Search

Antarctica has often been perceived as a pristine continent until the recent few decades as pollutants have been observed accruing in the Antarctic environment. Irresponsible human activities such as accidental oil spills, waste incineration and sewage disposal are among the primary anthropogenic sources of heavy metal contaminants in Antarctica. Natural sources including animal excrement, volcanism and geological weathering also contribute to the increase of heavy metals in the ecosystem. A microbial growth model is presented for the growth of a bacterial cell consortium used in the biodegradation of phenol in media containing different metal ions, namely arsenic (As), cadmium (Cd), aluminium (Al), nickel (Ni), silver (Ag), lead (Pb) and cobalt (Co). Bacterial growth was inhibited by these ions in the rank order of Al < As < Co < Pb < Ni < Cd < Ag. Greatest bacterial growth occurred in 1 ppm Al achieving an OD600 of 0.985 and lowest in 1 ppm Ag with an OD600 of 0.090. At a concentration of 1.0 ppm, Ag had a considerable effect on the bacterial consortium, inhibiting the degradation of phenol, whereas this concentration of the other metal ions tested had no effect on degradation. The biokinetic growth model developed supports the suitability of the bacterial consortium for use in phenol degradation.

Agricultural sorbents have received attention for their effectiveness in oil removal. In Malaysia, oil palm’s empty fruit bunch (EFB) spikelets are an abundant agricultural waste that provides a non-toxic, renewable resource of cellulosic materials. In this study, the effectiveness of EFB spikelets to remove oil spills from seawater pollution in a filter system was investigated and the best optimisation approach for filtering conditions was determined. Experiments for oil spill clean-up were performed using a filter-based oil sorption system with a series of conditions such as temperature, time, packing density, and oil concentration to evaluate sorption capacity, oil and water absorbed efficiency. Fourier transform infrared spectroscopy (FTIR) was used to characterise the physicochemical properties of untreated and treated EFB fibres. Based on one-factor-at -a-time (OFAT) analysis conducted at 160 °C for 30 min on 0.1 g/cm3 of packing density containing 25% diesel, 8.667 mL of oil and 5 mL of water was absorbed. In response surface methodology (RSM), the three parameters of temperature, packing density and diesel concentration were observed as significant. From RSM fitting model analysis, the predicted value obtained for both oil and water absorbed were 8.805 and 5.213 mL, respectively. The experimental RSM values of 9 and 5 mL of oil and water absorbed were obtained. The result demonstrated the validity of the model as the experimental RSM values were close to the RSM model’s prediction. As compared to OFAT, the RSM method is more efficient in oil removal. This research contributes to a better knowledge of the usage of a natural sorbent as a method of diesel pollution remediation.

Oil pollution such as diesel poses a significant threat to the environment. Due to this, there is increasing interest in using natural materials mainly from agricultural waste as organic oil spill sorbents. Oil palm’s empty fruit bunch (EFB), a cost-effective material, non-toxic, renewable resource, and abundantly available in Malaysia, contains cellulosic materials that have been proven to show a good result in pollution treatment. This study evaluated the optimum screening part of EFB that efficiently absorbs oil and the physicochemical characterisation of untreated and treated EFB fibre using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The treatment conditions were optimised using one-factor-at-a-time (OFAT), which identified optimal treatment conditions of 170 °C, 20 min, 0.1 g/cm3, and 10% diesel, resulting in 23 mL of oil absorbed. The predicted model was highly significant in statistical Response Surface Methodology (RSM) and confirmed that all the parameters (temperature, time, packing density, and diesel concentration) significantly influenced the oil absorbed. The predicted values in RSM were 175 °C, 22.5 min, 0.095 g/cm3, and 10%, which resulted in 24 mL of oil absorbed. Using the experimental values generated by RSM, 175 °C, 22.5 min, 0.095 g/cm3, and 10%, the highest oil absorption achieved was 24.33 mL. This study provides further evidence, as the data suggested that RSM provided a better approach to obtain a high efficiency of oil absorbed.

