Search

Bonding dissimilar elements to provide synergistic effects is an effective way to improve the performance of metal catalysts. However, as the properties become more dissimilar, achieving synergistic effects effectively becomes more difficult due to phase separation. Here we describe a comprehensive study on how subnanoscale alloying is always effective for inter-elemental synergy. Thirty-six combinations of both bimetallic subnanoparticles (SNPs) and nanoparticles (NPs) were studied systematically using atomic-resolution imaging and catalyst benchmarking based on the hydrogen evolution reaction (HER). Results revealed that SNPs always produce greater synergistic effects than NPs, the greatest synergistic effect was found for the combination of Pt and Zr. The atomic-scale miscibility and the associated modulation of electronic states at the subnanoscale were much different from those at the nanoscale, which was observed by annular-dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray photoelectron spectroscopy (XPS), respectively.

For exploitation of a new class of aromatic micelles, we synthesized a bent pentacene-based amphiphilic molecule through Diels-Alder reaction. The amphiphiles bearing two trimethylammonium tethers assemble into a spherical aromatic micelle, with an average core diameter of 1.5 nm, in water at room temperature. The new aromatic micelle efficiently encapsulates perylene bisimide (PBI) dyes and graphene nanosheets (GNS) in water. The encapsulated PBI dyes form a parallel stacked dimer, exhibiting characteristic absorption and emission bands. In addition, the encapsulated GNS are composed of few-layer graphene sheets with an average lateral size of ∼7 nm, as confirmed by Raman spectroscopy. The resultant, aqueous host-guest complexes are stable even after three weeks in water under ambient conditions.

Subnanometric metal particles exhibit anomalous chemical activity, suggesting innovative applications as next-generation materials. However, a precise synthesis and detailed characterisation of these subnano-materials remain a major challenge. Here we summarise recent works on the synthesis of size-controlled tin (Sn) oxide subnanoparticles (SNPs) using the dendrimer template method, and on their detailed characterisation. Size-controlled Sn oxide SNPs (Sn12, Sn28 and Sn60) have been synthesised and they showed a size-dependent compositional change containing not only stable Sn(iv) states but also metastable Sn(ii) states so as to form subnano-scaled particle shapes. Detailed vibrational characterisation of SNPs was achieved by employing subnano-sensitive Raman spectroscopy for spectroscopic characterisation. Combined with density functional theory studies, the inherent subnano-structures of Sn oxide SNPs have been elucidated for the first time. Furthermore, the size-dependent activity of Sn oxide SNPs upon CO oxidation was rationally explained from the simulated structure of Sn oxide SNPs. A detailed understanding of the chemical and physical nature of subnano-materials facilitates the rational design of SNPs for practical applications such as catalysis, biosensors, and electronics.

Borophene and the analogs are attractive 2D-materials showing unique mechanical and electronic properties. In this study, the bottom-up synthesis of an atomic boron network possessing a completely planar skeleton was achieved from KBH4. The borophene-analog was stabilized by oxygen atoms positioned on the same plane, providing holes and the anionic state of the layer. Potassium cations between the layers enabled crystalline stacking of the layers, as well as dissolution in solvents as atomically thin layers. The conductivity measurements revealed the electronic feature. Unlike the interplane conducting property, almost zero activation energy like a metal was suggested from the in-plane measurement.

In this paper we combine two operando methods, Raman spectroscopy and X-ray absorption spectroscopy (XAS), in order to probe reduced graphene-oxide supported tinIV oxide nanoparticles ( SnO 2 NPs @ rGO ) as they are being used to catalyse CO2 electroreduction. To achieve high reaction rates it is necessary to apply sufficiently cathodic electrode potentials. Under such conditions, however, not only CO2 is reduced electrochemically, but also the catalyst particles may be transformed from the initial SnIV state to SnII or, in an extreme case, to metallic Sn. While SnII species still favour CO2 electroreduction, yielding formate as a primary product, on metallic Sn CO2 reduction is disfavoured with respect to the competing hydrogen evolution reaction (HER). We show that operando XAS, a robust technique yielding information averaged over a large surface area and a relatively large thickness of the catalyst layer, is a very expedient method able to detect the reduction of SnO 2 NPs @ rGO to metallic Sn. XAS can thus be used to establish an optimum potential for the electroreduction in practical electrolysing cells. It takes, however, a complementary method offered by operando Raman spectroscopy, having greater sensitivity at the catalyst/electrolyte solution interface, to probe reduction intermediates such as the SnII state, which remain undetectable for ex situ methods. As it is shown in the paper, Raman spectroscopy may also find further use when investigating the recovery of catalyst particles following exposure to extreme reducing conditions.

