Search

The use of in vitro new approach methodologies (NAMs) to assess respiratory irritation depends on several factors, including the specifics of exposure methods and cell/tissue-based test systems. This topic was examined in the context of human health risk assessment for cleaning products at a 1-day public workshop held on 2 March 2023, organized by the American Cleaning Institute® (ACI). The goals of this workshop were to (1) review in vitro NAMs for evaluation of respiratory irritation, (2) examine different perspectives on current challenges and suggested solutions, and (3) publish a manuscript of the proceedings. Targeted sessions focused on exposure methods, in vitro cell/tissue test systems, and application to human health risk assessment. The importance of characterization of assays and development of reporting standards was noted throughout the workshop. The exposure methods session emphasized that the appropriate exposure system design depends on the purpose of the assessment. This is particularly important given the many dosimetry and technical considerations affecting relevance and translation of results to human exposure scenarios. Discussion in the in vitro cell/tissue test systems session focused on the wide variety of cell systems with varying suitability for evaluating key mechanistic steps, such as molecular initiating events (MIEs) and key events (KEs) likely present in any putative respiratory irritation adverse outcome pathway (AOP). This suggests the opportunity to further develop guidance around in vitro cell/tissue test system endpoint selection, assay design, characterization and validation, and analytics that provide information about a given assay's utility. The session on applications for human health protection emphasized using mechanistic understanding to inform the choice of test systems and integration of NAMsderived data with other data sources (e.g., physicochemical properties, exposure information, and existing in vivo data) as the basis for in vitro to in vivo extrapolation. In addition, this group noted a need to develop procedures to align NAMs-based points of departure (PODs) and uncertainty factor selection with current human health risk assessment methods, together with consideration of elements unique to in vitro data. Current approaches are described and priorities for future characterization of in vitro NAMs to assess respiratory irritation are noted. [ABSTRACT FROM AUTHOR]

The oviduct epithelium is the initial maternal contact site for embryos after fertilization, offering the microenvironment before implantation. This early gestation period is particularly sensitive to stress, which can cause reduced fertility and reproductive disorders in mammals. Nevertheless, the local impact of elevated stress hormones on the oviduct epithelium has received limited attention to date, except for a few reports on polyovulatory species like mice and pigs. In this study, we focused on the effects of chronic maternal stress on cattle, given its association with infertility issues in this monoovulatory species. Bovine oviduct epithelial cells (BOEC) differentiated at the air–liquid interface (ALI) were stimulated with 250 nmol/L cortisol for 1 or 3 weeks. Subsequently, they were assessed for morphology, bioelectrical properties, and gene expression related to oviduct function, glucocorticoid pathway, cortisol metabolism, inflammation, and apoptosis. Results revealed adverse effects of cortisol on epithelium structure, featured by deciliation, vacuole formation, and multilayering. Additionally, cortisol exposure led to an increase in transepithelial potential difference, downregulated mRNA expression of the major glucocorticoid receptor (NR3C1), upregulated the expression of cortisol-responsive genes (FKBP5, TSC22D3), and significant downregulation of oviductal glycoprotein 1 (OVGP1) and steroid receptors PGR and ESR1. The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells, indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine. The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2, an enzyme controlling the cellular capacity to metabolise cortisol. These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress. [ABSTRACT FROM AUTHOR]

Coculture of intestinal bacteria with primary human intestinal epithelium provides a valuable tool for investigating host‐colon bacterial interactions and for testing and screening therapeutics. However, most current intestinal model systems lack key physiological features of the in vivo colon, such as both a proper oxygen microenvironment and a mucus layer. In this work, a new in vitro colonic microphysiological system is demonstrated with a cell‐derived, functional mucus that closely resembles the in vivo colonic mucosa and apical microenvironment by employing an anaerobic air‐liquid interface culture. The human primary colon epithelial cells in this new in vitro system exhibit high cell viability (>98%) with ≈100 µm thick functional mucus layer on average. Successful coculture of model anaerobic gut bacterial strains Lactobacillus rhamnosus GG and Anaerobutyricum hallii without loss in human cell viability demonstrates that this new model can be an invaluable tool for future studies of the impact of commensal and pathogenic bacteria on the colon. [ABSTRACT FROM AUTHOR]

Preimplantation maternal stress, characterized by elevated glucocorticoids (GCs), has been linked to reproductive failures caused by impaired oviduct functionality, which is known to be predominantly regulated by the sex steroids, progesterone (P4) and (17)estradiol (E2). Although steroid receptors share analogous structures and binding preferences, the interaction between GCs and E2/P4 in the oviduct has attracted little attention. Using an air-liquid interface culture model, porcine oviduct epithelial cells were stimulated with single (cortisol, E2, P4) or hormone mixtures (cortisol/E2, cortisol/P4) for 12 hours and 72 hours. Cultures were subsequently assessed for epithelial morphometry, bioelectrical properties, and gene expression responses (steroid hormone signaling, oviductal function, immune response, and apoptosis). Results confirmed the suppressive role of P4 in regulating oviduct epithelium characteristics, which was partially opposed by E2. Besides increasing the ratio of ciliated cells, cortisol antagonized the effect of P4 on epithelial polarity and modified sex steroid–induced changes in transepithelial electrical properties. Both sex steroids affected the glucocorticoid receptor expression, while cortisol downregulated the expression of progesterone receptor. The overall gene expression pattern suggests that sex steroid dominates the cotreatment, but cortisol contributes by altering the gene responses to sex steroids. We conclude that besides its individual action, maternal cortisol interplays with sex steroids at phenotypic and molecular levels in the oviduct epithelium, thereby influencing the microenvironment of gametes and early embryos. [ABSTRACT FROM AUTHOR]

Abstract The oviduct epithelium is the initial maternal contact site for embryos after fertilization, offering the microenvironment before implantation. This early gestation period is particularly sensitive to stress, which can cause reduced fertility and reproductive disorders in mammals. Nevertheless, the local impact of elevated stress hormones on the oviduct epithelium has received limited attention to date, except for a few reports on polyovulatory species like mice and pigs. In this study, we focused on the effects of chronic maternal stress on cattle, given its association with infertility issues in this monoovulatory species. Bovine oviduct epithelial cells (BOEC) differentiated at the air–liquid interface (ALI) were stimulated with 250 nmol/L cortisol for 1 or 3 weeks. Subsequently, they were assessed for morphology, bioelectrical properties, and gene expression related to oviduct function, glucocorticoid pathway, cortisol metabolism, inflammation, and apoptosis. Results revealed adverse effects of cortisol on epithelium structure, featured by deciliation, vacuole formation, and multilayering. Additionally, cortisol exposure led to an increase in transepithelial potential difference, downregulated mRNA expression of the major glucocorticoid receptor (NR3C1), upregulated the expression of cortisol-responsive genes (FKBP5, TSC22D3), and significant downregulation of oviductal glycoprotein 1 (OVGP1) and steroid receptors PGR and ESR1. The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells, indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine. The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2, an enzyme controlling the cellular capacity to metabolise cortisol. These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.

Abstract The colonic epithelium is comprised of three-dimensional crypts (3D) lined with mucus secreted by a heterogeneous population of goblet cells. In this study, we report the formation of a long-lived, and self-renewing replica of human 3D crypts with a mucus layer patterned in the X–Y–Z dimensions. Primary colon cells were cultured on a shaped scaffold under an air–liquid interface to yield architecturally accurate crypts with a mucus bilayer (605 ± 180 μm thick) possessing an inner (149 ± 50 μm) and outer (435 ± 111 μm) region. Lectins with distinct carbohydrate-binding preferences demonstrated that the mucus in the intercrypt regions was chemically distinct from that above and within the crypts replicating in vivo chemical patterning. Constitutive mucus secretion ejected beads from crypt lumens in 8–10 days, while agonist-stimulated secretion increased mucus thickness by 17-fold in 8 h. The tissue was long-lived, > 50 days, the longest time assessed. In conclusion, the in vitro mucus replicated key physiology of the human mucus, including the bilayer (Z) structure and intercrypt-crypt (X–Y) zones, constitutive mucus flow, spatially complex chemical attributes, and mucus secretion response to stimulation, with the potential to reveal local and global determinants of mucus function and its breakdown in disease.

