Search

Objective: The aim of the current study was to use the CIELab system to evaluate the performance of the whitening treatment involving violet light-emitting diode (LED) combined with a home 10% and ...

Objective: The aim of this study was to analyze the microhardness of demineralized enamel following different treatments (fluoride varnish, Er:YAG laser, and Er:YAG laser associated with fluoride v...

Objective: This in vivo study compared two bleaching techniques with regard to the degree of tooth sensitivity (TS), color change, and treatment stability for a 6-month follow-up period. Materials ...

Background: The diagnosis of sleep bruxism (SB) in children is difficult due to the lack of a polysomnographic protocol for this population. Moreover, the gold standard treatment [occlusal splint (...

Background: Gingival melanin hyperpigmentation is due to excessive deposition of melanin granules. The duration of pigmentation reappearance after treatment using different laser wavelengths remain...

Objective: To clinically evaluate the effect of the violet light-emitted diode (LED) light (405–410 nm) associated to in-office dental bleaching with 35% carbamide peroxide, on tooth color change a...

Aim: To evaluate the fracture resistance of roots restored with CAD/CAM-fabricated posts, receiving or not intracanal laser treatment, compared with glass fiber posts under mechanical cycling. Methods: Twenty-seven endodontically treated, single-rooted teeth were divided into 3 groups: group 1 (control), prefabricated glass fiber posts relined with resin composite; group 2, CAD/CAM-fabricated intraradicular posts using Resin Nano Ceramic (RNC) blocks; and group 3, CAD/CAM-fabricated intraradicular posts using RNC blocks in canals irradiated with a 940-nm diode laser (100 mJ, 300-um optic fiber, coronal-apical and apical-coronal helical movements, speed of 2 mm/second, 4 times each canal). After cementation of the coping, cyclic loading was applied at an angle of 135° to the long axis of the root, with a pulse load of 130 N, frequency of 2.2 Hz, and 150,000 pulses on the crown at a point located 2 mm below the incisal edge on the lingual aspect of the specimen. Every 50,000 cycles, the specimens were evaluated for root fracture occurring below or above the simulated bone crest. Results were analyzed by one-way ANOVA followed by Tukey’s test (p

Introduction: Microleakage has been reported to cause dentin hypersensitivity because of the passage of bacteria and their products through the restoration-tooth interface and is one of the main reasons for replacement of restorations. CO2 laser can be used for treatment of dentin hypersensitivity. Thus, this study aimed to evaluate in vitro the microleakage in composite restorations following surface pretreatment with acid etching and CO2 laser. Methods: Twelve human caries-free primary molars were selected. Class II cavities were prepared on occlusal mesial and occlusal distal surfaces. Specimens were randomly divided into four groups (n=6): Group 1 (G1) – 37% phosphoric acid gel etching + Beautiful-Bulk Restorative – Giomer (Shofu Inc); Group 2 (G2) – 37% phosphoric acid gel etching + SDR Bulk-Fill Flow (Dentsply); Group 3 (G3) – CO2 laser irradiation + Beautiful-Bulk Restorative – Giomer (Shofu Inc); Group 4 (G4) – CO2 laser irradiation + SDR Bulk-Fill Flow (Dentsply). Surfaces were restored with bonding agent (Natural Bond DE, DFL). Specimens were cut longitudinally and immersed in 0.5% methylene blue solution for 4 hours. Microleakage scores were assessed under a magnifying glass at x3,5 and qualitatively analyzed by scanning electron microscope (SEM). Data were analyzed using nonparametric Wilcoxon test (P < 0.05). Results: Scores prevailed between 0 and 2, however, no statistically significant difference was found among the groups (P= 0.05). Conclusion: It could be concluded that all composite resins bulk fill did not show significant difference among them regarding microleakage using either CO2 laser or 37% phosphoric acid etching.

Objective: Evaluate the bond strength of repairs made on composite resin following the treatment of the surface of the flaw with different bonding agents and/or CO2 laser. Background: The ...

Objective: To evaluate the effectiveness of the whitening and washing steps of a treatment using violet illumination (VI) alone or combined with hydrogen peroxide gel. In addition, we evaluated the...

This clinical study evaluated the effect of bleaching performed with violet LED light (405-410 nm), either combined with hydrogen peroxide (HP) gel, or not, on color change, dental sensitivity, participants' satisfaction and impact on their quality of life. A hundred participants were divided into one of the groups (n = 25): G1 - 35% HP (4 sessions, 1x/week); G2 - violet LED (4 sessions, 1x/week); G3 - violet LED (4 sessions, 2x/week); G4 - hybrid technique (violet LED + 35% HP; 4 sessions, 1x/week). Color evaluation was performed with colorimetric tests (objective and subjective), before, 14 days and 3 months after completion. Additionally, satisfaction with treatment, impact on quality of life (OHIP-14) and dental sensitivity were recorded. The data were submitted to statistical analysis, considering a significance level of 5%, with the exception of the data from the questionnaire on satisfaction (descriptive analysis). Two-way ANOVA and Tukey tests showed that there was no difference between color variation resulting from techniques used in G1 and G4; those used in G2 and G3 did not differ and were less effective for bleaching than those of the other groups, in both subjective and objective evaluations. Regarding tooth sensitivity, subjects in G2 and G3 experienced no sensitivity, ​​while those in G4 showed lower sensitivity values than those in G1. With respect to quality of life, only subjects in G1 and G2 showed a significant positive impact. Among the evaluated techniques, the hybrid type seemed to be a good alternative, showing effective bleaching with less tooth sensitivity.