Subnanoclusters were characterized by elaborated spectroscopic methods revealing distinctive natures of subnanomaterials., Subnanometric metal clusters exhibit anomalous catalytic activity, suggesting innovative applications as next-generation materials, although identifying and characterizing these subnanomaterials in atomic detail remains a substantial challenge because of the severely weak signal intensity for the conventional analytical methods. Here, we report a subnanosensitive vibrational technique established based on the surface-enhanced Raman spectroscopy, demonstrating the first-ever detailed vibrational characterization of subnanomaterials. Furthermore, combining with density functional theory calculations, we reveal that inherent surface structures of the tin oxide subnanoclusters determine the size-specific spectral and catalytic characteristics of these clusters. The high-sensitivity characterization methodology elaborated here can provide a comprehensive understanding of the chemical and structural natures of subnanomaterials, which facilitate the rational design of subnanomaterials on the atomic scale for practical applications, such as in catalysts, biosensors, and electronics.

Formation of nanospheres that consist of π-conjugated dendrimers (phenylazomethine and carbazole) is reported. The nanospheres can be prepared by spin-casting a solution of dendrimers in a proper g...

The promoting effect of water on the electrochemical reduction of carbon dioxide (CO2) from non-aqueous solvents has been studied by means of cyclic voltammetry and in-situ surface-enhanced infrared absorption spectroscopy (SEIRAS). CO2 electroreduction on gold is known to be highly selective towards CO formation in aqueous and in non-aqueous media. The use of non-aqueous solvents is advantageous due to the significantly increased solubility of CO2 compared to aqueous systems. However, in the absence of any proton source, extremely high overpotentials are required for the CO2 electroreduction. In this work, we demonstrate for the first time a tremendous accelerating effect of water additives on the electroreduction of CO2 taking place at gold/acetonitrile interfaces. Already moderate amounts of water, in the concentration range of 0.5 to 0.7 M, are sufficient to decrease significantly the overpotential of CO2 reduction while keeping the CO2 concentration as high as in the pure acetonitrile. The effect of water additives on the mechanism of CO2 electroreduction on gold is discussed on the basis of electrochemical and IR spectroscopic data. The results obtained from gold are compared to analogue experiments carried out on platinum.

Spherical atoms have the highest geometrical symmetry. Due to this symmetry, atomic orbitals are highly degenerate, leading to closed-shell stability and magnetism. No substances with greater degrees of degeneracy are known, due to geometrical limitations. We now propose that realistic magnesium, zinc, and cadmium clusters having a specific tetrahedral framework possess anomalous higher-fold degeneracies than spherical symmetry. Combining density functional theory calculations with simple tight-binding models, we demonstrate that these degeneracies can be attributed to dynamical symmetry. The degeneracy condition is fully identified as an elegant mathematical sequence involving interatomic parameters. The introduction of dynamical symmetry will lead to the discovery of a novel category of substances with super-degenerate orbitals.

Geobacter sulfurreducens (Gs) attachment and biofilm formation on self-assembled monolayers (SAMs) of carboxyl-terminated alkanethiol linkers with varied chain length on gold (Au) was investigated by electrochemical and microscopic methods to elucidate the effect of the surface modification on the current production efficiency of Gs cells and biofilms. At the initial stage of the cell attachment, the electrochemical activity of Gs cells at a submonolayer coverage on the SAM-Au surface was independent of the linker length. Subsequently, multiple potential cyclings indicated that longer linkers provided more biocompatible conditions for Gs cells than shorter ones. For Gs biofilms, on the other hand, the turnover current decreased exponentially with the linker length. During the biofilm formation, bacteria need to adjust from the initial planktonic state to an electrode-respiring state, which was triggered by a strong electrochemical stress found for shorter linkers, resulting in the formation of mature biofilms. Our results suggest that the initial cell attachment and the biofilm formation are two inherently different processes. Therefore, the effects of linker molecules, electron transfer efficiency and biocompatibility, must be explored simultaneously to understand both processes to increase the current production of electrogenic microorganisms in microbial fuel cells.