AbstractDecellularized tissue hydrogels, especially that mimic the native tissue, have a high potential for tissue engineering, three-dimensional (3D) cell culture, bioprinting, and therapeutic agent encapsulation due to their excellent biocompatibility and ability to facilitate the growth of cells. It is important to note that the decellularization process significantly affects the structural integrity and properties of the extracellular matrix, which in turn shapes the characteristics of the resulting hydrogels at the macromolecular level. Therefore, our study aims to identify an effective chemical decellularization method for sheep lung tissue, using a mixing/agitation technique with a range of detergents, including commonly [Sodium dodecyl sulfate (SDS), Triton X-100, and 3-((3-cholamidopropyl) dimethylammonio)-1-propanesulfonate] (CHAPS), and rarely used (sodium cholate hydrate, NP-40, and 3-[N,N-Dimethyl(3-myristoylaminopropyl)ammonio]propanesulfonate) (ASB-14). After the effectiveness of the used detergents on decellularization was determined by histological and biochemical methods, lung derived decellularized extracellular matrix was converted into hydrogel. We investigated the interactions between lung cells and decellularized extracellular matrix using proliferation assay, scanning electron microscopy, and immunofluorescence microscopy methods on BEAS-2B cells in air-liquid interface. Notably, this study emphasizes the effectiveness of ASB-14 in the decellularization process, showcasing its crucial role in removing cellular components while preserving vital extracellular matrix biological macromolecules, including glycosaminoglycans, collagen, and elastin. The resulting hydrogels demonstrated favorable mechanical properties and are compatible with both cell-cell and cell-extracellular matrix interactions. [ABSTRACT FROM AUTHOR]

• A new set-up using a peristaltic pump and a Langmuir-Pockels trough was designed to decouple the application of hydrodynamic stress and the application of interfacial dilatational stress. • Using this set-up, we measured the impact of hydrodynamic shear and interfacial dilatational stresses applied sequentially, on the interfacial properties (surface activity) of an industrially relevant IgG mAb solution. • Protein particle formation under different stress conditions were characterized using microflow and brightfield imaging. • Our results taken together show that protein solutions that are exposed to interfacial dilatational stress acting at the air-water interface have the highest protein particle concentrations, regardless of the solution being pumped prior to application of compression/expansion stress at the interface. • The order in which the protein solution is subjected to hydrodynamic shear and interfacial dilatational forces are applied, does in fact have a significant impact on protein particle formation, both at the interface and in the bulk solution. During biomanufacturing, several unit operations expose solutions of biologics to multiple stresses, such as hydrodynamic shear forces due to fluid flow and interfacial dilatational stresses due to mechanical agitation or bubble collapse. When these stresses individually act on proteins adsorbed to interfaces, it results in an increase in protein particles in the bulk solution, a phenomenon referred to as interface-induced protein particle formation. However, an understanding of the dominant cause, when multiple stresses are acting simultaneously or sequentially, on interface-induced protein particle formation is limited. In this work, we established a unique set-up using a peristaltic pump and a Langmuir-Pockels trough to study the impact of hydrodynamic shear stress due to pumping and interfacial dilatational stress, on protein particle formation. Our experimental results together demonstrate that for protein solutions subjected to various combinations of stress (i.e., interfacial and hydrodynamic stress in different sequences), surface pressure values during adsorption and when subjected to compression/dilatational stresses, showed no change, suggesting that the interfacial properties of the protein film are not impacted by pumping. The concentration of protein particles is an order of magnitude higher when interfacial dilatational stress is applied at the air-liquid interface, compared to solutions that are only subjected to pumping. Furthermore, the order in which these stresses are applied, have a significant impact on the concentration of protein particles measured in the bulk solution. Together, these studies conclude that for biologics exposed to multiple stresses throughout bioprocessing and manufacturing, exposure to air-liquid interfacial dilatational stress is the predominant mechanism impacting protein particle formation at the interface and in the bulk solution. [ABSTRACT FROM AUTHOR]

There is a need for the assessment of respiratory hazard potential and mode of action of carbon nanotubes (CNTs) before their approval for technological or medical applications. In CNT-exposed lungs, both alveolar macrophages (MФs), which phagocytose CNTs, and alveolar epithelial type II cells (AECII cells), which show tissue injury, are impacted but cell–cell interactions between them and the impacted mechanisms are unclear. To investigate this, we first optimized an air–liquid interface (ALI) transwell coculture of human AECII cell line A549 (upper chamber) and human monocyte cell line THP-1 derived macrophages (lower chamber) in a 12-well culture by exposing macrophages to CNTs at varying doses (5–60 ng/well) for 12–48 h and measuring the epithelial response markers for cell differentiation/maturation (proSP-C), proliferation (Ki-67), and inflammation (IL-1β). In optimal ALI epithelial-macrophage coculture (3:1 ratio), expression of Ki-67 in AECII cells showed dose dependence, peaking at 15 ng/well CNT dose; the Ki-67 and IL-1β responses were detectable within 12 h, peaking at 24–36 h in a time-course. Using the optimized ALI transwell coculture set up with and without macrophages, we demonstrated that direct interaction between CNTs and MФs, but not a physical cell–cell contact between MФ and AECII cells, was essential for inducing immunotoxicity (proliferative and inflammatory responses) in the AECII cells. [ABSTRACT FROM AUTHOR]

The colonic epithelium is comprised of three-dimensional crypts (3D) lined with mucus secreted by a heterogeneous population of goblet cells. In this study, we report the formation of a long-lived, and self-renewing replica of human 3D crypts with a mucus layer patterned in the X–Y–Z dimensions. Primary colon cells were cultured on a shaped scaffold under an air–liquid interface to yield architecturally accurate crypts with a mucus bilayer (605 ± 180 μm thick) possessing an inner (149 ± 50 μm) and outer (435 ± 111 μm) region. Lectins with distinct carbohydrate-binding preferences demonstrated that the mucus in the intercrypt regions was chemically distinct from that above and within the crypts replicating in vivo chemical patterning. Constitutive mucus secretion ejected beads from crypt lumens in 8–10 days, while agonist-stimulated secretion increased mucus thickness by 17-fold in 8 h. The tissue was long-lived, > 50 days, the longest time assessed. In conclusion, the in vitro mucus replicated key physiology of the human mucus, including the bilayer (Z) structure and intercrypt-crypt (X–Y) zones, constitutive mucus flow, spatially complex chemical attributes, and mucus secretion response to stimulation, with the potential to reveal local and global determinants of mucus function and its breakdown in disease. [ABSTRACT FROM AUTHOR]

Background: The role of Akt in nasal immunity is unstudied. Akt phosphorylates and activates endothelial nitric oxide synthase (eNOS) expressed in epithelial ciliated cells. Nitric oxide (NO) production by ciliated cells can have antibacterial and antiviral effects. Increasing nasal NO may be a useful antipathogen strategy in chronic rhinosinusitis (CRS). We previously showed that small‐molecule Akt activator SC79 induces nasal cell NO production and suppresses IL‐8 via the transcription factor Nrf‐2. We hypothesized that SC79 NO production may additionally have antibacterial effects. Methods: NO production was measured using fluorescent dye DAF‐FM. We tested effects of SC79 during co‐culture of Pseudomonas aeruginosa with primary nasal epithelial cells, using CFU counting and live–dead staining to quantify bacterial killing. Pharmacology determined the mechanism of SC79‐induced NO production and tested dependence on Akt. Results: SC79 induced dose‐dependent, Akt‐dependent NO production in nasal epithelial cells. The NO production required eNOS and Akt. The NO released into the airway surface liquid killed P. aeruginosa. No toxicity (LDH release) or inflammatory effects (IL8 transcription) were observed over 24 h. Conclusions: Together, these data suggest multiple immune pathways are stimulated by SC79, with antipathogen effects. This in vitro pilot study suggests that a small‐molecule Akt activator may have clinical utility in CRS or respiratory other infection settings, warranting future in vivo studies. [ABSTRACT FROM AUTHOR]

Severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) binds to angiotensin‐converting enzyme 2 (ACE2) on host cells, via its spike protein, and transmembrane protease, serine 2 (TMPRSS2) cleaves the spike‐ACE2 complex to facilitate virus entry. As rate‐limiting steps for virus entry, modulation of ACE2 and/or TMPRSS2 may decrease SARS‐CoV‐2 infectivity and COVID‐19 severity. In silico modeling suggested the natural bioactive flavonoid quercetin can bind to ACE2 and a recent randomized clinical trial demonstrated that oral supplementation with quercetin increased COVID‐19 recovery. A range of cultured human cells were assessed for co‐expression of ACE2 and TMPRSS2. Immortalized Calu‐3 lung cells, cultured and matured at an air–liquid interface (Calu‐3‐ALIs), were established as the most appropriate. Primary bronchial epithelial cells (PBECs) were obtained from healthy adult males (N = 6) and cultured under submerged conditions to corroborate the outcomes. Upon maturation or reaching 80% confluence, respectively, the Calu‐3‐ALIs and PBECs were treated with quercetin, and mRNA and protein expression were assessed by droplet digital PCR and ELISA, respectively. SARS‐CoV‐2 infectivity, and the effects of pre‐ and co‐treatment with quercetin, was assessed by median tissue culture infectious dose assay. Quercetin dose‐dependently decreased ACE2 and TMPRSS2 mRNA and protein in both Calu‐3‐ALIs and PBECs after 4 h, while TMPRSS2 remained suppressed in response to prolonged treatment with lower doses (twice daily for 3 days). Quercetin also acutely decreased ADAM17 mRNA, but not ACE, in Calu‐3‐ALIs, and this warrants further investigation. Calu‐3‐ALIs, but not PBECs, were successfully infected with SARS‐CoV‐2; however, quercetin had no antiviral effect, neither directly nor indirectly through downregulation of ACE2 and TMPRSS2. Calu‐3‐ALIs were reaffirmed to be an optimal cell model for research into the regulation of ACE2 and TMPRSS2, without the need for prior genetic modification, and will prove valuable in future coronavirus and respiratory infectious disease work. However, our data demonstrate that a significant decrease in the expression of ACE2 and TMPRSS2 by a promising prophylactic candidate may not translate to infection prevention. [ABSTRACT FROM AUTHOR]