Heavy metal contamination is accidentally becoming prevalent in Antarctica, one of the world’s most pristine regions. Anthropogenic as well as natural causes can result in heavy metal contamination. Each heavy metal has a different toxic effect on various microorganisms and species, which can interfere with other pollutant bioremediation processes. This study focused on the effect of co-contaminant heavy metals on waste canola oil (WCO) biodegradation by the BS14 bacterial community collected from Antarctic soil. The toxicity of different heavy metals in 1 ppm of concentration to the WCO-degrading bacteria was evaluated and further analyzed using half maximal inhibition concentration (IC50) and effective concentration (EC50) tests. The results obtained indicated that Ag and Hg significantly impeded bacterial growth and degradation of WCO, while interestingly, Cr, As, and Pb had the opposite effect. Meanwhile, Cd, Al, Zn, Ni, Co, and Cu only slightly inhibited the bacterial community in WCO biodegradation. The IC50 values of Ag and Hg for WCO degradation were found to be 0.47 and 0.54 ppm, respectively. Meanwhile, Cr, As, and Pb were well-tolerated and induced bacterial growth and WCO degradation, resulting in the EC50 values of 3.00, 23.80, and 28.98 ppm, respectively. The ability of the BS14 community to tolerate heavy metals while biodegrading WCO in low-temperature conditions was successfully confirmed, which is a crucial aspect in biodegrading oil due to the co-contamination of oil and heavy metals that can occur simultaneously, and at the same time it can be applied in heavy metal-contaminated areas.

Imperata cylindrica, often known as cogon grass, is a low-cost and useful sorbent for absorbing oil and optimising processes. The effects of temperature, time, packing density and oil concentration on oil absorption efficiency were investigated and optimised utilising one-factor-at-a-time (OFAT) and response surface methodology (RSM) approaches. Temperature and oil concentration are two important variables in the oil absorption process. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analysis were used to characterise cogon grass. After treatment and oil absorption, the FTIR method indicated new formation and deformation of functional groups, while SEM revealed changes in the surface and texture of cogon grass, including a roughened and jagged surface. Validation of the RSM model yielded 93.54% efficiency with 22.45 mL oil absorbed at 128 °C temperature and 36 (v/v)% oil concentration while keeping packing density and time constant at 30 min and 0.20 g/cm3, respectively. This study may provide an insight into the usefulness of a statistical approach to maximise the oil absorption of cogon grass as an oil sorbent.

Oil spill incidents are hazardous and have prolonged damage to the marine environment. Management and spill clean-up procedures are practical and rapid, with several shortcomings. Coco peat (CP) and coco fibre (CF) are refined from coconut waste, and their abundance makes them desirable for diesel spillage treatment. Using a filter-based system, the selectivity of coco peat sorbent was tested using CP, CF and peat-fibre mix (CPM). CP exhibited maximal diesel sorption capacity with minimal seawater uptake, thus being selected for further optimisation analysis. The heat treatment considerably improved the sorption capacity and efficiency of diesel absorbed by CP, as supported by FTIR and VPSEM–EDX analysis. Conventional one-factor-at-a-time (OFAT) examined the performance of diesel sorption by CP under varying parameters, namely temperature, time of heating, packing density and diesel concentration. The significant factors were statistically evaluated using response surface methodology (RSM) via Plackett–Burman design (PB) and central composite design (CCD). Three significant (p < 0.05) factors (time, packing density and diesel concentration) were identified by PB and further analysed for interactions among the parameters. CCD predicted efficiency of diesel absorbed at 59.92% (71.90 mL) (initial diesel concentration of 30% v/v) and the experimental model validated the design with 59.17% (71.00 mL) diesel sorbed at the optimised conditions of 14.1 min of heating (200 °C) with packing density of 0.08 g/cm3 and 30% (v/v) of diesel concentration. The performance of CP in RSM (59.17%) was better than that in OFAT (58.33%). The discoveries imply that natural sorbent materials such as CP in oil spill clean-up operations can be advantageous and environmentally feasible. This study also demonstrated the diesel-filter system as a pilot study for the prospective up-scale application of oil spills.

The extensive industrial use of the heavy metal molybdenum (Mo) has led to an emerging global pollution with its traces that can even be found in Antarctica. In response, a reduction process that transforms hexamolybdate (Mo6+) to a less toxic compound, Mo-blue, using microorganisms provides a sustainable remediation approach. The aim of this study was to investigate the reduction of Mo by a psychrotolerant Antarctic marine bacterium, Marinomonas sp. strain AQ5-A9. Mo reduction was optimised using One-Factor-At-a-Time (OFAT) and Response Surface Methodology (RSM). Subsequently, Mo reduction kinetics were further studied. OFAT results showed that maximum Mo reduction occurred in culture media conditions of pH 6.0 and 50 ppt salinity at 15 °C, with initial sucrose, nitrogen and molybdate concentrations of 2.0%, 3.0 g/L and 10 mM, respectively. Further optimization using RSM identified improved optimum conditions of pH 6.0 and 47 ppt salinity at 16 °C, with initial sucrose, nitrogen and molybdate concentrations of 1.8%, 2.25 g/L and 16 mM, respectively. Investigation of the kinetics of Mo reduction revealed Aiba as the best-fitting model. The calculated Aiba coefficient of maximum Mo reduction rate (µmax) was 0.067 h−1. The data obtained support the potential use of marine bacteria in the bioremediation of Mo.

