Search

Mandibular reconstruction is essential for restoring both function and aesthetics after segmental resection due to tumoral pathology. This study aimed to conduct a comparative analysis of three reconstruction strategies for defects resulting from segmental mandibular resection, utilizing finite element analysis (FEA). Methods: A digital model of the mandible was created from CBCT data and optimized for FEA. Three reconstruction scenarios were simulated: fixation with a titanium plate, reconstruction with an autogenous fibular graft stabilized with the same titanium plate, and fixation with a customized PEEK plate. Various plate thicknesses were analyzed to determine the stress and deformation patterns under masticatory loads. Results: Titanium plates provided superior mechanical stability but showed stress concentrations near screw fixation points. The addition of autogenous bone grafts reduced stress on the plate and improved structural integrity. PEEK plates exhibited reduced stress shielding and better load distribution, but thinner designs were prone to deformation. Minimum recommended thicknesses of 1.2 mm for titanium plates and 1.8 mm for PEEK plates were identified by FEA. Conclusions: This study highlights the importance of material selection and patient-specific design in mandibular reconstruction. Autogenous bone grafts combined with titanium plates demonstrated the best biomechanical outcomes, while PEEK plates offer a promising alternative, particularly for patients where grafting is contraindicated. [ABSTRACT FROM AUTHOR]

It was assumed that only autogenous bone had appropriate osteoconductive and osteoindutive properties for bone regeneration, but this assumption has been challenged. Many studies have shown that synthetic biomaterials must be considered as the best choice for guided bone regeneration. The objective of this work is to compare the performances of nanohydroxyapatite/β-tricalcium phosphate (n-HA/β-TCP) composite and autogenous bone grafting in bone regeneration applications. The composite was characterized by scanning electron microscopy (SEM) and used as an allograft in bone defects formed in adult Wistar rats. The bone defects in the dorsal cranium were grafted with autogenous bone on one side and the n-HA/β-TCP composite on the other. Histomorphometry evaluation via different staining methods (Goldner trichrome, PAS, and Sirius red) and TRAP histochemistry were performed. Immunohistomorphometries of OPN, Cathepsin K, TRAP, acid phosphatase, VEGF, NFκ-β, MMP-2, MMP-9, and TGF-β were carried out. The RT-PCR method was also applied to to RANK-L, Osteocalcine, Alcaline Phosphatase, Osterix, and Runx2. The results showed that for all morphometric evaluations with the different staining methods, histochemistry, and immunohistochemistry, VEGF and NFκ-β were higher in the n-HA/β-TCP composite group than in the autogenous bone graft group. The RT-PCR markers were higher in the autogenous bone group than in the n-HA/β-TCP composite group. The n-HA/β-TCP composite exhibited enhanced cell–matrix interactions in bone remodeling, higher adhesion, proliferation, and differentiation, and increased vascularization. These results suggest that the n-HA/β-TCP composite induces faster bone formation than autogenous bone grafting. [ABSTRACT FROM AUTHOR]

The aim of the study was to assess the bone gain achieved through guided bone regeneration (GBR) techniques using bovine-origin xenograft versus porcine-origin xenograft combined with autogenous bone. Materials and method. The study was conducted on 62 patients (28 male; 34 female), aged between 40-79 years. All patients had partial edentulousness and were candidates for dental implants and the rehabilitation of the resorbed alveolar bone through guided tissue regeneration (GTR) techniques. The characteristics of the study groups are presented in Tables 1.1-1.2. Based on the type of graft material used, the patients were divided into two study groups: bovine-origin xenograft + autogenous bone group (30 patients; 41 implant sites); porcine-origin xenograft + autogenous bone group (32 patients; 50 implant sites). The CBCT examination (Sirona Orthophos XG) was used to measure alveolar bone parameters (preoperatively and six months postoperatively): height, width, and osteodensity of the alveolar bone at the implant sites. Results. The average vertical bone gain (height) was lower in alveolar sites reconstructed with bovine-origin xenografts combined with autogenous bone (5.3076 mm) compared to those reconstructed with porcine-origin xenografts combined with autogenous bone (5.8736 mm). The average horizontal bone gain (width) was higher in alveolar sites reconstructed with bovine-origin xenografts combined with autogenous bone (4.4273 mm) compared to those reconstructed with porcine-origin xenografts combined with autogenous bone (4.1624 mm). The osteodensity gain was higher in alveolar sites reconstructed with bovine-origin xenografts combined with autogenous bone (279.59 HU) compared to those reconstructed with porcine-origin xenografts combined with autogenous bone (254.24 HU). Conclusions. Post-operative bone gain in vertical and horizontal dimensions, as well as osteodensity, were statistically significant both in the overall group and for each of the investigated categories (sex, age group, location). The use of guided bone regeneration technique using combination of xenografts with autogenous bone are effective in the reconstruction of alveolar bone.

The aim of the study was to assess the bone gain achieved through guided bone regeneration (GBR) techniques using bovine-origin xenograft versus porcine-origin xenograft combined with autogenous bone. Materials and method. The study was conducted on 62 patients (28 male; 34 female), aged between 40-79 years. All patients had partial edentulousness and were candidates for dental implants and the rehabilitation of the resorbed alveolar bone through guided tissue regeneration (GTR) techniques. The characteristics of the study groups are presented in Tables 1.1-1.2. Based on the type of graft material used, the patients were divided into two study groups: bovine-origin xenograft + autogenous bone group (30 patients; 41 implant sites); porcine-origin xenograft + autogenous bone group (32 patients; 50 implant sites). The CBCT examination (Sirona Orthophos XG) was used to measure alveolar bone parameters (preoperatively and six months postoperatively): height, width, and osteodensity of the alveolar bone at the implant sites. Results. The average vertical bone gain (height) was lower in alveolar sites reconstructed with bovine-origin xenografts combined with autogenous bone (5.3076 mm) compared to those reconstructed with porcine-origin xenografts combined with autogenous bone (5.8736 mm). The average horizontal bone gain (width) was higher in alveolar sites reconstructed with bovine-origin xenografts combined with autogenous bone (4.4273 mm) compared to those reconstructed with porcine-origin xenografts combined with autogenous bone (4.1624 mm). The osteodensity gain was higher in alveolar sites reconstructed with bovine-origin xenografts combined with autogenous bone (279.59 HU) compared to those reconstructed with porcine-origin xenografts combined with autogenous bone (254.24 HU). Conclusions. Postoperative bone gain in vertical and horizontal dimensions, as well as osteodensity, were statistically significant both in the overall group and for each of the investigated categories (sex, age group, location). The use of guided bone regeneration technique using combination of xenografts with autogenous bone are effective in the reconstruction of alveolar bone. [ABSTRACT FROM AUTHOR]