Langmuir–Blodgett (LB) film technology is an advanced technique for the preparation of ordered molecular ultra-thin films at the molecular level, which transfers a single layer of film from the air/water interface to a solid substrate for the controlled assembly of molecules. LB technology has continually evolved over the past century, revealing its potential applications across diverse fields. In this study, the latest research progress of LB film technology is reviewed, with emphasis on its latest applications in gas sensors, electrochemical devices, and bionic films. Additionally, this review evaluates the strengths and weaknesses of LB technology in the application processes and discusses the promising prospects for future application of LB technology. [ABSTRACT FROM AUTHOR]

Key reproductive events such as fertilization and early embryonic development occur in the lumen of the oviduct. Since investigating these processes in vivo is both technically challenging and ethically sensitive, cell culture models have been established to reproduce the oviductal microenvironment. Compartmentalized culture systems, particularly air–liquid interface cultures (ALI; cells access the culture medium only from the basolateral cell side), result in highly differentiated oviduct epithelial cell cultures. The oxygen (O2) tension within the oviduct is 4–10% across species, and its reduced O2 content is presumed to be important for early reproductive processes. However, cell culture models of the oviduct are typically cultivated without O2 regulation and therefore at about 18% O2. To investigate the impact of O2 levels on oviduct epithelium functions in vitro, we cultured porcine oviduct epithelial cells (POEC) at the ALI using both physiological (5%) and supraphysiological (18%) O2 levels and two different media regimes. Epithelium architecture, barrier function, secretion of oviduct fluid surrogate (OFS), and marker gene expression were comparatively assessed. Under all culture conditions, ALI-POEC formed polarized, ciliated monolayers with appropriate barrier function. Exposure to 18% O2 accelerated epithelial differentiation and significantly increased the apical OFS volume and total protein content. Expression of oviduct genes and the abundance of OVGP1 (oviduct-specific glycoprotein 1) in the OFS were influenced by both O2 tension and medium choice. In conclusion, oviduct epithelial cells can adapt to a supraphysiological O2 environment. This adaptation, however, may alter their capability to replicate in vivo tissue characteristics. [ABSTRACT FROM AUTHOR]

Understanding the reaction mechanisms involved in the enzymatic hydrolysis of cellulose is important because it is kinetically the most limiting step of the bioethanol production process. The present work focuses on the enzymatic deactivation at the air–liquid interface, which is one of the aspects contributing to this global deactivation. This phenomenon has already been experimentally proven, but this is the first time that a model has been proposed to describe it. Experiments were performed by incubating Celluclast cocktail solutions on an orbital stirring system at different enzyme concentrations and different surface‐to‐volume ratios. A 5‐day follow‐up was carried out by measuring the global FPase activity of cellulases for each condition tested. The activity loss was proven to depend on both the air–liquid surface area and the enzyme concentration. Both observations suggest that the loss of activity takes place at the air–liquid surface, the total amount of enzymes varying with volume or enzyme concentration. Furthermore, tests performed using five individual enzymes purified from a Trichoderma reesei cocktail showed that the only cellulase that is deactivated at the air–liquid interface is cellobiohydrolase II. From the experimental data collected by varying the initial enzyme concentration and the ratio surface to volume, it was possible to develop, for the first time, a model that describes the loss of activity at the air‐liquid interface for this configuration. [ABSTRACT FROM AUTHOR]

The use of in vitro new approach methodologies (NAMs) to assess respiratory irritation depends on several factors, including the specifics of exposure methods and cell/tissue-based test systems. This topic was examined in the context of human health risk assessment for cleaning products at a 1-day public workshop held on 2 March 2023, organized by the American Cleaning Institute® (ACI). The goals of this workshop were to (1) review in vitro NAMs for evaluation of respiratory irritation, (2) examine different perspectives on current challenges and suggested solutions, and (3) publish a manuscript of the proceedings. Targeted sessions focused on exposure methods, in vitro cell/tissue test systems, and application to human health risk assessment. The importance of characterization of assays and development of reporting standards was noted throughout the workshop. The exposure methods session emphasized that the appropriate exposure system design depends on the purpose of the assessment. This is particularly important given the many dosimetry and technical considerations affecting relevance and translation of results to human exposure scenarios. Discussion in the in vitro cell/tissue test systems session focused on the wide variety of cell systems with varying suitability for evaluating key mechanistic steps, such as molecular initiating events (MIEs) and key events (KEs) likely present in any putative respiratory irritation adverse outcome pathway (AOP). This suggests the opportunity to further develop guidance around in vitro cell/tissue test system endpoint selection, assay design, characterization and validation, and analytics that provide information about a given assay’s utility. The session on applications for human health protection emphasized using mechanistic understanding to inform the choice of test systems and integration of NAMs-derived data with other data sources (e.g., physicochemical properties, exposure information, and existing in vivo data) as the basis for in vitro to in vivo extrapolation. In addition, this group noted a need to develop procedures to align NAMs-based points of departure (PODs) and uncertainty factor selection with current human health risk assessment methods, together with consideration of elements unique to in vitro data. Current approaches are described and priorities for future characterization of in vitro NAMs to assess respiratory irritation are noted.

Abstract Coculture of intestinal bacteria with primary human intestinal epithelium provides a valuable tool for investigating host‐colon bacterial interactions and for testing and screening therapeutics. However, most current intestinal model systems lack key physiological features of the in vivo colon, such as both a proper oxygen microenvironment and a mucus layer. In this work, a new in vitro colonic microphysiological system is demonstrated with a cell‐derived, functional mucus that closely resembles the in vivo colonic mucosa and apical microenvironment by employing an anaerobic air‐liquid interface culture. The human primary colon epithelial cells in this new in vitro system exhibit high cell viability (>98%) with ≈100 µm thick functional mucus layer on average. Successful coculture of model anaerobic gut bacterial strains Lactobacillus rhamnosus GG and Anaerobutyricum hallii without loss in human cell viability demonstrates that this new model can be an invaluable tool for future studies of the impact of commensal and pathogenic bacteria on the colon.

Abstract Background Gastric intestinal metaplasia (GIM) is an essential precancerous lesion. Although the reversal of GIM is challenging, it potentially brings a state-to-art strategy for gastric cancer therapeutics (GC). The lack of the appropriate in vitro model limits studies of GIM pathogenesis, which is the issue this work aims to address for further studies. Method The air-liquid interface (ALI) model was adopted for the long-term culture of GIM cells in the present work. This study conducted Immunofluorescence (IF), quantitative real-time polymerase chain reaction (qRT-PCR), transcriptomic sequencing, and mucoproteomic sequencing (MS) techniques to identify the pathways for differential expressed genes (DEGs) enrichment among different groups, furthermore, to verify novel biomarkers of GIM cells. Result Our study suggests that GIM-ALI model is analog to the innate GIM cells, which thus can be used for mucus collection and drug screening. We found genes MUC17, CDA, TRIM15, TBX3, FLVCR2, ONECUT2, ACY3, NMUR2, and MAL2 were highly expressed in GIM cells, while GLDN, SLC5A5, MAL, and MALAT1 showed down-regulated, which can be used as potential biomarkers for GIM cells. In parallel, these genes that highly expressed in GIM samples were mainly involved in cancer-related pathways, such as the MAPK signal pathway and oxidative phosphorylation signal pathway. Conclusion The ALI model is validated for the first time for the in vitro study of GIM. GIM-ALI model is a novel in vitro model that can mimic the tissue micro-environment in GIM patients and further provide an avenue for studying the characteristics of GIM mucus. Our study identified new markers of GIM as well as pathways associated with GIM, which provides outstanding insight for exploring GIM pathogenesis and potentially other related conditions.

Abstract Background The alveolar epithelium is exposed to numerous stimuli, such as chemicals, viruses, and bacteria that cause a variety of pulmonary diseases through inhalation. Alveolar epithelial cells (AECs) cultured in vitro are a valuable tool for studying the impacts of these stimuli and developing therapies for associated diseases. However, maintaining the proliferative capacity of AECs in vitro is challenging. In this study, we used a cocktail of three small molecule inhibitors to cultivate AECs: Y-27632, A-83-01, and CHIR99021 (YAC). These inhibitors reportedly maintain the proliferative capacity of several types of stem/progenitor cells. Results Primary human AECs cultured in medium containing YAC proliferated for more than 50 days (over nine passages) under submerged conditions. YAC-treated AECs were subsequently cultured at the air-liquid interface (ALI) to promote differentiation. YAC-treated AECs on ALI day 7 formed a monolayer of epithelial tissue with strong expression of the surfactant protein-encoding genes SFTPA1, SFTPB, SFTPC, and SFTPD, which are markers for type II AECs (AECIIs). Immunohistochemical analysis revealed that paraffin sections of YAC-treated AECs on ALI day 7 were mainly composed of cells expressing surfactant protein B and prosurfactant protein C. Conclusions Our results indicate that YAC-containing medium could be useful for expansion of AECIIs, which are recognized as local stem/progenitor cells, in the alveoli.

