Search

This work focused on the upgrading of non-durable tropical wood species originating from fast-growing plantations of Costa Rica. Modification of such tropical woods with furfuryl alcohol, although ...

This work aimed to evaluate the effect of the precipitation of CaCO3 via subsequential in-situ mineral formation based on a solution-exchange process of two solution-exchange cycles via impregnation with CaCl2 in ethanol and NaHCO3 in water. The effects were investigated in terms of the structure of the wood and the thermal, physical, mechanical, and decay resistance properties of nine species commonly used in commercial reforestation in Costa Rica. The thermogravimetric analysis results showed that the woods with the highest formation of CaCO3 showed a more pronounced signal at 200 °C in relation to untreated/wood; therefore, they were more thermostable. The fire-retardancy test showed that flame time in CaCO3/wood composites was longer than for untreated/wood in half of the species tested, presenting a positive effect of mineralization. Wood density, decay resistance, modulus of rupture (MOR), modulus of elasticity (MOE) in flexion, and MOR in compression were slightly affected by mineralization. Water absorption increased, but it had no negative effect on the dimensional stability. In general, mineralization can be a chemical treatment to increase the dimensional stability and fire resistance of hardwood species without modifying the wood’s physical and mechanical properties.

Magnetic wood is a composite material that achieves harmony between both woody and magnetic functions through the active addition of magnetic characteristics to the wood itself. In addition to showing magnetic characteristics, magnetic wood offers low specific gravity, humidity control and acoustic absorption ability. It has potential for broad applications in the fields of electromagnetic wave absorption, electromagnetic interference shielding, furniture, etc. This work reports on the synthesis of Fe

Tectona grandis (teak) is an important commercial tree species that is widely used in tropical dendrochronology due to the formation of climate-sensitive annual growth rings. However, young trees growing in plantation conditions exhibit poor ring visibility during the first years of growth, limiting the dendrochronology application. In the present study, we use x-ray densitometry to determine the wood density profile between and within annual rings and at the sapwood-heartwood boundary in trees from fast-growth plantations. The resulting wood density profiles (WDP) can be categorized as uniform, stable growth, unstable growth, and false. The annual ring boundaries were indistinct in trees less than 8 years old. In mature trees, the annual ring boundaries are more defined. In relation to the sapwood-heartwood boundary, the WDP showed a decrease in the wood density; however, this decrease is influenced by the annual ring boundary when the two boundaries coincide. The identification of annual rings in trees growing in fast-growth plantations should be combined with X-ray densitometry and visual identification if wood density data are necessary for deriving other analysis, as climate change, from annual ring.

Se analizó de forma perceptual la transferencia de conocimiento en tecnología de la madera en instituciones educativas estatales de Costa Rica. Se realizaron capacitaciones activo-pasivas en temas de secado, preservado y calidad de la madera, llevando a cabo tres evaluaciones de aprendizaje (precurso, postcurso y 30 semanas luego del postcurso). Con estas se valuó la percepción, conocimiento adquirido y limitaciones de los sistemas empleados. Se obtuvo una gran similitud entre las temáticas de secado y preservado con conocimientos previos superiores al 65 %, aprendizajes del 85 % y retenciones de conocimiento del 75 %; caso contrario se evidenció con la temática de calidad, la cual presentó un conocimiento previo del 20 %, aprendizaje del 83.5 % y retención del 75.6 %; los temas de secado y preservado mostraron la mejor percepción, considerados como simples, aplicables, útiles y entendibles; mientras que el tema de calidad se consideró complicado, complejo, inaplicable pero útil. Finalmente, se encontró que el aprendizaje de secado y preservado debe ser una combinación de 50 %-50 % entre teoría-práctica; mientras la calidad debería ser 25 %-75 % teoría-práctica.

To elucidate the development of heartwood, bark, sapwood, pith and specific gravity of wood in fast-growing teak (Tectona grandis) plantations in Costa Rica, we sampled three trees in each of 55 plantations and modelled each variable with age, site and different tree heights. Age and stand density of plantations were significant correlated with stem diameter at breast height and total height of the tree. Formation of heartwood was initiated at the age of 4-year-old and increased in direct proportion with age. The age of plantation had a significant relationship with stem diameter at breast height, heartwood percentage, sapwood thickness, sapwood percentage, percentage of bark, pith diameter and percentage, and specify gravity. The model for these tree parameters was model with these parameters as dependent variable and in relation to age as independent variable.

