonged preincubation periods.

Wei Liu,1,* Peng Quan,2,* Qingqing Li,1,* Pengyu Tang,1 Jian Chen,1 Tao Jiang,3 Weihua Cai1 1Department of Orthopaedics, The First Affiliated Hospital of Nanjing Medical University, Nanjing, Jiangsu 210029, China; 2Department of Pharmaceutical Science, School of Pharmacy, Shenyang Pharmaceutical University, Shenyang, China; 3Department of Orthopaedics, Wuxi People’s Hospital Affiliated to Nanjing Medical University, Wuxi, Jiangsu 214023, China *These authors contributed equally to this work Introduction: After traumatic spinal cord injury (SCI), an inhibitory environment that contains chondroitin sulfate proteoglycans (CSPGs) is formed that prevents axonal regeneration and growth.Materials and methods: As previously reported, local administration of Taxol® at a low concentration has shown promising abilities to promote axonal regeneration and downregulate inhibitory molecules after acute SCI. However, the application of an invasive miniosmotic pump to deliver Taxol and the Cremophor-related toxicity caused by Taxol limits the administration of Taxol.Results: In this study, the sustained release of paclitaxel (PTX) for 7 days was achieved by incorporating PTX into acetalated dextran (Ac-DEX) nanoparticles, and the prepared PTX-loaded Ac-DEX (PTX@Ac-DEX) nanoparticles promoted neurite extension in the presence of CSPGs. In a rat SCI model, both PTX@Ac-DEX and Taxol enhanced neural regeneration, inhibited CSPGs, protected the injured spinal cord, and improved locomotor recovery. Because of the sustained release of PTX, single administration of PTX@Ac-DEX showed equal therapeutic effect with Taxol, which need to be administered for seven days using a surgically implanted miniosmotic pump.Conclusion: Overall, this study provides an effective and convenient strategy for SCI therapy, which can improve neurite extension across an inhibitory environment and avoid Cremophor-related toxicity caused by Taxol. Keywords: acetalated dextran, nanoparticle, paclitaxel, spinal cord injury

Colorectal cancer (CRC) is the third most common and the second deadliest type of cancer worldwide, urging the development of more comprehensive models and of more efficient treatments. Although the combination of nanotechnology with chemo- and immuno-therapy has represented a promising treatment approach, its translation to the clinic has been hampered by the absence of cellular models that can provide reliable and predictive knowledge about the in vivo efficiency of the formulation. Herein, a 3D model based on CRC multicellular tumor spheroids (MCTS) model was developed by combining epithelial colon cancer cells (HCT116), human intestinal fibroblasts and monocytes. The developed MCTS 3D model mimicked several tumor features with cells undergoing spatial organization and producing extracellular matrix, forming a mass of tissue with a necrotic core. Furthermore, monocytes were differentiated into macrophages with an anti-inflammatory, pro-tumor M2-like phenotype. For a combined chemoimmunotherapy effect, spermine-modified acetalated dextran nanoparticles (NPs) loaded with the chemotherapeutic Nutlin-3a (Nut3a) and granulocyte-macrophage colony-stimulating factor (GM-CSF) were produced and tested in 2D cultures and in the MCTS 3D model. NPs were successfully taken-up by the cells in 2D, but in a significant less extent in the 3D model. However, these NPs were able to induce an anti-proliferative effect both in the 2D and in the 3D models. Moreover, Nut3a was able to partially shift the polarization of the macrophages present in the MCTS 3D model towards an anti-tumor M1-like phenotype. Overall, the developed MCTS 3D model showed to recapitulate key features of tumors, while representing a valuable model to assess the effect of combinatorial nano-therapeutic strategies in CRC. In addition, the developed NPs could represent a promising approach for CRC treatment. Unlabelled Image [ABSTRACT FROM AUTHOR]