Engineered 3D neural tissues made of neurons and glial cells derived from human induced pluripotent stem cells (hiPSC) are among the most promising tools in drug discovery and neurotoxicology. They represent a cheaper, faster, and more ethical alternative to in vivo animal testing that will likely close the gap between in vitro animal models and human clinical trials. Micro-Electrode Array (MEA) technology is known to provide an assessment of compound effects on neural 2D cell cultures and acute tissue preparations by real-time, noninvasive, and long-lasting electrophysiological monitoring of spontaneous and evoked neuronal activity. Nevertheless, the use of engineered 3D neural tissues in combination with MEA biochips still involves series of constraints, such as drastically limited diffusion of oxygen and nutrients within tissues mainly due to the lack of vascularization. Therefore, 3D neural tissues are extremely sensitive to experimental conditions and require an adequately designed interface that provides optimal tissue survival conditions. A well-suited technique to overcome this issue is the combination of the Air-Liquid Interface (ALI) tissue culture method with the MEA technology. We have developed a full 3D neural tissue culture process and a data acquisition system composed of high-end electronics and novel MEA biochips based on porous, flexible, thin-film membranes integrating recording electrodes, named as "Strip-MEA," to allow the maintenance of an ALI around the 3D neural tissues. The main motivation of the porous MEA biochips development was the possibility to monitor and to study the electrical activity of 3D neural tissues under different recording configurations, (i) the Strip-MEA can be placed below a tissue, (ii) or by taking advantage of the ALI, be directly placed on top of the tissue, or finally, (iii) it can be embedded into a larger neural tissue generated by the fusion of two (or more) tissues placed on both sides of the Strip-MEA allowing the recording from its inner part. This paper presents the recording and analyses of spontaneous activity from the three positioning configurations of the Strip-MEAs. Obtained results are discussed with the perspective of developing in vitro models of brain diseases and/or impairment of neural network functioning. [ABSTRACT FROM AUTHOR]

Background: Gastric intestinal metaplasia (GIM) is an essential precancerous lesion. Although the reversal of GIM is challenging, it potentially brings a state-to-art strategy for gastric cancer therapeutics (GC). The lack of the appropriate in vitro model limits studies of GIM pathogenesis, which is the issue this work aims to address for further studies. Method: The air-liquid interface (ALI) model was adopted for the long-term culture of GIM cells in the present work. This study conducted Immunofluorescence (IF), quantitative real-time polymerase chain reaction (qRT-PCR), transcriptomic sequencing, and mucoproteomic sequencing (MS) techniques to identify the pathways for differential expressed genes (DEGs) enrichment among different groups, furthermore, to verify novel biomarkers of GIM cells. Result: Our study suggests that GIM-ALI model is analog to the innate GIM cells, which thus can be used for mucus collection and drug screening. We found genes MUC17, CDA, TRIM15, TBX3, FLVCR2, ONECUT2, ACY3, NMUR2, and MAL2 were highly expressed in GIM cells, while GLDN, SLC5A5, MAL, and MALAT1 showed down-regulated, which can be used as potential biomarkers for GIM cells. In parallel, these genes that highly expressed in GIM samples were mainly involved in cancer-related pathways, such as the MAPK signal pathway and oxidative phosphorylation signal pathway. Conclusion: The ALI model is validated for the first time for the in vitro study of GIM. GIM-ALI model is a novel in vitro model that can mimic the tissue micro-environment in GIM patients and further provide an avenue for studying the characteristics of GIM mucus. Our study identified new markers of GIM as well as pathways associated with GIM, which provides outstanding insight for exploring GIM pathogenesis and potentially other related conditions. [ABSTRACT FROM AUTHOR]

[Display omitted] Secondary drops (SDs) generated when falling drops impact a same-liquid bath can potentially generate antibubbles. Different mechanisms of antibubble formation can be identified and their size and formation probability (P Ab) can be predicted. Surfactant solutions were dropped from various heights using a highly stable pulseless microfluidic pump in a same-liquid bath. The impact was recorded using a high-speed camera. The formation of SDs and antibubbles as well as their sizes were evaluated considering the falling-drop height (H FD) and dimensionless parameters. This study reports new mechanisms for antibubble formation from SDs. A decrease in the surface tension yielded a thinner central jet, thereby yielding more SDs. Larger values of the H FD , impact velocity (U), and Weber number (We) increased the SD size and decreased the SD count; the increase in size increased the antibubble size. The number of SDs correlated with the formation of two distinct antibubbles or a single (coalesced) antibubble. The plots for P Ab versus H FD , U, and We exhibited two distinct peaks. A moderate increase in the surfactant concentration enhanced P Ab in the first regime, whereas an excessive concentration limited antibubble formation. Artificial neural modeling can successfully predict antibubble formation. These findings provide valuable insights for the research on controlled antibubble generation. [ABSTRACT FROM AUTHOR]

Asthma is a chronic respiratory disease with one of the largest numbers of cases in the world; thus, constant investigation and technical development are needed to unravel the underlying biochemical mechanisms. In this study, we aimed to develop a nano-DESI MS method for the in vivo characterization of the cellular metabolome. Using air–liquid interface (ALI) cell layers, we studied the role of Interleukin-13 (IL-13) on differentiated lung epithelial cells acting as a lung tissue model. We demonstrate the feasibility of nano-DESI MS for the in vivo monitoring of basal–apical molecular transport, and the subsequent endogenous metabolic response, for the first time. Conserving the integrity of the ALI lung-cell layer enabled us to perform temporally resolved metabolomic characterization followed by "bottom-up" proteomics on the same population of cells. Metabolic remodeling was observed upon histamine and corticosteroid treatment of the IL-13-exposed lung cell monolayers, in correlation with alterations in the proteomic profile. This proof of principle study demonstrates the utility of in vivo nano-DESI MS for characterizing ALI tissue layers, and the new markers identified in our study provide a good starting point for future, larger-scale studies. [ABSTRACT FROM AUTHOR]

To evaluate underwater sound, a simple non-invasive optical technique based on self-interference to detect low-frequency underwater acoustic signals was demonstrated. Clear self-interference fringes of a laser beam reflected from the surface capillary wave transformed from a low-frequency underwater acoustic signal by a cylinder were observed. This study was also aimed at developing an artificial neural network (ANN) model with input from an optical pattern. The relationship between the optical pattern and the frequency of underwater sound was established, and an optimal combination of hyper-parameters was obtained. By analyzing the fringe region and the fringe interval, the frequency of the underwater acoustic signal and its relative amplitude were measured. A model based on physical optics modified the fringe distribution function, and the theoretical fit with the modified function was in good agreement with experimental observation. The BP-ANN model exhibited good performance in establishing the relationship between the optical pattern and underwater sound. [ABSTRACT FROM AUTHOR]

Fine particulate matter (PM2.5) can enter the human body in various ways and have adverse effects on human health. Human lungs and eyes are exposed to the air for a long time and are the first to be exposed to PM2.5. The "liquid immersion exposure method" has some limitations that prevent it from fully reflecting the toxic effects of particulate matter on the human body. In this study, the collected PM2.5 samples were chemically analyzed. An air–liquid interface (ALI) model with a high correlation to the in vivo environment was established based on human lung epithelial cells (A549) and immortalized human corneal epithelial cells (HCE-T). The VITROCELL Cloud 12 system was used to distribute PM2.5 on the cells evenly. After exposure for 6 h and 24 h, cell viability, apoptosis rate, reactive oxygen species (ROS) level, expression of inflammatory factors, and deoxyribonucleic acid (DNA) damage were measured. The results demonstrated significant dose- and time-dependent effects of PM2.5 on cell viability, cell apoptosis, ROS generation, and DNA damage at the ALI, while the inflammatory factors showed dose-dependent effects only. It should be noted that even short exposure to low doses of PM2.5 can cause cell DNA double-strand breaks and increased expression of γ-H2AX, indicating significant genotoxicity of PM2.5. Increased abundance of ROS in cells plays a crucial role in the cytotoxicity induced by PM2.5 exposure These findings emphasize the significant cellular damage and genotoxicity that may result from short-term exposure to low levels of PM2.5. [ABSTRACT FROM AUTHOR]