Made available in DSpace on 2021-06-25T10:19:48Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-01-01 Background: Orofacial pain has been a prevalent symptom in the worldwide population, which may cause restrictions in daily activities and, consequently, have a great impact on the well-being of affected individuals. Photobiomodulation using light sources, such as low-level laser or light emitting diodes, with different wavelengths, has been widely used in the last years, in addition to being a noninvasive, low-cost resource and reducing pain. Objective: This study aimed at evaluating the effect of photobiomodulation as a protocol treatment to prevent facial muscle discomfort after long-term clinical procedures. Methods: The volunteers were randomized and allocated as follows: laser (n = 16) and placebo (n = 16) groups, following a crossover study design. The laser parameters were as following: 786 nm wavelength, 9 J per point, and 100 mW power of 2.393 W/cm2 irradiance. The discomfort was induced by simulating a 50-min dental procedure (with bilateral mouth open), and the pain scale (assessed bilaterally), tiredness, and temperature measurement through thermography were used for analysis. Results: The results showed a significant lower pain and tiredness in the laser group. Also, the results showed a statistically significant valid temperature change between the groups at times: T1, T40, and T50. Conclusions: According to our results, photobiomodulation showed a positive effect on the face musculature in patients submitted to the treatments, reducing pain and improving the subjective perception of exertion. Postgraduation Program of Biophotonics Applied to the Health Sciences Nove de Julho University (UNINOVE) Aracatuba Dental School São Paulo State University (UNESP) Physics Institute of São Carlos University of São Paulo-IFSC/USP Aracatuba Dental School São Paulo State University (UNESP)

To evaluate the efficacy of photobiomodulation for bone repair of critical surgical wounds with implants of bone morphogenetic proteins (BMPs) and bovine biological membranes, using histological and histomorphometric analysis.Tissue engineering has been developing rapidly through the use of various biomaterials for the treatment of bone defects, such as mechanical barriers consisting of biological membranes and implants of biomaterials for bone supply.Thirty-two male rats were divided into four groups (n = 8): group I-C: control; group II-PT: photobiomodulation therapy; group III-PM: Gen-ProHistological analysis confirmed the histomorphometric results, with the experimental groups showing bone neoformation of significantly higher quality and quantity at the end of 30 days compared with the control group.Photobiomodulation therapy was effective for bone repair mainly when associated with BMPs and a biological membrane. The results of this study are promising and stimulate further scientific and clinical research.

The purpose of this study was histological and thermometric examination of soft tissue de-epithelialization using digitally controlled laser handpiece (DCLH) - X-Runner.Commonly used techniques for de-epithelialization include scalpel, abrasion with diamond bur, or a combination of the two. Despite being simple, inexpensive and effective, these techniques are invasive and may produce unwanted side effects. It is important to look for alternative techniques using novel tools, which are minimally invasive and effective.114 porcine samples sized 6 × 6 mm were collected from the attached gingiva (AG) of the alveolar process of the mandible using 15C scalpel blade. The samples were irradiated by means of Er:YAG laser (LightWalker, Fotona, Slovenia), using X-Runner and HODCLH has induced significantly lower temperature increase compared with HOEr:YAG laser with DCLH handpiece may be an efficient tool in epithelium removal without excessive thermal damage.

Interdental papilla is of major importance to patients' orofacial aesthetics, especially regarding anterior teeth as part of the smile's harmony. Loss of gingival tissue, which constitutes interdental papilla, forms what in odontology is called black spaces. This loss, besides affecting the smile's aesthetics, also provokes phonetic and functional damage.The objective of the authors is to present the result of three clinical cases treated with an innovative technique called hemolasertherapy, which stimulates growth of gingival papilla and thus permanently fills in the black spaces.The photobiomodulation therapy (PBMT) used a 660 nm diode laser (Laser Duo, MMO-São Carlos, SP, Brazil), punctual, contact mode in two steps: before the bleeding (first PBMT) and immediately after bleeding (second PBMT). Parameters used were power output: 100 mW, CW; diameter tip: 5 mm; spot area: 0.19 cmThis initial study demonstrated that the blood clot originated from the bleeding provoked in the gingival area is rich in mesenchymal stem cells. PBMT enables preservation, viability, and further differentiation, stimulating the return of gingival stem cells, which would support their survival and differentiation in the blood clot, thus favoring interdental papilla regeneration.Follow-up was done for a time span of 4-5 years and considered excellent with regard to papilla preservation.

