Search

This paper proposes, a novel soft‐switching bidirectional direct current to direct current (DC–DC) converter based on switched‐capacitor and coupled‐inductor. The proposed converter has a simple structure and utilizes four switches and a three‐winding coupled inductor and can achieve a high voltage conversion ratio in both step‐up/step‐down operations. By employing the switched‐capacitor technique, voltage stress across the power switches is low and therefore low voltage rating switches can be adopted to reduce the losses of their conduction. Soft‐switching characteristic of the proposed converter reduces the switching loss of active power switches and raises the conversion efficiency. This paper presents theoretical analysis for all operating modes of the converter, voltage conversion ratio, voltage and current stresses of all power switches. Finally, to test the validity of theoretical results and demonstrate the performance of the converter, experimental results are provided. [ABSTRACT FROM AUTHOR]

This paper presents a non‐isolated single‐switch ultra‐high step‐up (UHSU) DC–DC converter with a three‐winding coupled inductor (CI) which is utilized to achieve ultra‐high voltage gain with a small amount of duty cycle leading to low conduction losses of the power switch and higher efficiency. The voltage gain of the suggested UHSU converter is adjusted by two methods: the duty cycle of the power switch and the three‐winding CI turn ratio, therefore enhancing the design flexibility of the suggested converter. Due to the utilization of the passive clamp circuit in the structure of the proposed converter, it is possible to select a power switch with low voltage rated and small ON‐state resistance, further enhancing the converter efficiency. The operation modes are discussed in detail and to clarify the salient features of the proposed converter, a comparison with other configurations is provided. Finally, to accredit the performance of the proposed converter, a 150‐W laboratory archetype with an input and output voltage of 20 and 300 V, respectively, at 50 kHz switching frequency is fabricated. [ABSTRACT FROM AUTHOR]