We present a novel lung aerosol exposure system named MALIES (modular air–liquid interface exposure system), which allows three-dimensional cultivation of lung epithelial cells in alveolar-like scaffolds (MatriGrids®) and exposure to nanoparticle aerosols. MALIES consists of multiple modular units for aerosol generation, and can be rapidly assembled and commissioned. The MALIES system was proven for its ability to reliably produce a dose-dependent toxicity in A549 cells using CuSO4 aerosol. Cytotoxic effects of BaSO4- and TiO2-nanoparticles were investigated using MALIES with the human lung tumor cell line A549 cultured at the air–liquid interface. Experiments with concentrations of up to 5.93 × 105 (BaSO4) and 1.49 × 106 (TiO2) particles/cm3, resulting in deposited masses of up to 26.6 and 74.0 µg/cm2 were performed using two identical aerosol exposure systems in two different laboratories. LDH, resazurin reduction and total glutathione were measured. A549 cells grown on MatriGrids® form a ZO-1- and E-Cadherin-positive epithelial barrier and produce mucin and surfactant protein. BaSO4-NP in a deposited mass of up to 26.6 µg/cm2 resulted in mild, reversible damage (~ 10% decrease in viability) to lung epithelium 24 h after exposure. TiO2-NP in a deposited mass of up to 74.0 µg/cm2 did not induce any cytotoxicity in A549 cells 24 h and 72 h after exposure, with the exception of a 1.7 fold increase in the low exposure group in laboratory 1. These results are consistent with previous studies showing no significant damage to lung epithelium by short-term treatment with low concentrations of nanoscale BaSO4 and TiO2 in in vitro experiments. [ABSTRACT FROM AUTHOR]

Background: The alveolar epithelium is exposed to numerous stimuli, such as chemicals, viruses, and bacteria that cause a variety of pulmonary diseases through inhalation. Alveolar epithelial cells (AECs) cultured in vitro are a valuable tool for studying the impacts of these stimuli and developing therapies for associated diseases. However, maintaining the proliferative capacity of AECs in vitro is challenging. In this study, we used a cocktail of three small molecule inhibitors to cultivate AECs: Y-27632, A-83-01, and CHIR99021 (YAC). These inhibitors reportedly maintain the proliferative capacity of several types of stem/progenitor cells. Results: Primary human AECs cultured in medium containing YAC proliferated for more than 50 days (over nine passages) under submerged conditions. YAC-treated AECs were subsequently cultured at the air-liquid interface (ALI) to promote differentiation. YAC-treated AECs on ALI day 7 formed a monolayer of epithelial tissue with strong expression of the surfactant protein-encoding genes SFTPA1, SFTPB, SFTPC, and SFTPD, which are markers for type II AECs (AECIIs). Immunohistochemical analysis revealed that paraffin sections of YAC-treated AECs on ALI day 7 were mainly composed of cells expressing surfactant protein B and prosurfactant protein C. Conclusions: Our results indicate that YAC-containing medium could be useful for expansion of AECIIs, which are recognized as local stem/progenitor cells, in the alveoli. [ABSTRACT FROM AUTHOR]

Since its invention in the late 1980s, the air-liquid-interface (ALI) culture system has been the standard in vitro model for studying human airway biology and pulmonary diseases. However, in a conventional ALI system, cells are cultured on a porous plastic membrane that is much stiffer than human airway tissues. Here, we develop a gel-ALI culture system by simply coating the plastic membrane with a thin layer of hydrogel with tunable stiffness matching that of healthy and fibrotic airway tissues. We determine the optimum gel thickness that does not impair the transport of nutrients and biomolecules essential to cell growth. We show that the gel-ALI system allows human bronchial epithelial cells (HBECs) to proliferate and differentiate into pseudostratified epithelium. Furthermore, we discover that HBECs migrate significantly faster on hydrogel substrates with stiffness matching that of fibrotic lung tissues, highlighting the importance of mechanical cues in human airway remodeling. The developed gel-ALI system provides a facile approach to studying the effects of mechanical cues in human airway biology and in modeling pulmonary diseases. NEW & NOTEWORTHY In a conventional ALI system, cells are cultured on a plastic membrane that is much stiffer than human airway tissues. We develop a gel-ALI system by coating the plastic membrane with a thin layer of hydrogel with tunable stiffness matching that of healthy and fibrotic airway tissues. We discover that human bronchial epithelial cells migrate significantly faster on hydrogel substrates with pathological stiffness, highlighting the importance of mechanical cues in human airway remodeling. [ABSTRACT FROM AUTHOR]

Abstract Background Electronic cigarettes (EC) have gained popularity, especially among young people, with the introduction of fourth-generation devices based on e-liquids containing nicotine salts that promise a smoother vaping experience than freebase nicotine. However, the toxicological effects of nicotine salts are still largely unknown, and the chemical diversity of e-liquids limits the comparison between different studies to determine the contribution of each compound to the cytotoxicity of EC aerosols. Therefore, the aim of this study was to evaluate the toxicological profile of controlled composition e-liquid aerosols to accurately determine the effects of each ingredient based on exposure at the air-liquid interface. Methods Human lung epithelial cells (A549) were exposed to undiluted aerosols of controlled composition e-liquids containing various ratios of propylene glycol (PG)/vegetable glycerin (VG) solvents, freebase nicotine, organic acids, nicotine salts, and flavoured commercial e-liquids. Exposure of 20 puffs was performed at the air-liquid interface following a standard vaping regimen. Toxicological outcomes, including cytotoxicity, inflammation, and oxidative stress, were assessed 24 h after exposure. Results PG/VG aerosols elicited a strong cytotoxic response characterised by a 50% decrease in cell viability and a 200% increase in lactate dehydrogenase (LDH) production, but had no effects on inflammation and oxidative stress. These effects occurred only at a ratio of 70/30 PG/VG, suggesting that PG is the major contributor to aerosol cytotoxicity. Both freebase nicotine and organic acids had no greater effect on cell viability and LDH release than at a 70/30 PG/VG ratio, but significantly increased inflammation and oxidative stress. Interestingly, the protonated form of nicotine in salt showed a stronger proinflammatory effect than the freebase nicotine form, while benzoic acid-based nicotine salts also induced significant oxidative stress. Flavoured commercial e-liquids was found to be cytotoxic at a threshold dose of ≈ 330 µg/cm². Conclusion Our results showed that aerosols of e-liquids consisting only of PG/VG solvents can cause severe cytotoxicity depending on the concentration of PG, while nicotine salts elicit a stronger pro-inflammatory response than freebase nicotine. Overall, aerosols from fourth-generation devices can cause different toxicological effects, the nature of which depends on the chemical composition of the e-liquid.

Abstract The intestinal epithelium is a dynamic barrier that allows the selective exchange of ions, hormones, proteins, and nutrients. To accomplish this, the intestinal epithelium adopts a highly columnar morphology which is partially lost in submerged culturing systems. To achieve this, small intestinal tissue samples were utilized to obtain human intestinal crypts to form enteroids. The Transwell system was subsequently employed to form a monolayer of cells that was cultured in either the submerged condition or the air–liquid Interface (ALI) condition. We found that the human intestinal monolayer under the ALI condition exhibited morphology more similar to the normal intestinal epithelium. F‐actin localization and brush border formation were observed apically, and the integrity of the tight junctions was preserved in the ALI condition. Fewer apoptotic cells were observed in the ALI conditions as compared to the submerged conditions. The monolayer of cells expressed a higher level of secretory cell lineage genes in the ALI condition. The ALI condition positively contributes toward a more differentiated phenotype of epithelial cells. It serves as an amplifier that enhances the existing differentiation cue. The ALI system provides a more differentiated platform to study intestinal function compared to submerged conditions.

Background: Electronic cigarettes (EC) have gained popularity, especially among young people, with the introduction of fourth-generation devices based on e-liquids containing nicotine salts that promise a smoother vaping experience than freebase nicotine. However, the toxicological effects of nicotine salts are still largely unknown, and the chemical diversity of e-liquids limits the comparison between different studies to determine the contribution of each compound to the cytotoxicity of EC aerosols. Therefore, the aim of this study was to evaluate the toxicological profile of controlled composition e-liquid aerosols to accurately determine the effects of each ingredient based on exposure at the air-liquid interface. Methods: Human lung epithelial cells (A549) were exposed to undiluted aerosols of controlled composition e-liquids containing various ratios of propylene glycol (PG)/vegetable glycerin (VG) solvents, freebase nicotine, organic acids, nicotine salts, and flavoured commercial e-liquids. Exposure of 20 puffs was performed at the air-liquid interface following a standard vaping regimen. Toxicological outcomes, including cytotoxicity, inflammation, and oxidative stress, were assessed 24 h after exposure. Results: PG/VG aerosols elicited a strong cytotoxic response characterised by a 50% decrease in cell viability and a 200% increase in lactate dehydrogenase (LDH) production, but had no effects on inflammation and oxidative stress. These effects occurred only at a ratio of 70/30 PG/VG, suggesting that PG is the major contributor to aerosol cytotoxicity. Both freebase nicotine and organic acids had no greater effect on cell viability and LDH release than at a 70/30 PG/VG ratio, but significantly increased inflammation and oxidative stress. Interestingly, the protonated form of nicotine in salt showed a stronger proinflammatory effect than the freebase nicotine form, while benzoic acid-based nicotine salts also induced significant oxidative stress. Flavoured commercial e-liquids was found to be cytotoxic at a threshold dose of ≈ 330 µg/cm². Conclusion: Our results showed that aerosols of e-liquids consisting only of PG/VG solvents can cause severe cytotoxicity depending on the concentration of PG, while nicotine salts elicit a stronger pro-inflammatory response than freebase nicotine. Overall, aerosols from fourth-generation devices can cause different toxicological effects, the nature of which depends on the chemical composition of the e-liquid. [ABSTRACT FROM AUTHOR]