BACKGROUND: Although the clinical application of Masquelet technology has achieved extensive success, the research on optimizing all aspects of Masquelet technology is still being carried out. The focus of doctors is to speed up bone healing and shorten bone healing time after bone grafting. OBJECTIVE: To observe the effect of calcium phosphate combined with recombinant human bone morphogenetic protein-2 in repairing tibial infectious bone defects. METHODS: Thirty-one patients with tibial infectious bone defects were selected from The People’s Hospital of Jianyang City from June 2017 to June 2022. They were treated with the Masquelet membrane induction technique. During the second stage of operation, they were divided into a control group (n=15) and a study group (n=16) according to different bone graft materials. Patients in the control group were implanted with autologous bone/allogeneic bone particles, and those in the study group were implanted with calcium phosphate combined with recombinant human bone morphogenetic protein-2/autologous bone particles. Six months after the second stage operation, peripheral blood inflammatory indexes such as white blood cell count, C-reactive protein, and erythrocyte sedimentation rate were detected. Imaging bone healing time, bone healing X-ray score, bone defect healing classification, and adjacent joint function were recorded. The presence of nail track infection, implant absorption, pain, and infection in the bone extraction area were observed. RESULTS AND CONCLUSION: (1) White blood cell count, erythrocyte sedimentation rate, and C-reactive protein levels of the two groups 6 months after the second stage operation were significantly lower than those before the first stage operation (P < 0.05). There was no significant difference in each index between the two groups (P > 0.05). (2) Bone healing time in the study group was shorter than that in the control group (P < 0.05). (3) The Samantha X-ray score of the study group 6 months after the second stage operation was higher than that of the control group (P < 0.05). The excellent and good rate of bone defect healing and adjacent joint function of the study group was higher than that of the control group (P < 0.05). There was no significant difference in the recurrence rate and complication rate between the two groups (P > 0.05). (4) These findings indicate that the effect of calcium phosphate combined with recombinant human bone morphogenetic protein-2 during the second stage operation of the Masquelet membrane induction technique in the treatment of tibial infectious bone defect is good and safe. [ABSTRACT FROM AUTHOR]

Abstract Objectives Autogenous and allogeneic blocks for shell augmentation of the jaw have shown comparable results. This observational clinical study aimed to compare both materials for shell augmentation concerning surgery time and intra- and postoperative complications. Material and methods Bone augmentation with the shell technique using autogenous or allogenous bone was performed in 117 patients with segmental jaw atrophy. The primary study parameter was the surgical time, comparing both materials. Subsequently, intra- and postoperative complications were recorded. Results Allogeneic (n = 60), autogenous (n = 52), or both materials (n = 5) were used. The use of allogeneic material led to a significantly shorter operation time (p 0.05). In total, 229 implants were inserted after a healing time of 4–6 months, with a survival of 99.6% after a mean follow-up duration of 9 months. Conclusions Compared to the autogenous technique, allogeneic shell augmentation has a shorter surgical time and a similar rate of intra- and postoperative complications as autogenous bone. Together with its promising clinical results, this technique can be recommended. Graphical Abstract

Abstract Introduction Bone augmentation procedures are established tools for reshaping the alveolar ridge and increasing bone volume. Different approaches are being used to measure postoperative bone volume gain. This study aimed to develop an objective and automated volume measurement tool equally as precise as manual slice-by-slice annotation. Materials and methods To evaluate the proposed workflow, we performed an in vitro study with 20 pig mandibles that were grafted using three different grafting techniques—autogenous full block, split block bone and shell augmentation. The pig jaws were scanned pre- and postoperatively using an intraoral scanner. The resulting surface files (baseline, full block, split block, shell) were processed using the new volume-measuring workflow as well as using manual slice-by-slice annotation at baseline (t0) and at 6 months (t1) using the same population. Two TOSTs (Test of One-Sided Significance) and NHSTs (Null Hypothesis Significance Test) were used to compare the two workflows. The intra-rater reliability between t0 and t1 was determined using intraclass correlation coefficients. Results The mean difference for the full block augmentation technique was − 0.015 cm3 (p

Objectives: Autogenous and allogeneic blocks for shell augmentation of the jaw have shown comparable results. This observational clinical study aimed to compare both materials for shell augmentation concerning surgery time and intra- and postoperative complications. Material and methods: Bone augmentation with the shell technique using autogenous or allogenous bone was performed in 117 patients with segmental jaw atrophy. The primary study parameter was the surgical time, comparing both materials. Subsequently, intra- and postoperative complications were recorded. Results: Allogeneic (n = 60), autogenous (n = 52), or both materials (n = 5) were used. The use of allogeneic material led to a significantly shorter operation time (p < 0.001). A more experienced surgeon needed significantly less time than a less experienced surgeon (p < 0.001). An increasing number of bone shells (p < 0.001), an additional sinus floor elevation, and intraoperative complications also significantly increased the operation time (p = 0.001). Combining allogeneic and autogenous shells (p = 0.02) and simultaneous sinus floor elevation (p = 0.043) significantly impacted intraoperative complications. No correlations were found between the included variables for postoperative complications (all p > 0.05). In total, 229 implants were inserted after a healing time of 4–6 months, with a survival of 99.6% after a mean follow-up duration of 9 months. Conclusions: Compared to the autogenous technique, allogeneic shell augmentation has a shorter surgical time and a similar rate of intra- and postoperative complications as autogenous bone. Together with its promising clinical results, this technique can be recommended. [ABSTRACT FROM AUTHOR]

Purpose: Intraoral bone blocks from the external oblique are the gold standard for alveolar ridge bone grafting, but the limited amount of available bone limits their use for larger defects. The objective of this study was to compare whether different graft designs of intraoral bone blocks could affect the amount of bone gain. Materials and Methods: In this in vitro study, 20 pig jaws were used to harvest bone blocks and subsequently augment single-wall bone defects. Each bone graft was first used as a full block, and then the same block was divided lengthwise into two blocks, with one block fixed at a distance as a cortical shell and the second block particulated to fill the gap between graft and bone. Three stereolithographic (STL) files (pre-OP, full block, split block) were generated using an intraoral scanner. All STL files were evaluated for volume gain and horizontal bone dimensions. Results: A mean volume gain of 0.36 cm2 (SD: 0.09) was achieved for the full block and 0.78 cm2 (SD: 0.14) for the split block using the same block. The difference was statistically significant (P < .0001). A mean horizontal bone gain of 4.37 mm (SD: 0.93) was achieved with a full block and 5.77 mm (SD: 0.85) with the shell technique (P < .0001). Conclusion: With the same amount of bone removed, first as a full block and then as a split block, the split-block technique achieved a significantly higher bone gain compared with the full-block design. [ABSTRACT FROM AUTHOR]

The possibilities for oral bone regeneration procedures vary depending on the type of bone defect to be treated, which in turn dictate the type of graft to be used. Atrophic alveolar ridges are non‐contained defects and pose a challenging defect morphology for bone regeneration/augmentation. Successful results are regularly obtained with the use of particulate grafts in combination with barrier membranes. In cases of very narrow ridges with need of larger amount of bone augmentation, block grafts are often used. Fresh‐frozen allogeneic bone block grafts have been proposed as an alternative to autogenous (AT) bone blocks. Based on a systematic appraisal of pre‐clinical in vivo studies and clinical trials including a direct comparison of fresh‐frozen bone (FFB) blocks versus AT bone blocks it can be concluded that a FFB block graft: (a) cannot be considered as a reliable replacement of a AT bone block, and (b) should only be considered in cases where the amount of necessary augmentation—in a lateral direction—is relatively limited, so that the main portion of the body of the implant lies within the inner (i.e., the vital) aspect of the block. [ABSTRACT FROM AUTHOR]