Hydrocarbon pollution is widespread around the globe and, even in the remoteness of Antarctica, the impacts of hydrocarbons from anthropogenic sources are still apparent. Antarctica’s chronically cold temperatures and other extreme environmental conditions reduce the rates of biological processes, including the biodegradation of pollutants. However, the native Antarctic microbial diversity provides a reservoir of cold-adapted microorganisms, some of which have the potential for biodegradation. This study evaluated the diesel hydrocarbon-degrading ability of a psychrotolerant marine bacterial consortium obtained from the coast of the north-west Antarctic Peninsula. The consortium’s growth conditions were optimised using one-factor-at-a-time (OFAT) and statistical response surface methodology (RSM), which identified optimal growth conditions of pH 8.0, 10 °C, 25 ppt NaCl and 1.5 g/L NH4NO3. The predicted model was highly significant and confirmed that the parameters’ salinity, temperature, nitrogen concentration and initial diesel concentration significantly influenced diesel biodegradation. Using the optimised values generated by RSM, a mass reduction of 12.23 mg/mL from the initial 30.518 mg/mL (4% (w/v)) concentration of diesel was achieved within a 6 d incubation period. This study provides further evidence for the presence of native hydrocarbon-degrading bacteria in non-contaminated Antarctic seawater.

Since the heroic age of Antarctic exploration, the continent has been pressurized by multiple anthropogenic activities, today including research and tourism, which have led to the emergence of phenol pollution. Natural attenuation rates are very slow in this region due to the harsh environmental conditions; hence, biodegradation of phenol using native bacterial strains is recognized as a sustainable remediation approach. The aim of this study was to analyze the effectiveness of phenol degradation by a binary consortium of Antarctic soil bacteria, Arthrobacter sp. strain AQ5-06, and Arthrobacter sp. strain AQ5-15. Phenol degradation by this co-culture was statistically optimized using response surface methodology (RSM) and tolerance of exposure to different heavy metals was investigated under optimized conditions. Analysis of variance of central composite design (CCD) identified temperature as the most significant factor that affects phenol degradation by this consortium, with the optimum temperature ranging from 12.50 to 13.75 °C. This co-culture was able to degrade up to 1.7 g/L of phenol within seven days and tolerated phenol concentration as high as 1.9 g/L. Investigation of heavy metal tolerance revealed phenol biodegradation by this co-culture was completed in the presence of arsenic (As), aluminum (Al), copper (Cu), zinc (Zn), lead (Pb), cobalt (Co), chromium (Cr), and nickel (Ni) at concentrations of 1.0 ppm, but was inhibited by cadmium (Cd), silver (Ag), and mercury (Hg).

Despite the continuous enforcement of Antarctic Treaty System, ATS (1961), today Antarctica is constantly plagued by hydrocarbon pollution from both legacy and present-day wastes, especially near where anthropogenic activities are the most intense. The advances of science have led to multiple breakthroughs to bolster bioremediation techniques and revamp existing laws that prevent or limit the extent of hydrocarbon pollution in Antarctica. This review serves as the extension of collective efforts by the Antarctic communities through visual representation that summarizes decades of findings (circa 2000–2020) from various fields, pertinent to the application of microbe-mediated hydrocarbons remediation. A scientometric analysis was carried out based on indexed, scientific repositories (ScienceDirect and Scopus), encompassing various parameters, including but not limited to keywords co-occurrences, contributing countries, trends and current breakthroughs in polar research. The emergence of keywords such as bioremediation, biosurfactants, petroleum hydrocarbons, biodiesel, metagenomics and Antarctic treaty policy portrays the dynamic shifts in Antarctic affairs during the last decades, which initially focused on exploration and resources exploitation before switching to scientific research and the more recent ecotourism. This review also presents the hydrocarbonoclastic microbes studied in the past, known and proposed metabolic pathways and genes related to hydrocarbon biodegradation as well as bacterial adaptations to low-temperature condition.