The photobiomodulation using the low-level laser therapy (LLLT) exerts a positive modulating effect on the synthesis of collagen in skeletal muscles and tendons. However, few studies have addressed this effect during the compensatory overload.Evaluate the effect of infrared laser on the deposition and organization of collagen fibers in muscle and tendon tissue during compensatory overload of the plantar muscle in rats.Wistar rats were submitted to bilateral ablation of the synergist muscles of the hind paws and divided in groups: Control, Hypertrophy, and Hypertrophy (H)+LLLT (780 nm, 40 mW, 9.6 J/cmAfter 7 days an increase was observed in the area between beam muscles in H+LLLT (25.45% ± 2.56) in comparison to H (20.3% ± 3.31), in mature fibers and fibrilis in H+LLLT (29346.88 μmInfrared laser irradiation induces an improvement in collagen organization in tendons and a reduction in the total area of collagen in muscles during compensatory atrophy following the ablation of synergist muscles.

The aim of this study was to evaluate the effect of phototherapy on bite force, facial swelling, mandibular movements, and pain in patients having undergone surgical treatment for mandibular fractures.These are among the predominant types of facial fractures, and treatment involving surgical fixation with titanium plates is one of the most common procedures in oral-maxillofacial surgery. Phototherapy has been used to accelerate the muscle healing process and significantly improves muscle regeneration by inducing the formation of new muscle fibers.The patients were divided into two groups: Group 1-active phototherapy, and Group 2-sham phototherapy. Both groups underwent the surgical procedure by the same surgeon using the same surgical technique. Dosimetric parameters are wavelength, 660 nm; power, 108 mW; radiant energy, 21.6 J; fluency, 21.6 J/cmThe primary variable was bite force measured with a gnathodynamometer and the secondary variables were facial swelling, mandibular movements (measured with digital calipers), and pain. The Student's t-test was used to determine intergroup differences.The findings suggest improvements in the laser group in comparison with the sham group with regard to mandibular dynamics, a reduction in postoperative facial swelling, a reduction in pain, and an increase in bite force.

Made available in DSpace on 2018-12-11T16:45:46Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-02-01 Objective: In this study, we aim to compare the photodynamic inactivation (PDI) effects of two different photosensitizers (PS), Photogem® and Natural Curcumin, irradiated with light-emitted diodes (LED) at 630 and 450 nm, respectively. Background: The current antimicrobial mouthwash for oral hygiene has several drawbacks. In this context, PDI is an alternative technique to inactivate pathogenic microbes in mucosa and in periodontal tissue. Furthermore, there are numerous infectious diseases that may affect the oral cavity, motivating the use of PDI in dentistry. Methods: The volunteers (n = 50) were randomize separated into five experimental groups (n = 5) for each PS: water control, PS control, light control, and two PS concentrations (25 and 100 mg/L). Each patient underwent mouthwash solution containing the PS before illumination procedure that was performed with an LED device. For microbial decontamination evaluation, the saliva was collected three times: before (T0), immediately after (T1), and 24 h after the illumination procedure (T2). After that, the difference between the colony forming units (CFU) for each volunteer was compared. Results: The results show that regardless of PS and treatment applied, there was microbial reduction immediately after PDI, however, after 24 h only Natural Curcumin still presents a reduction. For Photogem after 24 h, the microorganism returns to the original CFU. Conclusions: Immediately after PDI, both PS have the same efficiency, nevertheless the Natural Curcumin still has an efficacy after 24 h and also is a more viable photosensitizer. In addition, the results indicate that PDI can be a promised technique used for microbial reducing for the oral cavity. School of Dentistry of Araraquara UNESP University of Estadual Paulista São Carlos Institute of Physics University of São Paulo, PO Box 369 Biomedical Engineer Research Center CEB Camilo Castelo Branco University School of Dentistry of Araraquara UNESP University of Estadual Paulista

Introduction: Microleakage has been reported to cause dentin hypersensitivity because of the passage of bacteria and their products through the restoration-tooth interface and is one of the main reasons for replacement of restorations. CO(2) laser can be used for treatment of dentin hypersensitivity. Thus, this study aimed to evaluate in vitro the microleakage in composite restorations following surface pretreatment with acid etching and CO(2) laser. Methods: Twelve human caries-free primary molars were selected. Class II cavities were prepared on occlusal mesial and occlusal distal surfaces. Specimens were randomly divided into four groups (n=6): Group 1 (G1) – 37% phosphoric acid gel etching + Beautiful-Bulk Restorative – Giomer (Shofu Inc); Group 2 (G2) – 37% phosphoric acid gel etching + SDR Bulk-Fill Flow (Dentsply); Group 3 (G3) – CO(2) laser irradiation + Beautiful-Bulk Restorative – Giomer (Shofu Inc); Group 4 (G4) – CO(2) laser irradiation + SDR Bulk-Fill Flow (Dentsply). Surfaces were restored with bonding agent (Natural Bond DE, DFL). Specimens were cut longitudinally and immersed in 0.5% methylene blue solution for 4 hours. Microleakage scores were assessed under a magnifying glass at x3,5 and qualitatively analyzed by scanning electron microscope (SEM). Data were analyzed using nonparametric Wilcoxon test (P < 0.05). Results: Scores prevailed between 0 and 2, however, no statistically significant difference was found among the groups (P = 0.05). Conclusion: It could be concluded that all composite resins bulk fill did not show significant difference among them regarding microleakage using either CO(2) laser or 37% phosphoric acid etching.

