Search

Knowledge of the neutron light-yield response is crucial to the understanding of scintillator-based neutron detectors. In this work, neutrons from 2–6 MeV have been used to study the scintillation light-yield response of the liquid scintillators NE 213A, EJ 305, EJ 331 and EJ 321P using event-by-event waveform digitization. Energy calibration was performed using a GEANT4 model to locate the edge positions of the Compton distributions produced by gamma-ray sources. The simulated light yield for neutrons from a PuBe source was compared to measured recoil proton distributions, where neutron energy was selected by time-of-flight. This resulted in an energy-dependent Birks parameterization to characterize the non-linear response to the lower energy neutrons. The NE 213A and EJ 305 results agree very well with existing data and are reproduced nicely by the simulation. New results for EJ 331 and EJ 321P, where the simulation also reproduces the data well, are presented.

Coincidence and time-of-flight measurement techniques are employed to tag fission neutrons emitted from a 252 Cf source sealed on one side with a very thin layer of Au. The source is positioned within a gaseous 4 He scintillator detector. Together with α particles, both light and heavy fission fragments pass through the thin layer of Au and are detected. The fragments enable the corresponding fission neutrons, which are detected in a NE-213 liquid-scintillator detector, to be tagged. The resulting continuous polychromatic beam of tagged neutrons has an energy dependence that agrees qualitatively with expectations. We anticipate that this technique will provide a cost-effective means for the characterization of neutron-detector efficiency in the energy range 1–6 MeV. [ABSTRACT FROM AUTHOR]

The response of a position-sensitive Li-glass scintillator detector to α -particles from a collimated 241Am source scanned across the face of the detector has been measured. Scintillation light was read out by an 8 × 8 pixel multi-anode photomultiplier and the signal amplitude for each pixel has been recorded for every position on a scan. The pixel signal is strongly dependent on position and in general several pixels will register a signal (a hit) above a given threshold. The effect of this threshold on hit multiplicity is studied, with a view to optimize the single-hit efficiency of the detector. [ABSTRACT FROM AUTHOR]

Alternate treatment routes for radioactive waste are a key research area for much of the nuclear industry, with potentially significant savings available through volume reduction of waste. Achieving this requires a full and demonstrable understanding of waste product behaviour. For this purpose, the UK's National Nuclear Laboratory (NNL) has been collaborating with the University of Glasgow and Lynkeos Technology to develop passive techniques for analysis of waste containers over a number of years. In this instance, novel muon tomographic techniques have been applied to the analysis of thermally treated nuclear waste surrogates as part of a project to build and deploy a first of a kind muon imaging system for nuclear waste. The system has been deployed at NNL's Central Laboratory, Cumbria, UK, to analyse products from a series of thermal treatment technology trials, funded by the Nuclear Decommissioning Authority (NDA) through the Direct Research Portfolio (DRP). Analysis of the waste products using this technique has proven the value of muon analysis in the development of waste management technologies, proving an ability to understand the homogeneity of products and direct further destructive testing. Results from three different thermal treatment trials are presented, with three different surrogate intermediate level waste (ILW) forms in each., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)