A major concern of electrocatalysis research is to assess the structural and chemical changes that a catalyst may itself undergo in the course of the catalyzed process. These changes can influence not only the activity of the studied catalyst but also its selectivity toward the formation of a certain product. An illustrative example is the electroreduction of carbon dioxide on tin oxide nanoparticles, where under the operating conditions of the electrolysis (that is, at cathodic potentials), the catalyst undergoes structural changes which, in an extreme case, involve its reduction to metallic tin. This results in a decreased Faradaic efficiency (FE) for the production of formate (HCOO–) that is otherwise the main product of CO2 reduction on SnOx surfaces. In this study, we utilized potential- and time-dependent in operando Raman spectroscopy in order to monitor the oxidation state changes of SnO2 that accompany CO2 reduction. Investigations were carried out at different alkaline pH levels, and a strong co...

Rh modified Au(111-25 nm) electrodes, prepared by electron beam evaporation and galvanostatic deposition, were employed to study adsorption and electro-oxidation of CO on Rh in 0.1 M sulfuric acid solution by in situ attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). The results of ATR-SEIRAS experiments were compared with those obtained by infrared reflection absorption spectroscopy on three low-index Rh single crystal surfaces. The Rh film deposited on Au(111-25 nm) electrode consists of 3D clusters forming a highly stepped [n(111) × (111)]-like surface with narrow (111) terraces. When CO was dosed at the hydrogen adsorption potential region, CO adsorbed in both atop (COL) and bridge (COB) configurations, as well as coadsorbed water species, were detected on the Rh film electrode. A partial interconversion of spectroscopic bands due to the CO displacement from bridge to atop sites was found during the anodic potential scan, revealing that there is a potential-dependent preference of CO adsorption sites on Rh surfaces. Our data indicate that CO oxidation on Rh electrode surface in acidic media involves coadsorbed water and follows the nucleation and growth model of a Langmuir-Hinshelwood type reaction. The work was supported by the Research Center Jülich, the University of Bern, Swiss National Science Foundation (200020_144471, 200021-124643), the Spanish Ministerio de Economía y Competitividad (project CTQ2013-44083-P) and University of Alicante. QX acknowledges fellowships of the Research Center Jülich; IP acknowledges support by COST Action TD 1002; and AK acknowledges the financial support by CTI Swiss Competence Centers for Energy Research (SCCER Heat and Electricity Storage).

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cyclic voltammetry (CV), UV-Visible (UV-Vis) and Raman spectroscopy showed a linear increase of peak current, absorbance and Raman intensities, respectively with the number of layers. These results indicate the formation of well-ordered multilayers of the ruthenium complex on ITO, which is further supported by the X-ray photoelectron spectroscopy analysis. The thickness of the layers can be controlled with nanometer precision. In particular, the thickest layer studied (65 molecular layers and approx. 120 nm thick) demonstrated fast electrochemical oxidation/reduction, indicating a very low attenuation of the charge transfer within the multilayer. In situ-UV-Vis and resonance Raman spectroscopy results demonstrated the reversible electrochromic/redox behavior of the ruthenium complex multilayered films on ITO with respect to the electrode potential, which is an ideal prerequisite for e.g. smart electrochemical energy storage applications. Galvanostatic charge-discharge experiments demonstrated a pseudocapacitor behavior of the multilayer film with a good specific capacitance of 92.2 F g(-1) at a current density of 10 μA cm(-2) and an excellent cycling stability. As demonstrated in our prototypical experiments, the fine control of physicochemical properties at nanometer scale, relatively good stability of layers under ambient conditions makes the multilayer coatings of this type an excellent material for e.g. electrochemical energy storage, as interlayers in inverted bulk heterojunction solar cell applications and as functional components in molecular electronics applications.

