Search

Large language models (LLMs) hold significant promise in advancing network management and orchestration in 6G and beyond networks. However, existing LLMs are limited in domain-specific knowledge and their ability to handle multi-modal sensory data, which is critical for real-time situational awareness in dynamic wireless environments. This paper addresses this gap by introducing ENWAR, an ENvironment-aWARe retrieval augmented generation-empowered multi-modal LLM framework. ENWAR seamlessly integrates multi-modal sensory inputs to perceive, interpret, and cognitively process complex wireless environments to provide human-interpretable situational awareness. ENWAR is evaluated on the GPS, LiDAR, and camera modality combinations of DeepSense6G dataset with state-of-the-art LLMs such as Mistral-7b/8x7b and LLaMa3.1-8/70/405b. Compared to general and often superficial environmental descriptions of these vanilla LLMs, ENWAR delivers richer spatial analysis, accurately identifies positions, analyzes obstacles, and assesses line-of-sight between vehicles. Results show that ENWAR achieves key performance indicators of up to 70% relevancy, 55% context recall, 80% correctness, and 86% faithfulness, demonstrating its efficacy in multi-modal perception and interpretation.

Next-generation wireless networks strive for higher communication rates, ultra-low latency, seamless connectivity, and high-resolution sensing capabilities. To meet these demands, terahertz (THz)-band signal processing is envisioned as a key technology offering wide bandwidth and sub-millimeter wavelength. Furthermore, THz integrated sensing and communications (ISAC) paradigm has emerged jointly access spectrum and reduced hardware costs through a unified platform. To address the challenges in THz propagation, THz-ISAC systems employ extremely large antenna arrays to improve the beamforming gain for communications with high data rates and sensing with high resolution. However, the cost and power consumption of implementing fully digital beamformers are prohibitive. While hybrid analog/digital beamforming can be a potential solution, the use of subcarrier-independent analog beamformers leads to the beam-squint phenomenon where different subcarriers observe distinct directions because of adopting the same analog beamformer across all subcarriers. In this paper, we develop a sparse array architecture for THz-ISAC with hybrid beamforming to provide a cost-effective solution. We analyze the antenna selection problem under beam-squint influence and introduce a manifold optimization approach for hybrid beamforming design. To reduce computational and memory costs, we propose novel algorithms leveraging grouped subarrays, quantized performance metrics, and sequential optimization. These approaches yield a significant reduction in the number of possible subarray configurations, which enables us to devise a neural network with classification model to accurately perform antenna selection., Comment: 14pages10figures, submitted to IEEE

As the demand for wireless connectivity continues to soar, the fifth generation and beyond wireless networks are exploring new ways to efficiently utilize the wireless spectrum and reduce hardware costs. One such approach is the integration of sensing and communications (ISAC) paradigms to jointly access the spectrum. Recent ISAC studies have focused on upper millimeter-wave and low terahertz bands to exploit ultrawide bandwidths. At these frequencies, hybrid beamformers that employ fewer radio-frequency chains are employed to offset expensive hardware but at the cost of lower multiplexing gains. Wideband hybrid beamforming also suffers from the beam-split effect arising from the subcarrier-independent (SI) analog beamformers. To overcome these limitations, this paper introduces a spatial path index modulation (SPIM) ISAC architecture, which transmits additional information bits via modulating the spatial paths between the base station and communications users. We design the SPIM-ISAC beamformers by first estimating both radar and communications parameters by developing beam-split-aware algorithms. Then, we propose to employ a family of hybrid beamforming techniques such as hybrid, SI, and subcarrier-dependent analog-only, and beam-split-aware beamformers. Numerical experiments demonstrate that the proposed SPIM-ISAC approach exhibits significantly improved spectral efficiency performance in the presence of beam-split than that of even fully digital non-SPIM beamformers., Comment: Accepted Paper in IEEE Transactions on Wireless Communications

This paper introduces a reconfigurable intelligent surface (RIS)-assisted grant-free non-orthogonal multiple-access (GF-NOMA) scheme. To ensure the power reception disparity required by the power domain NOMA (PD-NOMA), we propose a joint user clustering and RIS assignment/alignment approach that maximizes the network sum rate by judiciously pairing user equipments (UEs) with distinct channel gains, assigning RISs to proper clusters, and aligning RIS phase shifts to the cluster members yielding the highest cluster sum rate. Once UEs are acknowledged with the cluster index, they are allowed to access their resource blocks (RBs) at any time requiring neither further grant acquisitions from the base station (BS) nor power control as all UEs are requested to transmit at the same power. In this way, the proposed approach performs an implicit over-the-air power control with minimal control signaling between BS and UEs, which has shown to deliver up to 20% higher network sum rate than benchmark GF-NOMA and optimal grant-based PD-NOMA schemes depending on the network parameters. The given numerical results also investigate the impact of UE density, RIS deployment, and RIS hardware specifications on the overall performance of the proposed RIS-aided GF-NOMA scheme.