Background: Dual inhibitors of the 5-lipoxygenase-activating protein (FLAP) and the microsomal prostaglandin E2 synthase-1 (mPGES-1) may exert better anti-inflammatory efficacy and lower risks of adverse effects versus non-steroidal anti-inflammatory drugs. Despite these advantages, many dual FLAP/mPGES-1 inhibitors are acidic lipophilic molecules with low solubility and strong tendency for plasma protein binding that limit their bioavailability and bioactivity. Here, we present the encapsulation of the dual FLAP/mPGES-1 inhibitor BRP-187 into the biocompatible polymers acetalated dextran (Acdex) and poly(lactic-co-glycolic acid) (PLGA) via nanoprecipitation. Results: The nanoparticles containing BRP-187 were prepared by the nanoprecipitation method and analyzed by dynamic light scattering regarding their hydrodynamic diameter, by scanning electron microscopy for morphology properties, and by UV–VIS spectroscopy for determination of the encapsulation efficiency of the drug. Moreover, we designed fluorescent BRP-187 particles, which showed high cellular uptake by leukocytes, as analyzed by flow cytometry. Finally, BRP-187 nanoparticles were tested in human polymorphonuclear leukocytes and macrophages to determine drug uptake, cytotoxicity, and efficiency to inhibit FLAP and mPGES-1. Conclusion: Our results demonstrate that encapsulation of BRP-187 into Acdex and PLGA is feasible, and both PLGA- and Acdex-based particles loaded with BRP-187 are more efficient in suppressing 5-lipoxygenase product formation and prostaglandin E2 biosynthesis in intact cells as compared to the free compound, particularly after prolonged preincubation periods. [ABSTRACT FROM AUTHOR]

Objective: To design and characterize aerosol microparticles (MP) to provide sustained release of the water-soluble compound sulforhodamine B (SRB) and achieve effective aerosol dispersion. Significance: Modulating the release of water-soluble compounds remains a challenge in pulmonary drug delivery. Methods: SRB and water made up an aqueous solution, while acetalated dextran (Ac-Dex) and isopropyl alcohol made up an organic solution. The two solutions were mixed together, and the solution was spray dried to produce MP. MP were characterized for morphology, size, release kinetics, aerosol dispersion, and cellular interactions. Results: Ac-Dex MP exhibited corrugated morphology and aerodynamic diameters from 2.06 to 2.86 μm. MP deposited in all stages of a Next Generation Impactor, with >90% fine particle fraction. MP exhibited encapsulation efficiencies >129% with SRB loading values up to 16.7 μg SRB/mg MP. MP exhibited sustained release of SRB at pH 7 and fast release at pH 5. In vitro experiments showed minimal cytotoxicity, successful uptake of MP in epithelial cells, and no disruption to the integrity of epithelial monolayers. Conclusions: Ac-Dex MP systems demonstrated the ability to provide sustained the release of a water-soluble therapeutic in addition to effective aerosol dispersion for pulmonary applications. [ABSTRACT FROM AUTHOR]

Abstract Immunotherapies have significantly improved cancer patient survival, but response rates are still limited. Thus, novel formulations are needed to expand the breadth of immunotherapies. Pathogen associated molecular patterns (PAMPs) can be used to stimulate an immune response, but several pathogen recognition receptors are located within the cell, making delivery challenging. We have employed the biodegradable polymer acetalated dextran (Ace-DEX) to formulate PAMP microparticles (MPs) in order to enhance intracellular delivery. While treatment with four different PAMP MPs resulted in tumor growth inhibition, cyclic GMP-AMP (cGAMP) MPs were most effective. cGAMP MPs showed anti-tumor efficacy at doses 100-1000 fold lower than published doses of soluble cGAMP in two murine tumor models. Treatment with cGAMP MPs resulted in increased natural killer cell numbers in the tumor environment. Immune cell depletion studies confirmed that NK cells were responsible for the anti-tumor efficacy in an aggressive mouse melanoma model. NK cells and CD8+ T cells were both required for early anti-tumor function in a triple negative breast cancer model. In summary, cGAMP MP treatment results in NK and T cell-dependent anti-tumor immune response. Graphical abstract Image 1 [ABSTRACT FROM AUTHOR]