The ability of Geobacter species to transfer electrons outside the cell enables them to play an important role in a number of biogeochemical and bioenergy processes. Gene deletion studies have implicated periplasmic and outer-surface c-type cytochromes in this extracellular electron transfer. However, even when as many as five c-type cytochrome genes have been deleted, some capacity for extracellular electron transfer remains. In order to evaluate the role of c-type cytochromes in extracellular electron transfer, Geobacter sulfurreducens was grown in a low-iron medium that included the iron chelator (2,2'-bipyridine) to further sequester iron. Haem-staining revealed that the cytochrome content of cells grown in this manner was 15-fold lower than in cells exposed to a standard iron-containing medium. The low cytochrome abundance was confirmed by in situ nanoparticle-enhanced Raman spectroscopy (NERS). The cytochrome-depleted cells reduced fumarate to succinate as well as the cytochrome-replete cells do, but were unable to reduce Fe(III) citrate or to exchange electrons with a graphite electrode. These results demonstrate that c-type cytochromes are essential for extracellular electron transfer by G. sulfurreducens. The strategy for growing cytochrome-depleted G. sulfurreducens will also greatly aid future physiological studies of Geobacter species and other microorganisms capable of extracellular electron transfer.

We present an experimental study of the CO electro-oxidation on Pt(100)-(1 × 1) electrodes employing electrochemical methods in combination with in situ scanning tunneling microscopy (STM) and shell-isolated nanoparticle enhanced Raman spectroscopy (SHINERS). We discussed the nature and stability of the active sites in the preignition region in the presence of dissolved CO (COb) and monitored substrate structure changes during the COb electro-oxidation process. We corroborated that the electro-oxidation kinetics is determined decisively by the history of CO adlayer formation. A new mechanism was proposed for Pt(100) electrode deactivation in the preignition region after excursion of electrode potential to COb ignition region. We believe that this mechanism takes place on Pt surfaces independently on their crystallographic orientation.

Perchlorate adsorption on Au(1 1 1) was investigated by cyclic voltammetry and surface-enhanced infrared absorption spectroscopy. We found that the electrosorption valency of ClO4− on Au(1 1 1) is ∼ 0.6 and the total coverage of ClO4− on Au(1 1 1) is higher (∼ 0.15) than previously estimated (∼ 0.04). Based on the experimental adsorption isotherms obtained from infrared spectra and the reconstruction-free cyclic voltammograms, we proposed a mechanism for the ClO4− adsorption on Au(1 1 1).

Variations of the surface structure and composition of the Au(110) electrode during the formation/lifting of the surface reconstruction and during the surface oxidation/reduction in 0.1 M aqueous sulfuric acid were studied by cyclic voltammetry, scanning tunneling microscopy and shell-isolated nanoparticle enhanced Raman spectroscopy. Annealing of the Au(110) electrode leads to a thermally-induced reconstruction formed by intermixed (1×3) and (1×2) phases. In a 0.1 M H2SO4 solution, the decrease of the potential of the atomically smooth Au(110)-(1×1) surface leads to the formation of a range of structures with increasing surface corrugation. The electrochemical oxidation of the Au(110) surface starts by the formation of anisotropic atomic rows of gold oxide. At higher potentials we observed a disordered structure of the surface gold oxide, similar to the one found for the Au(111) surface.

We carried out a comprehensive study of Au(1 1 1) oxidation–reduction in the presence of (hydrogen-) sulfate ions on ideally smooth and stepped Au(S)[n(1 1 1)-(1 1 1)] single crystal electrodes using cyclic voltammetry, in situ scanning tunneling microscopy (STM) and vibration spectroscopy, such as surface-enhanced infrared absorption spectroscopy (SEIRAS) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Surface structure changes and the role of surface defects in the potential regions of double layer charging and gold oxidation/reduction are discussed based on cyclic voltammetry and in situ STM data. SEIRAS and SHINERS provide complementary information on the chemical nature of adsorbates. In particular, the potential-dependent formation and stability ranges of adsorbed sulfate, hydroxide-species and of gold surface oxide could be resolved in detail. Based on our experimental observations, we proposed new and extended mechanisms of gold surface oxidation and reduction in 1.0 M H2SO4 and 1.0 M Na2SO4.