The intestinal epithelium is a dynamic barrier that allows the selective exchange of ions, hormones, proteins, and nutrients. To accomplish this, the intestinal epithelium adopts a highly columnar morphology which is partially lost in submerged culturing systems. To achieve this, small intestinal tissue samples were utilized to obtain human intestinal crypts to form enteroids. The Transwell system was subsequently employed to form a monolayer of cells that was cultured in either the submerged condition or the air–liquid Interface (ALI) condition. We found that the human intestinal monolayer under the ALI condition exhibited morphology more similar to the normal intestinal epithelium. F‐actin localization and brush border formation were observed apically, and the integrity of the tight junctions was preserved in the ALI condition. Fewer apoptotic cells were observed in the ALI conditions as compared to the submerged conditions. The monolayer of cells expressed a higher level of secretory cell lineage genes in the ALI condition. The ALI condition positively contributes toward a more differentiated phenotype of epithelial cells. It serves as an amplifier that enhances the existing differentiation cue. The ALI system provides a more differentiated platform to study intestinal function compared to submerged conditions. [ABSTRACT FROM AUTHOR]

In this study, we compared 12 mm cell culture inserts with permeable polyester membranes (0.4 μm pores) from two different manufacturers: CELLTREAT® and Corning®. Physical dimensions and masses of the inserts were found to be very similar between the two brands, with CELLTREAT® inserts having a slightly smaller diameter and growth area (11.91 mm; 1.11 cm2) compared to Corning® Transwells® (12 mm; 1.13 cm2). We compared cell differentiation outcomes of human nasal epithelial cells (HNECs) at air–liquid interface grown on inserts from the two different manufacturers, including trans‐epithelial electrical resistance, ciliary beat frequency, ciliated area, and gene expression. HNECs from three male donors were used for all endpoints. No statistically significant differences were observed between paired cultures grown on different brands of insert. In conclusion, these inserts are comparable for use with airway epithelial cell model systems and likely do not impact cellular differentiation or cell culture quality. [ABSTRACT FROM AUTHOR]

In recent years, the three‐dimensional (3D) culture system has emerged as a promising preclinical model for tumor research owing to its ability to replicate the tissue structure and molecular characteristics of solid tumors in vivo. This system offers several advantages, including high throughput, efficiency, and retention of tumor heterogeneity. Traditional Matrigel‐submerged organoid cultures primarily support the long‐term proliferation of epithelial cells. One solution for the exploration of the tumor microenvironment is a reconstitution approach involving the introduction of exogenous cell types, either in dual, triple or even multiple combinations. Another solution is a holistic approach including patient‐derived tumor fragments, air‐liquid interface, suspension 3D culture, and microfluidic tumor‐on‐chip models. Organoid co‐culture models have also gained popularity for studying the tumor microenvironment, evaluating tumor immunotherapy, identifying predictive biomarkers, screening for effective drugs, and modeling infections. By leveraging these 3D culture systems, it is hoped to advance the clinical application of therapeutic approaches and improve patient outcomes. [ABSTRACT FROM AUTHOR]

Sulfurous thermal waters (STWs) are used as a complementary treatment for allergic rhinitis. However, there is scant data on the effects of STW on nasal epithelial cells, and in vitro models are warranted. The main aim of this study was to evaluate the dose and time effects of exposure to 3D nasal inserts (MucilAirTM-HF allergic rhinitis model) with STW or isotonic sodium chloride solution (ISCS) aerosols. Transepithelial electrical resistance (TEER) and histology were assessed before and after nebulizations. Chemokine/cytokine levels in the basal supernatants were assessed by enzyme-linked immunosorbent assay. The results showed that more than four daily nebulizations of four or more minutes compromised the normal epithelial integrity. In contrast, 1 or 2 min of STW or ISCS nebulizations had no toxic effect up to 3 days. No statistically significant changes in release of inflammatory chemokines MCP-1/CCL2 > IL-8/CXCL8 > MIP-1α/CCL3, no meaningful release of "alarmins" (IL-1α, IL-33), nor of anti-inflammatory IL-10 cytokine were observed. We have characterized safe time and dose conditions for aerosol nebulizations using a novel in vitro 3D nasal epithelium model of allergic rhinitis patients. This may be a suitable in vitro setup to mimic in vivo treatments of chronic rhinitis with STW upon triggering an inflammatory stimulus in the future. [ABSTRACT FROM AUTHOR]

Assessment of in vitro cytotoxicity is an important component of tobacco product toxicological evaluations. However, current methods of regulatory testing involve exposing monolayer cell cultures to various preparations of aerosols from cigarettes or other emerging products such as electronic nicotine delivery systems (ENDS), which are not representative of human exposure. In the present study, a whole aerosol (WA) system was used to expose lung epithelial cultures (2D and 3D) to determine the potential of six Vuse Alto ENDS products that varied in nicotine content (1.8%, 2.4%, and 5%) and flavors (Golden Tobacco, Rich Tobacco, Menthol, and Mixed Berry), along with a marketed ENDS and a marked cigarette comparator to induce cytotoxicity and oxidative stress. The WA from the Vuse Alto ENDS products was not cytotoxic in the NRU and MTT assays, nor did it activate the Nrf2 reporter gene, a marker of oxidative stress. In summary, Vuse Alto ENDS products did not induce cytotoxic or oxidative stress responses in the in vitro models. The WA exposures used in the 3D in vitro models described herein may be better suited than 2D models for the determination of cytotoxicity and other in vitro functional endpoints and represent alternative models for regulatory evaluation of tobacco products. [ABSTRACT FROM AUTHOR]

[Display omitted] The interaction between inhaled drug-loaded nanoparticles and pulmonary surfactant (PS) is critical for the efficacy and safety of inhaled nanomedicines. Here, we investigated the effect of small interfering RNA (siRNA)-loaded lipid-polymer hybrid nanoparticles (LPNs), which are designed for treatment of lung inflammation, on the physiological function of PS. By using biophysical in vitro methods we show that siRNA-loaded LPNs affect the biophysical function and lateral structure of PS. We used the Langmuir monolayer technique to demonstrate that LPNs display intrinsic surface activity by forming interfacial films that collapse at 49 mN/m, and they competitively inhibit the adsorption and spreading of PS components at the air–liquid interface. However, LPNs are excluded from the interface into the aqueous subphase at surface pressures above 49 mN/m, and hence they overcome the PS monolayer film barrier. Epifluorescence microscopy data revealed that LPNs influence the lateral structure of PS by: (i) affecting the nucleation, shape, and growth of compression-driven segregated condensed PS domains, and (ii) facilitating intermixing of liquid-expanded and tilted-condensed domains. However, the total surface area occupied by a highly condensed phase, presumably enriched in the highly surface tension-reducing dipalmitoylphosphatidylcholine, remained constant upon exposure to LPNs. These results suggest that surface-active LPNs influence the lateral structure of PS during translocation from the interface into the subphase, but LPNs do apparently not affect the biophysical function of PS under physiologically relevant conditions. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to understand how coating with a pulmonary surfactant, namely Alveofact, affects the physicochemical parameters as well as in vitro behavior of polyethylenimine (PEI) polyplexes for pulmonary siRNA delivery. Methods: Alveofact-coated polyplexes were prepared at different Alveofact:PEI coating ratios and analyzed in terms of size, PDI and zeta potential as well as morphology by transmission electron microscopy. The biological behavior was evaluated in a lung epithelial cell line regarding cell viability, cellular uptake via flow cytometry and gene downregulation by qRT-PCR. Furthermore, a 3D ALI culture model was established to test the mucus diffusion and cellular uptake by confocal microscopy as well as gene silencing activity by qRT-PCR. Results: After optimizing the coating process by testing different Alveofact:PEI coating ratios, a formulation with suitable parameters for lung delivery was obtained. In lung epithelial cells, Alveofact-coated polyplexes were well tolerated and internalized. Furthermore, the coating improved the siRNA-mediated gene silencing efficiency. Alveofact-coated polyplexes were then tested on a 3D air-liquid interface (ALI) culture model that, by expressing tight junctions and secreting mucus, resembles important traits of the lung epithelium. Here, we identified the optimal Alveofact:PEI coating ratio to achieve diffusion through the mucus layer while retaining gene silencing activity. Interestingly, the latter underlined the importance of establishing appropriate in vitro models to achieve more consistent results that better predict the in vivo activity. Conclusion: The addition of a coating with pulmonary surfactant to polymeric cationic polyplexes represents a valuable formulation strategy to improve local delivery of siRNA to the lungs. [ABSTRACT FROM AUTHOR]