Introduction: Bone augmentation procedures are established tools for reshaping the alveolar ridge and increasing bone volume. Different approaches are being used to measure postoperative bone volume gain. This study aimed to develop an objective and automated volume measurement tool equally as precise as manual slice-by-slice annotation. Materials and methods: To evaluate the proposed workflow, we performed an in vitro study with 20 pig mandibles that were grafted using three different grafting techniques—autogenous full block, split block bone and shell augmentation. The pig jaws were scanned pre- and postoperatively using an intraoral scanner. The resulting surface files (baseline, full block, split block, shell) were processed using the new volume-measuring workflow as well as using manual slice-by-slice annotation at baseline (t0) and at 6 months (t1) using the same population. Two TOSTs (Test of One-Sided Significance) and NHSTs (Null Hypothesis Significance Test) were used to compare the two workflows. The intra-rater reliability between t0 and t1 was determined using intraclass correlation coefficients. Results: The mean difference for the full block augmentation technique was − 0.015 cm3 (p < 0.001); for the split block technique, it was − 0.034 cm3p = 0.01, and for the shell technique, it was − 0.042 cm3. All results were statistically not different from zero and statistically equivalent to zero. The results also showed an excellent absolute intra-rater agreement. Conclusions: The semiautomatic volume measurement established in this article achieves comparable results to manual slice-by-slice measuring in determining volumes on STL files generated by intraoral scanners and shows an excellent intra-rater reliability. [ABSTRACT FROM AUTHOR]

Bone grafting for implant dentistry depends on bone quality, quantity, and biological principles for good outcome. Autogenous bone as donor remains the gold standard among all the available materials. However, it carries unpredictable morbidity and need for different surgical sites. In our report, we describe a simplified approach in bone augmentation for restricted maxillary atrophic defect within the same surgical site as a harvesting site. The method can be an alternative for different intraoral surgical harvesting sites. The patient's left maxillary central incisor before treatment had a large bony defect which was reconstructed though single site approach of augmentation. The implant-supported restoration with healthy periodontium around even after 2 years of review looks promising. The approach can be an alternative for different intraoral surgical sites. [ABSTRACT FROM AUTHOR]

The spine is the most common site of bone metastases. Many cancer patients will ultimately develop spinal metastatic disease with symptomatic epidural spinal cord compression. At present, the main treatment for cervical spine tumors is surgical resection combined with postoperative radiotherapy. Implant materials for cervical spine anterior column reconstruction need to meet amounts of different properties, such as biocompatibility, bioactivity and the ability to maintain long‐term mechanical strength. The selection of different materials determines the surgical efficacy and prognosis of patients to a certain extent. This article provides an overview of a variety of implant materials used for anterior column reconstruction after cervical spine tumor resection, introduces and analyzes their properties, advantages, disadvantages, derivatives, and applications in clinical practice, and looks forward to the future development of implant materials.

Objective To evaluate the osteogenic effects of using a 3D-printed bredigite(BRT) bone scaffold on the Onlay graft in rats. Methods BRT scaffold material was fabricated by 3D printing technology as the experimental group, β-tricalcium phosphate(β-TCP) bone scaffolds were used as the control group. The scaffolds were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical test and in vitro degradation test. An animal model of Onlay graft in SD rats was established. According to the different grafts, the animal model was divided into autogenous bone transplantation group (Auto Group), β- TCP group and BRT group. At 12 weeks after the operation, the target line was obtained for gross observation, micro CT scanning and analysis, and HE staining histological analysis. Results BRT scaffolds have distinctive surface topographywith relatively uniformly sized pores in SEM imaging. A higher mechanical strength and degradation rate was obtained with BRT scaffolds（46.80 ± 3.44) MPa, compared to β-TCP scaffolds（11.29 ± 1.30) MPa (P

Bone regeneration of large maxillary and mandibular alveolar ridge defects is clinically challenging. Various techniques have been described for the reconstruction of these deficiencies before implant placement. The tent screw-pole technique is one of the effective methods available for clinicians to perform the predictable functional and esthetic reconstruction. The aim of this prospective report was to evaluate clinical and three-dimensional radiographic analyses of two patients treated with xenograft and particulate autogenous bone using tenting screws for regeneration of compromised partial edentulous ridges.

Bone grafting for implant dentistry depends on bone quality, quantity, and biological principles for good outcome. Autogenous bone as donor remains the gold standard among all the available materials. However, it carries unpredictable morbidity and need for different surgical sites. In our report, we describe a simplified approach in bone augmentation for restricted maxillary atrophic defect within the same surgical site as a harvesting site. The method can be an alternative for different intraoral surgical harvesting sites. The patient's left maxillary central incisor before treatment had a large bony defect which was reconstructed though single site approach of augmentation. The implant-supported restoration with healthy periodontium around even after 2 years of review looks promising. The approach can be an alternative for different intraoral surgical sites.

Purpose: The purpose of this study was to evaluate bone repair with two bone substitutes, deproteinized bovine bone and biphasic calcium phosphate ceramics, associated with autogenous bone. Materials and Methods: The experimental groups were as follows: autogenous bone only (AB), autogenous bone/deproteinized bovine bone (1:1), and autogenous bone/biphasic calcium phosphate ceramic (1:1). After 30, 60, and 90 days, animals were euthanized and samples were collected for microcomputed tomography (micro-CT), histologic, histomorphometric, and expression analyses of VEGFA, RUNX2, ALP, COL1A1, OCN, PHEX, RANKL, and OPG genes by real-time polymerase chain reaction (PCR) array. Results: Histomorphometric analysis showed no difference in the amount of immature bone between AB and AB/biphasic calcium phosphate ceramic at 30 and 60 days. There was less mature bone formation in the AB/deproteinized bovine bone at 60 days compared with AB/biphasic calcium phosphate ceramic and AB, and a lower amount of immature bone in the AB/deproteinized bovine bone at 30 and 60 days compared with the AB (P ≤ .05). Micro-CT analysis showed higher immature bone volume (BVI) in the AB/biphasic calcium phosphate ceramic at 60 days and lower BVI at 90 days (P ≤ .05). Molecular analysis showed a lower expression of all genes in the AB/deproteinized bovine bone and AB/biphasic calcium phosphate ceramic compared with AB at all time points. A greater expression of RANKL was found in the AB/deproteinized bovine bone compared with AB/biphasic calcium phosphate ceramic at 30 days (P ≤ .05), and a lower expression of the OC, RUNX2, and ALP genes in AB/deproteinized bovine bone and AB/biphasic calcium phosphate ceramic was found compared with AB at all time points (P ≤ .05). Conclusion: The use of biphasic calcium phosphate ceramic resulted in greater immature bone formation than deproteinized bovine bone at an early assessment. The studied bone regeneration genes were downregulated in comparison to the control. [ABSTRACT FROM AUTHOR]

Copyright of China Journal of Oral & Maxillofacial Surgery is the property of Shanghai Jiao Tong University, College of Stomatology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The spine is the most common site of bone metastases. Many cancer patients will ultimately develop spinal metastatic disease with symptomatic epidural spinal cord compression. At present, the main treatment for cervical spine tumors is surgical resection combined with postoperative radiotherapy. Implant materials for cervical spine anterior column reconstruction need to meet amounts of different properties, such as biocompatibility, bioactivity and the ability to maintain long‐term mechanical strength. The selection of different materials determines the surgical efficacy and prognosis of patients to a certain extent. This article provides an overview of a variety of implant materials used for anterior column reconstruction after cervical spine tumor resection, introduces and analyzes their properties, advantages, disadvantages, derivatives, and applications in clinical practice, and looks forward to the future development of implant materials. [ABSTRACT FROM AUTHOR]