Electrochemical reactivity and structure properties of electrogenic bacteria, Geobacter sulfurreducens (Gs) were studied to explore the heterogeneous electron transfer at the bacteria/electrode interface using electrochemical and in-situ spectroscopic techniques. The redox behavior of Gs adsorbed on a gold electrode, which is modified with a ω-functionalized self-assembled monolayer (SAM) of alkanethiols, depends strongly on the terminal group. The latter interacts directly with outermost cytochromes embedded into the outer membrane of the Gs cells. The redox potential of bacterial cells bound electrostatically to a carboxyl-terminated SAM is close to that observed for bacteria attached to a bare gold electrode, revealing a high electronic coupling at the cell/SAM interface. The redox potentials of bacterial cells adsorbed on amino- and pyridyl-terminated SAMs are significantly different suggesting that the outermost cytochromes changes their conformation upon adsorption on these SAMs. No redox activity of Gs was found with CH3-, N(CH3)3+- and OH-terminated SAMs. Complementary in-situ spectroscopic studies on bacteria/SAMs/Au electrode assemblies were carried out to monitor structure changes of the bacterial cells upon polarization. Spectro-electrochemical techniques revealed the electrochemical turnover of the oxidized and reduced states of outer membrane cytochromes (OMCs) in Gs, providing evidence that the OMCs are responsible for the direct electron transfer to metal electrodes, such as gold or silver, during the electricity production. Furthermore, we observed spectroscopic signatures of the native structure of the OMCs and no conformational change during the oxidation/reduction process of the microorganisms. These findings indicate that the carboxyl-anchoring group provides biocompatible conditions for the outermost cytochromes of the Gs, which facilitate the heterogeneous electron transfer at the microorganism/electrode interface.

A novel, low cost polymer electrolyte membrane for direct methanol fuel cell (DMFC) has been fabricated using the pore-filling technique with copolymer composed of poly-2-acrylamide-2-methylpropanesulphonic acid (PAMPS) and poly-styrene sulphonic acid (PSS) impregnated in a porous polyimide (PI) substrate. The pore-filling membranes, as well as a Nafion membrane as a reference, were subjected to proton conductivity, methanol permeability and DMFC performance tests at various methanol concentrations to understand the effect of ion-conductive copolymer component towards the DMFC applications. PAMPS–PSS pore-filling membranes showed a decrease in methanol permeability whilst they retained their proton conductivity, consequently improving the DMFC performance compared to commercial Nafion membrane. The steric and hydrophobic properties of PSS allow to improve methanol crossover, achieving high DMFC performance in methanol concentration up to 5 mol L−1, demonstrating that PAMPS–PSS pore-filling membranes are attractive for the DMFC applications.

The electrochemical reduction of CO(2) has been extensively studied over the past decades. Nevertheless, this topic has been tackled so far only by using a very fundamental approach and mostly by trying to improve kinetics and selectivities toward specific products in half-cell configurations and liquid-based electrolytes. The main drawback of this approach is that, due to the low solubility of CO(2) in water, the maximum CO(2) reduction current which could be drawn falls in the range of 0.01-0.02 A cm(-2). This is at least an order of magnitude lower current density than the requirement to make CO(2)-electrolysis a technically and economically feasible option for transformation of CO(2) into chemical feedstock or fuel thereby closing the CO(2) cycle. This work attempts to give a short overview on the status of electrochemical CO(2) reduction with respect to challenges at the electrolysis cell as well as at the catalyst level. We will critically discuss possible pathways to increase both operating current density and conversion efficiency in order to close the gap with established energy conversion technologies.