To evaluate the effects of bracket removal using an erbium laser on the pulp temperature and enamel surface.Removal of orthodontic brackets with conventional debonding pliers may result in enamel cracks. To avoid damage to the enamel surface and effectively remove metal or ceramic brackets, different types of lasers, such as Nd:YAG, COA total of 55 brackets (n = 55; 20 metal and 35 ceramic ones) were bonded to 55 caries-free premolars extracted for orthodontic indications. Brackets were irradiated with Er:YAG laser (Morita, Irvine, CA) with a wavelength of 2940 nm at a power of 3.4 W, energy 170 mJ, frequency 20 Hz, pulse duration 300 μs, tip diameter 0.8 mm, air/fluid cooling 3 mL/s, and time of irradiation: 6 sec. Debonding was made by scanning (n = 15; 6 sec irradiation at distance of 2 mm from the bracket with an "S" shape movement) and circular (n = 15; 6 sec irradiation at distance of 1 mm from the bracket) motion technique in ceramic brackets or the circular motion technique in metal brackets (n = 15). The number of 10 nonirradiated teeth with ceramic (n = 5) or metal brackets (n = 5) was used as a control in SEM test and EDS analysis. The damage in tooth enamel surface and the calcium percentage were analyzed by means of scanning electron microscope (JEOL 6610LV, JEOL, Japan) and energy dispersive X-ray spectroscopy (EDS, Oxford, United Kingdom). Temperature changes in the pulp were measured by K-type thermocouple. Evaluation of the Adhesive Remnant Index (ARI) on the enamel surface of each tooth was examined after bracket debonding.The scanning method has caused significantly lower temperature increase (mean: 0.83°C) compared with circular motion technique around the ceramic brackets (mean: 1.78°C; p = 0.0001) or the metal brackets (mean: 1.29°C; p = 0.015). ARI score showed no differences between the study groups (p = 0.57). SEM analysis revealed no cracks on enamel surface after laser-assisted debonding in comparison with the control samples where cracks were found. EDS showed a higher mean percentage of the calcium (30.7-85.8%) for all test groups compared with control samples (mean: 7%; p = 0.0002). The amount of the calcium elements was higher for metal brackets in comparison with ceramic ones (p = 0.0002).Er:YAG laser-assisted debonding causes a minor increase in the pulp temperature and reduced the risk of enamel damage compared with conventional bracket removal.

Background and aims: One of the major side effects of vital bleaching is the reduction of enamel micro-hardness. The purpose of this study was to evaluate the influence of two different bleaching systems, Plasma Arc and GaAlAs laser, on the enamel micro-hardness. Materials and methods: 15 freshly extracted human third molars were sectioned to prepare 30 enamel blocks (5×5 mm). These samples were then randomly divided into 2 groups of 15 each (n=15): a plasma arc bleaching group (: 350–700 nm) + 35% Hydrogen Peroxide whitening gel and a laser bleaching group (GaAlAs laser, λ: 810 nm, P: 10 W, CW, Special Tip) + 35% Hydrogen Peroxide whitening gel. Samples were subjected to the Vickers micro-hardness test (VHN) at a load of 50 g for 15s before and after treatment. Data were statistically analyzed by a Mann-Whitney test (p≤0.05). Results: In the GaAlAs laser group, the enamel micro-hardness was 618.2 before and was reduced to 544.6 after bleaching procedures. In the plasma arc group, the enamel micro-hardness was 644.8 before and 498.9 after bleaching. Although both techniques significantly reduced VHN, plasma arc bleaching resulted in a 22.62% reduction in VHN for enamel micro-hardness, whereas an 11.89% reduction in VHN was observed for laser bleaching; this difference is statistically significant (p

The aim of this work was to verify the existence of correlation between Raman spectroscopy readings of phosphate apatite (∼960 cm−1), fluoridated apatite (∼575 cm−1) and organic matrix (∼1450 cm−1) levels and Diagnodent® readings at different stages of dental caries in extracted human teeth. The mean peak value of fluorescence in the carious area was recorded and teeth were divided in enamel caries, dentin caries and sound dental structure. After fluorescence readings, Raman spectroscopy was carried out on the same sites. The results showed significant difference (ANOVA, p

Oral biology, oral pathology, and oral treatments are interesting fields in dentistry. The rapid evolution of technologies and the continuous apparition of new materials and products available for practitioners oblige searchers to evaluate their impact on oral tissues and teeth. The evaluation of the biocompatibility of new products is essential to avoid any tissues damage caused by an eventual toxicity or side effects of therapeutic products or materials.

