Search

Modular converters such as the multilevel cascaded H-bridge (CHB) are an attractive option for multiple applications mainly because of inherent modularity and fault-tolerant operation. This article is focused on the CHB converter operating with unbalanced conditions (different dc voltages and/or modulation indexes). Under these circumstances, applying the conventional control and modulation strategies, the output voltage harmonic spectrum is degraded. In this article, a generalized variable-angle phase-shifted pulsewidth modulation (PS-PWM) technique for CHB converters with a large number of power modules (> 3) is presented. The method considers all possible cells’ combinations to form groups and assigns the role of each cell in the group. This cell role defines the identifier of the cell in the variable-angle PS-PWM technique. In the steady state, in each group of cells, the harmonic distortion of the CHB output voltage located at twice the carrier frequency ƒc is eliminated, while the distortion at 4ƒc is also diminished. Experimental results show how the proposed technique achieves superior harmonic performance without introducing any significant disadvantage. [ABSTRACT FROM AUTHOR]

In this article, a nonlinear high-gain observer (NHGO)-based second-order sliding mode (SOSM) control strategy is proposed for the three-phase three-level neutral-point-clamped (NPC) converter. This controller applies the advanced SOSM algorithm both in the voltage regulation loop and in the power tracking loop, which provides a fast dynamic for the dc-link voltage, and also assures a good steady-state behavior for the NPC converter. Additionally, an NHGO technique is implemented in the voltage regulator combining with the SOSM algorithm. The conventional observer-based controllers suffer from the destructive effects of measurement noise, and it can only be addressed by diminishing the observer gain, which sacrifices the observer property. The NHGO technique adopts a time varying gain, that is, high gain in transient while low gain in steady state, which minimizes the adverse influence of measurement noise. The tuning method of the proposed NHGO-based SOSM controller is given to simplify the implementation process. Finally, the simulation and experimental results of the proposed control scheme for the NPC converter are given and compared with the conventional PI controller as well as the well-known linear extended state observer-based control method, which validates the feasibility and superiority of the proposed controller. [ABSTRACT FROM AUTHOR]

Grid-connected photovoltaic (PV) systems can provide grid support features by implementing flexible power point tracking (FPPT) strategies. Conventionally, the FPPT algorithms are based on linear search algorithms, such as perturb and observe. These solutions offer good practical results but usually lead to oscillations around the steady-state operating point. The main contribution of this article is to propose a binary search based FPPT (BNS-FPPT) algorithm. BNS is a computer-science-based searching algorithm that performs a logarithmic search within a sorted data array until the target voltage value is found. Compared to sequential searching algorithms, the proposed BNS-FPPT algorithm conducts a nonlinear search and avoids waving around the final value, reducing the steady-state error. In this article, the basics of the BNS-FPPT are described in detail. In addition, experimental results are conducted on a laboratory setup to compare the BNS-FPPT performance against a state-of-the-art solution. The results show that compared to linear search-based FPPT algorithms, the proposed BNS-FPPT is able to provide the required grid support functionalities, and avoid waving around the final operation point. [ABSTRACT FROM AUTHOR]

Due to the high-performance requirements of power converters in industrial applications, sliding-mode control has drawn extensive research attention for its insensitivity against external disturbances. In order to ensure this advantage while suppressing the chattering problem caused by discontinuous switching functions, in this article, a fuzzy sliding-mode control (FSMC) strategy consisting of three control loops is proposed for three-phase three-level neutral-point-clamped active front-end rectifiers. In the power tracking loop, an improved super-twisting algorithm is proposed to enforce the tracking errors of active power and reactive power to bounded regions in finite time and guarantee the transient performance. Next, in the dc-link voltage regulation loop, the regulation error of dc-link voltage converges to a bounded region with a super-twisting extended state observer-based FSMC strategy. A simple but efficient proportional-integral controller is employed in dc-link voltage balancing loop to reduce the voltage difference between two dc-link capacitors. The proposed controller is characterized by attenuated chattering phenomenon and improved the dc-link voltage regulation performance, disturbance rejection ability, and power tracking performance. Experimental results are provided to verify the effectiveness and superiority of the proposed strategy. [ABSTRACT FROM AUTHOR]