Background: The neurological effects of the coronavirus disease of 2019 (COVID-19) raise concerns about potential long-term consequences, such as an increased risk of Alzheimer's disease (AD). Neuroinflammation and other AD-associated pathologies are also suggested to increase the risk of serious SARS-CoV-2 infection. Anosmia is a common neurological symptom reported in COVID-19 and in early AD. The olfactory mucosa (OM) is important for the perception of smell and a proposed site of viral entry to the brain. However, little is known about SARS-CoV-2 infection at the OM of individuals with AD. Methods: To address this gap, we established a 3D in vitro model of the OM from primary cells derived from cognitively healthy and AD individuals. We cultured the cells at the air–liquid interface (ALI) to study SARS-CoV-2 infection under controlled experimental conditions. Primary OM cells in ALI expressed angiotensin-converting enzyme 2 (ACE-2), neuropilin-1 (NRP-1), and several other known SARS-CoV-2 receptor and were highly vulnerable to infection. Infection was determined by secreted viral RNA content and confirmed with SARS-CoV-2 nucleocapsid protein (NP) in the infected cells by immunocytochemistry. Differential responses of healthy and AD individuals-derived OM cells to SARS-CoV-2 were determined by RNA sequencing. Results: Results indicate that cells derived from cognitively healthy donors and individuals with AD do not differ in susceptibility to infection with the wild-type SARS-CoV-2 virus. However, transcriptomic signatures in cells from individuals with AD are highly distinct. Specifically, the cells from AD patients that were infected with the virus showed increased levels of oxidative stress, desensitized inflammation and immune responses, and alterations to genes associated with olfaction. These results imply that individuals with AD may be at a greater risk of experiencing severe outcomes from the infection, potentially driven by pre-existing neuroinflammation. Conclusions: The study sheds light on the interplay between AD pathology and SARS-CoV-2 infection. Altered transcriptomic signatures in AD cells may contribute to unique symptoms and a more severe disease course, with a notable involvement of neuroinflammation. Furthermore, the research emphasizes the need for targeted interventions to enhance outcomes for AD patients with viral infection. The study is crucial to better comprehend the relationship between AD, COVID-19, and anosmia. It highlights the importance of ongoing research to develop more effective treatments for those at high risk of severe SARS-CoV-2 infection. [ABSTRACT FROM AUTHOR]

Engineered 3D neural tissues made of neurons and glial cells derived from human induced pluripotent stem cells (hiPSC) are among the most promising tools in drug discovery and neurotoxicology. They represent a cheaper, faster, and more ethical alternative to in vivo animal testing that will likely close the gap between in vitro animal models and human clinical trials. Micro-Electrode Array (MEA) technology is known to provide an assessment of compound effects on neural 2D cell cultures and acute tissue preparations by real-time, non-invasive, and long-lasting electrophysiological monitoring of spontaneous and evoked neuronal activity. Nevertheless, the use of engineered 3D neural tissues in combination with MEA biochips still involves series of constraints, such as drastically limited diffusion of oxygen and nutrients within tissues mainly due to the lack of vascularization. Therefore, 3D neural tissues are extremely sensitive to experimental conditions and require an adequately designed interface that provides optimal tissue survival conditions. A well-suited technique to overcome this issue is the combination of the Air-Liquid Interface (ALI) tissue culture method with the MEA technology. We have developed a full 3D neural tissue culture process and a data acquisition system composed of high-end electronics and novel MEA biochips based on porous, flexible, thin-film membranes integrating recording electrodes, named as “Strip-MEA,” to allow the maintenance of an ALI around the 3D neural tissues. The main motivation of the porous MEA biochips development was the possibility to monitor and to study the electrical activity of 3D neural tissues under different recording configurations, (i) the Strip-MEA can be placed below a tissue, (ii) or by taking advantage of the ALI, be directly placed on top of the tissue, or finally, (iii) it can be embedded into a larger neural tissue generated by the fusion of two (or more) tissues placed on both sides of the Strip-MEA allowing the recording from its inner part. This paper presents the recording and analyses of spontaneous activity from the three positioning configurations of the Strip-MEAs. Obtained results are discussed with the perspective of developing in vitro models of brain diseases and/or impairment of neural network functioning.

Airway epithelium, the first defense barrier of the respiratory system, facilitates mucociliary clearance against inflammatory stimuli, such as pathogens and particulates inhaled into the airway and lung. Inhaled particulate matter 2.5 (PM2.5) can penetrate the alveolar region of the lung, and it can develop and exacerbate respiratory diseases. Although the pathophysiological effects of PM2.5 in the respiratory system are well known, its impact on mucociliary clearance of airway epithelium has yet to be clearly defined. In this study, we used two different 3D in vitro airway models, namely the EpiAirway-full-thickness (FT) model and a normal human bronchial epithelial cell (NHBE)-based air-liquid interface (ALI) system, to investigate the effect of diesel exhaust particles (DEPs) belonging to PM2.5 on mucociliary clearance. RNA-sequencing (RNA-Seq) analyses of EpiAirway-FT exposed to DEPs indicated that DEP-induced differentially expressed genes (DEGs) are related to ciliary and microtubule function and inflammatory-related pathways. The exposure to DEPs significantly decreased the number of ciliated cells and shortened ciliary length. It reduced the expression of cilium-related genes such as acetylated α-tubulin, ARL13B, DNAH5, and DNAL1 in the NHBEs cultured in the ALI system. Furthermore, DEPs significantly increased the expression of MUC5AC, whereas they decreased the expression of epithelial junction proteins, namely, ZO1, Occludin, and E-cadherin. Impairment of mucociliary clearance by DEPs significantly improved the release of epithelial-derived inflammatory and fibrotic mediators such as IL-1β, IL-6, IL-8, GM-CSF, MMP-1, VEGF, and S100A9. Taken together, it can be speculated that DEPs can cause ciliary dysfunction, hyperplasia of goblet cells, and the disruption of the epithelial barrier, resulting in the hyperproduction of lung injury mediators. Our data strongly suggest that PM2.5 exposure is directly associated with ciliary and epithelial barrier dysfunction and may exacerbate lung injury.

There is a need for the assessment of respiratory hazard potential and mode of action of carbon nanotubes (CNTs) before their approval for technological or medical applications. In CNT-exposed lungs, both alveolar macrophages (MФs), which phagocytose CNTs, and alveolar epithelial type II cells (AECII cells), which show tissue injury, are impacted but cell–cell interactions between them and the impacted mechanisms are unclear. To investigate this, we first optimized an air–liquid interface (ALI) transwell coculture of human AECII cell line A549 (upper chamber) and human monocyte cell line THP-1 derived macrophages (lower chamber) in a 12-well culture by exposing macrophages to CNTs at varying doses (5–60 ng/well) for 12–48 h and measuring the epithelial response markers for cell differentiation/maturation (proSP-C), proliferation (Ki-67), and inflammation (IL-1β). In optimal ALI epithelial-macrophage coculture (3:1 ratio), expression of Ki-67 in AECII cells showed dose dependence, peaking at 15 ng/well CNT dose; the Ki-67 and IL-1β responses were detectable within 12 h, peaking at 24–36 h in a time-course. Using the optimized ALI transwell coculture set up with and without macrophages, we demonstrated that direct interaction between CNTs and MФs, but not a physical cell–cell contact between MФ and AECII cells, was essential for inducing immunotoxicity (proliferative and inflammatory responses) in the AECII cells.

Allergic diseases represent an increasing global health problem, among which food and respiratory allergies play an important part. Inhalation of sensitizers from food sources primes the immune system for an exacerbated response upon subsequent exposure via the ingestion route. With the increasing emergence of novel food additives and proteins and growing morbidity in both food and respiratory allergies, the hazard assessment of the allergenicity of food components is of paramount importance. A three-dimensional (3D) alveolar in vitro model for respiratory sensitization prediction was downscaled from the 6- to the 24-well plate insert format, to meet the industry’s high-throughput (HTS) screening requirements. The resemblance of the cellular architecture of the downscaled model to the alveolar region of the lung was evaluated through microscopy techniques and the functionality of the in vitro model was assessed following air-liquid interface (ALI) exposure to ammonium persulfate (APS). The model represents a promising in vitro tool to screen for the respiratory sensitization potential of food components in a fast and reliable approach.

Abstract In this study, we compared 12 mm cell culture inserts with permeable polyester membranes (0.4 μm pores) from two different manufacturers: CELLTREAT® and Corning®. Physical dimensions and masses of the inserts were found to be very similar between the two brands, with CELLTREAT® inserts having a slightly smaller diameter and growth area (11.91 mm; 1.11 cm2) compared to Corning® Transwells® (12 mm; 1.13 cm2). We compared cell differentiation outcomes of human nasal epithelial cells (HNECs) at air–liquid interface grown on inserts from the two different manufacturers, including trans‐epithelial electrical resistance, ciliary beat frequency, ciliated area, and gene expression. HNECs from three male donors were used for all endpoints. No statistically significant differences were observed between paired cultures grown on different brands of insert. In conclusion, these inserts are comparable for use with airway epithelial cell model systems and likely do not impact cellular differentiation or cell culture quality.