Background: The topographical features of intraradicular dentine pretreated with sodium hypochlorite (NaOCl) or ethylenediamine tetraacetic acid (EDTA) followed by diode laser irradiation have not yet been determined. Purpose: To evaluate the alterations of dentine irradiated with 980-nm diode laser at different parameters after the surface treatment with NaOCl and EDTA. Study design: Roots of 60 canines were biomechanically prepared and irrigated with NaOCl or EDTA. Groups were divided according to the laser parameters: 1.5 W/CW; 1.5 W/100 Hz; 3.0 W/CW; 3.0 W/100 Hz and no irradiation (control). The roots were splited longitudinally and analyzed by scanning electron microscopy (SEM) in a quali-quatitative way. The scores were submitted to two-way Kruskal–Wallis and Dunn's tests. Results: The statistical analysis demonstrated that the specimens treated only with NaOCl or EDTA (control groups) were statistically different (P < 0.05) from the laser-irradiated specimens, regardless of the parameter setting. The specimens treated with NaOCl showed a laser-modified surface with smear layer, fissures, and no visible tubules. Those treated with EDTA and irradiated by laser presented absence of smear layer, tubules partially exposed and melting areas. Conclusions: The tested parameters of 980-nm diode laser promoted similar alterations on dentine morphology, dependent to the type of surface pretreatment. Microsc. Res. Tech., 2009. © 2008 Wiley-Liss, Inc.

To assess the temperature variation in the cervical, middle and apical thirds of root external wall, caused by 980-nm diode laser irradiation with different parameters.The roots of 90 canines, had their canals instrumented and were randomly distributed into 3 groups (n=30) according to the laser potency (1.5 W, 3.0 W and 5.0 W). Each group was subdivided into 3 (n=10) according to the frequency (CM, 100 Hz and 1000 Hz), and each subgroup divided into 2 (n=5): dried canal or filled with distilled water. The maximum temperature values were collected by 3 thermocouples located at each third of the root external wall and recorded by digital thermometers.The groups irradiated in the continuous mode (CM) presented the highest values (11.82+/-5.78), regardless of the canals were dry or not, which were statistically different (p0.01) from those obtained with 100 Hz (6.22+/-3.64) and 1000 Hz (6.00+/-3.36), which presented no statistical difference between them (p0.01). The groups irradiated with 5.0 W presented the greatest temperature variation (12.15+/-5.14), followed by 3.0 W (7.88+/-3.92) and 1.5 W (4.02+/-2.16), differing between them (p0.01). The cervical third of the root presented the highest temperature rises (9.68+/-5.80), followed by the middle (7.66+/-4.87) and apical (6.70+/-4.23), with statistical difference among them (p0.01). After 30s from the end of irradiation, all the specimens presented temperature variation lower than 10 degrees C.Application of 980-nm diode laser in the root, at 1.5 W in all operating modes, and 3.0 W, in the pulsed mode, for 20s, can safely be used in endodontic treatment, irrespective of the presence of humidity.

The main purpose of this study was to evaluate the utility of Raman spectroscopy analysis as a research tool to study the effects of Er:YAG laser etching on dentin mineral and organic components. A secondary aim was to study the effects of the decontamination process and the storage procedure on dentin components.There are no spectroscopy reports relating the effects of Er:YAG laser irradiation as an alternative to acid etching and the manipulation process on the dentin structure.Twelve non-carious human third molars were divided in two main groups: stored in thymol solution (group A, n = 6) or autoclaved (group B, n = 6). The specimens were either etched with 37% phosphoric acid (control subgroup) or irradiated with Er:YAG laser. Irradiated samples were divided into the following subgroups: I, II, and III (80 mJ, 3 Hz, 30 sec; 120 mJ, 3 Hz, 30 sec; and 180 mJ, 3 Hz, 30 sec, respectively). Samples were analyzed by Raman spectroscopy.The mineral and organic dentin contents were more affected in autoclaved teeth than in the specimens stored in thymol. Peak area reduction in group A specimens treated with phosphoric acid and pulse energy of 80 mJ were the most conservative surface treatments regarding changes in the peak area of organic and inorganic dentin components.The autoclaving process and pulse energies of 120 and 180 mJ produced greater reduction of organic and inorganic contents in dentin, associated with greater reduction in the areas of 968, 1077, 1460, and 1670 cm(1) Raman peaks.

This study evaluated, in vitro, the degree of disinfection of the Er:YAG laser in root canals contaminated with Bacillus subtilis, Staphylococcus aureus, Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans, for 28 days.Forty-six single-rooted human teeth were divided into five groups of eight teeth each; three teeth were used as negative controls and three as positive controls. After contamination, the root canals were prepared mechanically. Three groups were irradiated with Er:YAG laser at 100 mJ, varying the frequency (7, 10, and 16 Hz). Two groups were irrigated with 1.0% and 2.5% NaOCl solution. After treatment, two sterilized paper cones were placed in the root canals for 5 min. One cone was transferred to 2.0 mL of Letheen broth culture medium, incubated at 37 degrees C for 48 h, and then 0.1 mL of that solution was placed in 2.0 mL of brain heart infusion for 48 h to determine microbial growth. The other cone was transferred to a test pipette with peptone and water for serial dilution and spread in Müeller Hinton medium. After 24 h of incubation, the colony-forming units (CFUs) were counted.There was a microbial reduction of 85.33% for the group irradiated with Er:YAG laser at 100 mJ/7 Hz, 74.58% at 100 mJ/10 Hz, and 89.50% at 100 mJ/16 Hz. For the groups irrigated with 1.0% and 2.5% NaOCl solution, 83.15% and 84.46% values of microbial reduction were obtained respectively.All the groups showed statistically similar results (p0.05%). No method totally eliminated microorganisms.

