Search

The proliferation of 5G technology presents an unprecedented challenge in managing the energy consumption of densely deployed network infrastructures, particularly Base Stations (BSs), which account for the majority of power usage in mobile networks. The O-RAN architecture, with its emphasis on open and intelligent design, offers a promising framework to address the Energy Efficiency (EE) demands of modern telecommunication systems. This paper introduces two xApps designed for the O-RAN architecture to optimize power savings without compromising the Quality of Service (QoS). Utilizing a commercial RAN Intelligent Controller (RIC) simulator, we demonstrate the effectiveness of our proposed xApps through extensive simulations that reflect real-world operational conditions. Our results show a significant reduction in power consumption, achieving up to 50% power savings with a minimal number of User Equipments (UEs), by intelligently managing the operational state of Radio Cards (RCs), particularly through switching between active and sleep modes based on network resource block usage conditions., Comment: 6 pages, 4 figures

Deep Reinforcement Learning (DRL) emerges as a prime solution for Unmanned Aerial Vehicle (UAV) trajectory planning, offering proficiency in navigating high-dimensional spaces, adaptability to dynamic environments, and making sequential decisions based on real-time feedback. Despite these advantages, the use of DRL for UAV trajectory planning requires significant retraining when the UAV is confronted with a new environment, resulting in wasted resources and time. Therefore, it is essential to develop techniques that can reduce the overhead of retraining DRL models, enabling them to adapt to constantly changing environments. This paper presents a novel method to reduce the need for extensive retraining using a double deep Q network (DDQN) model as a pretrained base, which is subsequently adapted to different urban environments through Continuous Transfer Learning (CTL). Our method involves transferring the learned model weights and adapting the learning parameters, including the learning and exploration rates, to suit each new environment specific characteristics. The effectiveness of our approach is validated in three scenarios, each with different levels of similarity. CTL significantly improves learning speed and success rates compared to DDQN models initiated from scratch. For similar environments, Transfer Learning (TL) improved stability, accelerated convergence by 65%, and facilitated 35% faster adaptation in dissimilar settings., Comment: 6 pages

Millimeter-wave (mmWave) is a key enabler for next-generation transportation systems. However, in an urban city scenario, mmWave is highly susceptible to blockages and shadowing. Therefore, base station (BS) placement is a crucial task in the infrastructure design where coverage requirements need to be met while simultaneously supporting localisation. This work assumes a pre-deployed BS and another BS is required to be added to support both localisation accuracy and coverage rate in an urban city scenario. To solve this complex multi-objective optimisation problem, we utilise deep reinforcement learning (DRL). Concretely, this work proposes: 1) a three-layered grid for state representation as the input of the DRL, which enables it to adapt to the changes in the wireless environment represented by changing the position of the pre-deployed BS, and 2) the design of a suitable reward function for the DRL agent to solve the multi-objective problem. Numerical analysis shows that the proposed deep Q-network (DQN) model can learn/adapt from the complex radio environment represented by the terrain map and provides the same/similar solution to the exhaustive search, which is used as a benchmark. In addition, we show that an exclusive optimisation of coverage rate does not result in improved localisation accuracy, and thus there is a trade-off between the two solutions., Comment: Accepted EuCNC 2024

Plasma technology has undeniably revolutionized industrial processes in recent decades. Atmospheric pressure plasma (APP) has emerged as a prominent and widely applicable tool in various scientific disciplines. Notably, plasma-assisted flow control has become a subject of intense interest, particularly applying surface dielectric barrier discharge (SDBD) plasma actuators for aerodynamic flow control. In this study, a two-dimensional model of the SDBD plasma actuator is developed using the COMSOL Multiphysics program, incorporating air gas discharge reactions with N2/O2/Ar gases in specific ratios (0.78, 0.21, 0.01). The investigation focuses on the impact of dielectric materials (mica, silica glass, quartz, and polytetrafluoroethylene (PTFE)) on plasma characteristics and body force within the plasma actuator under constant input parameters. Moreover, the study explores how variable pressure (760, 660, and 560 torr) in different applications influences plasma properties, ultimately affecting the magnitude of the body force in the plasma actuator. These findings contribute to optimizing plasma technology for flow control applications and enhance industrial efficiency and performance.

Arxiv is acting weird and throwing error: "Bad character(s) in field Abstract." for no reason. Please refer to the manuscript.