The versatility of a rare metal, molybdenum (Mo) in many industrial applications is one of the reasons why Mo is currently one of the growing environmental pollutants worldwide. Traces of inorganic contaminants, including Mo, have been discovered in Antarctica and are compromising the ecosystem. Bioremediation utilising bacteria to transform pollutants into a less toxic form is one of the approaches for solving Mo pollution. Mo reduction is a process of transforming sodium molybdate with an oxidation state of 6+ to Mo-blue, an inert version of the compound. Although there are a few Mo-reducing microbes that have been identified worldwide, only two studies were reported on the microbial reduction of Mo in Antarctica. Therefore, this study was done to assess the ability of Antarctic bacterium, Arthrobacter sp. strain AQ5-05, in reducing Mo. Optimisation of Mo reduction in Mo-supplemented media was carried out using one-factor-at-a-time (OFAT) and response surface methodology (RSM) approaches. Through OFAT, Mo was reduced optimally with substrate concentration of sucrose, ammonium sulphate, and molybdate at 1 g/L, 0.2 g/L, and 10 mM, respectively. The pH and salinity of the media were the best at 7.0 and 0.5 g/L, respectively, while the optimal temperature was at 10 °C. Further optimisation using RSM showed greater Mo-blue production in comparison to OFAT. The strain was able to stand high concentration of Mo and low temperature conditions, thus showing its potential in reducing Mo in Antarctica by employing conditions optimised by RSM.

Hydrocarbons can cause pollution to Antarctic terrestrial and aquatic ecosystems, both through accidental release and the discharge of waste cooking oil in grey water. Such pollutants can persist for long periods in cold environments. The native microbial community may play a role in their biodegradation. In this study, using mixed native Antarctic bacterial communities, several environmental factors influencing biodegradation of waste canola oil (WCO) and pure canola oil (PCO) were optimised using established one-factor-at-a-time (OFAT) and response surface methodology (RSM) approaches. The factors include salinity, pH, type of nitrogen and concentration, temperature, yeast extract and initial substrate concentration in OFAT and only the significant factors proceeded for the statistical optimisation through RSM. High concentration of substrate targeted for degradation activity through RSM compared to OFAT method. As for the result, all factors were significant in PBD, while only 4 factors were significant in biodegradation of PCO (pH, nitrogen concentration, yeast extract and initial substrate concentration). Using OFAT, the most effective microbial community examined was able to degrade 94.42% and 86.83% (from an initial concentration of 0.5% (v/v)) of WCO and PCO, respectively, within 7 days. Using RSM, 94.99% and 79.77% degradation of WCO and PCO was achieved in 6 days. The significant interaction for the RSM in biodegradation activity between temperature and WCO concentration in WCO media were exhibited. Meanwhile, in biodegradation of PCO the significant factors were between (1) pH and PCO concentration, (2) nitrogen concentration and yeast extract, (3) nitrogen concentration and PCO concentration. The models for the RSM were validated for both WCO and PCO media and it showed no significant difference between experimental and predicted values. The efficiency of canola oil biodegradation achieved in this study provides support for the development of practical s

Rice straw, an agricultural waste product generated in huge quantities worldwide, is utilized to remediate diesel pollution as it possesses excellent characteristics as a natural sorbent. This study aimed to optimize factors that significantly influence the sorption capacity and the efficiency of oil absorption from diesel-polluted seawater by rice straw (RS). Spectroscopic analysis by attenuated total reflectance infrared (ATR-IR) spectroscopy and surface morphology characterization by variable pressure scanning electron microscopy (VPSEM) and energy-dispersive X-ray microanalysis (EDX) were carried out in order to understand the sorbent capability. Optimization of the factors of temperature pre-treatment of RS (90, 100, 110, 120, 130 or 140 °C), time of heating (10, 20, 30, 40, 50, 60 or 70 min), packing density (0.08, 0.10, 0.12, 0.14 or 0.16 g cm−3) and oil concentration (5, 10, 15, 20 or 25% (v/v)) was carried out using the conventional one-factor-at-a-time (OFAT) approach. To eliminate any non-significant factors, a Plackett–Burman design (PBD) in the response surface methodology (RSM) was used. A central composite design (CCD) was used to identify the presence of significant interactions between factors. The quadratic model produced provided a very good fit to the data (R2 = 0.9652). The optimized conditions generated from the CCD were 120 °C, 10 min, 0.148 g cm−3 and 25% (v/v), and these conditions enhanced oil sorption capacity from 19.6 (OFAT) to 26 mL of diesel oil, a finding verified experimentally. This study provides an improved understanding of the use of a natural sorbent as an approach to remediate diesel pollution.