Objectives: The purpose of this study was to evaluate the antimicrobial effect of toluidine blue 0 (TBO), in combination with either a helium/neon (HeNe) laser or a light-emitting diode (LED), on the viability and architecture of Streptococcus mutans biofilms.Methods: Biofilms were grown on hydroxyapatite discs in a constant depth film ferment or fed with artificial saliva that was supplemented with 2% sucrose four times a day, thus producing a typical 'Stephan pH curve'. Photodynamic therapy was subsequently carried out on biofilms of various ages with light from either the HeNe laser or LED using energy densities of between 49 and 294 J/cm(2).Results: Significant decreases in the viability of S. mutansbiofilms were only observed when biofilms were exposed to both TBO and light, when reductions in viability of up to 99.99% were observed with both light sources. Overall, the results showed that the bactericidal effect was light dose-dependent and that older biofilms were less susceptible to photodynamic therapy. Confocal laser scanning microscopy images suggested that lethal photosensitization occurred predominantly in the outermost layers of the biofilms.Conclusions: Photodynamic therapy may be a useful approach in the treatment of dental plaque-related diseases.

Background and Objectives Smear layer removal with EDTA from root canal walls allows greater cleaning and disinfection of root canals. However, because Er:YAG laser acts on the removal of the smear layer, the objective of investigation was to analyze in vitro the effect of Er:YAG laser on dentin root canal wall permeability after endodontic instrumentation and irrigation with water or sodium hypochlorite and Er:YAG laser application. Study Design/Materials and Methods A total of 25 extracted human maxillary incisors were divided into five groups: Group I, instrumentation with deionized distilled water as the irrigating solution; Group II, instrumentation with 1% sodium hypochlorite as the irrigating solution; Group III, instrumentation with deionized distilled water as the irrigating solution and Er:YAG laser application; Group IV, instrumentation with 1% sodium hypochlorite solution as the irrigating solution and Er:YAG laser application; Group V, instrumentation only up to #20 file with deionized distilled water as the irrigating solution and Er:YAG laser irradiation. The laser parameters were 15 Hz, 140 mJ, total energy 42 J, 300 pulses (Kavo Key Laser). Copper sulfate (10%) was used to evaluate dentin permeability. The penetration of copper ions into the dentinal tubules was observed using 1% rubeanic acid, which reveals copper ions, forming a stained compound ranging in color from deep blue to black. Transverse sections (500-μm thick) were obtained with a diamond disk from the cervical, middle, and apical thirds. Results The instrumentation of the root canal that used water as the irrigating solution followed by Er:YAG laser irradiation promoted the greatest increase in dentin permeability. The use of Er:YAG laser, 1% sodium hypochlorite + Er:YAG, and 1% sodium hypochlorite used alone showed an intermediate capacity of increasing dentin permeability. The use of water as the irrigating solution without Er:YAG laser promoted the least dentin permeability. Conclusions The use of water as the irrigating solution after instrumentation and Er:YAG laser irradiation was an effective procedure for increasing dentin permeability. Lasers Surg. Med. 26:277–281, 2000. © 2000 Wiley-Liss, Inc.

Dentinal hypersensitivity has been studied for several years. It is reported as a strikingly painful condition that originates from the exposure of dentinal tubuli when the thickness of the enamel or cement is significantly reduced. Usually the exposed area is subjected to several kinds of stimuli, resulting in sharp acute pain. The aim of this study was to evaluate the efficacy of low level laser therapy (LLLT) in the treatment of patients with dentinal hypersensitivity. A total of 1102 teeth of 388 patients were treated with LLLT between 1995-2000. Ninety-eight males and 290 females aged 30 to 45 years old were treated. For LLLT, a 780nm continuous wave diode laser was used at an output of 40mW, elliptical area of the beam, 2mm2, and exposure time per point of 25s. This corresponds to an equivalent dose of 50 J/cm2 at each point (considering the area of the spot). If a 1 cm2 area is considered, the total dose per tooth was 4J/cm2. With the 830nm CW 50mW diode laser, the elliptical area of the beam was 2mm2, and exposure time per point was 20s. This corresponds to an equivalent dose of 50J/cm2 at each point (considering the area of the spot). If a 1cm2 area is considered, the total dose per tooth was 4J/cm2. The results showed 403 (36.57%) out of 1102 teeth required a single session for complete remission of the symptom, 255 (23.14%) needed two sessions; 182 (16.51 %) three sessions; 107 (9.7%) four sessions; and 59 (5.35%) five sessions. Ninety-six (8.71%) did not respond to LLLT and the patients were re-assessed and treatment changed. The more affected tooth was the lower premolar (301 - 27.4%), followed by lower molars (163 - 14.8%), upper premolar (149 - 13.5%), lower incisive (148 - 13.4%), upper canine (119 - 10.7%), upper incisive (108 - 9.9%), lower canine (62 - 5.6%), and upper molars (52 - 4.7%). The result of the present investigation demonstrates that LLLT, when used with the correct irradiation parameters, is effective in treating dentinal hypersensitivity, as it quickly reduces pain and maintains a prolonged pain-free status in 91.27% of the cases. Previous studies carried out by the authors examined the histological reaction of the dentinal pulp in rats after application of LLLT. The LLLT was shown to be effective in stimulating odontoblasts, producing repaired dentine and closing dentine tubuli.