Isotopic substitution in molecular systems can affect fundamental molecular properties including the energy position and spacing of electronic, vibrational and rotational levels, thus modifying the dynamics associated to their coherent superposition. In extreme ultraviolet spectroscopy, the photoelectron leaving the molecule after the absorption of a single photon can trigger an ultrafast nuclear motion in the cation, which can lead, eventually, to molecular fragmentation. This dynamics depends on the mass of the constituents of the cation, thus showing, in general, a significant isotopic dependence. In time-resolved attosecond photoelectron interferometry, the absorption of the extreme ultraviolet photon is accompanied by the exchange of an additional quantum of energy (typically in the infrared spectral range) with the photoelectron-photoion system, offering the opportunity to investigate in time the influence of isotopic substitution on the characteristics of the photoionisation dynamics. Here we show that attosecond photoelectron interferometry is sensitive to isotopic substitution by investigating the two-color photoionisation spectra measured in a mixture of methane (CH$_4$) and deuteromethane (CD$_4$). The isotopic dependence manifests itself in the modification of the amplitude and contrast of the oscillations of the photoelectron peaks generated in the two-color field with the two isotopologues. The observed effects are interpreted considering the differences in the time evolution of the nuclear autocorrelation functions in the two molecules.

The Network Function Virtualization (NFV)-Resource Allocation (RA) problem is NP-Hard. Traditional deployment methods revealed the existence of a starvation problem, which the researchers failed to recognize. Basically, starvation here, means the longer waiting times and eventual rejection of low-priority services due to a 'time out'. The contribution of this work is threefold: a) explain the existence of the starvation problem in the existing methods and their drawbacks, b) introduce 'Adaptive Scheduling' (AdSch) which is an 'intelligent scheduling' scheme using a three-factor approach (priority, threshold waiting time, and reliability), which proves to be more reasonable than traditional methods solely based on priority, and c) a 'Dynamic Prioritization' (DyPr), allocation method is also proposed for unseen services and the importance of macro- and micro-level priority. We presented a zero-touch solution using Deep Deterministic Policy Gradient (DDPG) for adaptive scheduling and an online-Ridge Regression (RR) model for dynamic prioritization. The DDPG successfully identified the 'Beneficial and Starving' services, efficiently deploying twice as many low-priority services as others, reducing the starvation problem. Our online-RR model learns the pattern in less than 100 transitions, and the prediction model has an accuracy rate of more than 80%.

The implementation of attosecond photoelectron-photoion coincidence spectroscopy for the investigation of atomic and molecular dynamics calls for a high-repetition-rate driving source combined with experimental setups characterized by excellent stability for data acquisition over time intervals ranging from a few hours up to a few days. This requirement is crucial for the investigation of processes characterized by low cross sections and for the characterization of fully differential photoelectron(s) and photoion(s) angular and energy distributions. We demonstrate that the implementation of industrial-grade lasers, combined with a careful design of the delay line implemented in the pump-probe setup, allows one to reach ultrastable experimental conditions leading to an error in the estimation of the time delays of only 12 as. This result opens new possibilities for the investigation of attosecond dynamics in simple quantum systems.

With the development of industrialization, air pollution is also steadily on the rise since both industrial and daily activities generate a massive amount of air pollution. Since decreasing air pollution is critical for citizens' health and well-being, air pollution monitoring is becoming an essential topic. Industrial Internet of Things (IIoT) research focuses on this crucial area. Several attempts already exist for air pollution monitoring. However, none of them are improving the performance of IoT data collection at the desired level. Inspired by the genuine Yet Another Next Generation (YANG) data model, we propose a YAng-based DAta model (YA-DA) to improve the performance of IIoT data collection. Moreover, by taking advantage of digital twin (DT) technology, we propose a DT-enabled fine-grained IIoT air quality monitoring system using YA-DA. As a result, DT synchronization becomes fine-grained. In turn, we improve the performance of IIoT data collection resulting in lower round-trip time (RTT), higher DT synchronization, and lower DT latency., Comment: This paper has been accepted at the 4th Workshop on Future of Wireless Access and Sensing for Industrial IoT (FUTUREIIOT) in IEEE Global Communications Conference (IEEE GLOBECOM) 2022

The connectivity-aware path design is crucial in the effective deployment of autonomous Unmanned Aerial Vehicles (UAVs). Recently, Reinforcement Learning (RL) algorithms have become the popular approach to solving this type of complex problem, but RL algorithms suffer slow convergence. In this paper, we propose a Transfer Learning (TL) approach, where we use a teacher policy previously trained in an old domain to boost the path learning of the agent in the new domain. As the exploration processes and the training continue, the agent refines the path design in the new domain based on the subsequent interactions with the environment. We evaluate our approach considering an old domain at sub-6 GHz and a new domain at millimeter Wave (mmWave). The teacher path policy, previously trained at sub-6 GHz path, is the solution to a connectivity-aware path problem that we formulate as a constrained Markov Decision Process (CMDP). We employ a Lyapunov-based model-free Deep Q-Network (DQN) to solve the path design at sub-6 GHz that guarantees connectivity constraint satisfaction. We empirically demonstrate the effectiveness of our approach for different urban environment scenarios. The results demonstrate that our proposed approach is capable of reducing the training time considerably at mmWave., Comment: 14 pages,8 figures, journal paper