Tectona grandis is the second most important species for reforestation in Costa Rica, and any improvement in its industrialization process is important, especially the drying process. Lumber obtained from a plantation of 12-year-old T. grandis trees was used to evaluate three drying schedules that include integrated steaming processes to determine the combined effect of the steam-drying system on the dried lumber. The variations in the moisture content (MC) and drying rate (DR) with drying time (DT) both before and after the steaming process were modeled mathematically for boards that have a flat and quarter grain pattern. For both types of boards that were dried with and without steaming, a relationship between MC and DT was observed. There was inflexion at 40%, and two mathematical models were computed. Additionally, the relationship between DR and DT for boards with flat and quarter grain patterns was not affected by the steaming process, and an inflection point was observed at 30 h (40% MC for...

Aim of study: Plantations are threatened by an emerging disease called “Gmelina death disease”. The objective of this study was measured the incidence and severity of this disease and were correlated with the characteristics of the plantations, micro- and macronutrients in the soil and climatic parameters.Area of study: The present study evaluated 16 symptomatic fast-growth plantations of different age in Costa RicaMaterial and methods: Fungi were identified from xylem of infected trees. Incidence and severity was measured and correlated with the characteristics of the plantations, micro- and macronutrients in the soil and climatic parameters. Root condition and the quality (specify gravity, mechanical and decay resistance and chemical compositions), of the wood of symptomatic and asymptomatic trees were compared.Main results: Three fungal species (Chaetomella raphigera, Fusarium solani and Rhizomucor variabilis) were identified from diseased samples. Clay content in the soil profile from 10-20 cm deep explained a significant proportion of the variation in the incidence and severity of the disease, and stand density was related to severity. Although two climatic variables, Holdridge’s potential annual evapotranspiration and Thornthwaite’s potential evapotranspiration, showed a relationship between the incidence in the trees and symptoms of the disease. Infected wood turned black in symptomatic trees. Specify gravity and mechanical resistance of infected wood decreased, whereas its natural durability was unaffected. Changes were observed in the quantities of Mg, Fe, Ca, K and Zn in infected wood.Research highlights: Gmelina plantations established in sites with high stand densities and high contents of clay increase susceptibility to this disease.

The influence of climatic and site fertility conditions affect wood quality from fast growing trees. The change in tree diameter, thickness of sapwood, heartwood percentage and bark and pith tissue, physical and mechanical properties, resistance to termite attack and the presence of drying defects on lumber boards were evaluated. Four teak trees (Tectona grandis L.f.) from fast growing plantations in Costa Rica were selected for the study. Teak trees of 11 years old growing in two climatic conditions and two fertility types (high and low fertility) in Costa Rica were studied. The results showed that tree diameter, sapwood thickness, pith diameter and its percentage were higher in the climate with more rainfall and greater fertility. However, the percentage of heartwood and bark were higher at low fertility sites with less rainfall. It was also observed that only sites with low fertility produce modifications in specify gravity, fiber saturation point, initial moisture content, MOR in flexion in green and dry condition, MOE in bending and resistance to termite attack. Incidence and magnitude of defects increased with drying, and were mainly affected when wood comes from younger trees from high fertility sites and growing in tropical moist forest climate. © 2015, Indian Academy of Wood Science.