On Au(111) electrodes, the investigation of ClO4− adsorption is hampered by a simultaneous surface reconstruction. We demonstrate that these two processes can be decoupled in cyclic voltammograms by a proper choice of the scan rate and of the initial potential. Our approach allowed the establishment of a relation between potentials of zero charge for the reconstructed and unreconstructed Au(111) surfaces. Keywords: Au(111), Perchlorate adsorption, Surface reconstruction, pzc, SEIRAS

It is shown that the Pd(1 1 1) and Au(1 1 1) surfaces with wide atomically flat terraces having widths in a range of 2–10 μm can be prepared by annealing in an argon stream. These surfaces were investigated by a laser confocal microscope combined with a differential interference contrast microscope (LCM–DIM). It is remarkable that regularly aligned step lines are clearly discerned in electrolyte solutions. The step lines observed by LCM–DIM are monatomic steps confirmed by scanning tunneling microscopy and atomic force microscopy. It is expected that LCM–DIM is a new powerful in situ method for the investigation of electrochemical reactions with the capability of atomic layer resolution.

Oxygen reduction on Pt single crystal surfaces has been studied in acidic media using a hanging meniscus rotating disk electrode configuration to understand the effect of crystal orientation of the electrode toward electron transfer reactions. The surfaces used belong to the [ 1 1 ¯ 0 ] zone that can be classified in two different series, i.e. surfaces with (1 1 1) terraces separated by monatomic (1 1 0) steps and surfaces with (1 1 0) terraces and (1 1 1) steps. Both in sulphuric and perchloric acid solutions, the Pt(1 1 1) surface showed the lowest catalytic activity among those studied. Conversely, in agreement with the results reported previously on Pt surfaces belonging to the [ 0 1 1 ¯ ] zone [M.D. Macia, J.M. Campina, E. Herrero, J.M. Feliu, J. Electroanal. Chem. 564 (2004) 141], stepped surfaces, irrespectively to their step site symmetry, show higher catalytic activity on oxygen reduction than those on basal low-index surfaces. The effect on the structure sensitivity on the electrocatalytic activity is discussed in relation to the role of adsorbed species, such as hydrogen, oxygen, OH, electrolyte anions and oxide formation.

Copper underpotential deposition (Cu upd) studies have been carried out on flat and stepped Au single crystal surfaces to demonstrate the influence of crystal orientation on Cu upd characteristics. Seven different Au single crystal surfaces were employed, Au(1 1 1), Au(1 1 0), Au(1 0 0), Au(5 5 4), Au(7 7 5), Au(3 3 2) and Au(7 5 5). Voltammetric contributions for Cu upd at both (1 1 0) and (1 0 0) oriented steps were similar to those on the extended (1 1 0) and (1 0 0) surfaces. In contrast, the formation of the ( 3 × 3 ) R30° structure on (1 1 1) terraces is strongly dependent on their width. An increase in step density and the corresponding reduction in (1 1 1) terrace width favour the ( 3 × 3 ) R30° → (1 × 1) phase transition. This could result from the influence of structural or electronic (Smoluchowski) effects on the energetics and/or kinetics of the phase transition.

Electrolyte cations and anions in aqueous solutions are hydrogen bond breaker. We found that most of anions are strong hydrogen bond breaker whereas cations are not. Further, the electro-reduction of Mg(H2O)6(2+) to Mg(OH)2 and the growth of the Mg(OH)2 were observed on Au electrode surface at negative electrode potential. Water molecules in an electric double layer exhibit an ordered and a disordered structure at negative and pzc (point of zero charge) potentials, respectively. Therefore, electrode potential polarization (negative or pzc potential application) from an equilibrium potential operates an electrified interface to cause increased or decreased ordering, orientation and charge transfer of water molecules as well as dissociation of water on the electrode surface.

The bioelectrocatalytic (oxygen reduction reaction, ORR) properties of the multicopper oxidase CueO immobilized on gold electrodes were investigated. Macroscopic electrochemical techniques were combined with in situ scanning tunneling microscopy (STM) and surface-enhanced Raman spectroscopy at the ensemble and at the single-molecule level. Self-assembled monolayer of mercaptopropionic acid, cysteamine, and p-aminothiophenol were chosen as redox mediators. The highest ORR activity was observed for the protein attached to amino-terminated adlayers. In situ STM experiments revealed that the presence of oxygen causes distinct structure and electronic changes in the metallic centers of the enzyme, which determine the rate of intramolecular electron transfer and, consequently, affect the rate of electron tunneling through the protein. Complementary Raman spectroscopy experiments provided access for monitoring structural changes in the redox state of the type 1 copper center of the immobilized enzyme during the CueO-catalyzed oxygen reduction cycle. These results unequivocally demonstrate the existence of a direct electronic communication between the electrode substrate and the type 1 copper center. Financial support from the Spanish Ministerio de Ciencia e Innovacion (CTQ2010−18570) and Generalitat Valenciana (ACOMP/2013/073) is gratefully acknowledged. The work in Bern was supported by the European Union through the FP7 BacWire Project (Contract MNP4-SL-2009-229337), the CTIProject 13696.1 PFFLR-IV, and the University of Bern through a summer fellowship to V.C.