This study evaluated in vitro the external temperature increase at the three root thirds using five different fiber optic tip withdrawal techniques in 50 human canines. Er:YAG laser was applied with a 50/28 fiber optic tip with 250 mJ input, 112 mJ output, 10 Hz, 1 mm from the apical foramen: group 1: each third was irradiated starting at the apex for 1 s on each wall, with the irradiation turned off between thirds; group 2: apical third irradiated without movement for 2 s and tip withdrawn with continuous radiation up to the cervical third; group 3: tip activated at the apex and removed to the canal entrance in a straight line; group 4: tip activated at the apex and removed to the canal entrance with circular movements touching all walls; group 5: tip activated at the apex and removed to the canal entrance with clockwise circular movements for 6 s and then reinserting and removing with counterclockwise circular movements for another 6 s, touching all walls. Group 1 had significantly lower external temperature (p

The simultaneous need for infection-control protocols in sample preparations and for safe laser irradiation parameters prompted this study about the effects of heat produced by both sample sterilization and laser etching on dentin components. The dentin was exposed on 30 bovine incisors, and then divided into two main groups: autoclaved (group A) or thymol treatment (group B). The surface of the dentin was schematically divided into four areas, with each one corresponding to a treatment subgroup. The specimens were either etched with phosphoric acid (control-CG) or irradiated with Er:YAG laser (subgroups: I- 80 mJ, II-120 mJ, and III-180 mJ). Elemental distribution maps were done by energy-dispersive X-ray fluorescence (μ-EDXRF) on each treatment area. The dentin surface in depth was exposed and line-scan maps were performed. The B_CG treatment produced the best distribution of calcium (Ca) and phosphorus (P) content throughout the dentin surface. Er:YAG laser etching produced irregular patterns of elemental distribution in the dentin. Laser energies of 120 and 180 mJ produced the highest maximum calcium values. The Er:YAG laser energy of 180 mJ produced a localized increase in Ca and P content on the superficial layer of the dentin (∼0-0.10 mm). The auto- claving treatment of samples in experiments is not recommended since it produced damaging effects on dentin components. Er:YAG laser irradiation produced a hetero- geneous Ca and P distribution throughout the dentin surface with areas of increased Ca concentration, and this may affect clinically the permeability, solubility, or adhesive characteristics of dental hard tissues with restorative procedures.

In vitro studies have provided conflicting evidence of temperature changes in the tooth pulp chamber after low-level laser irradiation of the tooth surface. The present study was an in vitro evaluation of temperature increases in the human tooth pulp chamber after diode laser irradiation (GaAlAs, λ = 808 nm) using different power densities. Twelve human teeth (three incisors, three canines, three premolars and three molars) were sectioned in the cervical third of the root and enlarged for the introduction of a thermocouple into the pulp chamber. The teeth were irradiated with 417 mW, 207 mW and 78 mW power outputs for 30 s on the vestibular surface approximately 2 mm from the cervical line of the crown. The highest average increase in temperature (5.6°C) was observed in incisors irradiated with 417 mW. None of the teeth (incisors, canines, premolars or molars) irradiated with 207 mW showed temperature increases higher than 5.5°C that could potentially be harmful to pulp tissue. Teeth irradiated with 78 mW showed lower temperature increases. The study showed that diode laser irradiation with a wavelength of 808 nm at 417 mW power output increased the pulp chamber temperature of certain groups of teeth, especially incisors and premolars, to critical threshold values for the dental pulp (5.5°C). Thus, this study serves as a warning to clinicians that “more” is not necessarily “better”.

Failures in the sealing of the tooth apex have been considered to be responsible for most of the failures of apical surgeries. The Er:YAG laser has been proposed as an alternative for the use of rotator instruments in surgical endodontics due to its precision, lack of vibration, less post-operative discomfort, bacterial reduction, and less stress for patients and professionals. Following approval by the ethics committee, 12 extracted human canines without previous endodontic treatment with anatomically normal roots and free from apical lesions were washed in running tap water and disinfected. The teeth were sectioned axially at the crown-root junction and submitted to routine endodontic treatment. The apical limit was set at 1 mm before the apical foramen. The root canals were routinely filled with Gutta-Percha points and Sealer 26 and were randomly distributed into two groups (n = 6). In group I, apicectomy was performed with the Er:YAG laser (KAVO KEY Laser II®, Germany, λ = 2.940 nm, pulsed mode, 2051 tip, with air spray cooling, 250 mJ/15 Hz). Apical cut was performed of perpendicular mode 3 mm from the apical foramen. In group II, the same procedures and the same sequence as above was used, varying only the parameters of the Er:YAG laser (400 mJ/6 Hz). Sealing of the cervical end the apex was carried out with acrylic resin; the roots were covered by a layer of epoxy glue and two layers of nail polish. The specimens were divided into groups and fixed, by the cervical third, on wax. Impermeabilization of the residual root apical third was performed following the same procedures used in the cervical third but the residual apex was left free from the impermeabilization. After that, the roots were immersed in a 2% methylene blue solution and placed in a bacteriological oven for 48 h and then washed in running tap water for 2 h. The samples were sagittally split into two parts. The segments were visually observed and the one showing the greatest level of dye leakage was selected and kept in an individual container and coded accordingly. Apical staining was measured using a stereoscopic magnifying glass, a compass, and a caliper. The measurement was performed by three endodontists, previously calibrated, and unaware of the sample coding. The results showed that group I showed the greatest level of dye leakage. There was a significantly difference between the groups (p = 0.001). It is concluded that the apicectomies carried out with 400 mJ/6 Hz showed the smallest infiltration value.