This study details information about physical, chemical and mechanical properties, drying, preservation and workability of wood from Cordia alliodora, Dipteryx panamensis, Enterolobium cyclocarpum, Hieronyma alchorneoides, Samanea saman and Vochysia ferruginea trees, growing in forest plantations in Costa Rica. Variation of the general properties in relation to height showed that heartwood percentage decreases, bark percentage increases and pith percentage is not affected. Dipteryx panamensis showed both the highest values for specific gravity and the highest mechanic resistance. Both chemical properties and extractives presence were different among species. Heartwood was not possible to preserve in any of the species, though sapwood was. Penetration varied from partial irregular or vascular in the species. The highest durability was for Hieronyma alchorneoides and Vochysia ferruginea, species classified as of high durability. Finally, all species had good performance in the workability tests. The previous results indicate that these species, used for trading reforestation in Costa Rica, have acceptable characteristics to be commercialized and used in wooden products., El presente estudio detalla información de las propiedades físicas, químicas, mecánicas, de secado, preservación y trabajabilidad de la madera de Cordia alliodora, Dipteryx panamensis, Enterolobium cyclocarpum, Hieronyma alchorneoides, Samanea saman y Vochysia ferruginea proveniente de plantaciones forestales en Costa Rica. La variación de las propiedades con respecto a la altura mostró que el porcentaje de duramen disminuyó, el porcentaje de corteza aumentó y el porcentaje de médula no se vio afectado por la altura del árbol. Dipteryx panamensis presentó los valores de peso específico más altos, por lo tanto, también presentó los valores de resistencia mecánica más altos. No fue posible preservar el duramen en ninguna especie, pero la albura sí y su penetración varió de parcial irregular o vascular en las especies. La mayor durabilidad se presentó en Hieronyma alchorneoides y Vochysia ferruginea, especies clasificadas como de alta durabilidad. Finalmente, todas las especies presentaron buen comportamiento en las pruebas de trabajabilidad. Los resultados anteriores indican que estas especies, utilizadas en la reforestación comercial de Costa Rica, poseen características aceptables para ser utilizadas en la comercialización y uso en productos de madera.

Quorum sensing (QS) activity in Ophiostoma fungi has not been described. We have examined the growth conditions on the control of dimorphism in Ophiostoma floccosum, an attractive biocontrol agent against blue-stain fungi, and its relationship with QS activity. In a defined culture medium with L-proline as the N source, a high inoculum size (10(7) c.f.u. ml(-1)) was the principal factor that promoted yeast-like growth. Inoculum size effect can be explained by the secretion of a QS molecule(s) (QSMs) responsible for inducing yeast morphology. QSM candidates were extracted from spent medium and their structure was determined by GC-MS. Three cyclic sesquiterpenes were found. The most abundant molecule, and therefore the principal candidate to be the QSM responsible for yeast growth of O. floccosum, was 1,1,4a-trimethyl-5,6-dimethylene-decalin (C15H24). Other two compounds were also detected.

Aims: For Ophiostoma (Ceratocystis) ulmi, the ability to undergo morphological change is a crucial factor for its virulence. To gain an understanding of quorum-sensing activity in O. ulmi as it relates to yeast-mycelium dimorphism control, this study examines the effects of branched-chain amino acids as well as their fusel alcohols and fusel acids as quorum sensing molecules. Methods and Results: In a defined medium containing glucose, proline and salts, O. ulmi grew as yeasts when the culture was inoculated with a high density of spores (2 × 107 CFU ml−1) and as mycelia when inoculated with a low spore density (4 × 105 CFU ml−1). The cultures displaying yeast morphology secreted a quorum-sensing factor that shifted the morphology from mycelia to yeast. This quorum-sensing molecule was lipophilic and extractable by organic solvents from the spent medium. Using GC/MS analysis, it was determined that the major compound in the extract was 2-methyl-1-butanol. A similar effect was observed when the branched-chain amino acids (fusel alcohol precursors) were used as the nitrogen source. E, E-farnesol had no effect on the morphology of O. ulmi. Conclusions: Addition of the branched-chain amino acids or one of the compounds detected in the spent medium, 2-methyl-1-butanol or 4-hydroxyphenylacetic acid, or methylvaleric acid, decreased germ tube formation by more than 50%, thus demonstrating a quorum sensing molecule behaviour in O. ulmi cultures. Significance and impact of the study: This study presents advances in the investigation of dimorphism in O. ulmi, complementing the existing scientific basis, for studying, understanding and controlling this phenomenon.