A direct electron transfer process between bacterial cells of electrogenic species Geobacter sulfurreducens (Gs) and electrified electrode surfaces was studied to exploit the reactivity of Gs submonolayers on gold and silver surfaces. A submonolayer of Gs was prepared and studied to explore specifically the heterogeneous electron transfer properties at the bacteria/electrode interface. In situ microscopic techniques characterised the morphology of the Gs submonolayers under the operating conditions. In addition, complementary in situ spectroscopic techniques that allowed us to access in situ molecular information of the Gs with high surface selectivity and sensitivity were employed. The results provided clear evidence that the outermost cytochrome C in Gs is responsible for the heterogeneous electron transfer, which is in direct contact with the metal electrode. Feasibility of single cell in situ studies under operating conditions was demonstrated where the combination of surface-electrochemical tools at the nano- and micro-scale with microbiological approaches can offer unique opportunities for the emerging field of electro-microbiology to explore processes and interactions between microorganisms and electrical devices.

The ability of Geobacter species to transfer electrons outside the cell enables them to play an important role in a number of biogeochemical and bioenergy processes. Gene deletion studies have implicated periplasmic and outer-surface c-type cytochromes in this extracellular electron transfer. However, even when as many as five c-type cytochrome genes have been deleted, some capacity for extracellular electron transfer remains. In order to evaluate the role of c-type cytochromes in extracellular electron transfer, Geobacter sulfurreducens was grown in a low-iron medium that included the iron chelator (2,2'-bipyridine) to further sequester iron. Haem-staining revealed that the cytochrome content of cells grown in this manner was 15-fold lower than in cells exposed to a standard iron-containing medium. The low cytochrome abundance was confirmed by in situ nanoparticle-enhanced Raman spectroscopy (NERS). The cytochrome-depleted cells reduced fumarate to succinate as well as the cytochrome-replete cells do, but were unable to reduce Fe(III) citrate or to exchange electrons with a graphite electrode. These results demonstrate that c-type cytochromes are essential for extracellular electron transfer by G. sulfurreducens. The strategy for growing cytochrome-depleted G. sulfurreducens will also greatly aid future physiological studies of Geobacter species and other microorganisms capable of extracellular electron transfer.

The methanol oxidation on a hydroxylated Pt (Pt(111)-OH) surface has been investigated by means of infrared reflection absorption spectroscopy (IRAS) in ultra-high vacuum (UHV) and in acidic solution. The Pt(111)-OH surface in UHV was prepared by introducing water molecules on a Pt(111)-(2 x 2)-O surface and annealed at temperature higher than 160 K. Methanol was then, introduced to the Pt(111)-OH surface to show the dependence of the reaction intermediate on the annealing temperature. At an annealing temperature below 160 K, IR bands assignable to methanol overlayer were observed and no detectable intermediates, such as CO, formaldehyde and formate, were formed, suggesting that methanol molecules remain stable on Pt(111) surface without dissociation at this temperature region. At an annealing temperature above 160 K, on the other hand, CO and formate were observed. In addition, the oxidation of CO on Pt(111)-OH showed no sign of formate formation, indicating that formate is not derived from CO, but from a direct oxidation of methanol. Methanol oxidation was carried out in 0.1 mol dm(-3) HClO(4) solution on Pt(111) with a flow cell configuration and showed the formation of formate. These results indicate that the formate is the dominant non-CO intermediate both in UHV and in acidic solution, and the preadsorbed oxygen-containing species, in particular OH adsorbates, on Pt(111) surface plays a very important role in the formate formation process in methanol oxidation reaction.