Bone regeneration of large maxillary and mandibular alveolar ridge defects is clinically challenging. Various techniques have been described for the reconstruction of these deficiencies before implant placement. The tent screw-pole technique is one of the effective methods available for clinicians to perform the predictable functional and esthetic reconstruction. The aim of this prospective report was to evaluate clinical and three-dimensional radiographic analyses of two patients treated with xenograft and particulate autogenous bone using tenting screws for regeneration of compromised partial edentulous ridges. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to examine the volumetric alterations and osseointegration properties in the augmented area of the ring technique using different types of bone graft material in sheep mandible bone. Materials and Methods: Three different materials (columnar forms, 7-mm diameter, 3-mm height) were stabilized using dental implants with a turned surface in the mandible bone of Finnish Dorset cross-bred sheep: group A, autogenous bone; group B, bovine bone; group C, biphasic bone substitute. Animals were euthanized after 5 weeks (N = 6). Three-dimensional image data by digital oral scanner were taken at the surgery and sacrifice, and the volume alteration of the material was calculated. The bone samples were fixed in formalin and dehydrated in ethanol. Resin-embedded samples were subjected to non-decalcified ground sectioning, and histologic and histomorphometric analysis (bone and material area alteration, bone-to-implant contact [BIC]) were done. Results: In three-dimensional (3D) image analysis, group A showed a statistically higher percentage of remaining materials compared with groups B and C. The histologic observation showed no new bone formations around the implants in all groups, especially at the maxillary site of the implant in the augmented area. In histomorphometric analysis, group A showed a statistically higher percentage of bone area (BA) compared with groups B and C; however, in all groups, bone-to-implant contact (BIC) showed low values, and there were no statistical differences between groups. Conclusion: The results of this study suggested that the autogenous bone maintained bone volume around the dental implant using the ring technique, and the impact of surface properties was of some importance; osseointegration with the turned surface in the augmented area showed low BIC values in all groups. [ABSTRACT FROM AUTHOR]

Purpose: To present the medium-term results of one-stage guided bone regeneration (GBR) using autologous bone and anorganic bovine bone, placed in layers, in association with resorbable collagen membranes, for the reconstruction of horizontal bony defects. Materials and methods: This study was designed as an uncontrolled prospective study. Partially edentulous patients, having less than 6.0 mm and more than 4.0 mm of residual horizontal bone width were selected and consecutively treated with simultaneously implant installation and bone regeneration by using 2.0 mm of autologous bone and 2.0 mm of anorganic bovine bone that was placed in layers and then covered with a resorbable collagen membrane. Outcome measures were: implant and prosthesis failures, any complications, peri-implant marginal bone level changes, probing pocket depth (PPD) and bleeding on probing (BOP). Results: In total, 45 consecutive patients (20 male, 25 female) with a mean age of 52.1 years each received at least one GBR procedure, with contemporary placement of 63 implants. At the 3-year follow-up examination, no patient had dropped out and no deviation from the original protocol had occurred. No implant or prosthesis failed. In six patients (13.3%) the collagen membrane was slightly exposed 1 to 2 weeks after bone reconstruction. Four of these patients were moderate smokers. Post-hoc analysis using Fisher's exact test found significant association (P = 0.0139) between a smoking habit and early membrane exposure. Mean marginal bone loss experienced between initial loading and 30 months afterwards was 0.60 ± 0.20 mm (95% CI 0.54 - 0.66). The mean BOP values measured at the definitive restoration delivery were 1.23 ± 0.93, while 2 years later they were 1.17 ± 0.78. The difference was not statistically significant (-0.06 ± 0.76; P = 0.569). The mean PPD values measured at the definitive restoration delivery were 2.62 ± 0.59 mm, while 2 years later they were 2.60 ± 0.54 mm. The difference was not statistically significant (-0.03 ± 0.62; P = 0.765). Conclusions: Within the limitations of the present study, the use of a 2.0 mm layer of particulated autologous bone on the implant threads, and a 2.0 mm layer of anorganic bovine to cover the resorbed ridge, in combination with the resorbable collagen membrane, seems to be a viable treatment option for the reconstruction of horizontal bony defects. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to assess the differences between a leukocyte- and platelet-rich fibrin (L-PRF) and deproteinized bovine bone mineral block and a combination of 50% autogenous bone (AB) and 50% deproteinized bovine bone mineral (DBBM) as grafting material for horizontal guided bone regeneration (GBR)., Materials and Methods: This randomized double-blind split-mouth clinical trial included 13 subjects requiring bilateral horizontal bone augmentation. Each patient received both treatment modalities: one side of the jaw was treated by GBR with the L-PRF and deproteinized bovine bone mineral block, and the other side with a 50/50 mixture of AB and DBBM. Cone beam computed tomography (CBCT) scans were used to evaluate horizontal bone width (HBW) and buccal bone thickness (BBT) at various time points: baseline (T0), immediately post-augmentation (T1), at implant placement (T2), and one year after abutment connection (T4). Bone sounding (BS) was also used to verify CBCT measurements., Results: No statistically significant differences were found in HBW gain between test (L-PRF) and control (AB/DBBM) sites at any timepoint. Both sites showed significant HBW loss post-implant placement, with more bone volume lost at higher crestal levels (Sh0 > Sh2 > Sh4). At the Sh2 level, 48.8% of the HBW gain at T1 was lost by T4 in test sites, and 46.2% in control sites. Similarly, BBT at Sh2 reduced from 4.7 ± 1.0 mm to 1.3 ± 1.5 mm in test sites and from 2.1 ± 1.0 mm to 0.9 ± 0.8 mm in control sites. Both groups of sites had one complication, resulting in a 91.6% success rate for both treatments. The cumulative survival rate of implants was 100% at 16 months, with a mean interproximal bone level (IBL) loss of 0.2 ± 0.9 mm and 0.1 ± 0.6 mm for test and control sites, respectively., Conclusions: No statistically significant differences were found between the AB/DBBM composite graft and the L-PRF and bovine bone mineral block for horizontal GBR. Significant resorption of grafted volume occurs within 25 months, continuing post-implant placement. Further research with larger sample sizes is needed to confirm these findings and optimize GBR techniques.

Bone augmentation using artificial bone is an important option in dental defect prostheses. A bone substitute using carbonate apatite (CO3Ap), an inorganic component of bone, was reported to have promising bone formation and bone replacement ability. However, the osteoinductivity of artificial bone is less than autogenous bone (AB). In this study, CO3Ap with AB is demonstrated as a clinically effective bone substitute. For in vitro experiments, an osteoclast-like cell (RAW-D) was cultured in the presence of AB, CO3Ap, or both (Mix), and the number of osteoclasts was evaluated. Osteoblasts were also cultured under the same conditions, and the number of adherent cells was evaluated. For in vivo experiments, a few holes were created in the rat tibia and AB, CO3Ap, or Mix were added. At 0, 14, and 21 days, the tissue morphology of the wound area was observed, and the thickness of the cortical bone was measured. In vitro, Mix did not increase the number of osteoclasts or osteoblasts. However, in vivo, the rate of bone replacement remarkably increased with Mix on dome-shape. A bone-grafting material combining osteoinductive AB with abundant artificial bone is expected to be clinically easy to use and able to form bone. [ABSTRACT FROM AUTHOR]