Recent laboratory experiments have revealed that important insights into the physical processes involved in the wind-driven generation of surface waves may be obtained by varying the viscosity of the carrying liquid over several orders of magnitude. The present paper reports on the development of a companion approach aimed at studying similar phenomena through numerical simulation, a way expected to remove some of the experimental limitations, especially in the near-interface region, and to allow the relative influence of several physical processes to be assessed by disregarding or inactivating arbitrarily some of them. After reviewing available options, we select and approach based on the combination of a volume of fluid technique to track the evolution of the air–liquid interface, and a two-dimensional Reynolds-averaged version of the Navier–Stokes equations supplemented with a turbulence model to predict the velocity and pressure fields in both fluids. We examine the formal and physical frameworks in which such a time-dependent two-dimensional formulation is meaningful, and close the governing momentum equations with the one-equation Spalart–Allmaras model which directly solves a transport equation for the eddy viscosity. For this purpose, we assume the interface to behave as a rigid wall with respect to turbulent fluctuations in the air, and implement a versatile algorithm to compute the local distance to the interface whatever its shape. We first assess the performance of this model in unseparated and separated single-phase flows over a wavy rigid wall, which are of specific relevance with respect to wind-wave generation. Then, we discuss the initialization protocol used in two-phase simulations, which involves an impulse disturbance with a white noise distribution applied to the interface position. We finally present some examples of interface evolutions obtained at several wind speeds with liquids of various viscosities, and discuss the underlying physics revealed by the associated statistics of interface disturbances, streamline patterns and energy spectra. [ABSTRACT FROM AUTHOR]

Nonmelanoma skin cancers (NMSC) are the most common skin cancers, and about 5.4 million people are diagnosed each year in the United States. A newly developed T-lymphokine-activated killer cell-originated protein kinase (TOPK) inhibitor, HI-TOPK-032, is effective in suppressing colon cancer cell growth, inducing the apoptosis of colon cancer cells and ultraviolet (UV) light-induced squamous cell carcinoma (SCC). This study aimed to investigate the physicochemical properties, permeation behavior, and cytotoxicity potential of HI-TOPK-032 prior to the development of a suitable topical formulation for targeted skin drug delivery. Techniques such as scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, differential scanning calorimetry (DSC), hot-stage microscopy (HSM), X-ray powder diffraction (XRPD), Karl Fisher (KF) coulometric titration, Raman spectrometry, confocal Raman microscopy (CRM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and Fourier transform infrared microscopy were used to characterize HI-TOPK-032. The dose effect of HI-TOPK-032 on in vitro cell viability was evaluated using a 2D cell culture of the human skin keratinocyte cell line (HaCaT) and primary normal human epidermal keratinocytes (NHEKs). Transepithelial electrical resistance (TEER) at the air–liquid interface as a function of dose and time was measured on the HaCAT human skin cell line. The membrane permeation behavior of HI-TOPK-032 was tested using the Strat-M® synthetic biomimetic membrane with an in vitro Franz cell diffusion system. The physicochemical evaluation results confirmed the amorphous nature of the drug and the homogeneity of the sample with all characteristic chemical peaks. The in vitro cell viability assay results confirmed 100% cell viability up to 10 µM of HI-TOPK-032. Further, a rapid, specific, precise, and validated reverse phase-high performance liquid chromatography (RP-HPLC) method for the quantitative estimation of HI-TOPK-032 was developed. This is the first systematic and comprehensive characterization of HI-TOPK-032 and a report of these findings. [ABSTRACT FROM AUTHOR]

The endometrial lining of the uterus is essential for women's reproductive health and consists of several different types of epithelial and stromal cells. Although models such as gland‐like structures (GLSs) and endometrial assembloids (EnAos) are successfully established, they lack an intact luminal epithelium, which makes it difficult to recapitulate endometrial receptivity. Here, a novel EnAo model (ALI‐EnAo) is developed by combining endometrial epithelial cells (EnECs) and stromal cells (EnSCs) and using an improved matrix and air–liquid interface (ALI) culture method. ALI‐EnAos exhibit intact EnSCs and glandular and luminal epithelia, which recapitulates human endometrium anatomy, cell composition, hormone‐induced menstrual cycle changes, gene expression profiles, and dynamic ciliogenesis. The model suggests that EnSCs, together with the extracellular matrix and ALI culture conditions, contribute to EnAo phenotypes and characteristics reflective of the endometrial menstrual cycle. This enables to transcriptionally define endometrial cell subpopulations. It anticipates that ALI‐EnAos will facilitate studies on embryo implantation, and endometrial growth, differentiation, and disease. [ABSTRACT FROM AUTHOR]

We examine the classical problem of the height of a static liquid interface that forms on the outside of a solid vertical cylinder in an unbounded stagnant pool exposed to air. Gravitational and surface tension forces compete to affect the interface shape as characterized by the Bond number. Here, we provide a convergent power series solution for interface shapes that rise above or fall below the horizontal pool as a function of contact angle and Bond number. We find that the power series solution expressed in terms of the radial distance from the wall is divergent, and thus rewrite the divergent series as a new power series expressed as powers of an Euler transformed variable; this series is modified to match the large distance asymptotic behaviour of the meniscus. The Euler transformation maps non-physical singularities to locations that do not restrict series convergence in the physical domain, while the asymptotic modification increases the rate of convergence of the series overall. We demonstrate that when the divergent series coefficients are used to implement the Euler transformation, finite precision errors are incurred, even for a relatively small number of terms. To avoid such errors, the independent variable in the governing differential equation is changed to that of the Euler transform, and the power series is developed directly without using the divergent series. The resulting power series solution is validated by comparison with a numerical solution of the interface shape and the small Bond number matched asymptotic solution for the height of the interface along the cylinder developed by Lo (1983, J. Fluid Mech. 132, p.65-78). The convergent power series expansion has the ability to exceed the accuracy of the matched asymptotic solution for any Bond number given enough terms, and the recursive nature of the solution makes it straightforward to implement. [ABSTRACT FROM AUTHOR]

Meibomian gland dysfunction (MGD) is a group of disorders linked by functional abnormalities of the meibomian glands. Current studies on MGD pathogenesis focus on meibomian gland cells, providing information on a single cell's response to experimental manipulation, and do not maintain the architecture of an intact meibomian gland acinus and the acinar epithelial cells' secretion state in vivo. In this study, rat meibomian gland explants were cultured by a Transwell chamber-assisted method under an air-liquid interface (airlift) in vitro for 96 h. Analyses for tissue viability, histology, biomarker expression, and lipid accumulation were performed with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and TUNEL assays, hematoxylin and eosin (H&E) staining, immunofluorescence, Quantitative real-time reverse transcription polymerase chain reaction (qRT-PCR), transmission electron microscopy (TEM), and western blotting (WB). MTT, TUNEL, and H&E staining indicated better tissue viability and morphology than the submerged conditions used in previous studies. Levels of MGD biomarkers, including keratin 1 (KRT1) and 14 (KRT14) and peroxisome proliferator-activated receptor-gamma (PPAR-γ), along with oxidative stress markers, including reactive oxygen species, malondialdehyde, and 4-hydroxy-2-nonenal, gradually increased over culture time. The MGD pathophysiological changes and biomarker expression of meibomian gland explants cultured under airlift conditions were similar to those reported by previous studies, indicating that abnormal acinar cell differentiation and glandular epithelial cell hyperkeratosis may contribute to obstructive MGD occurrence. [ABSTRACT FROM AUTHOR]

Previous research has indicated that ultrafine particles (UFPs, particles less than 100 nm) emitted from desktop three-dimensional (3D) printers exhibit cytotoxicity. However, only a limited number of particles from different filaments and their combinations have been tested for cytotoxicity. This study quantified the emissions of UFPs from a commercially available filament extrusion desktop 3D printer using three different filaments, including acrylonitrile butadiene Styrene (ABS), thermoplastic polyurethane (TPU), and polyethylene terephthalate glycol (PETG). In this study, controlled experiments were conducted where the particles emitted were used to expose cells grown in an air-liquid interface (ALI) system. The ALI exposures were utilized for in vitro characterization of particle mixtures, including UFPs from a 3D printer. Additionally, a lactate dehydrogenase (LDH) assay was used to evaluate the cytotoxic effects of these UFPs. A549 cells were exposed at the ALI to UFPs generated by an operational 3D printer for an average of 45 and 90 min. Twenty-four hours post-exposure, the cells were analyzed for percent cytotoxicity in a 24-well ALI insert (LDH assay). UFP exposure resulted in diminished cell viability, as evidenced by significantly increased LDH levels. The findings demonstrate that ABS has the most significant particle emission. ABS was the only filament that showed a significant difference compared to the high efficiency particulate arrestance (HEPA) following 90 min of exposure (p-value < 0.05). Both ABS and PETG exhibited a significant difference compared to the HEPA control after 45 min of exposure. A preliminary analysis of potential exposure to these products in a typical environment advises caution when operating multiple printer and filament combinations in poorly ventilated spaces or without combined gas and particle filtration systems. [ABSTRACT FROM AUTHOR]