Interface engineering to attain a uniform and compact self-assembled monolayer at atomically flat surfaces plays a crucial role in the bottom-up fabrication of organic molecular devices. Here we report a promising and operationally simple approach for modification/functionalization not only at ultraflat single-crystal metal surfaces, M(111) (M=Au, Pt, Pd, Rh and Ir) but also at the highly oriented pyrolytic graphite surface, upon efficient in situ cleavage of trimethylsilyl end groups of the molecules. The obtained self-assembled monolayers are ultrastable within a wide potential window. The carbon–surface bonding on various substrates is confirmed by shell-isolated nanoparticle-enhanced Raman spectroscopy. Application of this strategy in tuning surface wettability is also demonstrated. The most valuable finding is that a combination of the desilylation with the click chemistry represents an efficient method for covalent and tailor-made functionalization of diverse surfaces., Formation of stable and uniform self-assembled monolayers on surfaces is a prerequisite for bottom-up fabrication of many organic molecular devices. Here, the authors present a fabrication approach based on desilylation chemistry for modification and functionalization on various metal and carbon surfaces.

IR light irradiation of a mixed toluene solution of ammonium salt-stabilized gold nanoparticles with 3.8 ± 0.8 nm core diameter and a porphyrin thioacetate derivative affords a thin photoactive film of the cluster–porphyrin network.

not Available.

not Available.

Fullerene is strongly adsorbed on both single crystal and polycrystalline gold surfaces and its specific adsorption resulted in the formation of high coverage large hexagonal rafts with strong interactions between the adsorbed fullerene molecules and the Au substrate. The oxygen reduction reaction (ORR) was investigated on these surfaces to determine their influence on the reduction mechanism. Oxygen reduction did not take place on the fullerene overlayer but proceeded on the sub-nanometer sized exposed pockets of the underlying Au substrate. Reduction at these confined sites produces hydrogen peroxide selectively. This effect is ascribed to the blocking action, or so-called "third body effect", of the adsorbed fullerene molecules, which do not display electrocatalytic properties for oxygen reduction.

Copper underpotential deposition (Cu UPD) and STM studies have been carried out on fullerene (C60) modified Au single crystal surfaces to determine the influence of crystal orientation on the structure of adsorbed C60 overlayers. High coverage could be achieved for C60 on all the surfaces studied, Au(111), Au(332) and Au(554). In each case, hexagonal and/or quasi-hexagonal arrays of adsorbed C60 were formed, with distortion from the ideal hexagonal packing arising from the constrained width of the terraces of the stepped surfaces. The structural parameters of the C60 overlayers were found to be sensitive to the terrace width.

Room temperature molecular electronics get one step closer to reality by exploiting chemical contacts between a single molecule and graphite., An open challenge for single-molecule electronics is to find stable contacts at room temperature with a well-defined conductance. Common coinage metal electrodes pose fabrication and operational problems due to the high mobility of the surface atoms. We demonstrate how molecules covalently grafted onto mechanically robust graphite/graphene substrates overcome these limitations. To this aim, we explore the effect of the anchoring group chemistry on the charge transport properties of graphite-molecule contacts by means of the scanning tunneling microscopy break-junction technique and ab initio simulations. Molecules adsorbed on graphite only via van der Waals interactions have a conductance that decreases exponentially upon stretching the junctions, whereas the molecules bonded covalently to graphite have a single well-defined conductance and yield contacts of unprecedented stability at room temperature. Our results demonstrate a strong bias dependence of the single-molecule conductance, which varies over more than one order of magnitude even at low bias voltages, and show an opposite rectification behavior for covalent and noncovalent contacts. We demonstrate that this bias-dependent conductance and opposite rectification behavior is due to a novel effect caused by the nonconstant, highly dispersive density of states of graphite around the Fermi energy and that the direction of rectification is governed by the detailed nature of the molecule/graphite contact. Combined with the prospect of new functionalities due to a strongly bias-dependent conductance, these covalent contacts are ideal candidates for next-generation molecular electronic devices.