Objective: Autogenous bone grafts are considered the gold standard due to their compatibility and osteogenic potential to induce new bone formation through osteogenesis, osteoinduction, and osteoconduction. The aim of this paper was to describe clinical applications of the maxillary tuberosity block autograft in small and moderate localized defects of the alveolar process around implants and teeth. Clinical Considerations: Maxillary tuberosity is often used as a particulate graft for augmentation of deficient alveolar ridge or maxillary sinus prior to or simultaneously with implant insertion, but not as a bone block graft. The maxillary tuberosity block autograft may also provide a valuable bone source for challenging situations such as immediate implant placement into types II and III extraction sockets, treatment of horizontal and vertical bone defects with simultaneous implantation, reconstruction of circumferential defects around implants, and preservation of alveolar ridge. Conclusions: The advantages of the maxillary tuberosity include intraoral corticocancellous autogenous graft with fewer intraoperative difficulties, no need for donor site restoration, less morbidity, and an excellent correction of localized alveolar ridge defects. Clinical Significance: Within the limitations of the presented case reports, the use of maxillary tuberosity block autograft has shown to be successful in alveolar ridges augmentation that lack both width and height. [ABSTRACT FROM AUTHOR]

This systematic review aimed to evaluate computed tomographic scans for volumetric bone gain following lateral sinus floor augmentation of the atrophic posterior maxilla after the use of various bone-grafting materials. The databases MEDLINE, EMBASE, CINAHL, Cochrane Central Registry of Controlled Trials (CENTRAL), and SCOPUS were used for a comprehensive search for all potentially eligible randomized controlled trials (RCTs), without language restrictions, from the beginning of each database until June 2021. The predictor variables for this review were autogenous bone (AB), allografts (AG), xenografts (XG), and alloplastic bone (AP), which were assessed individually and in combination with the inclusion of growth factors with XGs. The outcome variable was the graft volume on cone beam computerized tomographic (CBCT) scans. Seven RCTs with a short-term observation period were included. Topographical analyses of all graft materials identified a volumetric reduction at 6 months postgrafting, compared with values immediately after graft placement. The volumetric reduction occurred regardless of the type of bone-grafting material. The largest volumetric gain over baseline, pregraft values, was found in the AG+XG group. Autografts, the present gold standard bone graft, showed a high resorption rate and inferior volumetric increase when compared with alternative grafting combinations. AG and XG also showed a significant difference with less volumetric gain than AP and their combinations. No difference was detected between AP and AG+AP. However, there was significantly less volumetric gain for AP alone compared with AG+XG and XG-growth factor combinations. As a result, these findings suggest significant advantages to new bone formation using grafting materials in combination. To achieve a better understanding of topographical variables related to various grafting materials, more clinically focused RCTs, with sufficient statistical power to control for confounding factors, are needed. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate long-term survival rates and radiographic stability of sinus floor elevations carried out using a two-layer grafting technique. Materials and Methods: Records were analyzed for patients treated with sinus floor elevations using a modified technique. Phycogenic hydroxyapatite (Algipore, Dentsply Sirona Implants) and autogenous bone particles harvested from intraoral sites were grafted in two distinct layers after elevation of the sinus mucosae. In this approach, the basal part of the sinus floor is grafted with autogenous bone, while the cranial part is grafted with the phycogenic hydroxyapatite. In some cases, implants were placed simultaneously, such that the entire surface of each implant was covered by autogenous bone particles. A titanium membrane was used to close the sinus window, and the implants were loaded 3 months later. In two-stage approaches, the implants were inserted 3 to 4 months after the grafting and loaded after 3 additional months. Panoramic radiographs were taken after the grafting procedure, after implant insertion, after the prosthetic restoration, and then annually for 10 years. These radiographs were used to measure the height between the implant shoulders and the top of the graft. Results: Of the 214 sinus floor elevations performed on 129 patients using the bilayering technique, 198 procedures in 118 patients were included in the study (136 one-stage and 62 two-stage). Membrane perforations during surgery occurred in 17.9% of the procedures and were sutured and sealed with fibrin glue. A total of 487 implants were placed in the grafted areas. No severe postoperative complications occurred, but three implants were lost throughout the 10-year follow-up period. A small decrease of vertical height was observed between the grafting surgery and the stage-two surgery (mean: 1.8 mm). After that, no bone height was lost over the 10 years. Conclusion: The layer grafting technique in combination with sinus floor elevation resulted in radiographically stable vertical bone height for 10 years. This technique enabled early placement and loading of implants in the grafted areas. The survival rate obtained with this procedure is similar to that expected for implants placed in nongrafted areas. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to compare the complication rates of recipient sites prepared using two incision techniques: crestal and tunnel. Materials and Methods: In this prospective study, patients underwent augmentation procedures (68 patients; 75 sites) by the same surgeon that were performed consecutively using the crestal incision technique (27 horizontal, 10 vertical; crestal group) or the tunnel incision technique (27 horizontal, 11 vertical; tunnel group). Autogenous bone block grafts were harvested with a piezoelectric surgical device, and the grafts were fixed at the recipient sites by two titanium screws in both groups. The authors evaluated minor exposure, transient paresthesia, major exposure, permanent paresthesia, gingival recession at adjacent teeth, surgery time, and visual analog scale pain scores. Results: Soft tissue dehiscence and graft failure were significantly lower in patients undergoing the tunnel technique. Conclusion: The tunnel incision technique significantly decreased soft tissue exposure, the most common complication of augmentation procedures with autogenous onlay bone grafts. This technique should be considered an alternative to the crestal incision technique for preparation of the recipient site. [ABSTRACT FROM AUTHOR]

Purpose: The objective of this retrospective study was to evaluate the long-term clinical outcomes of bone regeneration procedures using algae-derived plant hydroxyapatite (Algipore® FRIOS®) compared with demineralized anorganic bovine bone (Bio-Oss®), in combination with autologous blood-derived PRP. Materials and Methods: Partially edentulous patients with severe atrophy of posterior maxillary treated by means of the split bone technique in a two-stage grafting procedures were observed for up to seven years after implants placement. After surgeries, the natural porous fluorohydroxyapatite (FHA) (Algipore® FRIOS®; Group, n = 29) or anorganic bovine bone (Bio-Oss® Group, n = 28) with autogenous bone in a 50:50 composite ratio with PRP, were administered in a 2.8-mm critical-size defect (CSD). Four months later, implants were placed at second-stage surgery. Results: A sample of fifty-seven consecutive patients who required sinus augmentation was included in the study, and 57 implants were placed. There was no drop out or loss of follow-up of any case. Clinical and radiographic examinations revealed a comparable pattern of newly formed bone in both groups after seven years of functional loading for implants placed after sinus augmentation using porous fluorohydroxyapatite and anorganic bovine bone. No significant difference in marginal bone loss was found around implants in both groups. Conclusions: The favorable implant outcomes suggest both biomaterials are suitable for sinus grafting in severely atrophic maxillae. [ABSTRACT FROM AUTHOR]