This study focused on the ability of the Antarctic bacterium Rhodococcus sp. strain AQ5-14 to survive exposure to and to degrade high concentrations of phenol at 0.5 g l-1. After initial evaluation of phenol-degrading performance, the effects of salinity, pH and temperature on the rate of phenol degradation were examined. The optimum conditions for phenol degradation were pH 7 and 0.4 g l-1 NaCl at a temperature of 25°C (83.90%). An analysis using response surface methodology (RSM) and the Plackett-Burman design identified salinity, pH and temperature as three statistically significant factors influencing phenol degradation. The maximum bacterial growth was observed (optical density at 600 nm = 0.455), with medium conditions of pH 6.5, 22.5°C and 0.47 g l-1 NaCl in the central composite design of the RSM experiments enhancing phenol degradation to 99.10%. A central composite design was then used to examine the interactions among these three variables and to determine their optimal levels. There was excellent agreement (R2 = 0.9785) between experimental and predicted values, with less strong but still good agreement (R2 = 0.8376) between the predicted model values and those obtained experimentally under optimized conditions. Rhodococcus sp. strain AQ5-14 has excellent potential for the bioremediation of phenol.

Background: The potential waste canola oil-degrading ability of the cold-adapted Antarctic bacterial strain Rhodococcus sp. AQ5-07 was evaluated. Globally, increasing waste from food industries generates serious anthropogenic environmental risks that can threaten terrestrial and aquatic organisms and communities. The removal of oils such as canola oil from the environment and wastewater using biological approaches is desirable as the thermal process of oil degradation is expensive and ineffective. Results: Rhodococcus sp. AQ5-07 was found to have high canola oil-degrading ability. Physico-cultural conditions influencing its activity were studied using one-factor-at-a-time (OFAT) and statistical optimisation approaches. Considerable degradation (78.60%) of 3% oil was achieved by this bacterium when incubated with 1.0 g/L ammonium sulphate, 0.3 g/L yeast extract, pH 7.5 and 10% inoculum at 10°C over a 72-h incubation period. Optimisation of the medium conditions using response surface methodology (RSM) resulted in a 9.01% increase in oil degradation (87.61%) when supplemented with 3.5% canola oil, 1.05 g/L ammonium sulphate, 0.28g/L yeast extract, pH 7.5 and 10% inoculum at 12.5°C over the same incubation period. The bacterium was able to tolerate an oil concentration of up to 4.0%, after which decreased bacterial growth and oil degradation were observed. Conclusions: These features make this strain worthy of examination for practical bioremediation of lipid-rich contaminated sites. This is the first report of any waste catering oil degradation by bacteria originating from Antarctica.

This study focused on the ability of the Antarctic bacterium Rhodococcus sp. strain AQ5-14 to survive exposure to and to degrade high concentrations of phenol at 0.5 g l-1. After initial evaluation of phenol-degrading performance, the effects of salinity, pH and temperature on the rate of phenol degradation were examined. The optimum conditions for phenol degradation were pH 7 and 0.4 g l-1 NaCl at a temperature of 25°C (83.90%). An analysis using response surface methodology (RSM) and the Plackett-Burman design identified salinity, pH and temperature as three statistically significant factors influencing phenol degradation. The maximum bacterial growth was observed (optical density at 600 nm = 0.455), with medium conditions of pH 6.5, 22.5°C and 0.47 g l-1 NaCl in the central composite design of the RSM experiments enhancing phenol degradation to 99.10%. A central composite design was then used to examine the interactions among these three variables and to determine their optimal levels. There was excellent agreement (R2 = 0.9785) between experimental and predicted values, with less strong but still good agreement (R2 = 0.8376) between the predicted model values and those obtained experimentally under optimized conditions. Rhodococcus sp. strain AQ5-14 has excellent potential for the bioremediation of phenol.

Bovine gelatin is a biopolymer which has good potential to be used in encapsulating matrices for probiotic candidate Bifidobacterium pseudocatenulatum strain G4 (G4) because of its amphoteric nature characteristic. Beads were prepared by the extrusion method using genipin and sodium alginate as a cross-linking agent. The optimisation of bovine gelatin-genipin-sodium alginate combinations was carried out using face central composition design (FCCD) to investigate G4 beads’ strength, before and after exposed to simulated gastric (SGF), intestinal fluids (SIF), and encapsulation yield. A result of ANOVA and the polynomial regression model revealed the combinations of all three factors have a significant effect () on the bead strength. Meanwhile, for G4 encapsulation yield, only genipin showed less significant effect on the response. However, the use of this matrix remained due to the intermolecular cross-linking ability with bovine gelatin. Optimum compositions of bovine gelatin-genipin-sodium alginate were obtained at 11.21% (w/v), 1.96 mM, and 2.60% (w/v), respectively. A model was validated for accurate prediction of the response and showed no significant difference () with experimental values.