Most FDA-approved adjuvants for infectious agents boost humoral but not cellular immunity, and have poorly-understood mechanisms. Stimulator of interferon genes (STING, also known as MITA, MPYS, or ERIS) is an exciting adjuvant target due to its role in cyclic dinucleotide (CDN)-driven anti-viral immunity; however, a major hindrance is STING's cytosolic localization which requires intracellular delivery of its agonists. As a result, STING agonists administered in a soluble form have elicited suboptimal immune responses. Delivery of STING agonists via particle platforms has proven a more successful strategy, but the opportunity for improved formulations and bioactivity remains. In this study we evaluated the adjuvant activity of the potent STING agonist, CDN 3′3′-cGAMP (cGAMP), encapsulated in acid-sensitive acetalated dextran (Ace-DEX) polymeric microparticles (MPs) which passively target antigen-presenting cells for intracellular release. This formulation was superior to all particle delivery systems evaluated and maintained its bioactivity following a sterilizing dose of gamma irradiation. Compared to soluble cGAMP, the Ace-DEX cGAMP MPs enhanced type-I interferon responses nearly 1000-fold in vitro and 50-fold in vivo , caused up to a 10 4 -fold boost in antibody titers, increased Th1-associated responses, and expanded germinal center B cells and memory T cells. Furthermore, the encapsulated cGAMP elicited no observable toxicity in animals and achieved protective immunity against a lethal influenza challenge seven months post-immunization when using CDN adjuvant doses up to 100-fold lower than previous reports. For these reasons, Ace-DEX MP-encapsulated cGAMP represents a potent vaccine adjuvant of humoral and cellular immunity. [ABSTRACT FROM AUTHOR]

Biocompatible, biodegradable polymers are commonly used as excipients to improve the drug delivery properties of aerosol formulations, in which acetalated dextran (Ac-Dex) exhibits promising potential as a polymer in various therapeutic applications. Despite this promise, there is no comprehensive study on the use of Ac-Dex as an excipient for dry powder aerosol formulations. In this study, we developed and characterized pulmonary drug delivery aerosol microparticle systems based on spray-dried Ac-Dex with capabilities of (1) delivering therapeutics to the deep lung, (2) targeting the particles to a desired location within the lungs, and (3) releasing the therapeutics in a controlled fashion. Two types of Ac-Dex, with either rapid or slow degradation rates, were synthesized. Nanocomposite microparticle (nCmP) and microparticle (MP) systems were successfully formulated using both kinds of Ac-Dex as excipients and curcumin as a model drug. The resulting MP were collapsed spheres approximately 1 μm in diameter, while the nCmP were similar in size with wrinkled surfaces, and these systems dissociated into 200 nm nanoparticles upon reconstitution in water. The drug release rates of the Ac-Dex particles were tuned by modifying the particle size and ratio of fast to slow degrading Ac-Dex. The pH of the environment was also a significant factor that influenced the drug release rate. All nCmP and MP systems exhibited desirable aerodynamic diameters that are suitable for deep lung delivery (e.g. below 5 μm). Overall, the engineered Ac-Dex aerosol particle systems have the potential to provide targeted and effective delivery of therapeutics into the deep lung. [ABSTRACT FROM AUTHOR]

An advanced nanocomposite consisting of an encapsulated porous silicon (PSi) nanoparticle and an acid-degradable acetalated dextran (AcDX) matrix (nano-in-nano), was efficiently fabricated by a one-step microfluidic self-assembly approach. The obtained nano-in-nano PSi@AcDX composites showed improved surface smoothness, homogeneous size distribution, and considerably enhanced cytocompatibility. Furthermore, multiple drugs with different physicochemical properties have been simultaneously loaded into the nanocomposites with a ratiometric control. The release kinetics of all the payloads was predominantly controlled by the decomposition rate of the outer AcDX matrix. To facilitate the intracellular drug delivery, a nona-arginine cell-penetrating peptide (CPP) was chemically conjugated onto the surface of the nanocomposites by oxime click chemistry. Taking advantage of the significantly improved cell uptake, the proliferation of two breast cancer cell lines was markedly inhibited by the CPP-functionalized multidrug-loaded nanocomposites. Overall, this nano-in-nano PSi@polymer composite prepared by the microfluidic self-assembly approach is a universal platform for nanoparticles encapsulation and precisely controlled combination chemotherapy. [ABSTRACT FROM AUTHOR]