Los hongos del genero Ophiostoma promueven la ocurrencia de la mancha azul en madera de coniferas, afectando significativamente la calidad en los productos de apariencia. Para la prevencion de la mancha azul se han empleado productos quimicos de diferente naturaleza. El control biologico de la mancha azul con cepas albinas del genero Ophiostoma aparece como una alternativa de promisorio potencial. Algunos de estos hongos cuando cultivados en medio liquido presentan un crecimiento dimorfico, con alta proporcion de micelio, que dificulta su utilizacion. El dimorfismo, transformacion reversible de las morfologias levadura y micelio, es controlado por factores quimicos y del entorno. En esta investigacion mediante la aplicacion de un diseno factorial completo de dos niveles, se estudio el efecto de cuatro variables operacionales sobre el crecimiento levaduriforme de la cepa albina PcF2A29 de la especie Ophiostoma piceae (Munch) H. & P. Syd., creciendo en medio de cultivo liquido complejo. Los resultados mostraron que el tamano del inoculo, la temperatura y la interaccion tamano del inoculo-temperatura tuvieron un efecto estadistico significativo sobre el crecimiento levaduriforme de la cepa albina PcF2A29de la especie O. piceae. De estas variables, el tamano del inoculo resulto ser el efecto mas importante y explico el 53% de la variabilidad observada. Estos resultados sugieren por primera vez, en la especie O. piceae, la existencia de un mecanismo de deteccion del quorum asociado a la variable tamano del inoculo.

La présente étude vise à établir les variations du duramen (pourcentage, diamètre, rayon, volume) rapportées à la hauteur des arbres et à l’épaisseur de l’aubier, ainsi que l’âge de début de formation du duramen et sa hauteur maximale pour les arbres de l’essence Tectona grandis. Les résultats de l’échantillonnage de seize plantations réparties dans différentes zones du Costa Rica, âgées de 2 à 22 ans, montrent que l’aubier est plus épais entre 2 et 10 ans d’âge qu’entre 10 et 22 ans. La formation du duramen commence à la base des arbres âgés de 2 à 3 ans, mais il n’apparaît à hauteur de poitrine qu’à partir de 3 à 4 ans. Le duramen disparaît à une hauteur allant de 0 à 90 % de la hauteur totale selon l’âge de l’arbre. Enfin, des modèles statistiques prédictifs ont été développés pour l’épaisseur de l’aubier et pour le rayon, la hauteur maximale et le pourcentage du duramen, en se basant sur le modèle Y = K0 + K1*(épaisseur de l’aubier) + K2*(hauteur relative de l’échantillonnage) + K3*(diamètre à hauteur de poitrine) + K4*(âge de l’arbre). Ces modèles indiquent des coefficients de détermination de 70 %, 90 %, 95 %, 73 % et 31 %, respectivement.

Wetwood is commonly reported in temperate species but not so in tropical species. In an old Gmelina arborea Roxb. plantation, wetwood was identified by a darker colour compared with the rest of heartwood; by a higher moisture content (average 182%); and a lower specific gravity (0.34, compared with 0.38 for sapwood and heartwood). Tangential shrinkage was 3.7%, which was significantly higher than that of heartwood and sapwood. Radial shrinkage was not significantly different between wetwood and sapwood, but it was significantly greater (2.6%) in wetwood than in heartwood (1.8%). Wetwood had a significantly higher pH than normal wood, but ash composition was similar to that of normal wood, with the exception of the amounts of iron and potassium. Wetwood and sapwood were less decay resistant than heartwood. Wetwood required less time than heartwood to reach equilibrium moisture content, but more time than sapwood. The tangential and longitudinal diffusion coefficients of wetwood were significantly higher than those of heartwood and lower than those of sapwood. In the radial direction sapwood showed a faster drying rate than wetwood but there was no significant difference between wetwood and heartwood.