The choice of the transmitting frequency to provide cellular-connected Unmanned Aerial Vehicle (UAV) reliable connectivity and mobility support introduce several challenges. Conventional sub-6 GHz networks are optimized for ground Users (UEs). Operating at the millimeter Wave (mmWave) band would provide high-capacity but highly intermittent links. To reach the destination while minimizing a weighted function of traveling time and number of radio failures, we propose in this paper a UAV joint trajectory and band switch approach. By leveraging Double Deep Q-Learning we develop two different approaches to learn a trajectory besides managing the band switch. A first blind approach switches the band along the trajectory anytime the UAV-UE throughput is below a predefined threshold. In addition, we propose a smart approach for simultaneous learning-based path planning of UAV and band switch. The two approaches are compared with an optimal band switch strategy in terms of radio failure and band switches for different thresholds. Results reveal that the smart approach is able in a high threshold regime to reduce the number of radio failures and band switches while reaching the desired destination., Comment: 6 pages, 4 figures, 1 table, Published at IEEE VTC Fall 2021

Digital Twin (DT) is a promising technology for the new immersive digital life with a variety of applications in areas such as Industry 4.0, aviation, and healthcare. Proliferation of this technology requires higher data rates, reliability, resilience, and lower latency beyond what is currently offered by 5G. Thus, DT can become a major driver for 6G research and development. Alternatively, 6G network development can benefit from Digital Twin technology and its powerful features such as modularity and remote intelligence. Using DT, a 6G network (or some of its components) will have the opportunity to use Artificial Intelligence more proactively in order to enhance its resilience. DT's application in telecommunications is still in its infancy. In this article we highlight some of the most promising research and development directions for this technology., Comment: Accepted for publication at IEEE Communications Standards Magazine

In this paper, cooperative non-orthogonal multiple access (C-NOMA) is considered in short packet communications with finite blocklength (FBL) codes. The performance of a decode-and-forward (DF) relaying along with selection combining (SC) and maximum ratio combining (MRC) strategies at the receiver side is examined. We explore joint user pairing and resource allocation to maximize fair throughput in a downlink (DL) scenario. In each pair, the user with a stronger channel (strong user) acts as a relay for the other one (weak user), and optimal power and blocklength are allocated to achieve max-min throughput. To this end, first, only one pair is considered, and optimal resource allocation is explored. Also, a suboptimal algorithm is suggested, which converges to a near-optimal solution. Finally, the problem is extended to a general scenario, and a suboptimal C-NOMA-based user pairing is proposed. Numerical results show that the proposed C-NOMA scheme in both SC and MRC strategies significantly improves the users' fair throughput compared to the NOMA and OMA. It is also investigated that the proposed pairing scheme based on C-NOMA outperforms the Hybrid NOMA/OMA scheme from the average throughput perspective, while the fairness index degrades slightly., Comment: 11 pages, 6 figures, This paper has been accepted to publish for IEEE systems journal

Attosecond pulses are fundamental for the investigation of valence and core-electron dynamics on their natural timescale. At present the reproducible generation and characterisation of attosecond waveforms has been demonstrated only through the process of high-order harmonic generation. Several methods for the shaping of attosecond waveforms have been proposed, including metallic filters, multilayer mirrors and manipulation of the driving field. However, none of these approaches allow for the flexible manipulation of the temporal characteristics of the attosecond waveforms, and they suffer from the low conversion efficiency of the high-order harmonic generation process. Free Electron Lasers, on the contrary, deliver femtosecond, extreme ultraviolet and X-ray pulses with energies ranging from tens of $\mathrm{\mu}$J to a few mJ. Recent experiments have shown that they can generate sub-fs spikes, but with temporal characteristics that change shot-to-shot. Here we show the first demonstration of reproducible generation of high energy ($\mathrm{\mu}$J level) attosecond waveforms using a seeded Free Electron Laser. We demonstrate amplitude and phase manipulation of the harmonic components of an attosecond pulse train in combination with a novel approach for its temporal reconstruction. The results presented here open the way to perform attosecond time-resolved experiments with Free Electron Lasers.