• The manuscript focuses on. • Physicochemical characteristics of acetalated dextran in drug delivery. • Controlled delivery by acetalated dextran to the airways. • Management of respiratory diseases by acetalated dextran drug delivery systems. Acetalated dextran is a chemically modified version of the FDA approved polysaccharide 'dextran', which serves as a perspective drug-delivery material for the pulmonary delivery of therapeutics owing to its biodegradability, sensitivity towards acidic pH for stimuli-sensitive drug release, high encapsulation efficacy, chemical conjugation with pharmaceuticals, and potency to cross the mucosal layer. Mainly, the aerosolized dry powder inhalation formulations of drug-loaded acetalated-dextran prove to be the frontrunner candidates for pulmonary delivery for the effective management of chronic respiratory diseases such as lymphangioleiomyomatosis, tularemia, and the contemporary COVID-19 pandemic. The presented communication provides a succinct account of the pulmonary drug delivery applications of acetalated dextran. [ABSTRACT FROM AUTHOR]

Dextran has emerged as a promising biopolymer carrier for controlled release formulations of pesticides. In this study, pH-sensitive acetalated dextran microparticles (Pyr@Ac-Dex) are prepared to encapsulate and control the release of pyraclostrobin (Pyr). In vitro fungicidal activity experiments showed that the prepared Pyr@Ac-Dex particles show comparable fungicidal ability against S. sclerotiorum compared to that of Pyr technical. In a 10-day pot experiment, the control efficacy of the Pyr@Ac-Dex treatment against S. sclerotiorum (77.1%) is significantly higher than that of Pyr emulsifiable concentrate (Pyr EC) treatment (42.4%). Photodegradation experiments show that compared to Pyr technical, Pyr@Ac-Dex doubles the half-life of Pyr in water. Acute toxicity experiments show that Pyr@Ac-Dex significantly reduced the acute exposure toxicity of Pyr to zebrafish. This study provides an environmentally friendly, feasible, and sustainable strategy for plant disease management. [Display omitted] [ABSTRACT FROM AUTHOR]

Natural killer (NK) cells are an important member of the innate immune system and can participate in direct tumor cell killing in response to immunotherapies. One class of immunotherapy is stimulator of interferon gene (STING) agonists, which result in a robust type I interferon (IFN-I) response. Most mechanistic studies involving STING have focused on macrophages and T cells. Nevertheless, NK cells are also activated by IFN-I, but the effect of STING activation on NK cells remains to be adequately investigated. We show that both direct treatment with soluble STING agonist cyclic di-guanosine monophosphate-adenosine monophosphate (cGAMP) and indirect treatment with cGAMP encapsulated in microparticles (MPs) result in NK cell activation in vitro, although the former requires 100× more cGAMP than the latter. Additionally, direct activation with cGAMP leads to NK cell death. Indirect activation with cGAMP MPs does not result in NK cell death but rather cell activation and cell killing in vitro. In vivo, treatment with soluble cGAMP and cGAMP MPs both cause short-term activation, whereas only cGAMP MP treatment produces long-term changes in NK cell activation markers. Thus, this work indicates that treatment with an encapsulated STING agonist activates NK cells more efficiently than that with soluble cGAMP. In both the in vitro and in vivo systems, the MP delivery system results in more robust effects at a greatly reduced dosage. These results have potential applications in aiding the improvement of cancer immunotherapies.