Artículo científico Trametes versicolor and Pleurotus ostreatus were used for the biopulping from pineapple leaf fiber (PALF). PALF substrate was subjected to T. versicolor for 2 to 6 weeks and to P. ostreatus for 4 to 8 weeks. The yields, holocellulose and lignin contents, and extractives in ethanol-toluene mixture and in sodium hydroxide (NaOH) solution were evaluated. Fourier transform infrared spectroscopy (FTIR) spectra, thermogravimetric analysis (TGA), and color studies by L*a*b* systems were used for sample analysis. The results showed that the pulp yield was 55% to 70% with P. ostreatus and 35% to 50% with T. versicolor. Longer colonization periods increased the amount of holocellulose and decreased the amount of lignin and extractives in ethanol-toluene and NaOH solution. TGA showed an increase in intensity associated with cellulose, and the observed inflexion was attributed to lignin, which showed a tendency to fade. The FTIR spectrum showed high intensity between 3100 cm-1 and 3600 cm-1 (cellulose) and decreased intensity at 1730 cm-1 (lignin). For both fungi, the pulp color produced an increase in L* color parameter and decreased in yellowness, while little variation was observed in redness. The most appropriate colonization period was 5 weeks for P. ostreatus and 4 weeks for T. versicolor.

Costa Rica has successfully planted various forestry species for wood production. However, the use of their wood is limited, due to poor knowledge about their chemical properties, air-dry, preserved and workability performance. The present study details information of these properties for the species: Alnus acuminata (Aa), Acacia mangium (Am), Bombacopsis quinata (Bq), Cupressus lusitanica (Cl), Swietenia macrophylla (Sm), Terminalia amazonia (Ta), Terminalia oblonga (To) and Vochysia guatemalensis (Vg). Among the results obtained, it was found that the wood of these species is in general slightly acidic, except Bq, which presented tendency to be basic. Different species show considerable variability in the content of holocellulose, lignin and extractable micronutrients. Regarding micronutrients, and in relation to other species it was found a high percentage in Vg. The use of boron as a preservative, may be applied in the 8 plantation species. The presence of heartwood in some species made it not possible to be preserved by the vacuum-pressure method, but the sapwood was possible to preserve in all species. The drying rate increased with increasing board thickness and drying time was different among species. The fastest drying rate was found in Ta and Am, followed by Sm, To, Aa and Cl with intermediate values and Vg with the slowest air-drying rate. Am, Bq, Cl, Sm and To present from excellent to good planing, sanding , drilling and molding, but Ta, Bq, Aa and Vg, especially Aa and Vg, in the workability operations were catalogued as poor or very poor quality.Evaluación de la composición química, secado al aire, preservación y trabajabilidad de ocho especies de rápido crecimiento en plantación de Costa RicaEn Costa Rica se han plantado con éxito varias especies forestales para la producción de madera. No obstante, el uso de la madera es limitado debido al poco conocimiento acerca de sus propiedades químicas, secado al aire, preservado y trabajabilidad. En el presente estudio se detalla información de esas propiedades para las especies: Alnus acuminata (Aa), Acacia mangium (Am), Bombacopsis quinata (Bq), Cupressus lusitanica (Cl), Swietenia macrophylla (Sm), Terminalia amazonia (Ta), Terminalia oblonga (To) and Vochysia guatemalensis (Vg). Dentro de los resultados obtenidos, se encontró que la madera presenta un pH ligeramente ácido, a excepción de Bq, con tendencia a ser básica. Las diferentes especies muestran una considerable variabilidad en el contenido de holocelulosa, lignina, extraíbles y micronutrientes; con respecto a los micronutrientes, y en relación con las otras especies se encontró un alto porcentaje en Vg. El uso de boro como preservador, puede ser aplicado en las 8 especies de plantación. Las especies con presencia de duramen no fue posible preservarlas con el método vacío-presión; sin embargo, la albura sí es posible de preservar en todas las especies. El tiempo de secado incrementa con el incremento de espesor de la tabla y presenta variación entre especies. El menor tiempo de secado se encontró para Ta y Am, seguido por Sm, To, Aa y Cl, con valores intermedios y Vg con el secado al aire más lento. Am, Bq, Cl, Sm y To presentan de excelentes a buenas propiedades de cepillado, lijado, taladrado y moldurado, pero el resto de las especies (Ta, Bq, Aa and Vg), en especial para Aa y Vg, en las operaciones de trabajabilidad son catalogadas como de mala o muy pobre calidad.