Abstract Background Revision ankle-fusion surgery after a failure of total ankle arthroplasty has a problem with bone-defect management by implant removal. For the reconstruction of bone defects, autogenous bone often causes minor and major complications. Recombinant human-bone morphogenetic protein-2 (rhBMP-2) plays essential roles in bone regeneration strategies, and hydroxyapatite (HA) is beneficial as the rhBMP-2 carrier. In this study, we evaluate whether rhBMP-2/HA can replace autogenous bone in a rabbit ankle-fusion model with distal tibia bone defect. Methods The bone defect was created in the distal tibia. The ankle fusion was performed by a cannulated screw from lateral malleolus and various treatments on bone defect. Thirty male white New Zealand rabbits were divided into three groups of 10 animals on each group dependent on treatment methods as control group (no treatment into defect), auto-bone group (autogenous bone treatment), and rhBMP-2/HA group (40 μL of 1 μg/mL rhBMP-2/100 μL HA). Bone formation on defect and the union of the ankle joint were evaluated by X-ray, micro-CT, and histological analysis at 8 weeks and 12 weeks, postoperatively. Results Radiographic assessment found the control and auto-bone groups still had the bone defect present, but rhBMP-2/HA group showed complete replacement of the defect with newly formed bone at 12 weeks. Micro-CT showed significantly higher new bone formation within the defect in the rhBMP-2/HA group than in the auto-bone and control groups at 8 weeks (p > 0.05 and p < 0.01, respectively) and 12 weeks (p < 0.05, p < 0.001, respectively). Fusion rate (%) analysis of micro-CT showed a higher percentage of union in the rhBMP-2/HA group than in the auto bone and control groups at 8 weeks (p > 0.05, p < 0.001, respectively) and 12 weeks (p < 0.001 and p < 0.001, respectively). The histological showed the highest osteointegration between distal tibia and talus in the rhBMP-2/HA group at 12 weeks. Conclusions This study indicated that rhBMP-2/HA showed much better bone fusion than did the autogenous bone graft and was effective in promoting fusion rate and improving the quality of the ankle joint fusion.

The study aimed to assess the distribution of periimplant augmentation techniques and graft materials in relation to demographic factors and local parameters. Materials and method. In a study group of 100 edentulous patients candidate to dental implants it was investigated the share of bone augmentation techniques and graft materials in relation to age groups, edentation localization (maxillary vs mandibular; dental groups); alveolar bone resorption degree. Results. GBR technique was mostly used with highest shares as follows: 92,3% for maxillary implant sites in age group 50-59, 78,3% for maxillary implant sites in areas of molars and premolars, all implant sites Misch class B. Conclusions. Traditional GBR was the most used addition technique, followed by SGBR and block transplant for all age groups, localization and alveolar bone resorption degrees. Xenografts were the most used augmentation materials for all categories of alveolar bone resorption.

Abstract Aim To study the influence on the healing of the placement of particulate autogenous bone in the antrostomy and in the subjacent region after maxillary sinus elevation. Material and methods Sixteen New Zealand rabbits were undergone to bilateral maxillary sinus floor augmentation with 4 × 4 mm antrostomy dimension. The sinus mucosa was elevated, and the space obtained was filled with xenograft. In the test site (treated sites), autogenous bone was harvested from the tibia and was placed either in the antrostomy and the subjacent region while the control site was left untreated. Antrostomy was covered bilaterally with collagen membranes. Animals were euthanized after 1 and 8 weeks of healing, with 8 rabbits in each group. Histomorphometric evaluations were done. The Wilcoxon test is used for statistical analysis, for a 5% statistical significance. Results After 1 week of healing, the new bone proportion in the antrostomy was 7.7 ± 11.2% and 6.1 ± 6.4% in the treated and untreated sites, respectively. In the subjacent region (close-to-window region), hardly any new bone was assessed. In the elevated region, 2.7–2.8% of total new bone was found in both sites. In the antrostomy region, after 8 weeks of healing, 35.5 ± 20.9% of new bone in the treated sites, and 28.6 ± 24.1% in the untreated sites was observed (p = 0.499). In the close-to-window region, the respective proportions were 25.8 ± 16.1% and 17.6 ± 16.3% (p = 0.018). In the elevated region, the total new bone reached fractions of 27.9 ± 12.9% and 23.6 ± 15.2% in the treated and untreated sites, respectively (p = 0.128). Conclusions The placement of autogenous bone in the antrostomy and the subjacent region after maxillary sinus elevation, slightly enhanced bone formation compared with sites only grafted with xenograft. Though, only the subjacent close-to-window region showed a statistical significance at 8 weeks of healing. Despite the limitations of the present study, due to its preclinical nature, findings should be extrapolated to humans with caution.

To enhance bone regeneration, the use of bone morphogenetic protein (BMP)-2 is an attractive option. Unfortunately, the dose-dependent side effects prevent its widespread use. Therefore, a novel osteogenic agent using a different mechanism of action than BMP-2 is highly desirable. Previous reports demonstrated that prostaglandin E2 receptor 4 (EP4) agonists have potent osteogenic effects on non-human cells and are one of the potential alternatives for BMP-2. Here, we investigated the effects of an EP4 agonist (AKDS001) on human cells with a rat heterotopic xenograft model of human bone. Bone formation in the xenograft model was significantly enhanced by AKDS001 treatment. Histomorphometric analysis showed that the mode of bone formation by AKDS001 was minimodeling rather than remodeling. In cultured human mesenchymal stem cells, AKDS001 enhanced osteogenic differentiation and mineralization via the cAMP/PKA pathway. In cultured human preosteoclasts, AKDS001 suppressed bone resorption by inhibiting differentiation into mature osteoclasts. Thus, we conclude that AKDS001 can enhance bone formation in grafted autogenous bone by minimodeling while maintaining the volume of grafted bone. The combined use of an EP4 agonist and autogenous bone grafting may be a novel treatment option to enhance bone regeneration. However, we should be careful in interpreting the results because male xenografts were implanted in male rats in the present study. It remains to be seen whether females can benefit from the positive effects of AKDS001 MS by using female xenografts implanted in female rats in clinically relevant animal models.

Background: Clinicians are often faced with changes in socket anatomy after tooth extraction. Extraction socket management can be challenging, particularly in the aesthetic zone. Before an implant-based treatment can be proposed, a detailed diagnosis of the defect type must be made and a treatment plan developed accordingly to ensure the long-term stability of peri-implant tissues., Materials and Methods: The present authors developed a new extraction socket classification and associated recommendations for planning and execution of immediate dentoalveolar restoration., Results: The classification is based on six criteria: the bony anatomy of the 360-degree socket, socket health, facial gingival recession, periodontal biotype, bone density and apical height of the remaining bone. These criteria guide immediate dentoalveolar restoration planning so an optimal peri-implant tissue structure and aesthetic outcome can be achieved, and enabled long-term resolution in a complex clinical case., Conclusions: When planning post-extraction treatment that is effective and predictable in the long term, 360-degree anatomical classification of the extraction socket must be performed to ensure that the treatment is proportional to the socket and surrounding soft tissue damage., Conflict-Of-Interest Statement: The authors declare there are no conflicts of interest relating to this study.