Tumoricidal neural stem cells (NSCs) are an emerging therapy to combat glioblastoma (GBM). This therapy employs genetically engineered NSCs that secrete tumoricidal agents to seek out and kill tumor foci remaining after GBM surgical resection. Biomaterial scaffolds have previously been utilized to deliver NSCs to the resection cavity. Here, we investigated the impact of scaffold degradation rate on NSC persistence in the brain resection cavity. Composite acetalated dextran (Ace-DEX) gelatin electrospun scaffolds were fabricated with two distinct degradation profiles created by changing the ratio of cyclic to acyclic acetal coverage of Ace-DEX. In vitro , fast degrading scaffolds were fully degraded by one week, whereas slow degrading scaffolds had a half-life of >56 days. The scaffolds also retained distinct degradation profiles in vivo. Two different NSC lines readily adhered to and remained viable on Ace-DEX gelatin scaffolds, in vitro. Therapeutic NSCs secreting tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) had the same TRAIL output as tissue culture treated polystyrene (TCPS) when seeded on both scaffolds. Furthermore, secreted TRAIL was found to be highly potent against the human derived GBM cell line, GBM8, in vitro. Firefly luciferase expressing NSCs were seeded on scaffolds, implanted in a surgical resection cavity and their persistence in the brain was monitored by bioluminescent imaging (BLI). NSC loaded scaffolds were compared to a direct injection (DI) of NSCs in suspension, which is the current clinical approach to NSC therapy for GBM. Fast and slow degrading scaffolds enhanced NSC implantation efficiency 2.87 and 3.08-fold over DI, respectively. Interestingly, scaffold degradation profile did not significantly impact NSC persistence. However, persistence and long-term survival of NSCs was significantly greater for both scaffolds compared to DI, with scaffold implanted NSCs still detected by BLI at day 120 in most mice. Overall, these results highlight the benefit of utilizing a scaffold for application of tumoricidal NSC therapy for GBM. • Polymer and collagen scaffolds with distinct degradation profiles were fabricated. • Scaffolds helped to delivery tumoricidal neural stem cells (NSCs) for therapy. • Viability and tumoricidal agent output were not affected by scaffold degradation. • NSC persistence in the brain resection cavity increased with scaffold delivery. • Scaffold degradation does not significantly influence NSC persistence in the brain. [ABSTRACT FROM AUTHOR]

Hyperforin, a highly hydrophobic prenylated acylphloroglucinol from the medical plant St. John's Wort, possesses anti-inflammatory properties and suppresses the formation of proinflammatory leukotrienes by inhibiting the key enzyme 5-lipoxygenase (5-LO). Despite its strong effectiveness and the unique molecular mode of interference with 5-LO, the high lipophilicity of hyperforin hampers its efficacy in vivo and, thus, impairs its therapeutic value, especially because of poor water solubility and strong plasma (albumin) protein binding. To overcome these hurdles that actually apply to many other hydrophobic 5-LO inhibitors, we have encapsulated hyperforin into nanoparticles (NPs) consisting of acetalated dextran (AcDex) to avoid plasma protein binding and thus improve its cellular supply under physiologically relevant conditions. Encapsulated hyperforin potently suppressed 5-LO activity in human neutrophils, but it failed to interfere with 5-LO activity in a cell-free assay, as expected. In the presence of human serum albumin (HSA), hyperforin was unable to inhibit cellular 5-LO activity, seemingly because of strong albumin binding. However, when encapsulated into NPs, hyperforin caused strong inhibition of 5-LO activity in the presence of HSA. Together, encapsulation of the highly hydrophobic hyperforin as a representative of lipophilic 5-LO inhibitors into AcDex-based NPs allows for efficient inhibition of 5-LO activity in neutrophils in the presence of albumin because of effective uptake and circumvention of plasma protein binding.