Price and the quality of service are two key factors taken into account by wireless network users when they choose their network provider. The recent advances in wireless technology and massive infrastructure deployments has led to better coverage, and currently at each given wirelessly covered area there are a few network providers and each have different pricing strategies. These providers can potentially set unfair expensive prices for their services. In this paper, we propose a novel crowdsourcing-based approach for fair wireless service pricing in Internet of Things (IoT). In our considered oligopoly, the regulatory sets a dynamic maximum allowed price of service to prevent anti-trust behaviour and unfair service pricing. We propose a three-tire pricing model where the regulator, wireless network providers and clients are the players of our game. Our method takes client preferences into account in pricing and discovers the fair service pricing just above the marginal costs of each network provider. Our results show that our model is not prone to collusion and will converges only if one network announces the fair price, Comment: Accepted for publication at IEEE Internet of Things Journal

Neutral Host Small Cell Providers (SCP) represent a key element of the 5G vision of ultra-dense mobile networks. However, current business models mostly focus on multi-year agreements for large venues, such as stadiums and hotel chains. These business agreements are regulated through binding Service Level Agreements (SLAs), which tend to be too cumbersome and costly for smaller scale SCPs. As a result, the neutral host model does not scale up to its full potential. In this paper, we propose a framework to enable the participation of small- to medium-sized players in the cellular market as providers offering network resources to Mobile Network Operators (MNOs). To this purpose, we review the current and emerging spectrum and technology opportunities that SCPs can use for neutral host deployments. We also propose the use of blockchain-enabled smart contracts as a simple and cost-efficient alternative to traditional SLAs for small-scale SCPs. To demonstrate this, we describe a proof of concept implementation of an Ethereum-based smart contract platform for best-effort service between an SCP and an MNO. Our simulations on potential smart contract-based deployments in city centre Dublin show that the received signal strength in the considered area will increase by an average of $10$ percent.

Unmanned Aerial Vehicle (UAV) aided wireless networks have been recently envisioned as a solution to provide a reliable, low latency cellular link for search and rescue operations over the sea. We propose three different network architectures, based on the technology deployed on the UAV: a flying relay, a flying Base Station (BS) and a flying Remote Radio Head (RRH). We describe the challenges and highlight the benefits of the proposed architectures from the perspective of search and rescue operations over the sea. We compare the performance in term of data rate and latency, analyzing different solutions to provide a Backhaul (BH)/Fronthaul (FH) link for long coverage over the sea. Results show that a system architecture is not outperforming over the others. A cost function is thus indicated as a tool to find a suboptimal solution., Comment: 5 pages, 2 tables, 3 pictures

In this paper, we investigate traits and trade-offs of a system combining UAVs with BS or C-RAN for extending the terrestrial wireless coverage over the sea in emergency situations. Results for an over the sea deployment link budget show the trade-off between power consumption and throughput to meet the Search and Rescue targets., Comment: 3 pages, 2 figures, 1 tab

Networked flying platforms can be used to provide cellular coverage and capacity. Given that 5G and beyond networks are expected to be always available and highly reliable, resilience and reliability of these networks must be investigated. This paper introduces the specific features of airborne networks that influence their resilience. We then discuss how machine learning and blockchain technologies can enhance the resilience of networked flying platforms., Comment: 2 pages, 1 figure

Network Flying Platforms (NFPs) such as unmanned aerial vehicles, unmanned balloons or drones flying at low/medium/high altitude can be employed to enhance network coverage and capacity by deploying a swarm of flying platforms that implement novel radio resource management techniques. In this paper, we propose a novel layered architecture where NFPs, of various types and flying at low/medium/high layers in a swarm of flying platforms, are considered as an integrated part of the future cellular networks to inject additional capacity and expand the coverage for exceptional scenarios (sports events, concerts, etc.) and hard-to-reach areas (rural or sparsely populated areas). Successful roll-out of the proposed architecture depends on several factors including, but are not limited to: network optimisation for NFP placement and association, safety operations of NFP for network/equipment security, and reliability for NFP transport and control/signaling mechanisms. In this work, we formulate the optimum placement of NFP at a Lower Layer (LL) by exploiting the airborne Self-organising Network (SON) features. Our initial simulations show the NFP-LL can serve more User Equipment (UE)s using this placement technique., Comment: 5 pages, 2 figures, conference paper in IEEE VTC-Fall 2017, in Proceedings IEEE Vehicular Technology Conference (VTC-Fall 2017), Toronto, Canada, Sep. 2017

Virtualization is a topic of great interest in the area of mobile and wireless communication systems. However the term virtualization is used in an inexact manner which makes it difficult to compare and contrast work that has been carried out to date. The purpose of this paper is twofold. In the first place, the paper develops a formal theory for defining virtualization. In the second instance, this theory is used as a way of surveying a body of work in the field of wireless link virtualization, a subspace of wireless network virtualization. The formal theory provides a means for distinguishing work that should be classed as resource allocation as distinct from virtualization. It also facilitates a further classification of the representation level at which the virtualization occurs, which makes comparison of work more meaningful. The paper provides a comprehensive survey and highlights gaps in the research that make for fruitful future work.