Search

Metal alloy matrix composites are generally lightweight structural materials with a high strength-to-weight ratio. They can be extensively used in various fields of modern engineering applications, such as aerospace and automotive components and biomedical engineering. This study focuses on the development and characterization of lightweight metal alloy matrix composites for industrial applications, with a particular emphasis on magnesium (Mg) alloys as a replacement for aluminum-based alloys. Mg alloys offer significant weight advantages, being 33% lighter than aluminum and 75% lighter than steel, making them highly desirable for use in various engineering fields. In the present study, Mg (AZ91) alloy reinforced with x-Si3N4 composites (x = 0, 1, 3, 5, 7, 9 wt.%) were fabricated using a liquid state process. The AZ91/x-Si3N4 composites were evaluated through physical, mechanical, wear, and microstructural characterization. The experimental results, supported by statistical analysis, demonstrated that the incorporation of Si3N4 particles amplified the mechanical properties, wear resistance, and porosity of the composites. However, the presence of the reinforced particles resulted in reduced forgeability and elongation, limiting certain deformation characteristics. The existence of the reinforced particles within the composites was confirmed through SEM analysis, providing visual evidence of their distribution and interaction within the Mg alloy matrix. Finally, it was concluded that the implication of the study could be sought for the light structural parts of aerospace, automotive, biomedical, and prosthetic applications. [ABSTRACT FROM AUTHOR]

A356 alloy based composites are extensively used in different component industries like components of automobile parts owing to pronounced strength to weight ratio. In the current paper, A356/Si3N4 nanocomposites are fabricated by means of stir casting by varying Si3N4 reinforcement nanoparticles. Silicon Nitride (Si3N4) nanoparticle is intermixed to Al powder mechanically to develop their wettability among the particles of A356/Si3N4 nanocomposites. The Si3N4 nanoparticle is integrated by altering weight percentage. The electomechanical stirring process to produce the vortex is taken up to spread Si3N4 nanoparticles in the liquefied matrix dispensed into a permanent mould. Morphological investigation of the composite specimen is accomplished by TEM. Based on the study, it can be acquired that the strengthening by Si3N4 nanoparticles promotes the strength and hardness of the fabricated nanocomposites. The maximum tensile strength is depicted to be 319 MPa for A356/5%Si3N4 nanocomposites whereas hardness is increased from 43 HBN to 86 HBN. The physical properties such as density and porosity are also increased due to the presence of Si3N4 nanoparticles. The maximum porosity of 1.12% was predicted at 5 wt. % of Si3N4. The TEM examination discloses the presence of Si3N4 nanoparticles in the fabricated composites. Additionally, the current research guidance has ability to afford a monitor to the industrialized preparation of A356/Si3N4 nanocomposites. [ABSTRACT FROM AUTHOR]

Non-healing leg ulcers are becoming a major public health problem. The high prevalence of leg ulcer directly affects patients' quality of life because it produces psychological (anxiety, depression), social and physical (amputation) handicap. Most leg ulcers become unsightly and they hardly if ever, yield to conventional treatment. Healing of an amputated part may pose a problem, hence amputation cannot be recommended without extensive pre-operative investigations. Prevalence is high among the poor, for whom expenses of surgery are not affordable. Few surgeons try skin graft but unfavourable local condition of the ulcer leads to rejection and all efforts prove futile. Keeping all these factors in mind, we have tested a Unani formulation for its ulcer healing properties; early results were surprising and in some cases unbelievable. [ABSTRACT FROM AUTHOR]