Aim To evaluate the bond strength of AH Plus and Epiphany sealers to human root canal dentine irradiated with a 980 nm diode laser at different power and frequency parameters, using the push-out test. Methodology Sixty canine roots were sectioned below the cementoenamel junction to provide 4-mm-thick dentine discs that had their root canals prepared with a tapered bur and irrigated with sodium hypochlorite, ethylenediaminetetraacetic acid and distilled water. The specimens were assigned to five groups (n = 12): one control (no laser) and four experimental groups that were submitted to 980 nm diode laser irradiation at different power (1.5 and 3.0 W) and frequency (continuous wave and 100 Hz) parameters. Half of specimens in each group had their canals filled with AH Plus sealer and half with Epiphany. The push-out test was performed and data (MPa) were analysed statistically by anova and Tukey’s test (P

The purpose of this in vitro study was to investigate using the scanning electron microscope (SEM) the ultrastructural morphological changes of the radicular dentine surface after irradiation with 980-nm diode laser energy at different parameters and angles of incidence.There have been limited reports on the effects of diode laser irradiation at 980 nm on radicular dentin morphology.Seventy-two maxillary canines were sectioned and roots were biomechanically prepared using K3 rotary instruments. The teeth were irrigated with 2 mL of distilled water between files and final irrigation was performed with 10 mL of distilled water. The teeth were then randomly divided into five groups (n = 8 each) according to their diode laser parameters: Group 1: no irradiation (control); group 2: 1.5 W/continuous wave (CW) emission (the manufacturer's parameters); group 3: 1.5 W/100 Hz; group 4: 3 W/CW; and group 5: 3 W/100 Hz. Laser energy was applied with helicoid movements (parallel to the canal walls) for 20 sec. Eight additional teeth for each group were endodontically prepared and split longitudinally and irradiation was applied perpendicularly to the root surface.Statistical analysis showed no difference between the root canal thirds irradiated with the 980-nm diode laser, and similar results between the parameters 1.5 W/CW and 3 W/100 Hz (p0.05).When considering different output powers and delivery modes our results showed that changes varied from smear layer removal to dentine fusion.

This study evaluated the effect of 980-nm diode laser at different parameters on root canal dentin permeability associated with different irrigants. Seventy-five canines were sectioned at 15 mm from the apex, prepared mechanically up to #40 .02 instrument, and irrigated with 2 mL distilled water. Final irrigation (10 mL) was used as follows: (1) distilled water; (2) 1% NaOCl; (3) 17% ethylenediaminetetraacetic acid + a cationic surfactant cetyltrimethylammonium bromide (EDTAC). Laser was applied at 1.5 or 3.0 W as either continuous wave or pulsed wave (100 Hz). The teeth were then processed histochemically, the percentage of copper ion penetration into the dentin of the canal walls was counted, and the data were analyzed statistically with the Tukey-Kramer test (alpha < .01). When laser was associated with water, an increase in permeability was found, whereas permeability decreased when associated with EDTAC. Dentin permeability after laser irradiation was directly dependent on the solution used for final irrigation.

This in vitro pilot study investigated the CO2 laser effects on demineralization inhibition in sound human dental enamel. Thirty six human enamel specimens were used and randomly assigned to 6 groups, as follows: I) Control; II) 1W; III) 2W; IV) 3W; V) 4W; VI) 5W. Group I one was kept as control and others were irradiated using a pulsed CO2 laser (λ=10.6 μm) with low crescent potencies. Fourier Transform Raman Spectroscopy was used to study the surface composition of specimens after irradiation. One specimen from each group was analyzed by Scanning Electron Microscopy and the remaining ones were submitted to an 8-day pH cycling model with use of fluoridated toothpaste twice a day. After pH-cycling, the cross-sectional microhardness was performed for mineral loss (ΔZ) quantification. The data were analyzed by ANOVA and Tuckey test (α=0.05). No changes were found either in SEM photomicrographies or RAMAN Spectra of the specimens in all groups. The ΔZ values (n=5; mean±SD) for I-VI groups were: 1741.6±725.3a; 1782.7±639.0a; 1427.2±237.0a; 1780.6±552.4a; 1385.2±602.2a; 943.1±228.1a respectively. The highest percentage of caries inhibition was found in group VI (45.8%); however the differences between ΔZ of the groups were not statistically significant. The use of CO2 laser with low fluencies did not prevent more caries development than the use of fluoridated toothpaste, even though group VI had present good results in caries inhibition. Energy densities higher than 0.0125 J/cm2 should be used to promote chemical or morphological changes on enamel surface, which are able of inhibiting mineral.