Nanoparticles (NPs) based on the biodegradable acetalated dextran polymer (Ac-Dex) were used for near-infrared (NIR) imaging and controlled delivery of a Pt IV prodrug into cancer cells. The Ac-Dex NPs loaded with the hydrophobic Pt IV prodrug 3 (Pt IV /Ac-Dex NPs) and with the novel hydrophobic NIR-fluorescent dye 9 (NIR-dye 9/Ac-Dex NPs), as well as Ac-Dex NPs coloaded with both compounds (coloaded Ac-Dex NPs), were assembled using a single oil-in-water nanoemulsion method. Dynamic light scattering measurements and scanning electron microscopy images showed that the resulting Ac-Dex NPs are spherical with an average diameter of 100 nm, which is suitable for accumulation in tumors via the enhanced permeation and retention effect. The new nanosystems exhibited high drug-loading capability, high encapsulation efficiency, high stability in physiological conditions, and pH responsiveness. Drug-release studies clearly showed that the Pt IV prodrug 3 release from Ac-Dex NPs was negligible at pH 7.4, whereas at pH 5.5, this compound was completely released with a controlled rate. Confocal laser scanning microscopy unambiguously showed that the NIR-dye 9/Ac-Dex NPs were efficiently taken up by MCF-7 cells, and cytotoxicity assays against several cell lines showed no significant toxicity of blank Ac-Dex NPs up to 1 mg mL -1 . The IC 50 values obtained for the Pt IV prodrug encapsulated in Ac-Dex NPs were much lower when compared with the IC 50 values obtained for the free Pt IV complex and cisplatin in all cell lines tested. Overall, our results demonstrate, for the first time, that Ac-Dex NPs constitute a promising drug delivery platform for cancer therapy.

Previously we have encapsulated host-directed therapy AR-12 into acetalated dextran (Ace-DEX) microparticles (MPs) to mitigate drug toxicity and passively target phagocytic host cells. Herein, we have improved upon our initial emulsion-based formulation of Ace-DEX MPs encapsulating AR-12 (AR-12/MPs) by improving the drug encapsulation efficiency, evaluating sterilization processes for manufacturing, and understanding cellular and in vivo trafficking of the MPs. By using an alternative solvent system, ethyl acetate, we report an increased encapsulation efficiency of AR-12 while maintaining the pH-responsive degradation kinetics of Ace-DEX MPs. To better manufacture this novel antimicrobial formulation, we sterilized AR-12/MPs by gamma irradiation or ethylene oxide and evaluated their efficacy against intracellular Salmonella enterica serovar Typhi. Sterilized AR-12/MPs resulted in a significant reduction in intracellular bacterial burden compared to Blank/MPs. We also characterized intracellular trafficking of Ace-DEX MPs encapsulating fluorophores, which demonstrated internalization of MPs in endo/lysosomal compartments and time and degradation-rate dependent lysosomal escape into cytosolic compartments. Additionally, in vivo toxicity was mitigated following encapsulation of AR-12, where the maximum tolerated dose of AR-12 was increased compared to soluble treatment via intranasal, intravenous, and intraperitoneal administration routes. Following in vivo trafficking of Ace-DEX MPs via the same routes, intranasal administration demonstrated the highest accumulation in the lungs, liver, and kidneys, which persisted out to 240 h. Overall, we have advanced the formulation of this host-directed therapy and broadened the understanding of Ace-DEX MP delivery.

Vaccines are the most effective tool for preventing infectious diseases; however, subunit vaccines, considered the safest type, suffer from poor immunogenicity and require adjuvants to create a strong and sustained immune response. As adjuvants, pathogen-associated molecular patterns (PAMPs) offer potent immunostimulatory properties and defined mechanisms of action through their cognate pattern recognition receptors (PRRs). Their activity can be further enhanced through combining two or more PAMPs, particularly those that activate multiple immune signaling pathways. However, the cytosolic localization of many PRRs requires intracellular delivery of PAMPs for optimal biological activity, which is particularly true of the stimulator of interferon genes (STING) PRR. Using acetalated dextran (Ace-DEX) microparticles (MPs) encapsulating STING agonist 3'3'-cyclic GMP-AMP (cGAMP) combined with soluble PAMPS, we screened the effect of codelivery of adjuvants using primary mouse bone marrow derived dendritic cells (BMDCs). We identified that codelivery of cGAMP MPs and soluble Toll-like receptor 7/8 (TLR7/8) agonist resiquimod (R848) elicited the broadest cytokine response. cGAMP and R848 were then coencapsulated within Ace-DEX MPs via electrospray. Using the model antigen ovalbumin, we observed that Ace-DEX MPs coencapsulating cGAMP and R848 (cGAMP/R848 Ace-DEX MPs) induced antigen-specific cellular immunity, and a balanced Th1/Th2 humoral response that was greater than cGAMP Ace-DEX MPs alone and PAMPs delivered in separate MPs. These data indicate that polymeric Ace-DEX MPs loaded with STING and TLR7/8 agonists represent a potent cellular and humoral vaccine adjuvant.