BACKGROUND: At present, it is considered that the volume of intervertebral bone graft is one of the factors affecting the intervertebral fusion rate, but the same volume of intervertebral bone graft leads to different release area of intervertebral bone graft and endplate due to individual differences, and the impact of release area of intervertebral bone graft and endplate on the intervertebral fusion rate is rarely analyzed. OBJECTIVE: To investigate the effect of area ratio of interbody autograft on intervertebral fusion rate during posterior lumbar interbody fusion. METHODS: Clinical data of 93 patients who underwent posterior lumbar interbody fusion in Department of Spinal Surgery, Affiliated Hospital of Southwest Medical University from January 2017 to December 2018 were retrospectively analyzed. The preoperative intervertebral space height, upper and lower endplate area, Oswestry disability index and visual analogue scale score, Cage size and the amount of autologous bone, and area of autologous bone graft (the area of autologous bone contacting the upper and lower endplates) were recorded, and the average value was calculated. According to the percentage of autogenous bone graft area in the total endplate area measured one week after operation, they were divided into group A (area ratio of interbody autograft < 16%), group B (16% ≤ area ratio of interbody autograft ≤ 24%) and group C (area ratio of interbody autograft > 24%). X-ray and CT examinations were performed at 6 and 12 months and the last follow-up. The direction of cage placement was observed in the three groups. The height of intervertebral space, the area ratio of intervertebral autograft bone graft, brantigan score, Oswestry disability index and visual analogue scale score were recorded at the follow-up. The measurement was performed by two spine surgeons, and repeated at an interval of one week to test inter observer and intra observer reliability. The effect of the area of autologous bone graft on the intervertebral fusion rate was compared and analyzed. RESULTS AND CONCLUSION: (1) The inter observer and intra observer reliabilities were 0.924 and 0.913, respectively. (2) All patients were followed up for more than 12 months. There were no significant differences in age, gender and surgical segment among the three groups (P > 0.05). There were no significant differences in preoperative intervertebral height, Oswestry disability index and visual analogue scale score among the three groups (P > 0.05). (3) There were 27 cases in group A, including 26 cases of oblique placement and 1 case of transverse placement, 32 cases in group B, including 2 cases of oblique placement and 30 cases of transverse placement, 34 cases in group C, 1 case of oblique placement and 33 cases of transverse placement. (4) There was no significant difference in the amount of intraoperative autologous bone extraction among the three groups (P > 0.05), and the average height of intervertebral space in group A was higher than that in group B and group C one week after operation (P=0.022, P=0.00). The area of autogenous bone graft in group A was smaller than that in group B and group C (P=0.000, P=0.000). (5) At 6 and 12 months after operation, the fusion rate in group A (70.4%, 88.9%) was lower than that in group B (84.4%, 100%) and group C (88.2%, 100%), and the Brantigan score in group A was lower than that in group B (P=0.027, P=0.020) and group C (P=0.018, P=0.001). (6) At the last follow-up, there was no significant difference in Oswestry disability index and visual analogue scale score among the three groups (P > 0.314). The height loss of intervertebral space in group A was greater than that in group B and group C (P=0.007, P=0.013). The increased area of intervertebral fusion in group A was lower than that in group B and group C (P=0.003, P=0.000). There was no significant difference in fusion rate and Brantigan score among groups A, B and C (P=0.902, P=0.712). (7) It is suggested that the percentage of an area ratio of interbody autograft in the total endplate area greater than or equal to 16% can effectively improve the interbody fusion rate and reduce the risk of late intervertebral space collapse. [ABSTRACT FROM AUTHOR]

Purpose: To compare volumetric changes after sinus augmentation of completely edentulous maxillae with either autogenous or allogeneic fresh-frozen bone particles. Materials and Methods: This split-mouth study in patients who required bilateral sinus grafting used autograft particles for one sinus and allograft particles for the contralateral sinus. The grafted sinuses were left to heal for 6 months prior to implant insertion. All patients underwent four computed tomography scans: prior to augmentation and 1 week, 6 months, and 12 months after grafting. Computer software was used to analyze bone graft volume in each scan. Results: Fifteen patients (8 men, 1 women) with a mean age of 54 ± 5 years (range, 48 to 60 years) took part and underwent 30 sinus augmentation procedures. Mean autograft and allograft volumes were not statistically significantly different at each time point (1 week: 2.01 ± 0.43 cm³; vs 2.46 ± 0.79 cm³; 6 months: 1.53 ± 0.49 cm³ vs 1.75 ± 0.64 cm#179;; and 12 months: 1.38 ± 0.43 cm#179; vs 1.59 ± 0.56 cm#179;, respectively). Mean volumetric reductions of 31.35% and 35.36% (23.9% and 29.9% in the 6 months prior to implant insertion, followed by an additional 9% and 9% in the following 6 months), relative to 1 week postgrafting, were noted for the autograft and allograft groups, respectively, after 12 months. Conclusion: On the basis of this split-mouth study of 15 patients, there was no statistically significant volumetric difference after 12 months between the use of autograft or allografts for sinus augmentation. Fresh-frozen bone allograft may serve as an alternative that avoids the morbidity associated with autograft harvesting. [ABSTRACT FROM AUTHOR]

Copyright of Implantologie is the property of Quintessenz Verlags GmbH and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: To compare the outcome after extensive lateral guided bone regeneration using deproteinized bovine bone mineral (DBBM) with or without autogenous bone chips in a canine model of chronic horizontal alveolar ridge defect. Materials and Methods: The second, third and fourth lower premolars of both sides were extracted, and the buccal bone walls were completely removed in five beagle dogs. After 4 weeks, DBBM particles mixed with autogenous bone chips at a ratio of 1:1 were grafted at one side (DBBM/Auto group), while DBBM particles alone were grafted at the contralateral side (DBBM group). The graft materials on both sides were covered by a resorbable collagen membrane and fixation pins. Microcomputed tomographic volume and histomorphometric analyses were performed at 16 weeks post‐surgery. Results: The ridges of both groups were recovered horizontally, but new bone formation beyond the original ridge contour at the defect site was not found. The DBBM group exhibited a larger total radiographic augmented volume and new bone volume compared with the DBBM/Auto group, but the differences were minimal (p >.05). Histologically, the regenerated area and new bone area were also slightly larger without any statistical significance in the DBBM group than in the DBBM/Auto group (p >.05). Conclusion: The addition of autogenous bone chips to DBBM for lateral ridge augmentation may confer no advantage over grafting DBBM alone with respect to both space maintenance and de novo bone formation in dogs. [ABSTRACT FROM AUTHOR]

In the case of multiple hopeless teeth and severe bone loss, a conventional healing protocol of 3–4 months has been recommended to prevent the possibility of infection or unpredictable resorption of grafted bone during consolidation of the extraction socket. The use of a provisional denture is inevitable in the case of delayed implant placement, which is a common risk factor for wound dehiscence after a bone graft. Although autogenous bone is still the gold standard for bone grafting because of its excellent biocompatibility and osteogenic potential, there has been controversy in the unpredictable resorption of autogenous bone grafting. We present a case of successful maxillary rehabilitation without the use of provisional dentures by immediate implant placement, with early loading accompanying an extensive autogenous bone graft. [ABSTRACT FROM AUTHOR]

he use of dental implants to improve functional and esthetic demands of dentition has increased significantly over the past two decades. Soft and hard tissue management is one of the factors contributing to improved esthetic results. This report describes the correction of an esthetic problem in a single implant combined connective tissue graft and autogenous bone graft. Four months after the surgical procedure, it could be observed that the combination of connective tissue graft and autogenous bone graft resulted in the augmentation of hard and soft tissue in the peri-implant area with favorable esthetic outcomes. [ABSTRACT FROM AUTHOR]