Aims: Bifidobacteria is a non-motile, Gram-positive, strictly anaerobic and non-spore-forming bacteria that can produce exopolysaccharide (EPS). EPS is a polymer of sugars, long chained polysaccharide which have been shown to give benefit towards human health. The optimum conditions for EPS production by Bifidobacterium are still scarce. Therefore, a study was conducted to optimize the growth conditions (pH, temperature and cultivation time) for a better improvement of EPS production. Methodology and results: Three Bifidobacterium strains were cultured and the highest EPS producing strain was selected for optimization. Response Surface Methodology (RSM) was used to optimize the growth conditions for a maximum EPS production. Subsequently, EPS was characterized by using FT-IR and GC-MS. Based on the result obtained, B. pseudocatenulatum KAKii had the highest EPS production compared to the other two strains namely B. pseudocatenulatum ATCC 27919 and B. animalis. Meanwhile, the optimization of the three factors towards selected strain found that EPS produced crucially depends on time of cultivation (23.59 h) other than pH (5.0) and temperature (34.75 °C). The validation showed that the predicted and experimental values were not significantly different (P > 0.05), indicating that the developed model is fitted well for the optimization. Meanwhile, FT-IR and GC-MS results showed that the EPS was composed of D-glucose, mannose, galactose, maltose and acetic acid as by-product. Conclusion, significance and impact of study: This result showed that the EPS produced by B. pseudocatenulatum KAKii is from hetero-exopolysaccharide group with acetic acid as by-product made them a possible anticancer agent in future.

Bovine skin was pretreated with bromelain enzyme and ultrasound (53 kHz and 500 W) was used to extract gelatin for the time durations of 2, 4 and 6 h at 60 °C (samples were referred as UB2, UB4 and UB6, respectively). Control (UBC) gelatin was extracted using ultrasound for 6 h at 60 °C without enzymatic pretreatment. Gelatin yield increased significantly (P < 0.05) as the time duration of ultrasound treatment increased with UB6 giving the highest yield of 19.71% followed by UBC (18.67%). Gel strength and viscosity of UBC were 603.24 g and 16.33 mPa s, respectively. The corresponding values for UB6 were 595.51 g and 16.37 mPa s, respectively. The amino acids content increased with longer duration of ultrasonic treatment and UBC exhibited the highest content of the glycine (27.06%) and hydroxyproline (17.21%) compared to other samples. Protein pattern of the gelatin samples showed the progressive degradation of polypeptide chains as the time duration of ultrasound extraction increased. As demonstrated by Fourier transform infrared (FTIR) spectroscopy, amide I band of gelatins extracted by ultrasound treatment exhibited higher wavenumbers than the commercial gelatin (CG) suggesting greater loss of molecular order in these samples. Longer duration of ultrasonic treatment resulted in denser, irregular, disorganized and more interconnected structure with increased porosity as revealed by scanning electron microscopy (SEM) but structural integrity was retained in UBC indicating degradation effect of bromelain enzyme in other samples. Finally, it was concluded that the ultrasound assisted gelatin extraction using bromelain enzyme produced high yield with good quality gelatin.

Actinidin was used to pretreat the bovine hide and ultrasonic wave (53 kHz and 500 W) was used for the time durations of 2, 4 and 6 h at 60 °C to extract gelatin samples (UA2, UA4 and UA6, respectively). Control (UAC) gelatin was extracted using ultrasound for 6 h at 60 °C without enzyme pretreatment. There was significant (p < 0.05) increase in gelatin yield as the time duration of ultrasound treatment increased with UA6 giving the highest yield of 19.65%. Gel strength and viscosity of UAC and UA6 extracted gelatin samples were 627.53 and 502.16 g and 16.33 and 15.60 mPa.s, respectively. Longer duration of ultrasound treatment increased amino acids content of the extracted gelatin and UAC exhibited the highest content of amino acids. Progressive degradation of polypeptide chains was observed in the protein pattern of the extracted gelatin as the time duration of ultrasound extraction increased. Fourier transform infrared (FTIR) spectroscopy depicted loss of molecular order and degradation in UA6. Scanning electron microscopy (SEM) revealed protein aggregation and network formation in the gelatin samples with increasing time of ultrasound treatment. The study indicated that ultrasound assisted gelatin extraction using actinidin exhibited high yield with good quality gelatin.