We consider the problem of efficient ultra-massive multiple-input multiple-output (UM-MIMO) data detection in terahertz (THz)-band non-orthogonal multiple access (NOMA) systems. We argue that the most common THz NOMA configuration is power-domain superposition coding over quasi-optical doubly-massive MIMO channels. We propose spatial tuning techniques that modify antenna subarray arrangements to enhance channel conditions. Towards recovering the superposed data at the receiver side, we propose a family of data detectors based on low-complexity channel matrix puncturing, in which higher-order detectors are dynamically formed from lower-order component detectors. We first detail the proposed solutions for the case of superposition coding of multiple streams in point-to-point THz MIMO links. We then extend the study to multi-user NOMA, in which randomly distributed users get grouped into narrow cell sectors and are allocated different power levels depending on their proximity to the base station. We show that successive interference cancellation is carried with minimal performance and complexity costs under spatial tuning. We derive approximate bit error rate (BER) equations, and we propose an architectural design to illustrate complexity reductions. Under typical THz conditions, channel puncturing introduces more than an order of magnitude reduction in BER at high signal-to-noise ratios while reducing complexity by approximately 90%.

Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems typically employ hybrid mixed signal processing to avoid expensive hardware and high training overheads. {However, the lack of fully digital beamforming at mmWave bands imposes additional challenges in channel estimation. Prior art on hybrid architectures has mainly focused on greedy optimization algorithms to estimate frequency-flat narrowband mmWave channels, despite the fact that in practice, the large bandwidth associated with mmWave channels results in frequency-selective channels. In this paper, we consider a frequency-selective wideband mmWave system and propose two deep learning (DL) compressive sensing (CS) based algorithms for channel estimation.} The proposed algorithms learn critical apriori information from training data to provide highly accurate channel estimates with low training overhead. In the first approach, a DL-CS based algorithm simultaneously estimates the channel supports in the frequency domain, which are then used for channel reconstruction. The second approach exploits the estimated supports to apply a low-complexity multi-resolution fine-tuning method to further enhance the estimation performance. Simulation results demonstrate that the proposed DL-based schemes significantly outperform conventional orthogonal matching pursuit (OMP) techniques in terms of the normalized mean-squared error (NMSE), computational complexity, and spectral efficiency, particularly in the low signal-to-noise ratio regime. When compared to OMP approaches that achieve an NMSE gap of \$\unit[\{4-10\}]{dB}\$ with respect to the Cramer Rao Lower Bound (CRLB), the proposed algorithms reduce the CRLB gap to only \$\unit[\{1-1.5\}]{dB}\$, while significantly reducing complexity by two orders of magnitude., Comment: 16 pages, 8 figures, submitted to IEEE transactions on wireless communications. arXiv admin note: text overlap with arXiv:1704.08572 by other authors

Cell-free massive MIMO communications is an emerging network technology for 5G wireless communications wherein distributed multi-antenna access points (APs) serve many users simultaneously. Most prior work on cell-free massive MIMO systems assume time-division duplexing mode, although frequency-division duplexing (FDD) systems dominate current wireless standards. The key challenges in FDD massive MIMO systems are channel-state information (CSI) acquisition and feedback overhead. To address these challenges, we exploit the so-called angle reciprocity of multipath components in the uplink and downlink, so that the required CSI acquisition overhead scales only with the number of served users, and not the number of AP antennas nor APs. We propose a low complexity multipath component estimation technique and present linear angle-of-arrival (AoA)-based beamforming/combining schemes for FDD-based cell-free massive MIMO systems. We analyze the performance of these schemes by deriving closed-form expressions for the mean-square-error of the estimated multipath components, as well as expressions for the uplink and downlink spectral efficiency. Using semi-definite programming, we solve a max-min power allocation problem that maximizes the minimum user rate under per-user power constraints. Furthermore, we present a user-centric (UC) AP selection scheme in which each user chooses a subset of APs to improve the overall energy efficiency of the system. Simulation results demonstrate that the proposed multipath component estimation technique outperforms conventional subspace-based and gradient-descent based techniques. We also show that the proposed beamforming and combining techniques along with the proposed power control scheme substantially enhance the spectral and energy efficiencies with an adequate number of antennas at the APs.

Device-to-Device (D2D) communications underlaying cellular networks is a viable network technology that can potentially increase spectral utilization and improve power efficiency for proximitybased wireless applications and services. However, a major challenge in such deployment scenarios is the interference caused by D2D links when sharing the same resources with cellular users. In this work, we propose a channel allocation (CA) scheme together with a set of three power control (PC) schemes to mitigate interference in a D2D underlaid cellular system modeled as a random network using the mathematical tool of stochastic geometry. The novel aspect of the proposed CA scheme is that it enables D2D links to share resources with multiple cellular users as opposed to one as previously considered in the literature. Moreover, the accompanying distributed PC schemes further manage interference during link establishment and maintenance. The first two PC schemes compensate for large-scale path-loss effects and maximize the D2D sum rate by employing distance-dependent pathloss parameters of the D2D link and the base station, including an error estimation margin. The third scheme is an adaptive PC scheme based on a variable target signal-to-interference-plus-noise ratio, which limits the interference caused by D2D users and provides sufficient coverage probability for cellular users. Closed-form expressions for the coverage probability of cellular links, D2D links, and sum rate of D2D links are derived in terms of the allocated power, density of D2D links, and path-loss exponent. The impact of these key system parameters on network performance is analyzed and compared with previous work. Simulation results demonstrate an enhancement in cellular and D2D coverage probabilities, and an increase in spectral and power efficiency., Comment: 35 pages