Surface modifications of nanoparticles can alter their physical and biological properties significantly. They effect particle aggregation, circulation times, and cellular uptake. This is particularly critical for the interaction with primary immune cells due to their important role in particle processing. We can show that the introduction of a hydrophilic PEG layer on the surface of the polysaccharide-based nanoparticles prevents unwanted aggregation under physiological conditions and decreases unspecific cell uptake in different primary immune cell types. The opposite effect can be observed with a parallel-performed introduction of a layer of low molecular weight dextran (3.5 and 5 kDa) on the particle surface (DEXylation) that encourages the nanoparticle uptake by antigen-presenting cells like macrophages and dendritic cells. Binding of DEXylated particles to these immune cells results in an upregulation of surface maturation markers and elevated production of proinflammatory cytokines, reflecting cell activation. Hence, DEXylated particles can potentially be used for passive targeting of antigen presenting cells with inherent adjuvant function for future immunotherapeutic applications.

Structural features of nanoparticles have recently been explored for different types of applications. To explore specific particles as nanomedicine and physically destroy cancer is interesting, which might avoid many obstacles in cancer treatment, for example, drug resistance. However, one key element and technical challenge of those systems is to selectively target them to cancer cells. As a proof-of-concept, Prickly zinc-doped copper oxide (Zn-CuO) nanoparticles (Prickly NPs) have been synthesized, and subsequently encapsulated in a pH-responsive polymer; and the surface has been modified with a novel synthesized ligand, 3-(cyclooctylamino)-2,5,6-trifluoro-4-[(2-hydroxyethyl)sulfonyl] benzenesulfonamide (VD1142). The Prickly NPs exhibit very effective cancer cell antiproliferative capability. Moreover, the polymer encapsulation shields the Prickly NPs from unspecific nanopiercing and, most importantly, VD1142 endows the engineered NPs to specifically target to the carbonic anhydrase IX, a transmembrane protein overexpressed in a wide variety of cancer tumors. Intracellularly, the Prickly NPs disintegrate into small pieces that upon endosomal escape cause severe damage to the endoplasmic reticulum and mitochondria of the cells. The engineered Prickly NP is promising in efficient and targeted cancer treatment and it opens new avenue in nanomedication., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Immunoadjuvant porous silicon (PSi)-based nanovaccines are prepared by nanoprecipitation in a glass capillary microfluidics device. Vesicles, derived from cancer cell membranes encapsulating thermally oxidized PSi nanoparticles or PSi-polymer nanosystems binding a model antigen, are biocompatible over a wide range of concentrations, and show immunostimulant properties in human cells, promoting the expression of co-stimulatory signals and the secretion of pro-inflammatory cytokines., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Injectable biomaterials are promising as new therapies to treat myocardial infarction (MI). One useful property of biomaterials is the ability to protect and sustain release of therapeutic payloads. In order to create a platform for optimizing the release rate of cardioprotective molecules we utilized the tunable degradation of acetalated dextran (AcDex). We created microparticles with three distinct degradation profiles and showed that the consequent protein release profiles could be modulated within the infarcted heart. This enabled us to determine how delivery rate impacted the efficacy of a model therapeutic, an engineered hepatocyte growth factor fragment (HGF-f). Our results showed that the cardioprotective efficacy of HGF-f was optimal when delivered over three days post-intramyocardial injection, yielding the largest arterioles, fewest apoptotic cardiomyocytes bordering the infarct and the smallest infarcts compared to empty particle treatment four weeks after injection. This work demonstrates the potential of using AcDex particles as a delivery platform to optimize the time frame for delivering therapeutic proteins to the heart.