Background: Biodegradation of hydrocarbons in Antarctic soil has been reported to be achieved through the utilisation of indigenous cold-adapted microorganisms. Although numerous bacteria isolated from hydrocarbon-contaminated sites in Antarctica were able to demonstrate promising outcomes in utilising hydrocarbon components as their energy source, reports on the utilisation of hydrocarbons by strains isolated from pristine Antarctic soil are scarce. In the present work, two psychrotolerant strains isolated from Antarctic pristine soil with the competency to utilise diesel fuel as the sole carbon source were identified and optimised through conventional and response surface method. Results: Two potent hydrocarbon-degraders (ADL15 and ADL36) were identified via partial 16S rRNA gene sequence analysis, and revealed to be closely related to the genus Pseudomonas and Rhodococcus sp., respectively. Factors affecting diesel degradation such as temperature, hydrocarbon concentration, pH and salt tolerance were studied. Although strain ADL36 was able to withstand a higher concentration of diesel than strain ADL15, both strains showed similar optimal condition for the cell’s growth at pH 7.0 and 1.0% (w/v) NaCl at the conventional ‘one-factor-at-a-time’ level. Both strains were observed to be psychrotrophs with optimal temperatures of 20 °C. Qualitative and quantitative analysis were performed with a gas chromatograph equipped with a flame ionisation detector to measure the reduction of n-alkane components in diesel. In the pre-screening medium, strain ADL36 showed 83.75% of n-dodecane mineralisation while the reduction of n-dodecane by strain ADL15 was merely at 22.39%. The optimised condition for n-dodecane mineralisation predicted through response surface methodology enhanced the reduction of n-dodecane to 99.89 and 38.32% for strain ADL36 and strain ADL15, respectively. Conclusions: Strain ADL36 proves to be a better candidate for bioaugmentation operations on sites cont

In Asia, Climbing perch (Anabas testudineus) is commonly found in paddy fields and irrigation systems. Due to its habitat, Climbing perch is exposed to toxic pesticides used in paddy fields such as metaldehyde which is one of the most widely used molluscicide. This study aims to determine the acute toxicity Lethal Concentration50 (LC50) of metaldehyde and its effect on the behaviour and physical changes of the Climbing perch. The fish mortality responses to six different metaldehyde concentrations ranging from 180 to 330 mg/L were investigated. The 96-h LC50 values were determined and analysed using three different analysis methods which is arithmetic, logarithmic and probit graphic. The LC50 values obtained in this study were 239, 234 and 232 mg/L, respectively. After 96-h of exposure to metaldehyde, the fish showed a series of abnormal behavioural response in all cases: imbalance position, and restlessness of movement. The LC50 values show that metaldehyde is moderately toxic to the Climbing perch indicating that metaldehyde is not destructive to Climbing perch. However, long term exposure of aquatic organisms to the metaldehyde means a continuous health risk for the fish population as they are more vulnerable and it is on high risk for human to consume this toxicated fishes.

The herbicide glyphosate is often used to control weeds in agricultural lands. However, despite its ability to effectively kill weeds at low cost, health problems are still reported due to its toxicity level. The removal of glyphosate from the environment is usually done by microbiological process since chemical process of degradation is ineffective due to the presence of highly stable bonds. Therefore, finding glyphosate-degrading microorganisms in the soil of interest is crucial to remediate this glyphosate. Burkholderia vietnamiensis strain AQ5-12 was found to have glyphosate-degrading ability. Optimisation of biodegradation condition was carried out utilising one factor at a time (OFAT) and response surface methodology (RSM). Five parameters including carbon and nitrogen source, pH, temperature and glyphosate concentration were optimised. Based on OFAT result, glyphosate degradation was observed to be optimum at fructose concentration of 6, 0.5 g/L ammonia sulphate, pH 6.5, temperature of 32 °C and glyphosate concentration at 100 ppm. Meanwhile, RSM resulted in a better degradation with 92.32% of 100 ppm glyphosate compared to OFAT. The bacterium was seen to tolerate up to 500 ppm glyphosate while increasing concentration results in reduced degradation and bacterial growth rate.

Aim: The chdinesterase (ChE) based inhibition studies from fish were investigated and presented here emerged to be one of thegreat potential biomarkersfor heavy metals monitoring. Methodology: In this study, the capability of ChE extracted from the kidney of Lates calcarifer was assessed for of metal. ChE was purified through ammonium sulphate precipitation and ion exchange chromatography. Results: The piffled enzyme gave 12 fold purification with the recovery of 12.17% with specific activity of 2.889 U mgJ. The Michaelis-Menten constant (K) and V,^ value obtained was 0.1426 mM and 0.0217 pmol irin'mg∗1, respectively. The enzyme has the ability to hydrolyse acetytthiocholine iodde (ATC) at a faster rate compared to other two synthetic su bstra tes , propionylthiocholine iodide (PTC) and butyrylthiocholine iodide (BTC). ChE gave highest activity at 20- 30°C in Tris-HO buffer pH 8.0. The results showed that cholinesterase from L. calcarifer kidney was very sensitive to sensitive to copper and lead after being tested argentum, arsenic, cadmium, chromium, copper, cobalt, mercury, nickel, lead and zinc. Interpretation: The effect of heavy metals studied on the activity of ChE differed from each other. The result of the study can be used as a tool for futher developing a biomarker for the detection of heavy metals in aquatic ecosystems. In addition, the information can also be used for designing a kit, that would give a rapid and accurate result.