Objectives: To compare the effectiveness of onlay bone blocks of equine origin (test or XB group) with autogenous bone blocks (control or AB group) harvested from the ramus or the iliac crest for the rehabilitation of partially or fully edentulous atrophic jaws with implant supported prostheses. Materials and methods: Forty patients with partially or fully edentulous atrophic jaws having less than 5 mm of residual crestal bone height and/or less than 3 mm of bone thickness, as measured on computerised tomography (CT) scans, were randomised into two groups according to a parallel group design, either to be augmented with autogenous onlay bone blocks (20 patients; AB group) from the mandibular ramus or the iliac crest, or with onlays blocks of spongious bone of equine origin (20 patients; XB group). Two centres treated 20 patients each. Six XB blocks were modelled on lithographic models of the jaws before grafting. The blocks were fixed with screws and osteosynthesis plates and were covered with resorbable barriers made of equine cortical bone and fixed with tacks. The autogenous bone grafts were left to heal for 4 months and the xenografts for 7 months before placing implants, which were submerged. After 4 months, either bar-retained overdentures or provisional reinforced acrylic prostheses were delivered. Provisional prostheses were replaced, after 4 months, by definitive fixed prostheses. Outcome measures were: prosthesis and implant failures; complications; patient satisfaction; pain recorded 3 and 10 days post-augmentation; number of days of hospitalisation, total and partial infirmity days. All patients were followed for 4 months after loading. Results: All patients could be rehabilitated with implant-supported prostheses and none dropped out. Twenty-eight patients were augmented in the maxilla (15 with AB and 13 with XB) and 12 in the mandible (5 with AB and 7 with XB). No AB graft failed totally versus 10 XB grafts (difference = 0.5; 95% CI 0.23 to 0.68; P = 0.0004). In particular, all 7 XB mandibular grafts and 5 out of 6 XB blocks (3 in mandibles and 2 in maxillas), which were previously modelled on lithographic models of the jaws failed. One implant failed in one AB patient versus 11 implants in 4 XB patients (P = 0.3416). All but 1 prostheses were loaded in time in the AB patients, versus 4 prostheses which were loaded with delays in XB patients because of graft and implant failures (P = 0.3416). Four complications occurred in 4 AB patients versus 15 complications in 12 XB patients (difference = 0.4; 95% CI 0.09 to 0.63; P = 0.0225). Fourteen AB patients reported moderate pain 3 days postoperatively versus 6 XB patients (P = 0.0562); at 10 days, 10 AB patients reported moderate pain versus 1 XB patient (difference = -0.45; 95% CI -0.65 to -0.17; P = 0.0033). The 14 patients harvested from the iliac crest were hospitalised for an average of 3.1 nights, whereas 7 patients treated with XB were hospitalised on average for 1.4 nights (P <0.0001). The number of total and partial infirmity days was 126 for the AB group and 43 for the XB group, and 220 for the AB group and 93 for the XB group, respectively (mean day difference = -4.15; 95% CI -7.35 to -0.95; P = 0.0134 and mean day difference = -5.7; 95% CI -10.01 to -1.39; P = 0.0116, respectively). Seventeen AB patients versus 19 XB patients were fully satisfied with function of their prostheses (P = 0.6050), 18 AB patients versus 12 XB patients were fully satisfied with aesthetics of their prostheses (P = 0.0648), and 5 and 3 patients, respectively would not undergo the same procedure again (P = 0.6948). There were no differences between the outcomes of the two centres with exception of prosthesis failures and complications in the maxilla. Conclusions: Autogenous onlay bone blocks are superior to equine onlay bone blocks, especially in mandibles, where all equine blocks failed, therefore we strongly discourage the use of onlay bone blocks of equine origin in mandibles. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate the feasibility of a newly proposed minimally invasive split-thickness flap design without vertical-releasing incisions for vertical bone regeneration performed in either a simultaneous or staged approach and to analyze the prevalence of adverse events during postoperative healing. Materials and methods: Following preparation of a split-thickness flap and bilaminar elevation of the mucosa and underlying periosteum, the alveolar bone was exposed over the defects, vertical GBR was performed by means of a titanium-reinforced high-density polytetrafluoroethylene membrane combined with particulated autogenous bone (AP) and bovine-derived xenograft (BDX) in 1:1 ratio. At 9 months after reconstructive surgery, vertical and horizontal hard tissue gain was evaluated based on clinical and radiographic examination. Results: Twenty-four vertical alveolar ridge defects in 19 patients were treated with vertical GBR. In case of 6 surgical sites, implant placement was performed at the time of the GBR (simultaneous group); in the remaining 18 surgical, sites implant placement was performed 9 months after the ridge augmentation (staged group). After uneventful healing in 23 cases, hard tissue fill was detected in each site. Direct clinical measurements confirmed vertical and horizontal hard tissue gain averaging 3.2 ± 1.9 mm and 6.5 ± 0.5 mm respectively, in the simultaneous group and 4.5 ± 2.2 mm and 8.7 ± 2.3 mm respectively, in the staged group. Additional radiographic evaluation based on CBCT data sets in the staged group revealed mean vertical and horizontal hard tissue fill of 4.2 ± 2.0 mm and 8.5 ± 2.4 mm. Radiographic volume gain was 1.1 ± 0.4 cm3. Conclusion: Vertical GBR consisting of a split-thickness flap and using titanium-reinforced non-resorbable membrane in conjunction with a 1:1 mixture of AP+BDX may lead to a predictable vertical and horizontal hard tissue reconstruction. Clinical relevance: The used split-thickness flap design may represent a valuable approach to increase the success rate of vertical GBR, resulting in predicable hard tissue regeneration, and favorable wound healing with low rate of membrane exposure. [ABSTRACT FROM AUTHOR]

Objectives: To present the results of guided bone regeneration (GBR) of atrophic edentulous ridges with customized CAD/CAM titanium meshes. Material and methods: Forty‐one patients, presenting with 53 atrophic sites, were enrolled between 2018 and 2019. GBR was obtained with titanium meshes filled with autogenous bone chips and bovine bone mineral (BBM). After a mean of 7 months (range: 5–12 months), meshes were removed and 106 implants placed. After a mean of 3.5 months (range: 2–5 months), implants were uncovered and prosthetic restorations started. The outcomes were vertical and horizontal bone augmentation changes, biological complications and implant survival. Results: Out of 53 sites, 11 underwent mesh exposure: eight of them were followed by uneventful integration of the graft, while three by partial bone loss. The mean vertical and horizontal bone gain after reconstruction was 4.78 ± 1.88 mm (range 1.00–8.90 mm) and 6.35 ± 2.10 mm (range 2.14–11.48 mm), respectively. At the time of implant placement, mean changes of initial bone gain were −0.39 ± 0.64 mm (range −3.1 to + 0.80 mm) and −0.49 ± 0.83 mm (range –3.7 to +0.4 mm), in the vertical and horizontal dimensions, respectively. Reduction of bone volume was significantly higher (p <.001 for both dimensions) in the exposed sites. The mean follow‐up of implants after loading was 10.6 ± 6.5 months (range: 2–26 months). The survival rate of implants was 100%. Conclusion: Customized titanium meshes can represent a reliable tool for GBR of severely atrophic sites, with simplification of the surgical phases. [ABSTRACT FROM AUTHOR]

Aim of study. The study aims to determine if the type of graft materials influence the dental implants success rate in the proimplant surgical procedures used for the improvement of the bone support. Materials and method. The study group included 125 patients (65 females, 60 males, mean age 49.54 ± 11.387 years), selected from a private dental practice and from patients candidates to implantprosthetic therapy in Clinical Learning Base „M.Kogălniceanu” Iasi, of Faculty of Dental Medicine, U.M.F. „Grigore T.Popa” Iasi. All patients were diagnosed with extended partial edentation associated to atrophic alveolar bone and were firstly programmed for proimplant surgical procedures. Statistical analysis compared the group with favourable periimplant evolution with the group with peri-implant complications, and it was performed to evaluate the potential of each bone graft category to influence the success rate of the implant therapy. Results. Autogenous grafts were used more frequently in the patients group with positive evolution (10.0%) than in group with periimplant complications (7.6%), without significant statistical difference comparing to mixed grafts and xenografts. Conclusions. Regarding the predictability of the dental implants success rates, autogenous grafts offer an additional protection and higher success rate of dental implants comparing to xenografts or mixed grafts.