Gold mining companies are known to use cyanide to extract gold from minerals. The indiscriminate use of cyanide presents a major environmental issue. Serratia marcescens strain AQ07 was found to have cyanide-degrading ability. Optimisation of biodegradation condition was carried out utilising one factor at a time and response surface methodology. Cyanide degradation corresponded with growth rate with a maximum growth rate of 16.14 log cfu/mL on day 3 of incubation. Glucose and yeast extract are suitable carbon and nitrogen sources. Six parameters including carbon and nitrogen sources, pH, temperature, inoculum size and cyanide concentration were optimised. In line with the central composite design of response surface methodology, cyanide degradation was optimum at glucose concentration 5.5 g/L, yeast extract 0.55 g/L, pH 6, temperature 32.5 °C, inoculum size 20 % and cyanide concentration 200 mg/L. It was able to stand cyanide toxicity of up to 700 mg/L, which makes it an important candidate for bioremediation of cyanide. The bacterium was observed to degrade 95.6 % of 200 mg/L KCN under the optimised condition. Bacteria are reported to degrade cyanide into ammonia, formamide or formate and carbon dioxide, which are less toxic by-products. These bacteria illustrate good cyanide degradation potential that can be harnessed in cyanide remediation.

Caffeine is an important naturally occurring compound which can be degraded by bacteria. Previously, Leifsonia sp. strain SIU capable of degrading caffeine was isolated from agricultural soil. Plackett-Burman design was used to screen significant parameters that affect the rate of caffeine degradation. After the design was applied, response surface methodology (RSM) through Central Composite Design (CCD) was used to study significant parameters further, in order to get the most superior degradation conditions. The optimum concentrations of carbon source (sucrose), nitrogen source (NH4Cl), pH and initial caffeine concentration was found to be 5.0 gl(-1), 0.4 gl(-1), 6.0 and 375 ppm respectively. Second order polynomial regression model accurately showed interpretation of experimental data with an R2 value of 0.9989, Adjusted (Adj) R2, Predicted (Pred) R2 and F values of 0.9939, 0.9225 and 88.77 respectively.

Aerobic granulation is increasingly used in wastewater treatment due to its unique physical properties and microbial functionalities. Granule size defines the physical properties of granules based on biomass accumulation. This study aims to determine the profile of size development under two physicochemical conditions. Two identical bioreactors namely Rnp and Rp were operated under non-phototrophic and phototrophic conditions, respectively. An illustrative scheme was developed to comprehend the mechanism of size development that delineates the granular size throughout the granulation. Observations on granules' size variation have shown that activated sludge revolutionised into the form of aerobic granules through the increase of biomass concentration in bioreactors which also determined the changes of granule size. Both reactors demonstrated that size transformed in a similar trend when tested with and without illumination. Thus, different types of aerobic granules may increase in size in the same way as recommended in the aerobic granule size development scheme.

Caffeine (1,3,7-trimethylxanthine) is an important naturally occurring, commercially purine alkaloid which can be degraded by bacteria. It is a stimulant central nervous system and also has negative withdrawal effects and is present in different varieties of plants such as coffee plant, tea leaves, colanut, cocoa beans and other plant. It is also present in soft drinks and is being used extensively in human consumption and has in addition some therapeutic uses but in minimal amount. Evidence has proved the harmful effects of caffeine thus opening a path in the field of caffeine biodegradation. Biodegradation by bacteria is considered to be the most efficient technique in degrading caffeine within the environment. Even though there are available methods for the removal of caffeine using conventional methods such as water, supercritical and solvent decaffeination but they are lack of accuracy/specificity for the removal of caffeine and in addition to the existing caffeine which sometime remains. Microbial degradation of caffeine provides a safe and cheaper alternative compared to chemical and physical methods. Microbial candidates for caffeine biodegradation are actively being isolated globally. Caffeine degradation can occur in both aerobically and an-aerobically depending on the contaminants. Organisms such as Pseudomonas, Alcaligenes, Aspergillus, Serratia, Penicillium, Klebsiella, Stemphylium, Rhizopus, Rhodococcus, Brevibacterium, Bacillus sp., and Phanerochaete strains have been reported to have the ability to degrade caffeine.